| /****************************************************************************** |
| * |
| * Module Name: nsprepkg - Validation of package objects for predefined names |
| * |
| *****************************************************************************/ |
| |
| /* |
| * Copyright (C) 2000 - 2015, Intel Corp. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions, and the following disclaimer, |
| * without modification. |
| * 2. Redistributions in binary form must reproduce at minimum a disclaimer |
| * substantially similar to the "NO WARRANTY" disclaimer below |
| * ("Disclaimer") and any redistribution must be conditioned upon |
| * including a substantially similar Disclaimer requirement for further |
| * binary redistribution. |
| * 3. Neither the names of the above-listed copyright holders nor the names |
| * of any contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2 as published by the Free |
| * Software Foundation. |
| * |
| * NO WARRANTY |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGES. |
| */ |
| |
| #include <acpi/acpi.h> |
| #include "accommon.h" |
| #include "acnamesp.h" |
| #include "acpredef.h" |
| |
| #define _COMPONENT ACPI_NAMESPACE |
| ACPI_MODULE_NAME("nsprepkg") |
| |
| /* Local prototypes */ |
| static acpi_status |
| acpi_ns_check_package_list(struct acpi_evaluate_info *info, |
| const union acpi_predefined_info *package, |
| union acpi_operand_object **elements, u32 count); |
| |
| static acpi_status |
| acpi_ns_check_package_elements(struct acpi_evaluate_info *info, |
| union acpi_operand_object **elements, |
| u8 type1, |
| u32 count1, |
| u8 type2, u32 count2, u32 start_index); |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_ns_check_package |
| * |
| * PARAMETERS: info - Method execution information block |
| * return_object_ptr - Pointer to the object returned from the |
| * evaluation of a method or object |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Check a returned package object for the correct count and |
| * correct type of all sub-objects. |
| * |
| ******************************************************************************/ |
| |
| acpi_status |
| acpi_ns_check_package(struct acpi_evaluate_info *info, |
| union acpi_operand_object **return_object_ptr) |
| { |
| union acpi_operand_object *return_object = *return_object_ptr; |
| const union acpi_predefined_info *package; |
| union acpi_operand_object **elements; |
| acpi_status status = AE_OK; |
| u32 expected_count; |
| u32 count; |
| u32 i; |
| |
| ACPI_FUNCTION_NAME(ns_check_package); |
| |
| /* The package info for this name is in the next table entry */ |
| |
| package = info->predefined + 1; |
| |
| ACPI_DEBUG_PRINT((ACPI_DB_NAMES, |
| "%s Validating return Package of Type %X, Count %X\n", |
| info->full_pathname, package->ret_info.type, |
| return_object->package.count)); |
| |
| /* |
| * For variable-length Packages, we can safely remove all embedded |
| * and trailing NULL package elements |
| */ |
| acpi_ns_remove_null_elements(info, package->ret_info.type, |
| return_object); |
| |
| /* Extract package count and elements array */ |
| |
| elements = return_object->package.elements; |
| count = return_object->package.count; |
| |
| /* |
| * Most packages must have at least one element. The only exception |
| * is the variable-length package (ACPI_PTYPE1_VAR). |
| */ |
| if (!count) { |
| if (package->ret_info.type == ACPI_PTYPE1_VAR) { |
| return (AE_OK); |
| } |
| |
| ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname, |
| info->node_flags, |
| "Return Package has no elements (empty)")); |
| |
| return (AE_AML_OPERAND_VALUE); |
| } |
| |
| /* |
| * Decode the type of the expected package contents |
| * |
| * PTYPE1 packages contain no subpackages |
| * PTYPE2 packages contain subpackages |
| */ |
| switch (package->ret_info.type) { |
| case ACPI_PTYPE1_FIXED: |
| /* |
| * The package count is fixed and there are no subpackages |
| * |
| * If package is too small, exit. |
| * If package is larger than expected, issue warning but continue |
| */ |
| expected_count = |
| package->ret_info.count1 + package->ret_info.count2; |
| if (count < expected_count) { |
| goto package_too_small; |
| } else if (count > expected_count) { |
| ACPI_DEBUG_PRINT((ACPI_DB_REPAIR, |
| "%s: Return Package is larger than needed - " |
| "found %u, expected %u\n", |
| info->full_pathname, count, |
| expected_count)); |
| } |
| |
| /* Validate all elements of the returned package */ |
| |
| status = acpi_ns_check_package_elements(info, elements, |
| package->ret_info. |
| object_type1, |
| package->ret_info. |
| count1, |
| package->ret_info. |
| object_type2, |
| package->ret_info. |
| count2, 0); |
| break; |
| |
| case ACPI_PTYPE1_VAR: |
| /* |
| * The package count is variable, there are no subpackages, and all |
| * elements must be of the same type |
| */ |
| for (i = 0; i < count; i++) { |
| status = acpi_ns_check_object_type(info, elements, |
| package->ret_info. |
| object_type1, i); |
| if (ACPI_FAILURE(status)) { |
| return (status); |
| } |
| elements++; |
| } |
| break; |
| |
| case ACPI_PTYPE1_OPTION: |
| /* |
| * The package count is variable, there are no subpackages. There are |
| * a fixed number of required elements, and a variable number of |
| * optional elements. |
| * |
| * Check if package is at least as large as the minimum required |
| */ |
| expected_count = package->ret_info3.count; |
| if (count < expected_count) { |
| goto package_too_small; |
| } |
| |
| /* Variable number of sub-objects */ |
| |
| for (i = 0; i < count; i++) { |
| if (i < package->ret_info3.count) { |
| |
| /* These are the required package elements (0, 1, or 2) */ |
| |
| status = |
| acpi_ns_check_object_type(info, elements, |
| package-> |
| ret_info3. |
| object_type[i], |
| i); |
| if (ACPI_FAILURE(status)) { |
| return (status); |
| } |
| } else { |
| /* These are the optional package elements */ |
| |
| status = |
| acpi_ns_check_object_type(info, elements, |
| package-> |
| ret_info3. |
| tail_object_type, |
| i); |
| if (ACPI_FAILURE(status)) { |
| return (status); |
| } |
| } |
| elements++; |
| } |
| break; |
| |
| case ACPI_PTYPE2_REV_FIXED: |
| |
| /* First element is the (Integer) revision */ |
| |
| status = acpi_ns_check_object_type(info, elements, |
| ACPI_RTYPE_INTEGER, 0); |
| if (ACPI_FAILURE(status)) { |
| return (status); |
| } |
| |
| elements++; |
| count--; |
| |
| /* Examine the subpackages */ |
| |
| status = |
| acpi_ns_check_package_list(info, package, elements, count); |
| break; |
| |
| case ACPI_PTYPE2_PKG_COUNT: |
| |
| /* First element is the (Integer) count of subpackages to follow */ |
| |
| status = acpi_ns_check_object_type(info, elements, |
| ACPI_RTYPE_INTEGER, 0); |
| if (ACPI_FAILURE(status)) { |
| return (status); |
| } |
| |
| /* |
| * Count cannot be larger than the parent package length, but allow it |
| * to be smaller. The >= accounts for the Integer above. |
| */ |
| expected_count = (u32)(*elements)->integer.value; |
| if (expected_count >= count) { |
| goto package_too_small; |
| } |
| |
| count = expected_count; |
| elements++; |
| |
| /* Examine the subpackages */ |
| |
| status = |
| acpi_ns_check_package_list(info, package, elements, count); |
| break; |
| |
| case ACPI_PTYPE2: |
| case ACPI_PTYPE2_FIXED: |
| case ACPI_PTYPE2_MIN: |
| case ACPI_PTYPE2_COUNT: |
| case ACPI_PTYPE2_FIX_VAR: |
| /* |
| * These types all return a single Package that consists of a |
| * variable number of subpackages. |
| * |
| * First, ensure that the first element is a subpackage. If not, |
| * the BIOS may have incorrectly returned the object as a single |
| * package instead of a Package of Packages (a common error if |
| * there is only one entry). We may be able to repair this by |
| * wrapping the returned Package with a new outer Package. |
| */ |
| if (*elements |
| && ((*elements)->common.type != ACPI_TYPE_PACKAGE)) { |
| |
| /* Create the new outer package and populate it */ |
| |
| status = |
| acpi_ns_wrap_with_package(info, return_object, |
| return_object_ptr); |
| if (ACPI_FAILURE(status)) { |
| return (status); |
| } |
| |
| /* Update locals to point to the new package (of 1 element) */ |
| |
| return_object = *return_object_ptr; |
| elements = return_object->package.elements; |
| count = 1; |
| } |
| |
| /* Examine the subpackages */ |
| |
| status = |
| acpi_ns_check_package_list(info, package, elements, count); |
| break; |
| |
| case ACPI_PTYPE2_VAR_VAR: |
| /* |
| * Returns a variable list of packages, each with a variable list |
| * of objects. |
| */ |
| break; |
| |
| case ACPI_PTYPE2_UUID_PAIR: |
| |
| /* The package must contain pairs of (UUID + type) */ |
| |
| if (count & 1) { |
| expected_count = count + 1; |
| goto package_too_small; |
| } |
| |
| while (count > 0) { |
| status = acpi_ns_check_object_type(info, elements, |
| package->ret_info. |
| object_type1, 0); |
| if (ACPI_FAILURE(status)) { |
| return (status); |
| } |
| |
| /* Validate length of the UUID buffer */ |
| |
| if ((*elements)->buffer.length != 16) { |
| ACPI_WARN_PREDEFINED((AE_INFO, |
| info->full_pathname, |
| info->node_flags, |
| "Invalid length for UUID Buffer")); |
| return (AE_AML_OPERAND_VALUE); |
| } |
| |
| status = acpi_ns_check_object_type(info, elements + 1, |
| package->ret_info. |
| object_type2, 0); |
| if (ACPI_FAILURE(status)) { |
| return (status); |
| } |
| |
| elements += 2; |
| count -= 2; |
| } |
| break; |
| |
| default: |
| |
| /* Should not get here if predefined info table is correct */ |
| |
| ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname, |
| info->node_flags, |
| "Invalid internal return type in table entry: %X", |
| package->ret_info.type)); |
| |
| return (AE_AML_INTERNAL); |
| } |
| |
| return (status); |
| |
| package_too_small: |
| |
| /* Error exit for the case with an incorrect package count */ |
| |
| ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname, info->node_flags, |
| "Return Package is too small - found %u elements, expected %u", |
| count, expected_count)); |
| |
| return (AE_AML_OPERAND_VALUE); |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_ns_check_package_list |
| * |
| * PARAMETERS: info - Method execution information block |
| * package - Pointer to package-specific info for method |
| * elements - Element list of parent package. All elements |
| * of this list should be of type Package. |
| * count - Count of subpackages |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Examine a list of subpackages |
| * |
| ******************************************************************************/ |
| |
| static acpi_status |
| acpi_ns_check_package_list(struct acpi_evaluate_info *info, |
| const union acpi_predefined_info *package, |
| union acpi_operand_object **elements, u32 count) |
| { |
| union acpi_operand_object *sub_package; |
| union acpi_operand_object **sub_elements; |
| acpi_status status; |
| u32 expected_count; |
| u32 i; |
| u32 j; |
| |
| /* |
| * Validate each subpackage in the parent Package |
| * |
| * NOTE: assumes list of subpackages contains no NULL elements. |
| * Any NULL elements should have been removed by earlier call |
| * to acpi_ns_remove_null_elements. |
| */ |
| for (i = 0; i < count; i++) { |
| sub_package = *elements; |
| sub_elements = sub_package->package.elements; |
| info->parent_package = sub_package; |
| |
| /* Each sub-object must be of type Package */ |
| |
| status = acpi_ns_check_object_type(info, &sub_package, |
| ACPI_RTYPE_PACKAGE, i); |
| if (ACPI_FAILURE(status)) { |
| return (status); |
| } |
| |
| /* Examine the different types of expected subpackages */ |
| |
| info->parent_package = sub_package; |
| switch (package->ret_info.type) { |
| case ACPI_PTYPE2: |
| case ACPI_PTYPE2_PKG_COUNT: |
| case ACPI_PTYPE2_REV_FIXED: |
| |
| /* Each subpackage has a fixed number of elements */ |
| |
| expected_count = |
| package->ret_info.count1 + package->ret_info.count2; |
| if (sub_package->package.count < expected_count) { |
| goto package_too_small; |
| } |
| |
| status = |
| acpi_ns_check_package_elements(info, sub_elements, |
| package->ret_info. |
| object_type1, |
| package->ret_info. |
| count1, |
| package->ret_info. |
| object_type2, |
| package->ret_info. |
| count2, 0); |
| if (ACPI_FAILURE(status)) { |
| return (status); |
| } |
| break; |
| |
| case ACPI_PTYPE2_FIX_VAR: |
| /* |
| * Each subpackage has a fixed number of elements and an |
| * optional element |
| */ |
| expected_count = |
| package->ret_info.count1 + package->ret_info.count2; |
| if (sub_package->package.count < expected_count) { |
| goto package_too_small; |
| } |
| |
| status = |
| acpi_ns_check_package_elements(info, sub_elements, |
| package->ret_info. |
| object_type1, |
| package->ret_info. |
| count1, |
| package->ret_info. |
| object_type2, |
| sub_package->package. |
| count - |
| package->ret_info. |
| count1, 0); |
| if (ACPI_FAILURE(status)) { |
| return (status); |
| } |
| break; |
| |
| case ACPI_PTYPE2_VAR_VAR: |
| /* |
| * Each subpackage has a fixed or variable number of elements |
| */ |
| break; |
| |
| case ACPI_PTYPE2_FIXED: |
| |
| /* Each subpackage has a fixed length */ |
| |
| expected_count = package->ret_info2.count; |
| if (sub_package->package.count < expected_count) { |
| goto package_too_small; |
| } |
| |
| /* Check the type of each subpackage element */ |
| |
| for (j = 0; j < expected_count; j++) { |
| status = |
| acpi_ns_check_object_type(info, |
| &sub_elements[j], |
| package-> |
| ret_info2. |
| object_type[j], |
| j); |
| if (ACPI_FAILURE(status)) { |
| return (status); |
| } |
| } |
| break; |
| |
| case ACPI_PTYPE2_MIN: |
| |
| /* Each subpackage has a variable but minimum length */ |
| |
| expected_count = package->ret_info.count1; |
| if (sub_package->package.count < expected_count) { |
| goto package_too_small; |
| } |
| |
| /* Check the type of each subpackage element */ |
| |
| status = |
| acpi_ns_check_package_elements(info, sub_elements, |
| package->ret_info. |
| object_type1, |
| sub_package->package. |
| count, 0, 0, 0); |
| if (ACPI_FAILURE(status)) { |
| return (status); |
| } |
| break; |
| |
| case ACPI_PTYPE2_COUNT: |
| /* |
| * First element is the (Integer) count of elements, including |
| * the count field (the ACPI name is num_elements) |
| */ |
| status = acpi_ns_check_object_type(info, sub_elements, |
| ACPI_RTYPE_INTEGER, |
| 0); |
| if (ACPI_FAILURE(status)) { |
| return (status); |
| } |
| |
| /* |
| * Make sure package is large enough for the Count and is |
| * is as large as the minimum size |
| */ |
| expected_count = (u32)(*sub_elements)->integer.value; |
| if (sub_package->package.count < expected_count) { |
| goto package_too_small; |
| } |
| if (sub_package->package.count < |
| package->ret_info.count1) { |
| expected_count = package->ret_info.count1; |
| goto package_too_small; |
| } |
| if (expected_count == 0) { |
| /* |
| * Either the num_entries element was originally zero or it was |
| * a NULL element and repaired to an Integer of value zero. |
| * In either case, repair it by setting num_entries to be the |
| * actual size of the subpackage. |
| */ |
| expected_count = sub_package->package.count; |
| (*sub_elements)->integer.value = expected_count; |
| } |
| |
| /* Check the type of each subpackage element */ |
| |
| status = |
| acpi_ns_check_package_elements(info, |
| (sub_elements + 1), |
| package->ret_info. |
| object_type1, |
| (expected_count - 1), |
| 0, 0, 1); |
| if (ACPI_FAILURE(status)) { |
| return (status); |
| } |
| break; |
| |
| default: /* Should not get here, type was validated by caller */ |
| |
| return (AE_AML_INTERNAL); |
| } |
| |
| elements++; |
| } |
| |
| return (AE_OK); |
| |
| package_too_small: |
| |
| /* The subpackage count was smaller than required */ |
| |
| ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname, info->node_flags, |
| "Return SubPackage[%u] is too small - found %u elements, expected %u", |
| i, sub_package->package.count, expected_count)); |
| |
| return (AE_AML_OPERAND_VALUE); |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_ns_check_package_elements |
| * |
| * PARAMETERS: info - Method execution information block |
| * elements - Pointer to the package elements array |
| * type1 - Object type for first group |
| * count1 - Count for first group |
| * type2 - Object type for second group |
| * count2 - Count for second group |
| * start_index - Start of the first group of elements |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Check that all elements of a package are of the correct object |
| * type. Supports up to two groups of different object types. |
| * |
| ******************************************************************************/ |
| |
| static acpi_status |
| acpi_ns_check_package_elements(struct acpi_evaluate_info *info, |
| union acpi_operand_object **elements, |
| u8 type1, |
| u32 count1, |
| u8 type2, u32 count2, u32 start_index) |
| { |
| union acpi_operand_object **this_element = elements; |
| acpi_status status; |
| u32 i; |
| |
| /* |
| * Up to two groups of package elements are supported by the data |
| * structure. All elements in each group must be of the same type. |
| * The second group can have a count of zero. |
| */ |
| for (i = 0; i < count1; i++) { |
| status = acpi_ns_check_object_type(info, this_element, |
| type1, i + start_index); |
| if (ACPI_FAILURE(status)) { |
| return (status); |
| } |
| this_element++; |
| } |
| |
| for (i = 0; i < count2; i++) { |
| status = acpi_ns_check_object_type(info, this_element, |
| type2, |
| (i + count1 + start_index)); |
| if (ACPI_FAILURE(status)) { |
| return (status); |
| } |
| this_element++; |
| } |
| |
| return (AE_OK); |
| } |