Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (26 commits)
V4L/DVB (6548): pvrusb2: Fix oops on module removal
V4L/DVB (6547): V4L: remove PCI from VIDEO_VIVI depends
V4L/DVB (6532): Add the remaining addresses for tda9887
V4L/DVB (6531): Fix a regression caused by commit 153962364dc6fa4a24571885fbe76506d8968610
V4L/DVB (6518): Fix tvp5150 default values
V4L/DVB (6514): em28xx: Include linux/mm.h
V4L/DVB (6506): saa7134-alsa: Fix mmap support
V4L/DVB (6504): pvrusb2: Remove dead sysfs code
V4L/DVB (6503): pvrusb2: Fix associativity logic error
V4L/DVB (6501): stv0297: Signal strength fixes
V4L/DVB (6500): tda10021: Fix reported signal strength
V4L/DVB (6499): tda10021: Bit error counting fixed
V4L/DVB (6498): ves1820: Change the acquisition range for clock recovery from 120 ppm to 240ppm
V4L/DVB (6495): saa7146: saa7146_wait_for_debi_done fixes
V4L/DVB (6479): use input functions, should depend on INPUT
V4L/DVB (6478): ir-functions use input functions, should depend on INPUT
V4L/DVB (6432): tuner: fix CONFIG_TUNER_TEA5761=m
V4L/DVB (6407): planb: fix obvious interrupt handling bugs
V4L/DVB (6406): saa7134: fix analog audio in on medion md8800 quadro
V4L/DVB (6403): mt2131: replace comma with semicolon fix
...
diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx
index a302668..37f0e3c 100644
--- a/Documentation/video4linux/CARDLIST.em28xx
+++ b/Documentation/video4linux/CARDLIST.em28xx
@@ -8,4 +8,7 @@
7 -> Leadtek Winfast USB II (em2800)
8 -> Kworld USB2800 (em2800)
9 -> Pinnacle Dazzle DVC 90 (em2820/em2840) [2304:0207]
+ 10 -> Hauppauge WinTV HVR 900 (em2880)
+ 11 -> Terratec Hybrid XS (em2880)
12 -> Kworld PVR TV 2800 RF (em2820/em2840)
+ 13 -> Terratec Prodigy XS (em2880)
diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig
index dd9bd43..1604f04 100644
--- a/drivers/media/Kconfig
+++ b/drivers/media/Kconfig
@@ -151,6 +151,7 @@
config VIDEO_IR
tristate
+ depends on INPUT
select VIDEO_IR_I2C if I2C
config VIDEO_TVEEPROM
diff --git a/drivers/media/common/saa7146_core.c b/drivers/media/common/saa7146_core.c
index cb034ea..7d04a6f 100644
--- a/drivers/media/common/saa7146_core.c
+++ b/drivers/media/common/saa7146_core.c
@@ -59,43 +59,89 @@
}
/* This DEBI code is based on the saa7146 Stradis driver by Nathan Laredo */
-int saa7146_wait_for_debi_done(struct saa7146_dev *dev, int nobusyloop)
+static inline int saa7146_wait_for_debi_done_sleep(struct saa7146_dev *dev,
+ unsigned long us1, unsigned long us2)
{
- unsigned long start;
+ unsigned long timeout;
int err;
/* wait for registers to be programmed */
- start = jiffies;
+ timeout = jiffies + usecs_to_jiffies(us1);
while (1) {
- err = time_after(jiffies, start + HZ/20);
+ err = time_after(jiffies, timeout);
if (saa7146_read(dev, MC2) & 2)
break;
if (err) {
- DEB_S(("timed out while waiting for registers getting programmed\n"));
+ printk(KERN_ERR "%s: %s timed out while waiting for "
+ "registers getting programmed\n",
+ dev->name, __FUNCTION__);
return -ETIMEDOUT;
}
- if (nobusyloop)
- msleep(1);
+ msleep(1);
}
/* wait for transfer to complete */
- start = jiffies;
+ timeout = jiffies + usecs_to_jiffies(us2);
while (1) {
- err = time_after(jiffies, start + HZ/4);
+ err = time_after(jiffies, timeout);
if (!(saa7146_read(dev, PSR) & SPCI_DEBI_S))
break;
saa7146_read(dev, MC2);
if (err) {
- DEB_S(("timed out while waiting for transfer completion\n"));
+ DEB_S(("%s: %s timed out while waiting for transfer "
+ "completion\n", dev->name, __FUNCTION__));
return -ETIMEDOUT;
}
- if (nobusyloop)
- msleep(1);
+ msleep(1);
}
return 0;
}
+static inline int saa7146_wait_for_debi_done_busyloop(struct saa7146_dev *dev,
+ unsigned long us1, unsigned long us2)
+{
+ unsigned long loops;
+
+ /* wait for registers to be programmed */
+ loops = us1;
+ while (1) {
+ if (saa7146_read(dev, MC2) & 2)
+ break;
+ if (!loops--) {
+ printk(KERN_ERR "%s: %s timed out while waiting for "
+ "registers getting programmed\n",
+ dev->name, __FUNCTION__);
+ return -ETIMEDOUT;
+ }
+ udelay(1);
+ }
+
+ /* wait for transfer to complete */
+ loops = us2 / 5;
+ while (1) {
+ if (!(saa7146_read(dev, PSR) & SPCI_DEBI_S))
+ break;
+ saa7146_read(dev, MC2);
+ if (!loops--) {
+ DEB_S(("%s: %s timed out while waiting for transfer "
+ "completion\n", dev->name, __FUNCTION__));
+ return -ETIMEDOUT;
+ }
+ udelay(5);
+ }
+
+ return 0;
+}
+
+int saa7146_wait_for_debi_done(struct saa7146_dev *dev, int nobusyloop)
+{
+ if (nobusyloop)
+ return saa7146_wait_for_debi_done_sleep(dev, 50000, 250000);
+ else
+ return saa7146_wait_for_debi_done_busyloop(dev, 50000, 250000);
+}
+
/****************************************************************************
* general helper functions
****************************************************************************/
diff --git a/drivers/media/dvb/frontends/mt2131.c b/drivers/media/dvb/frontends/mt2131.c
index 4b93931..13cf166 100644
--- a/drivers/media/dvb/frontends/mt2131.c
+++ b/drivers/media/dvb/frontends/mt2131.c
@@ -116,7 +116,7 @@
f_lo1 = (f_lo1 / 250) * 250;
f_lo2 = f_lo1 - freq - MT2131_IF2;
- priv->frequency = (f_lo1 - f_lo2 - MT2131_IF2) * 1000,
+ priv->frequency = (f_lo1 - f_lo2 - MT2131_IF2) * 1000;
/* Frequency LO1 = 16MHz * (DIV1 + NUM1/8192 ) */
num1 = f_lo1 * 64 / (MT2131_FREF / 128);
diff --git a/drivers/media/dvb/frontends/s5h1409.c b/drivers/media/dvb/frontends/s5h1409.c
index 30e8a70..8dee7ec 100644
--- a/drivers/media/dvb/frontends/s5h1409.c
+++ b/drivers/media/dvb/frontends/s5h1409.c
@@ -42,6 +42,9 @@
fe_modulation_t current_modulation;
u32 current_frequency;
+
+ u32 is_qam_locked;
+ u32 qam_state;
};
static int debug = 0;
@@ -94,6 +97,7 @@
{ 0xac, 0x1003, },
{ 0xad, 0x103f, },
{ 0xe2, 0x0100, },
+ { 0xe3, 0x0000, },
{ 0x28, 0x1010, },
{ 0xb1, 0x000e, },
};
@@ -335,6 +339,8 @@
s5h1409_writereg(state, 0xf5, 0);
s5h1409_writereg(state, 0xf5, 1);
+ state->is_qam_locked = 0;
+ state->qam_state = 0;
return 0;
}
@@ -349,6 +355,11 @@
s5h1409_writereg(state, 0x87, 0x01be);
s5h1409_writereg(state, 0x88, 0x0436);
s5h1409_writereg(state, 0x89, 0x054d);
+ } else
+ if (KHz == 4000) {
+ s5h1409_writereg(state, 0x87, 0x014b);
+ s5h1409_writereg(state, 0x88, 0x0cb5);
+ s5h1409_writereg(state, 0x89, 0x03e2);
} else {
printk("%s() Invalid arg = %d KHz\n", __FUNCTION__, KHz);
ret = -1;
@@ -361,7 +372,7 @@
{
struct s5h1409_state* state = fe->demodulator_priv;
- dprintk("%s()\n", __FUNCTION__);
+ dprintk("%s(%d)\n", __FUNCTION__, inverted);
if(inverted == 1)
return s5h1409_writereg(state, 0x1b, 0x1101); /* Inverted */
@@ -382,14 +393,10 @@
s5h1409_writereg(state, 0xf4, 0);
break;
case QAM_64:
- dprintk("%s() QAM_64\n", __FUNCTION__);
- s5h1409_writereg(state, 0xf4, 1);
- s5h1409_writereg(state, 0x85, 0x100);
- break;
case QAM_256:
- dprintk("%s() QAM_256\n", __FUNCTION__);
+ dprintk("%s() QAM_AUTO (64/256)\n", __FUNCTION__);
s5h1409_writereg(state, 0xf4, 1);
- s5h1409_writereg(state, 0x85, 0x101);
+ s5h1409_writereg(state, 0x85, 0x110);
break;
default:
dprintk("%s() Invalid modulation\n", __FUNCTION__);
@@ -423,7 +430,7 @@
if (enable)
return s5h1409_writereg(state, 0xe3, 0x1100);
else
- return s5h1409_writereg(state, 0xe3, 0);
+ return s5h1409_writereg(state, 0xe3, 0x1000);
}
static int s5h1409_sleep(struct dvb_frontend* fe, int enable)
@@ -444,6 +451,66 @@
return s5h1409_writereg(state, 0xfa, 0);
}
+static void s5h1409_set_qam_amhum_mode(struct dvb_frontend *fe)
+{
+ struct s5h1409_state *state = fe->demodulator_priv;
+ u16 reg;
+
+ if (state->is_qam_locked)
+ return;
+
+ /* QAM EQ lock check */
+ reg = s5h1409_readreg(state, 0xf0);
+
+ if ((reg >> 13) & 0x1) {
+
+ state->is_qam_locked = 1;
+ reg &= 0xff;
+
+ s5h1409_writereg(state, 0x96, 0x00c);
+ if ((reg < 0x38) || (reg > 0x68) ) {
+ s5h1409_writereg(state, 0x93, 0x3332);
+ s5h1409_writereg(state, 0x9e, 0x2c37);
+ } else {
+ s5h1409_writereg(state, 0x93, 0x3130);
+ s5h1409_writereg(state, 0x9e, 0x2836);
+ }
+
+ } else {
+ s5h1409_writereg(state, 0x96, 0x0008);
+ s5h1409_writereg(state, 0x93, 0x3332);
+ s5h1409_writereg(state, 0x9e, 0x2c37);
+ }
+}
+
+static void s5h1409_set_qam_interleave_mode(struct dvb_frontend *fe)
+{
+ struct s5h1409_state *state = fe->demodulator_priv;
+ u16 reg, reg1, reg2;
+
+ reg = s5h1409_readreg(state, 0xf1);
+
+ /* Master lock */
+ if ((reg >> 15) & 0x1) {
+ if (state->qam_state != 2) {
+ state->qam_state = 2;
+ reg1 = s5h1409_readreg(state, 0xb2);
+ reg2 = s5h1409_readreg(state, 0xad);
+
+ s5h1409_writereg(state, 0x96, 0x20);
+ s5h1409_writereg(state, 0xad,
+ ( ((reg1 & 0xf000) >> 4) | (reg2 & 0xf0ff)) );
+ s5h1409_writereg(state, 0xab, 0x1100);
+ }
+ } else {
+ if (state->qam_state != 1) {
+ state->qam_state = 1;
+ s5h1409_writereg(state, 0x96, 0x08);
+ s5h1409_writereg(state, 0xab, 0x1101);
+ }
+ }
+}
+
/* Talk to the demod, set the FEC, GUARD, QAM settings etc */
static int s5h1409_set_frontend (struct dvb_frontend* fe,
struct dvb_frontend_parameters *p)
@@ -458,12 +525,21 @@
s5h1409_enable_modulation(fe, p->u.vsb.modulation);
+ /* Allow the demod to settle */
+ msleep(100);
+
if (fe->ops.tuner_ops.set_params) {
if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1);
fe->ops.tuner_ops.set_params(fe, p);
if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
}
+ /* Optimize the demod for QAM */
+ if (p->u.vsb.modulation != VSB_8) {
+ s5h1409_set_qam_amhum_mode(fe);
+ s5h1409_set_qam_interleave_mode(fe);
+ }
+
return 0;
}
@@ -495,8 +571,8 @@
s5h1409_set_gpio(fe, state->config->gpio);
s5h1409_softreset(fe);
- /* Note: Leaving the I2C gate open here. */
- s5h1409_i2c_gate_ctrl(fe, 1);
+ /* Note: Leaving the I2C gate closed. */
+ s5h1409_i2c_gate_ctrl(fe, 0);
return 0;
}
diff --git a/drivers/media/dvb/frontends/stv0297.c b/drivers/media/dvb/frontends/stv0297.c
index 17e5cb5..7c23775 100644
--- a/drivers/media/dvb/frontends/stv0297.c
+++ b/drivers/media/dvb/frontends/stv0297.c
@@ -358,11 +358,23 @@
static int stv0297_read_signal_strength(struct dvb_frontend *fe, u16 * strength)
{
struct stv0297_state *state = fe->demodulator_priv;
- u8 STRENGTH[2];
+ u8 STRENGTH[3];
+ u16 tmp;
- stv0297_readregs(state, 0x41, STRENGTH, 2);
- *strength = (STRENGTH[1] & 0x03) << 8 | STRENGTH[0];
-
+ stv0297_readregs(state, 0x41, STRENGTH, 3);
+ tmp = (STRENGTH[1] & 0x03) << 8 | STRENGTH[0];
+ if (STRENGTH[2] & 0x20) {
+ if (tmp < 0x200)
+ tmp = 0;
+ else
+ tmp = tmp - 0x200;
+ } else {
+ if (tmp > 0x1ff)
+ tmp = 0;
+ else
+ tmp = 0x1ff - tmp;
+ }
+ *strength = (tmp << 7) | (tmp >> 2);
return 0;
}
diff --git a/drivers/media/dvb/frontends/tda10021.c b/drivers/media/dvb/frontends/tda10021.c
index 4cd9e82..45137d2 100644
--- a/drivers/media/dvb/frontends/tda10021.c
+++ b/drivers/media/dvb/frontends/tda10021.c
@@ -301,6 +301,8 @@
u32 _ber = tda10021_readreg(state, 0x14) |
(tda10021_readreg(state, 0x15) << 8) |
((tda10021_readreg(state, 0x16) & 0x0f) << 16);
+ _tda10021_writereg(state, 0x10, (tda10021_readreg(state, 0x10) & ~0xc0)
+ | (tda10021_inittab[0x10] & 0xc0));
*ber = 10 * _ber;
return 0;
@@ -310,7 +312,11 @@
{
struct tda10021_state* state = fe->demodulator_priv;
+ u8 config = tda10021_readreg(state, 0x02);
u8 gain = tda10021_readreg(state, 0x17);
+ if (config & 0x02)
+ /* the agc value is inverted */
+ gain = ~gain;
*strength = (gain << 8) | gain;
return 0;
diff --git a/drivers/media/dvb/frontends/ves1820.c b/drivers/media/dvb/frontends/ves1820.c
index 066b73b..60433b5 100644
--- a/drivers/media/dvb/frontends/ves1820.c
+++ b/drivers/media/dvb/frontends/ves1820.c
@@ -47,7 +47,7 @@
static int verbose;
static u8 ves1820_inittab[] = {
- 0x69, 0x6A, 0x93, 0x12, 0x12, 0x46, 0x26, 0x1A,
+ 0x69, 0x6A, 0x93, 0x1A, 0x12, 0x46, 0x26, 0x1A,
0x43, 0x6A, 0xAA, 0xAA, 0x1E, 0x85, 0x43, 0x20,
0xE0, 0x00, 0xA1, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00,
diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig
index 6d53289..54b91f2 100644
--- a/drivers/media/dvb/ttpci/Kconfig
+++ b/drivers/media/dvb/ttpci/Kconfig
@@ -84,7 +84,7 @@
config DVB_BUDGET_CI
tristate "Budget cards with onboard CI connector"
- depends on DVB_CORE && PCI && I2C && VIDEO_V4L1
+ depends on DVB_CORE && PCI && I2C && VIDEO_V4L1 && INPUT
select VIDEO_SAA7146
select DVB_STV0297 if !DVB_FE_CUSTOMISE
select DVB_STV0299 if !DVB_FE_CUSTOMISE
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 2e571eb..c9f14bfc 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -363,7 +363,7 @@
config VIDEO_VIVI
tristate "Virtual Video Driver"
- depends on VIDEO_V4L2 && !SPARC32 && !SPARC64 && PCI
+ depends on VIDEO_V4L2 && !SPARC32 && !SPARC64
select VIDEOBUF_VMALLOC
default n
---help---
diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index 9feeb636..a88b56e 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -2881,10 +2881,6 @@
if (NULL == fmt)
return -EINVAL;
mutex_lock(&fh->cap.lock);
- if (fmt->depth != pic->depth) {
- retval = -EINVAL;
- goto fh_unlock_and_return;
- }
if (fmt->flags & FORMAT_FLAGS_RAW) {
/* VIDIOCMCAPTURE uses gbufsize, not RAW_BPL *
RAW_LINES * 2. F1 is stored at offset 0, F2
@@ -3117,6 +3113,8 @@
vm->width,vm->height,field);
if (0 != retval)
goto fh_unlock_and_return;
+ btv->init.width = vm->width;
+ btv->init.height = vm->height;
spin_lock_irqsave(&btv->s_lock,flags);
buffer_queue(&fh->cap,&buf->vb);
spin_unlock_irqrestore(&btv->s_lock,flags);
diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c
index b63cab3..7ae499c 100644
--- a/drivers/media/video/cafe_ccic.c
+++ b/drivers/media/video/cafe_ccic.c
@@ -3,6 +3,9 @@
* multifunction chip. Currently works with the Omnivision OV7670
* sensor.
*
+ * The data sheet for this device can be found at:
+ * http://www.marvell.com/products/pcconn/88ALP01.jsp
+ *
* Copyright 2006 One Laptop Per Child Association, Inc.
* Copyright 2006-7 Jonathan Corbet <corbet@lwn.net>
*
@@ -2232,13 +2235,16 @@
{
struct cafe_camera *cam = cafe_find_by_pdev(pdev);
int ret;
+ enum cafe_state cstate;
ret = pci_save_state(pdev);
if (ret)
return ret;
+ cstate = cam->state; /* HACK - stop_dma sets to idle */
cafe_ctlr_stop_dma(cam);
cafe_ctlr_power_down(cam);
pci_disable_device(pdev);
+ cam->state = cstate;
return 0;
}
diff --git a/drivers/media/video/cx23885/Kconfig b/drivers/media/video/cx23885/Kconfig
index 72004a0..d8b1ccb 100644
--- a/drivers/media/video/cx23885/Kconfig
+++ b/drivers/media/video/cx23885/Kconfig
@@ -1,6 +1,6 @@
config VIDEO_CX23885
tristate "Conexant cx23885 (2388x successor) support"
- depends on DVB_CORE && VIDEO_DEV && PCI && I2C
+ depends on DVB_CORE && VIDEO_DEV && PCI && I2C && INPUT
select I2C_ALGOBIT
select FW_LOADER
select VIDEO_BTCX
diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig
index eeb5224..ceb31d4 100644
--- a/drivers/media/video/cx88/Kconfig
+++ b/drivers/media/video/cx88/Kconfig
@@ -1,6 +1,6 @@
config VIDEO_CX88
tristate "Conexant 2388x (bt878 successor) support"
- depends on VIDEO_DEV && PCI && I2C
+ depends on VIDEO_DEV && PCI && I2C && INPUT
select I2C_ALGOBIT
select FW_LOADER
select VIDEO_BTCX
diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/video/em28xx/Kconfig
index 5b6a403..c112780 100644
--- a/drivers/media/video/em28xx/Kconfig
+++ b/drivers/media/video/em28xx/Kconfig
@@ -1,6 +1,6 @@
config VIDEO_EM28XX
tristate "Empia EM2800/2820/2840 USB video capture support"
- depends on VIDEO_V4L1 && I2C
+ depends on VIDEO_V4L1 && I2C && INPUT
select VIDEO_TUNER
select VIDEO_TVEEPROM
select VIDEO_IR
diff --git a/drivers/media/video/em28xx/em28xx-i2c.c b/drivers/media/video/em28xx/em28xx-i2c.c
index 997d067..e3a4aa7 100644
--- a/drivers/media/video/em28xx/em28xx-i2c.c
+++ b/drivers/media/video/em28xx/em28xx-i2c.c
@@ -416,8 +416,10 @@
struct em28xx *dev = client->adapter->algo_data;
switch (client->addr << 1) {
- case 0x43:
- case 0x4b:
+ case 0x86:
+ case 0x84:
+ case 0x96:
+ case 0x94:
{
struct tuner_setup tun_setup;
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index a4c2a90..2529c29 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -32,6 +32,7 @@
#include <linux/usb.h>
#include <linux/i2c.h>
#include <linux/version.h>
+#include <linux/mm.h>
#include <linux/video_decoder.h>
#include <linux/mutex.h>
diff --git a/drivers/media/video/planb.c b/drivers/media/video/planb.c
index ce4b2f9..36047d4 100644
--- a/drivers/media/video/planb.c
+++ b/drivers/media/video/planb.c
@@ -91,7 +91,6 @@
static int planb_ioctl(struct video_device *, unsigned int, void *);
static int planb_init_done(struct video_device *);
static int planb_mmap(struct video_device *, const char *, unsigned long);
-static void planb_irq(int, void *);
static void release_planb(void);
int init_planbs(struct video_init *);
@@ -1315,7 +1314,7 @@
return c1;
}
-static void planb_irq(int irq, void *dev_id)
+static irqreturn_t planb_irq(int irq, void *dev_id)
{
unsigned int stat, astat;
struct planb *pb = (struct planb *)dev_id;
@@ -1358,13 +1357,14 @@
pb->frame_stat[fr] = GBUFFER_DONE;
pb->grabbing--;
wake_up_interruptible(&pb->capq);
- return;
+ return IRQ_HANDLED;
}
/* incorrect interrupts? */
pb->intr_mask = PLANB_CLR_IRQ;
out_le32(&pb->planb_base->intr_stat, PLANB_CLR_IRQ);
printk(KERN_ERR "PlanB: IRQ lockup, cleared intrrupts"
" unconditionally\n");
+ return IRQ_HANDLED;
}
/*******************************
@@ -2090,7 +2090,7 @@
/* clear interrupt mask */
pb->intr_mask = PLANB_CLR_IRQ;
- result = request_irq(pb->irq, planb_irq, 0, "PlanB", (void *)pb);
+ result = request_irq(pb->irq, planb_irq, 0, "PlanB", pb);
if (result < 0) {
if (result==-EINVAL)
printk(KERN_ERR "PlanB: Bad irq number (%d) "
diff --git a/drivers/media/video/pvrusb2/pvrusb2-ctrl.c b/drivers/media/video/pvrusb2/pvrusb2-ctrl.c
index f569b00..46f156f 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-ctrl.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-ctrl.c
@@ -410,7 +410,7 @@
int msk;
*valptr = 0;
for (idx = 0, msk = 1; valid_bits; idx++, msk <<= 1) {
- if (!msk & valid_bits) continue;
+ if (!(msk & valid_bits)) continue;
valid_bits &= ~msk;
if (!names[idx]) continue;
slen = strlen(names[idx]);
diff --git a/drivers/media/video/pvrusb2/pvrusb2-main.c b/drivers/media/video/pvrusb2/pvrusb2-main.c
index ca9e278..11b3b2e 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-main.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-main.c
@@ -136,14 +136,13 @@
static void __exit pvr_exit(void)
{
-
pvr2_trace(PVR2_TRACE_INIT,"pvr_exit");
+ usb_deregister(&pvr_driver);
+
#ifdef CONFIG_VIDEO_PVRUSB2_SYSFS
pvr2_sysfs_class_destroy(class_ptr);
#endif /* CONFIG_VIDEO_PVRUSB2_SYSFS */
-
- usb_deregister(&pvr_driver);
}
module_init(pvr_init);
diff --git a/drivers/media/video/pvrusb2/pvrusb2-sysfs.c b/drivers/media/video/pvrusb2/pvrusb2-sysfs.c
index 2ee3c30..3c57a7d 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-sysfs.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-sysfs.c
@@ -905,13 +905,6 @@
}
-static int pvr2_sysfs_hotplug(struct device *d,
- struct kobj_uevent_env *env)
-{
- /* Even though we don't do anything here, we still need this function
- because sysfs will still try to call it. */
- return 0;
-}
struct pvr2_sysfs_class *pvr2_sysfs_class_create(void)
{
@@ -922,7 +915,6 @@
clp->class.name = "pvrusb2";
clp->class.class_release = pvr2_sysfs_class_release;
clp->class.dev_release = pvr2_sysfs_release;
- clp->class.dev_uevent = pvr2_sysfs_hotplug;
if (class_register(&clp->class)) {
pvr2_sysfs_trace(
"Registration failed for pvr2_sysfs_class id=%p",clp);
diff --git a/drivers/media/video/saa7134/Kconfig b/drivers/media/video/saa7134/Kconfig
index d6d8d66..3aa8cb2 100644
--- a/drivers/media/video/saa7134/Kconfig
+++ b/drivers/media/video/saa7134/Kconfig
@@ -1,6 +1,6 @@
config VIDEO_SAA7134
tristate "Philips SAA7134 support"
- depends on VIDEO_DEV && PCI && I2C
+ depends on VIDEO_DEV && PCI && I2C && INPUT
select VIDEOBUF_DMA_SG
select VIDEO_IR
select VIDEO_TUNER
diff --git a/drivers/media/video/saa7134/saa7134-alsa.c b/drivers/media/video/saa7134/saa7134-alsa.c
index c6f7279..b9c5cf7 100644
--- a/drivers/media/video/saa7134/saa7134-alsa.c
+++ b/drivers/media/video/saa7134/saa7134-alsa.c
@@ -543,8 +543,10 @@
V4L functions, and force ALSA to use that as the DMA area */
substream->runtime->dma_area = dev->dmasound.dma.vmalloc;
+ substream->runtime->dma_bytes = dev->dmasound.bufsize;
+ substream->runtime->dma_addr = 0;
- return 1;
+ return 0;
}
@@ -652,6 +654,17 @@
}
/*
+ * page callback (needed for mmap)
+ */
+
+static struct page *snd_card_saa7134_page(struct snd_pcm_substream *substream,
+ unsigned long offset)
+{
+ void *pageptr = substream->runtime->dma_area + offset;
+ return vmalloc_to_page(pageptr);
+}
+
+/*
* ALSA capture callbacks definition
*/
@@ -664,6 +677,7 @@
.prepare = snd_card_saa7134_capture_prepare,
.trigger = snd_card_saa7134_capture_trigger,
.pointer = snd_card_saa7134_capture_pointer,
+ .page = snd_card_saa7134_page,
};
/*
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index a4c192f..4f3dad9 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -2996,11 +2996,11 @@
},{
.name = name_comp1,
.vmux = 0,
- .amux = LINE2,
+ .amux = LINE1,
},{
.name = name_svideo,
.vmux = 8,
- .amux = LINE2,
+ .amux = LINE1,
}},
},
[SAA7134_BOARD_FLYDVBS_LR300] = {
diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index 6a77760..9e99f363 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -30,7 +30,7 @@
/* standard i2c insmod options */
static unsigned short normal_i2c[] = {
-#ifdef CONFIG_TUNER_TEA5761
+#if defined(CONFIG_TUNER_TEA5761) || (defined(CONFIG_TUNER_TEA5761_MODULE) && defined(MODULE))
0x10,
#endif
0x42, 0x43, 0x4a, 0x4b, /* tda8290 */
@@ -292,7 +292,6 @@
}
t->mode_mask = T_RADIO;
break;
-#ifdef CONFIG_TUNER_TEA5761
case TUNER_TEA5761:
if (tea5761_attach(&t->fe, t->i2c.adapter, t->i2c.addr) == NULL) {
t->type = TUNER_ABSENT;
@@ -301,7 +300,6 @@
}
t->mode_mask = T_RADIO;
break;
-#endif
case TUNER_PHILIPS_FMD1216ME_MK3:
buffer[0] = 0x0b;
buffer[1] = 0xdc;
@@ -594,7 +592,6 @@
/* autodetection code based on the i2c addr */
if (!no_autodetect) {
switch (addr) {
-#ifdef CONFIG_TUNER_TEA5761
case 0x10:
if (tea5761_autodetection(t->i2c.adapter, t->i2c.addr) != EINVAL) {
t->type = TUNER_TEA5761;
@@ -606,7 +603,6 @@
goto register_client;
}
break;
-#endif
case 0x42:
case 0x43:
case 0x4a:
diff --git a/drivers/media/video/tvp5150.c b/drivers/media/video/tvp5150.c
index e2f1c97..25d0aef 100644
--- a/drivers/media/video/tvp5150.c
+++ b/drivers/media/video/tvp5150.c
@@ -799,10 +799,10 @@
tvp5150_write_inittab(c, tvp5150_init_enable);
/* Initialize image preferences */
- tvp5150_write(c, TVP5150_BRIGHT_CTL, decoder->bright >> 8);
- tvp5150_write(c, TVP5150_CONTRAST_CTL, decoder->contrast >> 8);
- tvp5150_write(c, TVP5150_SATURATION_CTL, decoder->contrast >> 8);
- tvp5150_write(c, TVP5150_HUE_CTL, (decoder->hue - 32768) >> 8);
+ tvp5150_write(c, TVP5150_BRIGHT_CTL, decoder->bright);
+ tvp5150_write(c, TVP5150_CONTRAST_CTL, decoder->contrast);
+ tvp5150_write(c, TVP5150_SATURATION_CTL, decoder->contrast);
+ tvp5150_write(c, TVP5150_HUE_CTL, decoder->hue);
tvp5150_set_std(c, decoder->norm);
};
@@ -1077,10 +1077,10 @@
core->norm = V4L2_STD_ALL; /* Default is autodetect */
core->route.input = TVP5150_COMPOSITE1;
core->enable = 1;
- core->bright = 32768;
- core->contrast = 32768;
- core->hue = 32768;
- core->sat = 32768;
+ core->bright = 128;
+ core->contrast = 128;
+ core->hue = 0;
+ core->sat = 128;
if (rv) {
kfree(c);