| /* |
| * ALSA driver for ICEnsemble VT1724 (Envy24HT) |
| * |
| * Lowlevel functions for Infrasonic Quartet |
| * |
| * Copyright (c) 2009 Pavel Hofman <pavel.hofman@ivitera.com> |
| * |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/interrupt.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <sound/core.h> |
| #include <sound/tlv.h> |
| #include <sound/info.h> |
| |
| #include "ice1712.h" |
| #include "envy24ht.h" |
| #include <sound/ak4113.h> |
| #include "quartet.h" |
| |
| struct qtet_spec { |
| struct ak4113 *ak4113; |
| unsigned int scr; /* system control register */ |
| unsigned int mcr; /* monitoring control register */ |
| unsigned int cpld; /* cpld register */ |
| }; |
| |
| struct qtet_kcontrol_private { |
| unsigned int bit; |
| void (*set_register)(struct snd_ice1712 *ice, unsigned int val); |
| unsigned int (*get_register)(struct snd_ice1712 *ice); |
| const char * const texts[2]; |
| }; |
| |
| enum { |
| IN12_SEL = 0, |
| IN34_SEL, |
| AIN34_SEL, |
| COAX_OUT, |
| IN12_MON12, |
| IN12_MON34, |
| IN34_MON12, |
| IN34_MON34, |
| OUT12_MON34, |
| OUT34_MON12, |
| }; |
| |
| static const char * const ext_clock_names[3] = {"IEC958 In", "Word Clock 1xFS", |
| "Word Clock 256xFS"}; |
| |
| /* chip address on I2C bus */ |
| #define AK4113_ADDR 0x26 /* S/PDIF receiver */ |
| |
| /* chip address on SPI bus */ |
| #define AK4620_ADDR 0x02 /* ADC/DAC */ |
| |
| |
| /* |
| * GPIO pins |
| */ |
| |
| /* GPIO0 - O - DATA0, def. 0 */ |
| #define GPIO_D0 (1<<0) |
| /* GPIO1 - I/O - DATA1, Jack Detect Input0 (0:present, 1:missing), def. 1 */ |
| #define GPIO_D1_JACKDTC0 (1<<1) |
| /* GPIO2 - I/O - DATA2, Jack Detect Input1 (0:present, 1:missing), def. 1 */ |
| #define GPIO_D2_JACKDTC1 (1<<2) |
| /* GPIO3 - I/O - DATA3, def. 1 */ |
| #define GPIO_D3 (1<<3) |
| /* GPIO4 - I/O - DATA4, SPI CDTO, def. 1 */ |
| #define GPIO_D4_SPI_CDTO (1<<4) |
| /* GPIO5 - I/O - DATA5, SPI CCLK, def. 1 */ |
| #define GPIO_D5_SPI_CCLK (1<<5) |
| /* GPIO6 - I/O - DATA6, Cable Detect Input (0:detected, 1:not detected */ |
| #define GPIO_D6_CD (1<<6) |
| /* GPIO7 - I/O - DATA7, Device Detect Input (0:detected, 1:not detected */ |
| #define GPIO_D7_DD (1<<7) |
| /* GPIO8 - O - CPLD Chip Select, def. 1 */ |
| #define GPIO_CPLD_CSN (1<<8) |
| /* GPIO9 - O - CPLD register read/write (0:write, 1:read), def. 0 */ |
| #define GPIO_CPLD_RW (1<<9) |
| /* GPIO10 - O - SPI Chip Select for CODEC#0, def. 1 */ |
| #define GPIO_SPI_CSN0 (1<<10) |
| /* GPIO11 - O - SPI Chip Select for CODEC#1, def. 1 */ |
| #define GPIO_SPI_CSN1 (1<<11) |
| /* GPIO12 - O - Ex. Register Output Enable (0:enable, 1:disable), def. 1, |
| * init 0 */ |
| #define GPIO_EX_GPIOE (1<<12) |
| /* GPIO13 - O - Ex. Register0 Chip Select for System Control Register, |
| * def. 1 */ |
| #define GPIO_SCR (1<<13) |
| /* GPIO14 - O - Ex. Register1 Chip Select for Monitor Control Register, |
| * def. 1 */ |
| #define GPIO_MCR (1<<14) |
| |
| #define GPIO_SPI_ALL (GPIO_D4_SPI_CDTO | GPIO_D5_SPI_CCLK |\ |
| GPIO_SPI_CSN0 | GPIO_SPI_CSN1) |
| |
| #define GPIO_DATA_MASK (GPIO_D0 | GPIO_D1_JACKDTC0 | \ |
| GPIO_D2_JACKDTC1 | GPIO_D3 | \ |
| GPIO_D4_SPI_CDTO | GPIO_D5_SPI_CCLK | \ |
| GPIO_D6_CD | GPIO_D7_DD) |
| |
| /* System Control Register GPIO_SCR data bits */ |
| /* Mic/Line select relay (0:line, 1:mic) */ |
| #define SCR_RELAY GPIO_D0 |
| /* Phantom power drive control (0:5V, 1:48V) */ |
| #define SCR_PHP_V GPIO_D1_JACKDTC0 |
| /* H/W mute control (0:Normal, 1:Mute) */ |
| #define SCR_MUTE GPIO_D2_JACKDTC1 |
| /* Phantom power control (0:Phantom on, 1:off) */ |
| #define SCR_PHP GPIO_D3 |
| /* Analog input 1/2 Source Select */ |
| #define SCR_AIN12_SEL0 GPIO_D4_SPI_CDTO |
| #define SCR_AIN12_SEL1 GPIO_D5_SPI_CCLK |
| /* Analog input 3/4 Source Select (0:line, 1:hi-z) */ |
| #define SCR_AIN34_SEL GPIO_D6_CD |
| /* Codec Power Down (0:power down, 1:normal) */ |
| #define SCR_CODEC_PDN GPIO_D7_DD |
| |
| #define SCR_AIN12_LINE (0) |
| #define SCR_AIN12_MIC (SCR_AIN12_SEL0) |
| #define SCR_AIN12_LOWCUT (SCR_AIN12_SEL1 | SCR_AIN12_SEL0) |
| |
| /* Monitor Control Register GPIO_MCR data bits */ |
| /* Input 1/2 to Monitor 1/2 (0:off, 1:on) */ |
| #define MCR_IN12_MON12 GPIO_D0 |
| /* Input 1/2 to Monitor 3/4 (0:off, 1:on) */ |
| #define MCR_IN12_MON34 GPIO_D1_JACKDTC0 |
| /* Input 3/4 to Monitor 1/2 (0:off, 1:on) */ |
| #define MCR_IN34_MON12 GPIO_D2_JACKDTC1 |
| /* Input 3/4 to Monitor 3/4 (0:off, 1:on) */ |
| #define MCR_IN34_MON34 GPIO_D3 |
| /* Output to Monitor 1/2 (0:off, 1:on) */ |
| #define MCR_OUT34_MON12 GPIO_D4_SPI_CDTO |
| /* Output to Monitor 3/4 (0:off, 1:on) */ |
| #define MCR_OUT12_MON34 GPIO_D5_SPI_CCLK |
| |
| /* CPLD Register DATA bits */ |
| /* Clock Rate Select */ |
| #define CPLD_CKS0 GPIO_D0 |
| #define CPLD_CKS1 GPIO_D1_JACKDTC0 |
| #define CPLD_CKS2 GPIO_D2_JACKDTC1 |
| /* Sync Source Select (0:Internal, 1:External) */ |
| #define CPLD_SYNC_SEL GPIO_D3 |
| /* Word Clock FS Select (0:FS, 1:256FS) */ |
| #define CPLD_WORD_SEL GPIO_D4_SPI_CDTO |
| /* Coaxial Output Source (IS-Link) (0:SPDIF, 1:I2S) */ |
| #define CPLD_COAX_OUT GPIO_D5_SPI_CCLK |
| /* Input 1/2 Source Select (0:Analog12, 1:An34) */ |
| #define CPLD_IN12_SEL GPIO_D6_CD |
| /* Input 3/4 Source Select (0:Analog34, 1:Digital In) */ |
| #define CPLD_IN34_SEL GPIO_D7_DD |
| |
| /* internal clock (CPLD_SYNC_SEL = 0) options */ |
| #define CPLD_CKS_44100HZ (0) |
| #define CPLD_CKS_48000HZ (CPLD_CKS0) |
| #define CPLD_CKS_88200HZ (CPLD_CKS1) |
| #define CPLD_CKS_96000HZ (CPLD_CKS1 | CPLD_CKS0) |
| #define CPLD_CKS_176400HZ (CPLD_CKS2) |
| #define CPLD_CKS_192000HZ (CPLD_CKS2 | CPLD_CKS0) |
| |
| #define CPLD_CKS_MASK (CPLD_CKS0 | CPLD_CKS1 | CPLD_CKS2) |
| |
| /* external clock (CPLD_SYNC_SEL = 1) options */ |
| /* external clock - SPDIF */ |
| #define CPLD_EXT_SPDIF (0 | CPLD_SYNC_SEL) |
| /* external clock - WordClock 1xfs */ |
| #define CPLD_EXT_WORDCLOCK_1FS (CPLD_CKS1 | CPLD_SYNC_SEL) |
| /* external clock - WordClock 256xfs */ |
| #define CPLD_EXT_WORDCLOCK_256FS (CPLD_CKS1 | CPLD_WORD_SEL |\ |
| CPLD_SYNC_SEL) |
| |
| #define EXT_SPDIF_TYPE 0 |
| #define EXT_WORDCLOCK_1FS_TYPE 1 |
| #define EXT_WORDCLOCK_256FS_TYPE 2 |
| |
| #define AK4620_DFS0 (1<<0) |
| #define AK4620_DFS1 (1<<1) |
| #define AK4620_CKS0 (1<<2) |
| #define AK4620_CKS1 (1<<3) |
| /* Clock and Format Control register */ |
| #define AK4620_DFS_REG 0x02 |
| |
| /* Deem and Volume Control register */ |
| #define AK4620_DEEMVOL_REG 0x03 |
| #define AK4620_SMUTE (1<<7) |
| |
| #ifdef CONFIG_PROC_FS |
| /* |
| * Conversion from int value to its binary form. Used for debugging. |
| * The output buffer must be allocated prior to calling the function. |
| */ |
| static char *get_binary(char *buffer, int value) |
| { |
| int i, j, pos; |
| pos = 0; |
| for (i = 0; i < 4; ++i) { |
| for (j = 0; j < 8; ++j) { |
| if (value & (1 << (31-(i*8 + j)))) |
| buffer[pos] = '1'; |
| else |
| buffer[pos] = '0'; |
| pos++; |
| } |
| if (i < 3) { |
| buffer[pos] = ' '; |
| pos++; |
| } |
| } |
| buffer[pos] = '\0'; |
| return buffer; |
| } |
| #endif /* CONFIG_PROC_FS */ |
| |
| /* |
| * Initial setup of the conversion array GPIO <-> rate |
| */ |
| static unsigned int qtet_rates[] = { |
| 44100, 48000, 88200, |
| 96000, 176400, 192000, |
| }; |
| |
| static unsigned int cks_vals[] = { |
| CPLD_CKS_44100HZ, CPLD_CKS_48000HZ, CPLD_CKS_88200HZ, |
| CPLD_CKS_96000HZ, CPLD_CKS_176400HZ, CPLD_CKS_192000HZ, |
| }; |
| |
| static struct snd_pcm_hw_constraint_list qtet_rates_info = { |
| .count = ARRAY_SIZE(qtet_rates), |
| .list = qtet_rates, |
| .mask = 0, |
| }; |
| |
| static void qtet_ak4113_write(void *private_data, unsigned char reg, |
| unsigned char val) |
| { |
| snd_vt1724_write_i2c((struct snd_ice1712 *)private_data, AK4113_ADDR, |
| reg, val); |
| } |
| |
| static unsigned char qtet_ak4113_read(void *private_data, unsigned char reg) |
| { |
| return snd_vt1724_read_i2c((struct snd_ice1712 *)private_data, |
| AK4113_ADDR, reg); |
| } |
| |
| |
| /* |
| * AK4620 section |
| */ |
| |
| /* |
| * Write data to addr register of ak4620 |
| */ |
| static void qtet_akm_write(struct snd_akm4xxx *ak, int chip, |
| unsigned char addr, unsigned char data) |
| { |
| unsigned int tmp, orig_dir; |
| int idx; |
| unsigned int addrdata; |
| struct snd_ice1712 *ice = ak->private_data[0]; |
| |
| if (snd_BUG_ON(chip < 0 || chip >= 4)) |
| return; |
| /*dev_dbg(ice->card->dev, "Writing to AK4620: chip=%d, addr=0x%x, |
| data=0x%x\n", chip, addr, data);*/ |
| orig_dir = ice->gpio.get_dir(ice); |
| ice->gpio.set_dir(ice, orig_dir | GPIO_SPI_ALL); |
| /* set mask - only SPI bits */ |
| ice->gpio.set_mask(ice, ~GPIO_SPI_ALL); |
| |
| tmp = ice->gpio.get_data(ice); |
| /* high all */ |
| tmp |= GPIO_SPI_ALL; |
| ice->gpio.set_data(ice, tmp); |
| udelay(100); |
| /* drop chip select */ |
| if (chip) |
| /* CODEC 1 */ |
| tmp &= ~GPIO_SPI_CSN1; |
| else |
| tmp &= ~GPIO_SPI_CSN0; |
| ice->gpio.set_data(ice, tmp); |
| udelay(100); |
| |
| /* build I2C address + data byte */ |
| addrdata = (AK4620_ADDR << 6) | 0x20 | (addr & 0x1f); |
| addrdata = (addrdata << 8) | data; |
| for (idx = 15; idx >= 0; idx--) { |
| /* drop clock */ |
| tmp &= ~GPIO_D5_SPI_CCLK; |
| ice->gpio.set_data(ice, tmp); |
| udelay(100); |
| /* set data */ |
| if (addrdata & (1 << idx)) |
| tmp |= GPIO_D4_SPI_CDTO; |
| else |
| tmp &= ~GPIO_D4_SPI_CDTO; |
| ice->gpio.set_data(ice, tmp); |
| udelay(100); |
| /* raise clock */ |
| tmp |= GPIO_D5_SPI_CCLK; |
| ice->gpio.set_data(ice, tmp); |
| udelay(100); |
| } |
| /* all back to 1 */ |
| tmp |= GPIO_SPI_ALL; |
| ice->gpio.set_data(ice, tmp); |
| udelay(100); |
| |
| /* return all gpios to non-writable */ |
| ice->gpio.set_mask(ice, 0xffffff); |
| /* restore GPIOs direction */ |
| ice->gpio.set_dir(ice, orig_dir); |
| } |
| |
| static void qtet_akm_set_regs(struct snd_akm4xxx *ak, unsigned char addr, |
| unsigned char mask, unsigned char value) |
| { |
| unsigned char tmp; |
| int chip; |
| for (chip = 0; chip < ak->num_chips; chip++) { |
| tmp = snd_akm4xxx_get(ak, chip, addr); |
| /* clear the bits */ |
| tmp &= ~mask; |
| /* set the new bits */ |
| tmp |= value; |
| snd_akm4xxx_write(ak, chip, addr, tmp); |
| } |
| } |
| |
| /* |
| * change the rate of AK4620 |
| */ |
| static void qtet_akm_set_rate_val(struct snd_akm4xxx *ak, unsigned int rate) |
| { |
| unsigned char ak4620_dfs; |
| |
| if (rate == 0) /* no hint - S/PDIF input is master or the new spdif |
| input rate undetected, simply return */ |
| return; |
| |
| /* adjust DFS on codecs - see datasheet */ |
| if (rate > 108000) |
| ak4620_dfs = AK4620_DFS1 | AK4620_CKS1; |
| else if (rate > 54000) |
| ak4620_dfs = AK4620_DFS0 | AK4620_CKS0; |
| else |
| ak4620_dfs = 0; |
| |
| /* set new value */ |
| qtet_akm_set_regs(ak, AK4620_DFS_REG, AK4620_DFS0 | AK4620_DFS1 | |
| AK4620_CKS0 | AK4620_CKS1, ak4620_dfs); |
| } |
| |
| #define AK_CONTROL(xname, xch) { .name = xname, .num_channels = xch } |
| |
| #define PCM_12_PLAYBACK_VOLUME "PCM 1/2 Playback Volume" |
| #define PCM_34_PLAYBACK_VOLUME "PCM 3/4 Playback Volume" |
| #define PCM_12_CAPTURE_VOLUME "PCM 1/2 Capture Volume" |
| #define PCM_34_CAPTURE_VOLUME "PCM 3/4 Capture Volume" |
| |
| static const struct snd_akm4xxx_dac_channel qtet_dac[] = { |
| AK_CONTROL(PCM_12_PLAYBACK_VOLUME, 2), |
| AK_CONTROL(PCM_34_PLAYBACK_VOLUME, 2), |
| }; |
| |
| static const struct snd_akm4xxx_adc_channel qtet_adc[] = { |
| AK_CONTROL(PCM_12_CAPTURE_VOLUME, 2), |
| AK_CONTROL(PCM_34_CAPTURE_VOLUME, 2), |
| }; |
| |
| static struct snd_akm4xxx akm_qtet_dac = { |
| .type = SND_AK4620, |
| .num_dacs = 4, /* DAC1 - Output 12 |
| */ |
| .num_adcs = 4, /* ADC1 - Input 12 |
| */ |
| .ops = { |
| .write = qtet_akm_write, |
| .set_rate_val = qtet_akm_set_rate_val, |
| }, |
| .dac_info = qtet_dac, |
| .adc_info = qtet_adc, |
| }; |
| |
| /* Communication routines with the CPLD */ |
| |
| |
| /* Writes data to external register reg, both reg and data are |
| * GPIO representations */ |
| static void reg_write(struct snd_ice1712 *ice, unsigned int reg, |
| unsigned int data) |
| { |
| unsigned int tmp; |
| |
| mutex_lock(&ice->gpio_mutex); |
| /* set direction of used GPIOs*/ |
| /* all outputs */ |
| tmp = 0x00ffff; |
| ice->gpio.set_dir(ice, tmp); |
| /* mask - writable bits */ |
| ice->gpio.set_mask(ice, ~(tmp)); |
| /* write the data */ |
| tmp = ice->gpio.get_data(ice); |
| tmp &= ~GPIO_DATA_MASK; |
| tmp |= data; |
| ice->gpio.set_data(ice, tmp); |
| udelay(100); |
| /* drop output enable */ |
| tmp &= ~GPIO_EX_GPIOE; |
| ice->gpio.set_data(ice, tmp); |
| udelay(100); |
| /* drop the register gpio */ |
| tmp &= ~reg; |
| ice->gpio.set_data(ice, tmp); |
| udelay(100); |
| /* raise the register GPIO */ |
| tmp |= reg; |
| ice->gpio.set_data(ice, tmp); |
| udelay(100); |
| |
| /* raise all data gpios */ |
| tmp |= GPIO_DATA_MASK; |
| ice->gpio.set_data(ice, tmp); |
| /* mask - immutable bits */ |
| ice->gpio.set_mask(ice, 0xffffff); |
| /* outputs only 8-15 */ |
| ice->gpio.set_dir(ice, 0x00ff00); |
| mutex_unlock(&ice->gpio_mutex); |
| } |
| |
| static unsigned int get_scr(struct snd_ice1712 *ice) |
| { |
| struct qtet_spec *spec = ice->spec; |
| return spec->scr; |
| } |
| |
| static unsigned int get_mcr(struct snd_ice1712 *ice) |
| { |
| struct qtet_spec *spec = ice->spec; |
| return spec->mcr; |
| } |
| |
| static unsigned int get_cpld(struct snd_ice1712 *ice) |
| { |
| struct qtet_spec *spec = ice->spec; |
| return spec->cpld; |
| } |
| |
| static void set_scr(struct snd_ice1712 *ice, unsigned int val) |
| { |
| struct qtet_spec *spec = ice->spec; |
| reg_write(ice, GPIO_SCR, val); |
| spec->scr = val; |
| } |
| |
| static void set_mcr(struct snd_ice1712 *ice, unsigned int val) |
| { |
| struct qtet_spec *spec = ice->spec; |
| reg_write(ice, GPIO_MCR, val); |
| spec->mcr = val; |
| } |
| |
| static void set_cpld(struct snd_ice1712 *ice, unsigned int val) |
| { |
| struct qtet_spec *spec = ice->spec; |
| reg_write(ice, GPIO_CPLD_CSN, val); |
| spec->cpld = val; |
| } |
| #ifdef CONFIG_PROC_FS |
| static void proc_regs_read(struct snd_info_entry *entry, |
| struct snd_info_buffer *buffer) |
| { |
| struct snd_ice1712 *ice = entry->private_data; |
| char bin_buffer[36]; |
| |
| snd_iprintf(buffer, "SCR: %s\n", get_binary(bin_buffer, |
| get_scr(ice))); |
| snd_iprintf(buffer, "MCR: %s\n", get_binary(bin_buffer, |
| get_mcr(ice))); |
| snd_iprintf(buffer, "CPLD: %s\n", get_binary(bin_buffer, |
| get_cpld(ice))); |
| } |
| |
| static void proc_init(struct snd_ice1712 *ice) |
| { |
| struct snd_info_entry *entry; |
| if (!snd_card_proc_new(ice->card, "quartet", &entry)) |
| snd_info_set_text_ops(entry, ice, proc_regs_read); |
| } |
| #else /* !CONFIG_PROC_FS */ |
| static void proc_init(struct snd_ice1712 *ice) {} |
| #endif |
| |
| static int qtet_mute_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol); |
| unsigned int val; |
| val = get_scr(ice) & SCR_MUTE; |
| ucontrol->value.integer.value[0] = (val) ? 0 : 1; |
| return 0; |
| } |
| |
| static int qtet_mute_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol); |
| unsigned int old, new, smute; |
| old = get_scr(ice) & SCR_MUTE; |
| if (ucontrol->value.integer.value[0]) { |
| /* unmute */ |
| new = 0; |
| /* un-smuting DAC */ |
| smute = 0; |
| } else { |
| /* mute */ |
| new = SCR_MUTE; |
| /* smuting DAC */ |
| smute = AK4620_SMUTE; |
| } |
| if (old != new) { |
| struct snd_akm4xxx *ak = ice->akm; |
| set_scr(ice, (get_scr(ice) & ~SCR_MUTE) | new); |
| /* set smute */ |
| qtet_akm_set_regs(ak, AK4620_DEEMVOL_REG, AK4620_SMUTE, smute); |
| return 1; |
| } |
| /* no change */ |
| return 0; |
| } |
| |
| static int qtet_ain12_enum_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| static const char * const texts[3] = |
| {"Line In 1/2", "Mic", "Mic + Low-cut"}; |
| return snd_ctl_enum_info(uinfo, 1, ARRAY_SIZE(texts), texts); |
| } |
| |
| static int qtet_ain12_sw_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol); |
| unsigned int val, result; |
| val = get_scr(ice) & (SCR_AIN12_SEL1 | SCR_AIN12_SEL0); |
| switch (val) { |
| case SCR_AIN12_LINE: |
| result = 0; |
| break; |
| case SCR_AIN12_MIC: |
| result = 1; |
| break; |
| case SCR_AIN12_LOWCUT: |
| result = 2; |
| break; |
| default: |
| /* BUG - no other combinations allowed */ |
| snd_BUG(); |
| result = 0; |
| } |
| ucontrol->value.integer.value[0] = result; |
| return 0; |
| } |
| |
| static int qtet_ain12_sw_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol); |
| unsigned int old, new, tmp, masked_old; |
| old = new = get_scr(ice); |
| masked_old = old & (SCR_AIN12_SEL1 | SCR_AIN12_SEL0); |
| tmp = ucontrol->value.integer.value[0]; |
| if (tmp == 2) |
| tmp = 3; /* binary 10 is not supported */ |
| tmp <<= 4; /* shifting to SCR_AIN12_SEL0 */ |
| if (tmp != masked_old) { |
| /* change requested */ |
| switch (tmp) { |
| case SCR_AIN12_LINE: |
| new = old & ~(SCR_AIN12_SEL1 | SCR_AIN12_SEL0); |
| set_scr(ice, new); |
| /* turn off relay */ |
| new &= ~SCR_RELAY; |
| set_scr(ice, new); |
| break; |
| case SCR_AIN12_MIC: |
| /* turn on relay */ |
| new = old | SCR_RELAY; |
| set_scr(ice, new); |
| new = (new & ~SCR_AIN12_SEL1) | SCR_AIN12_SEL0; |
| set_scr(ice, new); |
| break; |
| case SCR_AIN12_LOWCUT: |
| /* turn on relay */ |
| new = old | SCR_RELAY; |
| set_scr(ice, new); |
| new |= SCR_AIN12_SEL1 | SCR_AIN12_SEL0; |
| set_scr(ice, new); |
| break; |
| default: |
| snd_BUG(); |
| } |
| return 1; |
| } |
| /* no change */ |
| return 0; |
| } |
| |
| static int qtet_php_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol); |
| unsigned int val; |
| /* if phantom voltage =48V, phantom on */ |
| val = get_scr(ice) & SCR_PHP_V; |
| ucontrol->value.integer.value[0] = val ? 1 : 0; |
| return 0; |
| } |
| |
| static int qtet_php_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol); |
| unsigned int old, new; |
| old = new = get_scr(ice); |
| if (ucontrol->value.integer.value[0] /* phantom on requested */ |
| && (~old & SCR_PHP_V)) /* 0 = voltage 5V */ { |
| /* is off, turn on */ |
| /* turn voltage on first, = 1 */ |
| new = old | SCR_PHP_V; |
| set_scr(ice, new); |
| /* turn phantom on, = 0 */ |
| new &= ~SCR_PHP; |
| set_scr(ice, new); |
| } else if (!ucontrol->value.integer.value[0] && (old & SCR_PHP_V)) { |
| /* phantom off requested and 1 = voltage 48V */ |
| /* is on, turn off */ |
| /* turn voltage off first, = 0 */ |
| new = old & ~SCR_PHP_V; |
| set_scr(ice, new); |
| /* turn phantom off, = 1 */ |
| new |= SCR_PHP; |
| set_scr(ice, new); |
| } |
| if (old != new) |
| return 1; |
| /* no change */ |
| return 0; |
| } |
| |
| #define PRIV_SW(xid, xbit, xreg) [xid] = {.bit = xbit,\ |
| .set_register = set_##xreg,\ |
| .get_register = get_##xreg, } |
| |
| |
| #define PRIV_ENUM2(xid, xbit, xreg, xtext1, xtext2) [xid] = {.bit = xbit,\ |
| .set_register = set_##xreg,\ |
| .get_register = get_##xreg,\ |
| .texts = {xtext1, xtext2} } |
| |
| static struct qtet_kcontrol_private qtet_privates[] = { |
| PRIV_ENUM2(IN12_SEL, CPLD_IN12_SEL, cpld, "An In 1/2", "An In 3/4"), |
| PRIV_ENUM2(IN34_SEL, CPLD_IN34_SEL, cpld, "An In 3/4", "IEC958 In"), |
| PRIV_ENUM2(AIN34_SEL, SCR_AIN34_SEL, scr, "Line In 3/4", "Hi-Z"), |
| PRIV_ENUM2(COAX_OUT, CPLD_COAX_OUT, cpld, "IEC958", "I2S"), |
| PRIV_SW(IN12_MON12, MCR_IN12_MON12, mcr), |
| PRIV_SW(IN12_MON34, MCR_IN12_MON34, mcr), |
| PRIV_SW(IN34_MON12, MCR_IN34_MON12, mcr), |
| PRIV_SW(IN34_MON34, MCR_IN34_MON34, mcr), |
| PRIV_SW(OUT12_MON34, MCR_OUT12_MON34, mcr), |
| PRIV_SW(OUT34_MON12, MCR_OUT34_MON12, mcr), |
| }; |
| |
| static int qtet_enum_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| struct qtet_kcontrol_private private = |
| qtet_privates[kcontrol->private_value]; |
| return snd_ctl_enum_info(uinfo, 1, ARRAY_SIZE(private.texts), |
| private.texts); |
| } |
| |
| static int qtet_sw_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct qtet_kcontrol_private private = |
| qtet_privates[kcontrol->private_value]; |
| struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol); |
| ucontrol->value.integer.value[0] = |
| (private.get_register(ice) & private.bit) ? 1 : 0; |
| return 0; |
| } |
| |
| static int qtet_sw_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct qtet_kcontrol_private private = |
| qtet_privates[kcontrol->private_value]; |
| struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol); |
| unsigned int old, new; |
| old = private.get_register(ice); |
| if (ucontrol->value.integer.value[0]) |
| new = old | private.bit; |
| else |
| new = old & ~private.bit; |
| if (old != new) { |
| private.set_register(ice, new); |
| return 1; |
| } |
| /* no change */ |
| return 0; |
| } |
| |
| #define qtet_sw_info snd_ctl_boolean_mono_info |
| |
| #define QTET_CONTROL(xname, xtype, xpriv) \ |
| {.iface = SNDRV_CTL_ELEM_IFACE_MIXER,\ |
| .name = xname,\ |
| .info = qtet_##xtype##_info,\ |
| .get = qtet_sw_get,\ |
| .put = qtet_sw_put,\ |
| .private_value = xpriv } |
| |
| static struct snd_kcontrol_new qtet_controls[] = { |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "Master Playback Switch", |
| .info = qtet_sw_info, |
| .get = qtet_mute_get, |
| .put = qtet_mute_put, |
| .private_value = 0 |
| }, |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "Phantom Power", |
| .info = qtet_sw_info, |
| .get = qtet_php_get, |
| .put = qtet_php_put, |
| .private_value = 0 |
| }, |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "Analog In 1/2 Capture Switch", |
| .info = qtet_ain12_enum_info, |
| .get = qtet_ain12_sw_get, |
| .put = qtet_ain12_sw_put, |
| .private_value = 0 |
| }, |
| QTET_CONTROL("Analog In 3/4 Capture Switch", enum, AIN34_SEL), |
| QTET_CONTROL("PCM In 1/2 Capture Switch", enum, IN12_SEL), |
| QTET_CONTROL("PCM In 3/4 Capture Switch", enum, IN34_SEL), |
| QTET_CONTROL("Coax Output Source", enum, COAX_OUT), |
| QTET_CONTROL("Analog In 1/2 to Monitor 1/2", sw, IN12_MON12), |
| QTET_CONTROL("Analog In 1/2 to Monitor 3/4", sw, IN12_MON34), |
| QTET_CONTROL("Analog In 3/4 to Monitor 1/2", sw, IN34_MON12), |
| QTET_CONTROL("Analog In 3/4 to Monitor 3/4", sw, IN34_MON34), |
| QTET_CONTROL("Output 1/2 to Monitor 3/4", sw, OUT12_MON34), |
| QTET_CONTROL("Output 3/4 to Monitor 1/2", sw, OUT34_MON12), |
| }; |
| |
| static char *slave_vols[] = { |
| PCM_12_PLAYBACK_VOLUME, |
| PCM_34_PLAYBACK_VOLUME, |
| NULL |
| }; |
| |
| static |
| DECLARE_TLV_DB_SCALE(qtet_master_db_scale, -6350, 50, 1); |
| |
| static struct snd_kcontrol *ctl_find(struct snd_card *card, |
| const char *name) |
| { |
| struct snd_ctl_elem_id sid; |
| memset(&sid, 0, sizeof(sid)); |
| /* FIXME: strcpy is bad. */ |
| strcpy(sid.name, name); |
| sid.iface = SNDRV_CTL_ELEM_IFACE_MIXER; |
| return snd_ctl_find_id(card, &sid); |
| } |
| |
| static void add_slaves(struct snd_card *card, |
| struct snd_kcontrol *master, char * const *list) |
| { |
| for (; *list; list++) { |
| struct snd_kcontrol *slave = ctl_find(card, *list); |
| if (slave) |
| snd_ctl_add_slave(master, slave); |
| } |
| } |
| |
| static int qtet_add_controls(struct snd_ice1712 *ice) |
| { |
| struct qtet_spec *spec = ice->spec; |
| int err, i; |
| struct snd_kcontrol *vmaster; |
| err = snd_ice1712_akm4xxx_build_controls(ice); |
| if (err < 0) |
| return err; |
| for (i = 0; i < ARRAY_SIZE(qtet_controls); i++) { |
| err = snd_ctl_add(ice->card, |
| snd_ctl_new1(&qtet_controls[i], ice)); |
| if (err < 0) |
| return err; |
| } |
| |
| /* Create virtual master control */ |
| vmaster = snd_ctl_make_virtual_master("Master Playback Volume", |
| qtet_master_db_scale); |
| if (!vmaster) |
| return -ENOMEM; |
| add_slaves(ice->card, vmaster, slave_vols); |
| err = snd_ctl_add(ice->card, vmaster); |
| if (err < 0) |
| return err; |
| /* only capture SPDIF over AK4113 */ |
| return snd_ak4113_build(spec->ak4113, |
| ice->pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream); |
| } |
| |
| static inline int qtet_is_spdif_master(struct snd_ice1712 *ice) |
| { |
| /* CPLD_SYNC_SEL: 0 = internal, 1 = external (i.e. spdif master) */ |
| return (get_cpld(ice) & CPLD_SYNC_SEL) ? 1 : 0; |
| } |
| |
| static unsigned int qtet_get_rate(struct snd_ice1712 *ice) |
| { |
| int i; |
| unsigned char result; |
| |
| result = get_cpld(ice) & CPLD_CKS_MASK; |
| for (i = 0; i < ARRAY_SIZE(cks_vals); i++) |
| if (cks_vals[i] == result) |
| return qtet_rates[i]; |
| return 0; |
| } |
| |
| static int get_cks_val(int rate) |
| { |
| int i; |
| for (i = 0; i < ARRAY_SIZE(qtet_rates); i++) |
| if (qtet_rates[i] == rate) |
| return cks_vals[i]; |
| return 0; |
| } |
| |
| /* setting new rate */ |
| static void qtet_set_rate(struct snd_ice1712 *ice, unsigned int rate) |
| { |
| unsigned int new; |
| unsigned char val; |
| /* switching ice1724 to external clock - supplied by ext. circuits */ |
| val = inb(ICEMT1724(ice, RATE)); |
| outb(val | VT1724_SPDIF_MASTER, ICEMT1724(ice, RATE)); |
| |
| new = (get_cpld(ice) & ~CPLD_CKS_MASK) | get_cks_val(rate); |
| /* switch to internal clock, drop CPLD_SYNC_SEL */ |
| new &= ~CPLD_SYNC_SEL; |
| /* dev_dbg(ice->card->dev, "QT - set_rate: old %x, new %x\n", |
| get_cpld(ice), new); */ |
| set_cpld(ice, new); |
| } |
| |
| static inline unsigned char qtet_set_mclk(struct snd_ice1712 *ice, |
| unsigned int rate) |
| { |
| /* no change in master clock */ |
| return 0; |
| } |
| |
| /* setting clock to external - SPDIF */ |
| static int qtet_set_spdif_clock(struct snd_ice1712 *ice, int type) |
| { |
| unsigned int old, new; |
| |
| old = new = get_cpld(ice); |
| new &= ~(CPLD_CKS_MASK | CPLD_WORD_SEL); |
| switch (type) { |
| case EXT_SPDIF_TYPE: |
| new |= CPLD_EXT_SPDIF; |
| break; |
| case EXT_WORDCLOCK_1FS_TYPE: |
| new |= CPLD_EXT_WORDCLOCK_1FS; |
| break; |
| case EXT_WORDCLOCK_256FS_TYPE: |
| new |= CPLD_EXT_WORDCLOCK_256FS; |
| break; |
| default: |
| snd_BUG(); |
| } |
| if (old != new) { |
| set_cpld(ice, new); |
| /* changed */ |
| return 1; |
| } |
| return 0; |
| } |
| |
| static int qtet_get_spdif_master_type(struct snd_ice1712 *ice) |
| { |
| unsigned int val; |
| int result; |
| val = get_cpld(ice); |
| /* checking only rate/clock-related bits */ |
| val &= (CPLD_CKS_MASK | CPLD_WORD_SEL | CPLD_SYNC_SEL); |
| if (!(val & CPLD_SYNC_SEL)) { |
| /* switched to internal clock, is not any external type */ |
| result = -1; |
| } else { |
| switch (val) { |
| case (CPLD_EXT_SPDIF): |
| result = EXT_SPDIF_TYPE; |
| break; |
| case (CPLD_EXT_WORDCLOCK_1FS): |
| result = EXT_WORDCLOCK_1FS_TYPE; |
| break; |
| case (CPLD_EXT_WORDCLOCK_256FS): |
| result = EXT_WORDCLOCK_256FS_TYPE; |
| break; |
| default: |
| /* undefined combination of external clock setup */ |
| snd_BUG(); |
| result = 0; |
| } |
| } |
| return result; |
| } |
| |
| /* Called when ak4113 detects change in the input SPDIF stream */ |
| static void qtet_ak4113_change(struct ak4113 *ak4113, unsigned char c0, |
| unsigned char c1) |
| { |
| struct snd_ice1712 *ice = ak4113->change_callback_private; |
| int rate; |
| if ((qtet_get_spdif_master_type(ice) == EXT_SPDIF_TYPE) && |
| c1) { |
| /* only for SPDIF master mode, rate was changed */ |
| rate = snd_ak4113_external_rate(ak4113); |
| /* dev_dbg(ice->card->dev, "ak4113 - input rate changed to %d\n", |
| rate); */ |
| qtet_akm_set_rate_val(ice->akm, rate); |
| } |
| } |
| |
| /* |
| * If clock slaved to SPDIF-IN, setting runtime rate |
| * to the detected external rate |
| */ |
| static void qtet_spdif_in_open(struct snd_ice1712 *ice, |
| struct snd_pcm_substream *substream) |
| { |
| struct qtet_spec *spec = ice->spec; |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| int rate; |
| |
| if (qtet_get_spdif_master_type(ice) != EXT_SPDIF_TYPE) |
| /* not external SPDIF, no rate limitation */ |
| return; |
| /* only external SPDIF can detect incoming sample rate */ |
| rate = snd_ak4113_external_rate(spec->ak4113); |
| if (rate >= runtime->hw.rate_min && rate <= runtime->hw.rate_max) { |
| runtime->hw.rate_min = rate; |
| runtime->hw.rate_max = rate; |
| } |
| } |
| |
| /* |
| * initialize the chip |
| */ |
| static int qtet_init(struct snd_ice1712 *ice) |
| { |
| static const unsigned char ak4113_init_vals[] = { |
| /* AK4113_REG_PWRDN */ AK4113_RST | AK4113_PWN | |
| AK4113_OCKS0 | AK4113_OCKS1, |
| /* AK4113_REQ_FORMAT */ AK4113_DIF_I24I2S | AK4113_VTX | |
| AK4113_DEM_OFF | AK4113_DEAU, |
| /* AK4113_REG_IO0 */ AK4113_OPS2 | AK4113_TXE | |
| AK4113_XTL_24_576M, |
| /* AK4113_REG_IO1 */ AK4113_EFH_1024LRCLK | AK4113_IPS(0), |
| /* AK4113_REG_INT0_MASK */ 0, |
| /* AK4113_REG_INT1_MASK */ 0, |
| /* AK4113_REG_DATDTS */ 0, |
| }; |
| int err; |
| struct qtet_spec *spec; |
| struct snd_akm4xxx *ak; |
| unsigned char val; |
| |
| /* switching ice1724 to external clock - supplied by ext. circuits */ |
| val = inb(ICEMT1724(ice, RATE)); |
| outb(val | VT1724_SPDIF_MASTER, ICEMT1724(ice, RATE)); |
| |
| spec = kzalloc(sizeof(*spec), GFP_KERNEL); |
| if (!spec) |
| return -ENOMEM; |
| /* qtet is clocked by Xilinx array */ |
| ice->hw_rates = &qtet_rates_info; |
| ice->is_spdif_master = qtet_is_spdif_master; |
| ice->get_rate = qtet_get_rate; |
| ice->set_rate = qtet_set_rate; |
| ice->set_mclk = qtet_set_mclk; |
| ice->set_spdif_clock = qtet_set_spdif_clock; |
| ice->get_spdif_master_type = qtet_get_spdif_master_type; |
| ice->ext_clock_names = ext_clock_names; |
| ice->ext_clock_count = ARRAY_SIZE(ext_clock_names); |
| /* since Qtet can detect correct SPDIF-in rate, all streams can be |
| * limited to this specific rate */ |
| ice->spdif.ops.open = ice->pro_open = qtet_spdif_in_open; |
| ice->spec = spec; |
| |
| /* Mute Off */ |
| /* SCR Initialize*/ |
| /* keep codec power down first */ |
| set_scr(ice, SCR_PHP); |
| udelay(1); |
| /* codec power up */ |
| set_scr(ice, SCR_PHP | SCR_CODEC_PDN); |
| |
| /* MCR Initialize */ |
| set_mcr(ice, 0); |
| |
| /* CPLD Initialize */ |
| set_cpld(ice, 0); |
| |
| |
| ice->num_total_dacs = 2; |
| ice->num_total_adcs = 2; |
| |
| ice->akm = kcalloc(2, sizeof(struct snd_akm4xxx), GFP_KERNEL); |
| ak = ice->akm; |
| if (!ak) |
| return -ENOMEM; |
| /* only one codec with two chips */ |
| ice->akm_codecs = 1; |
| err = snd_ice1712_akm4xxx_init(ak, &akm_qtet_dac, NULL, ice); |
| if (err < 0) |
| return err; |
| err = snd_ak4113_create(ice->card, |
| qtet_ak4113_read, |
| qtet_ak4113_write, |
| ak4113_init_vals, |
| ice, &spec->ak4113); |
| if (err < 0) |
| return err; |
| /* callback for codecs rate setting */ |
| spec->ak4113->change_callback = qtet_ak4113_change; |
| spec->ak4113->change_callback_private = ice; |
| /* AK41143 in Quartet can detect external rate correctly |
| * (i.e. check_flags = 0) */ |
| spec->ak4113->check_flags = 0; |
| |
| proc_init(ice); |
| |
| qtet_set_rate(ice, 44100); |
| return 0; |
| } |
| |
| static unsigned char qtet_eeprom[] = { |
| [ICE_EEP2_SYSCONF] = 0x28, /* clock 256(24MHz), mpu401, 1xADC, |
| 1xDACs, SPDIF in */ |
| [ICE_EEP2_ACLINK] = 0x80, /* I2S */ |
| [ICE_EEP2_I2S] = 0x78, /* 96k, 24bit, 192k */ |
| [ICE_EEP2_SPDIF] = 0xc3, /* out-en, out-int, in, out-ext */ |
| [ICE_EEP2_GPIO_DIR] = 0x00, /* 0-7 inputs, switched to output |
| only during output operations */ |
| [ICE_EEP2_GPIO_DIR1] = 0xff, /* 8-15 outputs */ |
| [ICE_EEP2_GPIO_DIR2] = 0x00, |
| [ICE_EEP2_GPIO_MASK] = 0xff, /* changed only for OUT operations */ |
| [ICE_EEP2_GPIO_MASK1] = 0x00, |
| [ICE_EEP2_GPIO_MASK2] = 0xff, |
| |
| [ICE_EEP2_GPIO_STATE] = 0x00, /* inputs */ |
| [ICE_EEP2_GPIO_STATE1] = 0x7d, /* all 1, but GPIO_CPLD_RW |
| and GPIO15 always zero */ |
| [ICE_EEP2_GPIO_STATE2] = 0x00, /* inputs */ |
| }; |
| |
| /* entry point */ |
| struct snd_ice1712_card_info snd_vt1724_qtet_cards[] = { |
| { |
| .subvendor = VT1724_SUBDEVICE_QTET, |
| .name = "Infrasonic Quartet", |
| .model = "quartet", |
| .chip_init = qtet_init, |
| .build_controls = qtet_add_controls, |
| .eeprom_size = sizeof(qtet_eeprom), |
| .eeprom_data = qtet_eeprom, |
| }, |
| { } /* terminator */ |
| }; |