| /* |
| * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. |
| * Copyright (C) 2009 Marc Kleine-Budde, Pengutronix |
| * |
| * Author: Fabio Estevam <fabio.estevam@freescale.com> |
| * |
| * Copyright (C) 2011 Meprolight, Ltd. |
| * Alex Gershgorin <alexg@meprolight.com> |
| * |
| * Modified from i.MX31 3-Stack Development System |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| /* |
| * This machine is known as: |
| * - i.MX35 3-Stack Development System |
| * - i.MX35 Platform Development Kit (i.MX35 PDK) |
| */ |
| |
| #include <linux/types.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/memory.h> |
| #include <linux/gpio.h> |
| #include <linux/usb/otg.h> |
| |
| #include <linux/mtd/physmap.h> |
| #include <linux/mfd/mc13892.h> |
| #include <linux/regulator/machine.h> |
| |
| #include <asm/mach-types.h> |
| #include <asm/mach/arch.h> |
| #include <asm/mach/time.h> |
| #include <asm/mach/map.h> |
| #include <asm/memblock.h> |
| |
| #include <mach/hardware.h> |
| #include <mach/common.h> |
| #include <mach/iomux-mx35.h> |
| #include <video/platform_lcd.h> |
| |
| #include <media/soc_camera.h> |
| |
| #include "3ds_debugboard.h" |
| #include "devices-imx35.h" |
| |
| #define GPIO_MC9S08DZ60_GPS_ENABLE 0 |
| #define GPIO_MC9S08DZ60_HDD_ENABLE 4 |
| #define GPIO_MC9S08DZ60_WIFI_ENABLE 5 |
| #define GPIO_MC9S08DZ60_LCD_ENABLE 6 |
| #define GPIO_MC9S08DZ60_SPEAKER_ENABLE 8 |
| |
| static const struct fb_videomode fb_modedb[] = { |
| { |
| /* 800x480 @ 55 Hz */ |
| .name = "Ceramate-CLAA070VC01", |
| .refresh = 55, |
| .xres = 800, |
| .yres = 480, |
| .pixclock = 40000, |
| .left_margin = 40, |
| .right_margin = 40, |
| .upper_margin = 5, |
| .lower_margin = 5, |
| .hsync_len = 20, |
| .vsync_len = 10, |
| .sync = FB_SYNC_OE_ACT_HIGH, |
| .vmode = FB_VMODE_NONINTERLACED, |
| .flag = 0, |
| }, |
| }; |
| |
| static struct mx3fb_platform_data mx3fb_pdata __initdata = { |
| .name = "Ceramate-CLAA070VC01", |
| .mode = fb_modedb, |
| .num_modes = ARRAY_SIZE(fb_modedb), |
| }; |
| |
| static struct i2c_board_info __initdata i2c_devices_3ds[] = { |
| { |
| I2C_BOARD_INFO("mc9s08dz60", 0x69), |
| }, |
| }; |
| |
| static int lcd_power_gpio = -ENXIO; |
| |
| static int mc9s08dz60_gpiochip_match(struct gpio_chip *chip, void *data) |
| { |
| return !strcmp(chip->label, data); |
| } |
| |
| static void mx35_3ds_lcd_set_power( |
| struct plat_lcd_data *pd, unsigned int power) |
| { |
| struct gpio_chip *chip; |
| |
| if (!gpio_is_valid(lcd_power_gpio)) { |
| chip = gpiochip_find( |
| "mc9s08dz60", mc9s08dz60_gpiochip_match); |
| if (chip) { |
| lcd_power_gpio = |
| chip->base + GPIO_MC9S08DZ60_LCD_ENABLE; |
| if (gpio_request(lcd_power_gpio, "lcd_power") < 0) { |
| pr_err("error: gpio already requested!\n"); |
| lcd_power_gpio = -ENXIO; |
| } |
| } else { |
| pr_err("error: didn't find mc9s08dz60 gpio chip\n"); |
| } |
| } |
| |
| if (gpio_is_valid(lcd_power_gpio)) |
| gpio_set_value_cansleep(lcd_power_gpio, power); |
| } |
| |
| static struct plat_lcd_data mx35_3ds_lcd_data = { |
| .set_power = mx35_3ds_lcd_set_power, |
| }; |
| |
| static struct platform_device mx35_3ds_lcd = { |
| .name = "platform-lcd", |
| .dev.platform_data = &mx35_3ds_lcd_data, |
| }; |
| |
| static const struct imxuart_platform_data uart_pdata __initconst = { |
| .flags = IMXUART_HAVE_RTSCTS, |
| }; |
| |
| static struct physmap_flash_data mx35pdk_flash_data = { |
| .width = 2, |
| }; |
| |
| static struct resource mx35pdk_flash_resource = { |
| .start = MX35_CS0_BASE_ADDR, |
| .end = MX35_CS0_BASE_ADDR + SZ_64M - 1, |
| .flags = IORESOURCE_MEM, |
| }; |
| |
| static struct platform_device mx35pdk_flash = { |
| .name = "physmap-flash", |
| .id = 0, |
| .dev = { |
| .platform_data = &mx35pdk_flash_data, |
| }, |
| .resource = &mx35pdk_flash_resource, |
| .num_resources = 1, |
| }; |
| |
| static const struct mxc_nand_platform_data mx35pdk_nand_board_info __initconst = { |
| .width = 1, |
| .hw_ecc = 1, |
| .flash_bbt = 1, |
| }; |
| |
| static struct platform_device *devices[] __initdata = { |
| &mx35pdk_flash, |
| }; |
| |
| static iomux_v3_cfg_t mx35pdk_pads[] = { |
| /* UART1 */ |
| MX35_PAD_CTS1__UART1_CTS, |
| MX35_PAD_RTS1__UART1_RTS, |
| MX35_PAD_TXD1__UART1_TXD_MUX, |
| MX35_PAD_RXD1__UART1_RXD_MUX, |
| /* FEC */ |
| MX35_PAD_FEC_TX_CLK__FEC_TX_CLK, |
| MX35_PAD_FEC_RX_CLK__FEC_RX_CLK, |
| MX35_PAD_FEC_RX_DV__FEC_RX_DV, |
| MX35_PAD_FEC_COL__FEC_COL, |
| MX35_PAD_FEC_RDATA0__FEC_RDATA_0, |
| MX35_PAD_FEC_TDATA0__FEC_TDATA_0, |
| MX35_PAD_FEC_TX_EN__FEC_TX_EN, |
| MX35_PAD_FEC_MDC__FEC_MDC, |
| MX35_PAD_FEC_MDIO__FEC_MDIO, |
| MX35_PAD_FEC_TX_ERR__FEC_TX_ERR, |
| MX35_PAD_FEC_RX_ERR__FEC_RX_ERR, |
| MX35_PAD_FEC_CRS__FEC_CRS, |
| MX35_PAD_FEC_RDATA1__FEC_RDATA_1, |
| MX35_PAD_FEC_TDATA1__FEC_TDATA_1, |
| MX35_PAD_FEC_RDATA2__FEC_RDATA_2, |
| MX35_PAD_FEC_TDATA2__FEC_TDATA_2, |
| MX35_PAD_FEC_RDATA3__FEC_RDATA_3, |
| MX35_PAD_FEC_TDATA3__FEC_TDATA_3, |
| /* USBOTG */ |
| MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR, |
| MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC, |
| /* USBH1 */ |
| MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR, |
| MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC, |
| /* SDCARD */ |
| MX35_PAD_SD1_CMD__ESDHC1_CMD, |
| MX35_PAD_SD1_CLK__ESDHC1_CLK, |
| MX35_PAD_SD1_DATA0__ESDHC1_DAT0, |
| MX35_PAD_SD1_DATA1__ESDHC1_DAT1, |
| MX35_PAD_SD1_DATA2__ESDHC1_DAT2, |
| MX35_PAD_SD1_DATA3__ESDHC1_DAT3, |
| /* I2C1 */ |
| MX35_PAD_I2C1_CLK__I2C1_SCL, |
| MX35_PAD_I2C1_DAT__I2C1_SDA, |
| /* Display */ |
| MX35_PAD_LD0__IPU_DISPB_DAT_0, |
| MX35_PAD_LD1__IPU_DISPB_DAT_1, |
| MX35_PAD_LD2__IPU_DISPB_DAT_2, |
| MX35_PAD_LD3__IPU_DISPB_DAT_3, |
| MX35_PAD_LD4__IPU_DISPB_DAT_4, |
| MX35_PAD_LD5__IPU_DISPB_DAT_5, |
| MX35_PAD_LD6__IPU_DISPB_DAT_6, |
| MX35_PAD_LD7__IPU_DISPB_DAT_7, |
| MX35_PAD_LD8__IPU_DISPB_DAT_8, |
| MX35_PAD_LD9__IPU_DISPB_DAT_9, |
| MX35_PAD_LD10__IPU_DISPB_DAT_10, |
| MX35_PAD_LD11__IPU_DISPB_DAT_11, |
| MX35_PAD_LD12__IPU_DISPB_DAT_12, |
| MX35_PAD_LD13__IPU_DISPB_DAT_13, |
| MX35_PAD_LD14__IPU_DISPB_DAT_14, |
| MX35_PAD_LD15__IPU_DISPB_DAT_15, |
| MX35_PAD_LD16__IPU_DISPB_DAT_16, |
| MX35_PAD_LD17__IPU_DISPB_DAT_17, |
| MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC, |
| MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK, |
| MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY, |
| MX35_PAD_CONTRAST__IPU_DISPB_CONTR, |
| MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC, |
| MX35_PAD_D3_REV__IPU_DISPB_D3_REV, |
| MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS, |
| /* CSI */ |
| MX35_PAD_TX1__IPU_CSI_D_6, |
| MX35_PAD_TX0__IPU_CSI_D_7, |
| MX35_PAD_CSI_D8__IPU_CSI_D_8, |
| MX35_PAD_CSI_D9__IPU_CSI_D_9, |
| MX35_PAD_CSI_D10__IPU_CSI_D_10, |
| MX35_PAD_CSI_D11__IPU_CSI_D_11, |
| MX35_PAD_CSI_D12__IPU_CSI_D_12, |
| MX35_PAD_CSI_D13__IPU_CSI_D_13, |
| MX35_PAD_CSI_D14__IPU_CSI_D_14, |
| MX35_PAD_CSI_D15__IPU_CSI_D_15, |
| MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC, |
| MX35_PAD_CSI_MCLK__IPU_CSI_MCLK, |
| MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK, |
| MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC, |
| /*PMIC IRQ*/ |
| MX35_PAD_GPIO2_0__GPIO2_0, |
| }; |
| |
| /* |
| * Camera support |
| */ |
| static phys_addr_t mx3_camera_base __initdata; |
| #define MX35_3DS_CAMERA_BUF_SIZE SZ_8M |
| |
| static const struct mx3_camera_pdata mx35_3ds_camera_pdata __initconst = { |
| .flags = MX3_CAMERA_DATAWIDTH_8, |
| .mclk_10khz = 2000, |
| }; |
| |
| static int __init imx35_3ds_init_camera(void) |
| { |
| int dma, ret = -ENOMEM; |
| struct platform_device *pdev = |
| imx35_alloc_mx3_camera(&mx35_3ds_camera_pdata); |
| |
| if (IS_ERR(pdev)) |
| return PTR_ERR(pdev); |
| |
| if (!mx3_camera_base) |
| goto err; |
| |
| dma = dma_declare_coherent_memory(&pdev->dev, |
| mx3_camera_base, mx3_camera_base, |
| MX35_3DS_CAMERA_BUF_SIZE, |
| DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE); |
| |
| if (!(dma & DMA_MEMORY_MAP)) |
| goto err; |
| |
| ret = platform_device_add(pdev); |
| if (ret) |
| err: |
| platform_device_put(pdev); |
| |
| return ret; |
| } |
| |
| static struct i2c_board_info mx35_3ds_i2c_camera = { |
| I2C_BOARD_INFO("ov2640", 0x30), |
| }; |
| |
| static struct soc_camera_link iclink_ov2640 = { |
| .bus_id = 0, |
| .board_info = &mx35_3ds_i2c_camera, |
| .i2c_adapter_id = 0, |
| .power = NULL, |
| }; |
| |
| static struct platform_device mx35_3ds_ov2640 = { |
| .name = "soc-camera-pdrv", |
| .id = 0, |
| .dev = { |
| .platform_data = &iclink_ov2640, |
| }, |
| }; |
| |
| static struct regulator_consumer_supply sw1_consumers[] = { |
| { |
| .supply = "cpu_vcc", |
| } |
| }; |
| |
| static struct regulator_consumer_supply vcam_consumers[] = { |
| /* sgtl5000 */ |
| REGULATOR_SUPPLY("VDDA", "0-000a"), |
| }; |
| |
| static struct regulator_consumer_supply vaudio_consumers[] = { |
| REGULATOR_SUPPLY("cmos_vio", "soc-camera-pdrv.0"), |
| }; |
| |
| static struct regulator_init_data sw1_init = { |
| .constraints = { |
| .name = "SW1", |
| .min_uV = 600000, |
| .max_uV = 1375000, |
| .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, |
| .valid_modes_mask = 0, |
| .always_on = 1, |
| .boot_on = 1, |
| }, |
| .num_consumer_supplies = ARRAY_SIZE(sw1_consumers), |
| .consumer_supplies = sw1_consumers, |
| }; |
| |
| static struct regulator_init_data sw2_init = { |
| .constraints = { |
| .name = "SW2", |
| .always_on = 1, |
| .boot_on = 1, |
| } |
| }; |
| |
| static struct regulator_init_data sw3_init = { |
| .constraints = { |
| .name = "SW3", |
| .always_on = 1, |
| .boot_on = 1, |
| } |
| }; |
| |
| static struct regulator_init_data sw4_init = { |
| .constraints = { |
| .name = "SW4", |
| .always_on = 1, |
| .boot_on = 1, |
| } |
| }; |
| |
| static struct regulator_init_data viohi_init = { |
| .constraints = { |
| .name = "VIOHI", |
| .boot_on = 1, |
| } |
| }; |
| |
| static struct regulator_init_data vusb_init = { |
| .constraints = { |
| .name = "VUSB", |
| .boot_on = 1, |
| } |
| }; |
| |
| static struct regulator_init_data vdig_init = { |
| .constraints = { |
| .name = "VDIG", |
| .boot_on = 1, |
| } |
| }; |
| |
| static struct regulator_init_data vpll_init = { |
| .constraints = { |
| .name = "VPLL", |
| .boot_on = 1, |
| } |
| }; |
| |
| static struct regulator_init_data vusb2_init = { |
| .constraints = { |
| .name = "VUSB2", |
| .boot_on = 1, |
| } |
| }; |
| |
| static struct regulator_init_data vvideo_init = { |
| .constraints = { |
| .name = "VVIDEO", |
| .boot_on = 1 |
| } |
| }; |
| |
| static struct regulator_init_data vaudio_init = { |
| .constraints = { |
| .name = "VAUDIO", |
| .min_uV = 2300000, |
| .max_uV = 3000000, |
| .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, |
| .boot_on = 1 |
| }, |
| .num_consumer_supplies = ARRAY_SIZE(vaudio_consumers), |
| .consumer_supplies = vaudio_consumers, |
| }; |
| |
| static struct regulator_init_data vcam_init = { |
| .constraints = { |
| .name = "VCAM", |
| .min_uV = 2500000, |
| .max_uV = 3000000, |
| .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | |
| REGULATOR_CHANGE_MODE, |
| .valid_modes_mask = REGULATOR_MODE_FAST | REGULATOR_MODE_NORMAL, |
| .boot_on = 1 |
| }, |
| .num_consumer_supplies = ARRAY_SIZE(vcam_consumers), |
| .consumer_supplies = vcam_consumers, |
| }; |
| |
| static struct regulator_init_data vgen1_init = { |
| .constraints = { |
| .name = "VGEN1", |
| } |
| }; |
| |
| static struct regulator_init_data vgen2_init = { |
| .constraints = { |
| .name = "VGEN2", |
| .boot_on = 1, |
| } |
| }; |
| |
| static struct regulator_init_data vgen3_init = { |
| .constraints = { |
| .name = "VGEN3", |
| } |
| }; |
| |
| static struct mc13xxx_regulator_init_data mx35_3ds_regulators[] = { |
| { .id = MC13892_SW1, .init_data = &sw1_init }, |
| { .id = MC13892_SW2, .init_data = &sw2_init }, |
| { .id = MC13892_SW3, .init_data = &sw3_init }, |
| { .id = MC13892_SW4, .init_data = &sw4_init }, |
| { .id = MC13892_VIOHI, .init_data = &viohi_init }, |
| { .id = MC13892_VPLL, .init_data = &vpll_init }, |
| { .id = MC13892_VDIG, .init_data = &vdig_init }, |
| { .id = MC13892_VUSB2, .init_data = &vusb2_init }, |
| { .id = MC13892_VVIDEO, .init_data = &vvideo_init }, |
| { .id = MC13892_VAUDIO, .init_data = &vaudio_init }, |
| { .id = MC13892_VCAM, .init_data = &vcam_init }, |
| { .id = MC13892_VGEN1, .init_data = &vgen1_init }, |
| { .id = MC13892_VGEN2, .init_data = &vgen2_init }, |
| { .id = MC13892_VGEN3, .init_data = &vgen3_init }, |
| { .id = MC13892_VUSB, .init_data = &vusb_init }, |
| }; |
| |
| static struct mc13xxx_platform_data mx35_3ds_mc13892_data = { |
| .flags = MC13XXX_USE_RTC | MC13XXX_USE_TOUCHSCREEN, |
| .regulators = { |
| .num_regulators = ARRAY_SIZE(mx35_3ds_regulators), |
| .regulators = mx35_3ds_regulators, |
| }, |
| }; |
| |
| #define GPIO_PMIC_INT IMX_GPIO_NR(2, 0) |
| |
| static struct i2c_board_info mx35_3ds_i2c_mc13892 = { |
| |
| I2C_BOARD_INFO("mc13892", 0x08), |
| .platform_data = &mx35_3ds_mc13892_data, |
| /* irq number is run-time assigned */ |
| }; |
| |
| static void __init imx35_3ds_init_mc13892(void) |
| { |
| int ret = gpio_request_one(GPIO_PMIC_INT, GPIOF_DIR_IN, "pmic irq"); |
| |
| if (ret) { |
| pr_err("failed to get pmic irq: %d\n", ret); |
| return; |
| } |
| |
| mx35_3ds_i2c_mc13892.irq = gpio_to_irq(GPIO_PMIC_INT); |
| i2c_register_board_info(0, &mx35_3ds_i2c_mc13892, 1); |
| } |
| |
| static int mx35_3ds_otg_init(struct platform_device *pdev) |
| { |
| return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY); |
| } |
| |
| /* OTG config */ |
| static const struct fsl_usb2_platform_data usb_otg_pdata __initconst = { |
| .operating_mode = FSL_USB2_DR_DEVICE, |
| .phy_mode = FSL_USB2_PHY_UTMI_WIDE, |
| .workaround = FLS_USB2_WORKAROUND_ENGCM09152, |
| /* |
| * ENGCM09152 also requires a hardware change. |
| * Please check the MX35 Chip Errata document for details. |
| */ |
| }; |
| |
| static struct mxc_usbh_platform_data otg_pdata __initdata = { |
| .init = mx35_3ds_otg_init, |
| .portsc = MXC_EHCI_MODE_UTMI, |
| }; |
| |
| static int mx35_3ds_usbh_init(struct platform_device *pdev) |
| { |
| return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI | |
| MXC_EHCI_INTERNAL_PHY); |
| } |
| |
| /* USB HOST config */ |
| static const struct mxc_usbh_platform_data usb_host_pdata __initconst = { |
| .init = mx35_3ds_usbh_init, |
| .portsc = MXC_EHCI_MODE_SERIAL, |
| }; |
| |
| static bool otg_mode_host __initdata; |
| |
| static int __init mx35_3ds_otg_mode(char *options) |
| { |
| if (!strcmp(options, "host")) |
| otg_mode_host = true; |
| else if (!strcmp(options, "device")) |
| otg_mode_host = false; |
| else |
| pr_info("otg_mode neither \"host\" nor \"device\". " |
| "Defaulting to device\n"); |
| return 1; |
| } |
| __setup("otg_mode=", mx35_3ds_otg_mode); |
| |
| static const struct imxi2c_platform_data mx35_3ds_i2c0_data __initconst = { |
| .bitrate = 100000, |
| }; |
| |
| /* |
| * Board specific initialization. |
| */ |
| static void __init mx35_3ds_init(void) |
| { |
| struct platform_device *imx35_fb_pdev; |
| |
| imx35_soc_init(); |
| |
| mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads)); |
| |
| imx35_add_fec(NULL); |
| imx35_add_imx2_wdt(); |
| imx35_add_mxc_rtc(); |
| platform_add_devices(devices, ARRAY_SIZE(devices)); |
| |
| imx35_add_imx_uart0(&uart_pdata); |
| |
| if (otg_mode_host) |
| imx35_add_mxc_ehci_otg(&otg_pdata); |
| |
| imx35_add_mxc_ehci_hs(&usb_host_pdata); |
| |
| if (!otg_mode_host) |
| imx35_add_fsl_usb2_udc(&usb_otg_pdata); |
| |
| imx35_add_mxc_nand(&mx35pdk_nand_board_info); |
| imx35_add_sdhci_esdhc_imx(0, NULL); |
| |
| if (mxc_expio_init(MX35_CS5_BASE_ADDR, IMX_GPIO_NR(1, 1))) |
| pr_warn("Init of the debugboard failed, all " |
| "devices on the debugboard are unusable.\n"); |
| imx35_add_imx_i2c0(&mx35_3ds_i2c0_data); |
| |
| i2c_register_board_info( |
| 0, i2c_devices_3ds, ARRAY_SIZE(i2c_devices_3ds)); |
| |
| imx35_add_ipu_core(); |
| platform_device_register(&mx35_3ds_ov2640); |
| imx35_3ds_init_camera(); |
| |
| imx35_fb_pdev = imx35_add_mx3_sdc_fb(&mx3fb_pdata); |
| mx35_3ds_lcd.dev.parent = &imx35_fb_pdev->dev; |
| platform_device_register(&mx35_3ds_lcd); |
| |
| imx35_3ds_init_mc13892(); |
| } |
| |
| static void __init mx35pdk_timer_init(void) |
| { |
| mx35_clocks_init(); |
| } |
| |
| static struct sys_timer mx35pdk_timer = { |
| .init = mx35pdk_timer_init, |
| }; |
| |
| static void __init mx35_3ds_reserve(void) |
| { |
| /* reserve MX35_3DS_CAMERA_BUF_SIZE bytes for mx3-camera */ |
| mx3_camera_base = arm_memblock_steal(MX35_3DS_CAMERA_BUF_SIZE, |
| MX35_3DS_CAMERA_BUF_SIZE); |
| } |
| |
| MACHINE_START(MX35_3DS, "Freescale MX35PDK") |
| /* Maintainer: Freescale Semiconductor, Inc */ |
| .atag_offset = 0x100, |
| .map_io = mx35_map_io, |
| .init_early = imx35_init_early, |
| .init_irq = mx35_init_irq, |
| .handle_irq = imx35_handle_irq, |
| .timer = &mx35pdk_timer, |
| .init_machine = mx35_3ds_init, |
| .reserve = mx35_3ds_reserve, |
| .restart = mxc_restart, |
| MACHINE_END |