| /* |
| * linux/arch/arm/mach-omap2/irq.c |
| * |
| * Interrupt handler for OMAP2 boards. |
| * |
| * Copyright (C) 2005 Nokia Corporation |
| * Author: Paul Mundt <paul.mundt@nokia.com> |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <mach/hardware.h> |
| #include <asm/mach/irq.h> |
| |
| |
| /* selected INTC register offsets */ |
| |
| #define INTC_REVISION 0x0000 |
| #define INTC_SYSCONFIG 0x0010 |
| #define INTC_SYSSTATUS 0x0014 |
| #define INTC_SIR 0x0040 |
| #define INTC_CONTROL 0x0048 |
| #define INTC_PROTECTION 0x004C |
| #define INTC_IDLE 0x0050 |
| #define INTC_THRESHOLD 0x0068 |
| #define INTC_MIR0 0x0084 |
| #define INTC_MIR_CLEAR0 0x0088 |
| #define INTC_MIR_SET0 0x008c |
| #define INTC_PENDING_IRQ0 0x0098 |
| /* Number of IRQ state bits in each MIR register */ |
| #define IRQ_BITS_PER_REG 32 |
| |
| /* |
| * OMAP2 has a number of different interrupt controllers, each interrupt |
| * controller is identified as its own "bank". Register definitions are |
| * fairly consistent for each bank, but not all registers are implemented |
| * for each bank.. when in doubt, consult the TRM. |
| */ |
| static struct omap_irq_bank { |
| void __iomem *base_reg; |
| unsigned int nr_irqs; |
| } __attribute__ ((aligned(4))) irq_banks[] = { |
| { |
| /* MPU INTC */ |
| .nr_irqs = 96, |
| }, |
| }; |
| |
| /* Structure to save interrupt controller context */ |
| struct omap3_intc_regs { |
| u32 sysconfig; |
| u32 protection; |
| u32 idle; |
| u32 threshold; |
| u32 ilr[INTCPS_NR_IRQS]; |
| u32 mir[INTCPS_NR_MIR_REGS]; |
| }; |
| |
| static struct omap3_intc_regs intc_context[ARRAY_SIZE(irq_banks)]; |
| |
| /* INTC bank register get/set */ |
| |
| static void intc_bank_write_reg(u32 val, struct omap_irq_bank *bank, u16 reg) |
| { |
| __raw_writel(val, bank->base_reg + reg); |
| } |
| |
| static u32 intc_bank_read_reg(struct omap_irq_bank *bank, u16 reg) |
| { |
| return __raw_readl(bank->base_reg + reg); |
| } |
| |
| static int previous_irq; |
| |
| /* |
| * On 34xx we can get occasional spurious interrupts if the ack from |
| * an interrupt handler does not get posted before we unmask. Warn about |
| * the interrupt handlers that need to flush posted writes. |
| */ |
| static int omap_check_spurious(unsigned int irq) |
| { |
| u32 sir, spurious; |
| |
| sir = intc_bank_read_reg(&irq_banks[0], INTC_SIR); |
| spurious = sir >> 7; |
| |
| if (spurious) { |
| printk(KERN_WARNING "Spurious irq %i: 0x%08x, please flush " |
| "posted write for irq %i\n", |
| irq, sir, previous_irq); |
| return spurious; |
| } |
| |
| return 0; |
| } |
| |
| /* XXX: FIQ and additional INTC support (only MPU at the moment) */ |
| static void omap_ack_irq(unsigned int irq) |
| { |
| intc_bank_write_reg(0x1, &irq_banks[0], INTC_CONTROL); |
| } |
| |
| static void omap_mask_irq(unsigned int irq) |
| { |
| int offset = irq & (~(IRQ_BITS_PER_REG - 1)); |
| |
| if (cpu_is_omap34xx()) { |
| int spurious = 0; |
| |
| /* |
| * INT_34XX_GPT12_IRQ is also the spurious irq. Maybe because |
| * it is the highest irq number? |
| */ |
| if (irq == INT_34XX_GPT12_IRQ) |
| spurious = omap_check_spurious(irq); |
| |
| if (!spurious) |
| previous_irq = irq; |
| } |
| |
| irq &= (IRQ_BITS_PER_REG - 1); |
| |
| intc_bank_write_reg(1 << irq, &irq_banks[0], INTC_MIR_SET0 + offset); |
| } |
| |
| static void omap_unmask_irq(unsigned int irq) |
| { |
| int offset = irq & (~(IRQ_BITS_PER_REG - 1)); |
| |
| irq &= (IRQ_BITS_PER_REG - 1); |
| |
| intc_bank_write_reg(1 << irq, &irq_banks[0], INTC_MIR_CLEAR0 + offset); |
| } |
| |
| static void omap_mask_ack_irq(unsigned int irq) |
| { |
| omap_mask_irq(irq); |
| omap_ack_irq(irq); |
| } |
| |
| static struct irq_chip omap_irq_chip = { |
| .name = "INTC", |
| .ack = omap_mask_ack_irq, |
| .mask = omap_mask_irq, |
| .unmask = omap_unmask_irq, |
| }; |
| |
| static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank) |
| { |
| unsigned long tmp; |
| |
| tmp = intc_bank_read_reg(bank, INTC_REVISION) & 0xff; |
| printk(KERN_INFO "IRQ: Found an INTC at 0x%p " |
| "(revision %ld.%ld) with %d interrupts\n", |
| bank->base_reg, tmp >> 4, tmp & 0xf, bank->nr_irqs); |
| |
| tmp = intc_bank_read_reg(bank, INTC_SYSCONFIG); |
| tmp |= 1 << 1; /* soft reset */ |
| intc_bank_write_reg(tmp, bank, INTC_SYSCONFIG); |
| |
| while (!(intc_bank_read_reg(bank, INTC_SYSSTATUS) & 0x1)) |
| /* Wait for reset to complete */; |
| |
| /* Enable autoidle */ |
| intc_bank_write_reg(1 << 0, bank, INTC_SYSCONFIG); |
| } |
| |
| int omap_irq_pending(void) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(irq_banks); i++) { |
| struct omap_irq_bank *bank = irq_banks + i; |
| int irq; |
| |
| for (irq = 0; irq < bank->nr_irqs; irq += 32) |
| if (intc_bank_read_reg(bank, INTC_PENDING_IRQ0 + |
| ((irq >> 5) << 5))) |
| return 1; |
| } |
| return 0; |
| } |
| |
| void __init omap_init_irq(void) |
| { |
| unsigned long nr_of_irqs = 0; |
| unsigned int nr_banks = 0; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(irq_banks); i++) { |
| unsigned long base = 0; |
| struct omap_irq_bank *bank = irq_banks + i; |
| |
| if (cpu_is_omap24xx()) |
| base = OMAP24XX_IC_BASE; |
| else if (cpu_is_omap34xx()) |
| base = OMAP34XX_IC_BASE; |
| |
| BUG_ON(!base); |
| |
| /* Static mapping, never released */ |
| bank->base_reg = ioremap(base, SZ_4K); |
| if (!bank->base_reg) { |
| printk(KERN_ERR "Could not ioremap irq bank%i\n", i); |
| continue; |
| } |
| |
| omap_irq_bank_init_one(bank); |
| |
| nr_of_irqs += bank->nr_irqs; |
| nr_banks++; |
| } |
| |
| printk(KERN_INFO "Total of %ld interrupts on %d active controller%s\n", |
| nr_of_irqs, nr_banks, nr_banks > 1 ? "s" : ""); |
| |
| for (i = 0; i < nr_of_irqs; i++) { |
| set_irq_chip(i, &omap_irq_chip); |
| set_irq_handler(i, handle_level_irq); |
| set_irq_flags(i, IRQF_VALID); |
| } |
| } |
| |
| #ifdef CONFIG_ARCH_OMAP3 |
| void omap_intc_save_context(void) |
| { |
| int ind = 0, i = 0; |
| for (ind = 0; ind < ARRAY_SIZE(irq_banks); ind++) { |
| struct omap_irq_bank *bank = irq_banks + ind; |
| intc_context[ind].sysconfig = |
| intc_bank_read_reg(bank, INTC_SYSCONFIG); |
| intc_context[ind].protection = |
| intc_bank_read_reg(bank, INTC_PROTECTION); |
| intc_context[ind].idle = |
| intc_bank_read_reg(bank, INTC_IDLE); |
| intc_context[ind].threshold = |
| intc_bank_read_reg(bank, INTC_THRESHOLD); |
| for (i = 0; i < INTCPS_NR_IRQS; i++) |
| intc_context[ind].ilr[i] = |
| intc_bank_read_reg(bank, (0x100 + 0x4*i)); |
| for (i = 0; i < INTCPS_NR_MIR_REGS; i++) |
| intc_context[ind].mir[i] = |
| intc_bank_read_reg(&irq_banks[0], INTC_MIR0 + |
| (0x20 * i)); |
| } |
| } |
| |
| void omap_intc_restore_context(void) |
| { |
| int ind = 0, i = 0; |
| |
| for (ind = 0; ind < ARRAY_SIZE(irq_banks); ind++) { |
| struct omap_irq_bank *bank = irq_banks + ind; |
| intc_bank_write_reg(intc_context[ind].sysconfig, |
| bank, INTC_SYSCONFIG); |
| intc_bank_write_reg(intc_context[ind].sysconfig, |
| bank, INTC_SYSCONFIG); |
| intc_bank_write_reg(intc_context[ind].protection, |
| bank, INTC_PROTECTION); |
| intc_bank_write_reg(intc_context[ind].idle, |
| bank, INTC_IDLE); |
| intc_bank_write_reg(intc_context[ind].threshold, |
| bank, INTC_THRESHOLD); |
| for (i = 0; i < INTCPS_NR_IRQS; i++) |
| intc_bank_write_reg(intc_context[ind].ilr[i], |
| bank, (0x100 + 0x4*i)); |
| for (i = 0; i < INTCPS_NR_MIR_REGS; i++) |
| intc_bank_write_reg(intc_context[ind].mir[i], |
| &irq_banks[0], INTC_MIR0 + (0x20 * i)); |
| } |
| /* MIRs are saved and restore with other PRCM registers */ |
| } |
| |
| void omap3_intc_suspend(void) |
| { |
| /* A pending interrupt would prevent OMAP from entering suspend */ |
| omap_ack_irq(0); |
| } |
| |
| void omap3_intc_prepare_idle(void) |
| { |
| /* |
| * Disable autoidle as it can stall interrupt controller, |
| * cf. errata ID i540 for 3430 (all revisions up to 3.1.x) |
| */ |
| intc_bank_write_reg(0, &irq_banks[0], INTC_SYSCONFIG); |
| } |
| |
| void omap3_intc_resume_idle(void) |
| { |
| /* Re-enable autoidle */ |
| intc_bank_write_reg(1, &irq_banks[0], INTC_SYSCONFIG); |
| } |
| #endif /* CONFIG_ARCH_OMAP3 */ |