| /* |
| * linux/arch/arm/vfp/vfpmodule.c |
| * |
| * Copyright (C) 2004 ARM Limited. |
| * Written by Deep Blue Solutions Limited. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| #include <linux/types.h> |
| #include <linux/cpu.h> |
| #include <linux/cpu_pm.h> |
| #include <linux/hardirq.h> |
| #include <linux/kernel.h> |
| #include <linux/notifier.h> |
| #include <linux/signal.h> |
| #include <linux/sched/signal.h> |
| #include <linux/smp.h> |
| #include <linux/init.h> |
| #include <linux/uaccess.h> |
| #include <linux/user.h> |
| #include <linux/export.h> |
| |
| #include <asm/cp15.h> |
| #include <asm/cputype.h> |
| #include <asm/system_info.h> |
| #include <asm/thread_notify.h> |
| #include <asm/vfp.h> |
| |
| #include "vfpinstr.h" |
| #include "vfp.h" |
| |
| /* |
| * Our undef handlers (in entry.S) |
| */ |
| asmlinkage void vfp_testing_entry(void); |
| asmlinkage void vfp_support_entry(void); |
| asmlinkage void vfp_null_entry(void); |
| |
| asmlinkage void (*vfp_vector)(void) = vfp_null_entry; |
| |
| /* |
| * Dual-use variable. |
| * Used in startup: set to non-zero if VFP checks fail |
| * After startup, holds VFP architecture |
| */ |
| unsigned int VFP_arch; |
| |
| /* |
| * The pointer to the vfpstate structure of the thread which currently |
| * owns the context held in the VFP hardware, or NULL if the hardware |
| * context is invalid. |
| * |
| * For UP, this is sufficient to tell which thread owns the VFP context. |
| * However, for SMP, we also need to check the CPU number stored in the |
| * saved state too to catch migrations. |
| */ |
| union vfp_state *vfp_current_hw_state[NR_CPUS]; |
| |
| /* |
| * Is 'thread's most up to date state stored in this CPUs hardware? |
| * Must be called from non-preemptible context. |
| */ |
| static bool vfp_state_in_hw(unsigned int cpu, struct thread_info *thread) |
| { |
| #ifdef CONFIG_SMP |
| if (thread->vfpstate.hard.cpu != cpu) |
| return false; |
| #endif |
| return vfp_current_hw_state[cpu] == &thread->vfpstate; |
| } |
| |
| /* |
| * Force a reload of the VFP context from the thread structure. We do |
| * this by ensuring that access to the VFP hardware is disabled, and |
| * clear vfp_current_hw_state. Must be called from non-preemptible context. |
| */ |
| static void vfp_force_reload(unsigned int cpu, struct thread_info *thread) |
| { |
| if (vfp_state_in_hw(cpu, thread)) { |
| fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN); |
| vfp_current_hw_state[cpu] = NULL; |
| } |
| #ifdef CONFIG_SMP |
| thread->vfpstate.hard.cpu = NR_CPUS; |
| #endif |
| } |
| |
| /* |
| * Per-thread VFP initialization. |
| */ |
| static void vfp_thread_flush(struct thread_info *thread) |
| { |
| union vfp_state *vfp = &thread->vfpstate; |
| unsigned int cpu; |
| |
| /* |
| * Disable VFP to ensure we initialize it first. We must ensure |
| * that the modification of vfp_current_hw_state[] and hardware |
| * disable are done for the same CPU and without preemption. |
| * |
| * Do this first to ensure that preemption won't overwrite our |
| * state saving should access to the VFP be enabled at this point. |
| */ |
| cpu = get_cpu(); |
| if (vfp_current_hw_state[cpu] == vfp) |
| vfp_current_hw_state[cpu] = NULL; |
| fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN); |
| put_cpu(); |
| |
| memset(vfp, 0, sizeof(union vfp_state)); |
| |
| vfp->hard.fpexc = FPEXC_EN; |
| vfp->hard.fpscr = FPSCR_ROUND_NEAREST; |
| #ifdef CONFIG_SMP |
| vfp->hard.cpu = NR_CPUS; |
| #endif |
| } |
| |
| static void vfp_thread_exit(struct thread_info *thread) |
| { |
| /* release case: Per-thread VFP cleanup. */ |
| union vfp_state *vfp = &thread->vfpstate; |
| unsigned int cpu = get_cpu(); |
| |
| if (vfp_current_hw_state[cpu] == vfp) |
| vfp_current_hw_state[cpu] = NULL; |
| put_cpu(); |
| } |
| |
| static void vfp_thread_copy(struct thread_info *thread) |
| { |
| struct thread_info *parent = current_thread_info(); |
| |
| vfp_sync_hwstate(parent); |
| thread->vfpstate = parent->vfpstate; |
| #ifdef CONFIG_SMP |
| thread->vfpstate.hard.cpu = NR_CPUS; |
| #endif |
| } |
| |
| /* |
| * When this function is called with the following 'cmd's, the following |
| * is true while this function is being run: |
| * THREAD_NOFTIFY_SWTICH: |
| * - the previously running thread will not be scheduled onto another CPU. |
| * - the next thread to be run (v) will not be running on another CPU. |
| * - thread->cpu is the local CPU number |
| * - not preemptible as we're called in the middle of a thread switch |
| * THREAD_NOTIFY_FLUSH: |
| * - the thread (v) will be running on the local CPU, so |
| * v === current_thread_info() |
| * - thread->cpu is the local CPU number at the time it is accessed, |
| * but may change at any time. |
| * - we could be preempted if tree preempt rcu is enabled, so |
| * it is unsafe to use thread->cpu. |
| * THREAD_NOTIFY_EXIT |
| * - we could be preempted if tree preempt rcu is enabled, so |
| * it is unsafe to use thread->cpu. |
| */ |
| static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v) |
| { |
| struct thread_info *thread = v; |
| u32 fpexc; |
| #ifdef CONFIG_SMP |
| unsigned int cpu; |
| #endif |
| |
| switch (cmd) { |
| case THREAD_NOTIFY_SWITCH: |
| fpexc = fmrx(FPEXC); |
| |
| #ifdef CONFIG_SMP |
| cpu = thread->cpu; |
| |
| /* |
| * On SMP, if VFP is enabled, save the old state in |
| * case the thread migrates to a different CPU. The |
| * restoring is done lazily. |
| */ |
| if ((fpexc & FPEXC_EN) && vfp_current_hw_state[cpu]) |
| vfp_save_state(vfp_current_hw_state[cpu], fpexc); |
| #endif |
| |
| /* |
| * Always disable VFP so we can lazily save/restore the |
| * old state. |
| */ |
| fmxr(FPEXC, fpexc & ~FPEXC_EN); |
| break; |
| |
| case THREAD_NOTIFY_FLUSH: |
| vfp_thread_flush(thread); |
| break; |
| |
| case THREAD_NOTIFY_EXIT: |
| vfp_thread_exit(thread); |
| break; |
| |
| case THREAD_NOTIFY_COPY: |
| vfp_thread_copy(thread); |
| break; |
| } |
| |
| return NOTIFY_DONE; |
| } |
| |
| static struct notifier_block vfp_notifier_block = { |
| .notifier_call = vfp_notifier, |
| }; |
| |
| /* |
| * Raise a SIGFPE for the current process. |
| * sicode describes the signal being raised. |
| */ |
| static void vfp_raise_sigfpe(unsigned int sicode, struct pt_regs *regs) |
| { |
| siginfo_t info; |
| |
| clear_siginfo(&info); |
| info.si_signo = SIGFPE; |
| info.si_code = sicode; |
| info.si_addr = (void __user *)(instruction_pointer(regs) - 4); |
| |
| /* |
| * This is the same as NWFPE, because it's not clear what |
| * this is used for |
| */ |
| current->thread.error_code = 0; |
| current->thread.trap_no = 6; |
| |
| send_sig_info(SIGFPE, &info, current); |
| } |
| |
| static void vfp_panic(char *reason, u32 inst) |
| { |
| int i; |
| |
| pr_err("VFP: Error: %s\n", reason); |
| pr_err("VFP: EXC 0x%08x SCR 0x%08x INST 0x%08x\n", |
| fmrx(FPEXC), fmrx(FPSCR), inst); |
| for (i = 0; i < 32; i += 2) |
| pr_err("VFP: s%2u: 0x%08x s%2u: 0x%08x\n", |
| i, vfp_get_float(i), i+1, vfp_get_float(i+1)); |
| } |
| |
| /* |
| * Process bitmask of exception conditions. |
| */ |
| static void vfp_raise_exceptions(u32 exceptions, u32 inst, u32 fpscr, struct pt_regs *regs) |
| { |
| int si_code = 0; |
| |
| pr_debug("VFP: raising exceptions %08x\n", exceptions); |
| |
| if (exceptions == VFP_EXCEPTION_ERROR) { |
| vfp_panic("unhandled bounce", inst); |
| vfp_raise_sigfpe(FPE_FIXME, regs); |
| return; |
| } |
| |
| /* |
| * If any of the status flags are set, update the FPSCR. |
| * Comparison instructions always return at least one of |
| * these flags set. |
| */ |
| if (exceptions & (FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V)) |
| fpscr &= ~(FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V); |
| |
| fpscr |= exceptions; |
| |
| fmxr(FPSCR, fpscr); |
| |
| #define RAISE(stat,en,sig) \ |
| if (exceptions & stat && fpscr & en) \ |
| si_code = sig; |
| |
| /* |
| * These are arranged in priority order, least to highest. |
| */ |
| RAISE(FPSCR_DZC, FPSCR_DZE, FPE_FLTDIV); |
| RAISE(FPSCR_IXC, FPSCR_IXE, FPE_FLTRES); |
| RAISE(FPSCR_UFC, FPSCR_UFE, FPE_FLTUND); |
| RAISE(FPSCR_OFC, FPSCR_OFE, FPE_FLTOVF); |
| RAISE(FPSCR_IOC, FPSCR_IOE, FPE_FLTINV); |
| |
| if (si_code) |
| vfp_raise_sigfpe(si_code, regs); |
| } |
| |
| /* |
| * Emulate a VFP instruction. |
| */ |
| static u32 vfp_emulate_instruction(u32 inst, u32 fpscr, struct pt_regs *regs) |
| { |
| u32 exceptions = VFP_EXCEPTION_ERROR; |
| |
| pr_debug("VFP: emulate: INST=0x%08x SCR=0x%08x\n", inst, fpscr); |
| |
| if (INST_CPRTDO(inst)) { |
| if (!INST_CPRT(inst)) { |
| /* |
| * CPDO |
| */ |
| if (vfp_single(inst)) { |
| exceptions = vfp_single_cpdo(inst, fpscr); |
| } else { |
| exceptions = vfp_double_cpdo(inst, fpscr); |
| } |
| } else { |
| /* |
| * A CPRT instruction can not appear in FPINST2, nor |
| * can it cause an exception. Therefore, we do not |
| * have to emulate it. |
| */ |
| } |
| } else { |
| /* |
| * A CPDT instruction can not appear in FPINST2, nor can |
| * it cause an exception. Therefore, we do not have to |
| * emulate it. |
| */ |
| } |
| return exceptions & ~VFP_NAN_FLAG; |
| } |
| |
| /* |
| * Package up a bounce condition. |
| */ |
| void VFP_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs) |
| { |
| u32 fpscr, orig_fpscr, fpsid, exceptions; |
| |
| pr_debug("VFP: bounce: trigger %08x fpexc %08x\n", trigger, fpexc); |
| |
| /* |
| * At this point, FPEXC can have the following configuration: |
| * |
| * EX DEX IXE |
| * 0 1 x - synchronous exception |
| * 1 x 0 - asynchronous exception |
| * 1 x 1 - sychronous on VFP subarch 1 and asynchronous on later |
| * 0 0 1 - synchronous on VFP9 (non-standard subarch 1 |
| * implementation), undefined otherwise |
| * |
| * Clear various bits and enable access to the VFP so we can |
| * handle the bounce. |
| */ |
| fmxr(FPEXC, fpexc & ~(FPEXC_EX|FPEXC_DEX|FPEXC_FP2V|FPEXC_VV|FPEXC_TRAP_MASK)); |
| |
| fpsid = fmrx(FPSID); |
| orig_fpscr = fpscr = fmrx(FPSCR); |
| |
| /* |
| * Check for the special VFP subarch 1 and FPSCR.IXE bit case |
| */ |
| if ((fpsid & FPSID_ARCH_MASK) == (1 << FPSID_ARCH_BIT) |
| && (fpscr & FPSCR_IXE)) { |
| /* |
| * Synchronous exception, emulate the trigger instruction |
| */ |
| goto emulate; |
| } |
| |
| if (fpexc & FPEXC_EX) { |
| #ifndef CONFIG_CPU_FEROCEON |
| /* |
| * Asynchronous exception. The instruction is read from FPINST |
| * and the interrupted instruction has to be restarted. |
| */ |
| trigger = fmrx(FPINST); |
| regs->ARM_pc -= 4; |
| #endif |
| } else if (!(fpexc & FPEXC_DEX)) { |
| /* |
| * Illegal combination of bits. It can be caused by an |
| * unallocated VFP instruction but with FPSCR.IXE set and not |
| * on VFP subarch 1. |
| */ |
| vfp_raise_exceptions(VFP_EXCEPTION_ERROR, trigger, fpscr, regs); |
| goto exit; |
| } |
| |
| /* |
| * Modify fpscr to indicate the number of iterations remaining. |
| * If FPEXC.EX is 0, FPEXC.DEX is 1 and the FPEXC.VV bit indicates |
| * whether FPEXC.VECITR or FPSCR.LEN is used. |
| */ |
| if (fpexc & (FPEXC_EX | FPEXC_VV)) { |
| u32 len; |
| |
| len = fpexc + (1 << FPEXC_LENGTH_BIT); |
| |
| fpscr &= ~FPSCR_LENGTH_MASK; |
| fpscr |= (len & FPEXC_LENGTH_MASK) << (FPSCR_LENGTH_BIT - FPEXC_LENGTH_BIT); |
| } |
| |
| /* |
| * Handle the first FP instruction. We used to take note of the |
| * FPEXC bounce reason, but this appears to be unreliable. |
| * Emulate the bounced instruction instead. |
| */ |
| exceptions = vfp_emulate_instruction(trigger, fpscr, regs); |
| if (exceptions) |
| vfp_raise_exceptions(exceptions, trigger, orig_fpscr, regs); |
| |
| /* |
| * If there isn't a second FP instruction, exit now. Note that |
| * the FPEXC.FP2V bit is valid only if FPEXC.EX is 1. |
| */ |
| if ((fpexc & (FPEXC_EX | FPEXC_FP2V)) != (FPEXC_EX | FPEXC_FP2V)) |
| goto exit; |
| |
| /* |
| * The barrier() here prevents fpinst2 being read |
| * before the condition above. |
| */ |
| barrier(); |
| trigger = fmrx(FPINST2); |
| |
| emulate: |
| exceptions = vfp_emulate_instruction(trigger, orig_fpscr, regs); |
| if (exceptions) |
| vfp_raise_exceptions(exceptions, trigger, orig_fpscr, regs); |
| exit: |
| preempt_enable(); |
| } |
| |
| static void vfp_enable(void *unused) |
| { |
| u32 access; |
| |
| BUG_ON(preemptible()); |
| access = get_copro_access(); |
| |
| /* |
| * Enable full access to VFP (cp10 and cp11) |
| */ |
| set_copro_access(access | CPACC_FULL(10) | CPACC_FULL(11)); |
| } |
| |
| /* Called by platforms on which we want to disable VFP because it may not be |
| * present on all CPUs within a SMP complex. Needs to be called prior to |
| * vfp_init(). |
| */ |
| void vfp_disable(void) |
| { |
| if (VFP_arch) { |
| pr_debug("%s: should be called prior to vfp_init\n", __func__); |
| return; |
| } |
| VFP_arch = 1; |
| } |
| |
| #ifdef CONFIG_CPU_PM |
| static int vfp_pm_suspend(void) |
| { |
| struct thread_info *ti = current_thread_info(); |
| u32 fpexc = fmrx(FPEXC); |
| |
| /* if vfp is on, then save state for resumption */ |
| if (fpexc & FPEXC_EN) { |
| pr_debug("%s: saving vfp state\n", __func__); |
| vfp_save_state(&ti->vfpstate, fpexc); |
| |
| /* disable, just in case */ |
| fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN); |
| } else if (vfp_current_hw_state[ti->cpu]) { |
| #ifndef CONFIG_SMP |
| fmxr(FPEXC, fpexc | FPEXC_EN); |
| vfp_save_state(vfp_current_hw_state[ti->cpu], fpexc); |
| fmxr(FPEXC, fpexc); |
| #endif |
| } |
| |
| /* clear any information we had about last context state */ |
| vfp_current_hw_state[ti->cpu] = NULL; |
| |
| return 0; |
| } |
| |
| static void vfp_pm_resume(void) |
| { |
| /* ensure we have access to the vfp */ |
| vfp_enable(NULL); |
| |
| /* and disable it to ensure the next usage restores the state */ |
| fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN); |
| } |
| |
| static int vfp_cpu_pm_notifier(struct notifier_block *self, unsigned long cmd, |
| void *v) |
| { |
| switch (cmd) { |
| case CPU_PM_ENTER: |
| vfp_pm_suspend(); |
| break; |
| case CPU_PM_ENTER_FAILED: |
| case CPU_PM_EXIT: |
| vfp_pm_resume(); |
| break; |
| } |
| return NOTIFY_OK; |
| } |
| |
| static struct notifier_block vfp_cpu_pm_notifier_block = { |
| .notifier_call = vfp_cpu_pm_notifier, |
| }; |
| |
| static void vfp_pm_init(void) |
| { |
| cpu_pm_register_notifier(&vfp_cpu_pm_notifier_block); |
| } |
| |
| #else |
| static inline void vfp_pm_init(void) { } |
| #endif /* CONFIG_CPU_PM */ |
| |
| /* |
| * Ensure that the VFP state stored in 'thread->vfpstate' is up to date |
| * with the hardware state. |
| */ |
| void vfp_sync_hwstate(struct thread_info *thread) |
| { |
| unsigned int cpu = get_cpu(); |
| |
| if (vfp_state_in_hw(cpu, thread)) { |
| u32 fpexc = fmrx(FPEXC); |
| |
| /* |
| * Save the last VFP state on this CPU. |
| */ |
| fmxr(FPEXC, fpexc | FPEXC_EN); |
| vfp_save_state(&thread->vfpstate, fpexc | FPEXC_EN); |
| fmxr(FPEXC, fpexc); |
| } |
| |
| put_cpu(); |
| } |
| |
| /* Ensure that the thread reloads the hardware VFP state on the next use. */ |
| void vfp_flush_hwstate(struct thread_info *thread) |
| { |
| unsigned int cpu = get_cpu(); |
| |
| vfp_force_reload(cpu, thread); |
| |
| put_cpu(); |
| } |
| |
| /* |
| * Save the current VFP state into the provided structures and prepare |
| * for entry into a new function (signal handler). |
| */ |
| int vfp_preserve_user_clear_hwstate(struct user_vfp __user *ufp, |
| struct user_vfp_exc __user *ufp_exc) |
| { |
| struct thread_info *thread = current_thread_info(); |
| struct vfp_hard_struct *hwstate = &thread->vfpstate.hard; |
| int err = 0; |
| |
| /* Ensure that the saved hwstate is up-to-date. */ |
| vfp_sync_hwstate(thread); |
| |
| /* |
| * Copy the floating point registers. There can be unused |
| * registers see asm/hwcap.h for details. |
| */ |
| err |= __copy_to_user(&ufp->fpregs, &hwstate->fpregs, |
| sizeof(hwstate->fpregs)); |
| /* |
| * Copy the status and control register. |
| */ |
| __put_user_error(hwstate->fpscr, &ufp->fpscr, err); |
| |
| /* |
| * Copy the exception registers. |
| */ |
| __put_user_error(hwstate->fpexc, &ufp_exc->fpexc, err); |
| __put_user_error(hwstate->fpinst, &ufp_exc->fpinst, err); |
| __put_user_error(hwstate->fpinst2, &ufp_exc->fpinst2, err); |
| |
| if (err) |
| return -EFAULT; |
| |
| /* Ensure that VFP is disabled. */ |
| vfp_flush_hwstate(thread); |
| |
| /* |
| * As per the PCS, clear the length and stride bits for function |
| * entry. |
| */ |
| hwstate->fpscr &= ~(FPSCR_LENGTH_MASK | FPSCR_STRIDE_MASK); |
| return 0; |
| } |
| |
| /* Sanitise and restore the current VFP state from the provided structures. */ |
| int vfp_restore_user_hwstate(struct user_vfp __user *ufp, |
| struct user_vfp_exc __user *ufp_exc) |
| { |
| struct thread_info *thread = current_thread_info(); |
| struct vfp_hard_struct *hwstate = &thread->vfpstate.hard; |
| unsigned long fpexc; |
| int err = 0; |
| |
| /* Disable VFP to avoid corrupting the new thread state. */ |
| vfp_flush_hwstate(thread); |
| |
| /* |
| * Copy the floating point registers. There can be unused |
| * registers see asm/hwcap.h for details. |
| */ |
| err |= __copy_from_user(&hwstate->fpregs, &ufp->fpregs, |
| sizeof(hwstate->fpregs)); |
| /* |
| * Copy the status and control register. |
| */ |
| __get_user_error(hwstate->fpscr, &ufp->fpscr, err); |
| |
| /* |
| * Sanitise and restore the exception registers. |
| */ |
| __get_user_error(fpexc, &ufp_exc->fpexc, err); |
| |
| /* Ensure the VFP is enabled. */ |
| fpexc |= FPEXC_EN; |
| |
| /* Ensure FPINST2 is invalid and the exception flag is cleared. */ |
| fpexc &= ~(FPEXC_EX | FPEXC_FP2V); |
| hwstate->fpexc = fpexc; |
| |
| __get_user_error(hwstate->fpinst, &ufp_exc->fpinst, err); |
| __get_user_error(hwstate->fpinst2, &ufp_exc->fpinst2, err); |
| |
| return err ? -EFAULT : 0; |
| } |
| |
| /* |
| * VFP hardware can lose all context when a CPU goes offline. |
| * As we will be running in SMP mode with CPU hotplug, we will save the |
| * hardware state at every thread switch. We clear our held state when |
| * a CPU has been killed, indicating that the VFP hardware doesn't contain |
| * a threads VFP state. When a CPU starts up, we re-enable access to the |
| * VFP hardware. The callbacks below are called on the CPU which |
| * is being offlined/onlined. |
| */ |
| static int vfp_dying_cpu(unsigned int cpu) |
| { |
| vfp_current_hw_state[cpu] = NULL; |
| return 0; |
| } |
| |
| static int vfp_starting_cpu(unsigned int unused) |
| { |
| vfp_enable(NULL); |
| return 0; |
| } |
| |
| void vfp_kmode_exception(void) |
| { |
| /* |
| * If we reach this point, a floating point exception has been raised |
| * while running in kernel mode. If the NEON/VFP unit was enabled at the |
| * time, it means a VFP instruction has been issued that requires |
| * software assistance to complete, something which is not currently |
| * supported in kernel mode. |
| * If the NEON/VFP unit was disabled, and the location pointed to below |
| * is properly preceded by a call to kernel_neon_begin(), something has |
| * caused the task to be scheduled out and back in again. In this case, |
| * rebuilding and running with CONFIG_DEBUG_ATOMIC_SLEEP enabled should |
| * be helpful in localizing the problem. |
| */ |
| if (fmrx(FPEXC) & FPEXC_EN) |
| pr_crit("BUG: unsupported FP instruction in kernel mode\n"); |
| else |
| pr_crit("BUG: FP instruction issued in kernel mode with FP unit disabled\n"); |
| } |
| |
| #ifdef CONFIG_KERNEL_MODE_NEON |
| |
| /* |
| * Kernel-side NEON support functions |
| */ |
| void kernel_neon_begin(void) |
| { |
| struct thread_info *thread = current_thread_info(); |
| unsigned int cpu; |
| u32 fpexc; |
| |
| /* |
| * Kernel mode NEON is only allowed outside of interrupt context |
| * with preemption disabled. This will make sure that the kernel |
| * mode NEON register contents never need to be preserved. |
| */ |
| BUG_ON(in_interrupt()); |
| cpu = get_cpu(); |
| |
| fpexc = fmrx(FPEXC) | FPEXC_EN; |
| fmxr(FPEXC, fpexc); |
| |
| /* |
| * Save the userland NEON/VFP state. Under UP, |
| * the owner could be a task other than 'current' |
| */ |
| if (vfp_state_in_hw(cpu, thread)) |
| vfp_save_state(&thread->vfpstate, fpexc); |
| #ifndef CONFIG_SMP |
| else if (vfp_current_hw_state[cpu] != NULL) |
| vfp_save_state(vfp_current_hw_state[cpu], fpexc); |
| #endif |
| vfp_current_hw_state[cpu] = NULL; |
| } |
| EXPORT_SYMBOL(kernel_neon_begin); |
| |
| void kernel_neon_end(void) |
| { |
| /* Disable the NEON/VFP unit. */ |
| fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN); |
| put_cpu(); |
| } |
| EXPORT_SYMBOL(kernel_neon_end); |
| |
| #endif /* CONFIG_KERNEL_MODE_NEON */ |
| |
| /* |
| * VFP support code initialisation. |
| */ |
| static int __init vfp_init(void) |
| { |
| unsigned int vfpsid; |
| unsigned int cpu_arch = cpu_architecture(); |
| |
| /* |
| * Enable the access to the VFP on all online CPUs so the |
| * following test on FPSID will succeed. |
| */ |
| if (cpu_arch >= CPU_ARCH_ARMv6) |
| on_each_cpu(vfp_enable, NULL, 1); |
| |
| /* |
| * First check that there is a VFP that we can use. |
| * The handler is already setup to just log calls, so |
| * we just need to read the VFPSID register. |
| */ |
| vfp_vector = vfp_testing_entry; |
| barrier(); |
| vfpsid = fmrx(FPSID); |
| barrier(); |
| vfp_vector = vfp_null_entry; |
| |
| pr_info("VFP support v0.3: "); |
| if (VFP_arch) { |
| pr_cont("not present\n"); |
| return 0; |
| /* Extract the architecture on CPUID scheme */ |
| } else if ((read_cpuid_id() & 0x000f0000) == 0x000f0000) { |
| VFP_arch = vfpsid & FPSID_CPUID_ARCH_MASK; |
| VFP_arch >>= FPSID_ARCH_BIT; |
| /* |
| * Check for the presence of the Advanced SIMD |
| * load/store instructions, integer and single |
| * precision floating point operations. Only check |
| * for NEON if the hardware has the MVFR registers. |
| */ |
| if (IS_ENABLED(CONFIG_NEON) && |
| (fmrx(MVFR1) & 0x000fff00) == 0x00011100) |
| elf_hwcap |= HWCAP_NEON; |
| |
| if (IS_ENABLED(CONFIG_VFPv3)) { |
| u32 mvfr0 = fmrx(MVFR0); |
| if (((mvfr0 & MVFR0_DP_MASK) >> MVFR0_DP_BIT) == 0x2 || |
| ((mvfr0 & MVFR0_SP_MASK) >> MVFR0_SP_BIT) == 0x2) { |
| elf_hwcap |= HWCAP_VFPv3; |
| /* |
| * Check for VFPv3 D16 and VFPv4 D16. CPUs in |
| * this configuration only have 16 x 64bit |
| * registers. |
| */ |
| if ((mvfr0 & MVFR0_A_SIMD_MASK) == 1) |
| /* also v4-D16 */ |
| elf_hwcap |= HWCAP_VFPv3D16; |
| else |
| elf_hwcap |= HWCAP_VFPD32; |
| } |
| |
| if ((fmrx(MVFR1) & 0xf0000000) == 0x10000000) |
| elf_hwcap |= HWCAP_VFPv4; |
| } |
| /* Extract the architecture version on pre-cpuid scheme */ |
| } else { |
| if (vfpsid & FPSID_NODOUBLE) { |
| pr_cont("no double precision support\n"); |
| return 0; |
| } |
| |
| VFP_arch = (vfpsid & FPSID_ARCH_MASK) >> FPSID_ARCH_BIT; |
| } |
| |
| cpuhp_setup_state_nocalls(CPUHP_AP_ARM_VFP_STARTING, |
| "arm/vfp:starting", vfp_starting_cpu, |
| vfp_dying_cpu); |
| |
| vfp_vector = vfp_support_entry; |
| |
| thread_register_notifier(&vfp_notifier_block); |
| vfp_pm_init(); |
| |
| /* |
| * We detected VFP, and the support code is |
| * in place; report VFP support to userspace. |
| */ |
| elf_hwcap |= HWCAP_VFP; |
| |
| pr_cont("implementor %02x architecture %d part %02x variant %x rev %x\n", |
| (vfpsid & FPSID_IMPLEMENTER_MASK) >> FPSID_IMPLEMENTER_BIT, |
| VFP_arch, |
| (vfpsid & FPSID_PART_MASK) >> FPSID_PART_BIT, |
| (vfpsid & FPSID_VARIANT_MASK) >> FPSID_VARIANT_BIT, |
| (vfpsid & FPSID_REV_MASK) >> FPSID_REV_BIT); |
| |
| return 0; |
| } |
| |
| core_initcall(vfp_init); |