Add fs_enet ethernet network driver, for several embedded platforms.
diff --git a/drivers/net/fs_enet/mii-bitbang.c b/drivers/net/fs_enet/mii-bitbang.c
new file mode 100644
index 0000000..24a5e2e
--- /dev/null
+++ b/drivers/net/fs_enet/mii-bitbang.c
@@ -0,0 +1,405 @@
+/*
+ * Combined Ethernet driver for Motorola MPC8xx and MPC82xx.
+ *
+ * Copyright (c) 2003 Intracom S.A.
+ * by Pantelis Antoniou <panto@intracom.gr>
+ *
+ * 2005 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/bitops.h>
+
+#include <asm/pgtable.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#include "fs_enet.h"
+
+#ifdef CONFIG_8xx
+static int bitbang_prep_bit(u8 **dirp, u8 **datp, u8 *mskp, int port, int bit)
+{
+ immap_t *im = (immap_t *)fs_enet_immap;
+ void *dir, *dat, *ppar;
+ int adv;
+ u8 msk;
+
+ switch (port) {
+ case fsiop_porta:
+ dir = &im->im_ioport.iop_padir;
+ dat = &im->im_ioport.iop_padat;
+ ppar = &im->im_ioport.iop_papar;
+ break;
+
+ case fsiop_portb:
+ dir = &im->im_cpm.cp_pbdir;
+ dat = &im->im_cpm.cp_pbdat;
+ ppar = &im->im_cpm.cp_pbpar;
+ break;
+
+ case fsiop_portc:
+ dir = &im->im_ioport.iop_pcdir;
+ dat = &im->im_ioport.iop_pcdat;
+ ppar = &im->im_ioport.iop_pcpar;
+ break;
+
+ case fsiop_portd:
+ dir = &im->im_ioport.iop_pddir;
+ dat = &im->im_ioport.iop_pddat;
+ ppar = &im->im_ioport.iop_pdpar;
+ break;
+
+ case fsiop_porte:
+ dir = &im->im_cpm.cp_pedir;
+ dat = &im->im_cpm.cp_pedat;
+ ppar = &im->im_cpm.cp_pepar;
+ break;
+
+ default:
+ printk(KERN_ERR DRV_MODULE_NAME
+ "Illegal port value %d!\n", port);
+ return -EINVAL;
+ }
+
+ adv = bit >> 3;
+ dir = (char *)dir + adv;
+ dat = (char *)dat + adv;
+ ppar = (char *)ppar + adv;
+
+ msk = 1 << (7 - (bit & 7));
+ if ((in_8(ppar) & msk) != 0) {
+ printk(KERN_ERR DRV_MODULE_NAME
+ "pin %d on port %d is not general purpose!\n", bit, port);
+ return -EINVAL;
+ }
+
+ *dirp = dir;
+ *datp = dat;
+ *mskp = msk;
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_8260
+static int bitbang_prep_bit(u8 **dirp, u8 **datp, u8 *mskp, int port, int bit)
+{
+ iop_cpm2_t *io = &((cpm2_map_t *)fs_enet_immap)->im_ioport;
+ void *dir, *dat, *ppar;
+ int adv;
+ u8 msk;
+
+ switch (port) {
+ case fsiop_porta:
+ dir = &io->iop_pdira;
+ dat = &io->iop_pdata;
+ ppar = &io->iop_ppara;
+ break;
+
+ case fsiop_portb:
+ dir = &io->iop_pdirb;
+ dat = &io->iop_pdatb;
+ ppar = &io->iop_pparb;
+ break;
+
+ case fsiop_portc:
+ dir = &io->iop_pdirc;
+ dat = &io->iop_pdatc;
+ ppar = &io->iop_pparc;
+ break;
+
+ case fsiop_portd:
+ dir = &io->iop_pdird;
+ dat = &io->iop_pdatd;
+ ppar = &io->iop_ppard;
+ break;
+
+ default:
+ printk(KERN_ERR DRV_MODULE_NAME
+ "Illegal port value %d!\n", port);
+ return -EINVAL;
+ }
+
+ adv = bit >> 3;
+ dir = (char *)dir + adv;
+ dat = (char *)dat + adv;
+ ppar = (char *)ppar + adv;
+
+ msk = 1 << (7 - (bit & 7));
+ if ((in_8(ppar) & msk) != 0) {
+ printk(KERN_ERR DRV_MODULE_NAME
+ "pin %d on port %d is not general purpose!\n", bit, port);
+ return -EINVAL;
+ }
+
+ *dirp = dir;
+ *datp = dat;
+ *mskp = msk;
+
+ return 0;
+}
+#endif
+
+static inline void bb_set(u8 *p, u8 m)
+{
+ out_8(p, in_8(p) | m);
+}
+
+static inline void bb_clr(u8 *p, u8 m)
+{
+ out_8(p, in_8(p) & ~m);
+}
+
+static inline int bb_read(u8 *p, u8 m)
+{
+ return (in_8(p) & m) != 0;
+}
+
+static inline void mdio_active(struct fs_enet_mii_bus *bus)
+{
+ bb_set(bus->bitbang.mdio_dir, bus->bitbang.mdio_msk);
+}
+
+static inline void mdio_tristate(struct fs_enet_mii_bus *bus)
+{
+ bb_clr(bus->bitbang.mdio_dir, bus->bitbang.mdio_msk);
+}
+
+static inline int mdio_read(struct fs_enet_mii_bus *bus)
+{
+ return bb_read(bus->bitbang.mdio_dat, bus->bitbang.mdio_msk);
+}
+
+static inline void mdio(struct fs_enet_mii_bus *bus, int what)
+{
+ if (what)
+ bb_set(bus->bitbang.mdio_dat, bus->bitbang.mdio_msk);
+ else
+ bb_clr(bus->bitbang.mdio_dat, bus->bitbang.mdio_msk);
+}
+
+static inline void mdc(struct fs_enet_mii_bus *bus, int what)
+{
+ if (what)
+ bb_set(bus->bitbang.mdc_dat, bus->bitbang.mdc_msk);
+ else
+ bb_clr(bus->bitbang.mdc_dat, bus->bitbang.mdc_msk);
+}
+
+static inline void mii_delay(struct fs_enet_mii_bus *bus)
+{
+ udelay(bus->bus_info->i.bitbang.delay);
+}
+
+/* Utility to send the preamble, address, and register (common to read and write). */
+static void bitbang_pre(struct fs_enet_mii_bus *bus, int read, u8 addr, u8 reg)
+{
+ int j;
+
+ /*
+ * Send a 32 bit preamble ('1's) with an extra '1' bit for good measure.
+ * The IEEE spec says this is a PHY optional requirement. The AMD
+ * 79C874 requires one after power up and one after a MII communications
+ * error. This means that we are doing more preambles than we need,
+ * but it is safer and will be much more robust.
+ */
+
+ mdio_active(bus);
+ mdio(bus, 1);
+ for (j = 0; j < 32; j++) {
+ mdc(bus, 0);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+ }
+
+ /* send the start bit (01) and the read opcode (10) or write (10) */
+ mdc(bus, 0);
+ mdio(bus, 0);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+ mdc(bus, 0);
+ mdio(bus, 1);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+ mdc(bus, 0);
+ mdio(bus, read);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+ mdc(bus, 0);
+ mdio(bus, !read);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+
+ /* send the PHY address */
+ for (j = 0; j < 5; j++) {
+ mdc(bus, 0);
+ mdio(bus, (addr & 0x10) != 0);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+ addr <<= 1;
+ }
+
+ /* send the register address */
+ for (j = 0; j < 5; j++) {
+ mdc(bus, 0);
+ mdio(bus, (reg & 0x10) != 0);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+ reg <<= 1;
+ }
+}
+
+static int mii_read(struct fs_enet_mii_bus *bus, int phy_id, int location)
+{
+ u16 rdreg;
+ int ret, j;
+ u8 addr = phy_id & 0xff;
+ u8 reg = location & 0xff;
+
+ bitbang_pre(bus, 1, addr, reg);
+
+ /* tri-state our MDIO I/O pin so we can read */
+ mdc(bus, 0);
+ mdio_tristate(bus);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+
+ /* check the turnaround bit: the PHY should be driving it to zero */
+ if (mdio_read(bus) != 0) {
+ /* PHY didn't drive TA low */
+ for (j = 0; j < 32; j++) {
+ mdc(bus, 0);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+ }
+ ret = -1;
+ goto out;
+ }
+
+ mdc(bus, 0);
+ mii_delay(bus);
+
+ /* read 16 bits of register data, MSB first */
+ rdreg = 0;
+ for (j = 0; j < 16; j++) {
+ mdc(bus, 1);
+ mii_delay(bus);
+ rdreg <<= 1;
+ rdreg |= mdio_read(bus);
+ mdc(bus, 0);
+ mii_delay(bus);
+ }
+
+ mdc(bus, 1);
+ mii_delay(bus);
+ mdc(bus, 0);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+
+ ret = rdreg;
+out:
+ return ret;
+}
+
+static void mii_write(struct fs_enet_mii_bus *bus, int phy_id, int location, int val)
+{
+ int j;
+ u8 addr = phy_id & 0xff;
+ u8 reg = location & 0xff;
+ u16 value = val & 0xffff;
+
+ bitbang_pre(bus, 0, addr, reg);
+
+ /* send the turnaround (10) */
+ mdc(bus, 0);
+ mdio(bus, 1);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+ mdc(bus, 0);
+ mdio(bus, 0);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+
+ /* write 16 bits of register data, MSB first */
+ for (j = 0; j < 16; j++) {
+ mdc(bus, 0);
+ mdio(bus, (value & 0x8000) != 0);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+ value <<= 1;
+ }
+
+ /*
+ * Tri-state the MDIO line.
+ */
+ mdio_tristate(bus);
+ mdc(bus, 0);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+}
+
+int fs_mii_bitbang_init(struct fs_enet_mii_bus *bus)
+{
+ const struct fs_mii_bus_info *bi = bus->bus_info;
+ int r;
+
+ r = bitbang_prep_bit(&bus->bitbang.mdio_dir,
+ &bus->bitbang.mdio_dat,
+ &bus->bitbang.mdio_msk,
+ bi->i.bitbang.mdio_port,
+ bi->i.bitbang.mdio_bit);
+ if (r != 0)
+ return r;
+
+ r = bitbang_prep_bit(&bus->bitbang.mdc_dir,
+ &bus->bitbang.mdc_dat,
+ &bus->bitbang.mdc_msk,
+ bi->i.bitbang.mdc_port,
+ bi->i.bitbang.mdc_bit);
+ if (r != 0)
+ return r;
+
+ bus->mii_read = mii_read;
+ bus->mii_write = mii_write;
+
+ return 0;
+}