ACPICA: Source restructuring: split large files into 8 new files.
Created logical splits for eight new files. Improves modularity
and configurability.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
diff --git a/drivers/acpi/acpica/nsprepkg.c b/drivers/acpi/acpica/nsprepkg.c
new file mode 100644
index 0000000..c27be70
--- /dev/null
+++ b/drivers/acpi/acpica/nsprepkg.c
@@ -0,0 +1,621 @@
+/******************************************************************************
+ *
+ * Module Name: nsprepkg - Validation of package objects for predefined names
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2012, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acnamesp.h"
+#include "acpredef.h"
+
+#define _COMPONENT ACPI_NAMESPACE
+ACPI_MODULE_NAME("nsprepkg")
+
+/* Local prototypes */
+static acpi_status
+acpi_ns_check_package_list(struct acpi_predefined_data *data,
+ const union acpi_predefined_info *package,
+ union acpi_operand_object **elements, u32 count);
+
+static acpi_status
+acpi_ns_check_package_elements(struct acpi_predefined_data *data,
+ union acpi_operand_object **elements,
+ u8 type1,
+ u32 count1,
+ u8 type2, u32 count2, u32 start_index);
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ns_check_package
+ *
+ * PARAMETERS: data - Pointer to validation data structure
+ * return_object_ptr - Pointer to the object returned from the
+ * evaluation of a method or object
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Check a returned package object for the correct count and
+ * correct type of all sub-objects.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ns_check_package(struct acpi_predefined_data *data,
+ union acpi_operand_object **return_object_ptr)
+{
+ union acpi_operand_object *return_object = *return_object_ptr;
+ const union acpi_predefined_info *package;
+ union acpi_operand_object **elements;
+ acpi_status status = AE_OK;
+ u32 expected_count;
+ u32 count;
+ u32 i;
+
+ ACPI_FUNCTION_NAME(ns_check_package);
+
+ /* The package info for this name is in the next table entry */
+
+ package = data->predefined + 1;
+
+ ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
+ "%s Validating return Package of Type %X, Count %X\n",
+ data->pathname, package->ret_info.type,
+ return_object->package.count));
+
+ /*
+ * For variable-length Packages, we can safely remove all embedded
+ * and trailing NULL package elements
+ */
+ acpi_ns_remove_null_elements(data, package->ret_info.type,
+ return_object);
+
+ /* Extract package count and elements array */
+
+ elements = return_object->package.elements;
+ count = return_object->package.count;
+
+ /* The package must have at least one element, else invalid */
+
+ if (!count) {
+ ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
+ "Return Package has no elements (empty)"));
+
+ return (AE_AML_OPERAND_VALUE);
+ }
+
+ /*
+ * Decode the type of the expected package contents
+ *
+ * PTYPE1 packages contain no subpackages
+ * PTYPE2 packages contain sub-packages
+ */
+ switch (package->ret_info.type) {
+ case ACPI_PTYPE1_FIXED:
+
+ /*
+ * The package count is fixed and there are no sub-packages
+ *
+ * If package is too small, exit.
+ * If package is larger than expected, issue warning but continue
+ */
+ expected_count =
+ package->ret_info.count1 + package->ret_info.count2;
+ if (count < expected_count) {
+ goto package_too_small;
+ } else if (count > expected_count) {
+ ACPI_DEBUG_PRINT((ACPI_DB_REPAIR,
+ "%s: Return Package is larger than needed - "
+ "found %u, expected %u\n",
+ data->pathname, count,
+ expected_count));
+ }
+
+ /* Validate all elements of the returned package */
+
+ status = acpi_ns_check_package_elements(data, elements,
+ package->ret_info.
+ object_type1,
+ package->ret_info.
+ count1,
+ package->ret_info.
+ object_type2,
+ package->ret_info.
+ count2, 0);
+ break;
+
+ case ACPI_PTYPE1_VAR:
+
+ /*
+ * The package count is variable, there are no sub-packages, and all
+ * elements must be of the same type
+ */
+ for (i = 0; i < count; i++) {
+ status = acpi_ns_check_object_type(data, elements,
+ package->ret_info.
+ object_type1, i);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+ elements++;
+ }
+ break;
+
+ case ACPI_PTYPE1_OPTION:
+
+ /*
+ * The package count is variable, there are no sub-packages. There are
+ * a fixed number of required elements, and a variable number of
+ * optional elements.
+ *
+ * Check if package is at least as large as the minimum required
+ */
+ expected_count = package->ret_info3.count;
+ if (count < expected_count) {
+ goto package_too_small;
+ }
+
+ /* Variable number of sub-objects */
+
+ for (i = 0; i < count; i++) {
+ if (i < package->ret_info3.count) {
+
+ /* These are the required package elements (0, 1, or 2) */
+
+ status =
+ acpi_ns_check_object_type(data, elements,
+ package->
+ ret_info3.
+ object_type[i],
+ i);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+ } else {
+ /* These are the optional package elements */
+
+ status =
+ acpi_ns_check_object_type(data, elements,
+ package->
+ ret_info3.
+ tail_object_type,
+ i);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+ }
+ elements++;
+ }
+ break;
+
+ case ACPI_PTYPE2_REV_FIXED:
+
+ /* First element is the (Integer) revision */
+
+ status = acpi_ns_check_object_type(data, elements,
+ ACPI_RTYPE_INTEGER, 0);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+
+ elements++;
+ count--;
+
+ /* Examine the sub-packages */
+
+ status =
+ acpi_ns_check_package_list(data, package, elements, count);
+ break;
+
+ case ACPI_PTYPE2_PKG_COUNT:
+
+ /* First element is the (Integer) count of sub-packages to follow */
+
+ status = acpi_ns_check_object_type(data, elements,
+ ACPI_RTYPE_INTEGER, 0);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+
+ /*
+ * Count cannot be larger than the parent package length, but allow it
+ * to be smaller. The >= accounts for the Integer above.
+ */
+ expected_count = (u32)(*elements)->integer.value;
+ if (expected_count >= count) {
+ goto package_too_small;
+ }
+
+ count = expected_count;
+ elements++;
+
+ /* Examine the sub-packages */
+
+ status =
+ acpi_ns_check_package_list(data, package, elements, count);
+ break;
+
+ case ACPI_PTYPE2:
+ case ACPI_PTYPE2_FIXED:
+ case ACPI_PTYPE2_MIN:
+ case ACPI_PTYPE2_COUNT:
+ case ACPI_PTYPE2_FIX_VAR:
+
+ /*
+ * These types all return a single Package that consists of a
+ * variable number of sub-Packages.
+ *
+ * First, ensure that the first element is a sub-Package. If not,
+ * the BIOS may have incorrectly returned the object as a single
+ * package instead of a Package of Packages (a common error if
+ * there is only one entry). We may be able to repair this by
+ * wrapping the returned Package with a new outer Package.
+ */
+ if (*elements
+ && ((*elements)->common.type != ACPI_TYPE_PACKAGE)) {
+
+ /* Create the new outer package and populate it */
+
+ status =
+ acpi_ns_wrap_with_package(data, return_object,
+ return_object_ptr);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+
+ /* Update locals to point to the new package (of 1 element) */
+
+ return_object = *return_object_ptr;
+ elements = return_object->package.elements;
+ count = 1;
+ }
+
+ /* Examine the sub-packages */
+
+ status =
+ acpi_ns_check_package_list(data, package, elements, count);
+ break;
+
+ default:
+
+ /* Should not get here if predefined info table is correct */
+
+ ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
+ "Invalid internal return type in table entry: %X",
+ package->ret_info.type));
+
+ return (AE_AML_INTERNAL);
+ }
+
+ return (status);
+
+ package_too_small:
+
+ /* Error exit for the case with an incorrect package count */
+
+ ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
+ "Return Package is too small - found %u elements, expected %u",
+ count, expected_count));
+
+ return (AE_AML_OPERAND_VALUE);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ns_check_package_list
+ *
+ * PARAMETERS: data - Pointer to validation data structure
+ * package - Pointer to package-specific info for method
+ * elements - Element list of parent package. All elements
+ * of this list should be of type Package.
+ * count - Count of subpackages
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Examine a list of subpackages
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ns_check_package_list(struct acpi_predefined_data *data,
+ const union acpi_predefined_info *package,
+ union acpi_operand_object **elements, u32 count)
+{
+ union acpi_operand_object *sub_package;
+ union acpi_operand_object **sub_elements;
+ acpi_status status;
+ u32 expected_count;
+ u32 i;
+ u32 j;
+
+ /*
+ * Validate each sub-Package in the parent Package
+ *
+ * NOTE: assumes list of sub-packages contains no NULL elements.
+ * Any NULL elements should have been removed by earlier call
+ * to acpi_ns_remove_null_elements.
+ */
+ for (i = 0; i < count; i++) {
+ sub_package = *elements;
+ sub_elements = sub_package->package.elements;
+ data->parent_package = sub_package;
+
+ /* Each sub-object must be of type Package */
+
+ status = acpi_ns_check_object_type(data, &sub_package,
+ ACPI_RTYPE_PACKAGE, i);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+
+ /* Examine the different types of expected sub-packages */
+
+ data->parent_package = sub_package;
+ switch (package->ret_info.type) {
+ case ACPI_PTYPE2:
+ case ACPI_PTYPE2_PKG_COUNT:
+ case ACPI_PTYPE2_REV_FIXED:
+
+ /* Each subpackage has a fixed number of elements */
+
+ expected_count =
+ package->ret_info.count1 + package->ret_info.count2;
+ if (sub_package->package.count < expected_count) {
+ goto package_too_small;
+ }
+
+ status =
+ acpi_ns_check_package_elements(data, sub_elements,
+ package->ret_info.
+ object_type1,
+ package->ret_info.
+ count1,
+ package->ret_info.
+ object_type2,
+ package->ret_info.
+ count2, 0);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+ break;
+
+ case ACPI_PTYPE2_FIX_VAR:
+ /*
+ * Each subpackage has a fixed number of elements and an
+ * optional element
+ */
+ expected_count =
+ package->ret_info.count1 + package->ret_info.count2;
+ if (sub_package->package.count < expected_count) {
+ goto package_too_small;
+ }
+
+ status =
+ acpi_ns_check_package_elements(data, sub_elements,
+ package->ret_info.
+ object_type1,
+ package->ret_info.
+ count1,
+ package->ret_info.
+ object_type2,
+ sub_package->package.
+ count -
+ package->ret_info.
+ count1, 0);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+ break;
+
+ case ACPI_PTYPE2_FIXED:
+
+ /* Each sub-package has a fixed length */
+
+ expected_count = package->ret_info2.count;
+ if (sub_package->package.count < expected_count) {
+ goto package_too_small;
+ }
+
+ /* Check the type of each sub-package element */
+
+ for (j = 0; j < expected_count; j++) {
+ status =
+ acpi_ns_check_object_type(data,
+ &sub_elements[j],
+ package->
+ ret_info2.
+ object_type[j],
+ j);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+ }
+ break;
+
+ case ACPI_PTYPE2_MIN:
+
+ /* Each sub-package has a variable but minimum length */
+
+ expected_count = package->ret_info.count1;
+ if (sub_package->package.count < expected_count) {
+ goto package_too_small;
+ }
+
+ /* Check the type of each sub-package element */
+
+ status =
+ acpi_ns_check_package_elements(data, sub_elements,
+ package->ret_info.
+ object_type1,
+ sub_package->package.
+ count, 0, 0, 0);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+ break;
+
+ case ACPI_PTYPE2_COUNT:
+
+ /*
+ * First element is the (Integer) count of elements, including
+ * the count field (the ACPI name is num_elements)
+ */
+ status = acpi_ns_check_object_type(data, sub_elements,
+ ACPI_RTYPE_INTEGER,
+ 0);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+
+ /*
+ * Make sure package is large enough for the Count and is
+ * is as large as the minimum size
+ */
+ expected_count = (u32)(*sub_elements)->integer.value;
+ if (sub_package->package.count < expected_count) {
+ goto package_too_small;
+ }
+ if (sub_package->package.count <
+ package->ret_info.count1) {
+ expected_count = package->ret_info.count1;
+ goto package_too_small;
+ }
+ if (expected_count == 0) {
+ /*
+ * Either the num_entries element was originally zero or it was
+ * a NULL element and repaired to an Integer of value zero.
+ * In either case, repair it by setting num_entries to be the
+ * actual size of the subpackage.
+ */
+ expected_count = sub_package->package.count;
+ (*sub_elements)->integer.value = expected_count;
+ }
+
+ /* Check the type of each sub-package element */
+
+ status =
+ acpi_ns_check_package_elements(data,
+ (sub_elements + 1),
+ package->ret_info.
+ object_type1,
+ (expected_count - 1),
+ 0, 0, 1);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+ break;
+
+ default: /* Should not get here, type was validated by caller */
+
+ return (AE_AML_INTERNAL);
+ }
+
+ elements++;
+ }
+
+ return (AE_OK);
+
+ package_too_small:
+
+ /* The sub-package count was smaller than required */
+
+ ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
+ "Return Sub-Package[%u] is too small - found %u elements, expected %u",
+ i, sub_package->package.count, expected_count));
+
+ return (AE_AML_OPERAND_VALUE);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ns_check_package_elements
+ *
+ * PARAMETERS: data - Pointer to validation data structure
+ * elements - Pointer to the package elements array
+ * type1 - Object type for first group
+ * count1 - Count for first group
+ * type2 - Object type for second group
+ * count2 - Count for second group
+ * start_index - Start of the first group of elements
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Check that all elements of a package are of the correct object
+ * type. Supports up to two groups of different object types.
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ns_check_package_elements(struct acpi_predefined_data *data,
+ union acpi_operand_object **elements,
+ u8 type1,
+ u32 count1,
+ u8 type2, u32 count2, u32 start_index)
+{
+ union acpi_operand_object **this_element = elements;
+ acpi_status status;
+ u32 i;
+
+ /*
+ * Up to two groups of package elements are supported by the data
+ * structure. All elements in each group must be of the same type.
+ * The second group can have a count of zero.
+ */
+ for (i = 0; i < count1; i++) {
+ status = acpi_ns_check_object_type(data, this_element,
+ type1, i + start_index);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+ this_element++;
+ }
+
+ for (i = 0; i < count2; i++) {
+ status = acpi_ns_check_object_type(data, this_element,
+ type2,
+ (i + count1 + start_index));
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+ this_element++;
+ }
+
+ return (AE_OK);
+}