ARM i.MX: introduce imx_otg_ulpi_create to create ULPI transceivers
The boards are currently using otg_ulpi_create and mxc_ulpi_access_ops,
both are only present if CONFIG_USB_ULPI is set. To remove the need of
ifdefs in the board code introduce a imx_otg_ulpi_create functions
which expands to a static inline function if compiled without ulpi.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index 6b724c2..759299b 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -209,7 +209,6 @@
};
#endif
-#if defined(CONFIG_USB_ULPI)
static int eukrea_cpuimx27_otg_init(struct platform_device *pdev)
{
return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
@@ -229,7 +228,6 @@
.init = eukrea_cpuimx27_usbh2_init,
.portsc = MXC_EHCI_MODE_ULPI,
};
-#endif
static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
.operating_mode = FSL_USB2_DR_DEVICE,
@@ -283,21 +281,19 @@
platform_device_register(&serial_device);
#endif
-#if defined(CONFIG_USB_ULPI)
if (otg_mode_host) {
- otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-
- imx27_add_mxc_ehci_otg(&otg_pdata);
+ otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+ ULPI_OTG_DRVVBUS_EXT);
+ if (otg_pdata.otg)
+ imx27_add_mxc_ehci_otg(&otg_pdata);
+ } else {
+ imx27_add_fsl_usb2_udc(&otg_device_pdata);
}
- usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-
- imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
-#endif
- if (!otg_mode_host)
- imx27_add_fsl_usb2_udc(&otg_device_pdata);
+ usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+ ULPI_OTG_DRVVBUS_EXT);
+ if (usbh2_pdata.otg)
+ imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
#ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD
eukrea_mbimx27_baseboard_init();
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index f4f2725..614b3c0 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -162,7 +162,6 @@
return 0;
}
-#if defined(CONFIG_USB_ULPI)
static int mx27_3ds_otg_init(struct platform_device *pdev)
{
return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
@@ -172,7 +171,6 @@
.init = mx27_3ds_otg_init,
.portsc = MXC_EHCI_MODE_ULPI,
};
-#endif
static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
.operating_mode = FSL_USB2_DR_DEVICE,
@@ -275,14 +273,15 @@
imx27_add_mxc_mmc(0, &sdhc1_pdata);
imx27_add_imx2_wdt(NULL);
otg_phy_init();
-#if defined(CONFIG_USB_ULPI)
- if (otg_mode_host) {
- otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
- imx27_add_mxc_ehci_otg(&otg_pdata);
+ if (otg_mode_host) {
+ otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+ ULPI_OTG_DRVVBUS_EXT);
+
+ if (otg_pdata.otg)
+ imx27_add_mxc_ehci_otg(&otg_pdata);
}
-#endif
+
if (!otg_mode_host)
imx27_add_fsl_usb2_udc(&otg_device_pdata);
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index f754bab..63e1825 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -267,7 +267,6 @@
.exit = pca100_sdhc2_exit,
};
-#if defined(CONFIG_USB_ULPI)
static int otg_phy_init(struct platform_device *pdev)
{
gpio_set_value(OTG_PHY_CS_GPIO, 0);
@@ -295,7 +294,6 @@
.init = usbh2_phy_init,
.portsc = MXC_EHCI_MODE_ULPI,
};
-#endif
static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
.operating_mode = FSL_USB2_DR_DEVICE,
@@ -402,23 +400,22 @@
gpio_request(USBH2_PHY_CS_GPIO, "usb-host2-cs");
gpio_direction_output(USBH2_PHY_CS_GPIO, 1);
-#if defined(CONFIG_USB_ULPI)
if (otg_mode_host) {
- otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
+ otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+ ULPI_OTG_DRVVBUS_EXT);
- imx27_add_mxc_ehci_otg(&otg_pdata);
+ if (otg_pdata.otg)
+ imx27_add_mxc_ehci_otg(&otg_pdata);
+ } else {
+ gpio_set_value(OTG_PHY_CS_GPIO, 0);
+ imx27_add_fsl_usb2_udc(&otg_device_pdata);
}
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
- imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
-#endif
- if (!otg_mode_host) {
- gpio_set_value(OTG_PHY_CS_GPIO, 0);
- imx27_add_fsl_usb2_udc(&otg_device_pdata);
- }
+ if (usbh2_pdata.otg)
+ imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
imx27_add_imx_fb(&pca100_fb_data);
diff --git a/arch/arm/mach-mx3/mach-armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c
index 34e619e..226829b 100644
--- a/arch/arm/mach-mx3/mach-armadillo5x0.c
+++ b/arch/arm/mach-mx3/mach-armadillo5x0.c
@@ -133,7 +133,6 @@
};
/* USB */
-#if defined(CONFIG_USB_ULPI)
#define OTG_RESET IOMUX_TO_GPIO(MX31_PIN_STXD4)
#define USBH2_RESET IOMUX_TO_GPIO(MX31_PIN_SCK6)
@@ -256,7 +255,6 @@
.init = usbh2_init,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
};
-#endif /* CONFIG_USB_ULPI */
/* RTC over I2C*/
#define ARMADILLO5X0_RTC_GPIO IOMUX_TO_GPIO(MX31_PIN_SRXD4)
@@ -549,15 +547,15 @@
i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1);
/* USB */
-#if defined(CONFIG_USB_ULPI)
- usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
- usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
- imx31_add_mxc_ehci_otg(&usbotg_pdata);
- imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-#endif
+ usbotg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+ ULPI_OTG_DRVVBUS_EXT);
+ if (usbotg_pdata.otg)
+ imx31_add_mxc_ehci_otg(&usbotg_pdata);
+ usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+ ULPI_OTG_DRVVBUS_EXT);
+ if (usbh2_pdata.otg)
+ imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
}
static void __init armadillo5x0_timer_init(void)
diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c
index 35fdb2a..f1dbb9d 100644
--- a/arch/arm/mach-mx3/mach-mx31_3ds.c
+++ b/arch/arm/mach-mx3/mach-mx31_3ds.c
@@ -244,7 +244,6 @@
return err;
}
-#if defined(CONFIG_USB_ULPI)
static int mx31_3ds_otg_init(struct platform_device *pdev)
{
return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
@@ -300,7 +299,6 @@
.init = mx31_3ds_host2_init,
.portsc = MXC_EHCI_MODE_ULPI,
};
-#endif
static const struct fsl_usb2_platform_data usbotg_pdata __initconst = {
.operating_mode = FSL_USB2_DR_DEVICE,
@@ -345,17 +343,17 @@
imx31_add_imx_keypad(&mx31_3ds_keymap_data);
mx31_3ds_usbotg_init();
-#if defined(CONFIG_USB_ULPI)
if (otg_mode_host) {
- otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-
- imx31_add_mxc_ehci_otg(&otg_pdata);
+ otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+ ULPI_OTG_DRVVBUS_EXT);
+ if (otg_pdata.otg)
+ imx31_add_mxc_ehci_otg(&otg_pdata);
}
- usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
- imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-#endif
+ usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+ ULPI_OTG_DRVVBUS_EXT);
+ if (usbh2_pdata.otg)
+ imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
+
if (!otg_mode_host)
imx31_add_fsl_usb2_udc(&usbotg_pdata);
diff --git a/arch/arm/mach-mx3/mach-mx31lilly.c b/arch/arm/mach-mx3/mach-mx31lilly.c
index e2f9de1..ed95745 100644
--- a/arch/arm/mach-mx3/mach-mx31lilly.c
+++ b/arch/arm/mach-mx3/mach-mx31lilly.c
@@ -111,8 +111,6 @@
/* USB */
-#if defined(CONFIG_USB_ULPI)
-
#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
@@ -197,16 +195,13 @@
static void lilly1131_usb_init(void)
{
- usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-
imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
- imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-}
-#else
-static inline void lilly1131_usb_init(void) {}
-#endif /* CONFIG_USB_ULPI */
+ usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+ ULPI_OTG_DRVVBUS_EXT);
+ if (usbh2_pdata.otg)
+ imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
+}
/* SPI */
diff --git a/arch/arm/mach-mx3/mach-mx31lite.c b/arch/arm/mach-mx3/mach-mx31lite.c
index 81021bf..24a21a3 100644
--- a/arch/arm/mach-mx3/mach-mx31lite.c
+++ b/arch/arm/mach-mx3/mach-mx31lite.c
@@ -130,7 +130,6 @@
* USB
*/
-#if defined(CONFIG_USB_ULPI)
#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
@@ -177,7 +176,6 @@
.init = usbh2_init,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
};
-#endif
/*
* NOR flash
@@ -254,13 +252,11 @@
imx31_add_spi_imx1(&spi1_pdata);
spi_register_board_info(&mc13783_spi_dev, 1);
-#if defined(CONFIG_USB_ULPI)
/* USB */
- usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-
- imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-#endif
+ usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+ ULPI_OTG_DRVVBUS_EXT);
+ if (usbh2_pdata.otg)
+ imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
/* SMSC9117 IRQ pin */
ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c
index 845d0b6..6f3692b 100644
--- a/arch/arm/mach-mx3/mach-mx31moboard.c
+++ b/arch/arm/mach-mx3/mach-mx31moboard.c
@@ -400,7 +400,6 @@
mdelay(1);
}
-#if defined(CONFIG_USB_ULPI)
static int moboard_usbh2_init_hw(struct platform_device *pdev)
{
return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
@@ -415,8 +414,10 @@
{
struct platform_device *pdev;
- usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
+ usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+ ULPI_OTG_DRVVBUS_EXT);
+ if (!usbh2_pdata.otg)
+ return -ENODEV;
pdev = imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
if (IS_ERR(pdev))
@@ -424,10 +425,6 @@
return 0;
}
-#else
-static inline int moboard_usbh2_init(void) { return 0; }
-#endif
-
static struct gpio_led mx31moboard_leds[] = {
{
diff --git a/arch/arm/mach-mx3/mach-pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c
index 783d31b..f07d3bd 100644
--- a/arch/arm/mach-mx3/mach-pcm037.c
+++ b/arch/arm/mach-mx3/mach-pcm037.c
@@ -533,7 +533,6 @@
.num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
};
-#if defined(CONFIG_USB_ULPI)
static int pcm037_otg_init(struct platform_device *pdev)
{
return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
@@ -553,7 +552,6 @@
.init = pcm037_usbh2_init,
.portsc = MXC_EHCI_MODE_ULPI,
};
-#endif
static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
.operating_mode = FSL_USB2_DR_DEVICE,
@@ -656,19 +654,18 @@
platform_device_register(&pcm970_sja1000);
-#if defined(CONFIG_USB_ULPI)
if (otg_mode_host) {
- otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-
- imx31_add_mxc_ehci_otg(&otg_pdata);
+ otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+ ULPI_OTG_DRVVBUS_EXT);
+ if (otg_pdata.otg)
+ imx31_add_mxc_ehci_otg(&otg_pdata);
}
- usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
+ usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+ ULPI_OTG_DRVVBUS_EXT);
+ if (usbh2_pdata.otg)
+ imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
- imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-#endif
if (!otg_mode_host)
imx31_add_fsl_usb2_udc(&otg_device_pdata);
diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c
index 262af17..b3ecfb2 100644
--- a/arch/arm/mach-mx3/mach-pcm043.c
+++ b/arch/arm/mach-mx3/mach-pcm043.c
@@ -305,7 +305,6 @@
.hw_ecc = 1,
};
-#if defined(CONFIG_USB_ULPI)
static int pcm043_otg_init(struct platform_device *pdev)
{
return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
@@ -315,7 +314,6 @@
.init = pcm043_otg_init,
.portsc = MXC_EHCI_MODE_UTMI,
};
-#endif
static int pcm043_usbh1_init(struct platform_device *pdev)
{
@@ -385,14 +383,12 @@
mxc_register_device(&mx3_ipu, &mx3_ipu_data);
mxc_register_device(&mx3_fb, &mx3fb_pdata);
-#if defined(CONFIG_USB_ULPI)
if (otg_mode_host) {
- otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-
- imx35_add_mxc_ehci_otg(&otg_pdata);
+ otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+ ULPI_OTG_DRVVBUS_EXT);
+ if (otg_pdata.otg)
+ imx35_add_mxc_ehci_otg(&otg_pdata);
}
-#endif
imx35_add_mxc_ehci_hs(&usbh1_pdata);
if (!otg_mode_host)
diff --git a/arch/arm/mach-mx3/mx31moboard-smartbot.c b/arch/arm/mach-mx3/mx31moboard-smartbot.c
index 87d556f..35f806e 100644
--- a/arch/arm/mach-mx3/mx31moboard-smartbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-smartbot.c
@@ -137,8 +137,10 @@
{
struct platform_device *pdev;
- otg_host_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
+ otg_host_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+ ULPI_OTG_DRVVBUS_EXT);
+ if (!otg_host_pdata.otg)
+ return -ENODEV;
pdev = imx31_add_mxc_ehci_otg(&otg_host_pdata);
if (IS_ERR(pdev))
diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c
index 18e29b9..db04ce84 100644
--- a/arch/arm/mach-mx5/board-mx51_efikasb.c
+++ b/arch/arm/mach-mx5/board-mx51_efikasb.c
@@ -129,10 +129,10 @@
static void __init mx51_efikasb_usb(void)
{
- usbh2_config.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT |
- ULPI_OTG_EXTVBUSIND);
- mxc_register_device(&mxc_usbh2_device, &usbh2_config);
+ usbh2_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+ ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND);
+ if (usbh2_config.otg)
+ mxc_register_device(&mxc_usbh2_device, &usbh2_config);
}
static struct gpio_led mx51_efikasb_leds[] = {
diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c
index 74991c9..51a67fc 100644
--- a/arch/arm/mach-mx5/mx51_efika.c
+++ b/arch/arm/mach-mx5/mx51_efika.c
@@ -218,12 +218,12 @@
msleep(1);
gpio_set_value(EFIKA_USB_PHY_RESET, 1);
- usbh1_config.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT |
- ULPI_OTG_EXTVBUSIND);
+ usbh1_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+ ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND);
mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
- mxc_register_device(&mxc_usbh1_device, &usbh1_config);
+ if (usbh1_config.otg)
+ mxc_register_device(&mxc_usbh1_device, &usbh1_config);
}
static struct mtd_partition mx51_efika_spi_nor_partitions[] = {
diff --git a/arch/arm/plat-mxc/include/mach/ulpi.h b/arch/arm/plat-mxc/include/mach/ulpi.h
index 96b6ab4..f9161c9 100644
--- a/arch/arm/plat-mxc/include/mach/ulpi.h
+++ b/arch/arm/plat-mxc/include/mach/ulpi.h
@@ -1,6 +1,15 @@
#ifndef __MACH_ULPI_H
#define __MACH_ULPI_H
+#ifdef CONFIG_USB_ULPI
+struct otg_transceiver *imx_otg_ulpi_create(unsigned int flags);
+#else
+static inline struct otg_transceiver *imx_otg_ulpi_create(unsigned int flags)
+{
+ return NULL;
+}
+#endif
+
extern struct otg_io_access_ops mxc_ulpi_access_ops;
#endif /* __MACH_ULPI_H */
diff --git a/arch/arm/plat-mxc/ulpi.c b/arch/arm/plat-mxc/ulpi.c
index 582c6df..477e45b 100644
--- a/arch/arm/plat-mxc/ulpi.c
+++ b/arch/arm/plat-mxc/ulpi.c
@@ -22,6 +22,7 @@
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
#include <mach/ulpi.h>
@@ -111,3 +112,7 @@
};
EXPORT_SYMBOL_GPL(mxc_ulpi_access_ops);
+struct otg_transceiver *imx_otg_ulpi_create(unsigned int flags)
+{
+ return otg_ulpi_create(&mxc_ulpi_access_ops, flags);
+}