| /****************************************************************************** |
| * |
| * This file is provided under a dual BSD/GPLv2 license. When using or |
| * redistributing this file, you may do so under either license. |
| * |
| * GPL LICENSE SUMMARY |
| * |
| * Copyright(c) 2014 Intel Corporation. All rights reserved. |
| * Copyright(c) 2014 Intel Mobile Communications GmbH |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, |
| * USA |
| * |
| * The full GNU General Public License is included in this distribution |
| * in the file called COPYING. |
| * |
| * Contact Information: |
| * Intel Linux Wireless <ilw@linux.intel.com> |
| * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| * |
| * BSD LICENSE |
| * |
| * Copyright(c) 2014 Intel Corporation. All rights reserved. |
| * Copyright(c) 2014 Intel Mobile Communications GmbH |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * * Neither the name Intel Corporation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| *****************************************************************************/ |
| |
| #include <linux/module.h> |
| #include <linux/stringify.h> |
| #include "iwl-config.h" |
| #include "iwl-agn-hw.h" |
| |
| /* Highest firmware API version supported */ |
| #define IWL8000_UCODE_API_MAX 10 |
| |
| /* Oldest version we won't warn about */ |
| #define IWL8000_UCODE_API_OK 8 |
| |
| /* Lowest firmware API version supported */ |
| #define IWL8000_UCODE_API_MIN 8 |
| |
| /* NVM versions */ |
| #define IWL8000_NVM_VERSION 0x0a1d |
| #define IWL8000_TX_POWER_VERSION 0xffff /* meaningless */ |
| |
| #define IWL8000_FW_PRE "iwlwifi-8000" |
| #define IWL8000_MODULE_FIRMWARE(api) \ |
| IWL8000_FW_PRE "-" __stringify(api) ".ucode" |
| |
| #define NVM_HW_SECTION_NUM_FAMILY_8000 10 |
| #define DEFAULT_NVM_FILE_FAMILY_8000 "iwl_nvm_8000.bin" |
| |
| /* Max SDIO RX aggregation size of the ADDBA request/response */ |
| #define MAX_RX_AGG_SIZE_8260_SDIO 28 |
| |
| /* Max A-MPDU exponent for HT and VHT */ |
| #define MAX_HT_AMPDU_EXPONENT_8260_SDIO IEEE80211_HT_MAX_AMPDU_32K |
| #define MAX_VHT_AMPDU_EXPONENT_8260_SDIO IEEE80211_VHT_MAX_AMPDU_32K |
| |
| static const struct iwl_base_params iwl8000_base_params = { |
| .eeprom_size = OTP_LOW_IMAGE_SIZE_FAMILY_8000, |
| .num_of_queues = IWLAGN_NUM_QUEUES, |
| .pll_cfg_val = 0, |
| .shadow_ram_support = true, |
| .led_compensation = 57, |
| .wd_timeout = IWL_LONG_WD_TIMEOUT, |
| .max_event_log_size = 512, |
| .shadow_reg_enable = true, |
| .pcie_l1_allowed = true, |
| }; |
| |
| static const struct iwl_ht_params iwl8000_ht_params = { |
| .stbc = true, |
| .ldpc = true, |
| .ht40_bands = BIT(IEEE80211_BAND_2GHZ) | BIT(IEEE80211_BAND_5GHZ), |
| }; |
| |
| #define IWL_DEVICE_8000 \ |
| .ucode_api_max = IWL8000_UCODE_API_MAX, \ |
| .ucode_api_ok = IWL8000_UCODE_API_OK, \ |
| .ucode_api_min = IWL8000_UCODE_API_MIN, \ |
| .device_family = IWL_DEVICE_FAMILY_8000, \ |
| .max_inst_size = IWL60_RTC_INST_SIZE, \ |
| .max_data_size = IWL60_RTC_DATA_SIZE, \ |
| .base_params = &iwl8000_base_params, \ |
| .led_mode = IWL_LED_RF_STATE, \ |
| .nvm_hw_section_num = NVM_HW_SECTION_NUM_FAMILY_8000, \ |
| .d0i3 = true, \ |
| .non_shared_ant = ANT_A |
| |
| const struct iwl_cfg iwl8260_2n_cfg = { |
| .name = "Intel(R) Dual Band Wireless N 8260", |
| .fw_name_pre = IWL8000_FW_PRE, |
| IWL_DEVICE_8000, |
| .ht_params = &iwl8000_ht_params, |
| .nvm_ver = IWL8000_NVM_VERSION, |
| .nvm_calib_ver = IWL8000_TX_POWER_VERSION, |
| }; |
| |
| const struct iwl_cfg iwl8260_2ac_cfg = { |
| .name = "Intel(R) Dual Band Wireless AC 8260", |
| .fw_name_pre = IWL8000_FW_PRE, |
| IWL_DEVICE_8000, |
| .ht_params = &iwl8000_ht_params, |
| .nvm_ver = IWL8000_NVM_VERSION, |
| .nvm_calib_ver = IWL8000_TX_POWER_VERSION, |
| .max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K, |
| }; |
| |
| const struct iwl_cfg iwl8260_2ac_sdio_cfg = { |
| .name = "Intel(R) Dual Band Wireless-AC 8260", |
| .fw_name_pre = IWL8000_FW_PRE, |
| IWL_DEVICE_8000, |
| .ht_params = &iwl8000_ht_params, |
| .nvm_ver = IWL8000_NVM_VERSION, |
| .nvm_calib_ver = IWL8000_TX_POWER_VERSION, |
| .default_nvm_file = DEFAULT_NVM_FILE_FAMILY_8000, |
| .max_rx_agg_size = MAX_RX_AGG_SIZE_8260_SDIO, |
| .disable_dummy_notification = true, |
| .max_ht_ampdu_exponent = MAX_HT_AMPDU_EXPONENT_8260_SDIO, |
| .max_vht_ampdu_exponent = MAX_VHT_AMPDU_EXPONENT_8260_SDIO, |
| }; |
| |
| MODULE_FIRMWARE(IWL8000_MODULE_FIRMWARE(IWL8000_UCODE_API_OK)); |