include/linux/mmc/dw_mmc.h - kernel/msm-4.19 - Gitiles

 /*
  * Synopsys DesignWare Multimedia Card Interface driver
  *  (Based on NXP driver for lpc 31xx)
  *
  * Copyright (C) 2009 NXP Semiconductors
  * Copyright (C) 2009, 2010 Imagination Technologies Ltd.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  */

 #ifndef LINUX_MMC_DW_MMC_H
 #define LINUX_MMC_DW_MMC_H

 #include <linux/scatterlist.h>
 #include <linux/mmc/core.h>

 #define MAX_MCI_SLOTS	2

 enum dw_mci_state {
 	STATE_IDLE = 0,
 	STATE_SENDING_CMD,
 	STATE_SENDING_DATA,
 	STATE_DATA_BUSY,
 	STATE_SENDING_STOP,
 	STATE_DATA_ERROR,
 	STATE_SENDING_CMD11,
 	STATE_WAITING_CMD11_DONE,
 };

 enum {
 	EVENT_CMD_COMPLETE = 0,
 	EVENT_XFER_COMPLETE,
 	EVENT_DATA_COMPLETE,
 	EVENT_DATA_ERROR,
 	EVENT_XFER_ERROR
 };

 struct mmc_data;

 /**
  * struct dw_mci - MMC controller state shared between all slots
  * @lock: Spinlock protecting the queue and associated data.
  * @regs: Pointer to MMIO registers.
  * @sg: Scatterlist entry currently being processed by PIO code, if any.
  * @sg_miter: PIO mapping scatterlist iterator.
  * @cur_slot: The slot which is currently using the controller.
  * @mrq: The request currently being processed on @cur_slot,
  *	or NULL if the controller is idle.
  * @cmd: The command currently being sent to the card, or NULL.
  * @data: The data currently being transferred, or NULL if no data
  *	transfer is in progress.
  * @use_dma: Whether DMA channel is initialized or not.
  * @using_dma: Whether DMA is in use for the current transfer.
  * @dma_64bit_address: Whether DMA supports 64-bit address mode or not.
  * @sg_dma: Bus address of DMA buffer.
  * @sg_cpu: Virtual address of DMA buffer.
  * @dma_ops: Pointer to platform-specific DMA callbacks.
  * @cmd_status: Snapshot of SR taken upon completion of the current
  *	command. Only valid when EVENT_CMD_COMPLETE is pending.
  * @data_status: Snapshot of SR taken upon completion of the current
  *	data transfer. Only valid when EVENT_DATA_COMPLETE or
  *	EVENT_DATA_ERROR is pending.
  * @stop_cmdr: Value to be loaded into CMDR when the stop command is
  *	to be sent.
  * @dir_status: Direction of current transfer.
  * @tasklet: Tasklet running the request state machine.
  * @card_tasklet: Tasklet handling card detect.
  * @pending_events: Bitmask of events flagged by the interrupt handler
  *	to be processed by the tasklet.
  * @completed_events: Bitmask of events which the state machine has
  *	processed.
  * @state: Tasklet state.
  * @queue: List of slots waiting for access to the controller.
  * @bus_hz: The rate of @mck in Hz. This forms the basis for MMC bus
  *	rate and timeout calculations.
  * @current_speed: Configured rate of the controller.
  * @num_slots: Number of slots available.
  * @verid: Denote Version ID.
  * @data_offset: Set the offset of DATA register according to VERID.
  * @dev: Device associated with the MMC controller.
  * @pdata: Platform data associated with the MMC controller.
  * @drv_data: Driver specific data for identified variant of the controller
  * @priv: Implementation defined private data.
  * @biu_clk: Pointer to bus interface unit clock instance.
  * @ciu_clk: Pointer to card interface unit clock instance.
  * @slot: Slots sharing this MMC controller.
  * @fifo_depth: depth of FIFO.
  * @data_shift: log2 of FIFO item size.
  * @part_buf_start: Start index in part_buf.
  * @part_buf_count: Bytes of partial data in part_buf.
  * @part_buf: Simple buffer for partial fifo reads/writes.
  * @push_data: Pointer to FIFO push function.
  * @pull_data: Pointer to FIFO pull function.
  * @quirks: Set of quirks that apply to specific versions of the IP.
  * @irq_flags: The flags to be passed to request_irq.
  * @irq: The irq value to be passed to request_irq.
  * @sdio_id0: Number of slot0 in the SDIO interrupt registers.
  *
  * Locking
  * =======
  *
  * @lock is a softirq-safe spinlock protecting @queue as well as
  * @cur_slot, @mrq and @state. These must always be updated
  * at the same time while holding @lock.
  *
  * @irq_lock is an irq-safe spinlock protecting the INTMASK register
  * to allow the interrupt handler to modify it directly.  Held for only long
  * enough to read-modify-write INTMASK and no other locks are grabbed when
  * holding this one.
  *
  * The @mrq field of struct dw_mci_slot is also protected by @lock,
  * and must always be written at the same time as the slot is added to
  * @queue.
  *
  * @pending_events and @completed_events are accessed using atomic bit
  * operations, so they don't need any locking.
  *
  * None of the fields touched by the interrupt handler need any
  * locking. However, ordering is important: Before EVENT_DATA_ERROR or
  * EVENT_DATA_COMPLETE is set in @pending_events, all data-related
  * interrupts must be disabled and @data_status updated with a
  * snapshot of SR. Similarly, before EVENT_CMD_COMPLETE is set, the
  * CMDRDY interrupt must be disabled and @cmd_status updated with a
  * snapshot of SR, and before EVENT_XFER_COMPLETE can be set, the
  * bytes_xfered field of @data must be written. This is ensured by
  * using barriers.
  */
 struct dw_mci {
 	spinlock_t		lock;
 	spinlock_t		irq_lock;
 	void __iomem		*regs;

 	struct scatterlist	*sg;
 	struct sg_mapping_iter	sg_miter;

 	struct dw_mci_slot	*cur_slot;
 	struct mmc_request	*mrq;
 	struct mmc_command	*cmd;
 	struct mmc_data		*data;
 	struct mmc_command	stop_abort;
 	unsigned int		prev_blksz;
 	unsigned char		timing;

 	/* DMA interface members*/
 	int			use_dma;
 	int			using_dma;
 	int			dma_64bit_address;

 	dma_addr_t		sg_dma;
 	void			*sg_cpu;
 	const struct dw_mci_dma_ops	*dma_ops;
 #ifdef CONFIG_MMC_DW_IDMAC
 	unsigned int		ring_size;
 #else
 	struct dw_mci_dma_data	*dma_data;
 #endif
 	u32			cmd_status;
 	u32			data_status;
 	u32			stop_cmdr;
 	u32			dir_status;
 	struct tasklet_struct	tasklet;
 	unsigned long		pending_events;
 	unsigned long		completed_events;
 	enum dw_mci_state	state;
 	struct list_head	queue;

 	u32			bus_hz;
 	u32			current_speed;
 	u32			num_slots;
 	u32			fifoth_val;
 	u16			verid;
 	u16			data_offset;
 	struct device		*dev;
 	struct dw_mci_board	*pdata;
 	const struct dw_mci_drv_data	*drv_data;
 	void			*priv;
 	struct clk		*biu_clk;
 	struct clk		*ciu_clk;
 	struct dw_mci_slot	*slot[MAX_MCI_SLOTS];

 	/* FIFO push and pull */
 	int			fifo_depth;
 	int			data_shift;
 	u8			part_buf_start;
 	u8			part_buf_count;
 	union {
 		u16		part_buf16;
 		u32		part_buf32;
 		u64		part_buf;
 	};
 	void (*push_data)(struct dw_mci *host, void *buf, int cnt);
 	void (*pull_data)(struct dw_mci *host, void *buf, int cnt);

 	/* Workaround flags */
 	u32			quirks;

 	bool			vqmmc_enabled;
 	unsigned long		irq_flags; /* IRQ flags */
 	int			irq;

 	int			sdio_id0;
 };

 /* DMA ops for Internal/External DMAC interface */
 struct dw_mci_dma_ops {
 	/* DMA Ops */
 	int (*init)(struct dw_mci *host);
 	void (*start)(struct dw_mci *host, unsigned int sg_len);
 	void (*complete)(struct dw_mci *host);
 	void (*stop)(struct dw_mci *host);
 	void (*cleanup)(struct dw_mci *host);
 	void (*exit)(struct dw_mci *host);
 };

 /* IP Quirks/flags. */
 /* DTO fix for command transmission with IDMAC configured */
 #define DW_MCI_QUIRK_IDMAC_DTO			BIT(0)
 /* delay needed between retries on some 2.11a implementations */
 #define DW_MCI_QUIRK_RETRY_DELAY		BIT(1)
 /* High Speed Capable - Supports HS cards (up to 50MHz) */
 #define DW_MCI_QUIRK_HIGHSPEED			BIT(2)
 /* Unreliable card detection */
 #define DW_MCI_QUIRK_BROKEN_CARD_DETECTION	BIT(3)
 /* No write protect */
 #define DW_MCI_QUIRK_NO_WRITE_PROTECT		BIT(4)

 /* Slot level quirks */
 /* This slot has no write protect */
 #define DW_MCI_SLOT_QUIRK_NO_WRITE_PROTECT	BIT(0)

 struct dma_pdata;

 struct block_settings {
 	unsigned short	max_segs;	/* see blk_queue_max_segments */
 	unsigned int	max_blk_size;	/* maximum size of one mmc block */
 	unsigned int	max_blk_count;	/* maximum number of blocks in one req*/
 	unsigned int	max_req_size;	/* maximum number of bytes in one req*/
 	unsigned int	max_seg_size;	/* see blk_queue_max_segment_size */
 };

 /* Board platform data */
 struct dw_mci_board {
 	u32 num_slots;

 	u32 quirks; /* Workaround / Quirk flags */
 	unsigned int bus_hz; /* Clock speed at the cclk_in pad */

 	u32 caps;	/* Capabilities */
 	u32 caps2;	/* More capabilities */
 	u32 pm_caps;	/* PM capabilities */
 	/*
 	 * Override fifo depth. If 0, autodetect it from the FIFOTH register,
 	 * but note that this may not be reliable after a bootloader has used
 	 * it.
 	 */
 	unsigned int fifo_depth;

 	/* delay in mS before detecting cards after interrupt */
 	u32 detect_delay_ms;

 	struct dw_mci_dma_ops *dma_ops;
 	struct dma_pdata *data;
 	struct block_settings *blk_settings;
 };

 #endif /* LINUX_MMC_DW_MMC_H */
	/*
	* Synopsys DesignWare Multimedia Card Interface driver
	* (Based on NXP driver for lpc 31xx)
	*
	* Copyright (C) 2009 NXP Semiconductors
	* Copyright (C) 2009, 2010 Imagination Technologies Ltd.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*/

	#ifndef LINUX_MMC_DW_MMC_H
	#define LINUX_MMC_DW_MMC_H

	#include <linux/scatterlist.h>
	#include <linux/mmc/core.h>

	#define MAX_MCI_SLOTS 2

	enum dw_mci_state {
	STATE_IDLE = 0,
	STATE_SENDING_CMD,
	STATE_SENDING_DATA,
	STATE_DATA_BUSY,
	STATE_SENDING_STOP,
	STATE_DATA_ERROR,
	STATE_SENDING_CMD11,
	STATE_WAITING_CMD11_DONE,
	};

	enum {
	EVENT_CMD_COMPLETE = 0,
	EVENT_XFER_COMPLETE,
	EVENT_DATA_COMPLETE,
	EVENT_DATA_ERROR,
	EVENT_XFER_ERROR
	};

	struct mmc_data;

	/**
	* struct dw_mci - MMC controller state shared between all slots
	* @lock: Spinlock protecting the queue and associated data.
	* @regs: Pointer to MMIO registers.
	* @sg: Scatterlist entry currently being processed by PIO code, if any.
	* @sg_miter: PIO mapping scatterlist iterator.
	* @cur_slot: The slot which is currently using the controller.
	* @mrq: The request currently being processed on @cur_slot,
	* or NULL if the controller is idle.
	* @cmd: The command currently being sent to the card, or NULL.
	* @data: The data currently being transferred, or NULL if no data
	* transfer is in progress.
	* @use_dma: Whether DMA channel is initialized or not.
	* @using_dma: Whether DMA is in use for the current transfer.
	* @dma_64bit_address: Whether DMA supports 64-bit address mode or not.
	* @sg_dma: Bus address of DMA buffer.
	* @sg_cpu: Virtual address of DMA buffer.
	* @dma_ops: Pointer to platform-specific DMA callbacks.
	* @cmd_status: Snapshot of SR taken upon completion of the current
	* command. Only valid when EVENT_CMD_COMPLETE is pending.
	* @data_status: Snapshot of SR taken upon completion of the current
	* data transfer. Only valid when EVENT_DATA_COMPLETE or
	* EVENT_DATA_ERROR is pending.
	* @stop_cmdr: Value to be loaded into CMDR when the stop command is
	* to be sent.
	* @dir_status: Direction of current transfer.
	* @tasklet: Tasklet running the request state machine.
	* @card_tasklet: Tasklet handling card detect.
	* @pending_events: Bitmask of events flagged by the interrupt handler
	* to be processed by the tasklet.
	* @completed_events: Bitmask of events which the state machine has
	* processed.
	* @state: Tasklet state.
	* @queue: List of slots waiting for access to the controller.
	* @bus_hz: The rate of @mck in Hz. This forms the basis for MMC bus
	* rate and timeout calculations.
	* @current_speed: Configured rate of the controller.
	* @num_slots: Number of slots available.
	* @verid: Denote Version ID.
	* @data_offset: Set the offset of DATA register according to VERID.
	* @dev: Device associated with the MMC controller.
	* @pdata: Platform data associated with the MMC controller.
	* @drv_data: Driver specific data for identified variant of the controller
	* @priv: Implementation defined private data.
	* @biu_clk: Pointer to bus interface unit clock instance.
	* @ciu_clk: Pointer to card interface unit clock instance.
	* @slot: Slots sharing this MMC controller.
	* @fifo_depth: depth of FIFO.
	* @data_shift: log2 of FIFO item size.
	* @part_buf_start: Start index in part_buf.
	* @part_buf_count: Bytes of partial data in part_buf.
	* @part_buf: Simple buffer for partial fifo reads/writes.
	* @push_data: Pointer to FIFO push function.
	* @pull_data: Pointer to FIFO pull function.
	* @quirks: Set of quirks that apply to specific versions of the IP.
	* @irq_flags: The flags to be passed to request_irq.
	* @irq: The irq value to be passed to request_irq.
	* @sdio_id0: Number of slot0 in the SDIO interrupt registers.
	*
	* Locking
	* =======
	*
	* @lock is a softirq-safe spinlock protecting @queue as well as
	* @cur_slot, @mrq and @state. These must always be updated
	* at the same time while holding @lock.
	*
	* @irq_lock is an irq-safe spinlock protecting the INTMASK register
	* to allow the interrupt handler to modify it directly. Held for only long
	* enough to read-modify-write INTMASK and no other locks are grabbed when
	* holding this one.
	*
	* The @mrq field of struct dw_mci_slot is also protected by @lock,
	* and must always be written at the same time as the slot is added to
	* @queue.
	*
	* @pending_events and @completed_events are accessed using atomic bit
	* operations, so they don't need any locking.
	*
	* None of the fields touched by the interrupt handler need any
	* locking. However, ordering is important: Before EVENT_DATA_ERROR or
	* EVENT_DATA_COMPLETE is set in @pending_events, all data-related
	* interrupts must be disabled and @data_status updated with a
	* snapshot of SR. Similarly, before EVENT_CMD_COMPLETE is set, the
	* CMDRDY interrupt must be disabled and @cmd_status updated with a
	* snapshot of SR, and before EVENT_XFER_COMPLETE can be set, the
	* bytes_xfered field of @data must be written. This is ensured by
	* using barriers.
	*/
	struct dw_mci {
	spinlock_t lock;
	spinlock_t irq_lock;
	void __iomem *regs;

	struct scatterlist *sg;
	struct sg_mapping_iter sg_miter;

	struct dw_mci_slot *cur_slot;
	struct mmc_request *mrq;
	struct mmc_command *cmd;
	struct mmc_data *data;
	struct mmc_command stop_abort;
	unsigned int prev_blksz;
	unsigned char timing;

	/* DMA interface members*/
	int use_dma;
	int using_dma;
	int dma_64bit_address;

	dma_addr_t sg_dma;
	void *sg_cpu;
	const struct dw_mci_dma_ops *dma_ops;
	#ifdef CONFIG_MMC_DW_IDMAC
	unsigned int ring_size;
	#else
	struct dw_mci_dma_data *dma_data;
	#endif
	u32 cmd_status;
	u32 data_status;
	u32 stop_cmdr;
	u32 dir_status;
	struct tasklet_struct tasklet;
	unsigned long pending_events;
	unsigned long completed_events;
	enum dw_mci_state state;
	struct list_head queue;

	u32 bus_hz;
	u32 current_speed;
	u32 num_slots;
	u32 fifoth_val;
	u16 verid;
	u16 data_offset;
	struct device *dev;
	struct dw_mci_board *pdata;
	const struct dw_mci_drv_data *drv_data;
	void *priv;
	struct clk *biu_clk;
	struct clk *ciu_clk;
	struct dw_mci_slot *slot[MAX_MCI_SLOTS];

	/* FIFO push and pull */
	int fifo_depth;
	int data_shift;
	u8 part_buf_start;
	u8 part_buf_count;
	union {
	u16 part_buf16;
	u32 part_buf32;
	u64 part_buf;
	};
	void (push_data)(struct dw_mci host, void *buf, int cnt);
	void (pull_data)(struct dw_mci host, void *buf, int cnt);

	/* Workaround flags */
	u32 quirks;

	bool vqmmc_enabled;
	unsigned long irq_flags; /* IRQ flags */
	int irq;

	int sdio_id0;
	};

	/* DMA ops for Internal/External DMAC interface */
	struct dw_mci_dma_ops {
	/* DMA Ops */
	int (init)(struct dw_mci host);
	void (start)(struct dw_mci host, unsigned int sg_len);
	void (complete)(struct dw_mci host);
	void (stop)(struct dw_mci host);
	void (cleanup)(struct dw_mci host);
	void (exit)(struct dw_mci host);
	};

	/* IP Quirks/flags. */
	/* DTO fix for command transmission with IDMAC configured */
	#define DW_MCI_QUIRK_IDMAC_DTO BIT(0)
	/* delay needed between retries on some 2.11a implementations */
	#define DW_MCI_QUIRK_RETRY_DELAY BIT(1)
	/* High Speed Capable - Supports HS cards (up to 50MHz) */
	#define DW_MCI_QUIRK_HIGHSPEED BIT(2)
	/* Unreliable card detection */
	#define DW_MCI_QUIRK_BROKEN_CARD_DETECTION BIT(3)
	/* No write protect */
	#define DW_MCI_QUIRK_NO_WRITE_PROTECT BIT(4)

	/* Slot level quirks */
	/* This slot has no write protect */
	#define DW_MCI_SLOT_QUIRK_NO_WRITE_PROTECT BIT(0)

	struct dma_pdata;

	struct block_settings {
	unsigned short max_segs; /* see blk_queue_max_segments */
	unsigned int max_blk_size; /* maximum size of one mmc block */
	unsigned int max_blk_count; /* maximum number of blocks in one req*/
	unsigned int max_req_size; /* maximum number of bytes in one req*/
	unsigned int max_seg_size; /* see blk_queue_max_segment_size */
	};

	/* Board platform data */
	struct dw_mci_board {
	u32 num_slots;

	u32 quirks; /* Workaround / Quirk flags */
	unsigned int bus_hz; /* Clock speed at the cclk_in pad */

	u32 caps; /* Capabilities */
	u32 caps2; /* More capabilities */
	u32 pm_caps; /* PM capabilities */
	/*
	* Override fifo depth. If 0, autodetect it from the FIFOTH register,
	* but note that this may not be reliable after a bootloader has used
	* it.
	*/
	unsigned int fifo_depth;

	/* delay in mS before detecting cards after interrupt */
	u32 detect_delay_ms;

	struct dw_mci_dma_ops *dma_ops;
	struct dma_pdata *data;
	struct block_settings *blk_settings;
	};

	#endif /* LINUX_MMC_DW_MMC_H */