drm/i915: Match all PSR mode entry conditions before enabling it.
v2: Prefer seq_puts to seq_printf by Paulo Zanoni.
v3: small changes like avoiding calling dp_to_dig_port twice as noticed by
Paulo Zanoni.
v4: Avoiding reading non-existent registers - noticed by Paulo
on first psr debugfs patch.
v5: Accepting more suggestions from Paulo:
* check sw interlace flag instead of i915_read
* introduce PSR_S3D_ENABLED to avoid forgeting it whenever added.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Shobhit Kumar <shobhit.kumar@intel.com>
[danvet: Fix up debugfs output (spotted by Paulo) and rip out the
power well check since we really can't do that in a race-free manner,
so it's bogus.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 65619e6..973f272 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -1550,17 +1550,49 @@
struct drm_info_node *node = m->private;
struct drm_device *dev = node->minor->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- u32 psrctl, psrstat, psrperf;
+ u32 psrstat, psrperf;
if (!IS_HASWELL(dev)) {
seq_puts(m, "PSR not supported on this platform\n");
+ } else if (IS_HASWELL(dev) && I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE) {
+ seq_puts(m, "PSR enabled\n");
+ } else {
+ seq_puts(m, "PSR disabled: ");
+ switch (dev_priv->no_psr_reason) {
+ case PSR_NO_SOURCE:
+ seq_puts(m, "not supported on this platform");
+ break;
+ case PSR_NO_SINK:
+ seq_puts(m, "not supported by panel");
+ break;
+ case PSR_CRTC_NOT_ACTIVE:
+ seq_puts(m, "crtc not active");
+ break;
+ case PSR_PWR_WELL_ENABLED:
+ seq_puts(m, "power well enabled");
+ break;
+ case PSR_NOT_TILED:
+ seq_puts(m, "not tiled");
+ break;
+ case PSR_SPRITE_ENABLED:
+ seq_puts(m, "sprite enabled");
+ break;
+ case PSR_S3D_ENABLED:
+ seq_puts(m, "stereo 3d enabled");
+ break;
+ case PSR_INTERLACED_ENABLED:
+ seq_puts(m, "interlaced enabled");
+ break;
+ case PSR_HSW_NOT_DDIA:
+ seq_puts(m, "HSW ties PSR to DDI A (eDP)");
+ break;
+ default:
+ seq_puts(m, "unknown reason");
+ }
+ seq_puts(m, "\n");
return 0;
}
- psrctl = I915_READ(EDP_PSR_CTL);
- seq_printf(m, "PSR Enabled: %s\n",
- yesno(psrctl & EDP_PSR_ENABLE));
-
psrstat = I915_READ(EDP_PSR_STATUS_CTL);
seq_puts(m, "PSR Current State: ");
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index bd1b95e..21d55f8 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -593,6 +593,17 @@
} no_fbc_reason;
};
+enum no_psr_reason {
+ PSR_NO_SOURCE, /* Not supported on platform */
+ PSR_NO_SINK, /* Not supported by panel */
+ PSR_CRTC_NOT_ACTIVE,
+ PSR_PWR_WELL_ENABLED,
+ PSR_NOT_TILED,
+ PSR_SPRITE_ENABLED,
+ PSR_S3D_ENABLED,
+ PSR_INTERLACED_ENABLED,
+ PSR_HSW_NOT_DDIA,
+};
enum intel_pch {
PCH_NONE = 0, /* No PCH present */
@@ -1173,6 +1184,8 @@
/* Haswell power well */
struct i915_power_well power_well;
+ enum no_psr_reason no_psr_reason;
+
struct i915_gpu_error gpu_error;
struct drm_i915_gem_object *vlv_pctx;
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index bb898bfe..1d71096 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4150,6 +4150,13 @@
#define HSW_TVIDEO_DIP_VSC_DATA(trans) \
_TRANSCODER(trans, HSW_VIDEO_DIP_VSC_DATA_A, HSW_VIDEO_DIP_VSC_DATA_B)
+#define HSW_STEREO_3D_CTL_A 0x70020
+#define S3D_ENABLE (1<<31)
+#define HSW_STEREO_3D_CTL_B 0x71020
+
+#define HSW_STEREO_3D_CTL(trans) \
+ _TRANSCODER(trans, HSW_STEREO_3D_CTL_A, HSW_STEREO_3D_CTL_A)
+
#define _PCH_TRANS_HTOTAL_B 0xe1000
#define _PCH_TRANS_HBLANK_B 0xe1004
#define _PCH_TRANS_HSYNC_B 0xe1008
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index bb3593d..3ce1b87 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1492,11 +1492,76 @@
EDP_PSR_ENABLE);
}
+static bool intel_edp_psr_match_conditions(struct intel_dp *intel_dp)
+{
+ struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = dig_port->base.base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_crtc *crtc = dig_port->base.base.crtc;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct drm_i915_gem_object *obj = to_intel_framebuffer(crtc->fb)->obj;
+ struct intel_encoder *intel_encoder = &dp_to_dig_port(intel_dp)->base;
+
+ if (!IS_HASWELL(dev)) {
+ DRM_DEBUG_KMS("PSR not supported on this platform\n");
+ dev_priv->no_psr_reason = PSR_NO_SOURCE;
+ return false;
+ }
+
+ if ((intel_encoder->type != INTEL_OUTPUT_EDP) ||
+ (dig_port->port != PORT_A)) {
+ DRM_DEBUG_KMS("HSW ties PSR to DDI A (eDP)\n");
+ dev_priv->no_psr_reason = PSR_HSW_NOT_DDIA;
+ return false;
+ }
+
+ if (!is_edp_psr(intel_dp)) {
+ DRM_DEBUG_KMS("PSR not supported by this panel\n");
+ dev_priv->no_psr_reason = PSR_NO_SINK;
+ return false;
+ }
+
+ if (!intel_crtc->active || !crtc->fb || !crtc->mode.clock) {
+ DRM_DEBUG_KMS("crtc not active for PSR\n");
+ dev_priv->no_psr_reason = PSR_CRTC_NOT_ACTIVE;
+ return false;
+ }
+
+ if (obj->tiling_mode != I915_TILING_X ||
+ obj->fence_reg == I915_FENCE_REG_NONE) {
+ DRM_DEBUG_KMS("PSR condition failed: fb not tiled or fenced\n");
+ dev_priv->no_psr_reason = PSR_NOT_TILED;
+ return false;
+ }
+
+ if (I915_READ(SPRCTL(intel_crtc->pipe)) & SPRITE_ENABLE) {
+ DRM_DEBUG_KMS("PSR condition failed: Sprite is Enabled\n");
+ dev_priv->no_psr_reason = PSR_SPRITE_ENABLED;
+ return false;
+ }
+
+ if (I915_READ(HSW_STEREO_3D_CTL(intel_crtc->config.cpu_transcoder)) &
+ S3D_ENABLE) {
+ DRM_DEBUG_KMS("PSR condition failed: Stereo 3D is Enabled\n");
+ dev_priv->no_psr_reason = PSR_S3D_ENABLED;
+ return false;
+ }
+
+ if (crtc->mode.flags & DRM_MODE_FLAG_INTERLACE) {
+ DRM_DEBUG_KMS("PSR condition failed: Interlaced is Enabled\n");
+ dev_priv->no_psr_reason = PSR_INTERLACED_ENABLED;
+ return false;
+ }
+
+ return true;
+}
+
void intel_edp_psr_enable(struct intel_dp *intel_dp)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
- if (!is_edp_psr(intel_dp) || intel_edp_is_psr_enabled(dev))
+ if (!intel_edp_psr_match_conditions(intel_dp) ||
+ intel_edp_is_psr_enabled(dev))
return;
/* Setup PSR once */