| /* |
| * IEEE802.15.4-2003 specification |
| * |
| * Copyright (C) 2007-2012 Siemens AG |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 |
| * as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. |
| */ |
| #ifndef NET_MAC802154_H |
| #define NET_MAC802154_H |
| |
| #include <net/af_ieee802154.h> |
| |
| /* General MAC frame format: |
| * 2 bytes: Frame Control |
| * 1 byte: Sequence Number |
| * 20 bytes: Addressing fields |
| * 14 bytes: Auxiliary Security Header |
| */ |
| #define MAC802154_FRAME_HARD_HEADER_LEN (2 + 1 + 20 + 14) |
| |
| /* The following flags are used to indicate changed address settings from |
| * the stack to the hardware. |
| */ |
| |
| /* indicates that the Short Address changed */ |
| #define IEEE802515_AFILT_SADDR_CHANGED 0x00000001 |
| /* indicates that the IEEE Address changed */ |
| #define IEEE802515_AFILT_IEEEADDR_CHANGED 0x00000002 |
| /* indicates that the PAN ID changed */ |
| #define IEEE802515_AFILT_PANID_CHANGED 0x00000004 |
| /* indicates that PAN Coordinator status changed */ |
| #define IEEE802515_AFILT_PANC_CHANGED 0x00000008 |
| |
| struct ieee802154_hw_addr_filt { |
| __le16 pan_id; /* Each independent PAN selects a unique |
| * identifier. This PAN id allows communication |
| * between devices within a network using short |
| * addresses and enables transmissions between |
| * devices across independent networks. |
| */ |
| __le16 short_addr; |
| u8 ieee_addr[IEEE802154_ADDR_LEN]; |
| u8 pan_coord; |
| }; |
| |
| struct ieee802154_dev { |
| /* filled by the driver */ |
| int extra_tx_headroom; |
| u32 flags; |
| struct device *parent; |
| |
| /* filled by mac802154 core */ |
| struct ieee802154_hw_addr_filt hw_filt; |
| void *priv; |
| struct wpan_phy *phy; |
| }; |
| |
| /* Checksum is in hardware and is omitted from a packet |
| * |
| * These following flags are used to indicate hardware capabilities to |
| * the stack. Generally, flags here should have their meaning |
| * done in a way that the simplest hardware doesn't need setting |
| * any particular flags. There are some exceptions to this rule, |
| * however, so you are advised to review these flags carefully. |
| */ |
| |
| /* Indicates that receiver omits FCS and xmitter will add FCS on it's own. */ |
| #define IEEE802154_HW_OMIT_CKSUM 0x00000001 |
| /* Indicates that receiver will autorespond with ACK frames. */ |
| #define IEEE802154_HW_AACK 0x00000002 |
| |
| /* struct ieee802154_ops - callbacks from mac802154 to the driver |
| * |
| * This structure contains various callbacks that the driver may |
| * handle or, in some cases, must handle, for example to transmit |
| * a frame. |
| * |
| * start: Handler that 802.15.4 module calls for device initialization. |
| * This function is called before the first interface is attached. |
| * |
| * stop: Handler that 802.15.4 module calls for device cleanup. |
| * This function is called after the last interface is removed. |
| * |
| * xmit: Handler that 802.15.4 module calls for each transmitted frame. |
| * skb cntains the buffer starting from the IEEE 802.15.4 header. |
| * The low-level driver should send the frame based on available |
| * configuration. |
| * This function should return zero or negative errno. Called with |
| * pib_lock held. |
| * |
| * ed: Handler that 802.15.4 module calls for Energy Detection. |
| * This function should place the value for detected energy |
| * (usually device-dependant) in the level pointer and return |
| * either zero or negative errno. Called with pib_lock held. |
| * |
| * set_channel: |
| * Set radio for listening on specific channel. |
| * Set the device for listening on specified channel. |
| * Returns either zero, or negative errno. Called with pib_lock held. |
| * |
| * set_hw_addr_filt: |
| * Set radio for listening on specific address. |
| * Set the device for listening on specified address. |
| * Returns either zero, or negative errno. |
| * |
| * set_txpower: |
| * Set radio transmit power in dB. Called with pib_lock held. |
| * Returns either zero, or negative errno. |
| * |
| * set_lbt |
| * Enables or disables listen before talk on the device. Called with |
| * pib_lock held. |
| * Returns either zero, or negative errno. |
| * |
| * set_cca_mode |
| * Sets the CCA mode used by the device. Called with pib_lock held. |
| * Returns either zero, or negative errno. |
| * |
| * set_cca_ed_level |
| * Sets the CCA energy detection threshold in dBm. Called with pib_lock |
| * held. |
| * Returns either zero, or negative errno. |
| * |
| * set_csma_params |
| * Sets the CSMA parameter set for the PHY. Called with pib_lock held. |
| * Returns either zero, or negative errno. |
| * |
| * set_frame_retries |
| * Sets the retransmission attempt limit. Called with pib_lock held. |
| * Returns either zero, or negative errno. |
| */ |
| struct ieee802154_ops { |
| struct module *owner; |
| int (*start)(struct ieee802154_dev *dev); |
| void (*stop)(struct ieee802154_dev *dev); |
| int (*xmit)(struct ieee802154_dev *dev, |
| struct sk_buff *skb); |
| int (*ed)(struct ieee802154_dev *dev, u8 *level); |
| int (*set_channel)(struct ieee802154_dev *dev, |
| int page, |
| int channel); |
| int (*set_hw_addr_filt)(struct ieee802154_dev *dev, |
| struct ieee802154_hw_addr_filt *filt, |
| unsigned long changed); |
| int (*ieee_addr)(struct ieee802154_dev *dev, |
| u8 addr[IEEE802154_ADDR_LEN]); |
| int (*set_txpower)(struct ieee802154_dev *dev, int db); |
| int (*set_lbt)(struct ieee802154_dev *dev, bool on); |
| int (*set_cca_mode)(struct ieee802154_dev *dev, u8 mode); |
| int (*set_cca_ed_level)(struct ieee802154_dev *dev, |
| s32 level); |
| int (*set_csma_params)(struct ieee802154_dev *dev, |
| u8 min_be, u8 max_be, u8 retries); |
| int (*set_frame_retries)(struct ieee802154_dev *dev, |
| s8 retries); |
| }; |
| |
| /* Basic interface to register ieee802154 device */ |
| struct ieee802154_dev * |
| ieee802154_alloc_device(size_t priv_data_len, struct ieee802154_ops *ops); |
| void ieee802154_free_device(struct ieee802154_dev *dev); |
| int ieee802154_register_device(struct ieee802154_dev *dev); |
| void ieee802154_unregister_device(struct ieee802154_dev *dev); |
| |
| void ieee802154_rx_irqsafe(struct ieee802154_dev *dev, struct sk_buff *skb, |
| u8 lqi); |
| |
| #endif /* NET_MAC802154_H */ |