V4L/DVB (3316): Add initial support for KWorld HardwareMpegTV XPert
- Add initial support for KWorld HardwareMpegTV XPert.
- uses silicon tuner: tda8290 + tda8275
- standard video using cx88 broadcast decoder is working.
- blackbird mpeg encoder support (cx23416) not yet working.
- FM radio untested.
- audio is only working correctly in television mode,
all other modes disabled.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index 1bc9992..f2ae047 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -1048,6 +1048,25 @@
}},
.dvb = 1,
},
+ [CX88_BOARD_KWORLD_HARDWARE_MPEG_TV_XPERT] = {
+ /* FIXME: This card is shipped without a windows tv app,
+ * so I haven't been able to use regspy to figure out the GPIO
+ * settings. Standard video using the cx88 broadcast decoder is
+ * working, but blackbird isn't working yet, audio is only
+ * working correctly for television mode. S-Video and Composite
+ * are working for video-only, so I have them disabled for now.
+ */
+ .name = "KWorld HardwareMpegTV XPert",
+ .tuner_type = TUNER_PHILIPS_TDA8290,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .input = {{
+ .type = CX88_VMUX_TELEVISION,
+ .vmux = 0,
+ .gpio0 = 0x07fa,
+ }},
+ },
};
const unsigned int cx88_bcount = ARRAY_SIZE(cx88_boards);
@@ -1254,6 +1273,10 @@
.subdevice = 0xdb11,
.card = CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS,
/* Re-branded DViCO: UltraView DVB-T Plus */
+ },{
+ .subvendor = 0x17de,
+ .subdevice = 0x0840,
+ .card = CX88_BOARD_KWORLD_HARDWARE_MPEG_TV_XPERT,
},
};
const unsigned int cx88_idcount = ARRAY_SIZE(cx88_subids);