ath9k: implement .get_antenna and .set_antenna
On MIMO chips this can be used to enable/disable hardware chains, ensuring
that the MCS information is updated accordingly.
On non-MIMO chips with rx diversity (e.g. 9285), this configures the rx
input antenna.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index be302fb..9b34c4b 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -653,9 +653,22 @@
ah->curchan = curchan;
}
+void ath9k_reload_chainmask_settings(struct ath_softc *sc)
+{
+ if (!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT))
+ return;
+
+ if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ)
+ setup_ht_cap(sc, &sc->sbands[IEEE80211_BAND_2GHZ].ht_cap);
+ if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_5GHZ)
+ setup_ht_cap(sc, &sc->sbands[IEEE80211_BAND_5GHZ].ht_cap);
+}
+
+
void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
{
- struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
@@ -693,6 +706,16 @@
hw->sta_data_size = sizeof(struct ath_node);
hw->vif_data_size = sizeof(struct ath_vif);
+ hw->wiphy->available_antennas_rx = BIT(ah->caps.max_rxchains) - 1;
+ hw->wiphy->available_antennas_tx = BIT(ah->caps.max_txchains) - 1;
+
+ /* single chain devices with rx diversity */
+ if (ah->caps.hw_caps & ATH9K_HW_CAP_ANT_DIV_COMB)
+ hw->wiphy->available_antennas_rx = BIT(0) | BIT(1);
+
+ sc->ant_rx = hw->wiphy->available_antennas_rx;
+ sc->ant_tx = hw->wiphy->available_antennas_tx;
+
#ifdef CONFIG_ATH9K_RATE_CONTROL
hw->rate_control_algorithm = "ath9k_rate_control";
#endif
@@ -704,12 +727,7 @@
hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
&sc->sbands[IEEE80211_BAND_5GHZ];
- if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
- if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ)
- setup_ht_cap(sc, &sc->sbands[IEEE80211_BAND_2GHZ].ht_cap);
- if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_5GHZ)
- setup_ht_cap(sc, &sc->sbands[IEEE80211_BAND_5GHZ].ht_cap);
- }
+ ath9k_reload_chainmask_settings(sc);
SET_IEEE80211_PERM_ADDR(hw, common->macaddr);
}