| /* |
| * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/clock/qcom,gcc-msm8916.h> |
| #include <dt-bindings/reset/qcom,gcc-msm8916.h> |
| #include <dt-bindings/clock/qcom,rpmcc.h> |
| |
| / { |
| model = "Qualcomm Technologies, Inc. MSM8916"; |
| compatible = "qcom,msm8916"; |
| |
| interrupt-parent = <&intc>; |
| |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| aliases { |
| sdhc1 = &sdhc_1; /* SDC1 eMMC slot */ |
| sdhc2 = &sdhc_2; /* SDC2 SD card slot */ |
| }; |
| |
| chosen { }; |
| |
| memory { |
| device_type = "memory"; |
| /* We expect the bootloader to fill in the reg */ |
| reg = <0 0 0 0>; |
| }; |
| |
| reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| tz-apps@86000000 { |
| reg = <0x0 0x86000000 0x0 0x300000>; |
| no-map; |
| }; |
| |
| smem_mem: smem_region@86300000 { |
| reg = <0x0 0x86300000 0x0 0x100000>; |
| no-map; |
| }; |
| |
| hypervisor@86400000 { |
| reg = <0x0 0x86400000 0x0 0x100000>; |
| no-map; |
| }; |
| |
| tz@86500000 { |
| reg = <0x0 0x86500000 0x0 0x180000>; |
| no-map; |
| }; |
| |
| reserved@8668000 { |
| reg = <0x0 0x86680000 0x0 0x80000>; |
| no-map; |
| }; |
| |
| rmtfs@86700000 { |
| reg = <0x0 0x86700000 0x0 0xe0000>; |
| no-map; |
| }; |
| |
| rfsa@867e00000 { |
| reg = <0x0 0x867e0000 0x0 0x20000>; |
| no-map; |
| }; |
| |
| mpss_mem: mpss@86800000 { |
| reg = <0x0 0x86800000 0x0 0x2b00000>; |
| no-map; |
| }; |
| |
| wcnss_mem: wcnss@89300000 { |
| reg = <0x0 0x89300000 0x0 0x600000>; |
| no-map; |
| }; |
| |
| mba_mem: mba@8ea00000 { |
| no-map; |
| reg = <0 0x8ea00000 0 0x100000>; |
| }; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| CPU0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53", "arm,armv8"; |
| reg = <0x0>; |
| next-level-cache = <&L2_0>; |
| enable-method = "psci"; |
| cpu-idle-states = <&CPU_SPC>; |
| }; |
| |
| CPU1: cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53", "arm,armv8"; |
| reg = <0x1>; |
| next-level-cache = <&L2_0>; |
| enable-method = "psci"; |
| cpu-idle-states = <&CPU_SPC>; |
| }; |
| |
| CPU2: cpu@2 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53", "arm,armv8"; |
| reg = <0x2>; |
| next-level-cache = <&L2_0>; |
| enable-method = "psci"; |
| cpu-idle-states = <&CPU_SPC>; |
| }; |
| |
| CPU3: cpu@3 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53", "arm,armv8"; |
| reg = <0x3>; |
| next-level-cache = <&L2_0>; |
| enable-method = "psci"; |
| cpu-idle-states = <&CPU_SPC>; |
| }; |
| |
| L2_0: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| }; |
| |
| idle-states { |
| CPU_SPC: spc { |
| compatible = "arm,idle-state"; |
| arm,psci-suspend-param = <0x40000002>; |
| entry-latency-us = <130>; |
| exit-latency-us = <150>; |
| min-residency-us = <2000>; |
| local-timer-stop; |
| }; |
| }; |
| }; |
| |
| psci { |
| compatible = "arm,psci-1.0"; |
| method = "smc"; |
| }; |
| |
| pmu { |
| compatible = "arm,cortex-a53-pmu"; |
| interrupts = <GIC_PPI 7 GIC_CPU_MASK_SIMPLE(4)>; |
| }; |
| |
| thermal-zones { |
| cpu-thermal0 { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens 4>; |
| |
| trips { |
| cpu_alert0: trip0 { |
| temperature = <75000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| cpu_crit0: trip1 { |
| temperature = <110000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu-thermal1 { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens 3>; |
| |
| trips { |
| cpu_alert1: trip0 { |
| temperature = <75000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| cpu_crit1: trip1 { |
| temperature = <110000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; |
| }; |
| |
| clocks { |
| xo_board: xo_board { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <19200000>; |
| }; |
| |
| sleep_clk: sleep_clk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <32768>; |
| }; |
| }; |
| |
| smem { |
| compatible = "qcom,smem"; |
| |
| memory-region = <&smem_mem>; |
| qcom,rpm-msg-ram = <&rpm_msg_ram>; |
| |
| hwlocks = <&tcsr_mutex 3>; |
| }; |
| |
| firmware { |
| scm: scm { |
| compatible = "qcom,scm"; |
| clocks = <&gcc GCC_CRYPTO_CLK>, <&gcc GCC_CRYPTO_AXI_CLK>, <&gcc GCC_CRYPTO_AHB_CLK>; |
| clock-names = "core", "bus", "iface"; |
| #reset-cells = <1>; |
| }; |
| }; |
| |
| soc: soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0 0 0xffffffff>; |
| compatible = "simple-bus"; |
| |
| restart@4ab000 { |
| compatible = "qcom,pshold"; |
| reg = <0x4ab000 0x4>; |
| }; |
| |
| msmgpio: pinctrl@1000000 { |
| compatible = "qcom,msm8916-pinctrl"; |
| reg = <0x1000000 0x300000>; |
| interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gcc: clock-controller@1800000 { |
| compatible = "qcom,gcc-msm8916"; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| #power-domain-cells = <1>; |
| reg = <0x1800000 0x80000>; |
| }; |
| |
| tcsr_mutex_regs: syscon@1905000 { |
| compatible = "syscon"; |
| reg = <0x1905000 0x20000>; |
| }; |
| |
| tcsr: syscon@1937000 { |
| compatible = "qcom,tcsr-msm8916", "syscon"; |
| reg = <0x1937000 0x30000>; |
| }; |
| |
| tcsr_mutex: hwlock { |
| compatible = "qcom,tcsr-mutex"; |
| syscon = <&tcsr_mutex_regs 0 0x1000>; |
| #hwlock-cells = <1>; |
| }; |
| |
| rpm_msg_ram: memory@60000 { |
| compatible = "qcom,rpm-msg-ram"; |
| reg = <0x60000 0x8000>; |
| }; |
| |
| blsp1_uart1: serial@78af000 { |
| compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; |
| reg = <0x78af000 0x200>; |
| interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| dmas = <&blsp_dma 1>, <&blsp_dma 0>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| apcs: syscon@b011000 { |
| compatible = "syscon"; |
| reg = <0x0b011000 0x1000>; |
| }; |
| |
| blsp1_uart2: serial@78b0000 { |
| compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; |
| reg = <0x78b0000 0x200>; |
| interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| dmas = <&blsp_dma 3>, <&blsp_dma 2>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| blsp_dma: dma@7884000 { |
| compatible = "qcom,bam-v1.7.0"; |
| reg = <0x07884000 0x23000>; |
| interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "bam_clk"; |
| #dma-cells = <1>; |
| qcom,ee = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp_spi1: spi@78b5000 { |
| compatible = "qcom,spi-qup-v2.2.1"; |
| reg = <0x078b5000 0x600>; |
| interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| dmas = <&blsp_dma 5>, <&blsp_dma 4>; |
| dma-names = "rx", "tx"; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&spi1_default>; |
| pinctrl-1 = <&spi1_sleep>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp_spi2: spi@78b6000 { |
| compatible = "qcom,spi-qup-v2.2.1"; |
| reg = <0x078b6000 0x600>; |
| interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| dmas = <&blsp_dma 7>, <&blsp_dma 6>; |
| dma-names = "rx", "tx"; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&spi2_default>; |
| pinctrl-1 = <&spi2_sleep>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp_spi3: spi@78b7000 { |
| compatible = "qcom,spi-qup-v2.2.1"; |
| reg = <0x078b7000 0x600>; |
| interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| dmas = <&blsp_dma 9>, <&blsp_dma 8>; |
| dma-names = "rx", "tx"; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&spi3_default>; |
| pinctrl-1 = <&spi3_sleep>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp_spi4: spi@78b8000 { |
| compatible = "qcom,spi-qup-v2.2.1"; |
| reg = <0x078b8000 0x600>; |
| interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| dmas = <&blsp_dma 11>, <&blsp_dma 10>; |
| dma-names = "rx", "tx"; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&spi4_default>; |
| pinctrl-1 = <&spi4_sleep>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp_spi5: spi@78b9000 { |
| compatible = "qcom,spi-qup-v2.2.1"; |
| reg = <0x078b9000 0x600>; |
| interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| dmas = <&blsp_dma 13>, <&blsp_dma 12>; |
| dma-names = "rx", "tx"; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&spi5_default>; |
| pinctrl-1 = <&spi5_sleep>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp_spi6: spi@78ba000 { |
| compatible = "qcom,spi-qup-v2.2.1"; |
| reg = <0x078ba000 0x600>; |
| interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| dmas = <&blsp_dma 15>, <&blsp_dma 14>; |
| dma-names = "rx", "tx"; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&spi6_default>; |
| pinctrl-1 = <&spi6_sleep>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp_i2c2: i2c@78b6000 { |
| compatible = "qcom,i2c-qup-v2.2.1"; |
| reg = <0x78b6000 0x1000>; |
| interrupts = <GIC_SPI 96 0>; |
| clocks = <&gcc GCC_BLSP1_AHB_CLK>, |
| <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; |
| clock-names = "iface", "core"; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&i2c2_default>; |
| pinctrl-1 = <&i2c2_sleep>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp_i2c4: i2c@78b8000 { |
| compatible = "qcom,i2c-qup-v2.2.1"; |
| reg = <0x78b8000 0x1000>; |
| interrupts = <GIC_SPI 98 0>; |
| clocks = <&gcc GCC_BLSP1_AHB_CLK>, |
| <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>; |
| clock-names = "iface", "core"; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&i2c4_default>; |
| pinctrl-1 = <&i2c4_sleep>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp_i2c6: i2c@78ba000 { |
| compatible = "qcom,i2c-qup-v2.2.1"; |
| reg = <0x78ba000 0x1000>; |
| interrupts = <GIC_SPI 100 0>; |
| clocks = <&gcc GCC_BLSP1_AHB_CLK>, |
| <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; |
| clock-names = "iface", "core"; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&i2c6_default>; |
| pinctrl-1 = <&i2c6_sleep>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| lpass: lpass@07708000 { |
| status = "disabled"; |
| compatible = "qcom,lpass-cpu-apq8016"; |
| clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, |
| <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>, |
| <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>, |
| <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>, |
| <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>, |
| <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>, |
| <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>; |
| |
| clock-names = "ahbix-clk", |
| "pcnoc-mport-clk", |
| "pcnoc-sway-clk", |
| "mi2s-bit-clk0", |
| "mi2s-bit-clk1", |
| "mi2s-bit-clk2", |
| "mi2s-bit-clk3"; |
| #sound-dai-cells = <1>; |
| |
| interrupts = <0 160 0>; |
| interrupt-names = "lpass-irq-lpaif"; |
| reg = <0x07708000 0x10000>; |
| reg-names = "lpass-lpaif"; |
| }; |
| |
| lpass_codec: codec{ |
| compatible = "qcom,msm8916-wcd-digital-codec"; |
| reg = <0x0771c000 0x400>; |
| clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, |
| <&gcc GCC_CODEC_DIGCODEC_CLK>; |
| clock-names = "ahbix-clk", "mclk"; |
| #sound-dai-cells = <1>; |
| }; |
| |
| sdhc_1: sdhci@07824000 { |
| compatible = "qcom,sdhci-msm-v4"; |
| reg = <0x07824900 0x11c>, <0x07824000 0x800>; |
| reg-names = "hc_mem", "core_mem"; |
| |
| interrupts = <0 123 0>, <0 138 0>; |
| interrupt-names = "hc_irq", "pwr_irq"; |
| clocks = <&gcc GCC_SDCC1_APPS_CLK>, |
| <&gcc GCC_SDCC1_AHB_CLK>, |
| <&xo_board>; |
| clock-names = "core", "iface", "xo"; |
| mmc-ddr-1_8v; |
| bus-width = <8>; |
| non-removable; |
| status = "disabled"; |
| }; |
| |
| sdhc_2: sdhci@07864000 { |
| compatible = "qcom,sdhci-msm-v4"; |
| reg = <0x07864900 0x11c>, <0x07864000 0x800>; |
| reg-names = "hc_mem", "core_mem"; |
| |
| interrupts = <0 125 0>, <0 221 0>; |
| interrupt-names = "hc_irq", "pwr_irq"; |
| clocks = <&gcc GCC_SDCC2_APPS_CLK>, |
| <&gcc GCC_SDCC2_AHB_CLK>, |
| <&xo_board>; |
| clock-names = "core", "iface", "xo"; |
| bus-width = <4>; |
| status = "disabled"; |
| }; |
| |
| otg: usb@78d9000 { |
| compatible = "qcom,ci-hdrc"; |
| reg = <0x78d9000 0x200>, |
| <0x78d9200 0x200>; |
| interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_USB_HS_AHB_CLK>, |
| <&gcc GCC_USB_HS_SYSTEM_CLK>; |
| clock-names = "iface", "core"; |
| assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>; |
| assigned-clock-rates = <80000000>; |
| resets = <&gcc GCC_USB_HS_BCR>; |
| reset-names = "core"; |
| phy_type = "ulpi"; |
| dr_mode = "otg"; |
| ahb-burst-config = <0>; |
| phy-names = "usb-phy"; |
| phys = <&usb_hs_phy>; |
| status = "disabled"; |
| #reset-cells = <1>; |
| |
| ulpi { |
| usb_hs_phy: phy { |
| compatible = "qcom,usb-hs-phy-msm8916", |
| "qcom,usb-hs-phy"; |
| #phy-cells = <0>; |
| clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>; |
| clock-names = "ref", "sleep"; |
| resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>; |
| reset-names = "phy", "por"; |
| qcom,init-seq = /bits/ 8 <0x0 0x44 |
| 0x1 0x6b 0x2 0x24 0x3 0x13>; |
| }; |
| }; |
| }; |
| |
| intc: interrupt-controller@b000000 { |
| compatible = "qcom,msm-qgic2"; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>; |
| }; |
| |
| timer@b020000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| compatible = "arm,armv7-timer-mem"; |
| reg = <0xb020000 0x1000>; |
| clock-frequency = <19200000>; |
| |
| frame@b021000 { |
| frame-number = <0>; |
| interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0xb021000 0x1000>, |
| <0xb022000 0x1000>; |
| }; |
| |
| frame@b023000 { |
| frame-number = <1>; |
| interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0xb023000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@b024000 { |
| frame-number = <2>; |
| interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0xb024000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@b025000 { |
| frame-number = <3>; |
| interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0xb025000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@b026000 { |
| frame-number = <4>; |
| interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0xb026000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@b027000 { |
| frame-number = <5>; |
| interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0xb027000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@b028000 { |
| frame-number = <6>; |
| interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0xb028000 0x1000>; |
| status = "disabled"; |
| }; |
| }; |
| |
| spmi_bus: spmi@200f000 { |
| compatible = "qcom,spmi-pmic-arb"; |
| reg = <0x200f000 0x001000>, |
| <0x2400000 0x400000>, |
| <0x2c00000 0x400000>, |
| <0x3800000 0x200000>, |
| <0x200a000 0x002100>; |
| reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; |
| interrupt-names = "periph_irq"; |
| interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; |
| qcom,ee = <0>; |
| qcom,channel = <0>; |
| #address-cells = <2>; |
| #size-cells = <0>; |
| interrupt-controller; |
| #interrupt-cells = <4>; |
| }; |
| |
| rng@22000 { |
| compatible = "qcom,prng"; |
| reg = <0x00022000 0x200>; |
| clocks = <&gcc GCC_PRNG_AHB_CLK>; |
| clock-names = "core"; |
| }; |
| |
| qfprom: qfprom@5c000 { |
| compatible = "qcom,qfprom"; |
| reg = <0x5c000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| tsens_caldata: caldata@d0 { |
| reg = <0xd0 0x8>; |
| }; |
| tsens_calsel: calsel@ec { |
| reg = <0xec 0x4>; |
| }; |
| }; |
| |
| tsens: thermal-sensor@4a8000 { |
| compatible = "qcom,msm8916-tsens"; |
| reg = <0x4a8000 0x2000>; |
| nvmem-cells = <&tsens_caldata>, <&tsens_calsel>; |
| nvmem-cell-names = "calib", "calib_sel"; |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| mdss: mdss@1a00000 { |
| compatible = "qcom,mdss"; |
| reg = <0x1a00000 0x1000>, |
| <0x1ac8000 0x3000>; |
| reg-names = "mdss_phys", "vbif_phys"; |
| |
| power-domains = <&gcc MDSS_GDSC>; |
| |
| clocks = <&gcc GCC_MDSS_AHB_CLK>, |
| <&gcc GCC_MDSS_AXI_CLK>, |
| <&gcc GCC_MDSS_VSYNC_CLK>; |
| clock-names = "iface_clk", |
| "bus_clk", |
| "vsync_clk"; |
| |
| interrupts = <0 72 0>; |
| |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| mdp: mdp@1a01000 { |
| compatible = "qcom,mdp5"; |
| reg = <0x1a01000 0x90000>; |
| reg-names = "mdp_phys"; |
| |
| interrupt-parent = <&mdss>; |
| interrupts = <0 0>; |
| |
| clocks = <&gcc GCC_MDSS_AHB_CLK>, |
| <&gcc GCC_MDSS_AXI_CLK>, |
| <&gcc GCC_MDSS_MDP_CLK>, |
| <&gcc GCC_MDSS_VSYNC_CLK>; |
| clock-names = "iface_clk", |
| "bus_clk", |
| "core_clk", |
| "vsync_clk"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| mdp5_intf1_out: endpoint { |
| remote-endpoint = <&dsi0_in>; |
| }; |
| }; |
| }; |
| }; |
| |
| dsi0: dsi@1a98000 { |
| compatible = "qcom,mdss-dsi-ctrl"; |
| reg = <0x1a98000 0x25c>; |
| reg-names = "dsi_ctrl"; |
| |
| interrupt-parent = <&mdss>; |
| interrupts = <4 0>; |
| |
| assigned-clocks = <&gcc BYTE0_CLK_SRC>, |
| <&gcc PCLK0_CLK_SRC>; |
| assigned-clock-parents = <&dsi_phy0 0>, |
| <&dsi_phy0 1>; |
| |
| clocks = <&gcc GCC_MDSS_MDP_CLK>, |
| <&gcc GCC_MDSS_AHB_CLK>, |
| <&gcc GCC_MDSS_AXI_CLK>, |
| <&gcc GCC_MDSS_BYTE0_CLK>, |
| <&gcc GCC_MDSS_PCLK0_CLK>, |
| <&gcc GCC_MDSS_ESC0_CLK>; |
| clock-names = "mdp_core_clk", |
| "iface_clk", |
| "bus_clk", |
| "byte_clk", |
| "pixel_clk", |
| "core_clk"; |
| phys = <&dsi_phy0>; |
| phy-names = "dsi-phy"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| dsi0_in: endpoint { |
| remote-endpoint = <&mdp5_intf1_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| dsi0_out: endpoint { |
| }; |
| }; |
| }; |
| }; |
| |
| dsi_phy0: dsi-phy@1a98300 { |
| compatible = "qcom,dsi-phy-28nm-lp"; |
| reg = <0x1a98300 0xd4>, |
| <0x1a98500 0x280>, |
| <0x1a98780 0x30>; |
| reg-names = "dsi_pll", |
| "dsi_phy", |
| "dsi_phy_regulator"; |
| |
| #clock-cells = <1>; |
| |
| clocks = <&gcc GCC_MDSS_AHB_CLK>; |
| clock-names = "iface_clk"; |
| }; |
| }; |
| |
| |
| hexagon@4080000 { |
| compatible = "qcom,q6v5-pil"; |
| reg = <0x04080000 0x100>, |
| <0x04020000 0x040>; |
| |
| reg-names = "qdsp6", "rmb"; |
| |
| interrupts-extended = <&intc 0 24 1>, |
| <&hexagon_smp2p_in 0 0>, |
| <&hexagon_smp2p_in 1 0>, |
| <&hexagon_smp2p_in 2 0>, |
| <&hexagon_smp2p_in 3 0>; |
| interrupt-names = "wdog", "fatal", "ready", |
| "handover", "stop-ack"; |
| |
| clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, |
| <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, |
| <&gcc GCC_BOOT_ROM_AHB_CLK>, |
| <&xo_board>; |
| clock-names = "iface", "bus", "mem", "xo"; |
| |
| qcom,smem-states = <&hexagon_smp2p_out 0>; |
| qcom,smem-state-names = "stop"; |
| |
| resets = <&scm 0>; |
| reset-names = "mss_restart"; |
| |
| cx-supply = <&pm8916_s1>; |
| mx-supply = <&pm8916_l3>; |
| pll-supply = <&pm8916_l7>; |
| |
| qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>; |
| |
| status = "disabled"; |
| |
| mba { |
| memory-region = <&mba_mem>; |
| }; |
| |
| mpss { |
| memory-region = <&mpss_mem>; |
| }; |
| |
| smd-edge { |
| interrupts = <0 25 IRQ_TYPE_EDGE_RISING>; |
| |
| qcom,smd-edge = <0>; |
| qcom,ipc = <&apcs 8 12>; |
| qcom,remote-pid = <1>; |
| |
| label = "hexagon"; |
| }; |
| }; |
| |
| pronto: wcnss@a21b000 { |
| compatible = "qcom,pronto-v2-pil", "qcom,pronto"; |
| reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>; |
| reg-names = "ccu", "dxe", "pmu"; |
| |
| memory-region = <&wcnss_mem>; |
| |
| interrupts-extended = <&intc 0 149 IRQ_TYPE_EDGE_RISING>, |
| <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, |
| <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, |
| <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, |
| <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; |
| |
| vddmx-supply = <&pm8916_l3>; |
| vddpx-supply = <&pm8916_l7>; |
| |
| qcom,state = <&wcnss_smp2p_out 0>; |
| qcom,state-names = "stop"; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&wcnss_pin_a>; |
| |
| status = "disabled"; |
| |
| iris { |
| compatible = "qcom,wcn3620"; |
| |
| clocks = <&rpmcc RPM_SMD_RF_CLK2>; |
| clock-names = "xo"; |
| |
| vddxo-supply = <&pm8916_l7>; |
| vddrfa-supply = <&pm8916_s3>; |
| vddpa-supply = <&pm8916_l9>; |
| vdddig-supply = <&pm8916_l5>; |
| }; |
| |
| smd-edge { |
| interrupts = <0 142 1>; |
| |
| qcom,ipc = <&apcs 8 17>; |
| qcom,smd-edge = <6>; |
| qcom,remote-pid = <4>; |
| |
| label = "pronto"; |
| |
| wcnss { |
| compatible = "qcom,wcnss"; |
| qcom,smd-channels = "WCNSS_CTRL"; |
| |
| qcom,mmio = <&pronto>; |
| |
| bt { |
| compatible = "qcom,wcnss-bt"; |
| }; |
| |
| wifi { |
| compatible = "qcom,wcnss-wlan"; |
| |
| interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>, |
| <0 146 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "tx", "rx"; |
| |
| qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; |
| qcom,smem-state-names = "tx-enable", "tx-rings-empty"; |
| }; |
| }; |
| }; |
| }; |
| |
| tpiu@820000 { |
| compatible = "arm,coresight-tpiu", "arm,primecell"; |
| reg = <0x820000 0x1000>; |
| |
| clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; |
| clock-names = "apb_pclk", "atclk"; |
| |
| port { |
| tpiu_in: endpoint { |
| slave-mode; |
| remote-endpoint = <&replicator_out1>; |
| }; |
| }; |
| }; |
| |
| funnel@821000 { |
| compatible = "arm,coresight-funnel", "arm,primecell"; |
| reg = <0x821000 0x1000>; |
| |
| clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; |
| clock-names = "apb_pclk", "atclk"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| /* |
| * Not described input ports: |
| * 0 - connected to Resource and Power Manger CPU ETM |
| * 1 - not-connected |
| * 2 - connected to Modem CPU ETM |
| * 3 - not-connected |
| * 5 - not-connected |
| * 6 - connected trought funnel to Wireless CPU ETM |
| * 7 - connected to STM component |
| */ |
| |
| port@4 { |
| reg = <4>; |
| funnel0_in4: endpoint { |
| slave-mode; |
| remote-endpoint = <&funnel1_out>; |
| }; |
| }; |
| port@8 { |
| reg = <0>; |
| funnel0_out: endpoint { |
| remote-endpoint = <&etf_in>; |
| }; |
| }; |
| }; |
| }; |
| |
| replicator@824000 { |
| compatible = "qcom,coresight-replicator1x", "arm,primecell"; |
| reg = <0x824000 0x1000>; |
| |
| clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; |
| clock-names = "apb_pclk", "atclk"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| replicator_out0: endpoint { |
| remote-endpoint = <&etr_in>; |
| }; |
| }; |
| port@1 { |
| reg = <1>; |
| replicator_out1: endpoint { |
| remote-endpoint = <&tpiu_in>; |
| }; |
| }; |
| port@2 { |
| reg = <0>; |
| replicator_in: endpoint { |
| slave-mode; |
| remote-endpoint = <&etf_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| etf@825000 { |
| compatible = "arm,coresight-tmc", "arm,primecell"; |
| reg = <0x825000 0x1000>; |
| |
| clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; |
| clock-names = "apb_pclk", "atclk"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| etf_out: endpoint { |
| slave-mode; |
| remote-endpoint = <&funnel0_out>; |
| }; |
| }; |
| port@1 { |
| reg = <0>; |
| etf_in: endpoint { |
| remote-endpoint = <&replicator_in>; |
| }; |
| }; |
| }; |
| }; |
| |
| etr@826000 { |
| compatible = "arm,coresight-tmc", "arm,primecell"; |
| reg = <0x826000 0x1000>; |
| |
| clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; |
| clock-names = "apb_pclk", "atclk"; |
| |
| port { |
| etr_in: endpoint { |
| slave-mode; |
| remote-endpoint = <&replicator_out0>; |
| }; |
| }; |
| }; |
| |
| funnel@841000 { /* APSS funnel only 4 inputs are used */ |
| compatible = "arm,coresight-funnel", "arm,primecell"; |
| reg = <0x841000 0x1000>; |
| |
| clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; |
| clock-names = "apb_pclk", "atclk"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| funnel1_in0: endpoint { |
| slave-mode; |
| remote-endpoint = <&etm0_out>; |
| }; |
| }; |
| port@1 { |
| reg = <1>; |
| funnel1_in1: endpoint { |
| slave-mode; |
| remote-endpoint = <&etm1_out>; |
| }; |
| }; |
| port@2 { |
| reg = <2>; |
| funnel1_in2: endpoint { |
| slave-mode; |
| remote-endpoint = <&etm2_out>; |
| }; |
| }; |
| port@3 { |
| reg = <3>; |
| funnel1_in3: endpoint { |
| slave-mode; |
| remote-endpoint = <&etm3_out>; |
| }; |
| }; |
| port@4 { |
| reg = <0>; |
| funnel1_out: endpoint { |
| remote-endpoint = <&funnel0_in4>; |
| }; |
| }; |
| }; |
| }; |
| |
| debug@850000 { |
| compatible = "arm,coresight-cpu-debug","arm,primecell"; |
| reg = <0x850000 0x1000>; |
| clocks = <&rpmcc RPM_QDSS_CLK>; |
| clock-names = "apb_pclk"; |
| cpu = <&CPU0>; |
| }; |
| |
| debug@852000 { |
| compatible = "arm,coresight-cpu-debug","arm,primecell"; |
| reg = <0x852000 0x1000>; |
| clocks = <&rpmcc RPM_QDSS_CLK>; |
| clock-names = "apb_pclk"; |
| cpu = <&CPU1>; |
| }; |
| |
| debug@854000 { |
| compatible = "arm,coresight-cpu-debug","arm,primecell"; |
| reg = <0x854000 0x1000>; |
| clocks = <&rpmcc RPM_QDSS_CLK>; |
| clock-names = "apb_pclk"; |
| cpu = <&CPU2>; |
| }; |
| |
| debug@856000 { |
| compatible = "arm,coresight-cpu-debug","arm,primecell"; |
| reg = <0x856000 0x1000>; |
| clocks = <&rpmcc RPM_QDSS_CLK>; |
| clock-names = "apb_pclk"; |
| cpu = <&CPU3>; |
| }; |
| |
| etm@85c000 { |
| compatible = "arm,coresight-etm4x", "arm,primecell"; |
| reg = <0x85c000 0x1000>; |
| |
| clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; |
| clock-names = "apb_pclk", "atclk"; |
| |
| cpu = <&CPU0>; |
| |
| port { |
| etm0_out: endpoint { |
| remote-endpoint = <&funnel1_in0>; |
| }; |
| }; |
| }; |
| |
| etm@85d000 { |
| compatible = "arm,coresight-etm4x", "arm,primecell"; |
| reg = <0x85d000 0x1000>; |
| |
| clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; |
| clock-names = "apb_pclk", "atclk"; |
| |
| cpu = <&CPU1>; |
| |
| port { |
| etm1_out: endpoint { |
| remote-endpoint = <&funnel1_in1>; |
| }; |
| }; |
| }; |
| |
| etm@85e000 { |
| compatible = "arm,coresight-etm4x", "arm,primecell"; |
| reg = <0x85e000 0x1000>; |
| |
| clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; |
| clock-names = "apb_pclk", "atclk"; |
| |
| cpu = <&CPU2>; |
| |
| port { |
| etm2_out: endpoint { |
| remote-endpoint = <&funnel1_in2>; |
| }; |
| }; |
| }; |
| |
| etm@85f000 { |
| compatible = "arm,coresight-etm4x", "arm,primecell"; |
| reg = <0x85f000 0x1000>; |
| |
| clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; |
| clock-names = "apb_pclk", "atclk"; |
| |
| cpu = <&CPU3>; |
| |
| port { |
| etm3_out: endpoint { |
| remote-endpoint = <&funnel1_in3>; |
| }; |
| }; |
| }; |
| }; |
| |
| smd { |
| compatible = "qcom,smd"; |
| |
| rpm { |
| interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; |
| qcom,ipc = <&apcs 8 0>; |
| qcom,smd-edge = <15>; |
| |
| rpm_requests { |
| compatible = "qcom,rpm-msm8916"; |
| qcom,smd-channels = "rpm_requests"; |
| |
| rpmcc: qcom,rpmcc { |
| compatible = "qcom,rpmcc-msm8916"; |
| #clock-cells = <1>; |
| }; |
| |
| smd_rpm_regulators: pm8916-regulators { |
| compatible = "qcom,rpm-pm8916-regulators"; |
| |
| pm8916_s1: s1 {}; |
| pm8916_s3: s3 {}; |
| pm8916_s4: s4 {}; |
| |
| pm8916_l1: l1 {}; |
| pm8916_l2: l2 {}; |
| pm8916_l3: l3 {}; |
| pm8916_l4: l4 {}; |
| pm8916_l5: l5 {}; |
| pm8916_l6: l6 {}; |
| pm8916_l7: l7 {}; |
| pm8916_l8: l8 {}; |
| pm8916_l9: l9 {}; |
| pm8916_l10: l10 {}; |
| pm8916_l11: l11 {}; |
| pm8916_l12: l12 {}; |
| pm8916_l13: l13 {}; |
| pm8916_l14: l14 {}; |
| pm8916_l15: l15 {}; |
| pm8916_l16: l16 {}; |
| pm8916_l17: l17 {}; |
| pm8916_l18: l18 {}; |
| }; |
| }; |
| }; |
| }; |
| |
| hexagon-smp2p { |
| compatible = "qcom,smp2p"; |
| qcom,smem = <435>, <428>; |
| |
| interrupts = <0 27 IRQ_TYPE_EDGE_RISING>; |
| |
| qcom,ipc = <&apcs 8 14>; |
| |
| qcom,local-pid = <0>; |
| qcom,remote-pid = <1>; |
| |
| hexagon_smp2p_out: master-kernel { |
| qcom,entry-name = "master-kernel"; |
| |
| #qcom,smem-state-cells = <1>; |
| }; |
| |
| hexagon_smp2p_in: slave-kernel { |
| qcom,entry-name = "slave-kernel"; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| wcnss-smp2p { |
| compatible = "qcom,smp2p"; |
| qcom,smem = <451>, <431>; |
| |
| interrupts = <0 143 IRQ_TYPE_EDGE_RISING>; |
| |
| qcom,ipc = <&apcs 8 18>; |
| |
| qcom,local-pid = <0>; |
| qcom,remote-pid = <4>; |
| |
| wcnss_smp2p_out: master-kernel { |
| qcom,entry-name = "master-kernel"; |
| |
| #qcom,smem-state-cells = <1>; |
| }; |
| |
| wcnss_smp2p_in: slave-kernel { |
| qcom,entry-name = "slave-kernel"; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| smsm { |
| compatible = "qcom,smsm"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| qcom,ipc-1 = <&apcs 0 13>; |
| qcom,ipc-6 = <&apcs 0 19>; |
| |
| apps_smsm: apps@0 { |
| reg = <0>; |
| |
| #qcom,smem-state-cells = <1>; |
| }; |
| |
| hexagon_smsm: hexagon@1 { |
| reg = <1>; |
| interrupts = <0 26 IRQ_TYPE_EDGE_RISING>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| wcnss_smsm: wcnss@6 { |
| reg = <6>; |
| interrupts = <0 144 IRQ_TYPE_EDGE_RISING>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| }; |
| |
| #include "msm8916-pins.dtsi" |