drivers/ide/legacy/ali14xx.c - kernel/msm-4.19 - Gitiles

 /*
  *  linux/drivers/ide/legacy/ali14xx.c		Version 0.03	Feb 09, 1996
  *
  *  Copyright (C) 1996  Linus Torvalds & author (see below)
  */

 /*
  * ALI M14xx chipset EIDE controller
  *
  * Works for ALI M1439/1443/1445/1487/1489 chipsets.
  *
  * Adapted from code developed by derekn@vw.ece.cmu.edu.  -ml
  * Derek's notes follow:
  *
  * I think the code should be pretty understandable,
  * but I'll be happy to (try to) answer questions.
  *
  * The critical part is in the setupDrive function.  The initRegisters
  * function doesn't seem to be necessary, but the DOS driver does it, so
  * I threw it in.
  *
  * I've only tested this on my system, which only has one disk.  I posted
  * it to comp.sys.linux.hardware, so maybe some other people will try it
  * out.
  *
  * Derek Noonburg  (derekn@ece.cmu.edu)
  * 95-sep-26
  *
  * Update 96-jul-13:
  *
  * I've since upgraded to two disks and a CD-ROM, with no trouble, and
  * I've also heard from several others who have used it successfully.
  * This driver appears to work with both the 1443/1445 and the 1487/1489
  * chipsets.  I've added support for PIO mode 4 for the 1487.  This
  * seems to work just fine on the 1443 also, although I'm not sure it's
  * advertised as supporting mode 4.  (I've been running a WDC AC21200 in
  * mode 4 for a while now with no trouble.)  -Derek
  */

 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
 #include <linux/timer.h>
 #include <linux/mm.h>
 #include <linux/ioport.h>
 #include <linux/blkdev.h>
 #include <linux/hdreg.h>
 #include <linux/ide.h>
 #include <linux/init.h>

 #include <asm/io.h>

 /* port addresses for auto-detection */
 #define ALI_NUM_PORTS 4
 static int ports[ALI_NUM_PORTS] __initdata = {0x074, 0x0f4, 0x034, 0x0e4};

 /* register initialization data */
 typedef struct { u8 reg, data; } RegInitializer;

 static RegInitializer initData[] __initdata = {
 	{0x01, 0x0f}, {0x02, 0x00}, {0x03, 0x00}, {0x04, 0x00},
 	{0x05, 0x00}, {0x06, 0x00}, {0x07, 0x2b}, {0x0a, 0x0f},
 	{0x25, 0x00}, {0x26, 0x00}, {0x27, 0x00}, {0x28, 0x00},
 	{0x29, 0x00}, {0x2a, 0x00}, {0x2f, 0x00}, {0x2b, 0x00},
 	{0x2c, 0x00}, {0x2d, 0x00}, {0x2e, 0x00}, {0x30, 0x00},
 	{0x31, 0x00}, {0x32, 0x00}, {0x33, 0x00}, {0x34, 0xff},
 	{0x35, 0x03}, {0x00, 0x00}
 };

 #define ALI_MAX_PIO 4

 /* timing parameter registers for each drive */
 static struct { u8 reg1, reg2, reg3, reg4; } regTab[4] = {
 	{0x03, 0x26, 0x04, 0x27},     /* drive 0 */
 	{0x05, 0x28, 0x06, 0x29},     /* drive 1 */
 	{0x2b, 0x30, 0x2c, 0x31},     /* drive 2 */
 	{0x2d, 0x32, 0x2e, 0x33},     /* drive 3 */
 };

 static int basePort;	/* base port address */
 static int regPort;	/* port for register number */
 static int dataPort;	/* port for register data */
 static u8 regOn;	/* output to base port to access registers */
 static u8 regOff;	/* output to base port to close registers */

 /*------------------------------------------------------------------------*/

 /*
  * Read a controller register.
  */
 static inline u8 inReg (u8 reg)
 {
 	outb_p(reg, regPort);
 	return inb(dataPort);
 }

 /*
  * Write a controller register.
  */
 static void outReg (u8 data, u8 reg)
 {
 	outb_p(reg, regPort);
 	outb_p(data, dataPort);
 }

 /*
  * Set PIO mode for the specified drive.
  * This function computes timing parameters
  * and sets controller registers accordingly.
  */
 static void ali14xx_tune_drive (ide_drive_t *drive, u8 pio)
 {
 	int driveNum;
 	int time1, time2;
 	u8 param1, param2, param3, param4;
 	unsigned long flags;
 	int bus_speed = system_bus_clock();

 	pio = ide_get_best_pio_mode(drive, pio, ALI_MAX_PIO);

 	/* calculate timing, according to PIO mode */
 	time1 = ide_pio_cycle_time(drive, pio);
 	time2 = ide_pio_timings[pio].active_time;
 	param3 = param1 = (time2 * bus_speed + 999) / 1000;
 	param4 = param2 = (time1 * bus_speed + 999) / 1000 - param1;
 	if (pio < 3) {
 		param3 += 8;
 		param4 += 8;
 	}
 	printk(KERN_DEBUG "%s: PIO mode%d, t1=%dns, t2=%dns, cycles = %d+%d, %d+%d\n",
 		drive->name, pio, time1, time2, param1, param2, param3, param4);

 	/* stuff timing parameters into controller registers */
 	driveNum = (HWIF(drive)->index << 1) + drive->select.b.unit;
 	spin_lock_irqsave(&ide_lock, flags);
 	outb_p(regOn, basePort);
 	outReg(param1, regTab[driveNum].reg1);
 	outReg(param2, regTab[driveNum].reg2);
 	outReg(param3, regTab[driveNum].reg3);
 	outReg(param4, regTab[driveNum].reg4);
 	outb_p(regOff, basePort);
 	spin_unlock_irqrestore(&ide_lock, flags);
 }

 /*
  * Auto-detect the IDE controller port.
  */
 static int __init findPort (void)
 {
 	int i;
 	u8 t;
 	unsigned long flags;

 	local_irq_save(flags);
 	for (i = 0; i < ALI_NUM_PORTS; ++i) {
 		basePort = ports[i];
 		regOff = inb(basePort);
 		for (regOn = 0x30; regOn <= 0x33; ++regOn) {
 			outb_p(regOn, basePort);
 			if (inb(basePort) == regOn) {
 				regPort = basePort + 4;
 				dataPort = basePort + 8;
 				t = inReg(0) & 0xf0;
 				outb_p(regOff, basePort);
 				local_irq_restore(flags);
 				if (t != 0x50)
 					return 0;
 				return 1;  /* success */
 			}
 		}
 		outb_p(regOff, basePort);
 	}
 	local_irq_restore(flags);
 	return 0;
 }

 /*
  * Initialize controller registers with default values.
  */
 static int __init initRegisters (void) {
 	RegInitializer *p;
 	u8 t;
 	unsigned long flags;

 	local_irq_save(flags);
 	outb_p(regOn, basePort);
 	for (p = initData; p->reg != 0; ++p)
 		outReg(p->data, p->reg);
 	outb_p(0x01, regPort);
 	t = inb(regPort) & 0x01;
 	outb_p(regOff, basePort);
 	local_irq_restore(flags);
 	return t;
 }

 static int __init ali14xx_probe(void)
 {
 	ide_hwif_t *hwif, *mate;

 	printk(KERN_DEBUG "ali14xx: base=0x%03x, regOn=0x%02x.\n",
 			  basePort, regOn);

 	/* initialize controller registers */
 	if (!initRegisters()) {
 		printk(KERN_ERR "ali14xx: Chip initialization failed.\n");
 		return 1;
 	}

 	hwif = &ide_hwifs[0];
 	mate = &ide_hwifs[1];

 	hwif->chipset = ide_ali14xx;
 	hwif->pio_mask = ATA_PIO4;
 	hwif->tuneproc = &ali14xx_tune_drive;
 	hwif->mate = mate;

 	mate->chipset = ide_ali14xx;
 	mate->pio_mask = ATA_PIO4;
 	mate->tuneproc = &ali14xx_tune_drive;
 	mate->mate = hwif;
 	mate->channel = 1;

 	probe_hwif_init(hwif);
 	probe_hwif_init(mate);

 	ide_proc_register_port(hwif);
 	ide_proc_register_port(mate);

 	return 0;
 }

 int probe_ali14xx = 0;

 module_param_named(probe, probe_ali14xx, bool, 0);
 MODULE_PARM_DESC(probe, "probe for ALI M14xx chipsets");

 /* Can be called directly from ide.c. */
 int __init ali14xx_init(void)
 {
 	if (probe_ali14xx == 0)
 		goto out;

 	/* auto-detect IDE controller port */
 	if (findPort()) {
 		if (ali14xx_probe())
 			return -ENODEV;
 		return 0;
 	}
 	printk(KERN_ERR "ali14xx: not found.\n");
 out:
 	return -ENODEV;
 }

 #ifdef MODULE
 module_init(ali14xx_init);
 #endif

 MODULE_AUTHOR("see local file");
 MODULE_DESCRIPTION("support of ALI 14XX IDE chipsets");
 MODULE_LICENSE("GPL");
	/*
	* linux/drivers/ide/legacy/ali14xx.c Version 0.03 Feb 09, 1996
	*
	* Copyright (C) 1996 Linus Torvalds & author (see below)
	*/

	/*
	* ALI M14xx chipset EIDE controller
	*
	* Works for ALI M1439/1443/1445/1487/1489 chipsets.
	*
	* Adapted from code developed by derekn@vw.ece.cmu.edu. -ml
	* Derek's notes follow:
	*
	* I think the code should be pretty understandable,
	* but I'll be happy to (try to) answer questions.
	*
	* The critical part is in the setupDrive function. The initRegisters
	* function doesn't seem to be necessary, but the DOS driver does it, so
	* I threw it in.
	*
	* I've only tested this on my system, which only has one disk. I posted
	* it to comp.sys.linux.hardware, so maybe some other people will try it
	* out.
	*
	* Derek Noonburg (derekn@ece.cmu.edu)
	* 95-sep-26
	*
	* Update 96-jul-13:
	*
	* I've since upgraded to two disks and a CD-ROM, with no trouble, and
	* I've also heard from several others who have used it successfully.
	* This driver appears to work with both the 1443/1445 and the 1487/1489
	* chipsets. I've added support for PIO mode 4 for the 1487. This
	* seems to work just fine on the 1443 also, although I'm not sure it's
	* advertised as supporting mode 4. (I've been running a WDC AC21200 in
	* mode 4 for a while now with no trouble.) -Derek
	*/

	#include <linux/module.h>
	#include <linux/types.h>
	#include <linux/kernel.h>
	#include <linux/delay.h>
	#include <linux/timer.h>
	#include <linux/mm.h>
	#include <linux/ioport.h>
	#include <linux/blkdev.h>
	#include <linux/hdreg.h>
	#include <linux/ide.h>
	#include <linux/init.h>

	#include <asm/io.h>

	/* port addresses for auto-detection */
	#define ALI_NUM_PORTS 4
	static int ports[ALI_NUM_PORTS] __initdata = {0x074, 0x0f4, 0x034, 0x0e4};

	/* register initialization data */
	typedef struct { u8 reg, data; } RegInitializer;

	static RegInitializer initData[] __initdata = {
	{0x01, 0x0f}, {0x02, 0x00}, {0x03, 0x00}, {0x04, 0x00},
	{0x05, 0x00}, {0x06, 0x00}, {0x07, 0x2b}, {0x0a, 0x0f},
	{0x25, 0x00}, {0x26, 0x00}, {0x27, 0x00}, {0x28, 0x00},
	{0x29, 0x00}, {0x2a, 0x00}, {0x2f, 0x00}, {0x2b, 0x00},
	{0x2c, 0x00}, {0x2d, 0x00}, {0x2e, 0x00}, {0x30, 0x00},
	{0x31, 0x00}, {0x32, 0x00}, {0x33, 0x00}, {0x34, 0xff},
	{0x35, 0x03}, {0x00, 0x00}
	};

	#define ALI_MAX_PIO 4

	/* timing parameter registers for each drive */
	static struct { u8 reg1, reg2, reg3, reg4; } regTab[4] = {
	{0x03, 0x26, 0x04, 0x27}, /* drive 0 */
	{0x05, 0x28, 0x06, 0x29}, /* drive 1 */
	{0x2b, 0x30, 0x2c, 0x31}, /* drive 2 */
	{0x2d, 0x32, 0x2e, 0x33}, /* drive 3 */
	};

	static int basePort; /* base port address */
	static int regPort; /* port for register number */
	static int dataPort; /* port for register data */
	static u8 regOn; /* output to base port to access registers */
	static u8 regOff; /* output to base port to close registers */

	/------------------------------------------------------------------------/

	/*
	* Read a controller register.
	*/
	static inline u8 inReg (u8 reg)
	{
	outb_p(reg, regPort);
	return inb(dataPort);
	}

	/*
	* Write a controller register.
	*/
	static void outReg (u8 data, u8 reg)
	{
	outb_p(reg, regPort);
	outb_p(data, dataPort);
	}

	/*
	* Set PIO mode for the specified drive.
	* This function computes timing parameters
	* and sets controller registers accordingly.
	*/
	static void ali14xx_tune_drive (ide_drive_t *drive, u8 pio)
	{
	int driveNum;
	int time1, time2;
	u8 param1, param2, param3, param4;
	unsigned long flags;
	int bus_speed = system_bus_clock();

	pio = ide_get_best_pio_mode(drive, pio, ALI_MAX_PIO);

	/* calculate timing, according to PIO mode */
	time1 = ide_pio_cycle_time(drive, pio);
	time2 = ide_pio_timings[pio].active_time;
	param3 = param1 = (time2 * bus_speed + 999) / 1000;
	param4 = param2 = (time1 * bus_speed + 999) / 1000 - param1;
	if (pio < 3) {
	param3 += 8;
	param4 += 8;
	}
	printk(KERN_DEBUG "%s: PIO mode%d, t1=%dns, t2=%dns, cycles = %d+%d, %d+%d\n",
	drive->name, pio, time1, time2, param1, param2, param3, param4);

	/* stuff timing parameters into controller registers */
	driveNum = (HWIF(drive)->index << 1) + drive->select.b.unit;
	spin_lock_irqsave(&ide_lock, flags);
	outb_p(regOn, basePort);
	outReg(param1, regTab[driveNum].reg1);
	outReg(param2, regTab[driveNum].reg2);
	outReg(param3, regTab[driveNum].reg3);
	outReg(param4, regTab[driveNum].reg4);
	outb_p(regOff, basePort);
	spin_unlock_irqrestore(&ide_lock, flags);
	}

	/*
	* Auto-detect the IDE controller port.
	*/
	static int __init findPort (void)
	{
	int i;
	u8 t;
	unsigned long flags;

	local_irq_save(flags);
	for (i = 0; i < ALI_NUM_PORTS; ++i) {
	basePort = ports[i];
	regOff = inb(basePort);
	for (regOn = 0x30; regOn <= 0x33; ++regOn) {
	outb_p(regOn, basePort);
	if (inb(basePort) == regOn) {
	regPort = basePort + 4;
	dataPort = basePort + 8;
	t = inReg(0) & 0xf0;
	outb_p(regOff, basePort);
	local_irq_restore(flags);
	if (t != 0x50)
	return 0;
	return 1; /* success */
	}
	}
	outb_p(regOff, basePort);
	}
	local_irq_restore(flags);
	return 0;
	}

	/*
	* Initialize controller registers with default values.
	*/
	static int __init initRegisters (void) {
	RegInitializer *p;
	u8 t;
	unsigned long flags;

	local_irq_save(flags);
	outb_p(regOn, basePort);
	for (p = initData; p->reg != 0; ++p)
	outReg(p->data, p->reg);
	outb_p(0x01, regPort);
	t = inb(regPort) & 0x01;
	outb_p(regOff, basePort);
	local_irq_restore(flags);
	return t;
	}

	static int __init ali14xx_probe(void)
	{
	ide_hwif_t hwif, mate;

	printk(KERN_DEBUG "ali14xx: base=0x%03x, regOn=0x%02x.\n",
	basePort, regOn);

	/* initialize controller registers */
	if (!initRegisters()) {
	printk(KERN_ERR "ali14xx: Chip initialization failed.\n");
	return 1;
	}

	hwif = &ide_hwifs[0];
	mate = &ide_hwifs[1];

	hwif->chipset = ide_ali14xx;
	hwif->pio_mask = ATA_PIO4;
	hwif->tuneproc = &ali14xx_tune_drive;
	hwif->mate = mate;

	mate->chipset = ide_ali14xx;
	mate->pio_mask = ATA_PIO4;
	mate->tuneproc = &ali14xx_tune_drive;
	mate->mate = hwif;
	mate->channel = 1;

	probe_hwif_init(hwif);
	probe_hwif_init(mate);

	ide_proc_register_port(hwif);
	ide_proc_register_port(mate);

	return 0;
	}

	int probe_ali14xx = 0;

	module_param_named(probe, probe_ali14xx, bool, 0);
	MODULE_PARM_DESC(probe, "probe for ALI M14xx chipsets");

	/* Can be called directly from ide.c. */
	int __init ali14xx_init(void)
	{
	if (probe_ali14xx == 0)
	goto out;

	/* auto-detect IDE controller port */
	if (findPort()) {
	if (ali14xx_probe())
	return -ENODEV;
	return 0;
	}
	printk(KERN_ERR "ali14xx: not found.\n");
	out:
	return -ENODEV;
	}

	#ifdef MODULE
	module_init(ali14xx_init);
	#endif

	MODULE_AUTHOR("see local file");
	MODULE_DESCRIPTION("support of ALI 14XX IDE chipsets");
	MODULE_LICENSE("GPL");