spi: clps711x: Remove <mach/hardware.h> dependency
This patch removes <mach/hardware.h> dependency. This is performed
by replace hard coded used memory regions and interrupt to getting
these values from resources passed to the driver. For the system-wide
registers we now able to use SYSCON driver.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Mark Brown <broonie@linaro.org>
diff --git a/drivers/spi/spi-clps711x.c b/drivers/spi/spi-clps711x.c
index ab010c0..d9eec4e 100644
--- a/drivers/spi/spi-clps711x.c
+++ b/drivers/spi/spi-clps711x.c
@@ -17,14 +17,21 @@
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/clps711x.h>
#include <linux/spi/spi.h>
#include <linux/platform_data/spi-clps711x.h>
-#include <mach/hardware.h>
-
#define DRIVER_NAME "spi-clps711x"
+#define SYNCIO_FRMLEN(x) ((x) << 8)
+#define SYNCIO_TXFRMEN (1 << 14)
+
struct spi_clps711x_data {
+ void __iomem *syncio;
+ struct regmap *syscon;
+ struct regmap *syscon1;
struct clk *spi_clk;
u32 max_speed_hz;
@@ -49,31 +56,29 @@
/* Setup SPI frequency divider */
if (!xfer->speed_hz || (xfer->speed_hz >= hw->max_speed_hz))
- clps_writel((clps_readl(SYSCON1) & ~SYSCON1_ADCKSEL_MASK) |
- SYSCON1_ADCKSEL(3), SYSCON1);
+ regmap_update_bits(hw->syscon1, SYSCON_OFFSET,
+ SYSCON1_ADCKSEL_MASK, SYSCON1_ADCKSEL(3));
else if (xfer->speed_hz >= (hw->max_speed_hz / 2))
- clps_writel((clps_readl(SYSCON1) & ~SYSCON1_ADCKSEL_MASK) |
- SYSCON1_ADCKSEL(2), SYSCON1);
+ regmap_update_bits(hw->syscon1, SYSCON_OFFSET,
+ SYSCON1_ADCKSEL_MASK, SYSCON1_ADCKSEL(2));
else if (xfer->speed_hz >= (hw->max_speed_hz / 8))
- clps_writel((clps_readl(SYSCON1) & ~SYSCON1_ADCKSEL_MASK) |
- SYSCON1_ADCKSEL(1), SYSCON1);
+ regmap_update_bits(hw->syscon1, SYSCON_OFFSET,
+ SYSCON1_ADCKSEL_MASK, SYSCON1_ADCKSEL(1));
else
- clps_writel((clps_readl(SYSCON1) & ~SYSCON1_ADCKSEL_MASK) |
- SYSCON1_ADCKSEL(0), SYSCON1);
+ regmap_update_bits(hw->syscon1, SYSCON_OFFSET,
+ SYSCON1_ADCKSEL_MASK, SYSCON1_ADCKSEL(0));
}
static int spi_clps711x_prepare_message(struct spi_master *master,
struct spi_message *msg)
{
+ struct spi_clps711x_data *hw = spi_master_get_devdata(master);
struct spi_device *spi = msg->spi;
- /* Setup edge for transfer */
- if (spi->mode & SPI_CPHA)
- clps_writew(clps_readw(SYSCON3) | SYSCON3_ADCCKNSEN, SYSCON3);
- else
- clps_writew(clps_readw(SYSCON3) & ~SYSCON3_ADCCKNSEN, SYSCON3);
-
- return 0;
+ /* Setup mode for transfer */
+ return regmap_update_bits(hw->syscon, SYSCON_OFFSET, SYSCON3_ADCCKNSEN,
+ (spi->mode & SPI_CPHA) ?
+ SYSCON3_ADCCKNSEN : 0);
}
static int spi_clps711x_transfer_one(struct spi_master *master,
@@ -92,7 +97,8 @@
/* Initiate transfer */
data = hw->tx_buf ? *hw->tx_buf++ : 0;
- clps_writel(data | SYNCIO_FRMLEN(hw->bpw) | SYNCIO_TXFRMEN, SYNCIO);
+ writel(data | SYNCIO_FRMLEN(hw->bpw) | SYNCIO_TXFRMEN, hw->syncio);
+
return 1;
}
@@ -103,15 +109,15 @@
u8 data;
/* Handle RX */
- data = clps_readb(SYNCIO);
+ data = readb(hw->syncio);
if (hw->rx_buf)
*hw->rx_buf++ = data;
/* Handle TX */
if (--hw->len > 0) {
data = hw->tx_buf ? *hw->tx_buf++ : 0;
- clps_writel(data | SYNCIO_FRMLEN(hw->bpw) | SYNCIO_TXFRMEN,
- SYNCIO);
+ writel(data | SYNCIO_FRMLEN(hw->bpw) | SYNCIO_TXFRMEN,
+ hw->syncio);
} else
spi_finalize_current_transfer(master);
@@ -120,10 +126,11 @@
static int spi_clps711x_probe(struct platform_device *pdev)
{
- int i, ret;
- struct spi_master *master;
struct spi_clps711x_data *hw;
struct spi_clps711x_pdata *pdata = dev_get_platdata(&pdev->dev);
+ struct spi_master *master;
+ struct resource *res;
+ int i, irq, ret;
if (!pdata) {
dev_err(&pdev->dev, "No platform data supplied\n");
@@ -135,6 +142,10 @@
return -EINVAL;
}
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
master = spi_alloc_master(&pdev->dev, sizeof(*hw));
if (!master)
return -ENOMEM;
@@ -176,19 +187,36 @@
platform_set_drvdata(pdev, master);
- /* Disable extended mode due hardware problems */
- clps_writew(clps_readw(SYSCON3) & ~SYSCON3_ADCCON, SYSCON3);
-
- /* Clear possible pending interrupt */
- clps_readl(SYNCIO);
-
- ret = devm_request_irq(&pdev->dev, IRQ_SSEOTI, spi_clps711x_isr, 0,
- dev_name(&pdev->dev), master);
- if (ret) {
- dev_err(&pdev->dev, "Can't request IRQ\n");
+ hw->syscon = syscon_regmap_lookup_by_pdevname("syscon.3");
+ if (IS_ERR(hw->syscon)) {
+ ret = PTR_ERR(hw->syscon);
goto err_out;
}
+ hw->syscon1 = syscon_regmap_lookup_by_pdevname("syscon.1");
+ if (IS_ERR(hw->syscon1)) {
+ ret = PTR_ERR(hw->syscon1);
+ goto err_out;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ hw->syncio = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(hw->syncio)) {
+ ret = PTR_ERR(hw->syncio);
+ goto err_out;
+ }
+
+ /* Disable extended mode due hardware problems */
+ regmap_update_bits(hw->syscon, SYSCON_OFFSET, SYSCON3_ADCCON, 0);
+
+ /* Clear possible pending interrupt */
+ readl(hw->syncio);
+
+ ret = devm_request_irq(&pdev->dev, irq, spi_clps711x_isr, 0,
+ dev_name(&pdev->dev), master);
+ if (ret)
+ goto err_out;
+
ret = devm_spi_register_master(&pdev->dev, master);
if (!ret) {
dev_info(&pdev->dev,