drivers/scsi/mpt2sas/mpt2sas_ctl.h - kernel/msm-4.19 - Gitiles

 /*
  * Management Module Support for MPT (Message Passing Technology) based
  * controllers
  *
  * This code is based on drivers/scsi/mpt2sas/mpt2_ctl.h
  * Copyright (C) 2007-2009  LSI Corporation
  *  (mailto:DL-MPTFusionLinux@lsi.com)
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version 2
  * of the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * NO WARRANTY
  * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
  * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
  * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
  * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
  * solely responsible for determining the appropriateness of using and
  * distributing the Program and assumes all risks associated with its
  * exercise of rights under this Agreement, including but not limited to
  * the risks and costs of program errors, damage to or loss of data,
  * programs or equipment, and unavailability or interruption of operations.

  * DISCLAIMER OF LIABILITY
  * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
  * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
  * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
  * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES

  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
  * USA.
  */

 #ifndef MPT2SAS_CTL_H_INCLUDED
 #define MPT2SAS_CTL_H_INCLUDED

 #ifdef __KERNEL__
 #include <linux/miscdevice.h>
 #endif

 #define MPT2SAS_DEV_NAME	"mpt2ctl"
 #define MPT2_MAGIC_NUMBER	'L'
 #define MPT2_IOCTL_DEFAULT_TIMEOUT (10) /* in seconds */

 /**
  * IOCTL opcodes
  */
 #define MPT2IOCINFO	_IOWR(MPT2_MAGIC_NUMBER, 17, \
     struct mpt2_ioctl_iocinfo)
 #define MPT2COMMAND	_IOWR(MPT2_MAGIC_NUMBER, 20, \
     struct mpt2_ioctl_command)
 #ifdef CONFIG_COMPAT
 #define MPT2COMMAND32	_IOWR(MPT2_MAGIC_NUMBER, 20, \
     struct mpt2_ioctl_command32)
 #endif
 #define MPT2EVENTQUERY	_IOWR(MPT2_MAGIC_NUMBER, 21, \
     struct mpt2_ioctl_eventquery)
 #define MPT2EVENTENABLE	_IOWR(MPT2_MAGIC_NUMBER, 22, \
     struct mpt2_ioctl_eventenable)
 #define MPT2EVENTREPORT	_IOWR(MPT2_MAGIC_NUMBER, 23, \
     struct mpt2_ioctl_eventreport)
 #define MPT2HARDRESET	_IOWR(MPT2_MAGIC_NUMBER, 24, \
     struct mpt2_ioctl_diag_reset)
 #define MPT2BTDHMAPPING	_IOWR(MPT2_MAGIC_NUMBER, 31, \
     struct mpt2_ioctl_btdh_mapping)

 /* diag buffer support */
 #define MPT2DIAGREGISTER _IOWR(MPT2_MAGIC_NUMBER, 26, \
     struct mpt2_diag_register)
 #define MPT2DIAGRELEASE	_IOWR(MPT2_MAGIC_NUMBER, 27, \
     struct mpt2_diag_release)
 #define MPT2DIAGUNREGISTER _IOWR(MPT2_MAGIC_NUMBER, 28, \
     struct mpt2_diag_unregister)
 #define MPT2DIAGQUERY	_IOWR(MPT2_MAGIC_NUMBER, 29, \
     struct mpt2_diag_query)
 #define MPT2DIAGREADBUFFER _IOWR(MPT2_MAGIC_NUMBER, 30, \
     struct mpt2_diag_read_buffer)

 /**
  * struct mpt2_ioctl_header - main header structure
  * @ioc_number -  IOC unit number
  * @port_number - IOC port number
  * @max_data_size - maximum number bytes to transfer on read
  */
 struct mpt2_ioctl_header {
 	uint32_t ioc_number;
 	uint32_t port_number;
 	uint32_t max_data_size;
 };

 /**
  * struct mpt2_ioctl_diag_reset - diagnostic reset
  * @hdr - generic header
  */
 struct mpt2_ioctl_diag_reset {
 	struct mpt2_ioctl_header hdr;
 };


 /**
  * struct mpt2_ioctl_pci_info - pci device info
  * @device - pci device id
  * @function - pci function id
  * @bus - pci bus id
  * @segment_id - pci segment id
  */
 struct mpt2_ioctl_pci_info {
 	union {
 		struct {
 			uint32_t device:5;
 			uint32_t function:3;
 			uint32_t bus:24;
 		} bits;
 		uint32_t  word;
 	} u;
 	uint32_t segment_id;
 };


 #define MPT2_IOCTL_INTERFACE_SCSI	(0x00)
 #define MPT2_IOCTL_INTERFACE_FC		(0x01)
 #define MPT2_IOCTL_INTERFACE_FC_IP	(0x02)
 #define MPT2_IOCTL_INTERFACE_SAS	(0x03)
 #define MPT2_IOCTL_INTERFACE_SAS2	(0x04)
 #define MPT2_IOCTL_VERSION_LENGTH	(32)

 /**
  * struct mpt2_ioctl_iocinfo - generic controller info
  * @hdr - generic header
  * @adapter_type - type of adapter (spi, fc, sas)
  * @port_number - port number
  * @pci_id - PCI Id
  * @hw_rev - hardware revision
  * @sub_system_device - PCI subsystem Device ID
  * @sub_system_vendor - PCI subsystem Vendor ID
  * @rsvd0 - reserved
  * @firmware_version - firmware version
  * @bios_version - BIOS version
  * @driver_version - driver version - 32 ASCII characters
  * @rsvd1 - reserved
  * @scsi_id - scsi id of adapter 0
  * @rsvd2 - reserved
  * @pci_information - pci info (2nd revision)
  */
 struct mpt2_ioctl_iocinfo {
 	struct mpt2_ioctl_header hdr;
 	uint32_t adapter_type;
 	uint32_t port_number;
 	uint32_t pci_id;
 	uint32_t hw_rev;
 	uint32_t subsystem_device;
 	uint32_t subsystem_vendor;
 	uint32_t rsvd0;
 	uint32_t firmware_version;
 	uint32_t bios_version;
 	uint8_t driver_version[MPT2_IOCTL_VERSION_LENGTH];
 	uint8_t rsvd1;
 	uint8_t scsi_id;
 	uint16_t rsvd2;
 	struct mpt2_ioctl_pci_info pci_information;
 };


 /* number of event log entries */
 #define MPT2SAS_CTL_EVENT_LOG_SIZE (50)

 /**
  * struct mpt2_ioctl_eventquery - query event count and type
  * @hdr - generic header
  * @event_entries - number of events returned by get_event_report
  * @rsvd - reserved
  * @event_types - type of events currently being captured
  */
 struct mpt2_ioctl_eventquery {
 	struct mpt2_ioctl_header hdr;
 	uint16_t event_entries;
 	uint16_t rsvd;
 	uint32_t event_types[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];
 };

 /**
  * struct mpt2_ioctl_eventenable - enable/disable event capturing
  * @hdr - generic header
  * @event_types - toggle off/on type of events to be captured
  */
 struct mpt2_ioctl_eventenable {
 	struct mpt2_ioctl_header hdr;
 	uint32_t event_types[4];
 };

 #define MPT2_EVENT_DATA_SIZE (192)
 /**
  * struct MPT2_IOCTL_EVENTS -
  * @event - the event that was reported
  * @context - unique value for each event assigned by driver
  * @data - event data returned in fw reply message
  */
 struct MPT2_IOCTL_EVENTS {
 	uint32_t event;
 	uint32_t context;
 	uint8_t data[MPT2_EVENT_DATA_SIZE];
 };

 /**
  * struct mpt2_ioctl_eventreport - returing event log
  * @hdr - generic header
  * @event_data - (see struct MPT2_IOCTL_EVENTS)
  */
 struct mpt2_ioctl_eventreport {
 	struct mpt2_ioctl_header hdr;
 	struct MPT2_IOCTL_EVENTS event_data[1];
 };

 /**
  * struct mpt2_ioctl_command - generic mpt firmware passthru ioclt
  * @hdr - generic header
  * @timeout - command timeout in seconds. (if zero then use driver default
  *  value).
  * @reply_frame_buf_ptr - reply location
  * @data_in_buf_ptr - destination for read
  * @data_out_buf_ptr - data source for write
  * @sense_data_ptr - sense data location
  * @max_reply_bytes - maximum number of reply bytes to be sent to app.
  * @data_in_size - number bytes for data transfer in (read)
  * @data_out_size - number bytes for data transfer out (write)
  * @max_sense_bytes - maximum number of bytes for auto sense buffers
  * @data_sge_offset - offset in words from the start of the request message to
  * the first SGL
  * @mf[1];
  */
 struct mpt2_ioctl_command {
 	struct mpt2_ioctl_header hdr;
 	uint32_t timeout;
 	void __user *reply_frame_buf_ptr;
 	void __user *data_in_buf_ptr;
 	void __user *data_out_buf_ptr;
 	void __user *sense_data_ptr;
 	uint32_t max_reply_bytes;
 	uint32_t data_in_size;
 	uint32_t data_out_size;
 	uint32_t max_sense_bytes;
 	uint32_t data_sge_offset;
 	uint8_t mf[1];
 };

 #ifdef CONFIG_COMPAT
 struct mpt2_ioctl_command32 {
 	struct mpt2_ioctl_header hdr;
 	uint32_t timeout;
 	uint32_t reply_frame_buf_ptr;
 	uint32_t data_in_buf_ptr;
 	uint32_t data_out_buf_ptr;
 	uint32_t sense_data_ptr;
 	uint32_t max_reply_bytes;
 	uint32_t data_in_size;
 	uint32_t data_out_size;
 	uint32_t max_sense_bytes;
 	uint32_t data_sge_offset;
 	uint8_t mf[1];
 };
 #endif

 /**
  * struct mpt2_ioctl_btdh_mapping - mapping info
  * @hdr - generic header
  * @id - target device identification number
  * @bus - SCSI bus number that the target device exists on
  * @handle - device handle for the target device
  * @rsvd - reserved
  *
  * To obtain a bus/id the application sets
  * handle to valid handle, and bus/id to 0xFFFF.
  *
  * To obtain the device handle the application sets
  * bus/id valid value, and the handle to 0xFFFF.
  */
 struct mpt2_ioctl_btdh_mapping {
 	struct mpt2_ioctl_header hdr;
 	uint32_t id;
 	uint32_t bus;
 	uint16_t handle;
 	uint16_t rsvd;
 };


 /* status bits for ioc->diag_buffer_status */
 #define MPT2_DIAG_BUFFER_IS_REGISTERED	(0x01)
 #define MPT2_DIAG_BUFFER_IS_RELEASED	(0x02)
 #define MPT2_DIAG_BUFFER_IS_DIAG_RESET	(0x04)

 /* application flags for mpt2_diag_register, mpt2_diag_query */
 #define MPT2_APP_FLAGS_APP_OWNED	(0x0001)
 #define MPT2_APP_FLAGS_BUFFER_VALID	(0x0002)
 #define MPT2_APP_FLAGS_FW_BUFFER_ACCESS	(0x0004)

 /* flags for mpt2_diag_read_buffer */
 #define MPT2_FLAGS_REREGISTER		(0x0001)

 #define MPT2_PRODUCT_SPECIFIC_DWORDS 		23

 /**
  * struct mpt2_diag_register - application register with driver
  * @hdr - generic header
  * @reserved -
  * @buffer_type - specifies either TRACE or SNAPSHOT
  * @application_flags - misc flags
  * @diagnostic_flags - specifies flags affecting command processing
  * @product_specific - product specific information
  * @requested_buffer_size - buffers size in bytes
  * @unique_id - tag specified by application that is used to signal ownership
  *  of the buffer.
  *
  * This will allow the driver to setup any required buffers that will be
  * needed by firmware to communicate with the driver.
  */
 struct mpt2_diag_register {
 	struct mpt2_ioctl_header hdr;
 	uint8_t reserved;
 	uint8_t buffer_type;
 	uint16_t application_flags;
 	uint32_t diagnostic_flags;
 	uint32_t product_specific[MPT2_PRODUCT_SPECIFIC_DWORDS];
 	uint32_t requested_buffer_size;
 	uint32_t unique_id;
 };

 /**
  * struct mpt2_diag_unregister - application unregister with driver
  * @hdr - generic header
  * @unique_id - tag uniquely identifies the buffer to be unregistered
  *
  * This will allow the driver to cleanup any memory allocated for diag
  * messages and to free up any resources.
  */
 struct mpt2_diag_unregister {
 	struct mpt2_ioctl_header hdr;
 	uint32_t unique_id;
 };

 /**
  * struct mpt2_diag_query - query relevant info associated with diag buffers
  * @hdr - generic header
  * @reserved -
  * @buffer_type - specifies either TRACE or SNAPSHOT
  * @application_flags - misc flags
  * @diagnostic_flags - specifies flags affecting command processing
  * @product_specific - product specific information
  * @total_buffer_size - diag buffer size in bytes
  * @driver_added_buffer_size - size of extra space appended to end of buffer
  * @unique_id - unique id associated with this buffer.
  *
  * The application will send only buffer_type and unique_id.  Driver will
  * inspect unique_id first, if valid, fill in all the info.  If unique_id is
  * 0x00, the driver will return info specified by Buffer Type.
  */
 struct mpt2_diag_query {
 	struct mpt2_ioctl_header hdr;
 	uint8_t reserved;
 	uint8_t buffer_type;
 	uint16_t application_flags;
 	uint32_t diagnostic_flags;
 	uint32_t product_specific[MPT2_PRODUCT_SPECIFIC_DWORDS];
 	uint32_t total_buffer_size;
 	uint32_t driver_added_buffer_size;
 	uint32_t unique_id;
 };

 /**
  * struct mpt2_diag_release -  request to send Diag Release Message to firmware
  * @hdr - generic header
  * @unique_id - tag uniquely identifies the buffer to be released
  *
  * This allows ownership of the specified buffer to returned to the driver,
  * allowing an application to read the buffer without fear that firmware is
  * overwritting information in the buffer.
  */
 struct mpt2_diag_release {
 	struct mpt2_ioctl_header hdr;
 	uint32_t unique_id;
 };

 /**
  * struct mpt2_diag_read_buffer - request for copy of the diag buffer
  * @hdr - generic header
  * @status -
  * @reserved -
  * @flags - misc flags
  * @starting_offset - starting offset within drivers buffer where to start
  *  reading data at into the specified application buffer
  * @bytes_to_read - number of bytes to copy from the drivers buffer into the
  *  application buffer starting at starting_offset.
  * @unique_id - unique id associated with this buffer.
  * @diagnostic_data - data payload
  */
 struct mpt2_diag_read_buffer {
 	struct mpt2_ioctl_header hdr;
 	uint8_t status;
 	uint8_t reserved;
 	uint16_t flags;
 	uint32_t starting_offset;
 	uint32_t bytes_to_read;
 	uint32_t unique_id;
 	uint32_t diagnostic_data[1];
 };

 #endif /* MPT2SAS_CTL_H_INCLUDED */
	/*
	* Management Module Support for MPT (Message Passing Technology) based
	* controllers
	*
	* This code is based on drivers/scsi/mpt2sas/mpt2_ctl.h
	* Copyright (C) 2007-2009 LSI Corporation
	* (mailto:DL-MPTFusionLinux@lsi.com)
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License
	* as published by the Free Software Foundation; either version 2
	* of the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* NO WARRANTY
	* THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
	* CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
	* LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
	* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
	* solely responsible for determining the appropriateness of using and
	* distributing the Program and assumes all risks associated with its
	* exercise of rights under this Agreement, including but not limited to
	* the risks and costs of program errors, damage to or loss of data,
	* programs or equipment, and unavailability or interruption of operations.

	* DISCLAIMER OF LIABILITY
	* NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
	* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
	* DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
	* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
	* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
	* USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
	* HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES

	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
	* USA.
	*/

	#ifndef MPT2SAS_CTL_H_INCLUDED
	#define MPT2SAS_CTL_H_INCLUDED

	#ifdef __KERNEL__
	#include <linux/miscdevice.h>
	#endif

	#define MPT2SAS_DEV_NAME "mpt2ctl"
	#define MPT2_MAGIC_NUMBER 'L'
	#define MPT2_IOCTL_DEFAULT_TIMEOUT (10) /* in seconds */

	/**
	* IOCTL opcodes
	*/
	#define MPT2IOCINFO _IOWR(MPT2_MAGIC_NUMBER, 17, \
	struct mpt2_ioctl_iocinfo)
	#define MPT2COMMAND _IOWR(MPT2_MAGIC_NUMBER, 20, \
	struct mpt2_ioctl_command)
	#ifdef CONFIG_COMPAT
	#define MPT2COMMAND32 _IOWR(MPT2_MAGIC_NUMBER, 20, \
	struct mpt2_ioctl_command32)
	#endif
	#define MPT2EVENTQUERY _IOWR(MPT2_MAGIC_NUMBER, 21, \
	struct mpt2_ioctl_eventquery)
	#define MPT2EVENTENABLE _IOWR(MPT2_MAGIC_NUMBER, 22, \
	struct mpt2_ioctl_eventenable)
	#define MPT2EVENTREPORT _IOWR(MPT2_MAGIC_NUMBER, 23, \
	struct mpt2_ioctl_eventreport)
	#define MPT2HARDRESET _IOWR(MPT2_MAGIC_NUMBER, 24, \
	struct mpt2_ioctl_diag_reset)
	#define MPT2BTDHMAPPING _IOWR(MPT2_MAGIC_NUMBER, 31, \
	struct mpt2_ioctl_btdh_mapping)

	/* diag buffer support */
	#define MPT2DIAGREGISTER _IOWR(MPT2_MAGIC_NUMBER, 26, \
	struct mpt2_diag_register)
	#define MPT2DIAGRELEASE _IOWR(MPT2_MAGIC_NUMBER, 27, \
	struct mpt2_diag_release)
	#define MPT2DIAGUNREGISTER _IOWR(MPT2_MAGIC_NUMBER, 28, \
	struct mpt2_diag_unregister)
	#define MPT2DIAGQUERY _IOWR(MPT2_MAGIC_NUMBER, 29, \
	struct mpt2_diag_query)
	#define MPT2DIAGREADBUFFER _IOWR(MPT2_MAGIC_NUMBER, 30, \
	struct mpt2_diag_read_buffer)

	/**
	* struct mpt2_ioctl_header - main header structure
	* @ioc_number - IOC unit number
	* @port_number - IOC port number
	* @max_data_size - maximum number bytes to transfer on read
	*/
	struct mpt2_ioctl_header {
	uint32_t ioc_number;
	uint32_t port_number;
	uint32_t max_data_size;
	};

	/**
	* struct mpt2_ioctl_diag_reset - diagnostic reset
	* @hdr - generic header
	*/
	struct mpt2_ioctl_diag_reset {
	struct mpt2_ioctl_header hdr;
	};


	/**
	* struct mpt2_ioctl_pci_info - pci device info
	* @device - pci device id
	* @function - pci function id
	* @bus - pci bus id
	* @segment_id - pci segment id
	*/
	struct mpt2_ioctl_pci_info {
	union {
	struct {
	uint32_t device:5;
	uint32_t function:3;
	uint32_t bus:24;
	} bits;
	uint32_t word;
	} u;
	uint32_t segment_id;
	};


	#define MPT2_IOCTL_INTERFACE_SCSI (0x00)
	#define MPT2_IOCTL_INTERFACE_FC (0x01)
	#define MPT2_IOCTL_INTERFACE_FC_IP (0x02)
	#define MPT2_IOCTL_INTERFACE_SAS (0x03)
	#define MPT2_IOCTL_INTERFACE_SAS2 (0x04)
	#define MPT2_IOCTL_VERSION_LENGTH (32)

	/**
	* struct mpt2_ioctl_iocinfo - generic controller info
	* @hdr - generic header
	* @adapter_type - type of adapter (spi, fc, sas)
	* @port_number - port number
	* @pci_id - PCI Id
	* @hw_rev - hardware revision
	* @sub_system_device - PCI subsystem Device ID
	* @sub_system_vendor - PCI subsystem Vendor ID
	* @rsvd0 - reserved
	* @firmware_version - firmware version
	* @bios_version - BIOS version
	* @driver_version - driver version - 32 ASCII characters
	* @rsvd1 - reserved
	* @scsi_id - scsi id of adapter 0
	* @rsvd2 - reserved
	* @pci_information - pci info (2nd revision)
	*/
	struct mpt2_ioctl_iocinfo {
	struct mpt2_ioctl_header hdr;
	uint32_t adapter_type;
	uint32_t port_number;
	uint32_t pci_id;
	uint32_t hw_rev;
	uint32_t subsystem_device;
	uint32_t subsystem_vendor;
	uint32_t rsvd0;
	uint32_t firmware_version;
	uint32_t bios_version;
	uint8_t driver_version[MPT2_IOCTL_VERSION_LENGTH];
	uint8_t rsvd1;
	uint8_t scsi_id;
	uint16_t rsvd2;
	struct mpt2_ioctl_pci_info pci_information;
	};


	/* number of event log entries */
	#define MPT2SAS_CTL_EVENT_LOG_SIZE (50)

	/**
	* struct mpt2_ioctl_eventquery - query event count and type
	* @hdr - generic header
	* @event_entries - number of events returned by get_event_report
	* @rsvd - reserved
	* @event_types - type of events currently being captured
	*/
	struct mpt2_ioctl_eventquery {
	struct mpt2_ioctl_header hdr;
	uint16_t event_entries;
	uint16_t rsvd;
	uint32_t event_types[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];
	};

	/**
	* struct mpt2_ioctl_eventenable - enable/disable event capturing
	* @hdr - generic header
	* @event_types - toggle off/on type of events to be captured
	*/
	struct mpt2_ioctl_eventenable {
	struct mpt2_ioctl_header hdr;
	uint32_t event_types[4];
	};

	#define MPT2_EVENT_DATA_SIZE (192)
	/**
	* struct MPT2_IOCTL_EVENTS -
	* @event - the event that was reported
	* @context - unique value for each event assigned by driver
	* @data - event data returned in fw reply message
	*/
	struct MPT2_IOCTL_EVENTS {
	uint32_t event;
	uint32_t context;
	uint8_t data[MPT2_EVENT_DATA_SIZE];
	};

	/**
	* struct mpt2_ioctl_eventreport - returing event log
	* @hdr - generic header
	* @event_data - (see struct MPT2_IOCTL_EVENTS)
	*/
	struct mpt2_ioctl_eventreport {
	struct mpt2_ioctl_header hdr;
	struct MPT2_IOCTL_EVENTS event_data[1];
	};

	/**
	* struct mpt2_ioctl_command - generic mpt firmware passthru ioclt
	* @hdr - generic header
	* @timeout - command timeout in seconds. (if zero then use driver default
	* value).
	* @reply_frame_buf_ptr - reply location
	* @data_in_buf_ptr - destination for read
	* @data_out_buf_ptr - data source for write
	* @sense_data_ptr - sense data location
	* @max_reply_bytes - maximum number of reply bytes to be sent to app.
	* @data_in_size - number bytes for data transfer in (read)
	* @data_out_size - number bytes for data transfer out (write)
	* @max_sense_bytes - maximum number of bytes for auto sense buffers
	* @data_sge_offset - offset in words from the start of the request message to
	* the first SGL
	* @mf[1];
	*/
	struct mpt2_ioctl_command {
	struct mpt2_ioctl_header hdr;
	uint32_t timeout;
	void __user *reply_frame_buf_ptr;
	void __user *data_in_buf_ptr;
	void __user *data_out_buf_ptr;
	void __user *sense_data_ptr;
	uint32_t max_reply_bytes;
	uint32_t data_in_size;
	uint32_t data_out_size;
	uint32_t max_sense_bytes;
	uint32_t data_sge_offset;
	uint8_t mf[1];
	};

	#ifdef CONFIG_COMPAT
	struct mpt2_ioctl_command32 {
	struct mpt2_ioctl_header hdr;
	uint32_t timeout;
	uint32_t reply_frame_buf_ptr;
	uint32_t data_in_buf_ptr;
	uint32_t data_out_buf_ptr;
	uint32_t sense_data_ptr;
	uint32_t max_reply_bytes;
	uint32_t data_in_size;
	uint32_t data_out_size;
	uint32_t max_sense_bytes;
	uint32_t data_sge_offset;
	uint8_t mf[1];
	};
	#endif

	/**
	* struct mpt2_ioctl_btdh_mapping - mapping info
	* @hdr - generic header
	* @id - target device identification number
	* @bus - SCSI bus number that the target device exists on
	* @handle - device handle for the target device
	* @rsvd - reserved
	*
	* To obtain a bus/id the application sets
	* handle to valid handle, and bus/id to 0xFFFF.
	*
	* To obtain the device handle the application sets
	* bus/id valid value, and the handle to 0xFFFF.
	*/
	struct mpt2_ioctl_btdh_mapping {
	struct mpt2_ioctl_header hdr;
	uint32_t id;
	uint32_t bus;
	uint16_t handle;
	uint16_t rsvd;
	};


	/* status bits for ioc->diag_buffer_status */
	#define MPT2_DIAG_BUFFER_IS_REGISTERED (0x01)
	#define MPT2_DIAG_BUFFER_IS_RELEASED (0x02)
	#define MPT2_DIAG_BUFFER_IS_DIAG_RESET (0x04)

	/* application flags for mpt2_diag_register, mpt2_diag_query */
	#define MPT2_APP_FLAGS_APP_OWNED (0x0001)
	#define MPT2_APP_FLAGS_BUFFER_VALID (0x0002)
	#define MPT2_APP_FLAGS_FW_BUFFER_ACCESS (0x0004)

	/* flags for mpt2_diag_read_buffer */
	#define MPT2_FLAGS_REREGISTER (0x0001)

	#define MPT2_PRODUCT_SPECIFIC_DWORDS 23

	/**
	* struct mpt2_diag_register - application register with driver
	* @hdr - generic header
	* @reserved -
	* @buffer_type - specifies either TRACE or SNAPSHOT
	* @application_flags - misc flags
	* @diagnostic_flags - specifies flags affecting command processing
	* @product_specific - product specific information
	* @requested_buffer_size - buffers size in bytes
	* @unique_id - tag specified by application that is used to signal ownership
	* of the buffer.
	*
	* This will allow the driver to setup any required buffers that will be
	* needed by firmware to communicate with the driver.
	*/
	struct mpt2_diag_register {
	struct mpt2_ioctl_header hdr;
	uint8_t reserved;
	uint8_t buffer_type;
	uint16_t application_flags;
	uint32_t diagnostic_flags;
	uint32_t product_specific[MPT2_PRODUCT_SPECIFIC_DWORDS];
	uint32_t requested_buffer_size;
	uint32_t unique_id;
	};

	/**
	* struct mpt2_diag_unregister - application unregister with driver
	* @hdr - generic header
	* @unique_id - tag uniquely identifies the buffer to be unregistered
	*
	* This will allow the driver to cleanup any memory allocated for diag
	* messages and to free up any resources.
	*/
	struct mpt2_diag_unregister {
	struct mpt2_ioctl_header hdr;
	uint32_t unique_id;
	};

	/**
	* struct mpt2_diag_query - query relevant info associated with diag buffers
	* @hdr - generic header
	* @reserved -
	* @buffer_type - specifies either TRACE or SNAPSHOT
	* @application_flags - misc flags
	* @diagnostic_flags - specifies flags affecting command processing
	* @product_specific - product specific information
	* @total_buffer_size - diag buffer size in bytes
	* @driver_added_buffer_size - size of extra space appended to end of buffer
	* @unique_id - unique id associated with this buffer.
	*
	* The application will send only buffer_type and unique_id. Driver will
	* inspect unique_id first, if valid, fill in all the info. If unique_id is
	* 0x00, the driver will return info specified by Buffer Type.
	*/
	struct mpt2_diag_query {
	struct mpt2_ioctl_header hdr;
	uint8_t reserved;
	uint8_t buffer_type;
	uint16_t application_flags;
	uint32_t diagnostic_flags;
	uint32_t product_specific[MPT2_PRODUCT_SPECIFIC_DWORDS];
	uint32_t total_buffer_size;
	uint32_t driver_added_buffer_size;
	uint32_t unique_id;
	};

	/**
	* struct mpt2_diag_release - request to send Diag Release Message to firmware
	* @hdr - generic header
	* @unique_id - tag uniquely identifies the buffer to be released
	*
	* This allows ownership of the specified buffer to returned to the driver,
	* allowing an application to read the buffer without fear that firmware is
	* overwritting information in the buffer.
	*/
	struct mpt2_diag_release {
	struct mpt2_ioctl_header hdr;
	uint32_t unique_id;
	};

	/**
	* struct mpt2_diag_read_buffer - request for copy of the diag buffer
	* @hdr - generic header
	* @status -
	* @reserved -
	* @flags - misc flags
	* @starting_offset - starting offset within drivers buffer where to start
	* reading data at into the specified application buffer
	* @bytes_to_read - number of bytes to copy from the drivers buffer into the
	* application buffer starting at starting_offset.
	* @unique_id - unique id associated with this buffer.
	* @diagnostic_data - data payload
	*/
	struct mpt2_diag_read_buffer {
	struct mpt2_ioctl_header hdr;
	uint8_t status;
	uint8_t reserved;
	uint16_t flags;
	uint32_t starting_offset;
	uint32_t bytes_to_read;
	uint32_t unique_id;
	uint32_t diagnostic_data[1];
	};

	#endif /* MPT2SAS_CTL_H_INCLUDED */