| /* |
| * V4L2 Driver for SuperH Mobile CEU interface |
| * |
| * Copyright (C) 2008 Magnus Damm |
| * |
| * Based on V4L2 Driver for PXA camera host - "pxa_camera.c", |
| * |
| * Copyright (C) 2006, Sascha Hauer, Pengutronix |
| * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/io.h> |
| #include <linux/delay.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/errno.h> |
| #include <linux/fs.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/mm.h> |
| #include <linux/moduleparam.h> |
| #include <linux/time.h> |
| #include <linux/version.h> |
| #include <linux/device.h> |
| #include <linux/platform_device.h> |
| #include <linux/videodev2.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/sched.h> |
| |
| #include <media/v4l2-common.h> |
| #include <media/v4l2-dev.h> |
| #include <media/soc_camera.h> |
| #include <media/sh_mobile_ceu.h> |
| #include <media/videobuf-dma-contig.h> |
| |
| /* register offsets for sh7722 / sh7723 */ |
| |
| #define CAPSR 0x00 /* Capture start register */ |
| #define CAPCR 0x04 /* Capture control register */ |
| #define CAMCR 0x08 /* Capture interface control register */ |
| #define CMCYR 0x0c /* Capture interface cycle register */ |
| #define CAMOR 0x10 /* Capture interface offset register */ |
| #define CAPWR 0x14 /* Capture interface width register */ |
| #define CAIFR 0x18 /* Capture interface input format register */ |
| #define CSTCR 0x20 /* Camera strobe control register (<= sh7722) */ |
| #define CSECR 0x24 /* Camera strobe emission count register (<= sh7722) */ |
| #define CRCNTR 0x28 /* CEU register control register */ |
| #define CRCMPR 0x2c /* CEU register forcible control register */ |
| #define CFLCR 0x30 /* Capture filter control register */ |
| #define CFSZR 0x34 /* Capture filter size clip register */ |
| #define CDWDR 0x38 /* Capture destination width register */ |
| #define CDAYR 0x3c /* Capture data address Y register */ |
| #define CDACR 0x40 /* Capture data address C register */ |
| #define CDBYR 0x44 /* Capture data bottom-field address Y register */ |
| #define CDBCR 0x48 /* Capture data bottom-field address C register */ |
| #define CBDSR 0x4c /* Capture bundle destination size register */ |
| #define CFWCR 0x5c /* Firewall operation control register */ |
| #define CLFCR 0x60 /* Capture low-pass filter control register */ |
| #define CDOCR 0x64 /* Capture data output control register */ |
| #define CDDCR 0x68 /* Capture data complexity level register */ |
| #define CDDAR 0x6c /* Capture data complexity level address register */ |
| #define CEIER 0x70 /* Capture event interrupt enable register */ |
| #define CETCR 0x74 /* Capture event flag clear register */ |
| #define CSTSR 0x7c /* Capture status register */ |
| #define CSRTR 0x80 /* Capture software reset register */ |
| #define CDSSR 0x84 /* Capture data size register */ |
| #define CDAYR2 0x90 /* Capture data address Y register 2 */ |
| #define CDACR2 0x94 /* Capture data address C register 2 */ |
| #define CDBYR2 0x98 /* Capture data bottom-field address Y register 2 */ |
| #define CDBCR2 0x9c /* Capture data bottom-field address C register 2 */ |
| |
| #undef DEBUG_GEOMETRY |
| #ifdef DEBUG_GEOMETRY |
| #define dev_geo dev_info |
| #else |
| #define dev_geo dev_dbg |
| #endif |
| |
| /* per video frame buffer */ |
| struct sh_mobile_ceu_buffer { |
| struct videobuf_buffer vb; /* v4l buffer must be first */ |
| const struct soc_camera_data_format *fmt; |
| }; |
| |
| struct sh_mobile_ceu_dev { |
| struct soc_camera_host ici; |
| struct soc_camera_device *icd; |
| |
| unsigned int irq; |
| void __iomem *base; |
| unsigned long video_limit; |
| |
| /* lock used to protect videobuf */ |
| spinlock_t lock; |
| struct list_head capture; |
| struct videobuf_buffer *active; |
| |
| struct sh_mobile_ceu_info *pdata; |
| |
| u32 cflcr; |
| |
| unsigned int is_interlaced:1; |
| unsigned int image_mode:1; |
| unsigned int is_16bit:1; |
| }; |
| |
| struct sh_mobile_ceu_cam { |
| struct v4l2_rect ceu_rect; |
| unsigned int cam_width; |
| unsigned int cam_height; |
| const struct soc_camera_data_format *extra_fmt; |
| const struct soc_camera_data_format *camera_fmt; |
| }; |
| |
| static unsigned long make_bus_param(struct sh_mobile_ceu_dev *pcdev) |
| { |
| unsigned long flags; |
| |
| flags = SOCAM_MASTER | |
| SOCAM_PCLK_SAMPLE_RISING | |
| SOCAM_HSYNC_ACTIVE_HIGH | |
| SOCAM_HSYNC_ACTIVE_LOW | |
| SOCAM_VSYNC_ACTIVE_HIGH | |
| SOCAM_VSYNC_ACTIVE_LOW | |
| SOCAM_DATA_ACTIVE_HIGH; |
| |
| if (pcdev->pdata->flags & SH_CEU_FLAG_USE_8BIT_BUS) |
| flags |= SOCAM_DATAWIDTH_8; |
| |
| if (pcdev->pdata->flags & SH_CEU_FLAG_USE_16BIT_BUS) |
| flags |= SOCAM_DATAWIDTH_16; |
| |
| if (flags & SOCAM_DATAWIDTH_MASK) |
| return flags; |
| |
| return 0; |
| } |
| |
| static void ceu_write(struct sh_mobile_ceu_dev *priv, |
| unsigned long reg_offs, u32 data) |
| { |
| iowrite32(data, priv->base + reg_offs); |
| } |
| |
| static u32 ceu_read(struct sh_mobile_ceu_dev *priv, unsigned long reg_offs) |
| { |
| return ioread32(priv->base + reg_offs); |
| } |
| |
| static int sh_mobile_ceu_soft_reset(struct sh_mobile_ceu_dev *pcdev) |
| { |
| int i, success = 0; |
| struct soc_camera_device *icd = pcdev->icd; |
| |
| ceu_write(pcdev, CAPSR, 1 << 16); /* reset */ |
| |
| /* wait CSTSR.CPTON bit */ |
| for (i = 0; i < 1000; i++) { |
| if (!(ceu_read(pcdev, CSTSR) & 1)) { |
| success++; |
| break; |
| } |
| udelay(1); |
| } |
| |
| /* wait CAPSR.CPKIL bit */ |
| for (i = 0; i < 1000; i++) { |
| if (!(ceu_read(pcdev, CAPSR) & (1 << 16))) { |
| success++; |
| break; |
| } |
| udelay(1); |
| } |
| |
| |
| if (2 != success) { |
| dev_warn(&icd->dev, "soft reset time out\n"); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Videobuf operations |
| */ |
| static int sh_mobile_ceu_videobuf_setup(struct videobuf_queue *vq, |
| unsigned int *count, |
| unsigned int *size) |
| { |
| struct soc_camera_device *icd = vq->priv_data; |
| struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); |
| struct sh_mobile_ceu_dev *pcdev = ici->priv; |
| int bytes_per_pixel = (icd->current_fmt->depth + 7) >> 3; |
| |
| *size = PAGE_ALIGN(icd->user_width * icd->user_height * |
| bytes_per_pixel); |
| |
| if (0 == *count) |
| *count = 2; |
| |
| if (pcdev->video_limit) { |
| while (*size * *count > pcdev->video_limit) |
| (*count)--; |
| } |
| |
| dev_dbg(icd->dev.parent, "count=%d, size=%d\n", *count, *size); |
| |
| return 0; |
| } |
| |
| static void free_buffer(struct videobuf_queue *vq, |
| struct sh_mobile_ceu_buffer *buf) |
| { |
| struct soc_camera_device *icd = vq->priv_data; |
| struct device *dev = icd->dev.parent; |
| |
| dev_dbg(dev, "%s (vb=0x%p) 0x%08lx %zd\n", __func__, |
| &buf->vb, buf->vb.baddr, buf->vb.bsize); |
| |
| if (in_interrupt()) |
| BUG(); |
| |
| videobuf_waiton(&buf->vb, 0, 0); |
| videobuf_dma_contig_free(vq, &buf->vb); |
| dev_dbg(dev, "%s freed\n", __func__); |
| buf->vb.state = VIDEOBUF_NEEDS_INIT; |
| } |
| |
| #define CEU_CETCR_MAGIC 0x0317f313 /* acknowledge magical interrupt sources */ |
| #define CEU_CETCR_IGRW (1 << 4) /* prohibited register access interrupt bit */ |
| #define CEU_CEIER_CPEIE (1 << 0) /* one-frame capture end interrupt */ |
| #define CEU_CEIER_VBP (1 << 20) /* vbp error */ |
| #define CEU_CAPCR_CTNCP (1 << 16) /* continuous capture mode (if set) */ |
| #define CEU_CEIER_MASK (CEU_CEIER_CPEIE | CEU_CEIER_VBP) |
| |
| |
| /* |
| * return value doesn't reflex the success/failure to queue the new buffer, |
| * but rather the status of the previous buffer. |
| */ |
| static int sh_mobile_ceu_capture(struct sh_mobile_ceu_dev *pcdev) |
| { |
| struct soc_camera_device *icd = pcdev->icd; |
| dma_addr_t phys_addr_top, phys_addr_bottom; |
| u32 status; |
| int ret = 0; |
| |
| /* The hardware is _very_ picky about this sequence. Especially |
| * the CEU_CETCR_MAGIC value. It seems like we need to acknowledge |
| * several not-so-well documented interrupt sources in CETCR. |
| */ |
| ceu_write(pcdev, CEIER, ceu_read(pcdev, CEIER) & ~CEU_CEIER_MASK); |
| status = ceu_read(pcdev, CETCR); |
| ceu_write(pcdev, CETCR, ~status & CEU_CETCR_MAGIC); |
| ceu_write(pcdev, CEIER, ceu_read(pcdev, CEIER) | CEU_CEIER_MASK); |
| ceu_write(pcdev, CAPCR, ceu_read(pcdev, CAPCR) & ~CEU_CAPCR_CTNCP); |
| ceu_write(pcdev, CETCR, CEU_CETCR_MAGIC ^ CEU_CETCR_IGRW); |
| |
| /* |
| * When a VBP interrupt occurs, a capture end interrupt does not occur |
| * and the image of that frame is not captured correctly. So, soft reset |
| * is needed here. |
| */ |
| if (status & CEU_CEIER_VBP) { |
| sh_mobile_ceu_soft_reset(pcdev); |
| ret = -EIO; |
| } |
| |
| if (!pcdev->active) |
| return ret; |
| |
| phys_addr_top = videobuf_to_dma_contig(pcdev->active); |
| ceu_write(pcdev, CDAYR, phys_addr_top); |
| if (pcdev->is_interlaced) { |
| phys_addr_bottom = phys_addr_top + icd->user_width; |
| ceu_write(pcdev, CDBYR, phys_addr_bottom); |
| } |
| |
| switch (icd->current_fmt->fourcc) { |
| case V4L2_PIX_FMT_NV12: |
| case V4L2_PIX_FMT_NV21: |
| case V4L2_PIX_FMT_NV16: |
| case V4L2_PIX_FMT_NV61: |
| phys_addr_top += icd->user_width * |
| icd->user_height; |
| ceu_write(pcdev, CDACR, phys_addr_top); |
| if (pcdev->is_interlaced) { |
| phys_addr_bottom = phys_addr_top + |
| icd->user_width; |
| ceu_write(pcdev, CDBCR, phys_addr_bottom); |
| } |
| } |
| |
| pcdev->active->state = VIDEOBUF_ACTIVE; |
| ceu_write(pcdev, CAPSR, 0x1); /* start capture */ |
| |
| return ret; |
| } |
| |
| static int sh_mobile_ceu_videobuf_prepare(struct videobuf_queue *vq, |
| struct videobuf_buffer *vb, |
| enum v4l2_field field) |
| { |
| struct soc_camera_device *icd = vq->priv_data; |
| struct sh_mobile_ceu_buffer *buf; |
| int ret; |
| |
| buf = container_of(vb, struct sh_mobile_ceu_buffer, vb); |
| |
| dev_dbg(icd->dev.parent, "%s (vb=0x%p) 0x%08lx %zd\n", __func__, |
| vb, vb->baddr, vb->bsize); |
| |
| /* Added list head initialization on alloc */ |
| WARN_ON(!list_empty(&vb->queue)); |
| |
| #ifdef DEBUG |
| /* This can be useful if you want to see if we actually fill |
| * the buffer with something */ |
| memset((void *)vb->baddr, 0xaa, vb->bsize); |
| #endif |
| |
| BUG_ON(NULL == icd->current_fmt); |
| |
| if (buf->fmt != icd->current_fmt || |
| vb->width != icd->user_width || |
| vb->height != icd->user_height || |
| vb->field != field) { |
| buf->fmt = icd->current_fmt; |
| vb->width = icd->user_width; |
| vb->height = icd->user_height; |
| vb->field = field; |
| vb->state = VIDEOBUF_NEEDS_INIT; |
| } |
| |
| vb->size = vb->width * vb->height * ((buf->fmt->depth + 7) >> 3); |
| if (0 != vb->baddr && vb->bsize < vb->size) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| if (vb->state == VIDEOBUF_NEEDS_INIT) { |
| ret = videobuf_iolock(vq, vb, NULL); |
| if (ret) |
| goto fail; |
| vb->state = VIDEOBUF_PREPARED; |
| } |
| |
| return 0; |
| fail: |
| free_buffer(vq, buf); |
| out: |
| return ret; |
| } |
| |
| /* Called under spinlock_irqsave(&pcdev->lock, ...) */ |
| static void sh_mobile_ceu_videobuf_queue(struct videobuf_queue *vq, |
| struct videobuf_buffer *vb) |
| { |
| struct soc_camera_device *icd = vq->priv_data; |
| struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); |
| struct sh_mobile_ceu_dev *pcdev = ici->priv; |
| |
| dev_dbg(icd->dev.parent, "%s (vb=0x%p) 0x%08lx %zd\n", __func__, |
| vb, vb->baddr, vb->bsize); |
| |
| vb->state = VIDEOBUF_QUEUED; |
| list_add_tail(&vb->queue, &pcdev->capture); |
| |
| if (!pcdev->active) { |
| /* |
| * Because there were no active buffer at this moment, |
| * we are not interested in the return value of |
| * sh_mobile_ceu_capture here. |
| */ |
| pcdev->active = vb; |
| sh_mobile_ceu_capture(pcdev); |
| } |
| } |
| |
| static void sh_mobile_ceu_videobuf_release(struct videobuf_queue *vq, |
| struct videobuf_buffer *vb) |
| { |
| struct soc_camera_device *icd = vq->priv_data; |
| struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); |
| struct sh_mobile_ceu_dev *pcdev = ici->priv; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&pcdev->lock, flags); |
| |
| if (pcdev->active == vb) { |
| /* disable capture (release DMA buffer), reset */ |
| ceu_write(pcdev, CAPSR, 1 << 16); |
| pcdev->active = NULL; |
| } |
| |
| if ((vb->state == VIDEOBUF_ACTIVE || vb->state == VIDEOBUF_QUEUED) && |
| !list_empty(&vb->queue)) { |
| vb->state = VIDEOBUF_ERROR; |
| list_del_init(&vb->queue); |
| } |
| |
| spin_unlock_irqrestore(&pcdev->lock, flags); |
| |
| free_buffer(vq, container_of(vb, struct sh_mobile_ceu_buffer, vb)); |
| } |
| |
| static struct videobuf_queue_ops sh_mobile_ceu_videobuf_ops = { |
| .buf_setup = sh_mobile_ceu_videobuf_setup, |
| .buf_prepare = sh_mobile_ceu_videobuf_prepare, |
| .buf_queue = sh_mobile_ceu_videobuf_queue, |
| .buf_release = sh_mobile_ceu_videobuf_release, |
| }; |
| |
| static irqreturn_t sh_mobile_ceu_irq(int irq, void *data) |
| { |
| struct sh_mobile_ceu_dev *pcdev = data; |
| struct videobuf_buffer *vb; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&pcdev->lock, flags); |
| |
| vb = pcdev->active; |
| if (!vb) |
| /* Stale interrupt from a released buffer */ |
| goto out; |
| |
| list_del_init(&vb->queue); |
| |
| if (!list_empty(&pcdev->capture)) |
| pcdev->active = list_entry(pcdev->capture.next, |
| struct videobuf_buffer, queue); |
| else |
| pcdev->active = NULL; |
| |
| vb->state = (sh_mobile_ceu_capture(pcdev) < 0) ? |
| VIDEOBUF_ERROR : VIDEOBUF_DONE; |
| do_gettimeofday(&vb->ts); |
| vb->field_count++; |
| wake_up(&vb->done); |
| |
| out: |
| spin_unlock_irqrestore(&pcdev->lock, flags); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* Called with .video_lock held */ |
| static int sh_mobile_ceu_add_device(struct soc_camera_device *icd) |
| { |
| struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); |
| struct sh_mobile_ceu_dev *pcdev = ici->priv; |
| |
| if (pcdev->icd) |
| return -EBUSY; |
| |
| dev_info(icd->dev.parent, |
| "SuperH Mobile CEU driver attached to camera %d\n", |
| icd->devnum); |
| |
| pm_runtime_get_sync(ici->v4l2_dev.dev); |
| |
| pcdev->icd = icd; |
| |
| return sh_mobile_ceu_soft_reset(pcdev); |
| } |
| |
| /* Called with .video_lock held */ |
| static void sh_mobile_ceu_remove_device(struct soc_camera_device *icd) |
| { |
| struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); |
| struct sh_mobile_ceu_dev *pcdev = ici->priv; |
| unsigned long flags; |
| |
| BUG_ON(icd != pcdev->icd); |
| |
| /* disable capture, disable interrupts */ |
| ceu_write(pcdev, CEIER, 0); |
| sh_mobile_ceu_soft_reset(pcdev); |
| |
| /* make sure active buffer is canceled */ |
| spin_lock_irqsave(&pcdev->lock, flags); |
| if (pcdev->active) { |
| list_del(&pcdev->active->queue); |
| pcdev->active->state = VIDEOBUF_ERROR; |
| wake_up_all(&pcdev->active->done); |
| pcdev->active = NULL; |
| } |
| spin_unlock_irqrestore(&pcdev->lock, flags); |
| |
| pm_runtime_put_sync(ici->v4l2_dev.dev); |
| |
| dev_info(icd->dev.parent, |
| "SuperH Mobile CEU driver detached from camera %d\n", |
| icd->devnum); |
| |
| pcdev->icd = NULL; |
| } |
| |
| /* |
| * See chapter 29.4.12 "Capture Filter Control Register (CFLCR)" |
| * in SH7722 Hardware Manual |
| */ |
| static unsigned int size_dst(unsigned int src, unsigned int scale) |
| { |
| unsigned int mant_pre = scale >> 12; |
| if (!src || !scale) |
| return src; |
| return ((mant_pre + 2 * (src - 1)) / (2 * mant_pre) - 1) * |
| mant_pre * 4096 / scale + 1; |
| } |
| |
| static u16 calc_scale(unsigned int src, unsigned int *dst) |
| { |
| u16 scale; |
| |
| if (src == *dst) |
| return 0; |
| |
| scale = (src * 4096 / *dst) & ~7; |
| |
| while (scale > 4096 && size_dst(src, scale) < *dst) |
| scale -= 8; |
| |
| *dst = size_dst(src, scale); |
| |
| return scale; |
| } |
| |
| /* rect is guaranteed to not exceed the scaled camera rectangle */ |
| static void sh_mobile_ceu_set_rect(struct soc_camera_device *icd, |
| unsigned int out_width, |
| unsigned int out_height) |
| { |
| struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); |
| struct sh_mobile_ceu_cam *cam = icd->host_priv; |
| struct v4l2_rect *rect = &cam->ceu_rect; |
| struct sh_mobile_ceu_dev *pcdev = ici->priv; |
| unsigned int height, width, cdwdr_width, in_width, in_height; |
| unsigned int left_offset, top_offset; |
| u32 camor; |
| |
| dev_dbg(icd->dev.parent, "Crop %ux%u@%u:%u\n", |
| rect->width, rect->height, rect->left, rect->top); |
| |
| left_offset = rect->left; |
| top_offset = rect->top; |
| |
| if (pcdev->image_mode) { |
| in_width = rect->width; |
| if (!pcdev->is_16bit) { |
| in_width *= 2; |
| left_offset *= 2; |
| } |
| width = cdwdr_width = out_width; |
| } else { |
| unsigned int w_factor = (icd->current_fmt->depth + 7) >> 3; |
| |
| width = out_width * w_factor / 2; |
| |
| if (!pcdev->is_16bit) |
| w_factor *= 2; |
| |
| in_width = rect->width * w_factor / 2; |
| left_offset = left_offset * w_factor / 2; |
| |
| cdwdr_width = width * 2; |
| } |
| |
| height = out_height; |
| in_height = rect->height; |
| if (pcdev->is_interlaced) { |
| height /= 2; |
| in_height /= 2; |
| top_offset /= 2; |
| cdwdr_width *= 2; |
| } |
| |
| /* Set CAMOR, CAPWR, CFSZR, take care of CDWDR */ |
| camor = left_offset | (top_offset << 16); |
| |
| dev_geo(icd->dev.parent, |
| "CAMOR 0x%x, CAPWR 0x%x, CFSZR 0x%x, CDWDR 0x%x\n", camor, |
| (in_height << 16) | in_width, (height << 16) | width, |
| cdwdr_width); |
| |
| ceu_write(pcdev, CAMOR, camor); |
| ceu_write(pcdev, CAPWR, (in_height << 16) | in_width); |
| ceu_write(pcdev, CFSZR, (height << 16) | width); |
| ceu_write(pcdev, CDWDR, cdwdr_width); |
| } |
| |
| static u32 capture_save_reset(struct sh_mobile_ceu_dev *pcdev) |
| { |
| u32 capsr = ceu_read(pcdev, CAPSR); |
| ceu_write(pcdev, CAPSR, 1 << 16); /* reset, stop capture */ |
| return capsr; |
| } |
| |
| static void capture_restore(struct sh_mobile_ceu_dev *pcdev, u32 capsr) |
| { |
| unsigned long timeout = jiffies + 10 * HZ; |
| |
| /* |
| * Wait until the end of the current frame. It can take a long time, |
| * but if it has been aborted by a CAPSR reset, it shoule exit sooner. |
| */ |
| while ((ceu_read(pcdev, CSTSR) & 1) && time_before(jiffies, timeout)) |
| msleep(1); |
| |
| if (time_after(jiffies, timeout)) { |
| dev_err(pcdev->ici.v4l2_dev.dev, |
| "Timeout waiting for frame end! Interface problem?\n"); |
| return; |
| } |
| |
| /* Wait until reset clears, this shall not hang... */ |
| while (ceu_read(pcdev, CAPSR) & (1 << 16)) |
| udelay(10); |
| |
| /* Anything to restore? */ |
| if (capsr & ~(1 << 16)) |
| ceu_write(pcdev, CAPSR, capsr); |
| } |
| |
| static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd, |
| __u32 pixfmt) |
| { |
| struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); |
| struct sh_mobile_ceu_dev *pcdev = ici->priv; |
| int ret; |
| unsigned long camera_flags, common_flags, value; |
| int yuv_lineskip; |
| struct sh_mobile_ceu_cam *cam = icd->host_priv; |
| u32 capsr = capture_save_reset(pcdev); |
| |
| camera_flags = icd->ops->query_bus_param(icd); |
| common_flags = soc_camera_bus_param_compatible(camera_flags, |
| make_bus_param(pcdev)); |
| if (!common_flags) |
| return -EINVAL; |
| |
| ret = icd->ops->set_bus_param(icd, common_flags); |
| if (ret < 0) |
| return ret; |
| |
| switch (common_flags & SOCAM_DATAWIDTH_MASK) { |
| case SOCAM_DATAWIDTH_8: |
| pcdev->is_16bit = 0; |
| break; |
| case SOCAM_DATAWIDTH_16: |
| pcdev->is_16bit = 1; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| ceu_write(pcdev, CRCNTR, 0); |
| ceu_write(pcdev, CRCMPR, 0); |
| |
| value = 0x00000010; /* data fetch by default */ |
| yuv_lineskip = 0; |
| |
| switch (icd->current_fmt->fourcc) { |
| case V4L2_PIX_FMT_NV12: |
| case V4L2_PIX_FMT_NV21: |
| yuv_lineskip = 1; /* skip for NV12/21, no skip for NV16/61 */ |
| /* fall-through */ |
| case V4L2_PIX_FMT_NV16: |
| case V4L2_PIX_FMT_NV61: |
| switch (cam->camera_fmt->fourcc) { |
| case V4L2_PIX_FMT_UYVY: |
| value = 0x00000000; /* Cb0, Y0, Cr0, Y1 */ |
| break; |
| case V4L2_PIX_FMT_VYUY: |
| value = 0x00000100; /* Cr0, Y0, Cb0, Y1 */ |
| break; |
| case V4L2_PIX_FMT_YUYV: |
| value = 0x00000200; /* Y0, Cb0, Y1, Cr0 */ |
| break; |
| case V4L2_PIX_FMT_YVYU: |
| value = 0x00000300; /* Y0, Cr0, Y1, Cb0 */ |
| break; |
| default: |
| BUG(); |
| } |
| } |
| |
| if (icd->current_fmt->fourcc == V4L2_PIX_FMT_NV21 || |
| icd->current_fmt->fourcc == V4L2_PIX_FMT_NV61) |
| value ^= 0x00000100; /* swap U, V to change from NV1x->NVx1 */ |
| |
| value |= common_flags & SOCAM_VSYNC_ACTIVE_LOW ? 1 << 1 : 0; |
| value |= common_flags & SOCAM_HSYNC_ACTIVE_LOW ? 1 << 0 : 0; |
| value |= pcdev->is_16bit ? 1 << 12 : 0; |
| ceu_write(pcdev, CAMCR, value); |
| |
| ceu_write(pcdev, CAPCR, 0x00300000); |
| ceu_write(pcdev, CAIFR, pcdev->is_interlaced ? 0x101 : 0); |
| |
| sh_mobile_ceu_set_rect(icd, icd->user_width, icd->user_height); |
| mdelay(1); |
| |
| ceu_write(pcdev, CFLCR, pcdev->cflcr); |
| |
| /* A few words about byte order (observed in Big Endian mode) |
| * |
| * In data fetch mode bytes are received in chunks of 8 bytes. |
| * D0, D1, D2, D3, D4, D5, D6, D7 (D0 received first) |
| * |
| * The data is however by default written to memory in reverse order: |
| * D7, D6, D5, D4, D3, D2, D1, D0 (D7 written to lowest byte) |
| * |
| * The lowest three bits of CDOCR allows us to do swapping, |
| * using 7 we swap the data bytes to match the incoming order: |
| * D0, D1, D2, D3, D4, D5, D6, D7 |
| */ |
| value = 0x00000017; |
| if (yuv_lineskip) |
| value &= ~0x00000010; /* convert 4:2:2 -> 4:2:0 */ |
| |
| ceu_write(pcdev, CDOCR, value); |
| ceu_write(pcdev, CFWCR, 0); /* keep "datafetch firewall" disabled */ |
| |
| dev_dbg(icd->dev.parent, "S_FMT successful for %c%c%c%c %ux%u\n", |
| pixfmt & 0xff, (pixfmt >> 8) & 0xff, |
| (pixfmt >> 16) & 0xff, (pixfmt >> 24) & 0xff, |
| icd->user_width, icd->user_height); |
| |
| capture_restore(pcdev, capsr); |
| |
| /* not in bundle mode: skip CBDSR, CDAYR2, CDACR2, CDBYR2, CDBCR2 */ |
| return 0; |
| } |
| |
| static int sh_mobile_ceu_try_bus_param(struct soc_camera_device *icd) |
| { |
| struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); |
| struct sh_mobile_ceu_dev *pcdev = ici->priv; |
| unsigned long camera_flags, common_flags; |
| |
| camera_flags = icd->ops->query_bus_param(icd); |
| common_flags = soc_camera_bus_param_compatible(camera_flags, |
| make_bus_param(pcdev)); |
| if (!common_flags) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static const struct soc_camera_data_format sh_mobile_ceu_formats[] = { |
| { |
| .name = "NV12", |
| .depth = 12, |
| .fourcc = V4L2_PIX_FMT_NV12, |
| .colorspace = V4L2_COLORSPACE_JPEG, |
| }, |
| { |
| .name = "NV21", |
| .depth = 12, |
| .fourcc = V4L2_PIX_FMT_NV21, |
| .colorspace = V4L2_COLORSPACE_JPEG, |
| }, |
| { |
| .name = "NV16", |
| .depth = 16, |
| .fourcc = V4L2_PIX_FMT_NV16, |
| .colorspace = V4L2_COLORSPACE_JPEG, |
| }, |
| { |
| .name = "NV61", |
| .depth = 16, |
| .fourcc = V4L2_PIX_FMT_NV61, |
| .colorspace = V4L2_COLORSPACE_JPEG, |
| }, |
| }; |
| |
| static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, int idx, |
| struct soc_camera_format_xlate *xlate) |
| { |
| struct device *dev = icd->dev.parent; |
| int ret, k, n; |
| int formats = 0; |
| struct sh_mobile_ceu_cam *cam; |
| |
| ret = sh_mobile_ceu_try_bus_param(icd); |
| if (ret < 0) |
| return 0; |
| |
| if (!icd->host_priv) { |
| cam = kzalloc(sizeof(*cam), GFP_KERNEL); |
| if (!cam) |
| return -ENOMEM; |
| |
| icd->host_priv = cam; |
| } else { |
| cam = icd->host_priv; |
| } |
| |
| /* Beginning of a pass */ |
| if (!idx) |
| cam->extra_fmt = NULL; |
| |
| switch (icd->formats[idx].fourcc) { |
| case V4L2_PIX_FMT_UYVY: |
| case V4L2_PIX_FMT_VYUY: |
| case V4L2_PIX_FMT_YUYV: |
| case V4L2_PIX_FMT_YVYU: |
| if (cam->extra_fmt) |
| goto add_single_format; |
| |
| /* |
| * Our case is simple so far: for any of the above four camera |
| * formats we add all our four synthesized NV* formats, so, |
| * just marking the device with a single flag suffices. If |
| * the format generation rules are more complex, you would have |
| * to actually hang your already added / counted formats onto |
| * the host_priv pointer and check whether the format you're |
| * going to add now is already there. |
| */ |
| cam->extra_fmt = (void *)sh_mobile_ceu_formats; |
| |
| n = ARRAY_SIZE(sh_mobile_ceu_formats); |
| formats += n; |
| for (k = 0; xlate && k < n; k++) { |
| xlate->host_fmt = &sh_mobile_ceu_formats[k]; |
| xlate->cam_fmt = icd->formats + idx; |
| xlate->buswidth = icd->formats[idx].depth; |
| xlate++; |
| dev_dbg(dev, "Providing format %s using %s\n", |
| sh_mobile_ceu_formats[k].name, |
| icd->formats[idx].name); |
| } |
| default: |
| add_single_format: |
| /* Generic pass-through */ |
| formats++; |
| if (xlate) { |
| xlate->host_fmt = icd->formats + idx; |
| xlate->cam_fmt = icd->formats + idx; |
| xlate->buswidth = icd->formats[idx].depth; |
| xlate++; |
| dev_dbg(dev, |
| "Providing format %s in pass-through mode\n", |
| icd->formats[idx].name); |
| } |
| } |
| |
| return formats; |
| } |
| |
| static void sh_mobile_ceu_put_formats(struct soc_camera_device *icd) |
| { |
| kfree(icd->host_priv); |
| icd->host_priv = NULL; |
| } |
| |
| /* Check if any dimension of r1 is smaller than respective one of r2 */ |
| static bool is_smaller(struct v4l2_rect *r1, struct v4l2_rect *r2) |
| { |
| return r1->width < r2->width || r1->height < r2->height; |
| } |
| |
| /* Check if r1 fails to cover r2 */ |
| static bool is_inside(struct v4l2_rect *r1, struct v4l2_rect *r2) |
| { |
| return r1->left > r2->left || r1->top > r2->top || |
| r1->left + r1->width < r2->left + r2->width || |
| r1->top + r1->height < r2->top + r2->height; |
| } |
| |
| static unsigned int scale_down(unsigned int size, unsigned int scale) |
| { |
| return (size * 4096 + scale / 2) / scale; |
| } |
| |
| static unsigned int scale_up(unsigned int size, unsigned int scale) |
| { |
| return (size * scale + 2048) / 4096; |
| } |
| |
| static unsigned int calc_generic_scale(unsigned int input, unsigned int output) |
| { |
| return (input * 4096 + output / 2) / output; |
| } |
| |
| static int client_g_rect(struct v4l2_subdev *sd, struct v4l2_rect *rect) |
| { |
| struct v4l2_crop crop; |
| struct v4l2_cropcap cap; |
| int ret; |
| |
| crop.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| |
| ret = v4l2_subdev_call(sd, video, g_crop, &crop); |
| if (!ret) { |
| *rect = crop.c; |
| return ret; |
| } |
| |
| /* Camera driver doesn't support .g_crop(), assume default rectangle */ |
| cap.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| |
| ret = v4l2_subdev_call(sd, video, cropcap, &cap); |
| if (ret < 0) |
| return ret; |
| |
| *rect = cap.defrect; |
| |
| return ret; |
| } |
| |
| /* |
| * The common for both scaling and cropping iterative approach is: |
| * 1. try if the client can produce exactly what requested by the user |
| * 2. if (1) failed, try to double the client image until we get one big enough |
| * 3. if (2) failed, try to request the maximum image |
| */ |
| static int client_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *crop, |
| struct v4l2_crop *cam_crop) |
| { |
| struct v4l2_rect *rect = &crop->c, *cam_rect = &cam_crop->c; |
| struct device *dev = sd->v4l2_dev->dev; |
| struct v4l2_cropcap cap; |
| int ret; |
| unsigned int width, height; |
| |
| v4l2_subdev_call(sd, video, s_crop, crop); |
| ret = client_g_rect(sd, cam_rect); |
| if (ret < 0) |
| return ret; |
| |
| /* |
| * Now cam_crop contains the current camera input rectangle, and it must |
| * be within camera cropcap bounds |
| */ |
| if (!memcmp(rect, cam_rect, sizeof(*rect))) { |
| /* Even if camera S_CROP failed, but camera rectangle matches */ |
| dev_dbg(dev, "Camera S_CROP successful for %ux%u@%u:%u\n", |
| rect->width, rect->height, rect->left, rect->top); |
| return 0; |
| } |
| |
| /* Try to fix cropping, that camera hasn't managed to set */ |
| dev_geo(dev, "Fix camera S_CROP for %ux%u@%u:%u to %ux%u@%u:%u\n", |
| cam_rect->width, cam_rect->height, |
| cam_rect->left, cam_rect->top, |
| rect->width, rect->height, rect->left, rect->top); |
| |
| /* We need sensor maximum rectangle */ |
| ret = v4l2_subdev_call(sd, video, cropcap, &cap); |
| if (ret < 0) |
| return ret; |
| |
| soc_camera_limit_side(&rect->left, &rect->width, cap.bounds.left, 2, |
| cap.bounds.width); |
| soc_camera_limit_side(&rect->top, &rect->height, cap.bounds.top, 4, |
| cap.bounds.height); |
| |
| /* |
| * Popular special case - some cameras can only handle fixed sizes like |
| * QVGA, VGA,... Take care to avoid infinite loop. |
| */ |
| width = max(cam_rect->width, 2); |
| height = max(cam_rect->height, 2); |
| |
| while (!ret && (is_smaller(cam_rect, rect) || |
| is_inside(cam_rect, rect)) && |
| (cap.bounds.width > width || cap.bounds.height > height)) { |
| |
| width *= 2; |
| height *= 2; |
| |
| cam_rect->width = width; |
| cam_rect->height = height; |
| |
| /* |
| * We do not know what capabilities the camera has to set up |
| * left and top borders. We could try to be smarter in iterating |
| * them, e.g., if camera current left is to the right of the |
| * target left, set it to the middle point between the current |
| * left and minimum left. But that would add too much |
| * complexity: we would have to iterate each border separately. |
| */ |
| if (cam_rect->left > rect->left) |
| cam_rect->left = cap.bounds.left; |
| |
| if (cam_rect->left + cam_rect->width < rect->left + rect->width) |
| cam_rect->width = rect->left + rect->width - |
| cam_rect->left; |
| |
| if (cam_rect->top > rect->top) |
| cam_rect->top = cap.bounds.top; |
| |
| if (cam_rect->top + cam_rect->height < rect->top + rect->height) |
| cam_rect->height = rect->top + rect->height - |
| cam_rect->top; |
| |
| v4l2_subdev_call(sd, video, s_crop, cam_crop); |
| ret = client_g_rect(sd, cam_rect); |
| dev_geo(dev, "Camera S_CROP %d for %ux%u@%u:%u\n", ret, |
| cam_rect->width, cam_rect->height, |
| cam_rect->left, cam_rect->top); |
| } |
| |
| /* S_CROP must not modify the rectangle */ |
| if (is_smaller(cam_rect, rect) || is_inside(cam_rect, rect)) { |
| /* |
| * The camera failed to configure a suitable cropping, |
| * we cannot use the current rectangle, set to max |
| */ |
| *cam_rect = cap.bounds; |
| v4l2_subdev_call(sd, video, s_crop, cam_crop); |
| ret = client_g_rect(sd, cam_rect); |
| dev_geo(dev, "Camera S_CROP %d for max %ux%u@%u:%u\n", ret, |
| cam_rect->width, cam_rect->height, |
| cam_rect->left, cam_rect->top); |
| } |
| |
| return ret; |
| } |
| |
| static int get_camera_scales(struct v4l2_subdev *sd, struct v4l2_rect *rect, |
| unsigned int *scale_h, unsigned int *scale_v) |
| { |
| struct v4l2_format f; |
| int ret; |
| |
| f.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| |
| ret = v4l2_subdev_call(sd, video, g_fmt, &f); |
| if (ret < 0) |
| return ret; |
| |
| *scale_h = calc_generic_scale(rect->width, f.fmt.pix.width); |
| *scale_v = calc_generic_scale(rect->height, f.fmt.pix.height); |
| |
| return 0; |
| } |
| |
| static int get_camera_subwin(struct soc_camera_device *icd, |
| struct v4l2_rect *cam_subrect, |
| unsigned int cam_hscale, unsigned int cam_vscale) |
| { |
| struct sh_mobile_ceu_cam *cam = icd->host_priv; |
| struct v4l2_rect *ceu_rect = &cam->ceu_rect; |
| |
| if (!ceu_rect->width) { |
| struct v4l2_subdev *sd = soc_camera_to_subdev(icd); |
| struct device *dev = icd->dev.parent; |
| struct v4l2_format f; |
| struct v4l2_pix_format *pix = &f.fmt.pix; |
| int ret; |
| /* First time */ |
| |
| f.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| |
| ret = v4l2_subdev_call(sd, video, g_fmt, &f); |
| if (ret < 0) |
| return ret; |
| |
| dev_geo(dev, "camera fmt %ux%u\n", pix->width, pix->height); |
| |
| if (pix->width > 2560) { |
| ceu_rect->width = 2560; |
| ceu_rect->left = (pix->width - 2560) / 2; |
| } else { |
| ceu_rect->width = pix->width; |
| ceu_rect->left = 0; |
| } |
| |
| if (pix->height > 1920) { |
| ceu_rect->height = 1920; |
| ceu_rect->top = (pix->height - 1920) / 2; |
| } else { |
| ceu_rect->height = pix->height; |
| ceu_rect->top = 0; |
| } |
| |
| dev_geo(dev, "initialised CEU rect %ux%u@%u:%u\n", |
| ceu_rect->width, ceu_rect->height, |
| ceu_rect->left, ceu_rect->top); |
| } |
| |
| cam_subrect->width = scale_up(ceu_rect->width, cam_hscale); |
| cam_subrect->left = scale_up(ceu_rect->left, cam_hscale); |
| cam_subrect->height = scale_up(ceu_rect->height, cam_vscale); |
| cam_subrect->top = scale_up(ceu_rect->top, cam_vscale); |
| |
| return 0; |
| } |
| |
| static int client_s_fmt(struct soc_camera_device *icd, struct v4l2_format *f, |
| bool ceu_can_scale) |
| { |
| struct v4l2_subdev *sd = soc_camera_to_subdev(icd); |
| struct device *dev = icd->dev.parent; |
| struct v4l2_pix_format *pix = &f->fmt.pix; |
| unsigned int width = pix->width, height = pix->height, tmp_w, tmp_h; |
| unsigned int max_width, max_height; |
| struct v4l2_cropcap cap; |
| int ret; |
| |
| cap.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| |
| ret = v4l2_subdev_call(sd, video, cropcap, &cap); |
| if (ret < 0) |
| return ret; |
| |
| max_width = min(cap.bounds.width, 2560); |
| max_height = min(cap.bounds.height, 1920); |
| |
| ret = v4l2_subdev_call(sd, video, s_fmt, f); |
| if (ret < 0) |
| return ret; |
| |
| dev_geo(dev, "camera scaled to %ux%u\n", pix->width, pix->height); |
| |
| if ((width == pix->width && height == pix->height) || !ceu_can_scale) |
| return 0; |
| |
| /* Camera set a format, but geometry is not precise, try to improve */ |
| tmp_w = pix->width; |
| tmp_h = pix->height; |
| |
| /* width <= max_width && height <= max_height - guaranteed by try_fmt */ |
| while ((width > tmp_w || height > tmp_h) && |
| tmp_w < max_width && tmp_h < max_height) { |
| tmp_w = min(2 * tmp_w, max_width); |
| tmp_h = min(2 * tmp_h, max_height); |
| pix->width = tmp_w; |
| pix->height = tmp_h; |
| ret = v4l2_subdev_call(sd, video, s_fmt, f); |
| dev_geo(dev, "Camera scaled to %ux%u\n", |
| pix->width, pix->height); |
| if (ret < 0) { |
| /* This shouldn't happen */ |
| dev_err(dev, "Client failed to set format: %d\n", ret); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * @rect - camera cropped rectangle |
| * @sub_rect - CEU cropped rectangle, mapped back to camera input area |
| * @ceu_rect - on output calculated CEU crop rectangle |
| */ |
| static int client_scale(struct soc_camera_device *icd, struct v4l2_rect *rect, |
| struct v4l2_rect *sub_rect, struct v4l2_rect *ceu_rect, |
| struct v4l2_format *f, bool ceu_can_scale) |
| { |
| struct v4l2_subdev *sd = soc_camera_to_subdev(icd); |
| struct sh_mobile_ceu_cam *cam = icd->host_priv; |
| struct device *dev = icd->dev.parent; |
| struct v4l2_format f_tmp = *f; |
| struct v4l2_pix_format *pix_tmp = &f_tmp.fmt.pix; |
| unsigned int scale_h, scale_v; |
| int ret; |
| |
| /* 5. Apply iterative camera S_FMT for camera user window. */ |
| ret = client_s_fmt(icd, &f_tmp, ceu_can_scale); |
| if (ret < 0) |
| return ret; |
| |
| dev_geo(dev, "5: camera scaled to %ux%u\n", |
| pix_tmp->width, pix_tmp->height); |
| |
| /* 6. Retrieve camera output window (g_fmt) */ |
| |
| /* unneeded - it is already in "f_tmp" */ |
| |
| /* 7. Calculate new camera scales. */ |
| ret = get_camera_scales(sd, rect, &scale_h, &scale_v); |
| if (ret < 0) |
| return ret; |
| |
| dev_geo(dev, "7: camera scales %u:%u\n", scale_h, scale_v); |
| |
| cam->cam_width = pix_tmp->width; |
| cam->cam_height = pix_tmp->height; |
| f->fmt.pix.width = pix_tmp->width; |
| f->fmt.pix.height = pix_tmp->height; |
| |
| /* |
| * 8. Calculate new CEU crop - apply camera scales to previously |
| * calculated "effective" crop. |
| */ |
| ceu_rect->left = scale_down(sub_rect->left, scale_h); |
| ceu_rect->width = scale_down(sub_rect->width, scale_h); |
| ceu_rect->top = scale_down(sub_rect->top, scale_v); |
| ceu_rect->height = scale_down(sub_rect->height, scale_v); |
| |
| dev_geo(dev, "8: new CEU rect %ux%u@%u:%u\n", |
| ceu_rect->width, ceu_rect->height, |
| ceu_rect->left, ceu_rect->top); |
| |
| return 0; |
| } |
| |
| /* Get combined scales */ |
| static int get_scales(struct soc_camera_device *icd, |
| unsigned int *scale_h, unsigned int *scale_v) |
| { |
| struct sh_mobile_ceu_cam *cam = icd->host_priv; |
| struct v4l2_subdev *sd = soc_camera_to_subdev(icd); |
| struct v4l2_crop cam_crop; |
| unsigned int width_in, height_in; |
| int ret; |
| |
| cam_crop.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| |
| ret = client_g_rect(sd, &cam_crop.c); |
| if (ret < 0) |
| return ret; |
| |
| ret = get_camera_scales(sd, &cam_crop.c, scale_h, scale_v); |
| if (ret < 0) |
| return ret; |
| |
| width_in = scale_up(cam->ceu_rect.width, *scale_h); |
| height_in = scale_up(cam->ceu_rect.height, *scale_v); |
| |
| *scale_h = calc_generic_scale(width_in, icd->user_width); |
| *scale_v = calc_generic_scale(height_in, icd->user_height); |
| |
| return 0; |
| } |
| |
| /* |
| * CEU can scale and crop, but we don't want to waste bandwidth and kill the |
| * framerate by always requesting the maximum image from the client. See |
| * Documentation/video4linux/sh_mobile_camera_ceu.txt for a description of |
| * scaling and cropping algorithms and for the meaning of referenced here steps. |
| */ |
| static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd, |
| struct v4l2_crop *a) |
| { |
| struct v4l2_rect *rect = &a->c; |
| struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); |
| struct sh_mobile_ceu_dev *pcdev = ici->priv; |
| struct v4l2_crop cam_crop; |
| struct sh_mobile_ceu_cam *cam = icd->host_priv; |
| struct v4l2_rect *cam_rect = &cam_crop.c, *ceu_rect = &cam->ceu_rect; |
| struct v4l2_subdev *sd = soc_camera_to_subdev(icd); |
| struct device *dev = icd->dev.parent; |
| struct v4l2_format f; |
| struct v4l2_pix_format *pix = &f.fmt.pix; |
| unsigned int scale_comb_h, scale_comb_v, scale_ceu_h, scale_ceu_v, |
| out_width, out_height; |
| u32 capsr, cflcr; |
| int ret; |
| |
| /* 1. Calculate current combined scales. */ |
| ret = get_scales(icd, &scale_comb_h, &scale_comb_v); |
| if (ret < 0) |
| return ret; |
| |
| dev_geo(dev, "1: combined scales %u:%u\n", scale_comb_h, scale_comb_v); |
| |
| /* 2. Apply iterative camera S_CROP for new input window. */ |
| ret = client_s_crop(sd, a, &cam_crop); |
| if (ret < 0) |
| return ret; |
| |
| dev_geo(dev, "2: camera cropped to %ux%u@%u:%u\n", |
| cam_rect->width, cam_rect->height, |
| cam_rect->left, cam_rect->top); |
| |
| /* On success cam_crop contains current camera crop */ |
| |
| /* |
| * 3. If old combined scales applied to new crop produce an impossible |
| * user window, adjust scales to produce nearest possible window. |
| */ |
| out_width = scale_down(rect->width, scale_comb_h); |
| out_height = scale_down(rect->height, scale_comb_v); |
| |
| if (out_width > 2560) |
| out_width = 2560; |
| else if (out_width < 2) |
| out_width = 2; |
| |
| if (out_height > 1920) |
| out_height = 1920; |
| else if (out_height < 4) |
| out_height = 4; |
| |
| dev_geo(dev, "3: Adjusted output %ux%u\n", out_width, out_height); |
| |
| /* 4. Use G_CROP to retrieve actual input window: already in cam_crop */ |
| |
| /* |
| * 5. Using actual input window and calculated combined scales calculate |
| * camera target output window. |
| */ |
| pix->width = scale_down(cam_rect->width, scale_comb_h); |
| pix->height = scale_down(cam_rect->height, scale_comb_v); |
| |
| dev_geo(dev, "5: camera target %ux%u\n", pix->width, pix->height); |
| |
| /* 6. - 9. */ |
| pix->pixelformat = cam->camera_fmt->fourcc; |
| pix->colorspace = cam->camera_fmt->colorspace; |
| |
| capsr = capture_save_reset(pcdev); |
| dev_dbg(dev, "CAPSR 0x%x, CFLCR 0x%x\n", capsr, pcdev->cflcr); |
| |
| /* Make relative to camera rectangle */ |
| rect->left -= cam_rect->left; |
| rect->top -= cam_rect->top; |
| |
| f.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| |
| ret = client_scale(icd, cam_rect, rect, ceu_rect, &f, |
| pcdev->image_mode && !pcdev->is_interlaced); |
| |
| dev_geo(dev, "6-9: %d\n", ret); |
| |
| /* 10. Use CEU cropping to crop to the new window. */ |
| sh_mobile_ceu_set_rect(icd, out_width, out_height); |
| |
| dev_geo(dev, "10: CEU cropped to %ux%u@%u:%u\n", |
| ceu_rect->width, ceu_rect->height, |
| ceu_rect->left, ceu_rect->top); |
| |
| /* |
| * 11. Calculate CEU scales from camera scales from results of (10) and |
| * user window from (3) |
| */ |
| scale_ceu_h = calc_scale(ceu_rect->width, &out_width); |
| scale_ceu_v = calc_scale(ceu_rect->height, &out_height); |
| |
| dev_geo(dev, "11: CEU scales %u:%u\n", scale_ceu_h, scale_ceu_v); |
| |
| /* 12. Apply CEU scales. */ |
| cflcr = scale_ceu_h | (scale_ceu_v << 16); |
| if (cflcr != pcdev->cflcr) { |
| pcdev->cflcr = cflcr; |
| ceu_write(pcdev, CFLCR, cflcr); |
| } |
| |
| /* Restore capture */ |
| if (pcdev->active) |
| capsr |= 1; |
| capture_restore(pcdev, capsr); |
| |
| icd->user_width = out_width; |
| icd->user_height = out_height; |
| |
| /* Even if only camera cropping succeeded */ |
| return ret; |
| } |
| |
| /* Similar to set_crop multistage iterative algorithm */ |
| static int sh_mobile_ceu_set_fmt(struct soc_camera_device *icd, |
| struct v4l2_format *f) |
| { |
| struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); |
| struct sh_mobile_ceu_dev *pcdev = ici->priv; |
| struct sh_mobile_ceu_cam *cam = icd->host_priv; |
| struct v4l2_pix_format *pix = &f->fmt.pix; |
| struct v4l2_format cam_f = *f; |
| struct v4l2_pix_format *cam_pix = &cam_f.fmt.pix; |
| struct v4l2_subdev *sd = soc_camera_to_subdev(icd); |
| struct device *dev = icd->dev.parent; |
| __u32 pixfmt = pix->pixelformat; |
| const struct soc_camera_format_xlate *xlate; |
| struct v4l2_crop cam_crop; |
| struct v4l2_rect *cam_rect = &cam_crop.c, cam_subrect, ceu_rect; |
| unsigned int scale_cam_h, scale_cam_v; |
| u16 scale_v, scale_h; |
| int ret; |
| bool is_interlaced, image_mode; |
| |
| switch (pix->field) { |
| case V4L2_FIELD_INTERLACED: |
| is_interlaced = true; |
| break; |
| case V4L2_FIELD_ANY: |
| default: |
| pix->field = V4L2_FIELD_NONE; |
| /* fall-through */ |
| case V4L2_FIELD_NONE: |
| is_interlaced = false; |
| break; |
| } |
| |
| xlate = soc_camera_xlate_by_fourcc(icd, pixfmt); |
| if (!xlate) { |
| dev_warn(dev, "Format %x not found\n", pixfmt); |
| return -EINVAL; |
| } |
| |
| /* 1. Calculate current camera scales. */ |
| cam_crop.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| |
| ret = client_g_rect(sd, cam_rect); |
| if (ret < 0) |
| return ret; |
| |
| ret = get_camera_scales(sd, cam_rect, &scale_cam_h, &scale_cam_v); |
| if (ret < 0) |
| return ret; |
| |
| dev_geo(dev, "1: camera scales %u:%u\n", scale_cam_h, scale_cam_v); |
| |
| /* |
| * 2. Calculate "effective" input crop (sensor subwindow) - CEU crop |
| * scaled back at current camera scales onto input window. |
| */ |
| ret = get_camera_subwin(icd, &cam_subrect, scale_cam_h, scale_cam_v); |
| if (ret < 0) |
| return ret; |
| |
| dev_geo(dev, "2: subwin %ux%u@%u:%u\n", |
| cam_subrect.width, cam_subrect.height, |
| cam_subrect.left, cam_subrect.top); |
| |
| /* |
| * 3. Calculate new combined scales from "effective" input window to |
| * requested user window. |
| */ |
| scale_h = calc_generic_scale(cam_subrect.width, pix->width); |
| scale_v = calc_generic_scale(cam_subrect.height, pix->height); |
| |
| dev_geo(dev, "3: scales %u:%u\n", scale_h, scale_v); |
| |
| /* |
| * 4. Calculate camera output window by applying combined scales to real |
| * input window. |
| */ |
| cam_pix->width = scale_down(cam_rect->width, scale_h); |
| cam_pix->height = scale_down(cam_rect->height, scale_v); |
| cam_pix->pixelformat = xlate->cam_fmt->fourcc; |
| |
| switch (pixfmt) { |
| case V4L2_PIX_FMT_NV12: |
| case V4L2_PIX_FMT_NV21: |
| case V4L2_PIX_FMT_NV16: |
| case V4L2_PIX_FMT_NV61: |
| image_mode = true; |
| break; |
| default: |
| image_mode = false; |
| } |
| |
| dev_geo(dev, "4: camera output %ux%u\n", |
| cam_pix->width, cam_pix->height); |
| |
| /* 5. - 9. */ |
| ret = client_scale(icd, cam_rect, &cam_subrect, &ceu_rect, &cam_f, |
| image_mode && !is_interlaced); |
| |
| dev_geo(dev, "5-9: client scale %d\n", ret); |
| |
| /* Done with the camera. Now see if we can improve the result */ |
| |
| dev_dbg(dev, "Camera %d fmt %ux%u, requested %ux%u\n", |
| ret, cam_pix->width, cam_pix->height, pix->width, pix->height); |
| if (ret < 0) |
| return ret; |
| |
| /* 10. Use CEU scaling to scale to the requested user window. */ |
| |
| /* We cannot scale up */ |
| if (pix->width > cam_pix->width) |
| pix->width = cam_pix->width; |
| if (pix->width > ceu_rect.width) |
| pix->width = ceu_rect.width; |
| |
| if (pix->height > cam_pix->height) |
| pix->height = cam_pix->height; |
| if (pix->height > ceu_rect.height) |
| pix->height = ceu_rect.height; |
| |
| /* Let's rock: scale pix->{width x height} down to width x height */ |
| scale_h = calc_scale(ceu_rect.width, &pix->width); |
| scale_v = calc_scale(ceu_rect.height, &pix->height); |
| |
| dev_geo(dev, "10: W: %u : 0x%x = %u, H: %u : 0x%x = %u\n", |
| ceu_rect.width, scale_h, pix->width, |
| ceu_rect.height, scale_v, pix->height); |
| |
| pcdev->cflcr = scale_h | (scale_v << 16); |
| |
| icd->buswidth = xlate->buswidth; |
| icd->current_fmt = xlate->host_fmt; |
| cam->camera_fmt = xlate->cam_fmt; |
| cam->ceu_rect = ceu_rect; |
| |
| pcdev->is_interlaced = is_interlaced; |
| pcdev->image_mode = image_mode; |
| |
| return 0; |
| } |
| |
| static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd, |
| struct v4l2_format *f) |
| { |
| const struct soc_camera_format_xlate *xlate; |
| struct v4l2_pix_format *pix = &f->fmt.pix; |
| struct v4l2_subdev *sd = soc_camera_to_subdev(icd); |
| __u32 pixfmt = pix->pixelformat; |
| int width, height; |
| int ret; |
| |
| xlate = soc_camera_xlate_by_fourcc(icd, pixfmt); |
| if (!xlate) { |
| dev_warn(icd->dev.parent, "Format %x not found\n", pixfmt); |
| return -EINVAL; |
| } |
| |
| /* FIXME: calculate using depth and bus width */ |
| |
| v4l_bound_align_image(&pix->width, 2, 2560, 1, |
| &pix->height, 4, 1920, 2, 0); |
| |
| width = pix->width; |
| height = pix->height; |
| |
| pix->bytesperline = pix->width * |
| DIV_ROUND_UP(xlate->host_fmt->depth, 8); |
| pix->sizeimage = pix->height * pix->bytesperline; |
| |
| pix->pixelformat = xlate->cam_fmt->fourcc; |
| |
| /* limit to sensor capabilities */ |
| ret = v4l2_subdev_call(sd, video, try_fmt, f); |
| pix->pixelformat = pixfmt; |
| if (ret < 0) |
| return ret; |
| |
| switch (pixfmt) { |
| case V4L2_PIX_FMT_NV12: |
| case V4L2_PIX_FMT_NV21: |
| case V4L2_PIX_FMT_NV16: |
| case V4L2_PIX_FMT_NV61: |
| /* FIXME: check against rect_max after converting soc-camera */ |
| /* We can scale precisely, need a bigger image from camera */ |
| if (pix->width < width || pix->height < height) { |
| int tmp_w = pix->width, tmp_h = pix->height; |
| pix->width = 2560; |
| pix->height = 1920; |
| ret = v4l2_subdev_call(sd, video, try_fmt, f); |
| if (ret < 0) { |
| /* Shouldn't actually happen... */ |
| dev_err(icd->dev.parent, |
| "FIXME: try_fmt() returned %d\n", ret); |
| pix->width = tmp_w; |
| pix->height = tmp_h; |
| } |
| } |
| if (pix->width > width) |
| pix->width = width; |
| if (pix->height > height) |
| pix->height = height; |
| } |
| |
| return ret; |
| } |
| |
| static int sh_mobile_ceu_reqbufs(struct soc_camera_file *icf, |
| struct v4l2_requestbuffers *p) |
| { |
| int i; |
| |
| /* This is for locking debugging only. I removed spinlocks and now I |
| * check whether .prepare is ever called on a linked buffer, or whether |
| * a dma IRQ can occur for an in-work or unlinked buffer. Until now |
| * it hadn't triggered */ |
| for (i = 0; i < p->count; i++) { |
| struct sh_mobile_ceu_buffer *buf; |
| |
| buf = container_of(icf->vb_vidq.bufs[i], |
| struct sh_mobile_ceu_buffer, vb); |
| INIT_LIST_HEAD(&buf->vb.queue); |
| } |
| |
| return 0; |
| } |
| |
| static unsigned int sh_mobile_ceu_poll(struct file *file, poll_table *pt) |
| { |
| struct soc_camera_file *icf = file->private_data; |
| struct sh_mobile_ceu_buffer *buf; |
| |
| buf = list_entry(icf->vb_vidq.stream.next, |
| struct sh_mobile_ceu_buffer, vb.stream); |
| |
| poll_wait(file, &buf->vb.done, pt); |
| |
| if (buf->vb.state == VIDEOBUF_DONE || |
| buf->vb.state == VIDEOBUF_ERROR) |
| return POLLIN|POLLRDNORM; |
| |
| return 0; |
| } |
| |
| static int sh_mobile_ceu_querycap(struct soc_camera_host *ici, |
| struct v4l2_capability *cap) |
| { |
| strlcpy(cap->card, "SuperH_Mobile_CEU", sizeof(cap->card)); |
| cap->version = KERNEL_VERSION(0, 0, 5); |
| cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; |
| return 0; |
| } |
| |
| static void sh_mobile_ceu_init_videobuf(struct videobuf_queue *q, |
| struct soc_camera_device *icd) |
| { |
| struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); |
| struct sh_mobile_ceu_dev *pcdev = ici->priv; |
| |
| videobuf_queue_dma_contig_init(q, |
| &sh_mobile_ceu_videobuf_ops, |
| icd->dev.parent, &pcdev->lock, |
| V4L2_BUF_TYPE_VIDEO_CAPTURE, |
| pcdev->is_interlaced ? |
| V4L2_FIELD_INTERLACED : V4L2_FIELD_NONE, |
| sizeof(struct sh_mobile_ceu_buffer), |
| icd); |
| } |
| |
| static int sh_mobile_ceu_get_ctrl(struct soc_camera_device *icd, |
| struct v4l2_control *ctrl) |
| { |
| struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); |
| struct sh_mobile_ceu_dev *pcdev = ici->priv; |
| u32 val; |
| |
| switch (ctrl->id) { |
| case V4L2_CID_SHARPNESS: |
| val = ceu_read(pcdev, CLFCR); |
| ctrl->value = val ^ 1; |
| return 0; |
| } |
| return -ENOIOCTLCMD; |
| } |
| |
| static int sh_mobile_ceu_set_ctrl(struct soc_camera_device *icd, |
| struct v4l2_control *ctrl) |
| { |
| struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); |
| struct sh_mobile_ceu_dev *pcdev = ici->priv; |
| |
| switch (ctrl->id) { |
| case V4L2_CID_SHARPNESS: |
| switch (icd->current_fmt->fourcc) { |
| case V4L2_PIX_FMT_NV12: |
| case V4L2_PIX_FMT_NV21: |
| case V4L2_PIX_FMT_NV16: |
| case V4L2_PIX_FMT_NV61: |
| ceu_write(pcdev, CLFCR, !ctrl->value); |
| return 0; |
| } |
| return -EINVAL; |
| } |
| return -ENOIOCTLCMD; |
| } |
| |
| static const struct v4l2_queryctrl sh_mobile_ceu_controls[] = { |
| { |
| .id = V4L2_CID_SHARPNESS, |
| .type = V4L2_CTRL_TYPE_BOOLEAN, |
| .name = "Low-pass filter", |
| .minimum = 0, |
| .maximum = 1, |
| .step = 1, |
| .default_value = 0, |
| }, |
| }; |
| |
| static struct soc_camera_host_ops sh_mobile_ceu_host_ops = { |
| .owner = THIS_MODULE, |
| .add = sh_mobile_ceu_add_device, |
| .remove = sh_mobile_ceu_remove_device, |
| .get_formats = sh_mobile_ceu_get_formats, |
| .put_formats = sh_mobile_ceu_put_formats, |
| .set_crop = sh_mobile_ceu_set_crop, |
| .set_fmt = sh_mobile_ceu_set_fmt, |
| .try_fmt = sh_mobile_ceu_try_fmt, |
| .set_ctrl = sh_mobile_ceu_set_ctrl, |
| .get_ctrl = sh_mobile_ceu_get_ctrl, |
| .reqbufs = sh_mobile_ceu_reqbufs, |
| .poll = sh_mobile_ceu_poll, |
| .querycap = sh_mobile_ceu_querycap, |
| .set_bus_param = sh_mobile_ceu_set_bus_param, |
| .init_videobuf = sh_mobile_ceu_init_videobuf, |
| .controls = sh_mobile_ceu_controls, |
| .num_controls = ARRAY_SIZE(sh_mobile_ceu_controls), |
| }; |
| |
| static int __devinit sh_mobile_ceu_probe(struct platform_device *pdev) |
| { |
| struct sh_mobile_ceu_dev *pcdev; |
| struct resource *res; |
| void __iomem *base; |
| unsigned int irq; |
| int err = 0; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| irq = platform_get_irq(pdev, 0); |
| if (!res || !irq) { |
| dev_err(&pdev->dev, "Not enough CEU platform resources.\n"); |
| err = -ENODEV; |
| goto exit; |
| } |
| |
| pcdev = kzalloc(sizeof(*pcdev), GFP_KERNEL); |
| if (!pcdev) { |
| dev_err(&pdev->dev, "Could not allocate pcdev\n"); |
| err = -ENOMEM; |
| goto exit; |
| } |
| |
| INIT_LIST_HEAD(&pcdev->capture); |
| spin_lock_init(&pcdev->lock); |
| |
| pcdev->pdata = pdev->dev.platform_data; |
| if (!pcdev->pdata) { |
| err = -EINVAL; |
| dev_err(&pdev->dev, "CEU platform data not set.\n"); |
| goto exit_kfree; |
| } |
| |
| base = ioremap_nocache(res->start, resource_size(res)); |
| if (!base) { |
| err = -ENXIO; |
| dev_err(&pdev->dev, "Unable to ioremap CEU registers.\n"); |
| goto exit_kfree; |
| } |
| |
| pcdev->irq = irq; |
| pcdev->base = base; |
| pcdev->video_limit = 0; /* only enabled if second resource exists */ |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 1); |
| if (res) { |
| err = dma_declare_coherent_memory(&pdev->dev, res->start, |
| res->start, |
| resource_size(res), |
| DMA_MEMORY_MAP | |
| DMA_MEMORY_EXCLUSIVE); |
| if (!err) { |
| dev_err(&pdev->dev, "Unable to declare CEU memory.\n"); |
| err = -ENXIO; |
| goto exit_iounmap; |
| } |
| |
| pcdev->video_limit = resource_size(res); |
| } |
| |
| /* request irq */ |
| err = request_irq(pcdev->irq, sh_mobile_ceu_irq, IRQF_DISABLED, |
| dev_name(&pdev->dev), pcdev); |
| if (err) { |
| dev_err(&pdev->dev, "Unable to register CEU interrupt.\n"); |
| goto exit_release_mem; |
| } |
| |
| pm_suspend_ignore_children(&pdev->dev, true); |
| pm_runtime_enable(&pdev->dev); |
| pm_runtime_resume(&pdev->dev); |
| |
| pcdev->ici.priv = pcdev; |
| pcdev->ici.v4l2_dev.dev = &pdev->dev; |
| pcdev->ici.nr = pdev->id; |
| pcdev->ici.drv_name = dev_name(&pdev->dev); |
| pcdev->ici.ops = &sh_mobile_ceu_host_ops; |
| |
| err = soc_camera_host_register(&pcdev->ici); |
| if (err) |
| goto exit_free_clk; |
| |
| return 0; |
| |
| exit_free_clk: |
| pm_runtime_disable(&pdev->dev); |
| free_irq(pcdev->irq, pcdev); |
| exit_release_mem: |
| if (platform_get_resource(pdev, IORESOURCE_MEM, 1)) |
| dma_release_declared_memory(&pdev->dev); |
| exit_iounmap: |
| iounmap(base); |
| exit_kfree: |
| kfree(pcdev); |
| exit: |
| return err; |
| } |
| |
| static int __devexit sh_mobile_ceu_remove(struct platform_device *pdev) |
| { |
| struct soc_camera_host *soc_host = to_soc_camera_host(&pdev->dev); |
| struct sh_mobile_ceu_dev *pcdev = container_of(soc_host, |
| struct sh_mobile_ceu_dev, ici); |
| |
| soc_camera_host_unregister(soc_host); |
| pm_runtime_disable(&pdev->dev); |
| free_irq(pcdev->irq, pcdev); |
| if (platform_get_resource(pdev, IORESOURCE_MEM, 1)) |
| dma_release_declared_memory(&pdev->dev); |
| iounmap(pcdev->base); |
| kfree(pcdev); |
| return 0; |
| } |
| |
| static int sh_mobile_ceu_runtime_nop(struct device *dev) |
| { |
| /* Runtime PM callback shared between ->runtime_suspend() |
| * and ->runtime_resume(). Simply returns success. |
| * |
| * This driver re-initializes all registers after |
| * pm_runtime_get_sync() anyway so there is no need |
| * to save and restore registers here. |
| */ |
| return 0; |
| } |
| |
| static const struct dev_pm_ops sh_mobile_ceu_dev_pm_ops = { |
| .runtime_suspend = sh_mobile_ceu_runtime_nop, |
| .runtime_resume = sh_mobile_ceu_runtime_nop, |
| }; |
| |
| static struct platform_driver sh_mobile_ceu_driver = { |
| .driver = { |
| .name = "sh_mobile_ceu", |
| .pm = &sh_mobile_ceu_dev_pm_ops, |
| }, |
| .probe = sh_mobile_ceu_probe, |
| .remove = __exit_p(sh_mobile_ceu_remove), |
| }; |
| |
| static int __init sh_mobile_ceu_init(void) |
| { |
| return platform_driver_register(&sh_mobile_ceu_driver); |
| } |
| |
| static void __exit sh_mobile_ceu_exit(void) |
| { |
| platform_driver_unregister(&sh_mobile_ceu_driver); |
| } |
| |
| module_init(sh_mobile_ceu_init); |
| module_exit(sh_mobile_ceu_exit); |
| |
| MODULE_DESCRIPTION("SuperH Mobile CEU driver"); |
| MODULE_AUTHOR("Magnus Damm"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:sh_mobile_ceu"); |