| /* |
| * Frame buffer driver for ADV7393/2 video encoder |
| * |
| * Copyright 2006-2009 Analog Devices Inc. |
| * Licensed under the GPL-2 or late. |
| */ |
| |
| /* |
| * TODO: Remove Globals |
| * TODO: Code Cleanup |
| */ |
| |
| #define pr_fmt(fmt) DRIVER_NAME ": " fmt |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/string.h> |
| #include <linux/mm.h> |
| #include <linux/tty.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| #include <linux/fb.h> |
| #include <linux/ioport.h> |
| #include <linux/init.h> |
| #include <linux/types.h> |
| #include <linux/interrupt.h> |
| #include <linux/sched.h> |
| #include <asm/blackfin.h> |
| #include <asm/irq.h> |
| #include <asm/dma.h> |
| #include <linux/uaccess.h> |
| #include <linux/gpio.h> |
| #include <asm/portmux.h> |
| |
| #include <linux/dma-mapping.h> |
| #include <linux/proc_fs.h> |
| #include <linux/platform_device.h> |
| #include <linux/i2c.h> |
| |
| #include "bfin_adv7393fb.h" |
| |
| static int mode = VMODE; |
| static int mem = VMEM; |
| static int nocursor = 1; |
| |
| static const unsigned short ppi_pins[] = { |
| P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2, |
| P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3, |
| P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7, |
| P_PPI0_D8, P_PPI0_D9, P_PPI0_D10, P_PPI0_D11, |
| P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, P_PPI0_D15, |
| 0 |
| }; |
| |
| /* |
| * card parameters |
| */ |
| |
| static struct bfin_adv7393_fb_par { |
| /* structure holding blackfin / adv7393 paramters when |
| screen is blanked */ |
| struct { |
| u8 Mode; /* ntsc/pal/? */ |
| } vga_state; |
| atomic_t ref_count; |
| } bfin_par; |
| |
| /* --------------------------------------------------------------------- */ |
| |
| static struct fb_var_screeninfo bfin_adv7393_fb_defined = { |
| .xres = 720, |
| .yres = 480, |
| .xres_virtual = 720, |
| .yres_virtual = 480, |
| .bits_per_pixel = 16, |
| .activate = FB_ACTIVATE_TEST, |
| .height = -1, |
| .width = -1, |
| .left_margin = 0, |
| .right_margin = 0, |
| .upper_margin = 0, |
| .lower_margin = 0, |
| .vmode = FB_VMODE_INTERLACED, |
| .red = {11, 5, 0}, |
| .green = {5, 6, 0}, |
| .blue = {0, 5, 0}, |
| .transp = {0, 0, 0}, |
| }; |
| |
| static struct fb_fix_screeninfo bfin_adv7393_fb_fix __devinitdata = { |
| .id = "BFIN ADV7393", |
| .smem_len = 720 * 480 * 2, |
| .type = FB_TYPE_PACKED_PIXELS, |
| .visual = FB_VISUAL_TRUECOLOR, |
| .xpanstep = 0, |
| .ypanstep = 0, |
| .line_length = 720 * 2, |
| .accel = FB_ACCEL_NONE |
| }; |
| |
| static struct fb_ops bfin_adv7393_fb_ops = { |
| .owner = THIS_MODULE, |
| .fb_open = bfin_adv7393_fb_open, |
| .fb_release = bfin_adv7393_fb_release, |
| .fb_check_var = bfin_adv7393_fb_check_var, |
| .fb_pan_display = bfin_adv7393_fb_pan_display, |
| .fb_blank = bfin_adv7393_fb_blank, |
| .fb_fillrect = cfb_fillrect, |
| .fb_copyarea = cfb_copyarea, |
| .fb_imageblit = cfb_imageblit, |
| .fb_cursor = bfin_adv7393_fb_cursor, |
| .fb_setcolreg = bfin_adv7393_fb_setcolreg, |
| }; |
| |
| static int dma_desc_list(struct adv7393fb_device *fbdev, u16 arg) |
| { |
| if (arg == BUILD) { /* Build */ |
| fbdev->vb1 = l1_data_sram_zalloc(sizeof(struct dmasg)); |
| if (fbdev->vb1 == NULL) |
| goto error; |
| |
| fbdev->av1 = l1_data_sram_zalloc(sizeof(struct dmasg)); |
| if (fbdev->av1 == NULL) |
| goto error; |
| |
| fbdev->vb2 = l1_data_sram_zalloc(sizeof(struct dmasg)); |
| if (fbdev->vb2 == NULL) |
| goto error; |
| |
| fbdev->av2 = l1_data_sram_zalloc(sizeof(struct dmasg)); |
| if (fbdev->av2 == NULL) |
| goto error; |
| |
| /* Build linked DMA descriptor list */ |
| fbdev->vb1->next_desc_addr = fbdev->av1; |
| fbdev->av1->next_desc_addr = fbdev->vb2; |
| fbdev->vb2->next_desc_addr = fbdev->av2; |
| fbdev->av2->next_desc_addr = fbdev->vb1; |
| |
| /* Save list head */ |
| fbdev->descriptor_list_head = fbdev->av2; |
| |
| /* Vertical Blanking Field 1 */ |
| fbdev->vb1->start_addr = VB_DUMMY_MEMORY_SOURCE; |
| fbdev->vb1->cfg = DMA_CFG_VAL; |
| |
| fbdev->vb1->x_count = |
| fbdev->modes[mode].xres + fbdev->modes[mode].boeft_blank; |
| |
| fbdev->vb1->x_modify = 0; |
| fbdev->vb1->y_count = fbdev->modes[mode].vb1_lines; |
| fbdev->vb1->y_modify = 0; |
| |
| /* Active Video Field 1 */ |
| |
| fbdev->av1->start_addr = (unsigned long)fbdev->fb_mem; |
| fbdev->av1->cfg = DMA_CFG_VAL; |
| fbdev->av1->x_count = |
| fbdev->modes[mode].xres + fbdev->modes[mode].boeft_blank; |
| fbdev->av1->x_modify = fbdev->modes[mode].bpp / 8; |
| fbdev->av1->y_count = fbdev->modes[mode].a_lines; |
| fbdev->av1->y_modify = |
| (fbdev->modes[mode].xres - fbdev->modes[mode].boeft_blank + |
| 1) * (fbdev->modes[mode].bpp / 8); |
| |
| /* Vertical Blanking Field 2 */ |
| |
| fbdev->vb2->start_addr = VB_DUMMY_MEMORY_SOURCE; |
| fbdev->vb2->cfg = DMA_CFG_VAL; |
| fbdev->vb2->x_count = |
| fbdev->modes[mode].xres + fbdev->modes[mode].boeft_blank; |
| |
| fbdev->vb2->x_modify = 0; |
| fbdev->vb2->y_count = fbdev->modes[mode].vb2_lines; |
| fbdev->vb2->y_modify = 0; |
| |
| /* Active Video Field 2 */ |
| |
| fbdev->av2->start_addr = |
| (unsigned long)fbdev->fb_mem + fbdev->line_len; |
| |
| fbdev->av2->cfg = DMA_CFG_VAL; |
| |
| fbdev->av2->x_count = |
| fbdev->modes[mode].xres + fbdev->modes[mode].boeft_blank; |
| |
| fbdev->av2->x_modify = (fbdev->modes[mode].bpp / 8); |
| fbdev->av2->y_count = fbdev->modes[mode].a_lines; |
| |
| fbdev->av2->y_modify = |
| (fbdev->modes[mode].xres - fbdev->modes[mode].boeft_blank + |
| 1) * (fbdev->modes[mode].bpp / 8); |
| |
| return 1; |
| } |
| |
| error: |
| l1_data_sram_free(fbdev->vb1); |
| l1_data_sram_free(fbdev->av1); |
| l1_data_sram_free(fbdev->vb2); |
| l1_data_sram_free(fbdev->av2); |
| |
| return 0; |
| } |
| |
| static int bfin_config_dma(struct adv7393fb_device *fbdev) |
| { |
| BUG_ON(!(fbdev->fb_mem)); |
| |
| set_dma_x_count(CH_PPI, fbdev->descriptor_list_head->x_count); |
| set_dma_x_modify(CH_PPI, fbdev->descriptor_list_head->x_modify); |
| set_dma_y_count(CH_PPI, fbdev->descriptor_list_head->y_count); |
| set_dma_y_modify(CH_PPI, fbdev->descriptor_list_head->y_modify); |
| set_dma_start_addr(CH_PPI, fbdev->descriptor_list_head->start_addr); |
| set_dma_next_desc_addr(CH_PPI, |
| fbdev->descriptor_list_head->next_desc_addr); |
| set_dma_config(CH_PPI, fbdev->descriptor_list_head->cfg); |
| |
| return 1; |
| } |
| |
| static void bfin_disable_dma(void) |
| { |
| bfin_write_DMA0_CONFIG(bfin_read_DMA0_CONFIG() & ~DMAEN); |
| } |
| |
| static void bfin_config_ppi(struct adv7393fb_device *fbdev) |
| { |
| if (ANOMALY_05000183) { |
| bfin_write_TIMER2_CONFIG(WDTH_CAP); |
| bfin_write_TIMER_ENABLE(TIMEN2); |
| } |
| |
| bfin_write_PPI_CONTROL(0x381E); |
| bfin_write_PPI_FRAME(fbdev->modes[mode].tot_lines); |
| bfin_write_PPI_COUNT(fbdev->modes[mode].xres + |
| fbdev->modes[mode].boeft_blank - 1); |
| bfin_write_PPI_DELAY(fbdev->modes[mode].aoeft_blank - 1); |
| } |
| |
| static void bfin_enable_ppi(void) |
| { |
| bfin_write_PPI_CONTROL(bfin_read_PPI_CONTROL() | PORT_EN); |
| } |
| |
| static void bfin_disable_ppi(void) |
| { |
| bfin_write_PPI_CONTROL(bfin_read_PPI_CONTROL() & ~PORT_EN); |
| } |
| |
| static inline int adv7393_write(struct i2c_client *client, u8 reg, u8 value) |
| { |
| return i2c_smbus_write_byte_data(client, reg, value); |
| } |
| |
| static inline int adv7393_read(struct i2c_client *client, u8 reg) |
| { |
| return i2c_smbus_read_byte_data(client, reg); |
| } |
| |
| static int |
| adv7393_write_block(struct i2c_client *client, |
| const u8 *data, unsigned int len) |
| { |
| int ret = -1; |
| u8 reg; |
| |
| while (len >= 2) { |
| reg = *data++; |
| ret = adv7393_write(client, reg, *data++); |
| if (ret < 0) |
| break; |
| len -= 2; |
| } |
| |
| return ret; |
| } |
| |
| static int adv7393_mode(struct i2c_client *client, u16 mode) |
| { |
| switch (mode) { |
| case POWER_ON: /* ADV7393 Sleep mode OFF */ |
| adv7393_write(client, 0x00, 0x1E); |
| break; |
| case POWER_DOWN: /* ADV7393 Sleep mode ON */ |
| adv7393_write(client, 0x00, 0x1F); |
| break; |
| case BLANK_OFF: /* Pixel Data Valid */ |
| adv7393_write(client, 0x82, 0xCB); |
| break; |
| case BLANK_ON: /* Pixel Data Invalid */ |
| adv7393_write(client, 0x82, 0x8B); |
| break; |
| default: |
| return -EINVAL; |
| break; |
| } |
| return 0; |
| } |
| |
| static irqreturn_t ppi_irq_error(int irq, void *dev_id) |
| { |
| |
| struct adv7393fb_device *fbdev = (struct adv7393fb_device *)dev_id; |
| |
| u16 status = bfin_read_PPI_STATUS(); |
| |
| pr_debug("%s: PPI Status = 0x%X\n", __func__, status); |
| |
| if (status) { |
| bfin_disable_dma(); /* TODO: Check Sequence */ |
| bfin_disable_ppi(); |
| bfin_clear_PPI_STATUS(); |
| bfin_config_dma(fbdev); |
| bfin_enable_ppi(); |
| } |
| |
| return IRQ_HANDLED; |
| |
| } |
| |
| static int proc_output(char *buf) |
| { |
| char *p = buf; |
| |
| p += sprintf(p, |
| "Usage:\n" |
| "echo 0x[REG][Value] > adv7393\n" |
| "example: echo 0x1234 >adv7393\n" |
| "writes 0x34 into Register 0x12\n"); |
| |
| return p - buf; |
| } |
| |
| static int |
| adv7393_read_proc(char *page, char **start, off_t off, |
| int count, int *eof, void *data) |
| { |
| int len; |
| |
| len = proc_output(page); |
| if (len <= off + count) |
| *eof = 1; |
| *start = page + off; |
| len -= off; |
| if (len > count) |
| len = count; |
| if (len < 0) |
| len = 0; |
| return len; |
| } |
| |
| static int |
| adv7393_write_proc(struct file *file, const char __user * buffer, |
| size_t count, void *data) |
| { |
| struct adv7393fb_device *fbdev = data; |
| unsigned int val; |
| int ret; |
| |
| ret = kstrtouint_from_user(buffer, count, 0, &val); |
| if (ret) |
| return -EFAULT; |
| |
| adv7393_write(fbdev->client, val >> 8, val & 0xff); |
| |
| return count; |
| } |
| |
| static int __devinit bfin_adv7393_fb_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| int ret = 0; |
| struct proc_dir_entry *entry; |
| int num_modes = ARRAY_SIZE(known_modes); |
| |
| struct adv7393fb_device *fbdev = NULL; |
| |
| if (mem > 2) { |
| dev_err(&client->dev, "mem out of allowed range [1;2]\n"); |
| return -EINVAL; |
| } |
| |
| if (mode > num_modes) { |
| dev_err(&client->dev, "mode %d: not supported", mode); |
| return -EFAULT; |
| } |
| |
| fbdev = kzalloc(sizeof(*fbdev), GFP_KERNEL); |
| if (!fbdev) { |
| dev_err(&client->dev, "failed to allocate device private record"); |
| return -ENOMEM; |
| } |
| |
| i2c_set_clientdata(client, fbdev); |
| |
| fbdev->modes = known_modes; |
| fbdev->client = client; |
| |
| fbdev->fb_len = |
| mem * fbdev->modes[mode].xres * fbdev->modes[mode].xres * |
| (fbdev->modes[mode].bpp / 8); |
| |
| fbdev->line_len = |
| fbdev->modes[mode].xres * (fbdev->modes[mode].bpp / 8); |
| |
| /* Workaround "PPI Does Not Start Properly In Specific Mode" */ |
| if (ANOMALY_05000400) { |
| ret = gpio_request_one(P_IDENT(P_PPI0_FS3), GPIOF_OUT_INIT_LOW, |
| "PPI0_FS3") |
| if (ret) { |
| dev_err(&client->dev, "PPI0_FS3 GPIO request failed\n"); |
| ret = -EBUSY; |
| goto free_fbdev; |
| } |
| } |
| |
| if (peripheral_request_list(ppi_pins, DRIVER_NAME)) { |
| dev_err(&client->dev, "requesting PPI peripheral failed\n"); |
| ret = -EFAULT; |
| goto free_gpio; |
| } |
| |
| fbdev->fb_mem = |
| dma_alloc_coherent(NULL, fbdev->fb_len, &fbdev->dma_handle, |
| GFP_KERNEL); |
| |
| if (NULL == fbdev->fb_mem) { |
| dev_err(&client->dev, "couldn't allocate dma buffer (%d bytes)\n", |
| (u32) fbdev->fb_len); |
| ret = -ENOMEM; |
| goto free_ppi_pins; |
| } |
| |
| fbdev->info.screen_base = (void *)fbdev->fb_mem; |
| bfin_adv7393_fb_fix.smem_start = (int)fbdev->fb_mem; |
| |
| bfin_adv7393_fb_fix.smem_len = fbdev->fb_len; |
| bfin_adv7393_fb_fix.line_length = fbdev->line_len; |
| |
| if (mem > 1) |
| bfin_adv7393_fb_fix.ypanstep = 1; |
| |
| bfin_adv7393_fb_defined.red.length = 5; |
| bfin_adv7393_fb_defined.green.length = 6; |
| bfin_adv7393_fb_defined.blue.length = 5; |
| |
| bfin_adv7393_fb_defined.xres = fbdev->modes[mode].xres; |
| bfin_adv7393_fb_defined.yres = fbdev->modes[mode].yres; |
| bfin_adv7393_fb_defined.xres_virtual = fbdev->modes[mode].xres; |
| bfin_adv7393_fb_defined.yres_virtual = mem * fbdev->modes[mode].yres; |
| bfin_adv7393_fb_defined.bits_per_pixel = fbdev->modes[mode].bpp; |
| |
| fbdev->info.fbops = &bfin_adv7393_fb_ops; |
| fbdev->info.var = bfin_adv7393_fb_defined; |
| fbdev->info.fix = bfin_adv7393_fb_fix; |
| fbdev->info.par = &bfin_par; |
| fbdev->info.flags = FBINFO_DEFAULT; |
| |
| fbdev->info.pseudo_palette = kzalloc(sizeof(u32) * 16, GFP_KERNEL); |
| if (!fbdev->info.pseudo_palette) { |
| dev_err(&client->dev, "failed to allocate pseudo_palette\n"); |
| ret = -ENOMEM; |
| goto free_fb_mem; |
| } |
| |
| if (fb_alloc_cmap(&fbdev->info.cmap, BFIN_LCD_NBR_PALETTE_ENTRIES, 0) < 0) { |
| dev_err(&client->dev, "failed to allocate colormap (%d entries)\n", |
| BFIN_LCD_NBR_PALETTE_ENTRIES); |
| ret = -EFAULT; |
| goto free_palette; |
| } |
| |
| if (request_dma(CH_PPI, "BF5xx_PPI_DMA") < 0) { |
| dev_err(&client->dev, "unable to request PPI DMA\n"); |
| ret = -EFAULT; |
| goto free_cmap; |
| } |
| |
| if (request_irq(IRQ_PPI_ERROR, ppi_irq_error, 0, |
| "PPI ERROR", fbdev) < 0) { |
| dev_err(&client->dev, "unable to request PPI ERROR IRQ\n"); |
| ret = -EFAULT; |
| goto free_ch_ppi; |
| } |
| |
| fbdev->open = 0; |
| |
| ret = adv7393_write_block(client, fbdev->modes[mode].adv7393_i2c_initd, |
| fbdev->modes[mode].adv7393_i2c_initd_len); |
| |
| if (ret) { |
| dev_err(&client->dev, "i2c attach: init error\n"); |
| goto free_irq_ppi; |
| } |
| |
| |
| if (register_framebuffer(&fbdev->info) < 0) { |
| dev_err(&client->dev, "unable to register framebuffer\n"); |
| ret = -EFAULT; |
| goto free_irq_ppi; |
| } |
| |
| dev_info(&client->dev, "fb%d: %s frame buffer device\n", |
| fbdev->info.node, fbdev->info.fix.id); |
| dev_info(&client->dev, "fb memory address : 0x%p\n", fbdev->fb_mem); |
| |
| entry = create_proc_entry("driver/adv7393", 0, NULL); |
| if (!entry) { |
| dev_err(&client->dev, "unable to create /proc entry\n"); |
| ret = -EFAULT; |
| goto free_fb; |
| } |
| |
| entry->read_proc = adv7393_read_proc; |
| entry->write_proc = adv7393_write_proc; |
| entry->data = fbdev; |
| |
| return 0; |
| |
| free_fb: |
| unregister_framebuffer(&fbdev->info); |
| free_irq_ppi: |
| free_irq(IRQ_PPI_ERROR, fbdev); |
| free_ch_ppi: |
| free_dma(CH_PPI); |
| free_cmap: |
| fb_dealloc_cmap(&fbdev->info.cmap); |
| free_palette: |
| kfree(fbdev->info.pseudo_palette); |
| free_fb_mem: |
| dma_free_coherent(NULL, fbdev->fb_len, fbdev->fb_mem, |
| fbdev->dma_handle); |
| free_ppi_pins: |
| peripheral_free_list(ppi_pins); |
| free_gpio: |
| if (ANOMALY_05000400) |
| gpio_free(P_IDENT(P_PPI0_FS3)); |
| free_fbdev: |
| kfree(fbdev); |
| |
| return ret; |
| } |
| |
| static int bfin_adv7393_fb_open(struct fb_info *info, int user) |
| { |
| struct adv7393fb_device *fbdev = to_adv7393fb_device(info); |
| |
| fbdev->info.screen_base = (void *)fbdev->fb_mem; |
| if (!fbdev->info.screen_base) { |
| dev_err(&fbdev->client->dev, "unable to map device\n"); |
| return -ENOMEM; |
| } |
| |
| fbdev->open = 1; |
| dma_desc_list(fbdev, BUILD); |
| adv7393_mode(fbdev->client, BLANK_OFF); |
| bfin_config_ppi(fbdev); |
| bfin_config_dma(fbdev); |
| bfin_enable_ppi(); |
| |
| return 0; |
| } |
| |
| static int bfin_adv7393_fb_release(struct fb_info *info, int user) |
| { |
| struct adv7393fb_device *fbdev = to_adv7393fb_device(info); |
| |
| adv7393_mode(fbdev->client, BLANK_ON); |
| bfin_disable_dma(); |
| bfin_disable_ppi(); |
| dma_desc_list(fbdev, DESTRUCT); |
| fbdev->open = 0; |
| return 0; |
| } |
| |
| static int |
| bfin_adv7393_fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) |
| { |
| |
| switch (var->bits_per_pixel) { |
| case 16:/* DIRECTCOLOUR, 64k */ |
| var->red.offset = info->var.red.offset; |
| var->green.offset = info->var.green.offset; |
| var->blue.offset = info->var.blue.offset; |
| var->red.length = info->var.red.length; |
| var->green.length = info->var.green.length; |
| var->blue.length = info->var.blue.length; |
| var->transp.offset = 0; |
| var->transp.length = 0; |
| var->transp.msb_right = 0; |
| var->red.msb_right = 0; |
| var->green.msb_right = 0; |
| var->blue.msb_right = 0; |
| break; |
| default: |
| pr_debug("%s: depth not supported: %u BPP\n", __func__, |
| var->bits_per_pixel); |
| return -EINVAL; |
| } |
| |
| if (info->var.xres != var->xres || |
| info->var.yres != var->yres || |
| info->var.xres_virtual != var->xres_virtual || |
| info->var.yres_virtual != var->yres_virtual) { |
| pr_debug("%s: Resolution not supported: X%u x Y%u\n", |
| __func__, var->xres, var->yres); |
| return -EINVAL; |
| } |
| |
| /* |
| * Memory limit |
| */ |
| |
| if ((info->fix.line_length * var->yres_virtual) > info->fix.smem_len) { |
| pr_debug("%s: Memory Limit requested yres_virtual = %u\n", |
| __func__, var->yres_virtual); |
| return -ENOMEM; |
| } |
| |
| return 0; |
| } |
| |
| static int |
| bfin_adv7393_fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info) |
| { |
| int dy; |
| u32 dmaaddr; |
| struct adv7393fb_device *fbdev = to_adv7393fb_device(info); |
| |
| if (!var || !info) |
| return -EINVAL; |
| |
| if (var->xoffset - info->var.xoffset) { |
| /* No support for X panning for now! */ |
| return -EINVAL; |
| } |
| dy = var->yoffset - info->var.yoffset; |
| |
| if (dy) { |
| pr_debug("%s: Panning screen of %d lines\n", __func__, dy); |
| |
| dmaaddr = fbdev->av1->start_addr; |
| dmaaddr += (info->fix.line_length * dy); |
| /* TODO: Wait for current frame to finished */ |
| |
| fbdev->av1->start_addr = (unsigned long)dmaaddr; |
| fbdev->av2->start_addr = (unsigned long)dmaaddr + fbdev->line_len; |
| } |
| |
| return 0; |
| |
| } |
| |
| /* 0 unblank, 1 blank, 2 no vsync, 3 no hsync, 4 off */ |
| static int bfin_adv7393_fb_blank(int blank, struct fb_info *info) |
| { |
| struct adv7393fb_device *fbdev = to_adv7393fb_device(info); |
| |
| switch (blank) { |
| |
| case VESA_NO_BLANKING: |
| /* Turn on panel */ |
| adv7393_mode(fbdev->client, BLANK_OFF); |
| break; |
| |
| case VESA_VSYNC_SUSPEND: |
| case VESA_HSYNC_SUSPEND: |
| case VESA_POWERDOWN: |
| /* Turn off panel */ |
| adv7393_mode(fbdev->client, BLANK_ON); |
| break; |
| |
| default: |
| return -EINVAL; |
| break; |
| } |
| return 0; |
| } |
| |
| int bfin_adv7393_fb_cursor(struct fb_info *info, struct fb_cursor *cursor) |
| { |
| if (nocursor) |
| return 0; |
| else |
| return -EINVAL; /* just to force soft_cursor() call */ |
| } |
| |
| static int bfin_adv7393_fb_setcolreg(u_int regno, u_int red, u_int green, |
| u_int blue, u_int transp, |
| struct fb_info *info) |
| { |
| if (regno >= BFIN_LCD_NBR_PALETTE_ENTRIES) |
| return -EINVAL; |
| |
| if (info->var.grayscale) |
| /* grayscale = 0.30*R + 0.59*G + 0.11*B */ |
| red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8; |
| |
| if (info->fix.visual == FB_VISUAL_TRUECOLOR) { |
| u32 value; |
| /* Place color in the pseudopalette */ |
| if (regno > 16) |
| return -EINVAL; |
| |
| red >>= (16 - info->var.red.length); |
| green >>= (16 - info->var.green.length); |
| blue >>= (16 - info->var.blue.length); |
| |
| value = (red << info->var.red.offset) | |
| (green << info->var.green.offset)| |
| (blue << info->var.blue.offset); |
| value &= 0xFFFF; |
| |
| ((u32 *) (info->pseudo_palette))[regno] = value; |
| } |
| |
| return 0; |
| } |
| |
| static int __devexit bfin_adv7393_fb_remove(struct i2c_client *client) |
| { |
| struct adv7393fb_device *fbdev = i2c_get_clientdata(client); |
| |
| adv7393_mode(client, POWER_DOWN); |
| |
| if (fbdev->fb_mem) |
| dma_free_coherent(NULL, fbdev->fb_len, fbdev->fb_mem, fbdev->dma_handle); |
| free_dma(CH_PPI); |
| free_irq(IRQ_PPI_ERROR, fbdev); |
| unregister_framebuffer(&fbdev->info); |
| remove_proc_entry("driver/adv7393", NULL); |
| fb_dealloc_cmap(&fbdev->info.cmap); |
| kfree(fbdev->info.pseudo_palette); |
| |
| if (ANOMALY_05000400) |
| gpio_free(P_IDENT(P_PPI0_FS3)); /* FS3 */ |
| peripheral_free_list(ppi_pins); |
| kfree(fbdev); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int bfin_adv7393_fb_suspend(struct device *dev) |
| { |
| struct adv7393fb_device *fbdev = dev_get_drvdata(dev); |
| |
| if (fbdev->open) { |
| bfin_disable_dma(); |
| bfin_disable_ppi(); |
| dma_desc_list(fbdev, DESTRUCT); |
| } |
| adv7393_mode(fbdev->client, POWER_DOWN); |
| |
| return 0; |
| } |
| |
| static int bfin_adv7393_fb_resume(struct device *dev) |
| { |
| struct adv7393fb_device *fbdev = dev_get_drvdata(dev); |
| |
| adv7393_mode(fbdev->client, POWER_ON); |
| |
| if (fbdev->open) { |
| dma_desc_list(fbdev, BUILD); |
| bfin_config_ppi(fbdev); |
| bfin_config_dma(fbdev); |
| bfin_enable_ppi(); |
| } |
| |
| return 0; |
| } |
| |
| static const struct dev_pm_ops bfin_adv7393_dev_pm_ops = { |
| .suspend = bfin_adv7393_fb_suspend, |
| .resume = bfin_adv7393_fb_resume, |
| }; |
| #endif |
| |
| static const struct i2c_device_id bfin_adv7393_id[] = { |
| {DRIVER_NAME, 0}, |
| {} |
| }; |
| |
| MODULE_DEVICE_TABLE(i2c, bfin_adv7393_id); |
| |
| static struct i2c_driver bfin_adv7393_fb_driver = { |
| .driver = { |
| .name = DRIVER_NAME, |
| #ifdef CONFIG_PM |
| .pm = &bfin_adv7393_dev_pm_ops, |
| #endif |
| }, |
| .probe = bfin_adv7393_fb_probe, |
| .remove = __devexit_p(bfin_adv7393_fb_remove), |
| .id_table = bfin_adv7393_id, |
| }; |
| |
| static int __init bfin_adv7393_fb_driver_init(void) |
| { |
| #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) |
| request_module("i2c-bfin-twi"); |
| #else |
| request_module("i2c-gpio"); |
| #endif |
| |
| return i2c_add_driver(&bfin_adv7393_fb_driver); |
| } |
| module_init(bfin_adv7393_fb_driver_init); |
| |
| static void __exit bfin_adv7393_fb_driver_cleanup(void) |
| { |
| i2c_del_driver(&bfin_adv7393_fb_driver); |
| } |
| module_exit(bfin_adv7393_fb_driver_cleanup); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); |
| MODULE_DESCRIPTION("Frame buffer driver for ADV7393/2 Video Encoder"); |
| |
| module_param(mode, int, 0); |
| MODULE_PARM_DESC(mode, |
| "Video Mode (0=NTSC,1=PAL,2=NTSC 640x480,3=PAL 640x480,4=NTSC YCbCr input,5=PAL YCbCr input)"); |
| |
| module_param(mem, int, 0); |
| MODULE_PARM_DESC(mem, |
| "Size of frame buffer memory 1=Single 2=Double Size (allows y-panning / frame stacking)"); |
| |
| module_param(nocursor, int, 0644); |
| MODULE_PARM_DESC(nocursor, "cursor enable/disable"); |