ARM: dts: imx: Fix "ERROR: code indent should use tabs where possible"
Fixed code indent tabs in respetcive imx23, imx51, imx53, imx6dl, imx6q
and imx6sx dtsi and dts files.
Signed-off-by: Jagan Teki <jagan@openedev.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index 440ee9a4..8e1543f 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -464,7 +464,7 @@
reg = <0x80038000 0x2000>;
status = "disabled";
};
- };
+ };
apbx@80040000 {
compatible = "simple-bus";
diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi
index 8fe8bee..92a03bc 100644
--- a/arch/arm/boot/dts/imx50.dtsi
+++ b/arch/arm/boot/dts/imx50.dtsi
@@ -103,8 +103,8 @@
reg = <0x50004000 0x4000>;
interrupts = <1>;
clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
- <&clks IMX5_CLK_DUMMY>,
- <&clks IMX5_CLK_ESDHC1_PER_GATE>;
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC1_PER_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
@@ -115,8 +115,8 @@
reg = <0x50008000 0x4000>;
interrupts = <2>;
clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
- <&clks IMX5_CLK_DUMMY>,
- <&clks IMX5_CLK_ESDHC2_PER_GATE>;
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC2_PER_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
@@ -127,7 +127,7 @@
reg = <0x5000c000 0x4000>;
interrupts = <33>;
clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
- <&clks IMX5_CLK_UART3_PER_GATE>;
+ <&clks IMX5_CLK_UART3_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -139,7 +139,7 @@
reg = <0x50010000 0x4000>;
interrupts = <36>;
clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
- <&clks IMX5_CLK_ECSPI1_PER_GATE>;
+ <&clks IMX5_CLK_ECSPI1_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -164,8 +164,8 @@
reg = <0x50020000 0x4000>;
interrupts = <3>;
clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
- <&clks IMX5_CLK_DUMMY>,
- <&clks IMX5_CLK_ESDHC3_PER_GATE>;
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC3_PER_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
@@ -176,8 +176,8 @@
reg = <0x50024000 0x4000>;
interrupts = <4>;
clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
- <&clks IMX5_CLK_DUMMY>,
- <&clks IMX5_CLK_ESDHC4_PER_GATE>;
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC4_PER_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
@@ -279,7 +279,7 @@
reg = <0x53fa0000 0x4000>;
interrupts = <39>;
clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
- <&clks IMX5_CLK_GPT_HF_GATE>;
+ <&clks IMX5_CLK_GPT_HF_GATE>;
clock-names = "ipg", "per";
};
@@ -298,7 +298,7 @@
compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
reg = <0x53fb4000 0x4000>;
clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
- <&clks IMX5_CLK_PWM1_HF_GATE>;
+ <&clks IMX5_CLK_PWM1_HF_GATE>;
clock-names = "ipg", "per";
interrupts = <61>;
};
@@ -308,7 +308,7 @@
compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
reg = <0x53fb8000 0x4000>;
clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
- <&clks IMX5_CLK_PWM2_HF_GATE>;
+ <&clks IMX5_CLK_PWM2_HF_GATE>;
clock-names = "ipg", "per";
interrupts = <94>;
};
@@ -318,7 +318,7 @@
reg = <0x53fbc000 0x4000>;
interrupts = <31>;
clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
- <&clks IMX5_CLK_UART1_PER_GATE>;
+ <&clks IMX5_CLK_UART1_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -328,7 +328,7 @@
reg = <0x53fc0000 0x4000>;
interrupts = <32>;
clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
- <&clks IMX5_CLK_UART2_PER_GATE>;
+ <&clks IMX5_CLK_UART2_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -383,7 +383,7 @@
reg = <0x53ff0000 0x4000>;
interrupts = <13>;
clocks = <&clks IMX5_CLK_UART4_IPG_GATE>,
- <&clks IMX5_CLK_UART4_PER_GATE>;
+ <&clks IMX5_CLK_UART4_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -401,7 +401,7 @@
reg = <0x63f90000 0x4000>;
interrupts = <86>;
clocks = <&clks IMX5_CLK_UART5_IPG_GATE>,
- <&clks IMX5_CLK_UART5_PER_GATE>;
+ <&clks IMX5_CLK_UART5_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -420,7 +420,7 @@
reg = <0x63fac000 0x4000>;
interrupts = <37>;
clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
- <&clks IMX5_CLK_ECSPI2_PER_GATE>;
+ <&clks IMX5_CLK_ECSPI2_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -430,7 +430,7 @@
reg = <0x63fb0000 0x4000>;
interrupts = <6>;
clocks = <&clks IMX5_CLK_SDMA_GATE>,
- <&clks IMX5_CLK_SDMA_GATE>;
+ <&clks IMX5_CLK_SDMA_GATE>;
clock-names = "ipg", "ahb";
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx50.bin";
};
@@ -442,7 +442,7 @@
reg = <0x63fc0000 0x4000>;
interrupts = <38>;
clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
- <&clks IMX5_CLK_CSPI_IPG_GATE>;
+ <&clks IMX5_CLK_CSPI_IPG_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -492,8 +492,8 @@
reg = <0x63fec000 0x4000>;
interrupts = <87>;
clocks = <&clks IMX5_CLK_FEC_GATE>,
- <&clks IMX5_CLK_FEC_GATE>,
- <&clks IMX5_CLK_FEC_GATE>;
+ <&clks IMX5_CLK_FEC_GATE>,
+ <&clks IMX5_CLK_FEC_GATE>;
clock-names = "ipg", "ahb", "ptp";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index f46fe9b..d8efdab 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -130,8 +130,8 @@
reg = <0x40000000 0x20000000>;
interrupts = <11 10>;
clocks = <&clks IMX5_CLK_IPU_GATE>,
- <&clks IMX5_CLK_IPU_DI0_GATE>,
- <&clks IMX5_CLK_IPU_DI1_GATE>;
+ <&clks IMX5_CLK_IPU_DI0_GATE>,
+ <&clks IMX5_CLK_IPU_DI1_GATE>;
clock-names = "bus", "di0", "di1";
resets = <&src 2>;
@@ -169,8 +169,8 @@
reg = <0x70004000 0x4000>;
interrupts = <1>;
clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
- <&clks IMX5_CLK_DUMMY>,
- <&clks IMX5_CLK_ESDHC1_PER_GATE>;
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC1_PER_GATE>;
clock-names = "ipg", "ahb", "per";
status = "disabled";
};
@@ -180,8 +180,8 @@
reg = <0x70008000 0x4000>;
interrupts = <2>;
clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
- <&clks IMX5_CLK_DUMMY>,
- <&clks IMX5_CLK_ESDHC2_PER_GATE>;
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC2_PER_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
@@ -192,7 +192,7 @@
reg = <0x7000c000 0x4000>;
interrupts = <33>;
clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
- <&clks IMX5_CLK_UART3_PER_GATE>;
+ <&clks IMX5_CLK_UART3_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -204,7 +204,7 @@
reg = <0x70010000 0x4000>;
interrupts = <36>;
clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
- <&clks IMX5_CLK_ECSPI1_PER_GATE>;
+ <&clks IMX5_CLK_ECSPI1_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -229,8 +229,8 @@
reg = <0x70020000 0x4000>;
interrupts = <3>;
clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
- <&clks IMX5_CLK_DUMMY>,
- <&clks IMX5_CLK_ESDHC3_PER_GATE>;
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC3_PER_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
@@ -241,8 +241,8 @@
reg = <0x70024000 0x4000>;
interrupts = <4>;
clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
- <&clks IMX5_CLK_DUMMY>,
- <&clks IMX5_CLK_ESDHC4_PER_GATE>;
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC4_PER_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
@@ -364,7 +364,7 @@
reg = <0x73fa0000 0x4000>;
interrupts = <39>;
clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
- <&clks IMX5_CLK_GPT_HF_GATE>;
+ <&clks IMX5_CLK_GPT_HF_GATE>;
clock-names = "ipg", "per";
};
@@ -378,7 +378,7 @@
compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
reg = <0x73fb4000 0x4000>;
clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
- <&clks IMX5_CLK_PWM1_HF_GATE>;
+ <&clks IMX5_CLK_PWM1_HF_GATE>;
clock-names = "ipg", "per";
interrupts = <61>;
};
@@ -388,7 +388,7 @@
compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
reg = <0x73fb8000 0x4000>;
clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
- <&clks IMX5_CLK_PWM2_HF_GATE>;
+ <&clks IMX5_CLK_PWM2_HF_GATE>;
clock-names = "ipg", "per";
interrupts = <94>;
};
@@ -398,7 +398,7 @@
reg = <0x73fbc000 0x4000>;
interrupts = <31>;
clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
- <&clks IMX5_CLK_UART1_PER_GATE>;
+ <&clks IMX5_CLK_UART1_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -408,7 +408,7 @@
reg = <0x73fc0000 0x4000>;
interrupts = <32>;
clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
- <&clks IMX5_CLK_UART2_PER_GATE>;
+ <&clks IMX5_CLK_UART2_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -456,7 +456,7 @@
reg = <0x83fac000 0x4000>;
interrupts = <37>;
clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
- <&clks IMX5_CLK_ECSPI2_PER_GATE>;
+ <&clks IMX5_CLK_ECSPI2_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -466,7 +466,7 @@
reg = <0x83fb0000 0x4000>;
interrupts = <6>;
clocks = <&clks IMX5_CLK_SDMA_GATE>,
- <&clks IMX5_CLK_SDMA_GATE>;
+ <&clks IMX5_CLK_SDMA_GATE>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
@@ -479,7 +479,7 @@
reg = <0x83fc0000 0x4000>;
interrupts = <38>;
clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
- <&clks IMX5_CLK_CSPI_IPG_GATE>;
+ <&clks IMX5_CLK_CSPI_IPG_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -582,8 +582,8 @@
reg = <0x83fec000 0x4000>;
interrupts = <87>;
clocks = <&clks IMX5_CLK_FEC_GATE>,
- <&clks IMX5_CLK_FEC_GATE>,
- <&clks IMX5_CLK_FEC_GATE>;
+ <&clks IMX5_CLK_FEC_GATE>,
+ <&clks IMX5_CLK_FEC_GATE>;
clock-names = "ipg", "ahb", "ptp";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 0777b41..88f9e09e 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -131,8 +131,8 @@
reg = <0x18000000 0x08000000>;
interrupts = <11 10>;
clocks = <&clks IMX5_CLK_IPU_GATE>,
- <&clks IMX5_CLK_IPU_DI0_GATE>,
- <&clks IMX5_CLK_IPU_DI1_GATE>;
+ <&clks IMX5_CLK_IPU_DI0_GATE>,
+ <&clks IMX5_CLK_IPU_DI1_GATE>;
clock-names = "bus", "di0", "di1";
resets = <&src 2>;
@@ -199,8 +199,8 @@
reg = <0x50004000 0x4000>;
interrupts = <1>;
clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
- <&clks IMX5_CLK_DUMMY>,
- <&clks IMX5_CLK_ESDHC1_PER_GATE>;
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC1_PER_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
@@ -211,8 +211,8 @@
reg = <0x50008000 0x4000>;
interrupts = <2>;
clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
- <&clks IMX5_CLK_DUMMY>,
- <&clks IMX5_CLK_ESDHC2_PER_GATE>;
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC2_PER_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
@@ -223,7 +223,7 @@
reg = <0x5000c000 0x4000>;
interrupts = <33>;
clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
- <&clks IMX5_CLK_UART3_PER_GATE>;
+ <&clks IMX5_CLK_UART3_PER_GATE>;
clock-names = "ipg", "per";
dmas = <&sdma 42 4 0>, <&sdma 43 4 0>;
dma-names = "rx", "tx";
@@ -237,7 +237,7 @@
reg = <0x50010000 0x4000>;
interrupts = <36>;
clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
- <&clks IMX5_CLK_ECSPI1_PER_GATE>;
+ <&clks IMX5_CLK_ECSPI1_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -264,8 +264,8 @@
reg = <0x50020000 0x4000>;
interrupts = <3>;
clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
- <&clks IMX5_CLK_DUMMY>,
- <&clks IMX5_CLK_ESDHC3_PER_GATE>;
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC3_PER_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
@@ -276,8 +276,8 @@
reg = <0x50024000 0x4000>;
interrupts = <4>;
clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
- <&clks IMX5_CLK_DUMMY>,
- <&clks IMX5_CLK_ESDHC4_PER_GATE>;
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC4_PER_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
@@ -419,7 +419,7 @@
reg = <0x53fa0000 0x4000>;
interrupts = <39>;
clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
- <&clks IMX5_CLK_GPT_HF_GATE>;
+ <&clks IMX5_CLK_GPT_HF_GATE>;
clock-names = "ipg", "per";
};
@@ -440,11 +440,11 @@
reg = <0x53fa8008 0x4>;
gpr = <&gpr>;
clocks = <&clks IMX5_CLK_LDB_DI0_SEL>,
- <&clks IMX5_CLK_LDB_DI1_SEL>,
- <&clks IMX5_CLK_IPU_DI0_SEL>,
- <&clks IMX5_CLK_IPU_DI1_SEL>,
- <&clks IMX5_CLK_LDB_DI0_GATE>,
- <&clks IMX5_CLK_LDB_DI1_GATE>;
+ <&clks IMX5_CLK_LDB_DI1_SEL>,
+ <&clks IMX5_CLK_IPU_DI0_SEL>,
+ <&clks IMX5_CLK_IPU_DI1_SEL>,
+ <&clks IMX5_CLK_LDB_DI0_GATE>,
+ <&clks IMX5_CLK_LDB_DI1_GATE>;
clock-names = "di0_pll", "di1_pll",
"di0_sel", "di1_sel",
"di0", "di1";
@@ -486,7 +486,7 @@
compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
reg = <0x53fb4000 0x4000>;
clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
- <&clks IMX5_CLK_PWM1_HF_GATE>;
+ <&clks IMX5_CLK_PWM1_HF_GATE>;
clock-names = "ipg", "per";
interrupts = <61>;
};
@@ -496,7 +496,7 @@
compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
reg = <0x53fb8000 0x4000>;
clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
- <&clks IMX5_CLK_PWM2_HF_GATE>;
+ <&clks IMX5_CLK_PWM2_HF_GATE>;
clock-names = "ipg", "per";
interrupts = <94>;
};
@@ -506,7 +506,7 @@
reg = <0x53fbc000 0x4000>;
interrupts = <31>;
clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
- <&clks IMX5_CLK_UART1_PER_GATE>;
+ <&clks IMX5_CLK_UART1_PER_GATE>;
clock-names = "ipg", "per";
dmas = <&sdma 18 4 0>, <&sdma 19 4 0>;
dma-names = "rx", "tx";
@@ -518,7 +518,7 @@
reg = <0x53fc0000 0x4000>;
interrupts = <32>;
clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
- <&clks IMX5_CLK_UART2_PER_GATE>;
+ <&clks IMX5_CLK_UART2_PER_GATE>;
clock-names = "ipg", "per";
dmas = <&sdma 12 4 0>, <&sdma 13 4 0>;
dma-names = "rx", "tx";
@@ -530,7 +530,7 @@
reg = <0x53fc8000 0x4000>;
interrupts = <82>;
clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>,
- <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
+ <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -540,7 +540,7 @@
reg = <0x53fcc000 0x4000>;
interrupts = <83>;
clocks = <&clks IMX5_CLK_CAN2_IPG_GATE>,
- <&clks IMX5_CLK_CAN2_SERIAL_GATE>;
+ <&clks IMX5_CLK_CAN2_SERIAL_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -603,7 +603,7 @@
reg = <0x53ff0000 0x4000>;
interrupts = <13>;
clocks = <&clks IMX5_CLK_UART4_IPG_GATE>,
- <&clks IMX5_CLK_UART4_PER_GATE>;
+ <&clks IMX5_CLK_UART4_PER_GATE>;
clock-names = "ipg", "per";
dmas = <&sdma 2 4 0>, <&sdma 3 4 0>;
dma-names = "rx", "tx";
@@ -635,7 +635,7 @@
reg = <0x63f90000 0x4000>;
interrupts = <86>;
clocks = <&clks IMX5_CLK_UART5_IPG_GATE>,
- <&clks IMX5_CLK_UART5_PER_GATE>;
+ <&clks IMX5_CLK_UART5_PER_GATE>;
clock-names = "ipg", "per";
dmas = <&sdma 16 4 0>, <&sdma 17 4 0>;
dma-names = "rx", "tx";
@@ -656,7 +656,7 @@
reg = <0x63fac000 0x4000>;
interrupts = <37>;
clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
- <&clks IMX5_CLK_ECSPI2_PER_GATE>;
+ <&clks IMX5_CLK_ECSPI2_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -666,7 +666,7 @@
reg = <0x63fb0000 0x4000>;
interrupts = <6>;
clocks = <&clks IMX5_CLK_SDMA_GATE>,
- <&clks IMX5_CLK_SDMA_GATE>;
+ <&clks IMX5_CLK_SDMA_GATE>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
@@ -679,7 +679,7 @@
reg = <0x63fc0000 0x4000>;
interrupts = <38>;
clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
- <&clks IMX5_CLK_CSPI_IPG_GATE>;
+ <&clks IMX5_CLK_CSPI_IPG_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -755,8 +755,8 @@
reg = <0x63fec000 0x4000>;
interrupts = <87>;
clocks = <&clks IMX5_CLK_FEC_GATE>,
- <&clks IMX5_CLK_FEC_GATE>,
- <&clks IMX5_CLK_FEC_GATE>;
+ <&clks IMX5_CLK_FEC_GATE>,
+ <&clks IMX5_CLK_FEC_GATE>;
clock-names = "ipg", "ahb", "ptp";
status = "disabled";
};
@@ -766,7 +766,7 @@
reg = <0x63ff0000 0x1000>;
interrupts = <92>;
clocks = <&clks IMX5_CLK_TVE_GATE>,
- <&clks IMX5_CLK_IPU_DI1_SEL>;
+ <&clks IMX5_CLK_IPU_DI1_SEL>;
clock-names = "tve", "di_sel";
status = "disabled";
@@ -782,7 +782,7 @@
reg = <0x63ff4000 0x1000>;
interrupts = <9>;
clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>,
- <&clks IMX5_CLK_VPU_GATE>;
+ <&clks IMX5_CLK_VPU_GATE>;
clock-names = "per", "ahb";
resets = <&src 1>;
iram = <&ocram>;
@@ -793,7 +793,7 @@
reg = <0x63ff8000 0x4000>;
interrupts = <19 20>;
clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>,
- <&clks IMX5_CLK_SAHARA_IPG_GATE>;
+ <&clks IMX5_CLK_SAHARA_IPG_GATE>;
clock-names = "ipg", "ahb";
};
};
diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index 75d7343..2cb7282 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -390,7 +390,7 @@
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 /* AR8035 pin strapping: MODE#3: pull up */
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x130b0 /* AR8035 pin strapping: MODE#0: pull down */
MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 /* GPIO16 -> AR8035 25MHz */
- MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x130b0 /* RGMII_nRST */
+ MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x130b0 /* RGMII_nRST */
MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x180b0 /* AR8035 interrupt */
MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
>;
diff --git a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
index 063fe75..aac42ac 100644
--- a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
+++ b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
@@ -105,7 +105,7 @@
pixelclk-active = <1>;
};
};
- };
+ };
};
&can1 {
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts
index b7a7284..d1f1298 100644
--- a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts
+++ b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts
@@ -199,7 +199,7 @@
pixelclk-active = <0>;
};
};
- };
+ };
};
&ipu1_di0_disp0 {
diff --git a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts
index c139ac0..1f47713 100644
--- a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts
+++ b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts
@@ -23,5 +23,5 @@
};
&sata {
- status = "okay";
+ status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
index 65e95ae..71746ed 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
@@ -105,7 +105,7 @@
pixelclk-active = <1>;
};
};
- };
+ };
};
&can1 {
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010.dts b/arch/arm/boot/dts/imx6q-tx6q-1010.dts
index 20cd0e7..f9cd21a 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-1010.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1010.dts
@@ -199,7 +199,7 @@
pixelclk-active = <0>;
};
};
- };
+ };
};
&ipu1_di0_disp0 {
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts
index 9ed243b..959ff3fb 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts
@@ -105,7 +105,7 @@
pixelclk-active = <1>;
};
};
- };
+ };
};
&can1 {
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020.dts b/arch/arm/boot/dts/imx6q-tx6q-1020.dts
index 347b531..b49133d 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-1020.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1020.dts
@@ -199,7 +199,7 @@
pixelclk-active = <0>;
};
};
- };
+ };
};
&ds1339 {
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi
index 9d70cfd..7327bcd 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi
@@ -192,10 +192,10 @@
};
&i2c4 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c4>;
- status = "okay";
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ status = "okay";
codec: wm8962@1a {
compatible = "wlf,wm8962";
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 9526c38..bd9fe67 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -858,7 +858,7 @@
fsl,num-tx-queues=<3>;
fsl,num-rx-queues=<3>;
status = "disabled";
- };
+ };
mlb: mlb@0218c000 {
reg = <0x0218c000 0x4000>;
@@ -1181,7 +1181,7 @@
fsl,adck-max-frequency = <30000000>, <40000000>,
<20000000>;
status = "disabled";
- };
+ };
adc2: adc@02284000 {
compatible = "fsl,imx6sx-adc", "fsl,vf610-adc";
@@ -1192,7 +1192,7 @@
fsl,adck-max-frequency = <30000000>, <40000000>,
<20000000>;
status = "disabled";
- };
+ };
wdog3: wdog@02288000 {
compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";