isdn: whitespace coding style cleanup
isdn source code uses a not-current coding style.
Update the coding style used on a per-line basis
so that git diff -w shows only elided blank lines
at EOF.
Done with emacs and some scripts and some typing.
Built x86 allyesconfig.
No detected change in objdump -d or size.
Signed-off-by: Joe Perches <joe@perches.com>
diff --git a/drivers/isdn/act2000/capi.c b/drivers/isdn/act2000/capi.c
index 1f0a949..3f66ca2 100644
--- a/drivers/isdn/act2000/capi.c
+++ b/drivers/isdn/act2000/capi.c
@@ -5,7 +5,7 @@
*
* Author Fritz Elfert
* Copyright by Fritz Elfert <fritz@isdn4linux.de>
- *
+ *
* This software may be used and distributed according to the terms
* of the GNU General Public License, incorporated herein by reference.
*
@@ -64,14 +64,14 @@
{{ 0x86, 0x00}, "DATA_B3_REQ"},
{{ 0xff, 0x00}, "MANUFACTURER_REQ"},
/* Responses */
- {{ 0x01, 0x03}, "RESET_B3_RESP"},
- {{ 0x02, 0x03}, "CONNECT_RESP"},
- {{ 0x03, 0x03}, "CONNECT_ACTIVE_RESP"},
- {{ 0x04, 0x03}, "DISCONNECT_RESP"},
- {{ 0x07, 0x03}, "INFO_RESP"},
- {{ 0x08, 0x03}, "DATA_RESP"},
- {{ 0x82, 0x03}, "CONNECT_B3_RESP"},
- {{ 0x83, 0x03}, "CONNECT_B3_ACTIVE_RESP"},
+ {{ 0x01, 0x03}, "RESET_B3_RESP"},
+ {{ 0x02, 0x03}, "CONNECT_RESP"},
+ {{ 0x03, 0x03}, "CONNECT_ACTIVE_RESP"},
+ {{ 0x04, 0x03}, "DISCONNECT_RESP"},
+ {{ 0x07, 0x03}, "INFO_RESP"},
+ {{ 0x08, 0x03}, "DATA_RESP"},
+ {{ 0x82, 0x03}, "CONNECT_B3_RESP"},
+ {{ 0x83, 0x03}, "CONNECT_B3_ACTIVE_RESP"},
{{ 0x84, 0x03}, "DISCONNECT_B3_RESP"},
{{ 0x86, 0x03}, "DATA_B3_RESP"},
{{ 0xff, 0x03}, "MANUFACTURER_RESP"},
@@ -88,7 +88,7 @@
* 2 = Valid message, B-Channel-data
*/
int
-actcapi_chkhdr(act2000_card * card, actcapi_msghdr *hdr)
+actcapi_chkhdr(act2000_card *card, actcapi_msghdr *hdr)
{
int i;
@@ -99,33 +99,33 @@
for (i = 0; i < num_valid_imsg; i++)
if ((hdr->cmd.cmd == valid_msg[i].cmd.cmd) &&
(hdr->cmd.subcmd == valid_msg[i].cmd.subcmd)) {
- return (i?1:2);
+ return (i ? 1 : 2);
}
return 0;
}
-#define ACTCAPI_MKHDR(l, c, s) { \
- skb = alloc_skb(l + 8, GFP_ATOMIC); \
- if (skb) { \
- m = (actcapi_msg *)skb_put(skb, l + 8); \
- m->hdr.len = l + 8; \
- m->hdr.applicationID = 1; \
- m->hdr.cmd.cmd = c; \
- m->hdr.cmd.subcmd = s; \
- m->hdr.msgnum = actcapi_nextsmsg(card); \
- } else m = NULL;\
-}
+#define ACTCAPI_MKHDR(l, c, s) { \
+ skb = alloc_skb(l + 8, GFP_ATOMIC); \
+ if (skb) { \
+ m = (actcapi_msg *)skb_put(skb, l + 8); \
+ m->hdr.len = l + 8; \
+ m->hdr.applicationID = 1; \
+ m->hdr.cmd.cmd = c; \
+ m->hdr.cmd.subcmd = s; \
+ m->hdr.msgnum = actcapi_nextsmsg(card); \
+ } else m = NULL; \
+ }
-#define ACTCAPI_CHKSKB if (!skb) { \
- printk(KERN_WARNING "actcapi: alloc_skb failed\n"); \
- return; \
-}
+#define ACTCAPI_CHKSKB if (!skb) { \
+ printk(KERN_WARNING "actcapi: alloc_skb failed\n"); \
+ return; \
+ }
-#define ACTCAPI_QUEUE_TX { \
- actcapi_debug_msg(skb, 1); \
- skb_queue_tail(&card->sndq, skb); \
- act2000_schedule_tx(card); \
-}
+#define ACTCAPI_QUEUE_TX { \
+ actcapi_debug_msg(skb, 1); \
+ skb_queue_tail(&card->sndq, skb); \
+ act2000_schedule_tx(card); \
+ }
int
actcapi_listen_req(act2000_card *card)
@@ -138,16 +138,16 @@
for (i = 0; i < ACT2000_BCH; i++)
eazmask |= card->bch[i].eazmask;
ACTCAPI_MKHDR(9, 0x05, 0x00);
- if (!skb) {
- printk(KERN_WARNING "actcapi: alloc_skb failed\n");
- return -ENOMEM;
- }
+ if (!skb) {
+ printk(KERN_WARNING "actcapi: alloc_skb failed\n");
+ return -ENOMEM;
+ }
m->msg.listen_req.controller = 0;
m->msg.listen_req.infomask = 0x3f; /* All information */
m->msg.listen_req.eazmask = eazmask;
- m->msg.listen_req.simask = (eazmask)?0x86:0; /* All SI's */
+ m->msg.listen_req.simask = (eazmask) ? 0x86 : 0; /* All SI's */
ACTCAPI_QUEUE_TX;
- return 0;
+ return 0;
}
int
@@ -159,7 +159,7 @@
ACTCAPI_MKHDR((11 + strlen(phone)), 0x02, 0x00);
if (!skb) {
- printk(KERN_WARNING "actcapi: alloc_skb failed\n");
+ printk(KERN_WARNING "actcapi: alloc_skb failed\n");
chan->fsm_state = ACT2000_STATE_NULL;
return -ENOMEM;
}
@@ -168,7 +168,7 @@
m->msg.connect_req.infomask = 0x3f;
m->msg.connect_req.si1 = si1;
m->msg.connect_req.si2 = si2;
- m->msg.connect_req.eaz = eaz?eaz:'0';
+ m->msg.connect_req.eaz = eaz ? eaz : '0';
m->msg.connect_req.addr.len = strlen(phone) + 1;
m->msg.connect_req.addr.tnp = 0x81;
memcpy(m->msg.connect_req.addr.num, phone, strlen(phone));
@@ -203,21 +203,21 @@
struct sk_buff *skb;
ACTCAPI_MKHDR(5, 0xff, 0x00);
- if (!skb) {
- printk(KERN_WARNING "actcapi: alloc_skb failed\n");
- return -ENOMEM;
- }
+ if (!skb) {
+ printk(KERN_WARNING "actcapi: alloc_skb failed\n");
+ return -ENOMEM;
+ }
m->msg.manufacturer_req_net.manuf_msg = 0x11;
m->msg.manufacturer_req_net.controller = 1;
- m->msg.manufacturer_req_net.nettype = (card->ptype == ISDN_PTYPE_EURO)?1:0;
+ m->msg.manufacturer_req_net.nettype = (card->ptype == ISDN_PTYPE_EURO) ? 1 : 0;
ACTCAPI_QUEUE_TX;
printk(KERN_INFO "act2000 %s: D-channel protocol now %s\n",
- card->interface.id, (card->ptype == ISDN_PTYPE_EURO)?"euro":"1tr6");
+ card->interface.id, (card->ptype == ISDN_PTYPE_EURO) ? "euro" : "1tr6");
card->interface.features &=
~(ISDN_FEATURE_P_UNKNOWN | ISDN_FEATURE_P_EURO | ISDN_FEATURE_P_1TR6);
card->interface.features |=
- ((card->ptype == ISDN_PTYPE_EURO)?ISDN_FEATURE_P_EURO:ISDN_FEATURE_P_1TR6);
- return 0;
+ ((card->ptype == ISDN_PTYPE_EURO) ? ISDN_FEATURE_P_EURO : ISDN_FEATURE_P_1TR6);
+ return 0;
}
/*
@@ -231,16 +231,16 @@
struct sk_buff *skb;
ACTCAPI_MKHDR(8, 0xff, 0x00);
- if (!skb) {
+ if (!skb) {
- printk(KERN_WARNING "actcapi: alloc_skb failed\n");
- return -ENOMEM;
- }
+ printk(KERN_WARNING "actcapi: alloc_skb failed\n");
+ return -ENOMEM;
+ }
m->msg.manufacturer_req_v42.manuf_msg = 0x10;
m->msg.manufacturer_req_v42.controller = 0;
- m->msg.manufacturer_req_v42.v42control = (arg?1:0);
+ m->msg.manufacturer_req_v42.v42control = (arg ? 1 : 0);
ACTCAPI_QUEUE_TX;
- return 0;
+ return 0;
}
#endif /* 0 */
@@ -254,15 +254,15 @@
struct sk_buff *skb;
ACTCAPI_MKHDR(4, 0xff, 0x00);
- if (!skb) {
+ if (!skb) {
- printk(KERN_WARNING "actcapi: alloc_skb failed\n");
- return -ENOMEM;
- }
+ printk(KERN_WARNING "actcapi: alloc_skb failed\n");
+ return -ENOMEM;
+ }
m->msg.manufacturer_req_err.manuf_msg = 0x03;
m->msg.manufacturer_req_err.controller = 0;
ACTCAPI_QUEUE_TX;
- return 0;
+ return 0;
}
/*
@@ -295,7 +295,7 @@
}
p = p->next;
}
- return 0;
+ return 0;
}
void
@@ -311,24 +311,24 @@
sizeof(m->msg.select_b2_protocol_req.dlpd));
m->msg.select_b2_protocol_req.dlpd.len = 6;
switch (chan->l2prot) {
- case ISDN_PROTO_L2_TRANS:
- m->msg.select_b2_protocol_req.protocol = 0x03;
- m->msg.select_b2_protocol_req.dlpd.dlen = 4000;
- break;
- case ISDN_PROTO_L2_HDLC:
- m->msg.select_b2_protocol_req.protocol = 0x02;
- m->msg.select_b2_protocol_req.dlpd.dlen = 4000;
- break;
- case ISDN_PROTO_L2_X75I:
- case ISDN_PROTO_L2_X75UI:
- case ISDN_PROTO_L2_X75BUI:
- m->msg.select_b2_protocol_req.protocol = 0x01;
- m->msg.select_b2_protocol_req.dlpd.dlen = 4000;
- m->msg.select_b2_protocol_req.dlpd.laa = 3;
- m->msg.select_b2_protocol_req.dlpd.lab = 1;
- m->msg.select_b2_protocol_req.dlpd.win = 7;
- m->msg.select_b2_protocol_req.dlpd.modulo = 8;
- break;
+ case ISDN_PROTO_L2_TRANS:
+ m->msg.select_b2_protocol_req.protocol = 0x03;
+ m->msg.select_b2_protocol_req.dlpd.dlen = 4000;
+ break;
+ case ISDN_PROTO_L2_HDLC:
+ m->msg.select_b2_protocol_req.protocol = 0x02;
+ m->msg.select_b2_protocol_req.dlpd.dlen = 4000;
+ break;
+ case ISDN_PROTO_L2_X75I:
+ case ISDN_PROTO_L2_X75UI:
+ case ISDN_PROTO_L2_X75BUI:
+ m->msg.select_b2_protocol_req.protocol = 0x01;
+ m->msg.select_b2_protocol_req.dlpd.dlen = 4000;
+ m->msg.select_b2_protocol_req.dlpd.laa = 3;
+ m->msg.select_b2_protocol_req.dlpd.lab = 1;
+ m->msg.select_b2_protocol_req.dlpd.win = 7;
+ m->msg.select_b2_protocol_req.dlpd.modulo = 8;
+ break;
}
ACTCAPI_QUEUE_TX;
}
@@ -345,11 +345,11 @@
memset(&m->msg.select_b3_protocol_req.ncpd, 0,
sizeof(m->msg.select_b3_protocol_req.ncpd));
switch (chan->l3prot) {
- case ISDN_PROTO_L3_TRANS:
- m->msg.select_b3_protocol_req.protocol = 0x04;
- m->msg.select_b3_protocol_req.ncpd.len = 13;
- m->msg.select_b3_protocol_req.ncpd.modulo = 8;
- break;
+ case ISDN_PROTO_L3_TRANS:
+ m->msg.select_b3_protocol_req.protocol = 0x04;
+ m->msg.select_b3_protocol_req.ncpd.len = 13;
+ m->msg.select_b3_protocol_req.ncpd.modulo = 8;
+ break;
}
ACTCAPI_QUEUE_TX;
}
@@ -434,7 +434,7 @@
actcapi_msg *m;
struct sk_buff *skb;
- ACTCAPI_MKHDR((rejectcause?3:17), 0x82, 0x03);
+ ACTCAPI_MKHDR((rejectcause ? 3 : 17), 0x82, 0x03);
ACTCAPI_CHKSKB;
m->msg.connect_b3_resp.ncci = chan->ncci;
m->msg.connect_b3_resp.rejectcause = rejectcause;
@@ -563,10 +563,10 @@
blocknr = msg->msg.data_b3_ind.blocknr;
skb_pull(skb, 19);
card->interface.rcvcallb_skb(card->myid, chan, skb);
- if (!(skb = alloc_skb(11, GFP_ATOMIC))) {
- printk(KERN_WARNING "actcapi: alloc_skb failed\n");
- return 1;
- }
+ if (!(skb = alloc_skb(11, GFP_ATOMIC))) {
+ printk(KERN_WARNING "actcapi: alloc_skb failed\n");
+ return 1;
+ }
msg = (actcapi_msg *)skb_put(skb, 11);
msg->hdr.len = 11;
msg->hdr.applicationID = 1;
@@ -595,34 +595,34 @@
spin_lock_irqsave(&card->lock, flags);
skb = skb_peek(&card->ackq);
spin_unlock_irqrestore(&card->lock, flags);
- if (!skb) {
+ if (!skb) {
printk(KERN_WARNING "act2000: handle_ack nothing found!\n");
return 0;
}
- tmp = skb;
- while (1) {
- m = (actcapi_msg *)tmp->data;
- if ((((m->msg.data_b3_req.fakencci >> 8) & 0xff) == chan->ncci) &&
+ tmp = skb;
+ while (1) {
+ m = (actcapi_msg *)tmp->data;
+ if ((((m->msg.data_b3_req.fakencci >> 8) & 0xff) == chan->ncci) &&
(m->msg.data_b3_req.blocknr == blocknr)) {
/* found corresponding DATA_B3_REQ */
- skb_unlink(tmp, &card->ackq);
+ skb_unlink(tmp, &card->ackq);
chan->queued -= m->msg.data_b3_req.datalen;
if (m->msg.data_b3_req.flags)
ret = m->msg.data_b3_req.datalen;
dev_kfree_skb(tmp);
if (chan->queued < 0)
chan->queued = 0;
- return ret;
- }
- spin_lock_irqsave(&card->lock, flags);
- tmp = skb_peek((struct sk_buff_head *)tmp);
- spin_unlock_irqrestore(&card->lock, flags);
- if ((tmp == skb) || (tmp == NULL)) {
+ return ret;
+ }
+ spin_lock_irqsave(&card->lock, flags);
+ tmp = skb_peek((struct sk_buff_head *)tmp);
+ spin_unlock_irqrestore(&card->lock, flags);
+ if ((tmp == skb) || (tmp == NULL)) {
/* reached end of queue */
printk(KERN_WARNING "act2000: handle_ack nothing found!\n");
- return 0;
+ return 0;
}
- }
+ }
}
void
@@ -644,294 +644,294 @@
msg = (actcapi_msg *)skb->data;
ccmd = ((msg->hdr.cmd.cmd << 8) | msg->hdr.cmd.subcmd);
switch (ccmd) {
- case 0x8602:
- /* DATA_B3_IND */
- if (actcapi_data_b3_ind(card, skb))
- return;
- break;
- case 0x8601:
- /* DATA_B3_CONF */
- chan = find_ncci(card, msg->msg.data_b3_conf.ncci);
- if ((chan >= 0) && (card->bch[chan].fsm_state == ACT2000_STATE_ACTIVE)) {
- if (msg->msg.data_b3_conf.info != 0)
- printk(KERN_WARNING "act2000: DATA_B3_CONF: %04x\n",
- msg->msg.data_b3_conf.info);
- len = handle_ack(card, &card->bch[chan],
- msg->msg.data_b3_conf.blocknr);
- if (len) {
- cmd.driver = card->myid;
- cmd.command = ISDN_STAT_BSENT;
- cmd.arg = chan;
- cmd.parm.length = len;
- card->interface.statcallb(&cmd);
- }
+ case 0x8602:
+ /* DATA_B3_IND */
+ if (actcapi_data_b3_ind(card, skb))
+ return;
+ break;
+ case 0x8601:
+ /* DATA_B3_CONF */
+ chan = find_ncci(card, msg->msg.data_b3_conf.ncci);
+ if ((chan >= 0) && (card->bch[chan].fsm_state == ACT2000_STATE_ACTIVE)) {
+ if (msg->msg.data_b3_conf.info != 0)
+ printk(KERN_WARNING "act2000: DATA_B3_CONF: %04x\n",
+ msg->msg.data_b3_conf.info);
+ len = handle_ack(card, &card->bch[chan],
+ msg->msg.data_b3_conf.blocknr);
+ if (len) {
+ cmd.driver = card->myid;
+ cmd.command = ISDN_STAT_BSENT;
+ cmd.arg = chan;
+ cmd.parm.length = len;
+ card->interface.statcallb(&cmd);
}
- break;
- case 0x0201:
- /* CONNECT_CONF */
- chan = find_dialing(card, msg->hdr.msgnum);
- if (chan >= 0) {
- if (msg->msg.connect_conf.info) {
- card->bch[chan].fsm_state = ACT2000_STATE_NULL;
+ }
+ break;
+ case 0x0201:
+ /* CONNECT_CONF */
+ chan = find_dialing(card, msg->hdr.msgnum);
+ if (chan >= 0) {
+ if (msg->msg.connect_conf.info) {
+ card->bch[chan].fsm_state = ACT2000_STATE_NULL;
+ cmd.driver = card->myid;
+ cmd.command = ISDN_STAT_DHUP;
+ cmd.arg = chan;
+ card->interface.statcallb(&cmd);
+ } else {
+ card->bch[chan].fsm_state = ACT2000_STATE_OWAIT;
+ card->bch[chan].plci = msg->msg.connect_conf.plci;
+ }
+ }
+ break;
+ case 0x0202:
+ /* CONNECT_IND */
+ chan = new_plci(card, msg->msg.connect_ind.plci);
+ if (chan < 0) {
+ ctmp = (act2000_chan *)tmp;
+ ctmp->plci = msg->msg.connect_ind.plci;
+ actcapi_connect_resp(card, ctmp, 0x11); /* All Card-Cannels busy */
+ } else {
+ card->bch[chan].fsm_state = ACT2000_STATE_ICALL;
+ cmd.driver = card->myid;
+ cmd.command = ISDN_STAT_ICALL;
+ cmd.arg = chan;
+ cmd.parm.setup.si1 = msg->msg.connect_ind.si1;
+ cmd.parm.setup.si2 = msg->msg.connect_ind.si2;
+ if (card->ptype == ISDN_PTYPE_EURO)
+ strcpy(cmd.parm.setup.eazmsn,
+ act2000_find_eaz(card, msg->msg.connect_ind.eaz));
+ else {
+ cmd.parm.setup.eazmsn[0] = msg->msg.connect_ind.eaz;
+ cmd.parm.setup.eazmsn[1] = 0;
+ }
+ memset(cmd.parm.setup.phone, 0, sizeof(cmd.parm.setup.phone));
+ memcpy(cmd.parm.setup.phone, msg->msg.connect_ind.addr.num,
+ msg->msg.connect_ind.addr.len - 1);
+ cmd.parm.setup.plan = msg->msg.connect_ind.addr.tnp;
+ cmd.parm.setup.screen = 0;
+ if (card->interface.statcallb(&cmd) == 2)
+ actcapi_connect_resp(card, &card->bch[chan], 0x15); /* Reject Call */
+ }
+ break;
+ case 0x0302:
+ /* CONNECT_ACTIVE_IND */
+ chan = find_plci(card, msg->msg.connect_active_ind.plci);
+ if (chan >= 0)
+ switch (card->bch[chan].fsm_state) {
+ case ACT2000_STATE_IWAIT:
+ actcapi_connect_active_resp(card, &card->bch[chan]);
+ break;
+ case ACT2000_STATE_OWAIT:
+ actcapi_connect_active_resp(card, &card->bch[chan]);
+ actcapi_select_b2_protocol_req(card, &card->bch[chan]);
+ break;
+ }
+ break;
+ case 0x8202:
+ /* CONNECT_B3_IND */
+ chan = find_plci(card, msg->msg.connect_b3_ind.plci);
+ if ((chan >= 0) && (card->bch[chan].fsm_state == ACT2000_STATE_IBWAIT)) {
+ card->bch[chan].ncci = msg->msg.connect_b3_ind.ncci;
+ actcapi_connect_b3_resp(card, &card->bch[chan], 0);
+ } else {
+ ctmp = (act2000_chan *)tmp;
+ ctmp->ncci = msg->msg.connect_b3_ind.ncci;
+ actcapi_connect_b3_resp(card, ctmp, 0x11); /* All Card-Cannels busy */
+ }
+ break;
+ case 0x8302:
+ /* CONNECT_B3_ACTIVE_IND */
+ chan = find_ncci(card, msg->msg.connect_b3_active_ind.ncci);
+ if ((chan >= 0) && (card->bch[chan].fsm_state == ACT2000_STATE_BWAIT)) {
+ actcapi_connect_b3_active_resp(card, &card->bch[chan]);
+ cmd.driver = card->myid;
+ cmd.command = ISDN_STAT_BCONN;
+ cmd.arg = chan;
+ card->interface.statcallb(&cmd);
+ }
+ break;
+ case 0x8402:
+ /* DISCONNECT_B3_IND */
+ chan = find_ncci(card, msg->msg.disconnect_b3_ind.ncci);
+ if (chan >= 0) {
+ ctmp = &card->bch[chan];
+ actcapi_disconnect_b3_resp(card, ctmp);
+ switch (ctmp->fsm_state) {
+ case ACT2000_STATE_ACTIVE:
+ ctmp->fsm_state = ACT2000_STATE_DHWAIT2;
+ cmd.driver = card->myid;
+ cmd.command = ISDN_STAT_BHUP;
+ cmd.arg = chan;
+ card->interface.statcallb(&cmd);
+ break;
+ case ACT2000_STATE_BHWAIT2:
+ actcapi_disconnect_req(card, ctmp);
+ ctmp->fsm_state = ACT2000_STATE_DHWAIT;
+ cmd.driver = card->myid;
+ cmd.command = ISDN_STAT_BHUP;
+ cmd.arg = chan;
+ card->interface.statcallb(&cmd);
+ break;
+ }
+ }
+ break;
+ case 0x0402:
+ /* DISCONNECT_IND */
+ chan = find_plci(card, msg->msg.disconnect_ind.plci);
+ if (chan >= 0) {
+ ctmp = &card->bch[chan];
+ actcapi_disconnect_resp(card, ctmp);
+ ctmp->fsm_state = ACT2000_STATE_NULL;
+ cmd.driver = card->myid;
+ cmd.command = ISDN_STAT_DHUP;
+ cmd.arg = chan;
+ card->interface.statcallb(&cmd);
+ } else {
+ ctmp = (act2000_chan *)tmp;
+ ctmp->plci = msg->msg.disconnect_ind.plci;
+ actcapi_disconnect_resp(card, ctmp);
+ }
+ break;
+ case 0x4001:
+ /* SELECT_B2_PROTOCOL_CONF */
+ chan = find_plci(card, msg->msg.select_b2_protocol_conf.plci);
+ if (chan >= 0)
+ switch (card->bch[chan].fsm_state) {
+ case ACT2000_STATE_ICALL:
+ case ACT2000_STATE_OWAIT:
+ ctmp = &card->bch[chan];
+ if (msg->msg.select_b2_protocol_conf.info == 0)
+ actcapi_select_b3_protocol_req(card, ctmp);
+ else {
+ ctmp->fsm_state = ACT2000_STATE_NULL;
cmd.driver = card->myid;
cmd.command = ISDN_STAT_DHUP;
cmd.arg = chan;
card->interface.statcallb(&cmd);
- } else {
- card->bch[chan].fsm_state = ACT2000_STATE_OWAIT;
- card->bch[chan].plci = msg->msg.connect_conf.plci;
}
+ break;
}
- break;
- case 0x0202:
- /* CONNECT_IND */
- chan = new_plci(card, msg->msg.connect_ind.plci);
- if (chan < 0) {
- ctmp = (act2000_chan *)tmp;
- ctmp->plci = msg->msg.connect_ind.plci;
- actcapi_connect_resp(card, ctmp, 0x11); /* All Card-Cannels busy */
- } else {
- card->bch[chan].fsm_state = ACT2000_STATE_ICALL;
- cmd.driver = card->myid;
- cmd.command = ISDN_STAT_ICALL;
- cmd.arg = chan;
- cmd.parm.setup.si1 = msg->msg.connect_ind.si1;
- cmd.parm.setup.si2 = msg->msg.connect_ind.si2;
- if (card->ptype == ISDN_PTYPE_EURO)
- strcpy(cmd.parm.setup.eazmsn,
- act2000_find_eaz(card, msg->msg.connect_ind.eaz));
+ break;
+ case 0x8001:
+ /* SELECT_B3_PROTOCOL_CONF */
+ chan = find_plci(card, msg->msg.select_b3_protocol_conf.plci);
+ if (chan >= 0)
+ switch (card->bch[chan].fsm_state) {
+ case ACT2000_STATE_ICALL:
+ case ACT2000_STATE_OWAIT:
+ ctmp = &card->bch[chan];
+ if (msg->msg.select_b3_protocol_conf.info == 0)
+ actcapi_listen_b3_req(card, ctmp);
else {
- cmd.parm.setup.eazmsn[0] = msg->msg.connect_ind.eaz;
- cmd.parm.setup.eazmsn[1] = 0;
+ ctmp->fsm_state = ACT2000_STATE_NULL;
+ cmd.driver = card->myid;
+ cmd.command = ISDN_STAT_DHUP;
+ cmd.arg = chan;
+ card->interface.statcallb(&cmd);
}
- memset(cmd.parm.setup.phone, 0, sizeof(cmd.parm.setup.phone));
- memcpy(cmd.parm.setup.phone, msg->msg.connect_ind.addr.num,
- msg->msg.connect_ind.addr.len - 1);
- cmd.parm.setup.plan = msg->msg.connect_ind.addr.tnp;
- cmd.parm.setup.screen = 0;
- if (card->interface.statcallb(&cmd) == 2)
- actcapi_connect_resp(card, &card->bch[chan], 0x15); /* Reject Call */
}
- break;
- case 0x0302:
- /* CONNECT_ACTIVE_IND */
- chan = find_plci(card, msg->msg.connect_active_ind.plci);
- if (chan >= 0)
- switch (card->bch[chan].fsm_state) {
- case ACT2000_STATE_IWAIT:
- actcapi_connect_active_resp(card, &card->bch[chan]);
- break;
- case ACT2000_STATE_OWAIT:
- actcapi_connect_active_resp(card, &card->bch[chan]);
- actcapi_select_b2_protocol_req(card, &card->bch[chan]);
- break;
- }
- break;
- case 0x8202:
- /* CONNECT_B3_IND */
- chan = find_plci(card, msg->msg.connect_b3_ind.plci);
- if ((chan >= 0) && (card->bch[chan].fsm_state == ACT2000_STATE_IBWAIT)) {
- card->bch[chan].ncci = msg->msg.connect_b3_ind.ncci;
- actcapi_connect_b3_resp(card, &card->bch[chan], 0);
- } else {
- ctmp = (act2000_chan *)tmp;
- ctmp->ncci = msg->msg.connect_b3_ind.ncci;
- actcapi_connect_b3_resp(card, ctmp, 0x11); /* All Card-Cannels busy */
- }
- break;
- case 0x8302:
- /* CONNECT_B3_ACTIVE_IND */
- chan = find_ncci(card, msg->msg.connect_b3_active_ind.ncci);
- if ((chan >= 0) && (card->bch[chan].fsm_state == ACT2000_STATE_BWAIT)) {
- actcapi_connect_b3_active_resp(card, &card->bch[chan]);
- cmd.driver = card->myid;
- cmd.command = ISDN_STAT_BCONN;
- cmd.arg = chan;
- card->interface.statcallb(&cmd);
- }
- break;
- case 0x8402:
- /* DISCONNECT_B3_IND */
- chan = find_ncci(card, msg->msg.disconnect_b3_ind.ncci);
- if (chan >= 0) {
+ break;
+ case 0x8101:
+ /* LISTEN_B3_CONF */
+ chan = find_plci(card, msg->msg.listen_b3_conf.plci);
+ if (chan >= 0)
+ switch (card->bch[chan].fsm_state) {
+ case ACT2000_STATE_ICALL:
ctmp = &card->bch[chan];
- actcapi_disconnect_b3_resp(card, ctmp);
- switch (ctmp->fsm_state) {
- case ACT2000_STATE_ACTIVE:
- ctmp->fsm_state = ACT2000_STATE_DHWAIT2;
- cmd.driver = card->myid;
- cmd.command = ISDN_STAT_BHUP;
- cmd.arg = chan;
- card->interface.statcallb(&cmd);
- break;
- case ACT2000_STATE_BHWAIT2:
- actcapi_disconnect_req(card, ctmp);
- ctmp->fsm_state = ACT2000_STATE_DHWAIT;
- cmd.driver = card->myid;
- cmd.command = ISDN_STAT_BHUP;
- cmd.arg = chan;
- card->interface.statcallb(&cmd);
- break;
+ if (msg->msg.listen_b3_conf.info == 0)
+ actcapi_connect_resp(card, ctmp, 0);
+ else {
+ ctmp->fsm_state = ACT2000_STATE_NULL;
+ cmd.driver = card->myid;
+ cmd.command = ISDN_STAT_DHUP;
+ cmd.arg = chan;
+ card->interface.statcallb(&cmd);
}
- }
- break;
- case 0x0402:
- /* DISCONNECT_IND */
- chan = find_plci(card, msg->msg.disconnect_ind.plci);
- if (chan >= 0) {
+ break;
+ case ACT2000_STATE_OWAIT:
ctmp = &card->bch[chan];
- actcapi_disconnect_resp(card, ctmp);
+ if (msg->msg.listen_b3_conf.info == 0) {
+ actcapi_connect_b3_req(card, ctmp);
+ ctmp->fsm_state = ACT2000_STATE_OBWAIT;
+ cmd.driver = card->myid;
+ cmd.command = ISDN_STAT_DCONN;
+ cmd.arg = chan;
+ card->interface.statcallb(&cmd);
+ } else {
+ ctmp->fsm_state = ACT2000_STATE_NULL;
+ cmd.driver = card->myid;
+ cmd.command = ISDN_STAT_DHUP;
+ cmd.arg = chan;
+ card->interface.statcallb(&cmd);
+ }
+ break;
+ }
+ break;
+ case 0x8201:
+ /* CONNECT_B3_CONF */
+ chan = find_plci(card, msg->msg.connect_b3_conf.plci);
+ if ((chan >= 0) && (card->bch[chan].fsm_state == ACT2000_STATE_OBWAIT)) {
+ ctmp = &card->bch[chan];
+ if (msg->msg.connect_b3_conf.info) {
ctmp->fsm_state = ACT2000_STATE_NULL;
cmd.driver = card->myid;
cmd.command = ISDN_STAT_DHUP;
cmd.arg = chan;
card->interface.statcallb(&cmd);
} else {
- ctmp = (act2000_chan *)tmp;
- ctmp->plci = msg->msg.disconnect_ind.plci;
- actcapi_disconnect_resp(card, ctmp);
+ ctmp->ncci = msg->msg.connect_b3_conf.ncci;
+ ctmp->fsm_state = ACT2000_STATE_BWAIT;
}
- break;
- case 0x4001:
- /* SELECT_B2_PROTOCOL_CONF */
- chan = find_plci(card, msg->msg.select_b2_protocol_conf.plci);
- if (chan >= 0)
- switch (card->bch[chan].fsm_state) {
- case ACT2000_STATE_ICALL:
- case ACT2000_STATE_OWAIT:
- ctmp = &card->bch[chan];
- if (msg->msg.select_b2_protocol_conf.info == 0)
- actcapi_select_b3_protocol_req(card, ctmp);
- else {
- ctmp->fsm_state = ACT2000_STATE_NULL;
- cmd.driver = card->myid;
- cmd.command = ISDN_STAT_DHUP;
- cmd.arg = chan;
- card->interface.statcallb(&cmd);
- }
- break;
- }
- break;
- case 0x8001:
- /* SELECT_B3_PROTOCOL_CONF */
- chan = find_plci(card, msg->msg.select_b3_protocol_conf.plci);
- if (chan >= 0)
- switch (card->bch[chan].fsm_state) {
- case ACT2000_STATE_ICALL:
- case ACT2000_STATE_OWAIT:
- ctmp = &card->bch[chan];
- if (msg->msg.select_b3_protocol_conf.info == 0)
- actcapi_listen_b3_req(card, ctmp);
- else {
- ctmp->fsm_state = ACT2000_STATE_NULL;
- cmd.driver = card->myid;
- cmd.command = ISDN_STAT_DHUP;
- cmd.arg = chan;
- card->interface.statcallb(&cmd);
- }
- }
- break;
- case 0x8101:
- /* LISTEN_B3_CONF */
- chan = find_plci(card, msg->msg.listen_b3_conf.plci);
- if (chan >= 0)
- switch (card->bch[chan].fsm_state) {
- case ACT2000_STATE_ICALL:
- ctmp = &card->bch[chan];
- if (msg->msg.listen_b3_conf.info == 0)
- actcapi_connect_resp(card, ctmp, 0);
- else {
- ctmp->fsm_state = ACT2000_STATE_NULL;
- cmd.driver = card->myid;
- cmd.command = ISDN_STAT_DHUP;
- cmd.arg = chan;
- card->interface.statcallb(&cmd);
- }
- break;
- case ACT2000_STATE_OWAIT:
- ctmp = &card->bch[chan];
- if (msg->msg.listen_b3_conf.info == 0) {
- actcapi_connect_b3_req(card, ctmp);
- ctmp->fsm_state = ACT2000_STATE_OBWAIT;
- cmd.driver = card->myid;
- cmd.command = ISDN_STAT_DCONN;
- cmd.arg = chan;
- card->interface.statcallb(&cmd);
- } else {
- ctmp->fsm_state = ACT2000_STATE_NULL;
- cmd.driver = card->myid;
- cmd.command = ISDN_STAT_DHUP;
- cmd.arg = chan;
- card->interface.statcallb(&cmd);
- }
- break;
- }
- break;
- case 0x8201:
- /* CONNECT_B3_CONF */
- chan = find_plci(card, msg->msg.connect_b3_conf.plci);
- if ((chan >= 0) && (card->bch[chan].fsm_state == ACT2000_STATE_OBWAIT)) {
- ctmp = &card->bch[chan];
- if (msg->msg.connect_b3_conf.info) {
- ctmp->fsm_state = ACT2000_STATE_NULL;
+ }
+ break;
+ case 0x8401:
+ /* DISCONNECT_B3_CONF */
+ chan = find_ncci(card, msg->msg.disconnect_b3_conf.ncci);
+ if ((chan >= 0) && (card->bch[chan].fsm_state == ACT2000_STATE_BHWAIT))
+ card->bch[chan].fsm_state = ACT2000_STATE_BHWAIT2;
+ break;
+ case 0x0702:
+ /* INFO_IND */
+ chan = find_plci(card, msg->msg.info_ind.plci);
+ if (chan >= 0)
+ /* TODO: Eval Charging info / cause */
+ actcapi_info_resp(card, &card->bch[chan]);
+ break;
+ case 0x0401:
+ /* LISTEN_CONF */
+ case 0x0501:
+ /* LISTEN_CONF */
+ case 0xff01:
+ /* MANUFACTURER_CONF */
+ break;
+ case 0xff02:
+ /* MANUFACTURER_IND */
+ if (msg->msg.manuf_msg == 3) {
+ memset(tmp, 0, sizeof(tmp));
+ strncpy(tmp,
+ &msg->msg.manufacturer_ind_err.errstring,
+ msg->hdr.len - 16);
+ if (msg->msg.manufacturer_ind_err.errcode)
+ printk(KERN_WARNING "act2000: %s\n", tmp);
+ else {
+ printk(KERN_DEBUG "act2000: %s\n", tmp);
+ if ((!strncmp(tmp, "INFO: Trace buffer con", 22)) ||
+ (!strncmp(tmp, "INFO: Compile Date/Tim", 22))) {
+ card->flags |= ACT2000_FLAGS_RUNNING;
+ cmd.command = ISDN_STAT_RUN;
cmd.driver = card->myid;
- cmd.command = ISDN_STAT_DHUP;
- cmd.arg = chan;
+ cmd.arg = 0;
+ actcapi_manufacturer_req_net(card);
+ actcapi_manufacturer_req_msn(card);
+ actcapi_listen_req(card);
card->interface.statcallb(&cmd);
- } else {
- ctmp->ncci = msg->msg.connect_b3_conf.ncci;
- ctmp->fsm_state = ACT2000_STATE_BWAIT;
}
}
- break;
- case 0x8401:
- /* DISCONNECT_B3_CONF */
- chan = find_ncci(card, msg->msg.disconnect_b3_conf.ncci);
- if ((chan >= 0) && (card->bch[chan].fsm_state == ACT2000_STATE_BHWAIT))
- card->bch[chan].fsm_state = ACT2000_STATE_BHWAIT2;
- break;
- case 0x0702:
- /* INFO_IND */
- chan = find_plci(card, msg->msg.info_ind.plci);
- if (chan >= 0)
- /* TODO: Eval Charging info / cause */
- actcapi_info_resp(card, &card->bch[chan]);
- break;
- case 0x0401:
- /* LISTEN_CONF */
- case 0x0501:
- /* LISTEN_CONF */
- case 0xff01:
- /* MANUFACTURER_CONF */
- break;
- case 0xff02:
- /* MANUFACTURER_IND */
- if (msg->msg.manuf_msg == 3) {
- memset(tmp, 0, sizeof(tmp));
- strncpy(tmp,
- &msg->msg.manufacturer_ind_err.errstring,
- msg->hdr.len - 16);
- if (msg->msg.manufacturer_ind_err.errcode)
- printk(KERN_WARNING "act2000: %s\n", tmp);
- else {
- printk(KERN_DEBUG "act2000: %s\n", tmp);
- if ((!strncmp(tmp, "INFO: Trace buffer con", 22)) ||
- (!strncmp(tmp, "INFO: Compile Date/Tim", 22))) {
- card->flags |= ACT2000_FLAGS_RUNNING;
- cmd.command = ISDN_STAT_RUN;
- cmd.driver = card->myid;
- cmd.arg = 0;
- actcapi_manufacturer_req_net(card);
- actcapi_manufacturer_req_msn(card);
- actcapi_listen_req(card);
- card->interface.statcallb(&cmd);
- }
- }
- }
- break;
- default:
- printk(KERN_WARNING "act2000: UNHANDLED Message %04x\n", ccmd);
- break;
+ }
+ break;
+ default:
+ printk(KERN_WARNING "act2000: UNHANDLED Message %04x\n", ccmd);
+ break;
}
dev_kfree_skb(skb);
}
@@ -1015,7 +1015,7 @@
char *descr;
int i;
char tmp[170];
-
+
#ifndef DEBUG_DATA_MSG
if (msg->hdr.cmd.cmd == 0x86)
return;
@@ -1030,151 +1030,151 @@
descr = valid_msg[i].description;
break;
}
- printk(KERN_DEBUG "%s %s msg\n", direction?"Outgoing":"Incoming", descr);
+ printk(KERN_DEBUG "%s %s msg\n", direction ? "Outgoing" : "Incoming", descr);
printk(KERN_DEBUG " ApplID = %d\n", msg->hdr.applicationID);
printk(KERN_DEBUG " Len = %d\n", msg->hdr.len);
printk(KERN_DEBUG " MsgNum = 0x%04x\n", msg->hdr.msgnum);
printk(KERN_DEBUG " Cmd = 0x%02x\n", msg->hdr.cmd.cmd);
printk(KERN_DEBUG " SubCmd = 0x%02x\n", msg->hdr.cmd.subcmd);
switch (i) {
- case 0:
- /* DATA B3 IND */
- printk(KERN_DEBUG " BLOCK = 0x%02x\n",
- msg->msg.data_b3_ind.blocknr);
- break;
- case 2:
- /* CONNECT CONF */
- printk(KERN_DEBUG " PLCI = 0x%04x\n",
- msg->msg.connect_conf.plci);
- printk(KERN_DEBUG " Info = 0x%04x\n",
- msg->msg.connect_conf.info);
- break;
+ case 0:
+ /* DATA B3 IND */
+ printk(KERN_DEBUG " BLOCK = 0x%02x\n",
+ msg->msg.data_b3_ind.blocknr);
+ break;
+ case 2:
+ /* CONNECT CONF */
+ printk(KERN_DEBUG " PLCI = 0x%04x\n",
+ msg->msg.connect_conf.plci);
+ printk(KERN_DEBUG " Info = 0x%04x\n",
+ msg->msg.connect_conf.info);
+ break;
+ case 3:
+ /* CONNECT IND */
+ printk(KERN_DEBUG " PLCI = 0x%04x\n",
+ msg->msg.connect_ind.plci);
+ printk(KERN_DEBUG " Contr = %d\n",
+ msg->msg.connect_ind.controller);
+ printk(KERN_DEBUG " SI1 = %d\n",
+ msg->msg.connect_ind.si1);
+ printk(KERN_DEBUG " SI2 = %d\n",
+ msg->msg.connect_ind.si2);
+ printk(KERN_DEBUG " EAZ = '%c'\n",
+ msg->msg.connect_ind.eaz);
+ actcapi_debug_caddr(&msg->msg.connect_ind.addr);
+ break;
+ case 5:
+ /* CONNECT ACTIVE IND */
+ printk(KERN_DEBUG " PLCI = 0x%04x\n",
+ msg->msg.connect_active_ind.plci);
+ actcapi_debug_caddr(&msg->msg.connect_active_ind.addr);
+ break;
+ case 8:
+ /* LISTEN CONF */
+ printk(KERN_DEBUG " Contr = %d\n",
+ msg->msg.listen_conf.controller);
+ printk(KERN_DEBUG " Info = 0x%04x\n",
+ msg->msg.listen_conf.info);
+ break;
+ case 11:
+ /* INFO IND */
+ printk(KERN_DEBUG " PLCI = 0x%04x\n",
+ msg->msg.info_ind.plci);
+ printk(KERN_DEBUG " Imsk = 0x%04x\n",
+ msg->msg.info_ind.nr.mask);
+ if (msg->hdr.len > 12) {
+ int l = msg->hdr.len - 12;
+ int j;
+ char *p = tmp;
+ for (j = 0; j < l; j++)
+ p += sprintf(p, "%02x ", msg->msg.info_ind.el.display[j]);
+ printk(KERN_DEBUG " D = '%s'\n", tmp);
+ }
+ break;
+ case 14:
+ /* SELECT B2 PROTOCOL CONF */
+ printk(KERN_DEBUG " PLCI = 0x%04x\n",
+ msg->msg.select_b2_protocol_conf.plci);
+ printk(KERN_DEBUG " Info = 0x%04x\n",
+ msg->msg.select_b2_protocol_conf.info);
+ break;
+ case 15:
+ /* SELECT B3 PROTOCOL CONF */
+ printk(KERN_DEBUG " PLCI = 0x%04x\n",
+ msg->msg.select_b3_protocol_conf.plci);
+ printk(KERN_DEBUG " Info = 0x%04x\n",
+ msg->msg.select_b3_protocol_conf.info);
+ break;
+ case 16:
+ /* LISTEN B3 CONF */
+ printk(KERN_DEBUG " PLCI = 0x%04x\n",
+ msg->msg.listen_b3_conf.plci);
+ printk(KERN_DEBUG " Info = 0x%04x\n",
+ msg->msg.listen_b3_conf.info);
+ break;
+ case 18:
+ /* CONNECT B3 IND */
+ printk(KERN_DEBUG " NCCI = 0x%04x\n",
+ msg->msg.connect_b3_ind.ncci);
+ printk(KERN_DEBUG " PLCI = 0x%04x\n",
+ msg->msg.connect_b3_ind.plci);
+ actcapi_debug_ncpi(&msg->msg.connect_b3_ind.ncpi);
+ break;
+ case 19:
+ /* CONNECT B3 ACTIVE IND */
+ printk(KERN_DEBUG " NCCI = 0x%04x\n",
+ msg->msg.connect_b3_active_ind.ncci);
+ actcapi_debug_ncpi(&msg->msg.connect_b3_active_ind.ncpi);
+ break;
+ case 26:
+ /* MANUFACTURER IND */
+ printk(KERN_DEBUG " Mmsg = 0x%02x\n",
+ msg->msg.manufacturer_ind_err.manuf_msg);
+ switch (msg->msg.manufacturer_ind_err.manuf_msg) {
case 3:
- /* CONNECT IND */
- printk(KERN_DEBUG " PLCI = 0x%04x\n",
- msg->msg.connect_ind.plci);
printk(KERN_DEBUG " Contr = %d\n",
- msg->msg.connect_ind.controller);
- printk(KERN_DEBUG " SI1 = %d\n",
- msg->msg.connect_ind.si1);
- printk(KERN_DEBUG " SI2 = %d\n",
- msg->msg.connect_ind.si2);
- printk(KERN_DEBUG " EAZ = '%c'\n",
- msg->msg.connect_ind.eaz);
- actcapi_debug_caddr(&msg->msg.connect_ind.addr);
+ msg->msg.manufacturer_ind_err.controller);
+ printk(KERN_DEBUG " Code = 0x%08x\n",
+ msg->msg.manufacturer_ind_err.errcode);
+ memset(tmp, 0, sizeof(tmp));
+ strncpy(tmp, &msg->msg.manufacturer_ind_err.errstring,
+ msg->hdr.len - 16);
+ printk(KERN_DEBUG " Emsg = '%s'\n", tmp);
break;
- case 5:
- /* CONNECT ACTIVE IND */
- printk(KERN_DEBUG " PLCI = 0x%04x\n",
- msg->msg.connect_active_ind.plci);
- actcapi_debug_caddr(&msg->msg.connect_active_ind.addr);
- break;
- case 8:
- /* LISTEN CONF */
- printk(KERN_DEBUG " Contr = %d\n",
- msg->msg.listen_conf.controller);
- printk(KERN_DEBUG " Info = 0x%04x\n",
- msg->msg.listen_conf.info);
- break;
- case 11:
- /* INFO IND */
- printk(KERN_DEBUG " PLCI = 0x%04x\n",
- msg->msg.info_ind.plci);
- printk(KERN_DEBUG " Imsk = 0x%04x\n",
- msg->msg.info_ind.nr.mask);
- if (msg->hdr.len > 12) {
- int l = msg->hdr.len - 12;
- int j;
- char *p = tmp;
- for (j = 0; j < l ; j++)
- p += sprintf(p, "%02x ", msg->msg.info_ind.el.display[j]);
- printk(KERN_DEBUG " D = '%s'\n", tmp);
- }
- break;
- case 14:
- /* SELECT B2 PROTOCOL CONF */
- printk(KERN_DEBUG " PLCI = 0x%04x\n",
- msg->msg.select_b2_protocol_conf.plci);
- printk(KERN_DEBUG " Info = 0x%04x\n",
- msg->msg.select_b2_protocol_conf.info);
- break;
- case 15:
- /* SELECT B3 PROTOCOL CONF */
- printk(KERN_DEBUG " PLCI = 0x%04x\n",
- msg->msg.select_b3_protocol_conf.plci);
- printk(KERN_DEBUG " Info = 0x%04x\n",
- msg->msg.select_b3_protocol_conf.info);
- break;
- case 16:
- /* LISTEN B3 CONF */
- printk(KERN_DEBUG " PLCI = 0x%04x\n",
- msg->msg.listen_b3_conf.plci);
- printk(KERN_DEBUG " Info = 0x%04x\n",
- msg->msg.listen_b3_conf.info);
- break;
- case 18:
- /* CONNECT B3 IND */
- printk(KERN_DEBUG " NCCI = 0x%04x\n",
- msg->msg.connect_b3_ind.ncci);
- printk(KERN_DEBUG " PLCI = 0x%04x\n",
- msg->msg.connect_b3_ind.plci);
- actcapi_debug_ncpi(&msg->msg.connect_b3_ind.ncpi);
- break;
- case 19:
- /* CONNECT B3 ACTIVE IND */
- printk(KERN_DEBUG " NCCI = 0x%04x\n",
- msg->msg.connect_b3_active_ind.ncci);
- actcapi_debug_ncpi(&msg->msg.connect_b3_active_ind.ncpi);
- break;
- case 26:
- /* MANUFACTURER IND */
- printk(KERN_DEBUG " Mmsg = 0x%02x\n",
- msg->msg.manufacturer_ind_err.manuf_msg);
- switch (msg->msg.manufacturer_ind_err.manuf_msg) {
- case 3:
- printk(KERN_DEBUG " Contr = %d\n",
- msg->msg.manufacturer_ind_err.controller);
- printk(KERN_DEBUG " Code = 0x%08x\n",
- msg->msg.manufacturer_ind_err.errcode);
- memset(tmp, 0, sizeof(tmp));
- strncpy(tmp, &msg->msg.manufacturer_ind_err.errstring,
- msg->hdr.len - 16);
- printk(KERN_DEBUG " Emsg = '%s'\n", tmp);
- break;
- }
- break;
- case 30:
- /* LISTEN REQ */
- printk(KERN_DEBUG " Imsk = 0x%08x\n",
- msg->msg.listen_req.infomask);
- printk(KERN_DEBUG " Emsk = 0x%04x\n",
- msg->msg.listen_req.eazmask);
- printk(KERN_DEBUG " Smsk = 0x%04x\n",
- msg->msg.listen_req.simask);
- break;
- case 35:
- /* SELECT_B2_PROTOCOL_REQ */
- printk(KERN_DEBUG " PLCI = 0x%04x\n",
- msg->msg.select_b2_protocol_req.plci);
- printk(KERN_DEBUG " prot = 0x%02x\n",
- msg->msg.select_b2_protocol_req.protocol);
- if (msg->hdr.len >= 11)
- printk(KERN_DEBUG "No dlpd\n");
- else
- actcapi_debug_dlpd(&msg->msg.select_b2_protocol_req.dlpd);
- break;
- case 44:
- /* CONNECT RESP */
- printk(KERN_DEBUG " PLCI = 0x%04x\n",
- msg->msg.connect_resp.plci);
- printk(KERN_DEBUG " CAUSE = 0x%02x\n",
- msg->msg.connect_resp.rejectcause);
- break;
- case 45:
- /* CONNECT ACTIVE RESP */
- printk(KERN_DEBUG " PLCI = 0x%04x\n",
- msg->msg.connect_active_resp.plci);
- break;
+ }
+ break;
+ case 30:
+ /* LISTEN REQ */
+ printk(KERN_DEBUG " Imsk = 0x%08x\n",
+ msg->msg.listen_req.infomask);
+ printk(KERN_DEBUG " Emsk = 0x%04x\n",
+ msg->msg.listen_req.eazmask);
+ printk(KERN_DEBUG " Smsk = 0x%04x\n",
+ msg->msg.listen_req.simask);
+ break;
+ case 35:
+ /* SELECT_B2_PROTOCOL_REQ */
+ printk(KERN_DEBUG " PLCI = 0x%04x\n",
+ msg->msg.select_b2_protocol_req.plci);
+ printk(KERN_DEBUG " prot = 0x%02x\n",
+ msg->msg.select_b2_protocol_req.protocol);
+ if (msg->hdr.len >= 11)
+ printk(KERN_DEBUG "No dlpd\n");
+ else
+ actcapi_debug_dlpd(&msg->msg.select_b2_protocol_req.dlpd);
+ break;
+ case 44:
+ /* CONNECT RESP */
+ printk(KERN_DEBUG " PLCI = 0x%04x\n",
+ msg->msg.connect_resp.plci);
+ printk(KERN_DEBUG " CAUSE = 0x%02x\n",
+ msg->msg.connect_resp.rejectcause);
+ break;
+ case 45:
+ /* CONNECT ACTIVE RESP */
+ printk(KERN_DEBUG " PLCI = 0x%04x\n",
+ msg->msg.connect_active_resp.plci);
+ break;
}
}
#endif