ARM: dts: imx: Fix "ERROR: code indent should use tabs where possible"
Fixed code indent tabs in respetcive imx23, imx51, imx53, imx6dl, imx6q
and imx6sx dtsi and dts files.
Signed-off-by: Jagan Teki <jagan@openedev.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index f46fe9b..d8efdab 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -130,8 +130,8 @@
reg = <0x40000000 0x20000000>;
interrupts = <11 10>;
clocks = <&clks IMX5_CLK_IPU_GATE>,
- <&clks IMX5_CLK_IPU_DI0_GATE>,
- <&clks IMX5_CLK_IPU_DI1_GATE>;
+ <&clks IMX5_CLK_IPU_DI0_GATE>,
+ <&clks IMX5_CLK_IPU_DI1_GATE>;
clock-names = "bus", "di0", "di1";
resets = <&src 2>;
@@ -169,8 +169,8 @@
reg = <0x70004000 0x4000>;
interrupts = <1>;
clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
- <&clks IMX5_CLK_DUMMY>,
- <&clks IMX5_CLK_ESDHC1_PER_GATE>;
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC1_PER_GATE>;
clock-names = "ipg", "ahb", "per";
status = "disabled";
};
@@ -180,8 +180,8 @@
reg = <0x70008000 0x4000>;
interrupts = <2>;
clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
- <&clks IMX5_CLK_DUMMY>,
- <&clks IMX5_CLK_ESDHC2_PER_GATE>;
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC2_PER_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
@@ -192,7 +192,7 @@
reg = <0x7000c000 0x4000>;
interrupts = <33>;
clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
- <&clks IMX5_CLK_UART3_PER_GATE>;
+ <&clks IMX5_CLK_UART3_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -204,7 +204,7 @@
reg = <0x70010000 0x4000>;
interrupts = <36>;
clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
- <&clks IMX5_CLK_ECSPI1_PER_GATE>;
+ <&clks IMX5_CLK_ECSPI1_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -229,8 +229,8 @@
reg = <0x70020000 0x4000>;
interrupts = <3>;
clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
- <&clks IMX5_CLK_DUMMY>,
- <&clks IMX5_CLK_ESDHC3_PER_GATE>;
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC3_PER_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
@@ -241,8 +241,8 @@
reg = <0x70024000 0x4000>;
interrupts = <4>;
clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
- <&clks IMX5_CLK_DUMMY>,
- <&clks IMX5_CLK_ESDHC4_PER_GATE>;
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC4_PER_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
@@ -364,7 +364,7 @@
reg = <0x73fa0000 0x4000>;
interrupts = <39>;
clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
- <&clks IMX5_CLK_GPT_HF_GATE>;
+ <&clks IMX5_CLK_GPT_HF_GATE>;
clock-names = "ipg", "per";
};
@@ -378,7 +378,7 @@
compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
reg = <0x73fb4000 0x4000>;
clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
- <&clks IMX5_CLK_PWM1_HF_GATE>;
+ <&clks IMX5_CLK_PWM1_HF_GATE>;
clock-names = "ipg", "per";
interrupts = <61>;
};
@@ -388,7 +388,7 @@
compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
reg = <0x73fb8000 0x4000>;
clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
- <&clks IMX5_CLK_PWM2_HF_GATE>;
+ <&clks IMX5_CLK_PWM2_HF_GATE>;
clock-names = "ipg", "per";
interrupts = <94>;
};
@@ -398,7 +398,7 @@
reg = <0x73fbc000 0x4000>;
interrupts = <31>;
clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
- <&clks IMX5_CLK_UART1_PER_GATE>;
+ <&clks IMX5_CLK_UART1_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -408,7 +408,7 @@
reg = <0x73fc0000 0x4000>;
interrupts = <32>;
clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
- <&clks IMX5_CLK_UART2_PER_GATE>;
+ <&clks IMX5_CLK_UART2_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -456,7 +456,7 @@
reg = <0x83fac000 0x4000>;
interrupts = <37>;
clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
- <&clks IMX5_CLK_ECSPI2_PER_GATE>;
+ <&clks IMX5_CLK_ECSPI2_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -466,7 +466,7 @@
reg = <0x83fb0000 0x4000>;
interrupts = <6>;
clocks = <&clks IMX5_CLK_SDMA_GATE>,
- <&clks IMX5_CLK_SDMA_GATE>;
+ <&clks IMX5_CLK_SDMA_GATE>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
@@ -479,7 +479,7 @@
reg = <0x83fc0000 0x4000>;
interrupts = <38>;
clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
- <&clks IMX5_CLK_CSPI_IPG_GATE>;
+ <&clks IMX5_CLK_CSPI_IPG_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -582,8 +582,8 @@
reg = <0x83fec000 0x4000>;
interrupts = <87>;
clocks = <&clks IMX5_CLK_FEC_GATE>,
- <&clks IMX5_CLK_FEC_GATE>,
- <&clks IMX5_CLK_FEC_GATE>;
+ <&clks IMX5_CLK_FEC_GATE>,
+ <&clks IMX5_CLK_FEC_GATE>;
clock-names = "ipg", "ahb", "ptp";
status = "disabled";
};