powerpc/mpc85xx: Remove SPI and NAND partition from bsc9131rdb.dtsi
* Run "mtdparts default" on u-boot to create dynamic partitions
* Or use dynamic mtd partition with the help of bootargs in u-boot
Append bootargs with:
"mtdparts=ff800000.flash:1m(nand_uboot),512K(nand_dtb),8m(nand_kernel),-(fs);\
spiff707000.0:1m(spi_uboot),4m(spi_kernel),512k(spi_dtb),-(fs)'"
Signed-off-by: Ashish Kumar <Ashish.Kumar@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
diff --git a/arch/powerpc/boot/dts/bsc9131rdb.dtsi b/arch/powerpc/boot/dts/bsc9131rdb.dtsi
index 9e6c013..45efcba 100644
--- a/arch/powerpc/boot/dts/bsc9131rdb.dtsi
+++ b/arch/powerpc/boot/dts/bsc9131rdb.dtsi
@@ -40,31 +40,6 @@
compatible = "fsl,ifc-nand";
reg = <0x0 0x0 0x4000>;
- partition@0 {
- /* This location must not be altered */
- /* 3MB for u-boot Bootloader Image */
- reg = <0x0 0x00300000>;
- label = "NAND U-Boot Image";
- read-only;
- };
-
- partition@300000 {
- /* 1MB for DTB Image */
- reg = <0x00300000 0x00100000>;
- label = "NAND DTB Image";
- };
-
- partition@400000 {
- /* 8MB for Linux Kernel Image */
- reg = <0x00400000 0x00800000>;
- label = "NAND Linux Kernel Image";
- };
-
- partition@c00000 {
- /* Rest space for Root file System Image */
- reg = <0x00c00000 0x07400000>;
- label = "NAND RFS Image";
- };
};
};
@@ -82,31 +57,6 @@
reg = <0>;
spi-max-frequency = <50000000>;
- /* 512KB for u-boot Bootloader Image */
- partition@0 {
- reg = <0x0 0x00080000>;
- label = "SPI Flash U-Boot Image";
- read-only;
- };
-
- /* 512KB for DTB Image */
- partition@80000 {
- reg = <0x00080000 0x00080000>;
- label = "SPI Flash DTB Image";
- };
-
- /* 4MB for Linux Kernel Image */
- partition@100000 {
- reg = <0x00100000 0x00400000>;
- label = "SPI Flash Kernel Image";
- };
-
- /*11MB for RFS Image */
- partition@500000 {
- reg = <0x00500000 0x00B00000>;
- label = "SPI Flash RFS Image";
- };
-
};
};