cpufreq: intel_pstate: Correct frequency setting in the HWP mode
In the functions intel_pstate_hwp_set(), min/max range from HWP capability
MSR along with max_perf_pct and min_perf_pct, is used to set the HWP
request MSR. In some cases this doesn't result in the correct HWP max/min
in HWP request.
For example: In the following case:
HWP capabilities from MSR 0x771
0x70a1220
Here cpufreq min/max frequencies from above MSR dump are 700MHz and 3.2GHz
respectively.
This will result in
hwp_min = 0x07
hwp_max = 0x20
To limit max frequency to 2GHz:
perf_limits->max_perf_pct = 63 (2GHz as a percent of 3.2GHz rounded up)
With the current calculation:
adj_range = max_perf_pct * range / 100;
adj_range = 63 * (32 - 7) / 100
adj_range = 15
max = hw_min + adj_range;
max = 7 + 15 = 22
This will result in HWP request of 0x160f, which will result in a
frequency cap of 2.2GHz not 2GHz.
The problem with the above calculation is that hwp_min of 7 is treated
as 0% in the range. But max_perf_pct is calculated with respect to minimum
as 0 and max as 3.2GHz or hwp_max, so adding hwp_min to it will result in
more than the desired.
Since the min_perf_pct and max_perf_pct is already a percent of max
frequency or hwp_max, this min/max HWP request value can be calculated
directly applying these percentage to hwp_max.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
index f9fe910..ee12641 100644
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -845,7 +845,7 @@
static void intel_pstate_hwp_set(struct cpufreq_policy *policy)
{
- int min, hw_min, max, hw_max, cpu, range, adj_range;
+ int min, hw_min, max, hw_max, cpu;
struct perf_limits *perf_limits = limits;
u64 value, cap;
@@ -863,20 +863,17 @@
hw_max = HWP_GUARANTEED_PERF(cap);
else
hw_max = HWP_HIGHEST_PERF(cap);
- range = hw_max - hw_min;
max_perf_pct = perf_limits->max_perf_pct;
min_perf_pct = perf_limits->min_perf_pct;
+ min = hw_max * min_perf_pct / 100;
rdmsrl_on_cpu(cpu, MSR_HWP_REQUEST, &value);
- adj_range = min_perf_pct * range / 100;
- min = hw_min + adj_range;
+
value &= ~HWP_MIN_PERF(~0L);
value |= HWP_MIN_PERF(min);
- adj_range = max_perf_pct * range / 100;
- max = hw_min + adj_range;
-
+ max = hw_max * max_perf_pct / 100;
value &= ~HWP_MAX_PERF(~0L);
value |= HWP_MAX_PERF(max);