PCI: iproc: Allow multiple devices except on PAXC
Commit 943ebae781f5 ("PCI: iproc: Add PAXC interface support") only allowed
device 0, which is a regression on BCMA-based platforms.
All systems support only one device, a Root Port at 00:00.0, on the root
bus. PAXC-based systems support only the Root Port (00:00.0) and a single
device (with multiple functions) below it, e.g., 01:00.0, 01:00.1, etc.
Non-PAXC systems support arbitrary devices below the Root Port.
[bhelgaas: changelog, fold in removal of MAX_NUM_PAXC_PF check]
Fixes: 943ebae781f5 ("PCI: iproc: Add PAXC interface support")
Reported-by: Rafal Milecki <zajec5@gmail.com>
Signed-off-by: Ray Jui <rjui@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>diff --git a/drivers/pci/host/pcie-iproc.c b/drivers/pci/host/pcie-iproc.c
index 5816bce..a576aee 100644
--- a/drivers/pci/host/pcie-iproc.c
+++ b/drivers/pci/host/pcie-iproc.c
@@ -64,7 +64,6 @@
#define OARR_SIZE_CFG BIT(OARR_SIZE_CFG_SHIFT)
#define MAX_NUM_OB_WINDOWS 2
-#define MAX_NUM_PAXC_PF 4
#define IPROC_PCIE_REG_INVALID 0xffff
@@ -170,20 +169,6 @@
writel(val, pcie->base + offset + (window * 8));
}
-static inline bool iproc_pcie_device_is_valid(struct iproc_pcie *pcie,
- unsigned int slot,
- unsigned int fn)
-{
- if (slot > 0)
- return false;
-
- /* PAXC can only support limited number of functions */
- if (pcie->type == IPROC_PCIE_PAXC && fn >= MAX_NUM_PAXC_PF)
- return false;
-
- return true;
-}
-
/**
* Note access to the configuration registers are protected at the higher layer
* by 'pci_lock' in drivers/pci/access.c
@@ -199,11 +184,11 @@
u32 val;
u16 offset;
- if (!iproc_pcie_device_is_valid(pcie, slot, fn))
- return NULL;
-
/* root complex access */
if (busno == 0) {
+ if (slot > 0 || fn > 0)
+ return NULL;
+
iproc_pcie_write_reg(pcie, IPROC_PCIE_CFG_IND_ADDR,
where & CFG_IND_ADDR_MASK);
offset = iproc_pcie_reg_offset(pcie, IPROC_PCIE_CFG_IND_DATA);
@@ -213,6 +198,14 @@
return (pcie->base + offset);
}
+ /*
+ * PAXC is connected to an internally emulated EP within the SoC. It
+ * allows only one device.
+ */
+ if (pcie->type == IPROC_PCIE_PAXC)
+ if (slot > 0)
+ return NULL;
+
/* EP device access */
val = (busno << CFG_ADDR_BUS_NUM_SHIFT) |
(slot << CFG_ADDR_DEV_NUM_SHIFT) |