power_supply: Add battery health reporting for WM8350
Implement support for reporting battery health in the WM8350 battery
interface. Since we are now able to report this via the classs remove
the diagnostics from the interrupt handler.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
diff --git a/drivers/mfd/wm8350-regmap.c b/drivers/mfd/wm8350-regmap.c
index aaf394a..b43d64c 100644
--- a/drivers/mfd/wm8350-regmap.c
+++ b/drivers/mfd/wm8350-regmap.c
@@ -1314,7 +1314,7 @@
{ 0xFFFF, 0xFFFF, 0xFFFF }, /* R223 */
{ 0x0000, 0x0000, 0x0000 }, /* R224 */
{ 0x8F3F, 0x0000, 0xFFFF }, /* R225 - DCDC/LDO status */
- { 0x0000, 0x0000, 0x0000 }, /* R226 */
+ { 0x0000, 0x0000, 0xFFFF }, /* R226 - Charger status */
{ 0x0000, 0x0000, 0xFFFF }, /* R227 */
{ 0x0000, 0x0000, 0x0000 }, /* R228 */
{ 0x0000, 0x0000, 0x0000 }, /* R229 */
diff --git a/drivers/power/wm8350_power.c b/drivers/power/wm8350_power.c
index 74e7593..1b16bf3 100644
--- a/drivers/power/wm8350_power.c
+++ b/drivers/power/wm8350_power.c
@@ -190,22 +190,18 @@
struct wm8350_charger_policy *policy = power->policy;
switch (irq) {
- case WM8350_IRQ_CHG_BAT_HOT:
- dev_err(wm8350->dev, "battery too hot\n");
- break;
- case WM8350_IRQ_CHG_BAT_COLD:
- dev_err(wm8350->dev, "battery too cold\n");
- break;
case WM8350_IRQ_CHG_BAT_FAIL:
dev_err(wm8350->dev, "battery failed\n");
break;
case WM8350_IRQ_CHG_TO:
dev_err(wm8350->dev, "charger timeout\n");
- break;
- case WM8350_IRQ_CHG_END:
power_supply_changed(&power->battery);
break;
+
+ case WM8350_IRQ_CHG_BAT_HOT:
+ case WM8350_IRQ_CHG_BAT_COLD:
case WM8350_IRQ_CHG_START:
+ case WM8350_IRQ_CHG_END:
power_supply_changed(&power->battery);
break;
@@ -308,6 +304,23 @@
* Battery properties
*********************************************************************/
+static int wm8350_bat_check_health(struct wm8350 *wm8350)
+{
+ u16 reg;
+
+ if (wm8350_read_battery_uvolts(wm8350) < 2850000)
+ return POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+
+ reg = wm8350_reg_read(wm8350, WM8350_CHARGER_OVERRIDES);
+ if (reg & WM8350_CHG_BATT_HOT_OVRDE)
+ return POWER_SUPPLY_HEALTH_OVERHEAT;
+
+ if (reg & WM8350_CHG_BATT_COLD_OVRDE)
+ return POWER_SUPPLY_HEALTH_COLD;
+
+ return POWER_SUPPLY_HEALTH_GOOD;
+}
+
static int wm8350_bat_get_property(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
@@ -326,6 +339,9 @@
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
val->intval = wm8350_read_battery_uvolts(wm8350);
break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ val->intval = wm8350_bat_check_health(wm8350);
+ break;
default:
ret = -EINVAL;
break;
@@ -338,6 +354,7 @@
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_ONLINE,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_HEALTH,
};
/*********************************************************************
diff --git a/include/linux/mfd/wm8350/core.h b/include/linux/mfd/wm8350/core.h
index 2a7abee..afeff6f 100644
--- a/include/linux/mfd/wm8350/core.h
+++ b/include/linux/mfd/wm8350/core.h
@@ -58,6 +58,7 @@
#define WM8350_OVER_CURRENT_INT_STATUS_MASK 0x25
#define WM8350_GPIO_INT_STATUS_MASK 0x26
#define WM8350_COMPARATOR_INT_STATUS_MASK 0x27
+#define WM8350_CHARGER_OVERRIDES 0xE2
#define WM8350_MISC_OVERRIDES 0xE3
#define WM8350_COMPARATOR_OVERRIDES 0xE7
#define WM8350_STATE_MACHINE_STATUS 0xE9
@@ -533,6 +534,12 @@
#define WM8350_DC1_STS 0x0001
/*
+ * R226 (0xE2) - Charger status
+ */
+#define WM8350_CHG_BATT_HOT_OVRDE 0x8000
+#define WM8350_CHG_BATT_COLD_OVRDE 0x4000
+
+/*
* R227 (0xE3) - Misc Overrides
*/
#define WM8350_USB_LIMIT_OVRDE 0x0400