Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (32 commits)
[NETPOLL]: Fix local_bh_enable() warning.
[IPVS]: Make ip_vs_sync.c <= 80col wide.
[IPVS]: Use msleep_interruptable() instead of ssleep() aka msleep()
[HAMRADIO]: Fix baycom_epp.c compile failure.
[DCCP]: Whitespace cleanups
[DCCP] ccid3: Fixup some type conversions related to rtts
[DCCP] ccid3: BUG-FIX - conversion errors
[DCCP] ccid3: Reorder packet history source file
[DCCP] ccid3: Reorder packet history header file
[DCCP] ccid3: Make debug output consistent
[DCCP] ccid3: Perform history operations only after packet has been sent
[DCCP] ccid3: TX history - remove unused field
[DCCP] ccid3: Shift window counter computation
[DCCP] ccid3: Sanity-check RTT samples
[DCCP] ccid3: Initialise RTT values
[DCCP] ccid: Deprecate ccid_hc_tx_insert_options
[DCCP]: Warn when discarding packet due to internal errors
[DCCP]: Only deliver to the CCID rx side in charge
[DCCP]: Simplify TFRC calculation
[DCCP]: Debug timeval operations
...
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index cced73c..32b361f 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -7,20 +7,83 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/clk.h>
+#include <linux/etherdevice.h>
#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <asm/io.h>
+#include <asm/setup.h>
#include <asm/arch/board.h>
#include <asm/arch/init.h>
-struct eth_platform_data __initdata eth0_data = {
- .valid = 1,
- .mii_phy_addr = 0x10,
- .is_rmii = 0,
- .hw_addr = { 0x6a, 0x87, 0x71, 0x14, 0xcd, 0xcb },
+struct eth_addr {
+ u8 addr[6];
};
+static struct eth_addr __initdata hw_addr[2];
+
+static struct eth_platform_data __initdata eth_data[2];
extern struct lcdc_platform_data atstk1000_fb0_data;
+/*
+ * The next two functions should go away as the boot loader is
+ * supposed to initialize the macb address registers with a valid
+ * ethernet address. But we need to keep it around for a while until
+ * we can be reasonably sure the boot loader does this.
+ *
+ * The phy_id is ignored as the driver will probe for it.
+ */
+static int __init parse_tag_ethernet(struct tag *tag)
+{
+ int i;
+
+ i = tag->u.ethernet.mac_index;
+ if (i < ARRAY_SIZE(hw_addr))
+ memcpy(hw_addr[i].addr, tag->u.ethernet.hw_address,
+ sizeof(hw_addr[i].addr));
+
+ return 0;
+}
+__tagtable(ATAG_ETHERNET, parse_tag_ethernet);
+
+static void __init set_hw_addr(struct platform_device *pdev)
+{
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ const u8 *addr;
+ void __iomem *regs;
+ struct clk *pclk;
+
+ if (!res)
+ return;
+ if (pdev->id >= ARRAY_SIZE(hw_addr))
+ return;
+
+ addr = hw_addr[pdev->id].addr;
+ if (!is_valid_ether_addr(addr))
+ return;
+
+ /*
+ * Since this is board-specific code, we'll cheat and use the
+ * physical address directly as we happen to know that it's
+ * the same as the virtual address.
+ */
+ regs = (void __iomem __force *)res->start;
+ pclk = clk_get(&pdev->dev, "pclk");
+ if (!pclk)
+ return;
+
+ clk_enable(pclk);
+ __raw_writel((addr[3] << 24) | (addr[2] << 16)
+ | (addr[1] << 8) | addr[0], regs + 0x98);
+ __raw_writel((addr[5] << 8) | addr[4], regs + 0x9c);
+ clk_disable(pclk);
+ clk_put(pclk);
+}
+
void __init setup_board(void)
{
at32_map_usart(1, 0); /* /dev/ttyS0 */
@@ -38,7 +101,8 @@
at32_add_device_usart(1);
at32_add_device_usart(2);
- at32_add_device_eth(0, ð0_data);
+ set_hw_addr(at32_add_device_eth(0, ð_data[0]));
+
at32_add_device_spi(0);
at32_add_device_lcdc(0, &atstk1000_fb0_data);
diff --git a/arch/avr32/kernel/avr32_ksyms.c b/arch/avr32/kernel/avr32_ksyms.c
index 372e3f8..7c4c761 100644
--- a/arch/avr32/kernel/avr32_ksyms.c
+++ b/arch/avr32/kernel/avr32_ksyms.c
@@ -7,12 +7,12 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/delay.h>
#include <linux/io.h>
#include <linux/module.h>
#include <asm/checksum.h>
#include <asm/uaccess.h>
-#include <asm/delay.h>
/*
* GCC functions
diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c
index 317dc50..0b43259 100644
--- a/arch/avr32/kernel/process.c
+++ b/arch/avr32/kernel/process.c
@@ -38,6 +38,13 @@
void machine_halt(void)
{
+ /*
+ * Enter Stop mode. The 32 kHz oscillator will keep running so
+ * the RTC will keep the time properly and the system will
+ * boot quickly.
+ */
+ asm volatile("sleep 3\n\t"
+ "sub pc, -2");
}
void machine_power_off(void)
diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c
index ea2d1ff..a342116 100644
--- a/arch/avr32/kernel/setup.c
+++ b/arch/avr32/kernel/setup.c
@@ -229,30 +229,6 @@
}
__tagtable(ATAG_RSVD_MEM, parse_tag_rsvd_mem);
-static int __init parse_tag_ethernet(struct tag *tag)
-{
-#if 0
- const struct platform_device *pdev;
-
- /*
- * We really need a bus type that supports "classes"...this
- * will do for now (until we must handle other kinds of
- * ethernet controllers)
- */
- pdev = platform_get_device("macb", tag->u.ethernet.mac_index);
- if (pdev && pdev->dev.platform_data) {
- struct eth_platform_data *data = pdev->dev.platform_data;
-
- data->valid = 1;
- data->mii_phy_addr = tag->u.ethernet.mii_phy_addr;
- memcpy(data->hw_addr, tag->u.ethernet.hw_address,
- sizeof(data->hw_addr));
- }
-#endif
- return 0;
-}
-__tagtable(ATAG_ETHERNET, parse_tag_ethernet);
-
/*
* Scan the tag table for this tag, and call its parse function. The
* tag table is built by the linker from all the __tagtable
diff --git a/arch/avr32/lib/delay.c b/arch/avr32/lib/delay.c
index 462c830..b3bc0b5 100644
--- a/arch/avr32/lib/delay.c
+++ b/arch/avr32/lib/delay.c
@@ -12,9 +12,9 @@
#include <linux/delay.h>
#include <linux/module.h>
+#include <linux/param.h>
#include <linux/types.h>
-#include <asm/delay.h>
#include <asm/processor.h>
#include <asm/sysreg.h>
diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c
index 7ff6ad8..48f4ef3 100644
--- a/arch/avr32/mach-at32ap/at32ap7000.c
+++ b/arch/avr32/mach-at32ap/at32ap7000.c
@@ -11,6 +11,7 @@
#include <asm/io.h>
+#include <asm/arch/at32ap7000.h>
#include <asm/arch/board.h>
#include <asm/arch/portmux.h>
#include <asm/arch/sm.h>
@@ -57,6 +58,9 @@
.num_resources = ARRAY_SIZE(_name##_id##_resource), \
}
+#define select_peripheral(pin, periph, flags) \
+ at32_select_periph(GPIO_PIN_##pin, GPIO_##periph, flags)
+
#define DEV_CLK(_name, devname, bus, _index) \
static struct clk devname##_##_name = { \
.name = #_name, \
@@ -67,18 +71,6 @@
.index = _index, \
}
-enum {
- PIOA,
- PIOB,
- PIOC,
- PIOD,
-};
-
-enum {
- FUNC_A,
- FUNC_B,
-};
-
unsigned long at32ap7000_osc_rates[3] = {
[0] = 32768,
/* FIXME: these are ATSTK1002-specific */
@@ -569,26 +561,26 @@
static inline void configure_usart0_pins(void)
{
- portmux_set_func(PIOA, 8, FUNC_B); /* RXD */
- portmux_set_func(PIOA, 9, FUNC_B); /* TXD */
+ select_peripheral(PA(8), PERIPH_B, 0); /* RXD */
+ select_peripheral(PA(9), PERIPH_B, 0); /* TXD */
}
static inline void configure_usart1_pins(void)
{
- portmux_set_func(PIOA, 17, FUNC_A); /* RXD */
- portmux_set_func(PIOA, 18, FUNC_A); /* TXD */
+ select_peripheral(PA(17), PERIPH_A, 0); /* RXD */
+ select_peripheral(PA(18), PERIPH_A, 0); /* TXD */
}
static inline void configure_usart2_pins(void)
{
- portmux_set_func(PIOB, 26, FUNC_B); /* RXD */
- portmux_set_func(PIOB, 27, FUNC_B); /* TXD */
+ select_peripheral(PB(26), PERIPH_B, 0); /* RXD */
+ select_peripheral(PB(27), PERIPH_B, 0); /* TXD */
}
static inline void configure_usart3_pins(void)
{
- portmux_set_func(PIOB, 18, FUNC_B); /* RXD */
- portmux_set_func(PIOB, 17, FUNC_B); /* TXD */
+ select_peripheral(PB(18), PERIPH_B, 0); /* RXD */
+ select_peripheral(PB(17), PERIPH_B, 0); /* TXD */
}
static struct platform_device *at32_usarts[4];
@@ -654,6 +646,15 @@
DEV_CLK(hclk, macb0, hsb, 8);
DEV_CLK(pclk, macb0, pbb, 6);
+static struct eth_platform_data macb1_data;
+static struct resource macb1_resource[] = {
+ PBMEM(0xfff01c00),
+ IRQ(26),
+};
+DEFINE_DEV_DATA(macb, 1);
+DEV_CLK(hclk, macb1, hsb, 9);
+DEV_CLK(pclk, macb1, pbb, 7);
+
struct platform_device *__init
at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
{
@@ -663,27 +664,54 @@
case 0:
pdev = &macb0_device;
- portmux_set_func(PIOC, 3, FUNC_A); /* TXD0 */
- portmux_set_func(PIOC, 4, FUNC_A); /* TXD1 */
- portmux_set_func(PIOC, 7, FUNC_A); /* TXEN */
- portmux_set_func(PIOC, 8, FUNC_A); /* TXCK */
- portmux_set_func(PIOC, 9, FUNC_A); /* RXD0 */
- portmux_set_func(PIOC, 10, FUNC_A); /* RXD1 */
- portmux_set_func(PIOC, 13, FUNC_A); /* RXER */
- portmux_set_func(PIOC, 15, FUNC_A); /* RXDV */
- portmux_set_func(PIOC, 16, FUNC_A); /* MDC */
- portmux_set_func(PIOC, 17, FUNC_A); /* MDIO */
+ select_peripheral(PC(3), PERIPH_A, 0); /* TXD0 */
+ select_peripheral(PC(4), PERIPH_A, 0); /* TXD1 */
+ select_peripheral(PC(7), PERIPH_A, 0); /* TXEN */
+ select_peripheral(PC(8), PERIPH_A, 0); /* TXCK */
+ select_peripheral(PC(9), PERIPH_A, 0); /* RXD0 */
+ select_peripheral(PC(10), PERIPH_A, 0); /* RXD1 */
+ select_peripheral(PC(13), PERIPH_A, 0); /* RXER */
+ select_peripheral(PC(15), PERIPH_A, 0); /* RXDV */
+ select_peripheral(PC(16), PERIPH_A, 0); /* MDC */
+ select_peripheral(PC(17), PERIPH_A, 0); /* MDIO */
if (!data->is_rmii) {
- portmux_set_func(PIOC, 0, FUNC_A); /* COL */
- portmux_set_func(PIOC, 1, FUNC_A); /* CRS */
- portmux_set_func(PIOC, 2, FUNC_A); /* TXER */
- portmux_set_func(PIOC, 5, FUNC_A); /* TXD2 */
- portmux_set_func(PIOC, 6, FUNC_A); /* TXD3 */
- portmux_set_func(PIOC, 11, FUNC_A); /* RXD2 */
- portmux_set_func(PIOC, 12, FUNC_A); /* RXD3 */
- portmux_set_func(PIOC, 14, FUNC_A); /* RXCK */
- portmux_set_func(PIOC, 18, FUNC_A); /* SPD */
+ select_peripheral(PC(0), PERIPH_A, 0); /* COL */
+ select_peripheral(PC(1), PERIPH_A, 0); /* CRS */
+ select_peripheral(PC(2), PERIPH_A, 0); /* TXER */
+ select_peripheral(PC(5), PERIPH_A, 0); /* TXD2 */
+ select_peripheral(PC(6), PERIPH_A, 0); /* TXD3 */
+ select_peripheral(PC(11), PERIPH_A, 0); /* RXD2 */
+ select_peripheral(PC(12), PERIPH_A, 0); /* RXD3 */
+ select_peripheral(PC(14), PERIPH_A, 0); /* RXCK */
+ select_peripheral(PC(18), PERIPH_A, 0); /* SPD */
+ }
+ break;
+
+ case 1:
+ pdev = &macb1_device;
+
+ select_peripheral(PD(13), PERIPH_B, 0); /* TXD0 */
+ select_peripheral(PD(14), PERIPH_B, 0); /* TXD1 */
+ select_peripheral(PD(11), PERIPH_B, 0); /* TXEN */
+ select_peripheral(PD(12), PERIPH_B, 0); /* TXCK */
+ select_peripheral(PD(10), PERIPH_B, 0); /* RXD0 */
+ select_peripheral(PD(6), PERIPH_B, 0); /* RXD1 */
+ select_peripheral(PD(5), PERIPH_B, 0); /* RXER */
+ select_peripheral(PD(4), PERIPH_B, 0); /* RXDV */
+ select_peripheral(PD(3), PERIPH_B, 0); /* MDC */
+ select_peripheral(PD(2), PERIPH_B, 0); /* MDIO */
+
+ if (!data->is_rmii) {
+ select_peripheral(PC(19), PERIPH_B, 0); /* COL */
+ select_peripheral(PC(23), PERIPH_B, 0); /* CRS */
+ select_peripheral(PC(26), PERIPH_B, 0); /* TXER */
+ select_peripheral(PC(27), PERIPH_B, 0); /* TXD2 */
+ select_peripheral(PC(28), PERIPH_B, 0); /* TXD3 */
+ select_peripheral(PC(29), PERIPH_B, 0); /* RXD2 */
+ select_peripheral(PC(30), PERIPH_B, 0); /* RXD3 */
+ select_peripheral(PC(24), PERIPH_B, 0); /* RXCK */
+ select_peripheral(PD(15), PERIPH_B, 0); /* SPD */
}
break;
@@ -714,12 +742,12 @@
switch (id) {
case 0:
pdev = &spi0_device;
- portmux_set_func(PIOA, 0, FUNC_A); /* MISO */
- portmux_set_func(PIOA, 1, FUNC_A); /* MOSI */
- portmux_set_func(PIOA, 2, FUNC_A); /* SCK */
- portmux_set_func(PIOA, 3, FUNC_A); /* NPCS0 */
- portmux_set_func(PIOA, 4, FUNC_A); /* NPCS1 */
- portmux_set_func(PIOA, 5, FUNC_A); /* NPCS2 */
+ select_peripheral(PA(0), PERIPH_A, 0); /* MISO */
+ select_peripheral(PA(1), PERIPH_A, 0); /* MOSI */
+ select_peripheral(PA(2), PERIPH_A, 0); /* SCK */
+ select_peripheral(PA(3), PERIPH_A, 0); /* NPCS0 */
+ select_peripheral(PA(4), PERIPH_A, 0); /* NPCS1 */
+ select_peripheral(PA(5), PERIPH_A, 0); /* NPCS2 */
break;
default:
@@ -762,37 +790,37 @@
switch (id) {
case 0:
pdev = &lcdc0_device;
- portmux_set_func(PIOC, 19, FUNC_A); /* CC */
- portmux_set_func(PIOC, 20, FUNC_A); /* HSYNC */
- portmux_set_func(PIOC, 21, FUNC_A); /* PCLK */
- portmux_set_func(PIOC, 22, FUNC_A); /* VSYNC */
- portmux_set_func(PIOC, 23, FUNC_A); /* DVAL */
- portmux_set_func(PIOC, 24, FUNC_A); /* MODE */
- portmux_set_func(PIOC, 25, FUNC_A); /* PWR */
- portmux_set_func(PIOC, 26, FUNC_A); /* DATA0 */
- portmux_set_func(PIOC, 27, FUNC_A); /* DATA1 */
- portmux_set_func(PIOC, 28, FUNC_A); /* DATA2 */
- portmux_set_func(PIOC, 29, FUNC_A); /* DATA3 */
- portmux_set_func(PIOC, 30, FUNC_A); /* DATA4 */
- portmux_set_func(PIOC, 31, FUNC_A); /* DATA5 */
- portmux_set_func(PIOD, 0, FUNC_A); /* DATA6 */
- portmux_set_func(PIOD, 1, FUNC_A); /* DATA7 */
- portmux_set_func(PIOD, 2, FUNC_A); /* DATA8 */
- portmux_set_func(PIOD, 3, FUNC_A); /* DATA9 */
- portmux_set_func(PIOD, 4, FUNC_A); /* DATA10 */
- portmux_set_func(PIOD, 5, FUNC_A); /* DATA11 */
- portmux_set_func(PIOD, 6, FUNC_A); /* DATA12 */
- portmux_set_func(PIOD, 7, FUNC_A); /* DATA13 */
- portmux_set_func(PIOD, 8, FUNC_A); /* DATA14 */
- portmux_set_func(PIOD, 9, FUNC_A); /* DATA15 */
- portmux_set_func(PIOD, 10, FUNC_A); /* DATA16 */
- portmux_set_func(PIOD, 11, FUNC_A); /* DATA17 */
- portmux_set_func(PIOD, 12, FUNC_A); /* DATA18 */
- portmux_set_func(PIOD, 13, FUNC_A); /* DATA19 */
- portmux_set_func(PIOD, 14, FUNC_A); /* DATA20 */
- portmux_set_func(PIOD, 15, FUNC_A); /* DATA21 */
- portmux_set_func(PIOD, 16, FUNC_A); /* DATA22 */
- portmux_set_func(PIOD, 17, FUNC_A); /* DATA23 */
+ select_peripheral(PC(19), PERIPH_A, 0); /* CC */
+ select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */
+ select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */
+ select_peripheral(PC(22), PERIPH_A, 0); /* VSYNC */
+ select_peripheral(PC(23), PERIPH_A, 0); /* DVAL */
+ select_peripheral(PC(24), PERIPH_A, 0); /* MODE */
+ select_peripheral(PC(25), PERIPH_A, 0); /* PWR */
+ select_peripheral(PC(26), PERIPH_A, 0); /* DATA0 */
+ select_peripheral(PC(27), PERIPH_A, 0); /* DATA1 */
+ select_peripheral(PC(28), PERIPH_A, 0); /* DATA2 */
+ select_peripheral(PC(29), PERIPH_A, 0); /* DATA3 */
+ select_peripheral(PC(30), PERIPH_A, 0); /* DATA4 */
+ select_peripheral(PC(31), PERIPH_A, 0); /* DATA5 */
+ select_peripheral(PD(0), PERIPH_A, 0); /* DATA6 */
+ select_peripheral(PD(1), PERIPH_A, 0); /* DATA7 */
+ select_peripheral(PD(2), PERIPH_A, 0); /* DATA8 */
+ select_peripheral(PD(3), PERIPH_A, 0); /* DATA9 */
+ select_peripheral(PD(4), PERIPH_A, 0); /* DATA10 */
+ select_peripheral(PD(5), PERIPH_A, 0); /* DATA11 */
+ select_peripheral(PD(6), PERIPH_A, 0); /* DATA12 */
+ select_peripheral(PD(7), PERIPH_A, 0); /* DATA13 */
+ select_peripheral(PD(8), PERIPH_A, 0); /* DATA14 */
+ select_peripheral(PD(9), PERIPH_A, 0); /* DATA15 */
+ select_peripheral(PD(10), PERIPH_A, 0); /* DATA16 */
+ select_peripheral(PD(11), PERIPH_A, 0); /* DATA17 */
+ select_peripheral(PD(12), PERIPH_A, 0); /* DATA18 */
+ select_peripheral(PD(13), PERIPH_A, 0); /* DATA19 */
+ select_peripheral(PD(14), PERIPH_A, 0); /* DATA20 */
+ select_peripheral(PD(15), PERIPH_A, 0); /* DATA21 */
+ select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */
+ select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */
clk_set_parent(&lcdc0_pixclk, &pll0);
clk_set_rate(&lcdc0_pixclk, clk_get_rate(&pll0));
@@ -838,6 +866,8 @@
&atmel_usart3_usart,
&macb0_hclk,
&macb0_pclk,
+ &macb1_hclk,
+ &macb1_pclk,
&spi0_mck,
&lcdc0_hclk,
&lcdc0_pixclk,
diff --git a/arch/avr32/mach-at32ap/extint.c b/arch/avr32/mach-at32ap/extint.c
index 4dff1f9..b59272e 100644
--- a/arch/avr32/mach-at32ap/extint.c
+++ b/arch/avr32/mach-at32ap/extint.c
@@ -49,12 +49,25 @@
static int eim_set_irq_type(unsigned int irq, unsigned int flow_type)
{
struct at32_sm *sm = get_irq_chip_data(irq);
+ struct irq_desc *desc;
unsigned int i = irq - sm->eim_first_irq;
u32 mode, edge, level;
unsigned long flags;
int ret = 0;
- flow_type &= IRQ_TYPE_SENSE_MASK;
+ if (flow_type == IRQ_TYPE_NONE)
+ flow_type = IRQ_TYPE_LEVEL_LOW;
+
+ desc = &irq_desc[irq];
+ desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
+ desc->status |= flow_type & IRQ_TYPE_SENSE_MASK;
+
+ if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) {
+ desc->status |= IRQ_LEVEL;
+ set_irq_handler(irq, handle_level_irq);
+ } else {
+ set_irq_handler(irq, handle_edge_irq);
+ }
spin_lock_irqsave(&sm->lock, flags);
@@ -148,10 +161,15 @@
pattern = sm_readl(sm, EIM_MODE);
nr_irqs = fls(pattern);
+ /* Trigger on falling edge unless overridden by driver */
+ sm_writel(sm, EIM_MODE, 0UL);
+ sm_writel(sm, EIM_EDGE, 0UL);
+
sm->eim_chip = &eim_chip;
for (i = 0; i < nr_irqs; i++) {
- set_irq_chip(sm->eim_first_irq + i, &eim_chip);
+ set_irq_chip_and_handler(sm->eim_first_irq + i, &eim_chip,
+ handle_edge_irq);
set_irq_chip_data(sm->eim_first_irq + i, sm);
}
diff --git a/arch/avr32/mach-at32ap/intc.c b/arch/avr32/mach-at32ap/intc.c
index eb87a18..dd5c009 100644
--- a/arch/avr32/mach-at32ap/intc.c
+++ b/arch/avr32/mach-at32ap/intc.c
@@ -136,3 +136,7 @@
panic("Interrupt controller initialization failed!\n");
}
+unsigned long intc_get_pending(int group)
+{
+ return intc_readl(&intc0, INTREQ0 + 4 * group);
+}
diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c
index d3aabfc..f1280ed 100644
--- a/arch/avr32/mach-at32ap/pio.c
+++ b/arch/avr32/mach-at32ap/pio.c
@@ -25,27 +25,98 @@
void __iomem *regs;
const struct platform_device *pdev;
struct clk *clk;
- u32 alloc_mask;
+ u32 pinmux_mask;
char name[32];
};
static struct pio_device pio_dev[MAX_NR_PIO_DEVICES];
-void portmux_set_func(unsigned int portmux_id, unsigned int pin_id,
- unsigned int function_id)
+static struct pio_device *gpio_to_pio(unsigned int gpio)
{
struct pio_device *pio;
- u32 mask = 1 << pin_id;
+ unsigned int index;
- BUG_ON(portmux_id >= MAX_NR_PIO_DEVICES);
+ index = gpio >> 5;
+ if (index >= MAX_NR_PIO_DEVICES)
+ return NULL;
+ pio = &pio_dev[index];
+ if (!pio->regs)
+ return NULL;
- pio = &pio_dev[portmux_id];
+ return pio;
+}
- if (function_id)
+/* Pin multiplexing API */
+
+void __init at32_select_periph(unsigned int pin, unsigned int periph,
+ unsigned long flags)
+{
+ struct pio_device *pio;
+ unsigned int pin_index = pin & 0x1f;
+ u32 mask = 1 << pin_index;
+
+ pio = gpio_to_pio(pin);
+ if (unlikely(!pio)) {
+ printk("pio: invalid pin %u\n", pin);
+ goto fail;
+ }
+
+ if (unlikely(test_and_set_bit(pin_index, &pio->pinmux_mask))) {
+ printk("%s: pin %u is busy\n", pio->name, pin_index);
+ goto fail;
+ }
+
+ pio_writel(pio, PUER, mask);
+ if (periph)
pio_writel(pio, BSR, mask);
else
pio_writel(pio, ASR, mask);
+
pio_writel(pio, PDR, mask);
+ if (!(flags & AT32_GPIOF_PULLUP))
+ pio_writel(pio, PUDR, mask);
+
+ return;
+
+fail:
+ dump_stack();
+}
+
+void __init at32_select_gpio(unsigned int pin, unsigned long flags)
+{
+ struct pio_device *pio;
+ unsigned int pin_index = pin & 0x1f;
+ u32 mask = 1 << pin_index;
+
+ pio = gpio_to_pio(pin);
+ if (unlikely(!pio)) {
+ printk("pio: invalid pin %u\n", pin);
+ goto fail;
+ }
+
+ if (unlikely(test_and_set_bit(pin_index, &pio->pinmux_mask))) {
+ printk("%s: pin %u is busy\n", pio->name, pin_index);
+ goto fail;
+ }
+
+ pio_writel(pio, PUER, mask);
+ if (flags & AT32_GPIOF_HIGH)
+ pio_writel(pio, SODR, mask);
+ else
+ pio_writel(pio, CODR, mask);
+ if (flags & AT32_GPIOF_OUTPUT)
+ pio_writel(pio, OER, mask);
+ else
+ pio_writel(pio, ODR, mask);
+
+ pio_writel(pio, PER, mask);
+ if (!(flags & AT32_GPIOF_PULLUP))
+ pio_writel(pio, PUDR, mask);
+
+ return;
+
+fail:
+ dump_stack();
}
static int __init pio_probe(struct platform_device *pdev)
diff --git a/arch/avr32/mach-at32ap/sm.c b/arch/avr32/mach-at32ap/sm.c
deleted file mode 100644
index 03306eb..0000000
--- a/arch/avr32/mach-at32ap/sm.c
+++ /dev/null
@@ -1,289 +0,0 @@
-/*
- * System Manager driver for AT32AP CPUs
- *
- * Copyright (C) 2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/random.h>
-#include <linux/spinlock.h>
-
-#include <asm/intc.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-
-#include <asm/arch/sm.h>
-
-#include "sm.h"
-
-#define SM_EIM_IRQ_RESOURCE 1
-#define SM_PM_IRQ_RESOURCE 2
-#define SM_RTC_IRQ_RESOURCE 3
-
-#define to_eim(irqc) container_of(irqc, struct at32_sm, irqc)
-
-struct at32_sm system_manager;
-
-int __init at32_sm_init(void)
-{
- struct resource *regs;
- struct at32_sm *sm = &system_manager;
- int ret = -ENXIO;
-
- regs = platform_get_resource(&at32_sm_device, IORESOURCE_MEM, 0);
- if (!regs)
- goto fail;
-
- spin_lock_init(&sm->lock);
- sm->pdev = &at32_sm_device;
-
- ret = -ENOMEM;
- sm->regs = ioremap(regs->start, regs->end - regs->start + 1);
- if (!sm->regs)
- goto fail;
-
- return 0;
-
-fail:
- printk(KERN_ERR "Failed to initialize System Manager: %d\n", ret);
- return ret;
-}
-
-/*
- * External Interrupt Module (EIM).
- *
- * EIM gets level- or edge-triggered interrupts of either polarity
- * from the outside and converts it to active-high level-triggered
- * interrupts that the internal interrupt controller can handle. EIM
- * also provides masking/unmasking of interrupts, as well as
- * acknowledging of edge-triggered interrupts.
- */
-
-static irqreturn_t spurious_eim_interrupt(int irq, void *dev_id,
- struct pt_regs *regs)
-{
- printk(KERN_WARNING "Spurious EIM interrupt %d\n", irq);
- disable_irq(irq);
- return IRQ_NONE;
-}
-
-static struct irqaction eim_spurious_action = {
- .handler = spurious_eim_interrupt,
-};
-
-static irqreturn_t eim_handle_irq(int irq, void *dev_id, struct pt_regs *regs)
-{
- struct irq_controller * irqc = dev_id;
- struct at32_sm *sm = to_eim(irqc);
- unsigned long pending;
-
- /*
- * No need to disable interrupts globally. The interrupt
- * level relevant to this group must be masked all the time,
- * so we know that this particular EIM instance will not be
- * re-entered.
- */
- spin_lock(&sm->lock);
-
- pending = intc_get_pending(sm->irqc.irq_group);
- if (unlikely(!pending)) {
- printk(KERN_ERR "EIM (group %u): No interrupts pending!\n",
- sm->irqc.irq_group);
- goto unlock;
- }
-
- do {
- struct irqaction *action;
- unsigned int i;
-
- i = fls(pending) - 1;
- pending &= ~(1 << i);
- action = sm->action[i];
-
- /* Acknowledge the interrupt */
- sm_writel(sm, EIM_ICR, 1 << i);
-
- spin_unlock(&sm->lock);
-
- if (action->flags & SA_INTERRUPT)
- local_irq_disable();
- action->handler(sm->irqc.first_irq + i, action->dev_id, regs);
- local_irq_enable();
- spin_lock(&sm->lock);
- if (action->flags & SA_SAMPLE_RANDOM)
- add_interrupt_randomness(sm->irqc.first_irq + i);
- } while (pending);
-
-unlock:
- spin_unlock(&sm->lock);
- return IRQ_HANDLED;
-}
-
-static void eim_mask(struct irq_controller *irqc, unsigned int irq)
-{
- struct at32_sm *sm = to_eim(irqc);
- unsigned int i;
-
- i = irq - sm->irqc.first_irq;
- sm_writel(sm, EIM_IDR, 1 << i);
-}
-
-static void eim_unmask(struct irq_controller *irqc, unsigned int irq)
-{
- struct at32_sm *sm = to_eim(irqc);
- unsigned int i;
-
- i = irq - sm->irqc.first_irq;
- sm_writel(sm, EIM_IER, 1 << i);
-}
-
-static int eim_setup(struct irq_controller *irqc, unsigned int irq,
- struct irqaction *action)
-{
- struct at32_sm *sm = to_eim(irqc);
- sm->action[irq - sm->irqc.first_irq] = action;
- /* Acknowledge earlier interrupts */
- sm_writel(sm, EIM_ICR, (1<<(irq - sm->irqc.first_irq)));
- eim_unmask(irqc, irq);
- return 0;
-}
-
-static void eim_free(struct irq_controller *irqc, unsigned int irq,
- void *dev)
-{
- struct at32_sm *sm = to_eim(irqc);
- eim_mask(irqc, irq);
- sm->action[irq - sm->irqc.first_irq] = &eim_spurious_action;
-}
-
-static int eim_set_type(struct irq_controller *irqc, unsigned int irq,
- unsigned int type)
-{
- struct at32_sm *sm = to_eim(irqc);
- unsigned long flags;
- u32 value, pattern;
-
- spin_lock_irqsave(&sm->lock, flags);
-
- pattern = 1 << (irq - sm->irqc.first_irq);
-
- value = sm_readl(sm, EIM_MODE);
- if (type & IRQ_TYPE_LEVEL)
- value |= pattern;
- else
- value &= ~pattern;
- sm_writel(sm, EIM_MODE, value);
- value = sm_readl(sm, EIM_EDGE);
- if (type & IRQ_EDGE_RISING)
- value |= pattern;
- else
- value &= ~pattern;
- sm_writel(sm, EIM_EDGE, value);
- value = sm_readl(sm, EIM_LEVEL);
- if (type & IRQ_LEVEL_HIGH)
- value |= pattern;
- else
- value &= ~pattern;
- sm_writel(sm, EIM_LEVEL, value);
-
- spin_unlock_irqrestore(&sm->lock, flags);
-
- return 0;
-}
-
-static unsigned int eim_get_type(struct irq_controller *irqc,
- unsigned int irq)
-{
- struct at32_sm *sm = to_eim(irqc);
- unsigned long flags;
- unsigned int type = 0;
- u32 mode, edge, level, pattern;
-
- pattern = 1 << (irq - sm->irqc.first_irq);
-
- spin_lock_irqsave(&sm->lock, flags);
- mode = sm_readl(sm, EIM_MODE);
- edge = sm_readl(sm, EIM_EDGE);
- level = sm_readl(sm, EIM_LEVEL);
- spin_unlock_irqrestore(&sm->lock, flags);
-
- if (mode & pattern)
- type |= IRQ_TYPE_LEVEL;
- if (edge & pattern)
- type |= IRQ_EDGE_RISING;
- if (level & pattern)
- type |= IRQ_LEVEL_HIGH;
-
- return type;
-}
-
-static struct irq_controller_class eim_irq_class = {
- .typename = "EIM",
- .handle = eim_handle_irq,
- .setup = eim_setup,
- .free = eim_free,
- .mask = eim_mask,
- .unmask = eim_unmask,
- .set_type = eim_set_type,
- .get_type = eim_get_type,
-};
-
-static int __init eim_init(void)
-{
- struct at32_sm *sm = &system_manager;
- unsigned int i;
- u32 pattern;
- int ret;
-
- /*
- * The EIM is really the same module as SM, so register
- * mapping, etc. has been taken care of already.
- */
-
- /*
- * Find out how many interrupt lines that are actually
- * implemented in hardware.
- */
- sm_writel(sm, EIM_IDR, ~0UL);
- sm_writel(sm, EIM_MODE, ~0UL);
- pattern = sm_readl(sm, EIM_MODE);
- sm->irqc.nr_irqs = fls(pattern);
-
- ret = -ENOMEM;
- sm->action = kmalloc(sizeof(*sm->action) * sm->irqc.nr_irqs,
- GFP_KERNEL);
- if (!sm->action)
- goto out;
-
- for (i = 0; i < sm->irqc.nr_irqs; i++)
- sm->action[i] = &eim_spurious_action;
-
- spin_lock_init(&sm->lock);
- sm->irqc.irq_group = sm->pdev->resource[SM_EIM_IRQ_RESOURCE].start;
- sm->irqc.class = &eim_irq_class;
-
- ret = intc_register_controller(&sm->irqc);
- if (ret < 0)
- goto out_free_actions;
-
- printk("EIM: External Interrupt Module at 0x%p, IRQ group %u\n",
- sm->regs, sm->irqc.irq_group);
- printk("EIM: Handling %u external IRQs, starting with IRQ%u\n",
- sm->irqc.nr_irqs, sm->irqc.first_irq);
-
- return 0;
-
-out_free_actions:
- kfree(sm->action);
-out:
- return ret;
-}
-arch_initcall(eim_init);
diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig
index 1f9300f..96e9410 100644
--- a/arch/mips/configs/malta_defconfig
+++ b/arch/mips/configs/malta_defconfig
@@ -644,7 +644,85 @@
#
# Memory Technology Devices (MTD)
#
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
#
# Parallel port support
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index 2f4508f..cecff24 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -109,6 +109,10 @@
.con_initcall.init : { *(.con_initcall.init) }
__con_initcall_end = .;
SECURITY_INIT
+ /* .exit.text is discarded at runtime, not link time, to deal with
+ references from .rodata */
+ .exit.text : { *(.exit.text) }
+ .exit.data : { *(.exit.data) }
. = ALIGN(_PAGE_SIZE);
__initramfs_start = .;
.init.ramfs : { *(.init.ramfs) }
@@ -136,8 +140,6 @@
/* Sections to be discarded */
/DISCARD/ : {
- *(.exit.text)
- *(.exit.data)
*(.exitcall.exit)
/* ABI crap starts here */
diff --git a/arch/mips/mips-boards/malta/Makefile b/arch/mips/mips-boards/malta/Makefile
index 77ee5c6..b662c75 100644
--- a/arch/mips/mips-boards/malta/Makefile
+++ b/arch/mips/mips-boards/malta/Makefile
@@ -19,5 +19,5 @@
# under Linux.
#
-obj-y := malta_int.o malta_setup.o
+obj-y := malta_int.o malta_mtd.o malta_setup.o
obj-$(CONFIG_SMP) += malta_smp.o
diff --git a/arch/mips/mips-boards/malta/malta_setup.c b/arch/mips/mips-boards/malta/malta_setup.c
index 282f3e5..56ea766 100644
--- a/arch/mips/mips-boards/malta/malta_setup.c
+++ b/arch/mips/mips-boards/malta/malta_setup.c
@@ -21,13 +21,6 @@
#include <linux/pci.h>
#include <linux/screen_info.h>
-#ifdef CONFIG_MTD
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#endif
-
#include <asm/cpu.h>
#include <asm/bootinfo.h>
#include <asm/irq.h>
@@ -58,30 +51,6 @@
{ .name = "dma2", .start = 0xc0, .end = 0xdf, .flags = IORESOURCE_BUSY },
};
-#ifdef CONFIG_MTD
-static struct mtd_partition malta_mtd_partitions[] = {
- {
- .name = "YAMON",
- .offset = 0x0,
- .size = 0x100000,
- .mask_flags = MTD_WRITEABLE
- },
- {
- .name = "User FS",
- .offset = 0x100000,
- .size = 0x2e0000
- },
- {
- .name = "Board Config",
- .offset = 0x3e0000,
- .size = 0x020000,
- .mask_flags = MTD_WRITEABLE
- }
-};
-
-#define number_partitions (sizeof(malta_mtd_partitions)/sizeof(struct mtd_partition))
-#endif
-
const char *get_system_type(void)
{
return "MIPS Malta";
@@ -211,14 +180,6 @@
#endif
#endif
-#ifdef CONFIG_MTD
- /*
- * Support for MTD on Malta. Use the generic physmap driver
- */
- physmap_configure(0x1e000000, 0x400000, 4, NULL);
- physmap_set_partitions(malta_mtd_partitions, number_partitions);
-#endif
-
mips_reboot_setup();
board_time_init = mips_time_init;
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index 9e29ba9..ea2d153 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -316,7 +316,7 @@
void __init paging_init(void)
{
unsigned long zones_size[MAX_NR_ZONES] = { 0, };
- unsigned long max_dma, high, low;
+ unsigned long max_dma, low;
#ifndef CONFIG_FLATMEM
unsigned long zholes_size[MAX_NR_ZONES] = { 0, };
unsigned long i, j, pfn;
@@ -331,7 +331,6 @@
max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
low = max_low_pfn;
- high = highend_pfn;
#ifdef CONFIG_ISA
if (low < max_dma)
@@ -344,13 +343,13 @@
zones_size[ZONE_DMA] = low;
#endif
#ifdef CONFIG_HIGHMEM
- if (cpu_has_dc_aliases) {
- printk(KERN_WARNING "This processor doesn't support highmem.");
- if (high - low)
- printk(" %ldk highmem ignored", high - low);
- printk("\n");
- } else
- zones_size[ZONE_HIGHMEM] = high - low;
+ zones_size[ZONE_HIGHMEM] = highend_pfn - highstart_pfn;
+
+ if (cpu_has_dc_aliases && zones_size[ZONE_HIGHMEM]) {
+ printk(KERN_WARNING "This processor doesn't support highmem."
+ " %ldk highmem ignored\n", zones_size[ZONE_HIGHMEM]);
+ zones_size[ZONE_HIGHMEM] = 0;
+ }
#endif
#ifdef CONFIG_FLATMEM
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 56c3c40..8699dad 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -107,6 +107,11 @@
bool
default y
+config GENERIC_BUG
+ bool
+ default y
+ depends on BUG
+
config DEFAULT_UIMAGE
bool
help
@@ -478,6 +483,7 @@
select PPC_UDBG_16550
select PPC_970_NAP
select PPC_NATIVE
+ select PPC_RTAS
default n
help
This option enables support for the Maple 970FX Evaluation Board.
@@ -714,7 +720,7 @@
config MATH_EMULATION
bool "Math emulation"
- depends on 4xx || 8xx || E200 || E500
+ depends on 4xx || 8xx || E200 || PPC_83xx || E500
---help---
Some PowerPC chips designed for embedded applications do not have
a floating-point unit and therefore do not implement the
diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig
index f2d888e..70ed613 100644
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -157,6 +157,7 @@
CONFIG_PS3_HTAB_SIZE=20
CONFIG_PS3_DYNAMIC_DMA=y
CONFIG_PS3_USE_LPAR_ADDR=y
+CONFIG_PS3_VUART=y
#
# Kernel options
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 4fe53d0..d2ded19 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -77,6 +77,7 @@
ifeq ($(CONFIG_PPC_ISERIES),y)
extra-y += lparmap.s
+$(obj)/head_64.o: $(obj)/lparmap.s
AFLAGS_head_64.o += -I$(obj)
endif
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 9d1614c..b742013 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -833,7 +833,7 @@
.pvr_mask = 0x7fff0000,
.pvr_value = 0x00840000,
.cpu_name = "e300c2",
- .cpu_features = CPU_FTRS_E300,
+ .cpu_features = CPU_FTRS_E300C2,
.cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
.icache_bsize = 32,
.dcache_bsize = 32,
@@ -1136,8 +1136,7 @@
.pvr_mask = 0xff000fff,
.pvr_value = 0x53000890,
.cpu_name = "440SPe Rev. A",
- .cpu_features = CPU_FTR_SPLIT_ID_CACHE |
- CPU_FTR_USE_TB,
+ .cpu_features = CPU_FTRS_44X,
.cpu_user_features = COMMON_USER_BOOKE,
.icache_bsize = 32,
.dcache_bsize = 32,
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index d88e182..9417cf5 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -437,6 +437,13 @@
/* Floating-point unavailable */
. = 0x800
FPUnavailable:
+BEGIN_FTR_SECTION
+/*
+ * Certain Freescale cores don't have a FPU and treat fp instructions
+ * as a FP Unavailable exception. Redirect to illegal/emulation handling.
+ */
+ b ProgramCheck
+END_FTR_SECTION_IFSET(CPU_FTR_FPU_UNAVAILABLE)
EXCEPTION_PROLOG
bne load_up_fpu /* if from user, just load it up */
addi r3,r1,STACK_FRAME_OVERHEAD
diff --git a/arch/powerpc/kernel/module_32.c b/arch/powerpc/kernel/module_32.c
index e2c3c6a..8339fd6 100644
--- a/arch/powerpc/kernel/module_32.c
+++ b/arch/powerpc/kernel/module_32.c
@@ -23,6 +23,7 @@
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/cache.h>
+#include <linux/bug.h>
#include "setup.h"
@@ -290,23 +291,11 @@
struct module *me)
{
const Elf_Shdr *sect;
+ int err;
- me->arch.bug_table = NULL;
- me->arch.num_bugs = 0;
-
- /* Find the __bug_table section, if present */
- sect = find_section(hdr, sechdrs, "__bug_table");
- if (sect != NULL) {
- me->arch.bug_table = (void *) sect->sh_addr;
- me->arch.num_bugs = sect->sh_size / sizeof(struct bug_entry);
- }
-
- /*
- * Strictly speaking this should have a spinlock to protect against
- * traversals, but since we only traverse on BUG()s, a spinlock
- * could potentially lead to deadlock and thus be counter-productive.
- */
- list_add(&me->arch.bug_list, &module_bug_list);
+ err = module_bug_finalize(hdr, sechdrs, me);
+ if (err) /* never true, currently */
+ return err;
/* Apply feature fixups */
sect = find_section(hdr, sechdrs, "__ftr_fixup");
@@ -320,7 +309,7 @@
void module_arch_cleanup(struct module *mod)
{
- list_del(&mod->arch.bug_list);
+ module_bug_cleanup(mod);
}
struct bug_entry *module_find_bug(unsigned long bugaddr)
diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c
index 8dd1f0a..75c7c4f 100644
--- a/arch/powerpc/kernel/module_64.c
+++ b/arch/powerpc/kernel/module_64.c
@@ -20,6 +20,7 @@
#include <linux/moduleloader.h>
#include <linux/err.h>
#include <linux/vmalloc.h>
+#include <linux/bug.h>
#include <asm/module.h>
#include <asm/uaccess.h>
#include <asm/firmware.h>
@@ -439,23 +440,11 @@
const Elf_Shdr *sechdrs, struct module *me)
{
const Elf_Shdr *sect;
+ int err;
- me->arch.bug_table = NULL;
- me->arch.num_bugs = 0;
-
- /* Find the __bug_table section, if present */
- sect = find_section(hdr, sechdrs, "__bug_table");
- if (sect != NULL) {
- me->arch.bug_table = (void *) sect->sh_addr;
- me->arch.num_bugs = sect->sh_size / sizeof(struct bug_entry);
- }
-
- /*
- * Strictly speaking this should have a spinlock to protect against
- * traversals, but since we only traverse on BUG()s, a spinlock
- * could potentially lead to deadlock and thus be counter-productive.
- */
- list_add(&me->arch.bug_list, &module_bug_list);
+ err = module_bug_finalize(hdr, sechdrs, me);
+ if (err)
+ return err;
/* Apply feature fixups */
sect = find_section(hdr, sechdrs, "__ftr_fixup");
@@ -475,7 +464,7 @@
void module_arch_cleanup(struct module *mod)
{
- list_del(&mod->arch.bug_list);
+ module_bug_cleanup(mod);
}
struct bug_entry *module_find_bug(unsigned long bugaddr)
diff --git a/arch/powerpc/kernel/of_device.c b/arch/powerpc/kernel/of_device.c
index 8a06724..e921514 100644
--- a/arch/powerpc/kernel/of_device.c
+++ b/arch/powerpc/kernel/of_device.c
@@ -109,9 +109,7 @@
if (rc)
return rc;
- device_create_file(&ofdev->dev, &dev_attr_devspec);
-
- return 0;
+ return device_create_file(&ofdev->dev, &dev_attr_devspec);
}
void of_device_unregister(struct of_device *ofdev)
diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c
index b3189d0..3002ea3 100644
--- a/arch/powerpc/kernel/of_platform.c
+++ b/arch/powerpc/kernel/of_platform.c
@@ -169,7 +169,7 @@
char *name = dev->dev.bus_id;
const u32 *reg;
u64 addr;
- long magic;
+ int magic;
/*
* If it's a DCR based device, use 'd' for native DCRs
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index 2f54cd8..8336dea 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -736,25 +736,51 @@
return NULL;
}
-static int
-scan_OF_pci_childs_iterator(struct device_node* node, void* data)
+static struct device_node *scan_OF_for_pci_dev(struct device_node *parent,
+ unsigned int devfn)
{
- const unsigned int *reg;
- u8* fdata = (u8*)data;
-
- reg = get_property(node, "reg", NULL);
- if (reg && ((reg[0] >> 8) & 0xff) == fdata[1]
- && ((reg[0] >> 16) & 0xff) == fdata[0])
- return 1;
- return 0;
+ struct device_node *np = NULL;
+ const u32 *reg;
+ unsigned int psize;
+
+ while ((np = of_get_next_child(parent, np)) != NULL) {
+ reg = get_property(np, "reg", &psize);
+ if (reg == NULL || psize < 4)
+ continue;
+ if (((reg[0] >> 8) & 0xff) == devfn)
+ return np;
+ }
+ return NULL;
}
-static struct device_node*
-scan_OF_childs_for_device(struct device_node* node, u8 bus, u8 dev_fn)
-{
- u8 filter_data[2] = {bus, dev_fn};
- return scan_OF_pci_childs(node, scan_OF_pci_childs_iterator, filter_data);
+static struct device_node *scan_OF_for_pci_bus(struct pci_bus *bus)
+{
+ struct device_node *parent, *np;
+
+ /* Are we a root bus ? */
+ if (bus->self == NULL || bus->parent == NULL) {
+ struct pci_controller *hose = pci_bus_to_hose(bus->number);
+ if (hose == NULL)
+ return NULL;
+ return of_node_get(hose->arch_data);
+ }
+
+ /* not a root bus, we need to get our parent */
+ parent = scan_OF_for_pci_bus(bus->parent);
+ if (parent == NULL)
+ return NULL;
+
+ /* now iterate for children for a match */
+ np = scan_OF_for_pci_dev(parent, bus->self->devfn);
+ of_node_put(parent);
+
+ /* sanity check */
+ if (strcmp(np->type, "pci") != 0)
+ printk(KERN_WARNING "pci: wrong type \"%s\" for bridge %s\n",
+ np->type, np->full_name);
+
+ return np;
}
/*
@@ -763,43 +789,25 @@
struct device_node *
pci_busdev_to_OF_node(struct pci_bus *bus, int devfn)
{
- struct pci_controller *hose;
- struct device_node *node;
- int busnr;
+ struct device_node *parent, *np;
if (!have_of)
return NULL;
-
- /* Lookup the hose */
- busnr = bus->number;
- hose = pci_bus_to_hose(busnr);
- if (!hose)
- return NULL;
- /* Check it has an OF node associated */
- node = (struct device_node *) hose->arch_data;
- if (!node)
+ DBG("pci_busdev_to_OF_node(%d,0x%x)\n", bus->number, devfn);
+ parent = scan_OF_for_pci_bus(bus);
+ if (parent == NULL)
return NULL;
+ DBG(" parent is %s\n", parent ? parent->full_name : "<NULL>");
+ np = scan_OF_for_pci_dev(parent, devfn);
+ of_node_put(parent);
+ DBG(" result is %s\n", np ? np->full_name : "<NULL>");
- /* Fixup bus number according to what OF think it is. */
-#ifdef CONFIG_PPC_PMAC
- /* The G5 need a special case here. Basically, we don't remap all
- * busses on it so we don't create the pci-OF-map. However, we do
- * remap the AGP bus and so have to deal with it. A future better
- * fix has to be done by making the remapping per-host and always
- * filling the pci_to_OF map. --BenH
+ /* XXX most callers don't release the returned node
+ * mostly because ppc64 doesn't increase the refcount,
+ * we need to fix that.
*/
- if (machine_is(powermac) && busnr >= 0xf0)
- busnr -= 0xf0;
- else
-#endif
- if (pci_to_OF_bus_map)
- busnr = pci_to_OF_bus_map[busnr];
- if (busnr == 0xff)
- return NULL;
-
- /* Now, lookup childs of the hose */
- return scan_OF_childs_for_device(node->child, busnr, devfn);
+ return np;
}
EXPORT_SYMBOL(pci_busdev_to_OF_node);
@@ -1544,7 +1552,7 @@
static struct resource *__pci_mmap_make_offset(struct pci_dev *dev,
- unsigned long *offset,
+ resource_size_t *offset,
enum pci_mmap_state mmap_state)
{
struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
@@ -1556,7 +1564,9 @@
/* If memory, add on the PCI bridge address offset */
if (mmap_state == pci_mmap_mem) {
+#if 0 /* See comment in pci_resource_to_user() for why this is disabled */
*offset += hose->pci_mem_offset;
+#endif
res_bit = IORESOURCE_MEM;
} else {
io_offset = hose->io_base_virt - (void __iomem *)_IO_BASE;
@@ -1624,9 +1634,6 @@
else
prot |= _PAGE_GUARDED;
- printk("PCI map for %s:%llx, prot: %lx\n", pci_name(dev),
- (unsigned long long)rp->start, prot);
-
return __pgprot(prot);
}
@@ -1695,7 +1702,7 @@
enum pci_mmap_state mmap_state,
int write_combine)
{
- unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
+ resource_size_t offset = vma->vm_pgoff << PAGE_SHIFT;
struct resource *rp;
int ret;
@@ -1808,22 +1815,42 @@
resource_size_t *start, resource_size_t *end)
{
struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
- unsigned long offset = 0;
+ resource_size_t offset = 0;
if (hose == NULL)
return;
if (rsrc->flags & IORESOURCE_IO)
- offset = (void __iomem *)_IO_BASE - hose->io_base_virt
- + hose->io_base_phys;
+ offset = (unsigned long)hose->io_base_virt - _IO_BASE;
- *start = rsrc->start + offset;
- *end = rsrc->end + offset;
+ /* We pass a fully fixed up address to userland for MMIO instead of
+ * a BAR value because X is lame and expects to be able to use that
+ * to pass to /dev/mem !
+ *
+ * That means that we'll have potentially 64 bits values where some
+ * userland apps only expect 32 (like X itself since it thinks only
+ * Sparc has 64 bits MMIO) but if we don't do that, we break it on
+ * 32 bits CHRPs :-(
+ *
+ * Hopefully, the sysfs insterface is immune to that gunk. Once X
+ * has been fixed (and the fix spread enough), we can re-enable the
+ * 2 lines below and pass down a BAR value to userland. In that case
+ * we'll also have to re-enable the matching code in
+ * __pci_mmap_make_offset().
+ *
+ * BenH.
+ */
+#if 0
+ else if (rsrc->flags & IORESOURCE_MEM)
+ offset = hose->pci_mem_offset;
+#endif
+
+ *start = rsrc->start - offset;
+ *end = rsrc->end - offset;
}
-void __init
-pci_init_resource(struct resource *res, unsigned long start, unsigned long end,
- int flags, char *name)
+void __init pci_init_resource(struct resource *res, resource_size_t start,
+ resource_size_t end, int flags, char *name)
{
res->start = start;
res->end = end;
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 6fa9a0a..a6b7692 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -682,7 +682,7 @@
* Returns negative error code on failure, zero on success.
*/
static struct resource *__pci_mmap_make_offset(struct pci_dev *dev,
- unsigned long *offset,
+ resource_size_t *offset,
enum pci_mmap_state mmap_state)
{
struct pci_controller *hose = pci_bus_to_host(dev->bus);
@@ -694,7 +694,9 @@
/* If memory, add on the PCI bridge address offset */
if (mmap_state == pci_mmap_mem) {
+#if 0 /* See comment in pci_resource_to_user() for why this is disabled */
*offset += hose->pci_mem_offset;
+#endif
res_bit = IORESOURCE_MEM;
} else {
io_offset = (unsigned long)hose->io_base_virt - pci_io_base;
@@ -762,9 +764,6 @@
else
prot |= _PAGE_GUARDED;
- printk(KERN_DEBUG "PCI map for %s:%lx, prot: %lx\n", pci_name(dev), rp->start,
- prot);
-
return __pgprot(prot);
}
@@ -832,7 +831,7 @@
int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine)
{
- unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
+ resource_size_t offset = vma->vm_pgoff << PAGE_SHIFT;
struct resource *rp;
int ret;
@@ -1333,20 +1332,41 @@
void pci_resource_to_user(const struct pci_dev *dev, int bar,
const struct resource *rsrc,
- u64 *start, u64 *end)
+ resource_size_t *start, resource_size_t *end)
{
struct pci_controller *hose = pci_bus_to_host(dev->bus);
- unsigned long offset = 0;
+ resource_size_t offset = 0;
if (hose == NULL)
return;
if (rsrc->flags & IORESOURCE_IO)
- offset = pci_io_base - (unsigned long)hose->io_base_virt +
- hose->io_base_phys;
+ offset = (unsigned long)hose->io_base_virt - pci_io_base;
- *start = rsrc->start + offset;
- *end = rsrc->end + offset;
+ /* We pass a fully fixed up address to userland for MMIO instead of
+ * a BAR value because X is lame and expects to be able to use that
+ * to pass to /dev/mem !
+ *
+ * That means that we'll have potentially 64 bits values where some
+ * userland apps only expect 32 (like X itself since it thinks only
+ * Sparc has 64 bits MMIO) but if we don't do that, we break it on
+ * 32 bits CHRPs :-(
+ *
+ * Hopefully, the sysfs insterface is immune to that gunk. Once X
+ * has been fixed (and the fix spread enough), we can re-enable the
+ * 2 lines below and pass down a BAR value to userland. In that case
+ * we'll also have to re-enable the matching code in
+ * __pci_mmap_make_offset().
+ *
+ * BenH.
+ */
+#if 0
+ else if (rsrc->flags & IORESOURCE_MEM)
+ offset = hose->pci_mem_offset;
+#endif
+
+ *start = rsrc->start - offset;
+ *end = rsrc->end - offset;
}
struct pci_controller* pci_find_hose_for_OF_device(struct device_node* node)
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index 9179f07..95776b6 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -208,7 +208,7 @@
extern long *intercept_table;
EXPORT_SYMBOL(intercept_table);
#endif /* CONFIG_PPC_STD_MMU_32 */
-#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_DCR_NATIVE
EXPORT_SYMBOL(__mtdcr);
EXPORT_SYMBOL(__mfdcr);
#endif
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index c18dbe7..1fc732a 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -804,6 +804,56 @@
return of_read_ulong(p, s);
}
+#ifdef CONFIG_PPC_PSERIES
+/*
+ * Interpret the ibm,dynamic-memory property in the
+ * /ibm,dynamic-reconfiguration-memory node.
+ * This contains a list of memory blocks along with NUMA affinity
+ * information.
+ */
+static int __init early_init_dt_scan_drconf_memory(unsigned long node)
+{
+ cell_t *dm, *ls;
+ unsigned long l, n;
+ unsigned long base, size, lmb_size, flags;
+
+ ls = (cell_t *)of_get_flat_dt_prop(node, "ibm,lmb-size", &l);
+ if (ls == NULL || l < dt_root_size_cells * sizeof(cell_t))
+ return 0;
+ lmb_size = dt_mem_next_cell(dt_root_size_cells, &ls);
+
+ dm = (cell_t *)of_get_flat_dt_prop(node, "ibm,dynamic-memory", &l);
+ if (dm == NULL || l < sizeof(cell_t))
+ return 0;
+
+ n = *dm++; /* number of entries */
+ if (l < (n * (dt_root_addr_cells + 4) + 1) * sizeof(cell_t))
+ return 0;
+
+ for (; n != 0; --n) {
+ base = dt_mem_next_cell(dt_root_addr_cells, &dm);
+ flags = dm[3];
+ /* skip DRC index, pad, assoc. list index, flags */
+ dm += 4;
+ /* skip this block if the reserved bit is set in flags (0x80)
+ or if the block is not assigned to this partition (0x8) */
+ if ((flags & 0x80) || !(flags & 0x8))
+ continue;
+ size = lmb_size;
+ if (iommu_is_off) {
+ if (base >= 0x80000000ul)
+ continue;
+ if ((base + size) > 0x80000000ul)
+ size = 0x80000000ul - base;
+ }
+ lmb_add(base, size);
+ }
+ lmb_dump_all();
+ return 0;
+}
+#else
+#define early_init_dt_scan_drconf_memory(node) 0
+#endif /* CONFIG_PPC_PSERIES */
static int __init early_init_dt_scan_memory(unsigned long node,
const char *uname, int depth, void *data)
@@ -812,6 +862,11 @@
cell_t *reg, *endp;
unsigned long l;
+ /* Look for the ibm,dynamic-reconfiguration-memory node */
+ if (depth == 1 &&
+ strcmp(uname, "ibm,dynamic-reconfiguration-memory") == 0)
+ return early_init_dt_scan_drconf_memory(node);
+
/* We are scanning "memory" nodes only */
if (type == NULL) {
/*
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 46cf326..520ef42f 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -679,7 +679,7 @@
/* option vector 5: PAPR/OF options */
3 - 2, /* length */
0, /* don't ignore, don't halt */
- OV5_LPAR | OV5_SPLPAR | OV5_LARGE_PAGES,
+ OV5_LPAR | OV5_SPLPAR | OV5_LARGE_PAGES | OV5_DRCONF_MEMORY,
};
/* Old method - ELF header with PT_NOTE sections */
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index 387ed0d9..76b5d7e 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -303,6 +303,12 @@
}
EXPORT_SYMBOL(rtas_token);
+int rtas_service_present(const char *service)
+{
+ return rtas_token(service) != RTAS_UNKNOWN_SERVICE;
+}
+EXPORT_SYMBOL(rtas_service_present);
+
#ifdef CONFIG_RTAS_ERROR_LOGGING
/*
* Return the firmware-specified size of the error log buffer
@@ -810,32 +816,6 @@
return 0;
}
-#ifdef CONFIG_HOTPLUG_CPU
-/* This version can't take the spinlock, because it never returns */
-static struct rtas_args rtas_stop_self_args = {
- /* The token is initialized for real in setup_system() */
- .token = RTAS_UNKNOWN_SERVICE,
- .nargs = 0,
- .nret = 1,
- .rets = &rtas_stop_self_args.args[0],
-};
-
-void rtas_stop_self(void)
-{
- struct rtas_args *rtas_args = &rtas_stop_self_args;
-
- local_irq_disable();
-
- BUG_ON(rtas_args->token == RTAS_UNKNOWN_SERVICE);
-
- printk("cpu %u (hwid %u) Ready to die...\n",
- smp_processor_id(), hard_smp_processor_id());
- enter_rtas(__pa(rtas_args));
-
- panic("Alas, I survived.\n");
-}
-#endif
-
/*
* Call early during boot, before mem init or bootmem, to retrieve the RTAS
* informations from the device-tree and allocate the RMO buffer for userland
@@ -880,9 +860,6 @@
#endif
rtas_rmo_buf = lmb_alloc_base(RTAS_RMOBUF_MAX, PAGE_SIZE, rtas_region);
-#ifdef CONFIG_HOTPLUG_CPU
- rtas_stop_self_args.token = rtas_token("stop-self");
-#endif /* CONFIG_HOTPLUG_CPU */
#ifdef CONFIG_RTAS_ERROR_LOGGING
rtas_last_error_token = rtas_token("rtas-last-error");
#endif
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index 63ed265..400ab2b 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -181,6 +181,8 @@
SYSFS_PMCSETUP(pmc7, SPRN_PMC7);
SYSFS_PMCSETUP(pmc8, SPRN_PMC8);
SYSFS_PMCSETUP(purr, SPRN_PURR);
+SYSFS_PMCSETUP(spurr, SPRN_SPURR);
+SYSFS_PMCSETUP(dscr, SPRN_DSCR);
static SYSDEV_ATTR(mmcr0, 0600, show_mmcr0, store_mmcr0);
static SYSDEV_ATTR(mmcr1, 0600, show_mmcr1, store_mmcr1);
@@ -194,6 +196,8 @@
static SYSDEV_ATTR(pmc7, 0600, show_pmc7, store_pmc7);
static SYSDEV_ATTR(pmc8, 0600, show_pmc8, store_pmc8);
static SYSDEV_ATTR(purr, 0600, show_purr, NULL);
+static SYSDEV_ATTR(spurr, 0600, show_spurr, NULL);
+static SYSDEV_ATTR(dscr, 0600, show_dscr, store_dscr);
static void register_cpu_online(unsigned int cpu)
{
@@ -231,6 +235,12 @@
if (cpu_has_feature(CPU_FTR_PURR))
sysdev_create_file(s, &attr_purr);
+
+ if (cpu_has_feature(CPU_FTR_SPURR))
+ sysdev_create_file(s, &attr_spurr);
+
+ if (cpu_has_feature(CPU_FTR_DSCR))
+ sysdev_create_file(s, &attr_dscr);
}
#ifdef CONFIG_HOTPLUG_CPU
@@ -272,6 +282,12 @@
if (cpu_has_feature(CPU_FTR_PURR))
sysdev_remove_file(s, &attr_purr);
+
+ if (cpu_has_feature(CPU_FTR_SPURR))
+ sysdev_remove_file(s, &attr_spurr);
+
+ if (cpu_has_feature(CPU_FTR_DSCR))
+ sysdev_remove_file(s, &attr_dscr);
}
#endif /* CONFIG_HOTPLUG_CPU */
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 0d4e203..535f506 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -32,6 +32,7 @@
#include <linux/kprobes.h>
#include <linux/kexec.h>
#include <linux/backlight.h>
+#include <linux/bug.h>
#include <asm/kdebug.h>
#include <asm/pgtable.h>
@@ -727,54 +728,9 @@
return -EINVAL;
}
-/*
- * Look through the list of trap instructions that are used for BUG(),
- * BUG_ON() and WARN_ON() and see if we hit one. At this point we know
- * that the exception was caused by a trap instruction of some kind.
- * Returns 1 if we should continue (i.e. it was a WARN_ON) or 0
- * otherwise.
- */
-extern struct bug_entry __start___bug_table[], __stop___bug_table[];
-
-#ifndef CONFIG_MODULES
-#define module_find_bug(x) NULL
-#endif
-
-struct bug_entry *find_bug(unsigned long bugaddr)
+int is_valid_bugaddr(unsigned long addr)
{
- struct bug_entry *bug;
-
- for (bug = __start___bug_table; bug < __stop___bug_table; ++bug)
- if (bugaddr == bug->bug_addr)
- return bug;
- return module_find_bug(bugaddr);
-}
-
-static int check_bug_trap(struct pt_regs *regs)
-{
- struct bug_entry *bug;
- unsigned long addr;
-
- if (regs->msr & MSR_PR)
- return 0; /* not in kernel */
- addr = regs->nip; /* address of trap instruction */
- if (addr < PAGE_OFFSET)
- return 0;
- bug = find_bug(regs->nip);
- if (bug == NULL)
- return 0;
- if (bug->line & BUG_WARNING_TRAP) {
- /* this is a WARN_ON rather than BUG/BUG_ON */
- printk(KERN_ERR "Badness in %s at %s:%ld\n",
- bug->function, bug->file,
- bug->line & ~BUG_WARNING_TRAP);
- dump_stack();
- return 1;
- }
- printk(KERN_CRIT "kernel BUG in %s at %s:%ld!\n",
- bug->function, bug->file, bug->line);
-
- return 0;
+ return is_kernel_addr(addr);
}
void __kprobes program_check_exception(struct pt_regs *regs)
@@ -782,6 +738,8 @@
unsigned int reason = get_reason(regs);
extern int do_mathemu(struct pt_regs *regs);
+ /* We can now get here via a FP Unavailable exception if the core
+ * has no FPU, in that case no reason flags will be set */
#ifdef CONFIG_MATH_EMULATION
/* (reason & REASON_ILLEGAL) would be the obvious thing here,
* but there seems to be a hardware bug on the 405GP (RevD)
@@ -808,7 +766,9 @@
return;
if (debugger_bpt(regs))
return;
- if (check_bug_trap(regs)) {
+
+ if (!(regs->msr & MSR_PR) && /* not user-mode */
+ report_bug(regs->nip) == BUG_TRAP_TYPE_WARN) {
regs->nip += 4;
return;
}
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 04b9867..04b8e71 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -62,11 +62,7 @@
__stop___ex_table = .;
}
- __bug_table : {
- __start___bug_table = .;
- *(__bug_table)
- __stop___bug_table = .;
- }
+ BUG_TABLE
/*
* Init sections discarded at runtime
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 9da01dc..2627909 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -295,6 +295,63 @@
return lmb_end_of_DRAM() - start;
}
+/*
+ * Extract NUMA information from the ibm,dynamic-reconfiguration-memory
+ * node. This assumes n_mem_{addr,size}_cells have been set.
+ */
+static void __init parse_drconf_memory(struct device_node *memory)
+{
+ const unsigned int *lm, *dm, *aa;
+ unsigned int ls, ld, la;
+ unsigned int n, aam, aalen;
+ unsigned long lmb_size, size;
+ int nid, default_nid = 0;
+ unsigned int start, ai, flags;
+
+ lm = get_property(memory, "ibm,lmb-size", &ls);
+ dm = get_property(memory, "ibm,dynamic-memory", &ld);
+ aa = get_property(memory, "ibm,associativity-lookup-arrays", &la);
+ if (!lm || !dm || !aa ||
+ ls < sizeof(unsigned int) || ld < sizeof(unsigned int) ||
+ la < 2 * sizeof(unsigned int))
+ return;
+
+ lmb_size = read_n_cells(n_mem_size_cells, &lm);
+ n = *dm++; /* number of LMBs */
+ aam = *aa++; /* number of associativity lists */
+ aalen = *aa++; /* length of each associativity list */
+ if (ld < (n * (n_mem_addr_cells + 4) + 1) * sizeof(unsigned int) ||
+ la < (aam * aalen + 2) * sizeof(unsigned int))
+ return;
+
+ for (; n != 0; --n) {
+ start = read_n_cells(n_mem_addr_cells, &dm);
+ ai = dm[2];
+ flags = dm[3];
+ dm += 4;
+ /* 0x80 == reserved, 0x8 = assigned to us */
+ if ((flags & 0x80) || !(flags & 0x8))
+ continue;
+ nid = default_nid;
+ /* flags & 0x40 means associativity index is invalid */
+ if (min_common_depth > 0 && min_common_depth <= aalen &&
+ (flags & 0x40) == 0 && ai < aam) {
+ /* this is like of_node_to_nid_single */
+ nid = aa[ai * aalen + min_common_depth - 1];
+ if (nid == 0xffff || nid >= MAX_NUMNODES)
+ nid = default_nid;
+ }
+ node_set_online(nid);
+
+ size = numa_enforce_memory_limit(start, lmb_size);
+ if (!size)
+ continue;
+
+ add_active_range(nid, start >> PAGE_SHIFT,
+ (start >> PAGE_SHIFT) + (size >> PAGE_SHIFT));
+ }
+}
+
static int __init parse_numa_properties(void)
{
struct device_node *cpu = NULL;
@@ -385,6 +442,14 @@
goto new_range;
}
+ /*
+ * Now do the same thing for each LMB listed in the ibm,dynamic-memory
+ * property in the ibm,dynamic-reconfiguration-memory node.
+ */
+ memory = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
+ if (memory)
+ parse_drconf_memory(memory);
+
return 0;
}
diff --git a/arch/powerpc/platforms/52xx/lite5200.c b/arch/powerpc/platforms/52xx/lite5200.c
index a375c15..eaff71e 100644
--- a/arch/powerpc/platforms/52xx/lite5200.c
+++ b/arch/powerpc/platforms/52xx/lite5200.c
@@ -40,8 +40,6 @@
#include <asm/prom.h>
#include <asm/udbg.h>
#include <sysdev/fsl_soc.h>
-#include <asm/qe.h>
-#include <asm/qe_ic.h>
#include <asm/of_platform.h>
#include <asm/mpc52xx.h>
diff --git a/arch/powerpc/platforms/cell/cbe_thermal.c b/arch/powerpc/platforms/cell/cbe_thermal.c
index 616a0a3..70e0d96 100644
--- a/arch/powerpc/platforms/cell/cbe_thermal.c
+++ b/arch/powerpc/platforms/cell/cbe_thermal.c
@@ -115,6 +115,7 @@
static struct attribute *spu_attributes[] = {
&attr_spu_temperature.attr,
+ NULL,
};
static struct attribute_group spu_attribute_group = {
@@ -135,6 +136,7 @@
static struct attribute *ppe_attributes[] = {
&attr_ppe_temperature0.attr,
&attr_ppe_temperature1.attr,
+ NULL,
};
static struct attribute_group ppe_attribute_group = {
diff --git a/arch/powerpc/platforms/cell/pmu.c b/arch/powerpc/platforms/cell/pmu.c
index 99c6120..d04ae16 100644
--- a/arch/powerpc/platforms/cell/pmu.c
+++ b/arch/powerpc/platforms/cell/pmu.c
@@ -382,11 +382,14 @@
return IRQ_HANDLED;
}
-int __init cbe_init_pm_irq(void)
+static int __init cbe_init_pm_irq(void)
{
unsigned int irq;
int rc, node;
+ if (!machine_is(cell))
+ return 0;
+
for_each_node(node) {
irq = irq_create_mapping(NULL, IIC_IRQ_IOEX_PMI |
(node << IIC_IRQ_NODE_SHIFT));
diff --git a/arch/powerpc/platforms/cell/spufs/coredump.c b/arch/powerpc/platforms/cell/spufs/coredump.c
index 26945c4..725e195 100644
--- a/arch/powerpc/platforms/cell/spufs/coredump.c
+++ b/arch/powerpc/platforms/cell/spufs/coredump.c
@@ -147,7 +147,7 @@
struct fdtable *fdt = files_fdtable(current->files);
int size = 0, fd;
- for (fd = 0; fd < fdt->max_fdset && fd < fdt->max_fds; fd++) {
+ for (fd = 0; fd < fdt->max_fds; fd++) {
if (FD_ISSET(fd, fdt->open_fds)) {
struct file *file = fcheck(fd);
diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c
index 3a32ded..3f6a69f 100644
--- a/arch/powerpc/platforms/maple/pci.c
+++ b/arch/powerpc/platforms/maple/pci.c
@@ -562,7 +562,7 @@
for (np = NULL; (np = of_get_next_child(root, np)) != NULL;) {
if (np->name == NULL)
continue;
- if (strcmp(np->name, "pci") == 0) {
+ if (!strcmp(np->name, "pci") || !strcmp(np->name, "pcie")) {
if (add_bridge(np) == 0)
of_node_get(np);
}
diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c
index 094989d..f12d5c6 100644
--- a/arch/powerpc/platforms/maple/setup.c
+++ b/arch/powerpc/platforms/maple/setup.c
@@ -60,6 +60,7 @@
#include <asm/of_device.h>
#include <asm/lmb.h>
#include <asm/mpic.h>
+#include <asm/rtas.h>
#include <asm/udbg.h>
#include "maple.h"
@@ -166,6 +167,16 @@
};
#endif /* CONFIG_SMP */
+static void __init maple_use_rtas_reboot_and_halt_if_present(void)
+{
+ if (rtas_service_present("system-reboot") &&
+ rtas_service_present("power-off")) {
+ ppc_md.restart = rtas_restart;
+ ppc_md.power_off = rtas_power_off;
+ ppc_md.halt = rtas_halt;
+ }
+}
+
void __init maple_setup_arch(void)
{
/* init to some ~sane value until calibrate_delay() runs */
@@ -181,6 +192,7 @@
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
#endif
+ maple_use_rtas_reboot_and_halt_if_present();
printk(KERN_DEBUG "Using native/NAP idle loop\n");
}
diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig
index 451bfcd..de52ec4 100644
--- a/arch/powerpc/platforms/ps3/Kconfig
+++ b/arch/powerpc/platforms/ps3/Kconfig
@@ -40,4 +40,15 @@
If you have any doubt, choose the default y.
+config PS3_VUART
+ depends on PPC_PS3
+ bool "PS3 Virtual UART support"
+ default y
+ help
+ Include support for the PS3 Virtual UART.
+
+ This support is required for several system services
+ including the System Manager and AV Settings. In
+ general, all users will say Y.
+
endmenu
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index 997243a..69590fb 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -10,6 +10,8 @@
obj-$(CONFIG_SCANLOG) += scanlog.o
obj-$(CONFIG_EEH) += eeh.o eeh_cache.o eeh_driver.o eeh_event.o
+obj-$(CONFIG_HOTPLUG_CPU) += hotplug-cpu.o
+
obj-$(CONFIG_HVC_CONSOLE) += hvconsole.o
obj-$(CONFIG_HVCS) += hvcserver.o
obj-$(CONFIG_HCALL_STATS) += hvCall_inst.o
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 3c2d63e..da6e536 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -337,6 +337,7 @@
printk (KERN_ERR "EEH: Device driver ignored %d bad reads, panicing\n",
pdn->eeh_check_count);
dump_stack();
+ msleep(5000);
/* re-read the slot reset state */
if (read_slot_reset_state(pdn, rets) != 0)
diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c
index c2bc990..cbd6b07 100644
--- a/arch/powerpc/platforms/pseries/eeh_driver.c
+++ b/arch/powerpc/platforms/pseries/eeh_driver.c
@@ -170,14 +170,19 @@
static void eeh_report_resume(struct pci_dev *dev, void *userdata)
{
struct pci_driver *driver = dev->driver;
+ struct device_node *dn = pci_device_to_OF_node(dev);
dev->error_state = pci_channel_io_normal;
if (!driver)
return;
- if (!driver->err_handler)
- return;
- if (!driver->err_handler->resume)
+
+ if ((PCI_DN(dn)->eeh_mode) & EEH_MODE_IRQ_DISABLED) {
+ PCI_DN(dn)->eeh_mode &= ~EEH_MODE_IRQ_DISABLED;
+ enable_irq(dev->irq);
+ }
+ if (!driver->err_handler ||
+ !driver->err_handler->resume)
return;
driver->err_handler->resume(dev);
@@ -407,6 +412,8 @@
if (rc)
result = PCI_ERS_RESULT_NEED_RESET;
+ else
+ result = PCI_ERS_RESULT_RECOVERED;
}
/* If any device has a hard failure, then shut off everything. */
diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c
new file mode 100644
index 0000000..f460b9c
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c
@@ -0,0 +1,275 @@
+/*
+ * pseries CPU Hotplug infrastructure.
+ *
+ * Split out from arch/powerpc/platforms/pseries/setup.c
+ * arch/powerpc/kernel/rtas.c, and arch/powerpc/platforms/pseries/smp.c
+ *
+ * Peter Bergner, IBM March 2001.
+ * Copyright (C) 2001 IBM.
+ * Dave Engebretsen, Peter Bergner, and
+ * Mike Corrigan {engebret|bergner|mikec}@us.ibm.com
+ * Plus various changes from other IBM teams...
+ *
+ * Copyright (C) 2006 Michael Ellerman, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/cpu.h>
+#include <asm/system.h>
+#include <asm/prom.h>
+#include <asm/rtas.h>
+#include <asm/firmware.h>
+#include <asm/machdep.h>
+#include <asm/vdso_datapage.h>
+#include <asm/pSeries_reconfig.h>
+#include "xics.h"
+
+/* This version can't take the spinlock, because it never returns */
+static struct rtas_args rtas_stop_self_args = {
+ .token = RTAS_UNKNOWN_SERVICE,
+ .nargs = 0,
+ .nret = 1,
+ .rets = &rtas_stop_self_args.args[0],
+};
+
+static void rtas_stop_self(void)
+{
+ struct rtas_args *args = &rtas_stop_self_args;
+
+ local_irq_disable();
+
+ BUG_ON(args->token == RTAS_UNKNOWN_SERVICE);
+
+ printk("cpu %u (hwid %u) Ready to die...\n",
+ smp_processor_id(), hard_smp_processor_id());
+ enter_rtas(__pa(args));
+
+ panic("Alas, I survived.\n");
+}
+
+static void pseries_mach_cpu_die(void)
+{
+ local_irq_disable();
+ idle_task_exit();
+ xics_teardown_cpu(0);
+ rtas_stop_self();
+ /* Should never get here... */
+ BUG();
+ for(;;);
+}
+
+static int qcss_tok; /* query-cpu-stopped-state token */
+
+/* Get state of physical CPU.
+ * Return codes:
+ * 0 - The processor is in the RTAS stopped state
+ * 1 - stop-self is in progress
+ * 2 - The processor is not in the RTAS stopped state
+ * -1 - Hardware Error
+ * -2 - Hardware Busy, Try again later.
+ */
+static int query_cpu_stopped(unsigned int pcpu)
+{
+ int cpu_status, status;
+
+ status = rtas_call(qcss_tok, 1, 2, &cpu_status, pcpu);
+ if (status != 0) {
+ printk(KERN_ERR
+ "RTAS query-cpu-stopped-state failed: %i\n", status);
+ return status;
+ }
+
+ return cpu_status;
+}
+
+static int pseries_cpu_disable(void)
+{
+ int cpu = smp_processor_id();
+
+ cpu_clear(cpu, cpu_online_map);
+ vdso_data->processorCount--;
+
+ /*fix boot_cpuid here*/
+ if (cpu == boot_cpuid)
+ boot_cpuid = any_online_cpu(cpu_online_map);
+
+ /* FIXME: abstract this to not be platform specific later on */
+ xics_migrate_irqs_away();
+ return 0;
+}
+
+static void pseries_cpu_die(unsigned int cpu)
+{
+ int tries;
+ int cpu_status;
+ unsigned int pcpu = get_hard_smp_processor_id(cpu);
+
+ for (tries = 0; tries < 25; tries++) {
+ cpu_status = query_cpu_stopped(pcpu);
+ if (cpu_status == 0 || cpu_status == -1)
+ break;
+ msleep(200);
+ }
+ if (cpu_status != 0) {
+ printk("Querying DEAD? cpu %i (%i) shows %i\n",
+ cpu, pcpu, cpu_status);
+ }
+
+ /* Isolation and deallocation are definatly done by
+ * drslot_chrp_cpu. If they were not they would be
+ * done here. Change isolate state to Isolate and
+ * change allocation-state to Unusable.
+ */
+ paca[cpu].cpu_start = 0;
+}
+
+/*
+ * Update cpu_present_map and paca(s) for a new cpu node. The wrinkle
+ * here is that a cpu device node may represent up to two logical cpus
+ * in the SMT case. We must honor the assumption in other code that
+ * the logical ids for sibling SMT threads x and y are adjacent, such
+ * that x^1 == y and y^1 == x.
+ */
+static int pseries_add_processor(struct device_node *np)
+{
+ unsigned int cpu;
+ cpumask_t candidate_map, tmp = CPU_MASK_NONE;
+ int err = -ENOSPC, len, nthreads, i;
+ const u32 *intserv;
+
+ intserv = get_property(np, "ibm,ppc-interrupt-server#s", &len);
+ if (!intserv)
+ return 0;
+
+ nthreads = len / sizeof(u32);
+ for (i = 0; i < nthreads; i++)
+ cpu_set(i, tmp);
+
+ lock_cpu_hotplug();
+
+ BUG_ON(!cpus_subset(cpu_present_map, cpu_possible_map));
+
+ /* Get a bitmap of unoccupied slots. */
+ cpus_xor(candidate_map, cpu_possible_map, cpu_present_map);
+ if (cpus_empty(candidate_map)) {
+ /* If we get here, it most likely means that NR_CPUS is
+ * less than the partition's max processors setting.
+ */
+ printk(KERN_ERR "Cannot add cpu %s; this system configuration"
+ " supports %d logical cpus.\n", np->full_name,
+ cpus_weight(cpu_possible_map));
+ goto out_unlock;
+ }
+
+ while (!cpus_empty(tmp))
+ if (cpus_subset(tmp, candidate_map))
+ /* Found a range where we can insert the new cpu(s) */
+ break;
+ else
+ cpus_shift_left(tmp, tmp, nthreads);
+
+ if (cpus_empty(tmp)) {
+ printk(KERN_ERR "Unable to find space in cpu_present_map for"
+ " processor %s with %d thread(s)\n", np->name,
+ nthreads);
+ goto out_unlock;
+ }
+
+ for_each_cpu_mask(cpu, tmp) {
+ BUG_ON(cpu_isset(cpu, cpu_present_map));
+ cpu_set(cpu, cpu_present_map);
+ set_hard_smp_processor_id(cpu, *intserv++);
+ }
+ err = 0;
+out_unlock:
+ unlock_cpu_hotplug();
+ return err;
+}
+
+/*
+ * Update the present map for a cpu node which is going away, and set
+ * the hard id in the paca(s) to -1 to be consistent with boot time
+ * convention for non-present cpus.
+ */
+static void pseries_remove_processor(struct device_node *np)
+{
+ unsigned int cpu;
+ int len, nthreads, i;
+ const u32 *intserv;
+
+ intserv = get_property(np, "ibm,ppc-interrupt-server#s", &len);
+ if (!intserv)
+ return;
+
+ nthreads = len / sizeof(u32);
+
+ lock_cpu_hotplug();
+ for (i = 0; i < nthreads; i++) {
+ for_each_present_cpu(cpu) {
+ if (get_hard_smp_processor_id(cpu) != intserv[i])
+ continue;
+ BUG_ON(cpu_online(cpu));
+ cpu_clear(cpu, cpu_present_map);
+ set_hard_smp_processor_id(cpu, -1);
+ break;
+ }
+ if (cpu == NR_CPUS)
+ printk(KERN_WARNING "Could not find cpu to remove "
+ "with physical id 0x%x\n", intserv[i]);
+ }
+ unlock_cpu_hotplug();
+}
+
+static int pseries_smp_notifier(struct notifier_block *nb,
+ unsigned long action, void *node)
+{
+ int err = NOTIFY_OK;
+
+ switch (action) {
+ case PSERIES_RECONFIG_ADD:
+ if (pseries_add_processor(node))
+ err = NOTIFY_BAD;
+ break;
+ case PSERIES_RECONFIG_REMOVE:
+ pseries_remove_processor(node);
+ break;
+ default:
+ err = NOTIFY_DONE;
+ break;
+ }
+ return err;
+}
+
+static struct notifier_block pseries_smp_nb = {
+ .notifier_call = pseries_smp_notifier,
+};
+
+static int __init pseries_cpu_hotplug_init(void)
+{
+ rtas_stop_self_args.token = rtas_token("stop-self");
+ qcss_tok = rtas_token("query-cpu-stopped-state");
+
+ if (rtas_stop_self_args.token == RTAS_UNKNOWN_SERVICE ||
+ qcss_tok == RTAS_UNKNOWN_SERVICE) {
+ printk(KERN_INFO "CPU Hotplug not supported by firmware "
+ "- disabling.\n");
+ return 0;
+ }
+
+ ppc_md.cpu_die = pseries_mach_cpu_die;
+ smp_ops->cpu_disable = pseries_cpu_disable;
+ smp_ops->cpu_die = pseries_cpu_die;
+
+ /* Processors can be added/removed only on LPAR */
+ if (firmware_has_feature(FW_FEATURE_LPAR))
+ pSeries_reconfig_notifier_register(&pseries_smp_nb);
+
+ return 0;
+}
+arch_initcall(pseries_cpu_hotplug_init);
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 0dc2548..042ecae 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -347,21 +347,6 @@
}
arch_initcall(pSeries_init_panel);
-#ifdef CONFIG_HOTPLUG_CPU
-static void pSeries_mach_cpu_die(void)
-{
- local_irq_disable();
- idle_task_exit();
- xics_teardown_cpu(0);
- rtas_stop_self();
- /* Should never get here... */
- BUG();
- for(;;);
-}
-#else
-#define pSeries_mach_cpu_die NULL
-#endif
-
static int pseries_set_dabr(unsigned long dabr)
{
return plpar_hcall_norets(H_SET_DABR, dabr);
@@ -437,19 +422,14 @@
if (of_get_flat_dt_prop(node, "ibm,hypertas-functions", NULL) != NULL)
powerpc_firmware_features |= FW_FEATURE_LPAR;
- if (firmware_has_feature(FW_FEATURE_LPAR))
- hpte_init_lpar();
- else
- hpte_init_native();
-
return 1;
}
static int __init pSeries_probe(void)
{
unsigned long root = of_get_flat_dt_root();
- char *dtype = of_get_flat_dt_prop(of_get_flat_dt_root(),
- "device_type", NULL);
+ char *dtype = of_get_flat_dt_prop(root, "device_type", NULL);
+
if (dtype == NULL)
return 0;
if (strcmp(dtype, "chrp"))
@@ -467,6 +447,11 @@
/* Now try to figure out if we are running on LPAR */
of_scan_flat_dt(pSeries_probe_hypertas, NULL);
+ if (firmware_has_feature(FW_FEATURE_LPAR))
+ hpte_init_lpar();
+ else
+ hpte_init_native();
+
DBG("Machine is%s LPAR !\n",
(powerpc_firmware_features & FW_FEATURE_LPAR) ? "" : " not");
@@ -561,7 +546,6 @@
.power_off = rtas_power_off,
.halt = rtas_halt,
.panic = rtas_os_term,
- .cpu_die = pSeries_mach_cpu_die,
.get_boot_time = rtas_get_boot_time,
.get_rtc_time = rtas_get_rtc_time,
.set_rtc_time = rtas_set_rtc_time,
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index c6624b8..4408518 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -64,197 +64,6 @@
extern void generic_secondary_smp_init(unsigned long);
-#ifdef CONFIG_HOTPLUG_CPU
-
-/* Get state of physical CPU.
- * Return codes:
- * 0 - The processor is in the RTAS stopped state
- * 1 - stop-self is in progress
- * 2 - The processor is not in the RTAS stopped state
- * -1 - Hardware Error
- * -2 - Hardware Busy, Try again later.
- */
-static int query_cpu_stopped(unsigned int pcpu)
-{
- int cpu_status;
- int status, qcss_tok;
-
- qcss_tok = rtas_token("query-cpu-stopped-state");
- if (qcss_tok == RTAS_UNKNOWN_SERVICE)
- return -1;
- status = rtas_call(qcss_tok, 1, 2, &cpu_status, pcpu);
- if (status != 0) {
- printk(KERN_ERR
- "RTAS query-cpu-stopped-state failed: %i\n", status);
- return status;
- }
-
- return cpu_status;
-}
-
-static int pSeries_cpu_disable(void)
-{
- int cpu = smp_processor_id();
-
- cpu_clear(cpu, cpu_online_map);
- vdso_data->processorCount--;
-
- /*fix boot_cpuid here*/
- if (cpu == boot_cpuid)
- boot_cpuid = any_online_cpu(cpu_online_map);
-
- /* FIXME: abstract this to not be platform specific later on */
- xics_migrate_irqs_away();
- return 0;
-}
-
-static void pSeries_cpu_die(unsigned int cpu)
-{
- int tries;
- int cpu_status;
- unsigned int pcpu = get_hard_smp_processor_id(cpu);
-
- for (tries = 0; tries < 25; tries++) {
- cpu_status = query_cpu_stopped(pcpu);
- if (cpu_status == 0 || cpu_status == -1)
- break;
- msleep(200);
- }
- if (cpu_status != 0) {
- printk("Querying DEAD? cpu %i (%i) shows %i\n",
- cpu, pcpu, cpu_status);
- }
-
- /* Isolation and deallocation are definatly done by
- * drslot_chrp_cpu. If they were not they would be
- * done here. Change isolate state to Isolate and
- * change allocation-state to Unusable.
- */
- paca[cpu].cpu_start = 0;
-}
-
-/*
- * Update cpu_present_map and paca(s) for a new cpu node. The wrinkle
- * here is that a cpu device node may represent up to two logical cpus
- * in the SMT case. We must honor the assumption in other code that
- * the logical ids for sibling SMT threads x and y are adjacent, such
- * that x^1 == y and y^1 == x.
- */
-static int pSeries_add_processor(struct device_node *np)
-{
- unsigned int cpu;
- cpumask_t candidate_map, tmp = CPU_MASK_NONE;
- int err = -ENOSPC, len, nthreads, i;
- const u32 *intserv;
-
- intserv = get_property(np, "ibm,ppc-interrupt-server#s", &len);
- if (!intserv)
- return 0;
-
- nthreads = len / sizeof(u32);
- for (i = 0; i < nthreads; i++)
- cpu_set(i, tmp);
-
- lock_cpu_hotplug();
-
- BUG_ON(!cpus_subset(cpu_present_map, cpu_possible_map));
-
- /* Get a bitmap of unoccupied slots. */
- cpus_xor(candidate_map, cpu_possible_map, cpu_present_map);
- if (cpus_empty(candidate_map)) {
- /* If we get here, it most likely means that NR_CPUS is
- * less than the partition's max processors setting.
- */
- printk(KERN_ERR "Cannot add cpu %s; this system configuration"
- " supports %d logical cpus.\n", np->full_name,
- cpus_weight(cpu_possible_map));
- goto out_unlock;
- }
-
- while (!cpus_empty(tmp))
- if (cpus_subset(tmp, candidate_map))
- /* Found a range where we can insert the new cpu(s) */
- break;
- else
- cpus_shift_left(tmp, tmp, nthreads);
-
- if (cpus_empty(tmp)) {
- printk(KERN_ERR "Unable to find space in cpu_present_map for"
- " processor %s with %d thread(s)\n", np->name,
- nthreads);
- goto out_unlock;
- }
-
- for_each_cpu_mask(cpu, tmp) {
- BUG_ON(cpu_isset(cpu, cpu_present_map));
- cpu_set(cpu, cpu_present_map);
- set_hard_smp_processor_id(cpu, *intserv++);
- }
- err = 0;
-out_unlock:
- unlock_cpu_hotplug();
- return err;
-}
-
-/*
- * Update the present map for a cpu node which is going away, and set
- * the hard id in the paca(s) to -1 to be consistent with boot time
- * convention for non-present cpus.
- */
-static void pSeries_remove_processor(struct device_node *np)
-{
- unsigned int cpu;
- int len, nthreads, i;
- const u32 *intserv;
-
- intserv = get_property(np, "ibm,ppc-interrupt-server#s", &len);
- if (!intserv)
- return;
-
- nthreads = len / sizeof(u32);
-
- lock_cpu_hotplug();
- for (i = 0; i < nthreads; i++) {
- for_each_present_cpu(cpu) {
- if (get_hard_smp_processor_id(cpu) != intserv[i])
- continue;
- BUG_ON(cpu_online(cpu));
- cpu_clear(cpu, cpu_present_map);
- set_hard_smp_processor_id(cpu, -1);
- break;
- }
- if (cpu == NR_CPUS)
- printk(KERN_WARNING "Could not find cpu to remove "
- "with physical id 0x%x\n", intserv[i]);
- }
- unlock_cpu_hotplug();
-}
-
-static int pSeries_smp_notifier(struct notifier_block *nb, unsigned long action, void *node)
-{
- int err = NOTIFY_OK;
-
- switch (action) {
- case PSERIES_RECONFIG_ADD:
- if (pSeries_add_processor(node))
- err = NOTIFY_BAD;
- break;
- case PSERIES_RECONFIG_REMOVE:
- pSeries_remove_processor(node);
- break;
- default:
- err = NOTIFY_DONE;
- break;
- }
- return err;
-}
-
-static struct notifier_block pSeries_smp_nb = {
- .notifier_call = pSeries_smp_notifier,
-};
-
-#endif /* CONFIG_HOTPLUG_CPU */
-
/**
* smp_startup_cpu() - start the given cpu
*
@@ -422,15 +231,6 @@
DBG(" -> smp_init_pSeries()\n");
-#ifdef CONFIG_HOTPLUG_CPU
- smp_ops->cpu_disable = pSeries_cpu_disable;
- smp_ops->cpu_die = pSeries_cpu_die;
-
- /* Processors can be added/removed only on LPAR */
- if (firmware_has_feature(FW_FEATURE_LPAR))
- pSeries_reconfig_notifier_register(&pSeries_smp_nb);
-#endif
-
/* Mark threads which are still spinning in hold loops. */
if (cpu_has_feature(CPU_FTR_SMT)) {
for_each_present_cpu(i) {
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 6cc3459..04d4917 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -5,7 +5,8 @@
obj-$(CONFIG_MPIC) += mpic.o
obj-$(CONFIG_PPC_INDIRECT_PCI) += indirect_pci.o
obj-$(CONFIG_PPC_MPC106) += grackle.o
-obj-$(CONFIG_PPC_DCR) += dcr.o dcr-low.o
+obj-$(CONFIG_PPC_DCR) += dcr.o
+obj-$(CONFIG_PPC_DCR_NATIVE) += dcr-low.o
obj-$(CONFIG_U3_DART) += dart_iommu.o
obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o
obj-$(CONFIG_FSL_SOC) += fsl_soc.o
diff --git a/arch/powerpc/sysdev/dcr.S b/arch/powerpc/sysdev/dcr.S
deleted file mode 100644
index 2078f39..0000000
--- a/arch/powerpc/sysdev/dcr.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * "Indirect" DCR access
- *
- * Copyright (c) 2004 Eugene Surovegin <ebs@ebshome.net>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <asm/ppc_asm.h>
-#include <asm/processor.h>
-
-#define DCR_ACCESS_PROLOG(table) \
- rlwinm r3,r3,4,18,27; \
- lis r5,table@h; \
- ori r5,r5,table@l; \
- add r3,r3,r5; \
- mtctr r3; \
- bctr
-
-_GLOBAL(__mfdcr)
- DCR_ACCESS_PROLOG(__mfdcr_table)
-
-_GLOBAL(__mtdcr)
- DCR_ACCESS_PROLOG(__mtdcr_table)
-
-__mfdcr_table:
- mfdcr r3,0; blr
-__mtdcr_table:
- mtdcr 0,r4; blr
-
-dcr = 1
- .rept 1023
- mfdcr r3,dcr; blr
- mtdcr dcr,r4; blr
- dcr = dcr + 1
- .endr
diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c
index 6995f51..74e48d9 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_ic.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c
@@ -223,23 +223,15 @@
qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
temp & ~qe_ic_info[src].mask);
- spin_unlock_irqrestore(&qe_ic_lock, flags);
-}
-
-static void qe_ic_mask_irq_and_ack(unsigned int virq)
-{
- struct qe_ic *qe_ic = qe_ic_from_irq(virq);
- unsigned int src = virq_to_hw(virq);
- unsigned long flags;
- u32 temp;
-
- spin_lock_irqsave(&qe_ic_lock, flags);
-
- temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
- qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
- temp & ~qe_ic_info[src].mask);
-
- /* There is nothing to do for ack here, ack is handled in ISR */
+ /* Flush the above write before enabling interrupts; otherwise,
+ * spurious interrupts will sometimes happen. To be 100% sure
+ * that the write has reached the device before interrupts are
+ * enabled, the mask register would have to be read back; however,
+ * this is not required for correctness, only to avoid wasting
+ * time on a large number of spurious interrupts. In testing,
+ * a sync reduced the observed spurious interrupts to zero.
+ */
+ mb();
spin_unlock_irqrestore(&qe_ic_lock, flags);
}
@@ -248,7 +240,7 @@
.typename = " QEIC ",
.unmask = qe_ic_unmask_irq,
.mask = qe_ic_mask_irq,
- .mask_ack = qe_ic_mask_irq_and_ack,
+ .mask_ack = qe_ic_mask_irq,
};
static int qe_ic_host_match(struct irq_host *h, struct device_node *node)
@@ -331,34 +323,22 @@
return irq_linear_revmap(qe_ic->irqhost, irq);
}
-/* FIXME: We mask all the QE Low interrupts while handling. We should
- * let other interrupt come in, but BAD interrupts are generated */
void fastcall qe_ic_cascade_low(unsigned int irq, struct irq_desc *desc)
{
struct qe_ic *qe_ic = desc->handler_data;
- struct irq_chip *chip = irq_desc[irq].chip;
-
unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic);
- chip->mask_ack(irq);
if (cascade_irq != NO_IRQ)
generic_handle_irq(cascade_irq);
- chip->unmask(irq);
}
-/* FIXME: We mask all the QE High interrupts while handling. We should
- * let other interrupt come in, but BAD interrupts are generated */
void fastcall qe_ic_cascade_high(unsigned int irq, struct irq_desc *desc)
{
struct qe_ic *qe_ic = desc->handler_data;
- struct irq_chip *chip = irq_desc[irq].chip;
-
unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic);
- chip->mask_ack(irq);
if (cascade_irq != NO_IRQ)
generic_handle_irq(cascade_irq);
- chip->unmask(irq);
}
void __init qe_ic_init(struct device_node *node, unsigned int flags)
diff --git a/arch/powerpc/sysdev/rom.c b/arch/powerpc/sysdev/rom.c
index bf5b3f1..c855a3b 100644
--- a/arch/powerpc/sysdev/rom.c
+++ b/arch/powerpc/sysdev/rom.c
@@ -9,6 +9,7 @@
#include <linux/kernel.h>
#include <asm/of_device.h>
+#include <asm/of_platform.h>
static int __init powerpc_flash_init(void)
{
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index a34ed49..77540a2 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -22,6 +22,7 @@
#include <linux/sysrq.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/bug.h>
#include <asm/ptrace.h>
#include <asm/string.h>
@@ -35,7 +36,6 @@
#include <asm/cputable.h>
#include <asm/rtas.h>
#include <asm/sstep.h>
-#include <asm/bug.h>
#include <asm/irq_regs.h>
#include <asm/spu.h>
#include <asm/spu_priv1.h>
@@ -1346,7 +1346,7 @@
static void print_bug_trap(struct pt_regs *regs)
{
- struct bug_entry *bug;
+ const struct bug_entry *bug;
unsigned long addr;
if (regs->msr & MSR_PR)
@@ -1357,11 +1357,11 @@
bug = find_bug(regs->nip);
if (bug == NULL)
return;
- if (bug->line & BUG_WARNING_TRAP)
+ if (is_warning_bug(bug))
return;
- printf("kernel BUG in %s at %s:%d!\n",
- bug->function, bug->file, (unsigned int)bug->line);
+ printf("kernel BUG at %s:%u!\n",
+ bug->file, bug->line);
}
void excprint(struct pt_regs *fp)
diff --git a/arch/ppc/kernel/pci.c b/arch/ppc/kernel/pci.c
index 63808e0..5e723c4 100644
--- a/arch/ppc/kernel/pci.c
+++ b/arch/ppc/kernel/pci.c
@@ -879,7 +879,7 @@
static struct resource *__pci_mmap_make_offset(struct pci_dev *dev,
- unsigned long *offset,
+ resource_size_t *offset,
enum pci_mmap_state mmap_state)
{
struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
@@ -891,7 +891,9 @@
/* If memory, add on the PCI bridge address offset */
if (mmap_state == pci_mmap_mem) {
+#if 0 /* See comment in pci_resource_to_user() for why this is disabled */
*offset += hose->pci_mem_offset;
+#endif
res_bit = IORESOURCE_MEM;
} else {
io_offset = hose->io_base_virt - ___IO_BASE;
@@ -1030,7 +1032,7 @@
enum pci_mmap_state mmap_state,
int write_combine)
{
- unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
+ resource_size_t offset = vma->vm_pgoff << PAGE_SHIFT;
struct resource *rp;
int ret;
@@ -1132,21 +1134,42 @@
resource_size_t *start, resource_size_t *end)
{
struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
- unsigned long offset = 0;
+ resource_size_t offset = 0;
if (hose == NULL)
return;
if (rsrc->flags & IORESOURCE_IO)
- offset = ___IO_BASE - hose->io_base_virt + hose->io_base_phys;
+ offset = (unsigned long)hose->io_base_virt - _IO_BASE;
- *start = rsrc->start + offset;
- *end = rsrc->end + offset;
+ /* We pass a fully fixed up address to userland for MMIO instead of
+ * a BAR value because X is lame and expects to be able to use that
+ * to pass to /dev/mem !
+ *
+ * That means that we'll have potentially 64 bits values where some
+ * userland apps only expect 32 (like X itself since it thinks only
+ * Sparc has 64 bits MMIO) but if we don't do that, we break it on
+ * 32 bits CHRPs :-(
+ *
+ * Hopefully, the sysfs insterface is immune to that gunk. Once X
+ * has been fixed (and the fix spread enough), we can re-enable the
+ * 2 lines below and pass down a BAR value to userland. In that case
+ * we'll also have to re-enable the matching code in
+ * __pci_mmap_make_offset().
+ *
+ * BenH.
+ */
+#if 0
+ else if (rsrc->flags & IORESOURCE_MEM)
+ offset = hose->pci_mem_offset;
+#endif
+
+ *start = rsrc->start - offset;
+ *end = rsrc->end - offset;
}
-void __init
-pci_init_resource(struct resource *res, unsigned long start, unsigned long end,
- int flags, char *name)
+void __init pci_init_resource(struct resource *res, resource_size_t start,
+ resource_size_t end, int flags, char *name)
{
res->start = start;
res->end = end;
diff --git a/drivers/ps3/Makefile b/drivers/ps3/Makefile
index b52d547..8433eb7 100644
--- a/drivers/ps3/Makefile
+++ b/drivers/ps3/Makefile
@@ -1 +1,2 @@
obj-y += system-bus.o
+obj-$(CONFIG_PS3_VUART) += vuart.o
diff --git a/drivers/ps3/vuart.c b/drivers/ps3/vuart.c
new file mode 100644
index 0000000..6974f65
--- /dev/null
+++ b/drivers/ps3/vuart.c
@@ -0,0 +1,965 @@
+/*
+ * PS3 virtual uart
+ *
+ * Copyright (C) 2006 Sony Computer Entertainment Inc.
+ * Copyright 2006 Sony Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <asm/ps3.h>
+
+#include <asm/lv1call.h>
+#include <asm/bitops.h>
+
+#include "vuart.h"
+
+MODULE_AUTHOR("Sony Corporation");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("ps3 vuart");
+
+/**
+ * vuart - An inter-partition data link service.
+ * port 0: PS3 AV Settings.
+ * port 2: PS3 System Manager.
+ *
+ * The vuart provides a bi-directional byte stream data link between logical
+ * partitions. Its primary role is as a communications link between the guest
+ * OS and the system policy module. The current HV does not support any
+ * connections other than those listed.
+ */
+
+enum {PORT_COUNT = 3,};
+
+enum vuart_param {
+ PARAM_TX_TRIGGER = 0,
+ PARAM_RX_TRIGGER = 1,
+ PARAM_INTERRUPT_MASK = 2,
+ PARAM_RX_BUF_SIZE = 3, /* read only */
+ PARAM_RX_BYTES = 4, /* read only */
+ PARAM_TX_BUF_SIZE = 5, /* read only */
+ PARAM_TX_BYTES = 6, /* read only */
+ PARAM_INTERRUPT_STATUS = 7, /* read only */
+};
+
+enum vuart_interrupt_bit {
+ INTERRUPT_BIT_TX = 0,
+ INTERRUPT_BIT_RX = 1,
+ INTERRUPT_BIT_DISCONNECT = 2,
+};
+
+enum vuart_interrupt_mask {
+ INTERRUPT_MASK_TX = 1,
+ INTERRUPT_MASK_RX = 2,
+ INTERRUPT_MASK_DISCONNECT = 4,
+};
+
+/**
+ * struct ports_bmp - bitmap indicating ports needing service.
+ *
+ * A 256 bit read only bitmap indicating ports needing service. Do not write
+ * to these bits. Must not cross a page boundary.
+ */
+
+struct ports_bmp {
+ u64 status;
+ u64 unused[3];
+} __attribute__ ((aligned (32)));
+
+/* redefine dev_dbg to do a syntax check */
+
+#if !defined(DEBUG)
+#undef dev_dbg
+static inline int __attribute__ ((format (printf, 2, 3))) dev_dbg(
+ const struct device *_dev, const char *fmt, ...) {return 0;}
+#endif
+
+#define dump_ports_bmp(_b) _dump_ports_bmp(_b, __func__, __LINE__)
+static void __attribute__ ((unused)) _dump_ports_bmp(
+ const struct ports_bmp* bmp, const char* func, int line)
+{
+ pr_debug("%s:%d: ports_bmp: %016lxh\n", func, line, bmp->status);
+}
+
+static int ps3_vuart_match_id_to_port(enum ps3_match_id match_id,
+ unsigned int *port_number)
+{
+ switch(match_id) {
+ case PS3_MATCH_ID_AV_SETTINGS:
+ *port_number = 0;
+ return 0;
+ case PS3_MATCH_ID_SYSTEM_MANAGER:
+ *port_number = 2;
+ return 0;
+ default:
+ WARN_ON(1);
+ *port_number = UINT_MAX;
+ return -EINVAL;
+ };
+}
+
+#define dump_port_params(_b) _dump_port_params(_b, __func__, __LINE__)
+static void __attribute__ ((unused)) _dump_port_params(unsigned int port_number,
+ const char* func, int line)
+{
+#if defined(DEBUG)
+ static const char *strings[] = {
+ "tx_trigger ",
+ "rx_trigger ",
+ "interrupt_mask ",
+ "rx_buf_size ",
+ "rx_bytes ",
+ "tx_buf_size ",
+ "tx_bytes ",
+ "interrupt_status",
+ };
+ int result;
+ unsigned int i;
+ u64 value;
+
+ for (i = 0; i < ARRAY_SIZE(strings); i++) {
+ result = lv1_get_virtual_uart_param(port_number, i, &value);
+
+ if (result) {
+ pr_debug("%s:%d: port_%u: %s failed: %s\n", func, line,
+ port_number, strings[i], ps3_result(result));
+ continue;
+ }
+ pr_debug("%s:%d: port_%u: %s = %lxh\n",
+ func, line, port_number, strings[i], value);
+ }
+#endif
+}
+
+struct vuart_triggers {
+ unsigned long rx;
+ unsigned long tx;
+};
+
+int ps3_vuart_get_triggers(struct ps3_vuart_port_device *dev,
+ struct vuart_triggers *trig)
+{
+ int result;
+ unsigned long size;
+ unsigned long val;
+
+ result = lv1_get_virtual_uart_param(dev->port_number,
+ PARAM_TX_TRIGGER, &trig->tx);
+
+ if (result) {
+ dev_dbg(&dev->core, "%s:%d: tx_trigger failed: %s\n",
+ __func__, __LINE__, ps3_result(result));
+ return result;
+ }
+
+ result = lv1_get_virtual_uart_param(dev->port_number,
+ PARAM_RX_BUF_SIZE, &size);
+
+ if (result) {
+ dev_dbg(&dev->core, "%s:%d: tx_buf_size failed: %s\n",
+ __func__, __LINE__, ps3_result(result));
+ return result;
+ }
+
+ result = lv1_get_virtual_uart_param(dev->port_number,
+ PARAM_RX_TRIGGER, &val);
+
+ if (result) {
+ dev_dbg(&dev->core, "%s:%d: rx_trigger failed: %s\n",
+ __func__, __LINE__, ps3_result(result));
+ return result;
+ }
+
+ trig->rx = size - val;
+
+ dev_dbg(&dev->core, "%s:%d: tx %lxh, rx %lxh\n", __func__, __LINE__,
+ trig->tx, trig->rx);
+
+ return result;
+}
+
+int ps3_vuart_set_triggers(struct ps3_vuart_port_device *dev, unsigned int tx,
+ unsigned int rx)
+{
+ int result;
+ unsigned long size;
+
+ result = lv1_set_virtual_uart_param(dev->port_number,
+ PARAM_TX_TRIGGER, tx);
+
+ if (result) {
+ dev_dbg(&dev->core, "%s:%d: tx_trigger failed: %s\n",
+ __func__, __LINE__, ps3_result(result));
+ return result;
+ }
+
+ result = lv1_get_virtual_uart_param(dev->port_number,
+ PARAM_RX_BUF_SIZE, &size);
+
+ if (result) {
+ dev_dbg(&dev->core, "%s:%d: tx_buf_size failed: %s\n",
+ __func__, __LINE__, ps3_result(result));
+ return result;
+ }
+
+ result = lv1_set_virtual_uart_param(dev->port_number,
+ PARAM_RX_TRIGGER, size - rx);
+
+ if (result) {
+ dev_dbg(&dev->core, "%s:%d: rx_trigger failed: %s\n",
+ __func__, __LINE__, ps3_result(result));
+ return result;
+ }
+
+ dev_dbg(&dev->core, "%s:%d: tx %xh, rx %xh\n", __func__, __LINE__,
+ tx, rx);
+
+ return result;
+}
+
+static int ps3_vuart_get_rx_bytes_waiting(struct ps3_vuart_port_device *dev,
+ unsigned long *bytes_waiting)
+{
+ int result = lv1_get_virtual_uart_param(dev->port_number,
+ PARAM_RX_BYTES, bytes_waiting);
+
+ if (result)
+ dev_dbg(&dev->core, "%s:%d: rx_bytes failed: %s\n",
+ __func__, __LINE__, ps3_result(result));
+
+ dev_dbg(&dev->core, "%s:%d: %lxh\n", __func__, __LINE__,
+ *bytes_waiting);
+ return result;
+}
+
+static int ps3_vuart_set_interrupt_mask(struct ps3_vuart_port_device *dev,
+ unsigned long mask)
+{
+ int result;
+
+ dev_dbg(&dev->core, "%s:%d: %lxh\n", __func__, __LINE__, mask);
+
+ dev->interrupt_mask = mask;
+
+ result = lv1_set_virtual_uart_param(dev->port_number,
+ PARAM_INTERRUPT_MASK, dev->interrupt_mask);
+
+ if (result)
+ dev_dbg(&dev->core, "%s:%d: interrupt_mask failed: %s\n",
+ __func__, __LINE__, ps3_result(result));
+
+ return result;
+}
+
+static int ps3_vuart_get_interrupt_mask(struct ps3_vuart_port_device *dev,
+ unsigned long *status)
+{
+ int result = lv1_get_virtual_uart_param(dev->port_number,
+ PARAM_INTERRUPT_STATUS, status);
+
+ if (result)
+ dev_dbg(&dev->core, "%s:%d: interrupt_status failed: %s\n",
+ __func__, __LINE__, ps3_result(result));
+
+ dev_dbg(&dev->core, "%s:%d: m %lxh, s %lxh, m&s %lxh\n",
+ __func__, __LINE__, dev->interrupt_mask, *status,
+ dev->interrupt_mask & *status);
+
+ return result;
+}
+
+int ps3_vuart_enable_interrupt_tx(struct ps3_vuart_port_device *dev)
+{
+ return (dev->interrupt_mask & INTERRUPT_MASK_TX) ? 0
+ : ps3_vuart_set_interrupt_mask(dev, dev->interrupt_mask
+ | INTERRUPT_MASK_TX);
+}
+
+int ps3_vuart_enable_interrupt_rx(struct ps3_vuart_port_device *dev)
+{
+ return (dev->interrupt_mask & INTERRUPT_MASK_RX) ? 0
+ : ps3_vuart_set_interrupt_mask(dev, dev->interrupt_mask
+ | INTERRUPT_MASK_RX);
+}
+
+int ps3_vuart_enable_interrupt_disconnect(struct ps3_vuart_port_device *dev)
+{
+ return (dev->interrupt_mask & INTERRUPT_MASK_DISCONNECT) ? 0
+ : ps3_vuart_set_interrupt_mask(dev, dev->interrupt_mask
+ | INTERRUPT_MASK_DISCONNECT);
+}
+
+int ps3_vuart_disable_interrupt_tx(struct ps3_vuart_port_device *dev)
+{
+ return (dev->interrupt_mask & INTERRUPT_MASK_TX)
+ ? ps3_vuart_set_interrupt_mask(dev, dev->interrupt_mask
+ & ~INTERRUPT_MASK_TX) : 0;
+}
+
+int ps3_vuart_disable_interrupt_rx(struct ps3_vuart_port_device *dev)
+{
+ return (dev->interrupt_mask & INTERRUPT_MASK_RX)
+ ? ps3_vuart_set_interrupt_mask(dev, dev->interrupt_mask
+ & ~INTERRUPT_MASK_RX) : 0;
+}
+
+int ps3_vuart_disable_interrupt_disconnect(struct ps3_vuart_port_device *dev)
+{
+ return (dev->interrupt_mask & INTERRUPT_MASK_DISCONNECT)
+ ? ps3_vuart_set_interrupt_mask(dev, dev->interrupt_mask
+ & ~INTERRUPT_MASK_DISCONNECT) : 0;
+}
+
+/**
+ * ps3_vuart_raw_write - Low level write helper.
+ *
+ * Do not call ps3_vuart_raw_write directly, use ps3_vuart_write.
+ */
+
+static int ps3_vuart_raw_write(struct ps3_vuart_port_device *dev,
+ const void* buf, unsigned int bytes, unsigned long *bytes_written)
+{
+ int result;
+
+ dev_dbg(&dev->core, "%s:%d: %xh\n", __func__, __LINE__, bytes);
+
+ result = lv1_write_virtual_uart(dev->port_number,
+ ps3_mm_phys_to_lpar(__pa(buf)), bytes, bytes_written);
+
+ if (result) {
+ dev_dbg(&dev->core, "%s:%d: lv1_write_virtual_uart failed: "
+ "%s\n", __func__, __LINE__, ps3_result(result));
+ return result;
+ }
+
+ dev->stats.bytes_written += *bytes_written;
+
+ dev_dbg(&dev->core, "%s:%d: wrote %lxh/%xh=>%lxh\n", __func__,
+ __LINE__, *bytes_written, bytes, dev->stats.bytes_written);
+
+ return result;
+}
+
+/**
+ * ps3_vuart_raw_read - Low level read helper.
+ *
+ * Do not call ps3_vuart_raw_read directly, use ps3_vuart_read.
+ */
+
+static int ps3_vuart_raw_read(struct ps3_vuart_port_device *dev, void* buf,
+ unsigned int bytes, unsigned long *bytes_read)
+{
+ int result;
+
+ dev_dbg(&dev->core, "%s:%d: %xh\n", __func__, __LINE__, bytes);
+
+ result = lv1_read_virtual_uart(dev->port_number,
+ ps3_mm_phys_to_lpar(__pa(buf)), bytes, bytes_read);
+
+ if (result) {
+ dev_dbg(&dev->core, "%s:%d: lv1_read_virtual_uart failed: %s\n",
+ __func__, __LINE__, ps3_result(result));
+ return result;
+ }
+
+ dev->stats.bytes_read += *bytes_read;
+
+ dev_dbg(&dev->core, "%s:%d: read %lxh/%xh=>%lxh\n", __func__, __LINE__,
+ *bytes_read, bytes, dev->stats.bytes_read);
+
+ return result;
+}
+
+/**
+ * struct list_buffer - An element for a port device fifo buffer list.
+ */
+
+struct list_buffer {
+ struct list_head link;
+ const unsigned char *head;
+ const unsigned char *tail;
+ unsigned long dbg_number;
+ unsigned char data[];
+};
+
+/**
+ * ps3_vuart_write - the entry point for writing data to a port
+ *
+ * If the port is idle on entry as much of the incoming data is written to
+ * the port as the port will accept. Otherwise a list buffer is created
+ * and any remaning incoming data is copied to that buffer. The buffer is
+ * then enqueued for transmision via the transmit interrupt.
+ */
+
+int ps3_vuart_write(struct ps3_vuart_port_device *dev, const void* buf,
+ unsigned int bytes)
+{
+ static unsigned long dbg_number;
+ int result;
+ unsigned long flags;
+ struct list_buffer *lb;
+
+ dev_dbg(&dev->core, "%s:%d: %u(%xh) bytes\n", __func__, __LINE__,
+ bytes, bytes);
+
+ spin_lock_irqsave(&dev->tx_list.lock, flags);
+
+ if (list_empty(&dev->tx_list.head)) {
+ unsigned long bytes_written;
+
+ result = ps3_vuart_raw_write(dev, buf, bytes, &bytes_written);
+
+ spin_unlock_irqrestore(&dev->tx_list.lock, flags);
+
+ if (result) {
+ dev_dbg(&dev->core,
+ "%s:%d: ps3_vuart_raw_write failed\n",
+ __func__, __LINE__);
+ return result;
+ }
+
+ if (bytes_written == bytes) {
+ dev_dbg(&dev->core, "%s:%d: wrote %xh bytes\n",
+ __func__, __LINE__, bytes);
+ return 0;
+ }
+
+ bytes -= bytes_written;
+ buf += bytes_written;
+ } else
+ spin_unlock_irqrestore(&dev->tx_list.lock, flags);
+
+ lb = kmalloc(sizeof(struct list_buffer) + bytes, GFP_KERNEL);
+
+ if (!lb) {
+ return -ENOMEM;
+ }
+
+ memcpy(lb->data, buf, bytes);
+ lb->head = lb->data;
+ lb->tail = lb->data + bytes;
+ lb->dbg_number = ++dbg_number;
+
+ spin_lock_irqsave(&dev->tx_list.lock, flags);
+ list_add_tail(&lb->link, &dev->tx_list.head);
+ ps3_vuart_enable_interrupt_tx(dev);
+ spin_unlock_irqrestore(&dev->tx_list.lock, flags);
+
+ dev_dbg(&dev->core, "%s:%d: queued buf_%lu, %xh bytes\n",
+ __func__, __LINE__, lb->dbg_number, bytes);
+
+ return 0;
+}
+
+/**
+ * ps3_vuart_read - the entry point for reading data from a port
+ *
+ * If enough bytes to satisfy the request are held in the buffer list those
+ * bytes are dequeued and copied to the caller's buffer. Emptied list buffers
+ * are retiered. If the request cannot be statified by bytes held in the list
+ * buffers -EAGAIN is returned.
+ */
+
+int ps3_vuart_read(struct ps3_vuart_port_device *dev, void* buf,
+ unsigned int bytes)
+{
+ unsigned long flags;
+ struct list_buffer *lb, *n;
+ unsigned long bytes_read;
+
+ dev_dbg(&dev->core, "%s:%d: %u(%xh) bytes\n", __func__, __LINE__,
+ bytes, bytes);
+
+ spin_lock_irqsave(&dev->rx_list.lock, flags);
+
+ if (dev->rx_list.bytes_held < bytes) {
+ spin_unlock_irqrestore(&dev->rx_list.lock, flags);
+ dev_dbg(&dev->core, "%s:%d: starved for %lxh bytes\n",
+ __func__, __LINE__, bytes - dev->rx_list.bytes_held);
+ return -EAGAIN;
+ }
+
+ list_for_each_entry_safe(lb, n, &dev->rx_list.head, link) {
+ bytes_read = min((unsigned int)(lb->tail - lb->head), bytes);
+
+ memcpy(buf, lb->head, bytes_read);
+ buf += bytes_read;
+ bytes -= bytes_read;
+ dev->rx_list.bytes_held -= bytes_read;
+
+ if (bytes_read < lb->tail - lb->head) {
+ lb->head += bytes_read;
+ spin_unlock_irqrestore(&dev->rx_list.lock, flags);
+
+ dev_dbg(&dev->core,
+ "%s:%d: dequeued buf_%lu, %lxh bytes\n",
+ __func__, __LINE__, lb->dbg_number, bytes_read);
+ return 0;
+ }
+
+ dev_dbg(&dev->core, "%s:%d free buf_%lu\n", __func__, __LINE__,
+ lb->dbg_number);
+
+ list_del(&lb->link);
+ kfree(lb);
+ }
+ spin_unlock_irqrestore(&dev->rx_list.lock, flags);
+
+ dev_dbg(&dev->core, "%s:%d: dequeued buf_%lu, %xh bytes\n",
+ __func__, __LINE__, lb->dbg_number, bytes);
+
+ return 0;
+}
+
+/**
+ * ps3_vuart_handle_interrupt_tx - third stage transmit interrupt handler
+ *
+ * Services the transmit interrupt for the port. Writes as much data from the
+ * buffer list as the port will accept. Retires any emptied list buffers and
+ * adjusts the final list buffer state for a partial write.
+ */
+
+static int ps3_vuart_handle_interrupt_tx(struct ps3_vuart_port_device *dev)
+{
+ int result = 0;
+ unsigned long flags;
+ struct list_buffer *lb, *n;
+ unsigned long bytes_total = 0;
+
+ dev_dbg(&dev->core, "%s:%d\n", __func__, __LINE__);
+
+ spin_lock_irqsave(&dev->tx_list.lock, flags);
+
+ list_for_each_entry_safe(lb, n, &dev->tx_list.head, link) {
+
+ unsigned long bytes_written;
+
+ result = ps3_vuart_raw_write(dev, lb->head, lb->tail - lb->head,
+ &bytes_written);
+
+ if (result) {
+ dev_dbg(&dev->core,
+ "%s:%d: ps3_vuart_raw_write failed\n",
+ __func__, __LINE__);
+ break;
+ }
+
+ bytes_total += bytes_written;
+
+ if (bytes_written < lb->tail - lb->head) {
+ lb->head += bytes_written;
+ dev_dbg(&dev->core,
+ "%s:%d cleared buf_%lu, %lxh bytes\n",
+ __func__, __LINE__, lb->dbg_number,
+ bytes_written);
+ goto port_full;
+ }
+
+ dev_dbg(&dev->core, "%s:%d free buf_%lu\n", __func__, __LINE__,
+ lb->dbg_number);
+
+ list_del(&lb->link);
+ kfree(lb);
+ }
+
+ ps3_vuart_disable_interrupt_tx(dev);
+port_full:
+ spin_unlock_irqrestore(&dev->tx_list.lock, flags);
+ dev_dbg(&dev->core, "%s:%d wrote %lxh bytes total\n",
+ __func__, __LINE__, bytes_total);
+ return result;
+}
+
+/**
+ * ps3_vuart_handle_interrupt_rx - third stage receive interrupt handler
+ *
+ * Services the receive interrupt for the port. Creates a list buffer and
+ * copies all waiting port data to that buffer and enqueues the buffer in the
+ * buffer list. Buffer list data is dequeued via ps3_vuart_read.
+ */
+
+static int ps3_vuart_handle_interrupt_rx(struct ps3_vuart_port_device *dev)
+{
+ static unsigned long dbg_number;
+ int result = 0;
+ unsigned long flags;
+ struct list_buffer *lb;
+ unsigned long bytes;
+
+ dev_dbg(&dev->core, "%s:%d\n", __func__, __LINE__);
+
+ result = ps3_vuart_get_rx_bytes_waiting(dev, &bytes);
+
+ if (result)
+ return -EIO;
+
+ BUG_ON(!bytes);
+
+ /* add some extra space for recently arrived data */
+
+ bytes += 128;
+
+ lb = kmalloc(sizeof(struct list_buffer) + bytes, GFP_ATOMIC);
+
+ if (!lb)
+ return -ENOMEM;
+
+ ps3_vuart_raw_read(dev, lb->data, bytes, &bytes);
+
+ lb->head = lb->data;
+ lb->tail = lb->data + bytes;
+ lb->dbg_number = ++dbg_number;
+
+ spin_lock_irqsave(&dev->rx_list.lock, flags);
+ list_add_tail(&lb->link, &dev->rx_list.head);
+ dev->rx_list.bytes_held += bytes;
+ spin_unlock_irqrestore(&dev->rx_list.lock, flags);
+
+ dev_dbg(&dev->core, "%s:%d: queued buf_%lu, %lxh bytes\n",
+ __func__, __LINE__, lb->dbg_number, bytes);
+
+ return 0;
+}
+
+static int ps3_vuart_handle_interrupt_disconnect(
+ struct ps3_vuart_port_device *dev)
+{
+ dev_dbg(&dev->core, "%s:%d\n", __func__, __LINE__);
+ BUG_ON("no support");
+ return -1;
+}
+
+/**
+ * ps3_vuart_handle_port_interrupt - second stage interrupt handler
+ *
+ * Services any pending interrupt types for the port. Passes control to the
+ * third stage type specific interrupt handler. Returns control to the first
+ * stage handler after one iteration.
+ */
+
+static int ps3_vuart_handle_port_interrupt(struct ps3_vuart_port_device *dev)
+{
+ int result;
+ unsigned long status;
+
+ result = ps3_vuart_get_interrupt_mask(dev, &status);
+
+ if (result)
+ return result;
+
+ dev_dbg(&dev->core, "%s:%d: status: %lxh\n", __func__, __LINE__,
+ status);
+
+ if (status & INTERRUPT_MASK_DISCONNECT) {
+ dev->stats.disconnect_interrupts++;
+ result = ps3_vuart_handle_interrupt_disconnect(dev);
+ if (result)
+ ps3_vuart_disable_interrupt_disconnect(dev);
+ }
+
+ if (status & INTERRUPT_MASK_TX) {
+ dev->stats.tx_interrupts++;
+ result = ps3_vuart_handle_interrupt_tx(dev);
+ if (result)
+ ps3_vuart_disable_interrupt_tx(dev);
+ }
+
+ if (status & INTERRUPT_MASK_RX) {
+ dev->stats.rx_interrupts++;
+ result = ps3_vuart_handle_interrupt_rx(dev);
+ if (result)
+ ps3_vuart_disable_interrupt_rx(dev);
+ }
+
+ return 0;
+}
+
+struct vuart_private {
+ unsigned int in_use;
+ unsigned int virq;
+ struct ps3_vuart_port_device *devices[PORT_COUNT];
+ const struct ports_bmp bmp;
+};
+
+/**
+ * ps3_vuart_irq_handler - first stage interrupt handler
+ *
+ * Loops finding any interrupting port and its associated instance data.
+ * Passes control to the second stage port specific interrupt handler. Loops
+ * until all outstanding interrupts are serviced.
+ */
+
+static irqreturn_t ps3_vuart_irq_handler(int irq, void *_private)
+{
+ struct vuart_private *private;
+
+ BUG_ON(!_private);
+ private = (struct vuart_private *)_private;
+
+ while (1) {
+ unsigned int port;
+
+ dump_ports_bmp(&private->bmp);
+
+ port = (BITS_PER_LONG - 1) - __ilog2(private->bmp.status);
+
+ if (port == BITS_PER_LONG)
+ break;
+
+ BUG_ON(port >= PORT_COUNT);
+ BUG_ON(!private->devices[port]);
+
+ ps3_vuart_handle_port_interrupt(private->devices[port]);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int ps3_vuart_match(struct device *_dev, struct device_driver *_drv)
+{
+ int result;
+ struct ps3_vuart_port_driver *drv = to_ps3_vuart_port_driver(_drv);
+ struct ps3_vuart_port_device *dev = to_ps3_vuart_port_device(_dev);
+
+ result = dev->match_id == drv->match_id;
+
+ dev_info(&dev->core, "%s:%d: dev=%u(%s), drv=%u(%s): %s\n", __func__,
+ __LINE__, dev->match_id, dev->core.bus_id, drv->match_id,
+ drv->core.name, (result ? "match" : "miss"));
+
+ return result;
+}
+
+static struct vuart_private vuart_private;
+
+static int ps3_vuart_probe(struct device *_dev)
+{
+ int result;
+ unsigned long tmp;
+ struct ps3_vuart_port_device *dev = to_ps3_vuart_port_device(_dev);
+ struct ps3_vuart_port_driver *drv =
+ to_ps3_vuart_port_driver(_dev->driver);
+
+ dev_dbg(&dev->core, "%s:%d\n", __func__, __LINE__);
+
+ BUG_ON(!drv);
+
+ result = ps3_vuart_match_id_to_port(dev->match_id, &dev->port_number);
+
+ if (result) {
+ dev_dbg(&dev->core, "%s:%d: unknown match_id (%d)\n",
+ __func__, __LINE__, dev->match_id);
+ result = -EINVAL;
+ goto fail_match;
+ }
+
+ if (vuart_private.devices[dev->port_number]) {
+ dev_dbg(&dev->core, "%s:%d: port busy (%d)\n", __func__,
+ __LINE__, dev->port_number);
+ result = -EBUSY;
+ goto fail_match;
+ }
+
+ vuart_private.devices[dev->port_number] = dev;
+
+ INIT_LIST_HEAD(&dev->tx_list.head);
+ spin_lock_init(&dev->tx_list.lock);
+ INIT_LIST_HEAD(&dev->rx_list.head);
+ spin_lock_init(&dev->rx_list.lock);
+
+ vuart_private.in_use++;
+ if (vuart_private.in_use == 1) {
+ result = ps3_alloc_vuart_irq((void*)&vuart_private.bmp.status,
+ &vuart_private.virq);
+
+ if (result) {
+ dev_dbg(&dev->core,
+ "%s:%d: ps3_alloc_vuart_irq failed (%d)\n",
+ __func__, __LINE__, result);
+ result = -EPERM;
+ goto fail_alloc_irq;
+ }
+
+ result = request_irq(vuart_private.virq, ps3_vuart_irq_handler,
+ IRQF_DISABLED, "vuart", &vuart_private);
+
+ if (result) {
+ dev_info(&dev->core, "%s:%d: request_irq failed (%d)\n",
+ __func__, __LINE__, result);
+ goto fail_request_irq;
+ }
+ }
+
+ ps3_vuart_set_interrupt_mask(dev, INTERRUPT_MASK_RX);
+
+ /* clear stale pending interrupts */
+ ps3_vuart_get_interrupt_mask(dev, &tmp);
+
+ ps3_vuart_set_triggers(dev, 1, 1);
+
+ if (drv->probe)
+ result = drv->probe(dev);
+ else {
+ result = 0;
+ dev_info(&dev->core, "%s:%d: no probe method\n", __func__,
+ __LINE__);
+ }
+
+ if (result) {
+ dev_dbg(&dev->core, "%s:%d: drv->probe failed\n",
+ __func__, __LINE__);
+ goto fail_probe;
+ }
+
+ return result;
+
+fail_probe:
+fail_request_irq:
+ vuart_private.in_use--;
+ if (!vuart_private.in_use) {
+ ps3_free_vuart_irq(vuart_private.virq);
+ vuart_private.virq = NO_IRQ;
+ }
+fail_alloc_irq:
+fail_match:
+ dev_dbg(&dev->core, "%s:%d failed\n", __func__, __LINE__);
+ return result;
+}
+
+static int ps3_vuart_remove(struct device *_dev)
+{
+ struct ps3_vuart_port_device *dev = to_ps3_vuart_port_device(_dev);
+ struct ps3_vuart_port_driver *drv =
+ to_ps3_vuart_port_driver(_dev->driver);
+
+ dev_dbg(&dev->core, "%s:%d: %s\n", __func__, __LINE__,
+ dev->core.bus_id);
+
+ BUG_ON(vuart_private.in_use < 1);
+
+ if (drv->remove)
+ drv->remove(dev);
+ else
+ dev_dbg(&dev->core, "%s:%d: %s no remove method\n", __func__,
+ __LINE__, dev->core.bus_id);
+
+ vuart_private.in_use--;
+
+ if (!vuart_private.in_use) {
+ free_irq(vuart_private.virq, &vuart_private);
+ ps3_free_vuart_irq(vuart_private.virq);
+ vuart_private.virq = NO_IRQ;
+ }
+ return 0;
+}
+
+/**
+ * ps3_vuart - The vuart instance.
+ *
+ * The vuart is managed as a bus that port devices connect to.
+ */
+
+struct bus_type ps3_vuart = {
+ .name = "ps3_vuart",
+ .match = ps3_vuart_match,
+ .probe = ps3_vuart_probe,
+ .remove = ps3_vuart_remove,
+};
+
+int __init ps3_vuart_init(void)
+{
+ int result;
+
+ pr_debug("%s:%d:\n", __func__, __LINE__);
+ result = bus_register(&ps3_vuart);
+ BUG_ON(result);
+ return result;
+}
+
+void __exit ps3_vuart_exit(void)
+{
+ pr_debug("%s:%d:\n", __func__, __LINE__);
+ bus_unregister(&ps3_vuart);
+}
+
+core_initcall(ps3_vuart_init);
+module_exit(ps3_vuart_exit);
+
+/**
+ * ps3_vuart_port_release_device - Remove a vuart port device.
+ */
+
+static void ps3_vuart_port_release_device(struct device *_dev)
+{
+ struct ps3_vuart_port_device *dev = to_ps3_vuart_port_device(_dev);
+#if defined(DEBUG)
+ memset(dev, 0xad, sizeof(struct ps3_vuart_port_device));
+#endif
+ kfree(dev);
+}
+
+/**
+ * ps3_vuart_port_device_register - Add a vuart port device.
+ */
+
+int ps3_vuart_port_device_register(struct ps3_vuart_port_device *dev)
+{
+ int result;
+ static unsigned int dev_count = 1;
+
+ dev->core.parent = NULL;
+ dev->core.bus = &ps3_vuart;
+ dev->core.release = ps3_vuart_port_release_device;
+
+ snprintf(dev->core.bus_id, sizeof(dev->core.bus_id), "vuart_%02x",
+ dev_count++);
+
+ dev_dbg(&dev->core, "%s:%d register\n", __func__, __LINE__);
+
+ result = device_register(&dev->core);
+
+ return result;
+}
+
+EXPORT_SYMBOL_GPL(ps3_vuart_port_device_register);
+
+/**
+ * ps3_vuart_port_driver_register - Add a vuart port device driver.
+ */
+
+int ps3_vuart_port_driver_register(struct ps3_vuart_port_driver *drv)
+{
+ int result;
+
+ pr_debug("%s:%d: (%s)\n", __func__, __LINE__, drv->core.name);
+ drv->core.bus = &ps3_vuart;
+ result = driver_register(&drv->core);
+ return result;
+}
+
+EXPORT_SYMBOL_GPL(ps3_vuart_port_driver_register);
+
+/**
+ * ps3_vuart_port_driver_unregister - Remove a vuart port device driver.
+ */
+
+void ps3_vuart_port_driver_unregister(struct ps3_vuart_port_driver *drv)
+{
+ driver_unregister(&drv->core);
+}
+
+EXPORT_SYMBOL_GPL(ps3_vuart_port_driver_unregister);
diff --git a/drivers/ps3/vuart.h b/drivers/ps3/vuart.h
new file mode 100644
index 0000000..28fd89f
--- /dev/null
+++ b/drivers/ps3/vuart.h
@@ -0,0 +1,94 @@
+/*
+ * PS3 virtual uart
+ *
+ * Copyright (C) 2006 Sony Computer Entertainment Inc.
+ * Copyright 2006 Sony Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#if !defined(_PS3_VUART_H)
+#define _PS3_VUART_H
+
+struct ps3_vuart_stats {
+ unsigned long bytes_written;
+ unsigned long bytes_read;
+ unsigned long tx_interrupts;
+ unsigned long rx_interrupts;
+ unsigned long disconnect_interrupts;
+};
+
+/**
+ * struct ps3_vuart_port_device - a device on a vuart port
+ */
+
+struct ps3_vuart_port_device {
+ enum ps3_match_id match_id;
+ struct device core;
+
+ /* private driver variables */
+ unsigned int port_number;
+ unsigned long interrupt_mask;
+ struct {
+ spinlock_t lock;
+ struct list_head head;
+ } tx_list;
+ struct {
+ unsigned long bytes_held;
+ spinlock_t lock;
+ struct list_head head;
+ } rx_list;
+ struct ps3_vuart_stats stats;
+};
+
+/**
+ * struct ps3_vuart_port_driver - a driver for a device on a vuart port
+ */
+
+struct ps3_vuart_port_driver {
+ enum ps3_match_id match_id;
+ struct device_driver core;
+ int (*probe)(struct ps3_vuart_port_device *);
+ int (*remove)(struct ps3_vuart_port_device *);
+ int (*tx_event)(struct ps3_vuart_port_device *dev);
+ int (*rx_event)(struct ps3_vuart_port_device *dev);
+ int (*disconnect_event)(struct ps3_vuart_port_device *dev);
+ /* int (*suspend)(struct ps3_vuart_port_device *, pm_message_t); */
+ /* int (*resume)(struct ps3_vuart_port_device *); */
+};
+
+int ps3_vuart_port_device_register(struct ps3_vuart_port_device *dev);
+int ps3_vuart_port_driver_register(struct ps3_vuart_port_driver *drv);
+void ps3_vuart_port_driver_unregister(struct ps3_vuart_port_driver *drv);
+int ps3_vuart_write(struct ps3_vuart_port_device *dev,
+ const void* buf, unsigned int bytes);
+int ps3_vuart_read(struct ps3_vuart_port_device *dev, void* buf,
+ unsigned int bytes);
+static inline struct ps3_vuart_port_driver *to_ps3_vuart_port_driver(
+ struct device_driver *_drv)
+{
+ return container_of(_drv, struct ps3_vuart_port_driver, core);
+}
+static inline struct ps3_vuart_port_device *to_ps3_vuart_port_device(
+ struct device *_dev)
+{
+ return container_of(_dev, struct ps3_vuart_port_device, core);
+}
+
+int ps3_vuart_write(struct ps3_vuart_port_device *dev, const void* buf,
+ unsigned int bytes);
+int ps3_vuart_read(struct ps3_vuart_port_device *dev, void* buf,
+ unsigned int bytes);
+
+#endif
diff --git a/include/asm-avr32/arch-at32ap/at32ap7000.h b/include/asm-avr32/arch-at32ap/at32ap7000.h
new file mode 100644
index 0000000..ba85e04
--- /dev/null
+++ b/include/asm-avr32/arch-at32ap/at32ap7000.h
@@ -0,0 +1,33 @@
+/*
+ * Pin definitions for AT32AP7000.
+ *
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_AT32AP7000_H__
+#define __ASM_ARCH_AT32AP7000_H__
+
+#define GPIO_PERIPH_A 0
+#define GPIO_PERIPH_B 1
+
+#define NR_GPIO_CONTROLLERS 4
+
+/*
+ * Pin numbers identifying specific GPIO pins on the chip. They can
+ * also be converted to IRQ numbers by passing them through
+ * gpio_to_irq().
+ */
+#define GPIO_PIOA_BASE (0)
+#define GPIO_PIOB_BASE (GPIO_PIOA_BASE + 32)
+#define GPIO_PIOC_BASE (GPIO_PIOB_BASE + 32)
+#define GPIO_PIOD_BASE (GPIO_PIOC_BASE + 32)
+
+#define GPIO_PIN_PA(N) (GPIO_PIOA_BASE + (N))
+#define GPIO_PIN_PB(N) (GPIO_PIOB_BASE + (N))
+#define GPIO_PIN_PC(N) (GPIO_PIOC_BASE + (N))
+#define GPIO_PIN_PD(N) (GPIO_PIOD_BASE + (N))
+
+#endif /* __ASM_ARCH_AT32AP7000_H__ */
diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h
index a39b3e9..b120ee0 100644
--- a/include/asm-avr32/arch-at32ap/board.h
+++ b/include/asm-avr32/arch-at32ap/board.h
@@ -21,10 +21,7 @@
struct platform_device *at32_add_device_usart(unsigned int id);
struct eth_platform_data {
- u8 valid;
- u8 mii_phy_addr;
u8 is_rmii;
- u8 hw_addr[6];
};
struct platform_device *
at32_add_device_eth(unsigned int id, struct eth_platform_data *data);
diff --git a/include/asm-avr32/arch-at32ap/portmux.h b/include/asm-avr32/arch-at32ap/portmux.h
index 4d50421..83c6905 100644
--- a/include/asm-avr32/arch-at32ap/portmux.h
+++ b/include/asm-avr32/arch-at32ap/portmux.h
@@ -7,10 +7,20 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#ifndef __ASM_AVR32_AT32_PORTMUX_H__
-#define __ASM_AVR32_AT32_PORTMUX_H__
+#ifndef __ASM_ARCH_PORTMUX_H__
+#define __ASM_ARCH_PORTMUX_H__
-void portmux_set_func(unsigned int portmux_id, unsigned int pin_id,
- unsigned int function_id);
+/*
+ * Set up pin multiplexing, called from board init only.
+ *
+ * The following flags determine the initial state of the pin.
+ */
+#define AT32_GPIOF_PULLUP 0x00000001 /* Enable pull-up */
+#define AT32_GPIOF_OUTPUT 0x00000002 /* Enable output driver */
+#define AT32_GPIOF_HIGH 0x00000004 /* Set output high */
-#endif /* __ASM_AVR32_AT32_PORTMUX_H__ */
+void at32_select_periph(unsigned int pin, unsigned int periph,
+ unsigned long flags);
+void at32_select_gpio(unsigned int pin, unsigned long flags);
+
+#endif /* __ASM_ARCH_PORTMUX_H__ */
diff --git a/include/asm-avr32/dma-mapping.h b/include/asm-avr32/dma-mapping.h
index 0580b5d..5c01e27 100644
--- a/include/asm-avr32/dma-mapping.h
+++ b/include/asm-avr32/dma-mapping.h
@@ -109,7 +109,7 @@
dma_map_single(struct device *dev, void *cpu_addr, size_t size,
enum dma_data_direction direction)
{
- dma_cache_sync(cpu_addr, size, direction);
+ dma_cache_sync(dev, cpu_addr, size, direction);
return virt_to_bus(cpu_addr);
}
@@ -211,7 +211,7 @@
sg[i].dma_address = page_to_bus(sg[i].page) + sg[i].offset;
virt = page_address(sg[i].page) + sg[i].offset;
- dma_cache_sync(virt, sg[i].length, direction);
+ dma_cache_sync(dev, virt, sg[i].length, direction);
}
return nents;
@@ -256,14 +256,14 @@
dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
size_t size, enum dma_data_direction direction)
{
- dma_cache_sync(bus_to_virt(dma_handle), size, direction);
+ dma_cache_sync(dev, bus_to_virt(dma_handle), size, direction);
}
static inline void
dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
size_t size, enum dma_data_direction direction)
{
- dma_cache_sync(bus_to_virt(dma_handle), size, direction);
+ dma_cache_sync(dev, bus_to_virt(dma_handle), size, direction);
}
/**
@@ -286,7 +286,7 @@
int i;
for (i = 0; i < nents; i++) {
- dma_cache_sync(page_address(sg[i].page) + sg[i].offset,
+ dma_cache_sync(dev, page_address(sg[i].page) + sg[i].offset,
sg[i].length, direction);
}
}
@@ -298,7 +298,7 @@
int i;
for (i = 0; i < nents; i++) {
- dma_cache_sync(page_address(sg[i].page) + sg[i].offset,
+ dma_cache_sync(dev, page_address(sg[i].page) + sg[i].offset,
sg[i].length, direction);
}
}
diff --git a/include/asm-mips/compat.h b/include/asm-mips/compat.h
index 55a0152..432653d 100644
--- a/include/asm-mips/compat.h
+++ b/include/asm-mips/compat.h
@@ -5,6 +5,7 @@
*/
#include <linux/types.h>
#include <asm/page.h>
+#include <asm/ptrace.h>
#define COMPAT_USER_HZ 100
diff --git a/include/asm-mips/mach-ip27/irq.h b/include/asm-mips/mach-ip27/irq.h
index 806213c..25f0c3f 100644
--- a/include/asm-mips/mach-ip27/irq.h
+++ b/include/asm-mips/mach-ip27/irq.h
@@ -10,8 +10,6 @@
#ifndef __ASM_MACH_IP27_IRQ_H
#define __ASM_MACH_IP27_IRQ_H
-#include <asm/sn/arch.h>
-
/*
* A hardwired interrupt number is completly stupid for this system - a
* large configuration might have thousands if not tenthousands of
diff --git a/include/asm-mips/mach-ip27/topology.h b/include/asm-mips/mach-ip27/topology.h
index a13b715..44790fd 100644
--- a/include/asm-mips/mach-ip27/topology.h
+++ b/include/asm-mips/mach-ip27/topology.h
@@ -1,7 +1,6 @@
#ifndef _ASM_MACH_TOPOLOGY_H
#define _ASM_MACH_TOPOLOGY_H 1
-#include <asm/sn/arch.h>
#include <asm/sn/hub.h>
#include <asm/mmzone.h>
diff --git a/include/asm-mips/sn/arch.h b/include/asm-mips/sn/arch.h
index 51174af..da523de 100644
--- a/include/asm-mips/sn/arch.h
+++ b/include/asm-mips/sn/arch.h
@@ -18,7 +18,6 @@
#endif
typedef u64 hubreg_t;
-typedef u64 nic_t;
#define cputonasid(cpu) (cpu_data[(cpu)].p_nasid)
#define cputoslice(cpu) (cpu_data[(cpu)].p_slice)
diff --git a/include/asm-mips/sn/klconfig.h b/include/asm-mips/sn/klconfig.h
index 15d70ca..82aeb9e 100644
--- a/include/asm-mips/sn/klconfig.h
+++ b/include/asm-mips/sn/klconfig.h
@@ -61,6 +61,8 @@
#endif /* CONFIG_SGI_IP35 */
#endif /* CONFIG_SGI_IP27 || CONFIG_SGI_IP35 */
+typedef u64 nic_t;
+
#define KLCFGINFO_MAGIC 0xbeedbabe
typedef s32 klconf_off_t;
diff --git a/include/asm-powerpc/Kbuild b/include/asm-powerpc/Kbuild
index 1e63738..703970f 100644
--- a/include/asm-powerpc/Kbuild
+++ b/include/asm-powerpc/Kbuild
@@ -17,7 +17,6 @@
header-y += poll.h
header-y += shmparam.h
header-y += sockios.h
-header-y += spu_info.h
header-y += ucontext.h
header-y += ioctl.h
header-y += linkage.h
@@ -37,6 +36,7 @@
unifdef-y += ptrace.h
unifdef-y += seccomp.h
unifdef-y += signal.h
+unifdef-y += spu_info.h
unifdef-y += termios.h
unifdef-y += types.h
unifdef-y += unistd.h
diff --git a/include/asm-powerpc/bug.h b/include/asm-powerpc/bug.h
index 978b2c7..7095688 100644
--- a/include/asm-powerpc/bug.h
+++ b/include/asm-powerpc/bug.h
@@ -13,36 +13,39 @@
#ifndef __ASSEMBLY__
-struct bug_entry {
- unsigned long bug_addr;
- long line;
- const char *file;
- const char *function;
-};
-
-struct bug_entry *find_bug(unsigned long bugaddr);
-
-/*
- * If this bit is set in the line number it means that the trap
- * is for WARN_ON rather than BUG or BUG_ON.
- */
-#define BUG_WARNING_TRAP 0x1000000
-
#ifdef CONFIG_BUG
+/* _EMIT_BUG_ENTRY expects args %0,%1,%2,%3 to be FILE, LINE, flags and
+ sizeof(struct bug_entry), respectively */
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+#define _EMIT_BUG_ENTRY \
+ ".section __bug_table,\"a\"\n" \
+ "2:\t" PPC_LONG "1b, %0\n" \
+ "\t.short %1, %2\n" \
+ ".org 2b+%3\n" \
+ ".previous\n"
+#else
+#define _EMIT_BUG_ENTRY \
+ ".section __bug_table,\"a\"\n" \
+ "2:\t" PPC_LONG "1b\n" \
+ "\t.short %2\n" \
+ ".org 2b+%3\n" \
+ ".previous\n"
+#endif
+
/*
* BUG_ON() and WARN_ON() do their best to cooperate with compile-time
* optimisations. However depending on the complexity of the condition
* some compiler versions may not produce optimal results.
*/
-#define BUG() do { \
- __asm__ __volatile__( \
- "1: twi 31,0,0\n" \
- ".section __bug_table,\"a\"\n" \
- "\t"PPC_LONG" 1b,%0,%1,%2\n" \
- ".previous" \
- : : "i" (__LINE__), "i" (__FILE__), "i" (__FUNCTION__)); \
+#define BUG() do { \
+ __asm__ __volatile__( \
+ "1: twi 31,0,0\n" \
+ _EMIT_BUG_ENTRY \
+ : : "i" (__FILE__), "i" (__LINE__), \
+ "i" (0), "i" (sizeof(struct bug_entry))); \
+ for(;;) ; \
} while (0)
#define BUG_ON(x) do { \
@@ -51,23 +54,21 @@
BUG(); \
} else { \
__asm__ __volatile__( \
- "1: "PPC_TLNEI" %0,0\n" \
- ".section __bug_table,\"a\"\n" \
- "\t"PPC_LONG" 1b,%1,%2,%3\n" \
- ".previous" \
- : : "r" ((long)(x)), "i" (__LINE__), \
- "i" (__FILE__), "i" (__FUNCTION__)); \
+ "1: "PPC_TLNEI" %4,0\n" \
+ _EMIT_BUG_ENTRY \
+ : : "i" (__FILE__), "i" (__LINE__), "i" (0), \
+ "i" (sizeof(struct bug_entry)), \
+ "r" ((long)(x))); \
} \
} while (0)
#define __WARN() do { \
__asm__ __volatile__( \
"1: twi 31,0,0\n" \
- ".section __bug_table,\"a\"\n" \
- "\t"PPC_LONG" 1b,%0,%1,%2\n" \
- ".previous" \
- : : "i" (__LINE__ + BUG_WARNING_TRAP), \
- "i" (__FILE__), "i" (__FUNCTION__)); \
+ _EMIT_BUG_ENTRY \
+ : : "i" (__FILE__), "i" (__LINE__), \
+ "i" (BUGFLAG_WARNING), \
+ "i" (sizeof(struct bug_entry))); \
} while (0)
#define WARN_ON(x) ({ \
@@ -77,13 +78,12 @@
__WARN(); \
} else { \
__asm__ __volatile__( \
- "1: "PPC_TLNEI" %0,0\n" \
- ".section __bug_table,\"a\"\n" \
- "\t"PPC_LONG" 1b,%1,%2,%3\n" \
- ".previous" \
- : : "r" (__ret_warn_on), \
- "i" (__LINE__ + BUG_WARNING_TRAP), \
- "i" (__FILE__), "i" (__FUNCTION__)); \
+ "1: "PPC_TLNEI" %4,0\n" \
+ _EMIT_BUG_ENTRY \
+ : : "i" (__FILE__), "i" (__LINE__), \
+ "i" (BUGFLAG_WARNING), \
+ "i" (sizeof(struct bug_entry)), \
+ "r" (__ret_warn_on)); \
} \
unlikely(__ret_warn_on); \
})
diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h
index 6fe5c9d..7384b80 100644
--- a/include/asm-powerpc/cputable.h
+++ b/include/asm-powerpc/cputable.h
@@ -126,6 +126,7 @@
#define CPU_FTR_NODSISRALIGN ASM_CONST(0x0000000000100000)
#define CPU_FTR_PPC_LE ASM_CONST(0x0000000000200000)
#define CPU_FTR_REAL_LE ASM_CONST(0x0000000000400000)
+#define CPU_FTR_FPU_UNAVAILABLE ASM_CONST(0x0000000000800000)
/*
* Add the 64-bit processor unique features in the top half of the word;
@@ -152,6 +153,7 @@
#define CPU_FTR_PURR LONG_ASM_CONST(0x0000400000000000)
#define CPU_FTR_CELL_TB_BUG LONG_ASM_CONST(0x0000800000000000)
#define CPU_FTR_SPURR LONG_ASM_CONST(0x0001000000000000)
+#define CPU_FTR_DSCR LONG_ASM_CONST(0x0002000000000000)
#ifndef __ASSEMBLY__
@@ -295,6 +297,9 @@
#define CPU_FTRS_E300 (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE | \
CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS | \
CPU_FTR_COMMON)
+#define CPU_FTRS_E300C2 (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE | \
+ CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS | \
+ CPU_FTR_COMMON | CPU_FTR_FPU_UNAVAILABLE)
#define CPU_FTRS_CLASSIC32 (CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | \
CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE)
#define CPU_FTRS_8XX (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB)
@@ -330,13 +335,14 @@
CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
CPU_FTR_MMCRA | CPU_FTR_SMT | \
CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
- CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE)
+ CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \
+ CPU_FTR_DSCR)
#define CPU_FTRS_POWER6X (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | \
CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
CPU_FTR_MMCRA | CPU_FTR_SMT | \
CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
CPU_FTR_PURR | CPU_FTR_CI_LARGE_PAGE | \
- CPU_FTR_SPURR | CPU_FTR_REAL_LE)
+ CPU_FTR_SPURR | CPU_FTR_REAL_LE | CPU_FTR_DSCR)
#define CPU_FTRS_CELL (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | \
CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \
@@ -364,7 +370,8 @@
CPU_FTRS_7450_21 | CPU_FTRS_7450_23 | CPU_FTRS_7455_1 |
CPU_FTRS_7455_20 | CPU_FTRS_7455 | CPU_FTRS_7447_10 |
CPU_FTRS_7447 | CPU_FTRS_7447A | CPU_FTRS_82XX |
- CPU_FTRS_G2_LE | CPU_FTRS_E300 | CPU_FTRS_CLASSIC32 |
+ CPU_FTRS_G2_LE | CPU_FTRS_E300 | CPU_FTRS_E300C2 |
+ CPU_FTRS_CLASSIC32 |
#else
CPU_FTRS_GENERIC_32 |
#endif
@@ -403,7 +410,8 @@
CPU_FTRS_7450_21 & CPU_FTRS_7450_23 & CPU_FTRS_7455_1 &
CPU_FTRS_7455_20 & CPU_FTRS_7455 & CPU_FTRS_7447_10 &
CPU_FTRS_7447 & CPU_FTRS_7447A & CPU_FTRS_82XX &
- CPU_FTRS_G2_LE & CPU_FTRS_E300 & CPU_FTRS_CLASSIC32 &
+ CPU_FTRS_G2_LE & CPU_FTRS_E300 & CPU_FTRS_E300C2 &
+ CPU_FTRS_CLASSIC32 &
#else
CPU_FTRS_GENERIC_32 &
#endif
diff --git a/include/asm-powerpc/dcr-native.h b/include/asm-powerpc/dcr-native.h
index fd4a5f5..d7a1bc1 100644
--- a/include/asm-powerpc/dcr-native.h
+++ b/include/asm-powerpc/dcr-native.h
@@ -20,8 +20,7 @@
#ifndef _ASM_POWERPC_DCR_NATIVE_H
#define _ASM_POWERPC_DCR_NATIVE_H
#ifdef __KERNEL__
-
-#include <asm/reg.h>
+#ifndef __ASSEMBLY__
typedef struct {} dcr_host_t;
@@ -32,7 +31,41 @@
#define dcr_read(host, dcr_n) mfdcr(dcr_n)
#define dcr_write(host, dcr_n, value) mtdcr(dcr_n, value)
+/* Device Control Registers */
+void __mtdcr(int reg, unsigned int val);
+unsigned int __mfdcr(int reg);
+#define mfdcr(rn) \
+ ({unsigned int rval; \
+ if (__builtin_constant_p(rn)) \
+ asm volatile("mfdcr %0," __stringify(rn) \
+ : "=r" (rval)); \
+ else \
+ rval = __mfdcr(rn); \
+ rval;})
+#define mtdcr(rn, v) \
+do { \
+ if (__builtin_constant_p(rn)) \
+ asm volatile("mtdcr " __stringify(rn) ",%0" \
+ : : "r" (v)); \
+ else \
+ __mtdcr(rn, v); \
+} while (0)
+
+/* R/W of indirect DCRs make use of standard naming conventions for DCRs */
+#define mfdcri(base, reg) \
+({ \
+ mtdcr(base ## _CFGADDR, base ## _ ## reg); \
+ mfdcr(base ## _CFGDATA); \
+})
+
+#define mtdcri(base, reg, data) \
+do { \
+ mtdcr(base ## _CFGADDR, base ## _ ## reg); \
+ mtdcr(base ## _CFGDATA, data); \
+} while (0)
+
+#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_DCR_NATIVE_H */
diff --git a/include/asm-powerpc/dcr.h b/include/asm-powerpc/dcr.h
index 473f2c7..b66c5e6 100644
--- a/include/asm-powerpc/dcr.h
+++ b/include/asm-powerpc/dcr.h
@@ -20,6 +20,7 @@
#ifndef _ASM_POWERPC_DCR_H
#define _ASM_POWERPC_DCR_H
#ifdef __KERNEL__
+#ifdef CONFIG_PPC_DCR
#ifdef CONFIG_PPC_DCR_NATIVE
#include <asm/dcr-native.h>
@@ -38,5 +39,6 @@
unsigned int index);
#endif /* CONFIG_PPC_MERGE */
+#endif /* CONFIG_PPC_DCR */
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_DCR_H */
diff --git a/include/asm-powerpc/hw_irq.h b/include/asm-powerpc/hw_irq.h
index d604863..9e4dd98 100644
--- a/include/asm-powerpc/hw_irq.h
+++ b/include/asm-powerpc/hw_irq.h
@@ -107,25 +107,6 @@
#endif /* CONFIG_PPC64 */
-#define mask_irq(irq) \
- ({ \
- irq_desc_t *desc = get_irq_desc(irq); \
- if (desc->chip && desc->chip->disable) \
- desc->chip->disable(irq); \
- })
-#define unmask_irq(irq) \
- ({ \
- irq_desc_t *desc = get_irq_desc(irq); \
- if (desc->chip && desc->chip->enable) \
- desc->chip->enable(irq); \
- })
-#define ack_irq(irq) \
- ({ \
- irq_desc_t *desc = get_irq_desc(irq); \
- if (desc->chip && desc->chip->ack) \
- desc->chip->ack(irq); \
- })
-
/*
* interrupt-retrigger: should we handle this via lost interrupts and IPIs
* or should we not care like we do now ? --BenH.
diff --git a/include/asm-powerpc/module.h b/include/asm-powerpc/module.h
index 584fabf..e5f14b1 100644
--- a/include/asm-powerpc/module.h
+++ b/include/asm-powerpc/module.h
@@ -46,8 +46,6 @@
unsigned int num_bugs;
};
-extern struct bug_entry *module_find_bug(unsigned long bugaddr);
-
/*
* Select ELF headers.
* Make empty section for module_frob_arch_sections to expand.
diff --git a/include/asm-powerpc/pci-bridge.h b/include/asm-powerpc/pci-bridge.h
index 7bb7f90..cb02c9d 100644
--- a/include/asm-powerpc/pci-bridge.h
+++ b/include/asm-powerpc/pci-bridge.h
@@ -31,12 +31,12 @@
int last_busno;
void __iomem *io_base_virt;
- unsigned long io_base_phys;
+ resource_size_t io_base_phys;
/* Some machines have a non 1:1 mapping of
* the PCI memory space in the CPU bus space
*/
- unsigned long pci_mem_offset;
+ resource_size_t pci_mem_offset;
unsigned long pci_io_size;
struct pci_ops *ops;
diff --git a/include/asm-powerpc/pci.h b/include/asm-powerpc/pci.h
index 16f1331..ac656ee 100644
--- a/include/asm-powerpc/pci.h
+++ b/include/asm-powerpc/pci.h
@@ -143,8 +143,13 @@
/* Tell drivers/pci/proc.c that we have pci_mmap_page_range() */
#define HAVE_PCI_MMAP 1
-#ifdef CONFIG_PPC64
-/* pci_unmap_{single,page} is not a nop, thus... */
+#if defined(CONFIG_PPC64) || defined(CONFIG_NOT_COHERENT_CACHE)
+/*
+ * For 64-bit kernels, pci_unmap_{single,page} is not a nop.
+ * For 32-bit non-coherent kernels, pci_dma_sync_single_for_cpu() and
+ * so on are not nops.
+ * and thus...
+ */
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \
dma_addr_t ADDR_NAME;
#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \
@@ -158,6 +163,20 @@
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \
(((PTR)->LEN_NAME) = (VAL))
+#else /* 32-bit && coherent */
+
+/* pci_unmap_{page,single} is a nop so... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
+#define pci_unmap_addr(PTR, ADDR_NAME) (0)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0)
+#define pci_unmap_len(PTR, LEN_NAME) (0)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
+
+#endif /* CONFIG_PPC64 || CONFIG_NOT_COHERENT_CACHE */
+
+#ifdef CONFIG_PPC64
+
/* The PCI address space does not equal the physical memory address
* space (we have an IOMMU). The IDE and SCSI device layers use
* this boolean for bounce buffer decisions.
@@ -172,16 +191,8 @@
*/
#define PCI_DMA_BUS_IS_PHYS (1)
-/* pci_unmap_{page,single} is a nop so... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME) (0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0)
-#define pci_unmap_len(PTR, LEN_NAME) (0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
-
#endif /* CONFIG_PPC64 */
-
+
extern void pcibios_resource_to_bus(struct pci_dev *dev,
struct pci_bus_region *region,
struct resource *res);
diff --git a/include/asm-powerpc/reg.h b/include/asm-powerpc/reg.h
index 6faae7b..a3631b1 100644
--- a/include/asm-powerpc/reg.h
+++ b/include/asm-powerpc/reg.h
@@ -143,6 +143,7 @@
/* Special Purpose Registers (SPRNs)*/
#define SPRN_CTR 0x009 /* Count Register */
+#define SPRN_DSCR 0x11
#define SPRN_CTRLF 0x088
#define SPRN_CTRLT 0x098
#define CTRL_CT 0xc0000000 /* current thread */
@@ -163,6 +164,7 @@
#define SPRN_TBRU 0x10D /* Time Base Read Upper Register (user, R/O) */
#define SPRN_TBWL 0x11C /* Time Base Lower Register (super, R/W) */
#define SPRN_TBWU 0x11D /* Time Base Upper Register (super, R/W) */
+#define SPRN_SPURR 0x134 /* Scaled PURR */
#define SPRN_HIOR 0x137 /* 970 Hypervisor interrupt offset */
#define SPRN_DBAT0L 0x219 /* Data BAT 0 Lower Register */
#define SPRN_DBAT0U 0x218 /* Data BAT 0 Upper Register */
diff --git a/include/asm-powerpc/rtas.h b/include/asm-powerpc/rtas.h
index 5a0c136..8eaa7b2 100644
--- a/include/asm-powerpc/rtas.h
+++ b/include/asm-powerpc/rtas.h
@@ -159,6 +159,7 @@
extern void enter_rtas(unsigned long);
extern int rtas_token(const char *service);
+extern int rtas_service_present(const char *service);
extern int rtas_call(int token, int, int, int *, ...);
extern void rtas_restart(char *cmd);
extern void rtas_power_off(void);
@@ -221,8 +222,6 @@
extern spinlock_t rtas_data_buf_lock;
extern char rtas_data_buf[RTAS_DATA_BUF_SIZE];
-extern void rtas_stop_self(void);
-
/* RMO buffer reserved for user-space RTAS use */
extern unsigned long rtas_rmo_buf;
diff --git a/include/asm-ppc/pci-bridge.h b/include/asm-ppc/pci-bridge.h
index 6c955d0..4d35b84 100644
--- a/include/asm-ppc/pci-bridge.h
+++ b/include/asm-ppc/pci-bridge.h
@@ -20,8 +20,8 @@
extern struct pci_controller* pcibios_alloc_controller(void);
/* Helper function for setting up resources */
-extern void pci_init_resource(struct resource *res, unsigned long start,
- unsigned long end, int flags, char *name);
+extern void pci_init_resource(struct resource *res, resource_size_t start,
+ resource_size_t end, int flags, char *name);
/* Get the PCI host controller for a bus */
extern struct pci_controller* pci_bus_to_hose(int bus);
@@ -50,12 +50,12 @@
int bus_offset;
void __iomem *io_base_virt;
- unsigned long io_base_phys;
+ resource_size_t io_base_phys;
/* Some machines (PReP) have a non 1:1 mapping of
* the PCI memory space in the CPU bus space
*/
- unsigned long pci_mem_offset;
+ resource_size_t pci_mem_offset;
struct pci_ops *ops;
volatile unsigned int __iomem *cfg_addr;
diff --git a/include/asm-ppc/pci.h b/include/asm-ppc/pci.h
index 11ffaaa..9d16202 100644
--- a/include/asm-ppc/pci.h
+++ b/include/asm-ppc/pci.h
@@ -61,6 +61,27 @@
*/
#define PCI_DMA_BUS_IS_PHYS (1)
+#ifdef CONFIG_NOT_COHERENT_CACHE
+/*
+ * pci_unmap_{page,single} are NOPs but pci_dma_sync_single_for_cpu()
+ * and so on are not, so...
+ */
+
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \
+ dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \
+ __u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME) \
+ ((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \
+ (((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME) \
+ ((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \
+ (((PTR)->LEN_NAME) = (VAL))
+
+#else /* coherent */
+
/* pci_unmap_{page,single} is a nop so... */
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
@@ -69,6 +90,8 @@
#define pci_unmap_len(PTR, LEN_NAME) (0)
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
+#endif /* CONFIG_NOT_COHERENT_CACHE */
+
#ifdef CONFIG_PCI
static inline void pci_dma_burst_advice(struct pci_dev *pdev,
enum pci_dma_burst_strategy *strat,
diff --git a/include/asm-ppc/reg_booke.h b/include/asm-ppc/reg_booke.h
index 602fbad..a263fc1e 100644
--- a/include/asm-ppc/reg_booke.h
+++ b/include/asm-ppc/reg_booke.h
@@ -9,41 +9,9 @@
#ifndef __ASM_PPC_REG_BOOKE_H__
#define __ASM_PPC_REG_BOOKE_H__
+#include <asm/dcr.h>
+
#ifndef __ASSEMBLY__
-/* Device Control Registers */
-void __mtdcr(int reg, unsigned int val);
-unsigned int __mfdcr(int reg);
-#define mfdcr(rn) \
- ({unsigned int rval; \
- if (__builtin_constant_p(rn)) \
- asm volatile("mfdcr %0," __stringify(rn) \
- : "=r" (rval)); \
- else \
- rval = __mfdcr(rn); \
- rval;})
-
-#define mtdcr(rn, v) \
-do { \
- if (__builtin_constant_p(rn)) \
- asm volatile("mtdcr " __stringify(rn) ",%0" \
- : : "r" (v)); \
- else \
- __mtdcr(rn, v); \
-} while (0)
-
-/* R/W of indirect DCRs make use of standard naming conventions for DCRs */
-#define mfdcri(base, reg) \
-({ \
- mtdcr(base ## _CFGADDR, base ## _ ## reg); \
- mfdcr(base ## _CFGDATA); \
-})
-
-#define mtdcri(base, reg, data) \
-do { \
- mtdcr(base ## _CFGADDR, base ## _ ## reg); \
- mtdcr(base ## _CFGDATA, data); \
-} while (0)
-
/* Performance Monitor Registers */
#define mfpmr(rn) ({unsigned int rval; \
asm volatile("mfpmr %0," __stringify(rn) \
diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
index 3da29e2..abb64c4 100644
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -19,6 +19,7 @@
#define _FSL_DEVICE_H_
#include <linux/types.h>
+#include <linux/phy.h>
/*
* Some conventions on how we handle peripherals on Freescale chips