/*
 *  linux/arch/arm/mach-pxa/pxa27x.c
 *
 *  Author:	Nicolas Pitre
 *  Created:	Nov 05, 2002
 *  Copyright:	MontaVista Software Inc.
 *
 * Code specific to PXA27x aka Bulverde.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/suspend.h>
#include <linux/platform_device.h>

#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/arch/irqs.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/ohci.h>
#include <asm/arch/pm.h>
#include <asm/arch/dma.h>

#include "generic.h"
#include "devices.h"
#include "clock.h"

/* Crystal clock: 13MHz */
#define BASE_CLK	13000000

/*
 * Get the clock frequency as reflected by CCSR and the turbo flag.
 * We assume these values have been applied via a fcs.
 * If info is not 0 we also display the current settings.
 */
unsigned int pxa27x_get_clk_frequency_khz(int info)
{
	unsigned long ccsr, clkcfg;
	unsigned int l, L, m, M, n2, N, S;
       	int cccr_a, t, ht, b;

	ccsr = CCSR;
	cccr_a = CCCR & (1 << 25);

	/* Read clkcfg register: it has turbo, b, half-turbo (and f) */
	asm( "mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg) );
	t  = clkcfg & (1 << 0);
	ht = clkcfg & (1 << 2);
	b  = clkcfg & (1 << 3);

	l  = ccsr & 0x1f;
	n2 = (ccsr>>7) & 0xf;
	m  = (l <= 10) ? 1 : (l <= 20) ? 2 : 4;

	L  = l * BASE_CLK;
	N  = (L * n2) / 2;
	M  = (!cccr_a) ? (L/m) : ((b) ? L : (L/2));
	S  = (b) ? L : (L/2);

	if (info) {
		printk( KERN_INFO "Run Mode clock: %d.%02dMHz (*%d)\n",
			L / 1000000, (L % 1000000) / 10000, l );
		printk( KERN_INFO "Turbo Mode clock: %d.%02dMHz (*%d.%d, %sactive)\n",
			N / 1000000, (N % 1000000)/10000, n2 / 2, (n2 % 2)*5,
			(t) ? "" : "in" );
		printk( KERN_INFO "Memory clock: %d.%02dMHz (/%d)\n",
			M / 1000000, (M % 1000000) / 10000, m );
		printk( KERN_INFO "System bus clock: %d.%02dMHz \n",
			S / 1000000, (S % 1000000) / 10000 );
	}

	return (t) ? (N/1000) : (L/1000);
}

/*
 * Return the current mem clock frequency in units of 10kHz as
 * reflected by CCCR[A], B, and L
 */
unsigned int pxa27x_get_memclk_frequency_10khz(void)
{
	unsigned long ccsr, clkcfg;
	unsigned int l, L, m, M;
       	int cccr_a, b;

	ccsr = CCSR;
	cccr_a = CCCR & (1 << 25);

	/* Read clkcfg register: it has turbo, b, half-turbo (and f) */
	asm( "mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg) );
	b = clkcfg & (1 << 3);

	l = ccsr & 0x1f;
	m = (l <= 10) ? 1 : (l <= 20) ? 2 : 4;

	L = l * BASE_CLK;
	M = (!cccr_a) ? (L/m) : ((b) ? L : (L/2));

	return (M / 10000);
}

/*
 * Return the current LCD clock frequency in units of 10kHz as
 */
static unsigned int pxa27x_get_lcdclk_frequency_10khz(void)
{
	unsigned long ccsr;
	unsigned int l, L, k, K;

	ccsr = CCSR;

	l = ccsr & 0x1f;
	k = (l <= 7) ? 1 : (l <= 16) ? 2 : 4;

	L = l * BASE_CLK;
	K = L / k;

	return (K / 10000);
}

static unsigned long clk_pxa27x_lcd_getrate(struct clk *clk)
{
	return pxa27x_get_lcdclk_frequency_10khz() * 10000;
}

static const struct clkops clk_pxa27x_lcd_ops = {
	.enable		= clk_cken_enable,
	.disable	= clk_cken_disable,
	.getrate	= clk_pxa27x_lcd_getrate,
};

static struct clk pxa27x_clks[] = {
	INIT_CK("LCDCLK", LCD,    &clk_pxa27x_lcd_ops, &pxa_device_fb.dev),
	INIT_CK("CAMCLK", CAMERA, &clk_pxa27x_lcd_ops, NULL),

	INIT_CKEN("UARTCLK", FFUART, 14857000, 1, &pxa_device_ffuart.dev),
	INIT_CKEN("UARTCLK", BTUART, 14857000, 1, &pxa_device_btuart.dev),
	INIT_CKEN("UARTCLK", STUART, 14857000, 1, NULL),

	INIT_CKEN("I2SCLK",  I2S,  14682000, 0, &pxa_device_i2s.dev),
	INIT_CKEN("I2CCLK",  I2C,  32842000, 0, &pxa_device_i2c.dev),
	INIT_CKEN("UDCCLK",  USB,  48000000, 5, &pxa_device_udc.dev),
	INIT_CKEN("MMCCLK",  MMC,  19500000, 0, &pxa_device_mci.dev),
	INIT_CKEN("FICPCLK", FICP, 48000000, 0, &pxa_device_ficp.dev),

	INIT_CKEN("USBCLK", USB,    48000000, 0, &pxa27x_device_ohci.dev),
	INIT_CKEN("I2CCLK", PWRI2C, 13000000, 0, &pxa27x_device_i2c_power.dev),
	INIT_CKEN("KBDCLK", KEYPAD, 32768, 0, NULL),

	/*
	INIT_CKEN("PWMCLK",  PWM0, 13000000, 0, NULL),
	INIT_CKEN("SSPCLK",  SSP1, 13000000, 0, NULL),
	INIT_CKEN("SSPCLK",  SSP2, 13000000, 0, NULL),
	INIT_CKEN("SSPCLK",  SSP3, 13000000, 0, NULL),
	INIT_CKEN("MSLCLK",  MSL,  48000000, 0, NULL),
	INIT_CKEN("USIMCLK", USIM, 48000000, 0, NULL),
	INIT_CKEN("MSTKCLK", MEMSTK, 19500000, 0, NULL),
	INIT_CKEN("IMCLK",   IM,   0, 0, NULL),
	INIT_CKEN("MEMCLK",  MEMC, 0, 0, NULL),
	*/
};

#ifdef CONFIG_PM

#define SAVE(x)		sleep_save[SLEEP_SAVE_##x] = x
#define RESTORE(x)	x = sleep_save[SLEEP_SAVE_##x]

#define RESTORE_GPLEVEL(n) do { \
	GPSR##n = sleep_save[SLEEP_SAVE_GPLR##n]; \
	GPCR##n = ~sleep_save[SLEEP_SAVE_GPLR##n]; \
} while (0)

/*
 * List of global PXA peripheral registers to preserve.
 * More ones like CP and general purpose register values are preserved
 * with the stack pointer in sleep.S.
 */
enum {	SLEEP_SAVE_START = 0,

	SLEEP_SAVE_GPLR0, SLEEP_SAVE_GPLR1, SLEEP_SAVE_GPLR2, SLEEP_SAVE_GPLR3,
	SLEEP_SAVE_GPDR0, SLEEP_SAVE_GPDR1, SLEEP_SAVE_GPDR2, SLEEP_SAVE_GPDR3,
	SLEEP_SAVE_GRER0, SLEEP_SAVE_GRER1, SLEEP_SAVE_GRER2, SLEEP_SAVE_GRER3,
	SLEEP_SAVE_GFER0, SLEEP_SAVE_GFER1, SLEEP_SAVE_GFER2, SLEEP_SAVE_GFER3,
	SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2, SLEEP_SAVE_PGSR3,

	SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U,
	SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR1_U,
	SLEEP_SAVE_GAFR2_L, SLEEP_SAVE_GAFR2_U,
	SLEEP_SAVE_GAFR3_L, SLEEP_SAVE_GAFR3_U,

	SLEEP_SAVE_PSTR,

	SLEEP_SAVE_ICMR,
	SLEEP_SAVE_CKEN,

	SLEEP_SAVE_MDREFR,
	SLEEP_SAVE_PWER, SLEEP_SAVE_PCFR, SLEEP_SAVE_PRER,
	SLEEP_SAVE_PFER, SLEEP_SAVE_PKWR,

	SLEEP_SAVE_SIZE
};

void pxa27x_cpu_pm_save(unsigned long *sleep_save)
{
	SAVE(GPLR0); SAVE(GPLR1); SAVE(GPLR2); SAVE(GPLR3);
	SAVE(GPDR0); SAVE(GPDR1); SAVE(GPDR2); SAVE(GPDR3);
	SAVE(GRER0); SAVE(GRER1); SAVE(GRER2); SAVE(GRER3);
	SAVE(GFER0); SAVE(GFER1); SAVE(GFER2); SAVE(GFER3);
	SAVE(PGSR0); SAVE(PGSR1); SAVE(PGSR2); SAVE(PGSR3);

	SAVE(GAFR0_L); SAVE(GAFR0_U);
	SAVE(GAFR1_L); SAVE(GAFR1_U);
	SAVE(GAFR2_L); SAVE(GAFR2_U);
	SAVE(GAFR3_L); SAVE(GAFR3_U);

	SAVE(MDREFR);
	SAVE(PWER); SAVE(PCFR); SAVE(PRER);
	SAVE(PFER); SAVE(PKWR);

	SAVE(ICMR); ICMR = 0;
	SAVE(CKEN);
	SAVE(PSTR);

	/* Clear GPIO transition detect bits */
	GEDR0 = GEDR0; GEDR1 = GEDR1; GEDR2 = GEDR2; GEDR3 = GEDR3;
}

void pxa27x_cpu_pm_restore(unsigned long *sleep_save)
{
	/* ensure not to come back here if it wasn't intended */
	PSPR = 0;

	/* restore registers */
	RESTORE_GPLEVEL(0); RESTORE_GPLEVEL(1);
	RESTORE_GPLEVEL(2); RESTORE_GPLEVEL(3);
	RESTORE(GPDR0); RESTORE(GPDR1); RESTORE(GPDR2); RESTORE(GPDR3);
	RESTORE(GAFR0_L); RESTORE(GAFR0_U);
	RESTORE(GAFR1_L); RESTORE(GAFR1_U);
	RESTORE(GAFR2_L); RESTORE(GAFR2_U);
	RESTORE(GAFR3_L); RESTORE(GAFR3_U);
	RESTORE(GRER0); RESTORE(GRER1); RESTORE(GRER2); RESTORE(GRER3);
	RESTORE(GFER0); RESTORE(GFER1); RESTORE(GFER2); RESTORE(GFER3);
	RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2); RESTORE(PGSR3);

	RESTORE(MDREFR);
	RESTORE(PWER); RESTORE(PCFR); RESTORE(PRER);
	RESTORE(PFER); RESTORE(PKWR);

	PSSR = PSSR_RDH | PSSR_PH;

	RESTORE(CKEN);

	ICLR = 0;
	ICCR = 1;
	RESTORE(ICMR);
	RESTORE(PSTR);
}

void pxa27x_cpu_pm_enter(suspend_state_t state)
{
	extern void pxa_cpu_standby(void);

	if (state == PM_SUSPEND_STANDBY)
		CKEN = (1 << CKEN_MEMC) | (1 << CKEN_OSTIMER) |
			(1 << CKEN_LCD) | (1 << CKEN_PWM0);
	else
		CKEN = (1 << CKEN_MEMC) | (1 << CKEN_OSTIMER);

	/* ensure voltage-change sequencer not initiated, which hangs */
	PCFR &= ~PCFR_FVC;

	/* Clear edge-detect status register. */
	PEDR = 0xDF12FE1B;

	switch (state) {
	case PM_SUSPEND_STANDBY:
		pxa_cpu_standby();
		break;
	case PM_SUSPEND_MEM:
		/* set resume return address */
		PSPR = virt_to_phys(pxa_cpu_resume);
		pxa27x_cpu_suspend(PWRMODE_SLEEP);
		break;
	}
}

static int pxa27x_cpu_pm_valid(suspend_state_t state)
{
	return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY;
}

static struct pxa_cpu_pm_fns pxa27x_cpu_pm_fns = {
	.save_size	= SLEEP_SAVE_SIZE,
	.save		= pxa27x_cpu_pm_save,
	.restore	= pxa27x_cpu_pm_restore,
	.valid		= pxa27x_cpu_pm_valid,
	.enter		= pxa27x_cpu_pm_enter,
};

static void __init pxa27x_init_pm(void)
{
	pxa_cpu_pm_fns = &pxa27x_cpu_pm_fns;
}
#endif

/* PXA27x:  Various gpios can issue wakeup events.  This logic only
 * handles the simple cases, not the WEMUX2 and WEMUX3 options
 */
#define PXA27x_GPIO_NOWAKE_MASK \
        ((1 << 8) | (1 << 7) | (1 << 6) | (1 << 5) | (1 << 2))
#define WAKEMASK(gpio) \
        (((gpio) <= 15) \
                 ? ((1 << (gpio)) & ~PXA27x_GPIO_NOWAKE_MASK) \
                 : ((gpio == 35) ? (1 << 24) : 0))

static int pxa27x_set_wake(unsigned int irq, unsigned int on)
{
	int gpio = IRQ_TO_GPIO(irq);
	uint32_t mask;

	if ((gpio >= 0 && gpio <= 15) || (gpio == 35)) {
		if (WAKEMASK(gpio) == 0)
			return -EINVAL;

		mask = WAKEMASK(gpio);

		if (on) {
			if (GRER(gpio) | GPIO_bit(gpio))
				PRER |= mask;
			else
				PRER &= ~mask;

			if (GFER(gpio) | GPIO_bit(gpio))
				PFER |= mask;
			else
				PFER &= ~mask;
		}
		goto set_pwer;
	}

	switch (irq) {
	case IRQ_RTCAlrm:
		mask = PWER_RTC;
		break;
	case IRQ_USB:
		mask = 1u << 26;
		break;
	default:
		return -EINVAL;
	}

set_pwer:
	if (on)
		PWER |= mask;
	else
		PWER &=~mask;

	return 0;
}

void __init pxa27x_init_irq(void)
{
	pxa_init_irq_low();
	pxa_init_irq_high();
	pxa_init_irq_gpio(128);
	pxa_init_irq_set_wake(pxa27x_set_wake);
}

/*
 * device registration specific to PXA27x.
 */

static u64 pxa27x_dmamask = 0xffffffffUL;

static struct resource pxa27x_ohci_resources[] = {
	[0] = {
		.start  = 0x4C000000,
		.end    = 0x4C00ff6f,
		.flags  = IORESOURCE_MEM,
	},
	[1] = {
		.start  = IRQ_USBH1,
		.end    = IRQ_USBH1,
		.flags  = IORESOURCE_IRQ,
	},
};

struct platform_device pxa27x_device_ohci = {
	.name		= "pxa27x-ohci",
	.id		= -1,
	.dev		= {
		.dma_mask = &pxa27x_dmamask,
		.coherent_dma_mask = 0xffffffff,
	},
	.num_resources  = ARRAY_SIZE(pxa27x_ohci_resources),
	.resource       = pxa27x_ohci_resources,
};

void __init pxa_set_ohci_info(struct pxaohci_platform_data *info)
{
	pxa27x_device_ohci.dev.platform_data = info;
}

static struct resource i2c_power_resources[] = {
	{
		.start	= 0x40f00180,
		.end	= 0x40f001a3,
		.flags	= IORESOURCE_MEM,
	}, {
		.start	= IRQ_PWRI2C,
		.end	= IRQ_PWRI2C,
		.flags	= IORESOURCE_IRQ,
	},
};

struct platform_device pxa27x_device_i2c_power = {
	.name		= "pxa2xx-i2c",
	.id		= 1,
	.resource	= i2c_power_resources,
	.num_resources	= ARRAY_SIZE(i2c_power_resources),
};

static struct platform_device *devices[] __initdata = {
	&pxa_device_mci,
	&pxa_device_udc,
	&pxa_device_fb,
	&pxa_device_ffuart,
	&pxa_device_btuart,
	&pxa_device_stuart,
	&pxa_device_i2c,
	&pxa_device_i2s,
	&pxa_device_ficp,
	&pxa_device_rtc,
	&pxa27x_device_i2c_power,
	&pxa27x_device_ohci,
};

static int __init pxa27x_init(void)
{
	int ret = 0;
	if (cpu_is_pxa27x()) {
		clks_register(pxa27x_clks, ARRAY_SIZE(pxa27x_clks));

		if ((ret = pxa_init_dma(32)))
			return ret;
#ifdef CONFIG_PM
		pxa27x_init_pm();
#endif
		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
	}
	return ret;
}

subsys_initcall(pxa27x_init);