pcmcia: soc_common: switch to using gpio_descs
Switch to using the gpiod_* consumer API rather than the legacy API.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c
index 24ac27f..e07d84a 100644
--- a/drivers/pcmcia/soc_common.c
+++ b/drivers/pcmcia/soc_common.c
@@ -33,6 +33,7 @@
#include <linux/cpufreq.h>
#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
@@ -126,6 +127,30 @@
__soc_pcmcia_hw_shutdown(skt, ARRAY_SIZE(skt->stat));
}
+int soc_pcmcia_request_gpiods(struct soc_pcmcia_socket *skt)
+{
+ struct device *dev = skt->socket.dev.parent;
+ struct gpio_desc *desc;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(skt->stat); i++) {
+ if (!skt->stat[i].name)
+ continue;
+
+ desc = devm_gpiod_get(dev, skt->stat[i].name, GPIOD_IN);
+ if (IS_ERR(desc)) {
+ dev_err(dev, "Failed to get GPIO for %s: %ld\n",
+ skt->stat[i].name, PTR_ERR(desc));
+ return PTR_ERR(desc);
+ }
+
+ skt->stat[i].desc = desc;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(soc_pcmcia_request_gpiods);
+
static int soc_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
int ret = 0, i;
@@ -140,8 +165,6 @@
for (i = 0; i < ARRAY_SIZE(skt->stat); i++) {
if (gpio_is_valid(skt->stat[i].gpio)) {
- int irq;
-
ret = devm_gpio_request_one(skt->socket.dev.parent,
skt->stat[i].gpio, GPIOF_IN,
skt->stat[i].name);
@@ -150,7 +173,11 @@
return ret;
}
- irq = gpio_to_irq(skt->stat[i].gpio);
+ skt->stat[i].desc = gpio_to_desc(skt->stat[i].gpio);
+ }
+
+ if (skt->stat[i].desc) {
+ int irq = gpiod_to_irq(skt->stat[i].desc);
if (i == SOC_STAT_RDY)
skt->socket.pci_irq = irq;
@@ -205,16 +232,16 @@
state.bvd2 = 1;
/* CD is active low by default */
- if (gpio_is_valid(skt->stat[SOC_STAT_CD].gpio))
- state.detect = !gpio_get_value(skt->stat[SOC_STAT_CD].gpio);
+ if (skt->stat[SOC_STAT_CD].desc)
+ state.detect = !gpiod_get_raw_value(skt->stat[SOC_STAT_CD].desc);
/* RDY and BVD are active high by default */
- if (gpio_is_valid(skt->stat[SOC_STAT_RDY].gpio))
- state.ready = !!gpio_get_value(skt->stat[SOC_STAT_RDY].gpio);
- if (gpio_is_valid(skt->stat[SOC_STAT_BVD1].gpio))
- state.bvd1 = !!gpio_get_value(skt->stat[SOC_STAT_BVD1].gpio);
- if (gpio_is_valid(skt->stat[SOC_STAT_BVD2].gpio))
- state.bvd2 = !!gpio_get_value(skt->stat[SOC_STAT_BVD2].gpio);
+ if (skt->stat[SOC_STAT_RDY].desc)
+ state.ready = !!gpiod_get_value(skt->stat[SOC_STAT_RDY].desc);
+ if (skt->stat[SOC_STAT_BVD1].desc)
+ state.bvd1 = !!gpiod_get_value(skt->stat[SOC_STAT_BVD1].desc);
+ if (skt->stat[SOC_STAT_BVD2].desc)
+ state.bvd2 = !!gpiod_get_value(skt->stat[SOC_STAT_BVD2].desc);
skt->ops->socket_state(skt, &state);