| config SND_SOC_FSL_SSI |
| tristate |
| |
| config SND_SOC_FSL_UTILS |
| tristate |
| |
| menuconfig SND_POWERPC_SOC |
| tristate "SoC Audio for Freescale PowerPC CPUs" |
| depends on FSL_SOC || PPC_MPC52xx |
| help |
| Say Y or M if you want to add support for codecs attached to |
| the PowerPC CPUs. |
| |
| if SND_POWERPC_SOC |
| |
| config SND_MPC52xx_DMA |
| tristate |
| |
| config SND_SOC_POWERPC_DMA |
| tristate |
| |
| config SND_SOC_MPC8610_HPCD |
| tristate "ALSA SoC support for the Freescale MPC8610 HPCD board" |
| # I2C is necessary for the CS4270 driver |
| depends on MPC8610_HPCD && I2C |
| select SND_SOC_FSL_SSI |
| select SND_SOC_FSL_UTILS |
| select SND_SOC_POWERPC_DMA |
| select SND_SOC_CS4270 |
| select SND_SOC_CS4270_VD33_ERRATA |
| default y if MPC8610_HPCD |
| help |
| Say Y if you want to enable audio on the Freescale MPC8610 HPCD. |
| |
| config SND_SOC_P1022_DS |
| tristate "ALSA SoC support for the Freescale P1022 DS board" |
| # I2C is necessary for the WM8776 driver |
| depends on P1022_DS && I2C |
| select SND_SOC_FSL_SSI |
| select SND_SOC_FSL_UTILS |
| select SND_SOC_POWERPC_DMA |
| select SND_SOC_WM8776 |
| default y if P1022_DS |
| help |
| Say Y if you want to enable audio on the Freescale P1022 DS board. |
| This will also include the Wolfson Microelectronics WM8776 codec |
| driver. |
| |
| config SND_SOC_P1022_RDK |
| tristate "ALSA SoC support for the Freescale / iVeia P1022 RDK board" |
| # I2C is necessary for the WM8960 driver |
| depends on P1022_RDK && I2C |
| select SND_SOC_FSL_SSI |
| select SND_SOC_FSL_UTILS |
| select SND_SOC_POWERPC_DMA |
| select SND_SOC_WM8960 |
| default y if P1022_RDK |
| help |
| Say Y if you want to enable audio on the Freescale / iVeia |
| P1022 RDK board. This will also include the Wolfson |
| Microelectronics WM8960 codec driver. |
| |
| config SND_SOC_MPC5200_I2S |
| tristate "Freescale MPC5200 PSC in I2S mode driver" |
| depends on PPC_MPC52xx && PPC_BESTCOMM |
| select SND_MPC52xx_DMA |
| select PPC_BESTCOMM_GEN_BD |
| help |
| Say Y here to support the MPC5200 PSCs in I2S mode. |
| |
| config SND_SOC_MPC5200_AC97 |
| tristate "Freescale MPC5200 PSC in AC97 mode driver" |
| depends on PPC_MPC52xx && PPC_BESTCOMM |
| select SND_SOC_AC97_BUS |
| select SND_MPC52xx_DMA |
| select PPC_BESTCOMM_GEN_BD |
| help |
| Say Y here to support the MPC5200 PSCs in AC97 mode. |
| |
| config SND_MPC52xx_SOC_PCM030 |
| tristate "SoC AC97 Audio support for Phytec pcm030 and WM9712" |
| depends on PPC_MPC5200_SIMPLE |
| select SND_SOC_MPC5200_AC97 |
| select SND_SOC_WM9712 |
| help |
| Say Y if you want to add support for sound on the Phytec pcm030 |
| baseboard. |
| |
| config SND_MPC52xx_SOC_EFIKA |
| tristate "SoC AC97 Audio support for bbplan Efika and STAC9766" |
| depends on PPC_EFIKA |
| select SND_SOC_MPC5200_AC97 |
| select SND_SOC_STAC9766 |
| help |
| Say Y if you want to add support for sound on the Efika. |
| |
| endif # SND_POWERPC_SOC |
| |
| menuconfig SND_IMX_SOC |
| tristate "SoC Audio for Freescale i.MX CPUs" |
| depends on ARCH_MXC || COMPILE_TEST |
| help |
| Say Y or M if you want to add support for codecs attached to |
| the i.MX CPUs. |
| |
| if SND_IMX_SOC |
| |
| config SND_SOC_IMX_SSI |
| tristate |
| |
| config SND_SOC_IMX_PCM_FIQ |
| tristate |
| select FIQ |
| |
| config SND_SOC_IMX_PCM_DMA |
| tristate |
| select SND_SOC_GENERIC_DMAENGINE_PCM |
| |
| config SND_SOC_IMX_AUDMUX |
| tristate |
| |
| config SND_MXC_SOC_WM1133_EV1 |
| tristate "Audio on the i.MX31ADS with WM1133-EV1 fitted" |
| depends on MACH_MX31ADS_WM1133_EV1 |
| select SND_SOC_WM8350 |
| select SND_SOC_IMX_PCM_FIQ |
| select SND_SOC_IMX_AUDMUX |
| select SND_SOC_IMX_SSI |
| help |
| Enable support for audio on the i.MX31ADS with the WM1133-EV1 |
| PMIC board with WM8835x fitted. |
| |
| config SND_SOC_MX27VIS_AIC32X4 |
| tristate "SoC audio support for Visstrim M10 boards" |
| depends on MACH_IMX27_VISSTRIM_M10 && I2C |
| select SND_SOC_TLV320AIC32X4 |
| select SND_SOC_IMX_PCM_DMA |
| select SND_SOC_IMX_AUDMUX |
| select SND_SOC_IMX_SSI |
| help |
| Say Y if you want to add support for SoC audio on Visstrim SM10 |
| board with TLV320AIC32X4 codec. |
| |
| config SND_SOC_PHYCORE_AC97 |
| tristate "SoC Audio support for Phytec phyCORE (and phyCARD) boards" |
| depends on MACH_PCM043 || MACH_PCA100 |
| select SND_SOC_AC97_BUS |
| select SND_SOC_WM9712 |
| select SND_SOC_IMX_PCM_FIQ |
| select SND_SOC_IMX_AUDMUX |
| select SND_SOC_IMX_SSI |
| help |
| Say Y if you want to add support for SoC audio on Phytec phyCORE |
| and phyCARD boards in AC97 mode |
| |
| config SND_SOC_EUKREA_TLV320 |
| tristate "Eukrea TLV320" |
| depends on MACH_EUKREA_MBIMX27_BASEBOARD \ |
| || MACH_EUKREA_MBIMXSD25_BASEBOARD \ |
| || MACH_EUKREA_MBIMXSD35_BASEBOARD \ |
| || MACH_EUKREA_MBIMXSD51_BASEBOARD |
| depends on I2C |
| select SND_SOC_TLV320AIC23 |
| select SND_SOC_IMX_PCM_FIQ |
| select SND_SOC_IMX_AUDMUX |
| select SND_SOC_IMX_SSI |
| help |
| Enable I2S based access to the TLV320AIC23B codec attached |
| to the SSI interface |
| |
| config SND_SOC_IMX_WM8962 |
| tristate "SoC Audio support for i.MX boards with wm8962" |
| depends on OF && I2C |
| select SND_SOC_WM8962 |
| select SND_SOC_IMX_PCM_DMA |
| select SND_SOC_IMX_AUDMUX |
| select SND_SOC_FSL_SSI |
| select SND_SOC_FSL_UTILS |
| help |
| Say Y if you want to add support for SoC audio on an i.MX board with |
| a wm8962 codec. |
| |
| config SND_SOC_IMX_SGTL5000 |
| tristate "SoC Audio support for i.MX boards with sgtl5000" |
| depends on OF && I2C |
| select SND_SOC_SGTL5000 |
| select SND_SOC_IMX_PCM_DMA |
| select SND_SOC_IMX_AUDMUX |
| select SND_SOC_FSL_SSI |
| select SND_SOC_FSL_UTILS |
| help |
| Say Y if you want to add support for SoC audio on an i.MX board with |
| a sgtl5000 codec. |
| |
| config SND_SOC_IMX_MC13783 |
| tristate "SoC Audio support for I.MX boards with mc13783" |
| depends on MFD_MC13783 && ARCH_ARM |
| select SND_SOC_IMX_SSI |
| select SND_SOC_IMX_AUDMUX |
| select SND_SOC_MC13783 |
| select SND_SOC_IMX_PCM_DMA |
| |
| endif # SND_IMX_SOC |