| /* |
| * File: drivers/pci/pcie/aspm.c |
| * Enabling PCIe link L0s/L1 state and Clock Power Management |
| * |
| * Copyright (C) 2007 Intel |
| * Copyright (C) Zhang Yanmin (yanmin.zhang@intel.com) |
| * Copyright (C) Shaohua Li (shaohua.li@intel.com) |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/pci.h> |
| #include <linux/pci_regs.h> |
| #include <linux/errno.h> |
| #include <linux/pm.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/jiffies.h> |
| #include <linux/delay.h> |
| #include <linux/pci-aspm.h> |
| #include "../pci.h" |
| |
| #ifdef MODULE_PARAM_PREFIX |
| #undef MODULE_PARAM_PREFIX |
| #endif |
| #define MODULE_PARAM_PREFIX "pcie_aspm." |
| |
| /* Note: those are not register definitions */ |
| #define ASPM_STATE_L0S_UP (1) /* Upstream direction L0s state */ |
| #define ASPM_STATE_L0S_DW (2) /* Downstream direction L0s state */ |
| #define ASPM_STATE_L1 (4) /* L1 state */ |
| #define ASPM_STATE_L0S (ASPM_STATE_L0S_UP | ASPM_STATE_L0S_DW) |
| #define ASPM_STATE_ALL (ASPM_STATE_L0S | ASPM_STATE_L1) |
| |
| struct aspm_latency { |
| u32 l0s; /* L0s latency (nsec) */ |
| u32 l1; /* L1 latency (nsec) */ |
| }; |
| |
| struct pcie_link_state { |
| struct pci_dev *pdev; /* Upstream component of the Link */ |
| struct pcie_link_state *root; /* pointer to the root port link */ |
| struct pcie_link_state *parent; /* pointer to the parent Link state */ |
| struct list_head sibling; /* node in link_list */ |
| struct list_head children; /* list of child link states */ |
| struct list_head link; /* node in parent's children list */ |
| |
| /* ASPM state */ |
| u32 aspm_support:3; /* Supported ASPM state */ |
| u32 aspm_enabled:3; /* Enabled ASPM state */ |
| u32 aspm_capable:3; /* Capable ASPM state with latency */ |
| u32 aspm_default:3; /* Default ASPM state by BIOS */ |
| u32 aspm_disable:3; /* Disabled ASPM state */ |
| |
| /* Clock PM state */ |
| u32 clkpm_capable:1; /* Clock PM capable? */ |
| u32 clkpm_enabled:1; /* Current Clock PM state */ |
| u32 clkpm_default:1; /* Default Clock PM state by BIOS */ |
| |
| /* Exit latencies */ |
| struct aspm_latency latency_up; /* Upstream direction exit latency */ |
| struct aspm_latency latency_dw; /* Downstream direction exit latency */ |
| /* |
| * Endpoint acceptable latencies. A pcie downstream port only |
| * has one slot under it, so at most there are 8 functions. |
| */ |
| struct aspm_latency acceptable[8]; |
| }; |
| |
| static int aspm_disabled, aspm_force; |
| static bool aspm_support_enabled = true; |
| static DEFINE_MUTEX(aspm_lock); |
| static LIST_HEAD(link_list); |
| |
| #define POLICY_DEFAULT 0 /* BIOS default setting */ |
| #define POLICY_PERFORMANCE 1 /* high performance */ |
| #define POLICY_POWERSAVE 2 /* high power saving */ |
| |
| #ifdef CONFIG_PCIEASPM_PERFORMANCE |
| static int aspm_policy = POLICY_PERFORMANCE; |
| #elif defined CONFIG_PCIEASPM_POWERSAVE |
| static int aspm_policy = POLICY_POWERSAVE; |
| #else |
| static int aspm_policy; |
| #endif |
| |
| static const char *policy_str[] = { |
| [POLICY_DEFAULT] = "default", |
| [POLICY_PERFORMANCE] = "performance", |
| [POLICY_POWERSAVE] = "powersave" |
| }; |
| |
| #define LINK_RETRAIN_TIMEOUT HZ |
| |
| static int policy_to_aspm_state(struct pcie_link_state *link) |
| { |
| switch (aspm_policy) { |
| case POLICY_PERFORMANCE: |
| /* Disable ASPM and Clock PM */ |
| return 0; |
| case POLICY_POWERSAVE: |
| /* Enable ASPM L0s/L1 */ |
| return ASPM_STATE_ALL; |
| case POLICY_DEFAULT: |
| return link->aspm_default; |
| } |
| return 0; |
| } |
| |
| static int policy_to_clkpm_state(struct pcie_link_state *link) |
| { |
| switch (aspm_policy) { |
| case POLICY_PERFORMANCE: |
| /* Disable ASPM and Clock PM */ |
| return 0; |
| case POLICY_POWERSAVE: |
| /* Disable Clock PM */ |
| return 1; |
| case POLICY_DEFAULT: |
| return link->clkpm_default; |
| } |
| return 0; |
| } |
| |
| static void pcie_set_clkpm_nocheck(struct pcie_link_state *link, int enable) |
| { |
| struct pci_dev *child; |
| struct pci_bus *linkbus = link->pdev->subordinate; |
| |
| list_for_each_entry(child, &linkbus->devices, bus_list) { |
| if (enable) |
| pcie_capability_set_word(child, PCI_EXP_LNKCTL, |
| PCI_EXP_LNKCTL_CLKREQ_EN); |
| else |
| pcie_capability_clear_word(child, PCI_EXP_LNKCTL, |
| PCI_EXP_LNKCTL_CLKREQ_EN); |
| } |
| link->clkpm_enabled = !!enable; |
| } |
| |
| static void pcie_set_clkpm(struct pcie_link_state *link, int enable) |
| { |
| /* Don't enable Clock PM if the link is not Clock PM capable */ |
| if (!link->clkpm_capable && enable) |
| enable = 0; |
| /* Need nothing if the specified equals to current state */ |
| if (link->clkpm_enabled == enable) |
| return; |
| pcie_set_clkpm_nocheck(link, enable); |
| } |
| |
| static void pcie_clkpm_cap_init(struct pcie_link_state *link, int blacklist) |
| { |
| int capable = 1, enabled = 1; |
| u32 reg32; |
| u16 reg16; |
| struct pci_dev *child; |
| struct pci_bus *linkbus = link->pdev->subordinate; |
| |
| /* All functions should have the same cap and state, take the worst */ |
| list_for_each_entry(child, &linkbus->devices, bus_list) { |
| pcie_capability_read_dword(child, PCI_EXP_LNKCAP, ®32); |
| if (!(reg32 & PCI_EXP_LNKCAP_CLKPM)) { |
| capable = 0; |
| enabled = 0; |
| break; |
| } |
| pcie_capability_read_word(child, PCI_EXP_LNKCTL, ®16); |
| if (!(reg16 & PCI_EXP_LNKCTL_CLKREQ_EN)) |
| enabled = 0; |
| } |
| link->clkpm_enabled = enabled; |
| link->clkpm_default = enabled; |
| link->clkpm_capable = (blacklist) ? 0 : capable; |
| } |
| |
| /* |
| * pcie_aspm_configure_common_clock: check if the 2 ends of a link |
| * could use common clock. If they are, configure them to use the |
| * common clock. That will reduce the ASPM state exit latency. |
| */ |
| static void pcie_aspm_configure_common_clock(struct pcie_link_state *link) |
| { |
| int same_clock = 1; |
| u16 reg16, parent_reg, child_reg[8]; |
| unsigned long start_jiffies; |
| struct pci_dev *child, *parent = link->pdev; |
| struct pci_bus *linkbus = parent->subordinate; |
| /* |
| * All functions of a slot should have the same Slot Clock |
| * Configuration, so just check one function |
| */ |
| child = list_entry(linkbus->devices.next, struct pci_dev, bus_list); |
| BUG_ON(!pci_is_pcie(child)); |
| |
| /* Check downstream component if bit Slot Clock Configuration is 1 */ |
| pcie_capability_read_word(child, PCI_EXP_LNKSTA, ®16); |
| if (!(reg16 & PCI_EXP_LNKSTA_SLC)) |
| same_clock = 0; |
| |
| /* Check upstream component if bit Slot Clock Configuration is 1 */ |
| pcie_capability_read_word(parent, PCI_EXP_LNKSTA, ®16); |
| if (!(reg16 & PCI_EXP_LNKSTA_SLC)) |
| same_clock = 0; |
| |
| /* Configure downstream component, all functions */ |
| list_for_each_entry(child, &linkbus->devices, bus_list) { |
| pcie_capability_read_word(child, PCI_EXP_LNKCTL, ®16); |
| child_reg[PCI_FUNC(child->devfn)] = reg16; |
| if (same_clock) |
| reg16 |= PCI_EXP_LNKCTL_CCC; |
| else |
| reg16 &= ~PCI_EXP_LNKCTL_CCC; |
| pcie_capability_write_word(child, PCI_EXP_LNKCTL, reg16); |
| } |
| |
| /* Configure upstream component */ |
| pcie_capability_read_word(parent, PCI_EXP_LNKCTL, ®16); |
| parent_reg = reg16; |
| if (same_clock) |
| reg16 |= PCI_EXP_LNKCTL_CCC; |
| else |
| reg16 &= ~PCI_EXP_LNKCTL_CCC; |
| pcie_capability_write_word(parent, PCI_EXP_LNKCTL, reg16); |
| |
| /* Retrain link */ |
| reg16 |= PCI_EXP_LNKCTL_RL; |
| pcie_capability_write_word(parent, PCI_EXP_LNKCTL, reg16); |
| |
| /* Wait for link training end. Break out after waiting for timeout */ |
| start_jiffies = jiffies; |
| for (;;) { |
| pcie_capability_read_word(parent, PCI_EXP_LNKSTA, ®16); |
| if (!(reg16 & PCI_EXP_LNKSTA_LT)) |
| break; |
| if (time_after(jiffies, start_jiffies + LINK_RETRAIN_TIMEOUT)) |
| break; |
| msleep(1); |
| } |
| if (!(reg16 & PCI_EXP_LNKSTA_LT)) |
| return; |
| |
| /* Training failed. Restore common clock configurations */ |
| dev_err(&parent->dev, "ASPM: Could not configure common clock\n"); |
| list_for_each_entry(child, &linkbus->devices, bus_list) |
| pcie_capability_write_word(child, PCI_EXP_LNKCTL, |
| child_reg[PCI_FUNC(child->devfn)]); |
| pcie_capability_write_word(parent, PCI_EXP_LNKCTL, parent_reg); |
| } |
| |
| /* Convert L0s latency encoding to ns */ |
| static u32 calc_l0s_latency(u32 encoding) |
| { |
| if (encoding == 0x7) |
| return (5 * 1000); /* > 4us */ |
| return (64 << encoding); |
| } |
| |
| /* Convert L0s acceptable latency encoding to ns */ |
| static u32 calc_l0s_acceptable(u32 encoding) |
| { |
| if (encoding == 0x7) |
| return -1U; |
| return (64 << encoding); |
| } |
| |
| /* Convert L1 latency encoding to ns */ |
| static u32 calc_l1_latency(u32 encoding) |
| { |
| if (encoding == 0x7) |
| return (65 * 1000); /* > 64us */ |
| return (1000 << encoding); |
| } |
| |
| /* Convert L1 acceptable latency encoding to ns */ |
| static u32 calc_l1_acceptable(u32 encoding) |
| { |
| if (encoding == 0x7) |
| return -1U; |
| return (1000 << encoding); |
| } |
| |
| struct aspm_register_info { |
| u32 support:2; |
| u32 enabled:2; |
| u32 latency_encoding_l0s; |
| u32 latency_encoding_l1; |
| }; |
| |
| static void pcie_get_aspm_reg(struct pci_dev *pdev, |
| struct aspm_register_info *info) |
| { |
| u16 reg16; |
| u32 reg32; |
| |
| pcie_capability_read_dword(pdev, PCI_EXP_LNKCAP, ®32); |
| info->support = (reg32 & PCI_EXP_LNKCAP_ASPMS) >> 10; |
| info->latency_encoding_l0s = (reg32 & PCI_EXP_LNKCAP_L0SEL) >> 12; |
| info->latency_encoding_l1 = (reg32 & PCI_EXP_LNKCAP_L1EL) >> 15; |
| pcie_capability_read_word(pdev, PCI_EXP_LNKCTL, ®16); |
| info->enabled = reg16 & PCI_EXP_LNKCTL_ASPMC; |
| } |
| |
| static void pcie_aspm_check_latency(struct pci_dev *endpoint) |
| { |
| u32 latency, l1_switch_latency = 0; |
| struct aspm_latency *acceptable; |
| struct pcie_link_state *link; |
| |
| /* Device not in D0 doesn't need latency check */ |
| if ((endpoint->current_state != PCI_D0) && |
| (endpoint->current_state != PCI_UNKNOWN)) |
| return; |
| |
| link = endpoint->bus->self->link_state; |
| acceptable = &link->acceptable[PCI_FUNC(endpoint->devfn)]; |
| |
| while (link) { |
| /* Check upstream direction L0s latency */ |
| if ((link->aspm_capable & ASPM_STATE_L0S_UP) && |
| (link->latency_up.l0s > acceptable->l0s)) |
| link->aspm_capable &= ~ASPM_STATE_L0S_UP; |
| |
| /* Check downstream direction L0s latency */ |
| if ((link->aspm_capable & ASPM_STATE_L0S_DW) && |
| (link->latency_dw.l0s > acceptable->l0s)) |
| link->aspm_capable &= ~ASPM_STATE_L0S_DW; |
| /* |
| * Check L1 latency. |
| * Every switch on the path to root complex need 1 |
| * more microsecond for L1. Spec doesn't mention L0s. |
| */ |
| latency = max_t(u32, link->latency_up.l1, link->latency_dw.l1); |
| if ((link->aspm_capable & ASPM_STATE_L1) && |
| (latency + l1_switch_latency > acceptable->l1)) |
| link->aspm_capable &= ~ASPM_STATE_L1; |
| l1_switch_latency += 1000; |
| |
| link = link->parent; |
| } |
| } |
| |
| static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist) |
| { |
| struct pci_dev *child, *parent = link->pdev; |
| struct pci_bus *linkbus = parent->subordinate; |
| struct aspm_register_info upreg, dwreg; |
| |
| if (blacklist) { |
| /* Set enabled/disable so that we will disable ASPM later */ |
| link->aspm_enabled = ASPM_STATE_ALL; |
| link->aspm_disable = ASPM_STATE_ALL; |
| return; |
| } |
| |
| /* Configure common clock before checking latencies */ |
| pcie_aspm_configure_common_clock(link); |
| |
| /* Get upstream/downstream components' register state */ |
| pcie_get_aspm_reg(parent, &upreg); |
| child = list_entry(linkbus->devices.next, struct pci_dev, bus_list); |
| pcie_get_aspm_reg(child, &dwreg); |
| |
| /* |
| * Setup L0s state |
| * |
| * Note that we must not enable L0s in either direction on a |
| * given link unless components on both sides of the link each |
| * support L0s. |
| */ |
| if (dwreg.support & upreg.support & PCIE_LINK_STATE_L0S) |
| link->aspm_support |= ASPM_STATE_L0S; |
| if (dwreg.enabled & PCIE_LINK_STATE_L0S) |
| link->aspm_enabled |= ASPM_STATE_L0S_UP; |
| if (upreg.enabled & PCIE_LINK_STATE_L0S) |
| link->aspm_enabled |= ASPM_STATE_L0S_DW; |
| link->latency_up.l0s = calc_l0s_latency(upreg.latency_encoding_l0s); |
| link->latency_dw.l0s = calc_l0s_latency(dwreg.latency_encoding_l0s); |
| |
| /* Setup L1 state */ |
| if (upreg.support & dwreg.support & PCIE_LINK_STATE_L1) |
| link->aspm_support |= ASPM_STATE_L1; |
| if (upreg.enabled & dwreg.enabled & PCIE_LINK_STATE_L1) |
| link->aspm_enabled |= ASPM_STATE_L1; |
| link->latency_up.l1 = calc_l1_latency(upreg.latency_encoding_l1); |
| link->latency_dw.l1 = calc_l1_latency(dwreg.latency_encoding_l1); |
| |
| /* Save default state */ |
| link->aspm_default = link->aspm_enabled; |
| |
| /* Setup initial capable state. Will be updated later */ |
| link->aspm_capable = link->aspm_support; |
| /* |
| * If the downstream component has pci bridge function, don't |
| * do ASPM for now. |
| */ |
| list_for_each_entry(child, &linkbus->devices, bus_list) { |
| if (pci_pcie_type(child) == PCI_EXP_TYPE_PCI_BRIDGE) { |
| link->aspm_disable = ASPM_STATE_ALL; |
| break; |
| } |
| } |
| |
| /* Get and check endpoint acceptable latencies */ |
| list_for_each_entry(child, &linkbus->devices, bus_list) { |
| u32 reg32, encoding; |
| struct aspm_latency *acceptable = |
| &link->acceptable[PCI_FUNC(child->devfn)]; |
| |
| if (pci_pcie_type(child) != PCI_EXP_TYPE_ENDPOINT && |
| pci_pcie_type(child) != PCI_EXP_TYPE_LEG_END) |
| continue; |
| |
| pcie_capability_read_dword(child, PCI_EXP_DEVCAP, ®32); |
| /* Calculate endpoint L0s acceptable latency */ |
| encoding = (reg32 & PCI_EXP_DEVCAP_L0S) >> 6; |
| acceptable->l0s = calc_l0s_acceptable(encoding); |
| /* Calculate endpoint L1 acceptable latency */ |
| encoding = (reg32 & PCI_EXP_DEVCAP_L1) >> 9; |
| acceptable->l1 = calc_l1_acceptable(encoding); |
| |
| pcie_aspm_check_latency(child); |
| } |
| } |
| |
| static void pcie_config_aspm_dev(struct pci_dev *pdev, u32 val) |
| { |
| pcie_capability_clear_and_set_word(pdev, PCI_EXP_LNKCTL, 0x3, val); |
| } |
| |
| static void pcie_config_aspm_link(struct pcie_link_state *link, u32 state) |
| { |
| u32 upstream = 0, dwstream = 0; |
| struct pci_dev *child, *parent = link->pdev; |
| struct pci_bus *linkbus = parent->subordinate; |
| |
| /* Nothing to do if the link is already in the requested state */ |
| state &= (link->aspm_capable & ~link->aspm_disable); |
| if (link->aspm_enabled == state) |
| return; |
| /* Convert ASPM state to upstream/downstream ASPM register state */ |
| if (state & ASPM_STATE_L0S_UP) |
| dwstream |= PCIE_LINK_STATE_L0S; |
| if (state & ASPM_STATE_L0S_DW) |
| upstream |= PCIE_LINK_STATE_L0S; |
| if (state & ASPM_STATE_L1) { |
| upstream |= PCIE_LINK_STATE_L1; |
| dwstream |= PCIE_LINK_STATE_L1; |
| } |
| /* |
| * Spec 2.0 suggests all functions should be configured the |
| * same setting for ASPM. Enabling ASPM L1 should be done in |
| * upstream component first and then downstream, and vice |
| * versa for disabling ASPM L1. Spec doesn't mention L0S. |
| */ |
| if (state & ASPM_STATE_L1) |
| pcie_config_aspm_dev(parent, upstream); |
| list_for_each_entry(child, &linkbus->devices, bus_list) |
| pcie_config_aspm_dev(child, dwstream); |
| if (!(state & ASPM_STATE_L1)) |
| pcie_config_aspm_dev(parent, upstream); |
| |
| link->aspm_enabled = state; |
| } |
| |
| static void pcie_config_aspm_path(struct pcie_link_state *link) |
| { |
| while (link) { |
| pcie_config_aspm_link(link, policy_to_aspm_state(link)); |
| link = link->parent; |
| } |
| } |
| |
| static void free_link_state(struct pcie_link_state *link) |
| { |
| link->pdev->link_state = NULL; |
| kfree(link); |
| } |
| |
| static int pcie_aspm_sanity_check(struct pci_dev *pdev) |
| { |
| struct pci_dev *child; |
| u32 reg32; |
| |
| /* |
| * Some functions in a slot might not all be PCIe functions, |
| * very strange. Disable ASPM for the whole slot |
| */ |
| list_for_each_entry(child, &pdev->subordinate->devices, bus_list) { |
| if (!pci_is_pcie(child)) |
| return -EINVAL; |
| |
| /* |
| * If ASPM is disabled then we're not going to change |
| * the BIOS state. It's safe to continue even if it's a |
| * pre-1.1 device |
| */ |
| |
| if (aspm_disabled) |
| continue; |
| |
| /* |
| * Disable ASPM for pre-1.1 PCIe device, we follow MS to use |
| * RBER bit to determine if a function is 1.1 version device |
| */ |
| pcie_capability_read_dword(child, PCI_EXP_DEVCAP, ®32); |
| if (!(reg32 & PCI_EXP_DEVCAP_RBER) && !aspm_force) { |
| dev_info(&child->dev, "disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'\n"); |
| return -EINVAL; |
| } |
| } |
| return 0; |
| } |
| |
| static struct pcie_link_state *alloc_pcie_link_state(struct pci_dev *pdev) |
| { |
| struct pcie_link_state *link; |
| |
| link = kzalloc(sizeof(*link), GFP_KERNEL); |
| if (!link) |
| return NULL; |
| INIT_LIST_HEAD(&link->sibling); |
| INIT_LIST_HEAD(&link->children); |
| INIT_LIST_HEAD(&link->link); |
| link->pdev = pdev; |
| if (pci_pcie_type(pdev) == PCI_EXP_TYPE_DOWNSTREAM) { |
| struct pcie_link_state *parent; |
| parent = pdev->bus->parent->self->link_state; |
| if (!parent) { |
| kfree(link); |
| return NULL; |
| } |
| link->parent = parent; |
| list_add(&link->link, &parent->children); |
| } |
| /* Setup a pointer to the root port link */ |
| if (!link->parent) |
| link->root = link; |
| else |
| link->root = link->parent->root; |
| |
| list_add(&link->sibling, &link_list); |
| pdev->link_state = link; |
| return link; |
| } |
| |
| /* |
| * pcie_aspm_init_link_state: Initiate PCI express link state. |
| * It is called after the pcie and its children devices are scaned. |
| * @pdev: the root port or switch downstream port |
| */ |
| void pcie_aspm_init_link_state(struct pci_dev *pdev) |
| { |
| struct pcie_link_state *link; |
| int blacklist = !!pcie_aspm_sanity_check(pdev); |
| |
| if (!pci_is_pcie(pdev) || pdev->link_state) |
| return; |
| if (pci_pcie_type(pdev) != PCI_EXP_TYPE_ROOT_PORT && |
| pci_pcie_type(pdev) != PCI_EXP_TYPE_DOWNSTREAM) |
| return; |
| |
| /* VIA has a strange chipset, root port is under a bridge */ |
| if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT && |
| pdev->bus->self) |
| return; |
| |
| down_read(&pci_bus_sem); |
| if (list_empty(&pdev->subordinate->devices)) |
| goto out; |
| |
| mutex_lock(&aspm_lock); |
| link = alloc_pcie_link_state(pdev); |
| if (!link) |
| goto unlock; |
| /* |
| * Setup initial ASPM state. Note that we need to configure |
| * upstream links also because capable state of them can be |
| * update through pcie_aspm_cap_init(). |
| */ |
| pcie_aspm_cap_init(link, blacklist); |
| |
| /* Setup initial Clock PM state */ |
| pcie_clkpm_cap_init(link, blacklist); |
| |
| /* |
| * At this stage drivers haven't had an opportunity to change the |
| * link policy setting. Enabling ASPM on broken hardware can cripple |
| * it even before the driver has had a chance to disable ASPM, so |
| * default to a safe level right now. If we're enabling ASPM beyond |
| * the BIOS's expectation, we'll do so once pci_enable_device() is |
| * called. |
| */ |
| if (aspm_policy != POLICY_POWERSAVE) { |
| pcie_config_aspm_path(link); |
| pcie_set_clkpm(link, policy_to_clkpm_state(link)); |
| } |
| |
| unlock: |
| mutex_unlock(&aspm_lock); |
| out: |
| up_read(&pci_bus_sem); |
| } |
| |
| /* Recheck latencies and update aspm_capable for links under the root */ |
| static void pcie_update_aspm_capable(struct pcie_link_state *root) |
| { |
| struct pcie_link_state *link; |
| BUG_ON(root->parent); |
| list_for_each_entry(link, &link_list, sibling) { |
| if (link->root != root) |
| continue; |
| link->aspm_capable = link->aspm_support; |
| } |
| list_for_each_entry(link, &link_list, sibling) { |
| struct pci_dev *child; |
| struct pci_bus *linkbus = link->pdev->subordinate; |
| if (link->root != root) |
| continue; |
| list_for_each_entry(child, &linkbus->devices, bus_list) { |
| if ((pci_pcie_type(child) != PCI_EXP_TYPE_ENDPOINT) && |
| (pci_pcie_type(child) != PCI_EXP_TYPE_LEG_END)) |
| continue; |
| pcie_aspm_check_latency(child); |
| } |
| } |
| } |
| |
| /* @pdev: the endpoint device */ |
| void pcie_aspm_exit_link_state(struct pci_dev *pdev) |
| { |
| struct pci_dev *parent = pdev->bus->self; |
| struct pcie_link_state *link, *root, *parent_link; |
| |
| if (!pci_is_pcie(pdev) || !parent || !parent->link_state) |
| return; |
| if ((pci_pcie_type(parent) != PCI_EXP_TYPE_ROOT_PORT) && |
| (pci_pcie_type(parent) != PCI_EXP_TYPE_DOWNSTREAM)) |
| return; |
| |
| down_read(&pci_bus_sem); |
| mutex_lock(&aspm_lock); |
| /* |
| * All PCIe functions are in one slot, remove one function will remove |
| * the whole slot, so just wait until we are the last function left. |
| */ |
| if (!list_is_last(&pdev->bus_list, &parent->subordinate->devices)) |
| goto out; |
| |
| link = parent->link_state; |
| root = link->root; |
| parent_link = link->parent; |
| |
| /* All functions are removed, so just disable ASPM for the link */ |
| pcie_config_aspm_link(link, 0); |
| list_del(&link->sibling); |
| list_del(&link->link); |
| /* Clock PM is for endpoint device */ |
| free_link_state(link); |
| |
| /* Recheck latencies and configure upstream links */ |
| if (parent_link) { |
| pcie_update_aspm_capable(root); |
| pcie_config_aspm_path(parent_link); |
| } |
| out: |
| mutex_unlock(&aspm_lock); |
| up_read(&pci_bus_sem); |
| } |
| |
| /* @pdev: the root port or switch downstream port */ |
| void pcie_aspm_pm_state_change(struct pci_dev *pdev) |
| { |
| struct pcie_link_state *link = pdev->link_state; |
| |
| if (aspm_disabled || !pci_is_pcie(pdev) || !link) |
| return; |
| if ((pci_pcie_type(pdev) != PCI_EXP_TYPE_ROOT_PORT) && |
| (pci_pcie_type(pdev) != PCI_EXP_TYPE_DOWNSTREAM)) |
| return; |
| /* |
| * Devices changed PM state, we should recheck if latency |
| * meets all functions' requirement |
| */ |
| down_read(&pci_bus_sem); |
| mutex_lock(&aspm_lock); |
| pcie_update_aspm_capable(link->root); |
| pcie_config_aspm_path(link); |
| mutex_unlock(&aspm_lock); |
| up_read(&pci_bus_sem); |
| } |
| |
| void pcie_aspm_powersave_config_link(struct pci_dev *pdev) |
| { |
| struct pcie_link_state *link = pdev->link_state; |
| |
| if (aspm_disabled || !pci_is_pcie(pdev) || !link) |
| return; |
| |
| if (aspm_policy != POLICY_POWERSAVE) |
| return; |
| |
| if ((pci_pcie_type(pdev) != PCI_EXP_TYPE_ROOT_PORT) && |
| (pci_pcie_type(pdev) != PCI_EXP_TYPE_DOWNSTREAM)) |
| return; |
| |
| down_read(&pci_bus_sem); |
| mutex_lock(&aspm_lock); |
| pcie_config_aspm_path(link); |
| pcie_set_clkpm(link, policy_to_clkpm_state(link)); |
| mutex_unlock(&aspm_lock); |
| up_read(&pci_bus_sem); |
| } |
| |
| /* |
| * pci_disable_link_state - disable pci device's link state, so the link will |
| * never enter specific states |
| */ |
| static void __pci_disable_link_state(struct pci_dev *pdev, int state, bool sem, |
| bool force) |
| { |
| struct pci_dev *parent = pdev->bus->self; |
| struct pcie_link_state *link; |
| |
| if (aspm_disabled && !force) |
| return; |
| |
| if (!pci_is_pcie(pdev)) |
| return; |
| |
| if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT || |
| pci_pcie_type(pdev) == PCI_EXP_TYPE_DOWNSTREAM) |
| parent = pdev; |
| if (!parent || !parent->link_state) |
| return; |
| |
| if (sem) |
| down_read(&pci_bus_sem); |
| mutex_lock(&aspm_lock); |
| link = parent->link_state; |
| if (state & PCIE_LINK_STATE_L0S) |
| link->aspm_disable |= ASPM_STATE_L0S; |
| if (state & PCIE_LINK_STATE_L1) |
| link->aspm_disable |= ASPM_STATE_L1; |
| pcie_config_aspm_link(link, policy_to_aspm_state(link)); |
| |
| if (state & PCIE_LINK_STATE_CLKPM) { |
| link->clkpm_capable = 0; |
| pcie_set_clkpm(link, 0); |
| } |
| mutex_unlock(&aspm_lock); |
| if (sem) |
| up_read(&pci_bus_sem); |
| } |
| |
| void pci_disable_link_state_locked(struct pci_dev *pdev, int state) |
| { |
| __pci_disable_link_state(pdev, state, false, false); |
| } |
| EXPORT_SYMBOL(pci_disable_link_state_locked); |
| |
| void pci_disable_link_state(struct pci_dev *pdev, int state) |
| { |
| __pci_disable_link_state(pdev, state, true, false); |
| } |
| EXPORT_SYMBOL(pci_disable_link_state); |
| |
| void pcie_clear_aspm(struct pci_bus *bus) |
| { |
| struct pci_dev *child; |
| |
| /* |
| * Clear any ASPM setup that the firmware has carried out on this bus |
| */ |
| list_for_each_entry(child, &bus->devices, bus_list) { |
| __pci_disable_link_state(child, PCIE_LINK_STATE_L0S | |
| PCIE_LINK_STATE_L1 | |
| PCIE_LINK_STATE_CLKPM, |
| false, true); |
| } |
| } |
| |
| static int pcie_aspm_set_policy(const char *val, struct kernel_param *kp) |
| { |
| int i; |
| struct pcie_link_state *link; |
| |
| if (aspm_disabled) |
| return -EPERM; |
| for (i = 0; i < ARRAY_SIZE(policy_str); i++) |
| if (!strncmp(val, policy_str[i], strlen(policy_str[i]))) |
| break; |
| if (i >= ARRAY_SIZE(policy_str)) |
| return -EINVAL; |
| if (i == aspm_policy) |
| return 0; |
| |
| down_read(&pci_bus_sem); |
| mutex_lock(&aspm_lock); |
| aspm_policy = i; |
| list_for_each_entry(link, &link_list, sibling) { |
| pcie_config_aspm_link(link, policy_to_aspm_state(link)); |
| pcie_set_clkpm(link, policy_to_clkpm_state(link)); |
| } |
| mutex_unlock(&aspm_lock); |
| up_read(&pci_bus_sem); |
| return 0; |
| } |
| |
| static int pcie_aspm_get_policy(char *buffer, struct kernel_param *kp) |
| { |
| int i, cnt = 0; |
| for (i = 0; i < ARRAY_SIZE(policy_str); i++) |
| if (i == aspm_policy) |
| cnt += sprintf(buffer + cnt, "[%s] ", policy_str[i]); |
| else |
| cnt += sprintf(buffer + cnt, "%s ", policy_str[i]); |
| return cnt; |
| } |
| |
| module_param_call(policy, pcie_aspm_set_policy, pcie_aspm_get_policy, |
| NULL, 0644); |
| |
| #ifdef CONFIG_PCIEASPM_DEBUG |
| static ssize_t link_state_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct pci_dev *pci_device = to_pci_dev(dev); |
| struct pcie_link_state *link_state = pci_device->link_state; |
| |
| return sprintf(buf, "%d\n", link_state->aspm_enabled); |
| } |
| |
| static ssize_t link_state_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, |
| size_t n) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| struct pcie_link_state *link, *root = pdev->link_state->root; |
| u32 val = buf[0] - '0', state = 0; |
| |
| if (aspm_disabled) |
| return -EPERM; |
| if (n < 1 || val > 3) |
| return -EINVAL; |
| |
| /* Convert requested state to ASPM state */ |
| if (val & PCIE_LINK_STATE_L0S) |
| state |= ASPM_STATE_L0S; |
| if (val & PCIE_LINK_STATE_L1) |
| state |= ASPM_STATE_L1; |
| |
| down_read(&pci_bus_sem); |
| mutex_lock(&aspm_lock); |
| list_for_each_entry(link, &link_list, sibling) { |
| if (link->root != root) |
| continue; |
| pcie_config_aspm_link(link, state); |
| } |
| mutex_unlock(&aspm_lock); |
| up_read(&pci_bus_sem); |
| return n; |
| } |
| |
| static ssize_t clk_ctl_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct pci_dev *pci_device = to_pci_dev(dev); |
| struct pcie_link_state *link_state = pci_device->link_state; |
| |
| return sprintf(buf, "%d\n", link_state->clkpm_enabled); |
| } |
| |
| static ssize_t clk_ctl_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, |
| size_t n) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| int state; |
| |
| if (n < 1) |
| return -EINVAL; |
| state = buf[0]-'0'; |
| |
| down_read(&pci_bus_sem); |
| mutex_lock(&aspm_lock); |
| pcie_set_clkpm_nocheck(pdev->link_state, !!state); |
| mutex_unlock(&aspm_lock); |
| up_read(&pci_bus_sem); |
| |
| return n; |
| } |
| |
| static DEVICE_ATTR(link_state, 0644, link_state_show, link_state_store); |
| static DEVICE_ATTR(clk_ctl, 0644, clk_ctl_show, clk_ctl_store); |
| |
| static char power_group[] = "power"; |
| void pcie_aspm_create_sysfs_dev_files(struct pci_dev *pdev) |
| { |
| struct pcie_link_state *link_state = pdev->link_state; |
| |
| if (!pci_is_pcie(pdev) || |
| (pci_pcie_type(pdev) != PCI_EXP_TYPE_ROOT_PORT && |
| pci_pcie_type(pdev) != PCI_EXP_TYPE_DOWNSTREAM) || !link_state) |
| return; |
| |
| if (link_state->aspm_support) |
| sysfs_add_file_to_group(&pdev->dev.kobj, |
| &dev_attr_link_state.attr, power_group); |
| if (link_state->clkpm_capable) |
| sysfs_add_file_to_group(&pdev->dev.kobj, |
| &dev_attr_clk_ctl.attr, power_group); |
| } |
| |
| void pcie_aspm_remove_sysfs_dev_files(struct pci_dev *pdev) |
| { |
| struct pcie_link_state *link_state = pdev->link_state; |
| |
| if (!pci_is_pcie(pdev) || |
| (pci_pcie_type(pdev) != PCI_EXP_TYPE_ROOT_PORT && |
| pci_pcie_type(pdev) != PCI_EXP_TYPE_DOWNSTREAM) || !link_state) |
| return; |
| |
| if (link_state->aspm_support) |
| sysfs_remove_file_from_group(&pdev->dev.kobj, |
| &dev_attr_link_state.attr, power_group); |
| if (link_state->clkpm_capable) |
| sysfs_remove_file_from_group(&pdev->dev.kobj, |
| &dev_attr_clk_ctl.attr, power_group); |
| } |
| #endif |
| |
| static int __init pcie_aspm_disable(char *str) |
| { |
| if (!strcmp(str, "off")) { |
| aspm_policy = POLICY_DEFAULT; |
| aspm_disabled = 1; |
| aspm_support_enabled = false; |
| printk(KERN_INFO "PCIe ASPM is disabled\n"); |
| } else if (!strcmp(str, "force")) { |
| aspm_force = 1; |
| printk(KERN_INFO "PCIe ASPM is forcibly enabled\n"); |
| } |
| return 1; |
| } |
| |
| __setup("pcie_aspm=", pcie_aspm_disable); |
| |
| void pcie_no_aspm(void) |
| { |
| /* |
| * Disabling ASPM is intended to prevent the kernel from modifying |
| * existing hardware state, not to clear existing state. To that end: |
| * (a) set policy to POLICY_DEFAULT in order to avoid changing state |
| * (b) prevent userspace from changing policy |
| */ |
| if (!aspm_force) { |
| aspm_policy = POLICY_DEFAULT; |
| aspm_disabled = 1; |
| } |
| } |
| |
| /** |
| * pcie_aspm_enabled - is PCIe ASPM enabled? |
| * |
| * Returns true if ASPM has not been disabled by the command-line option |
| * pcie_aspm=off. |
| **/ |
| int pcie_aspm_enabled(void) |
| { |
| return !aspm_disabled; |
| } |
| EXPORT_SYMBOL(pcie_aspm_enabled); |
| |
| bool pcie_aspm_support_enabled(void) |
| { |
| return aspm_support_enabled; |
| } |
| EXPORT_SYMBOL(pcie_aspm_support_enabled); |