| /* |
| * Intel Wireless Multicomm 3200 WiFi driver |
| * |
| * Copyright (C) 2009 Intel Corporation <ilw@linux.intel.com> |
| * Samuel Ortiz <samuel.ortiz@intel.com> |
| * Zhu Yi <yi.zhu@intel.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License version |
| * 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA |
| * 02110-1301, USA. |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/wireless.h> |
| #include <linux/ieee80211.h> |
| #include <net/cfg80211.h> |
| |
| #include "iwm.h" |
| #include "commands.h" |
| #include "cfg80211.h" |
| #include "debug.h" |
| |
| #define RATETAB_ENT(_rate, _rateid, _flags) \ |
| { \ |
| .bitrate = (_rate), \ |
| .hw_value = (_rateid), \ |
| .flags = (_flags), \ |
| } |
| |
| #define CHAN2G(_channel, _freq, _flags) { \ |
| .band = IEEE80211_BAND_2GHZ, \ |
| .center_freq = (_freq), \ |
| .hw_value = (_channel), \ |
| .flags = (_flags), \ |
| .max_antenna_gain = 0, \ |
| .max_power = 30, \ |
| } |
| |
| #define CHAN5G(_channel, _flags) { \ |
| .band = IEEE80211_BAND_5GHZ, \ |
| .center_freq = 5000 + (5 * (_channel)), \ |
| .hw_value = (_channel), \ |
| .flags = (_flags), \ |
| .max_antenna_gain = 0, \ |
| .max_power = 30, \ |
| } |
| |
| static struct ieee80211_rate iwm_rates[] = { |
| RATETAB_ENT(10, 0x1, 0), |
| RATETAB_ENT(20, 0x2, 0), |
| RATETAB_ENT(55, 0x4, 0), |
| RATETAB_ENT(110, 0x8, 0), |
| RATETAB_ENT(60, 0x10, 0), |
| RATETAB_ENT(90, 0x20, 0), |
| RATETAB_ENT(120, 0x40, 0), |
| RATETAB_ENT(180, 0x80, 0), |
| RATETAB_ENT(240, 0x100, 0), |
| RATETAB_ENT(360, 0x200, 0), |
| RATETAB_ENT(480, 0x400, 0), |
| RATETAB_ENT(540, 0x800, 0), |
| }; |
| |
| #define iwm_a_rates (iwm_rates + 4) |
| #define iwm_a_rates_size 8 |
| #define iwm_g_rates (iwm_rates + 0) |
| #define iwm_g_rates_size 12 |
| |
| static struct ieee80211_channel iwm_2ghz_channels[] = { |
| CHAN2G(1, 2412, 0), |
| CHAN2G(2, 2417, 0), |
| CHAN2G(3, 2422, 0), |
| CHAN2G(4, 2427, 0), |
| CHAN2G(5, 2432, 0), |
| CHAN2G(6, 2437, 0), |
| CHAN2G(7, 2442, 0), |
| CHAN2G(8, 2447, 0), |
| CHAN2G(9, 2452, 0), |
| CHAN2G(10, 2457, 0), |
| CHAN2G(11, 2462, 0), |
| CHAN2G(12, 2467, 0), |
| CHAN2G(13, 2472, 0), |
| CHAN2G(14, 2484, 0), |
| }; |
| |
| static struct ieee80211_channel iwm_5ghz_a_channels[] = { |
| CHAN5G(34, 0), CHAN5G(36, 0), |
| CHAN5G(38, 0), CHAN5G(40, 0), |
| CHAN5G(42, 0), CHAN5G(44, 0), |
| CHAN5G(46, 0), CHAN5G(48, 0), |
| CHAN5G(52, 0), CHAN5G(56, 0), |
| CHAN5G(60, 0), CHAN5G(64, 0), |
| CHAN5G(100, 0), CHAN5G(104, 0), |
| CHAN5G(108, 0), CHAN5G(112, 0), |
| CHAN5G(116, 0), CHAN5G(120, 0), |
| CHAN5G(124, 0), CHAN5G(128, 0), |
| CHAN5G(132, 0), CHAN5G(136, 0), |
| CHAN5G(140, 0), CHAN5G(149, 0), |
| CHAN5G(153, 0), CHAN5G(157, 0), |
| CHAN5G(161, 0), CHAN5G(165, 0), |
| CHAN5G(184, 0), CHAN5G(188, 0), |
| CHAN5G(192, 0), CHAN5G(196, 0), |
| CHAN5G(200, 0), CHAN5G(204, 0), |
| CHAN5G(208, 0), CHAN5G(212, 0), |
| CHAN5G(216, 0), |
| }; |
| |
| static struct ieee80211_supported_band iwm_band_2ghz = { |
| .channels = iwm_2ghz_channels, |
| .n_channels = ARRAY_SIZE(iwm_2ghz_channels), |
| .bitrates = iwm_g_rates, |
| .n_bitrates = iwm_g_rates_size, |
| }; |
| |
| static struct ieee80211_supported_band iwm_band_5ghz = { |
| .channels = iwm_5ghz_a_channels, |
| .n_channels = ARRAY_SIZE(iwm_5ghz_a_channels), |
| .bitrates = iwm_a_rates, |
| .n_bitrates = iwm_a_rates_size, |
| }; |
| |
| static int iwm_key_init(struct iwm_key *key, u8 key_index, |
| const u8 *mac_addr, struct key_params *params) |
| { |
| key->hdr.key_idx = key_index; |
| if (!mac_addr || is_broadcast_ether_addr(mac_addr)) { |
| key->hdr.multicast = 1; |
| memset(key->hdr.mac, 0xff, ETH_ALEN); |
| } else { |
| key->hdr.multicast = 0; |
| memcpy(key->hdr.mac, mac_addr, ETH_ALEN); |
| } |
| |
| if (params) { |
| if (params->key_len > WLAN_MAX_KEY_LEN || |
| params->seq_len > IW_ENCODE_SEQ_MAX_SIZE) |
| return -EINVAL; |
| |
| key->cipher = params->cipher; |
| key->key_len = params->key_len; |
| key->seq_len = params->seq_len; |
| memcpy(key->key, params->key, key->key_len); |
| memcpy(key->seq, params->seq, key->seq_len); |
| } |
| |
| return 0; |
| } |
| |
| static int iwm_reset_profile(struct iwm_priv *iwm) |
| { |
| int ret; |
| |
| if (!iwm->umac_profile_active) |
| return 0; |
| |
| /* |
| * If there is a current active profile, but no |
| * default key, it's not worth trying to associate again. |
| */ |
| if (iwm->default_key < 0) |
| return 0; |
| |
| /* |
| * Here we have an active profile, but a key setting changed. |
| * We thus have to invalidate the current profile, and push the |
| * new one. Keys will be pushed when association takes place. |
| */ |
| ret = iwm_invalidate_mlme_profile(iwm); |
| if (ret < 0) { |
| IWM_ERR(iwm, "Couldn't invalidate profile\n"); |
| return ret; |
| } |
| |
| return iwm_send_mlme_profile(iwm); |
| } |
| |
| static int iwm_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev, |
| u8 key_index, const u8 *mac_addr, |
| struct key_params *params) |
| { |
| struct iwm_priv *iwm = ndev_to_iwm(ndev); |
| struct iwm_key *key = &iwm->keys[key_index]; |
| int ret; |
| |
| IWM_DBG_WEXT(iwm, DBG, "Adding key for %pM\n", mac_addr); |
| |
| memset(key, 0, sizeof(struct iwm_key)); |
| ret = iwm_key_init(key, key_index, mac_addr, params); |
| if (ret < 0) { |
| IWM_ERR(iwm, "Invalid key_params\n"); |
| return ret; |
| } |
| |
| /* |
| * The WEP keys can be set before or after setting the essid. |
| * We need to handle both cases by simply pushing the keys after |
| * we send the profile. |
| * If the profile is not set yet (i.e. we're pushing keys before |
| * the essid), we set the cipher appropriately. |
| * If the profile is set, we havent associated yet because our |
| * cipher was incorrectly set. So we invalidate and send the |
| * profile again. |
| */ |
| if (key->cipher == WLAN_CIPHER_SUITE_WEP40 || |
| key->cipher == WLAN_CIPHER_SUITE_WEP104) { |
| u8 *ucast_cipher = &iwm->umac_profile->sec.ucast_cipher; |
| u8 *mcast_cipher = &iwm->umac_profile->sec.mcast_cipher; |
| |
| IWM_DBG_WEXT(iwm, DBG, "WEP key\n"); |
| |
| if (key->cipher == WLAN_CIPHER_SUITE_WEP40) |
| *ucast_cipher = *mcast_cipher = UMAC_CIPHER_TYPE_WEP_40; |
| if (key->cipher == WLAN_CIPHER_SUITE_WEP104) |
| *ucast_cipher = *mcast_cipher = |
| UMAC_CIPHER_TYPE_WEP_104; |
| |
| return iwm_reset_profile(iwm); |
| } |
| |
| return iwm_set_key(iwm, 0, key); |
| } |
| |
| static int iwm_cfg80211_get_key(struct wiphy *wiphy, struct net_device *ndev, |
| u8 key_index, const u8 *mac_addr, void *cookie, |
| void (*callback)(void *cookie, |
| struct key_params*)) |
| { |
| struct iwm_priv *iwm = ndev_to_iwm(ndev); |
| struct iwm_key *key = &iwm->keys[key_index]; |
| struct key_params params; |
| |
| IWM_DBG_WEXT(iwm, DBG, "Getting key %d\n", key_index); |
| |
| memset(¶ms, 0, sizeof(params)); |
| |
| params.cipher = key->cipher; |
| params.key_len = key->key_len; |
| params.seq_len = key->seq_len; |
| params.seq = key->seq; |
| params.key = key->key; |
| |
| callback(cookie, ¶ms); |
| |
| return key->key_len ? 0 : -ENOENT; |
| } |
| |
| |
| static int iwm_cfg80211_del_key(struct wiphy *wiphy, struct net_device *ndev, |
| u8 key_index, const u8 *mac_addr) |
| { |
| struct iwm_priv *iwm = ndev_to_iwm(ndev); |
| struct iwm_key *key = &iwm->keys[key_index]; |
| |
| if (!iwm->keys[key_index].key_len) { |
| IWM_DBG_WEXT(iwm, DBG, "Key %d not used\n", key_index); |
| return 0; |
| } |
| |
| if (key_index == iwm->default_key) |
| iwm->default_key = -1; |
| |
| /* If the interface is down, we just cache this */ |
| if (!test_bit(IWM_STATUS_READY, &iwm->status)) |
| return 0; |
| |
| return iwm_set_key(iwm, 1, key); |
| } |
| |
| static int iwm_cfg80211_set_default_key(struct wiphy *wiphy, |
| struct net_device *ndev, |
| u8 key_index) |
| { |
| struct iwm_priv *iwm = ndev_to_iwm(ndev); |
| int ret; |
| |
| IWM_DBG_WEXT(iwm, DBG, "Default key index is: %d\n", key_index); |
| |
| if (!iwm->keys[key_index].key_len) { |
| IWM_ERR(iwm, "Key %d not used\n", key_index); |
| return -EINVAL; |
| } |
| |
| iwm->default_key = key_index; |
| |
| /* If the interface is down, we just cache this */ |
| if (!test_bit(IWM_STATUS_READY, &iwm->status)) |
| return 0; |
| |
| ret = iwm_set_tx_key(iwm, key_index); |
| if (ret < 0) |
| return ret; |
| |
| return iwm_reset_profile(iwm); |
| } |
| |
| |
| int iwm_cfg80211_inform_bss(struct iwm_priv *iwm) |
| { |
| struct wiphy *wiphy = iwm_to_wiphy(iwm); |
| struct iwm_bss_info *bss, *next; |
| struct iwm_umac_notif_bss_info *umac_bss; |
| struct ieee80211_mgmt *mgmt; |
| struct ieee80211_channel *channel; |
| struct ieee80211_supported_band *band; |
| s32 signal; |
| int freq; |
| |
| list_for_each_entry_safe(bss, next, &iwm->bss_list, node) { |
| umac_bss = bss->bss; |
| mgmt = (struct ieee80211_mgmt *)(umac_bss->frame_buf); |
| |
| if (umac_bss->band == UMAC_BAND_2GHZ) |
| band = wiphy->bands[IEEE80211_BAND_2GHZ]; |
| else if (umac_bss->band == UMAC_BAND_5GHZ) |
| band = wiphy->bands[IEEE80211_BAND_5GHZ]; |
| else { |
| IWM_ERR(iwm, "Invalid band: %d\n", umac_bss->band); |
| return -EINVAL; |
| } |
| |
| freq = ieee80211_channel_to_frequency(umac_bss->channel); |
| channel = ieee80211_get_channel(wiphy, freq); |
| signal = umac_bss->rssi * 100; |
| |
| if (!cfg80211_inform_bss_frame(wiphy, channel, mgmt, |
| le16_to_cpu(umac_bss->frame_len), |
| signal, GFP_KERNEL)) |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int iwm_cfg80211_change_iface(struct wiphy *wiphy, |
| struct net_device *ndev, |
| enum nl80211_iftype type, u32 *flags, |
| struct vif_params *params) |
| { |
| struct wireless_dev *wdev; |
| struct iwm_priv *iwm; |
| u32 old_mode; |
| |
| wdev = ndev->ieee80211_ptr; |
| iwm = ndev_to_iwm(ndev); |
| old_mode = iwm->conf.mode; |
| |
| switch (type) { |
| case NL80211_IFTYPE_STATION: |
| iwm->conf.mode = UMAC_MODE_BSS; |
| break; |
| case NL80211_IFTYPE_ADHOC: |
| iwm->conf.mode = UMAC_MODE_IBSS; |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| wdev->iftype = type; |
| |
| if ((old_mode == iwm->conf.mode) || !iwm->umac_profile) |
| return 0; |
| |
| iwm->umac_profile->mode = cpu_to_le32(iwm->conf.mode); |
| |
| if (iwm->umac_profile_active) { |
| int ret = iwm_invalidate_mlme_profile(iwm); |
| if (ret < 0) |
| IWM_ERR(iwm, "Couldn't invalidate profile\n"); |
| } |
| |
| return 0; |
| } |
| |
| static int iwm_cfg80211_scan(struct wiphy *wiphy, struct net_device *ndev, |
| struct cfg80211_scan_request *request) |
| { |
| struct iwm_priv *iwm = ndev_to_iwm(ndev); |
| int ret; |
| |
| if (!test_bit(IWM_STATUS_READY, &iwm->status)) { |
| IWM_ERR(iwm, "Scan while device is not ready\n"); |
| return -EIO; |
| } |
| |
| if (test_bit(IWM_STATUS_SCANNING, &iwm->status)) { |
| IWM_ERR(iwm, "Scanning already\n"); |
| return -EAGAIN; |
| } |
| |
| if (test_bit(IWM_STATUS_SCAN_ABORTING, &iwm->status)) { |
| IWM_ERR(iwm, "Scanning being aborted\n"); |
| return -EAGAIN; |
| } |
| |
| set_bit(IWM_STATUS_SCANNING, &iwm->status); |
| |
| ret = iwm_scan_ssids(iwm, request->ssids, request->n_ssids); |
| if (ret) { |
| clear_bit(IWM_STATUS_SCANNING, &iwm->status); |
| return ret; |
| } |
| |
| iwm->scan_request = request; |
| return 0; |
| } |
| |
| static int iwm_cfg80211_set_wiphy_params(struct wiphy *wiphy, u32 changed) |
| { |
| struct iwm_priv *iwm = wiphy_to_iwm(wiphy); |
| |
| if (changed & WIPHY_PARAM_RTS_THRESHOLD && |
| (iwm->conf.rts_threshold != wiphy->rts_threshold)) { |
| int ret; |
| |
| iwm->conf.rts_threshold = wiphy->rts_threshold; |
| |
| ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX, |
| CFG_RTS_THRESHOLD, |
| iwm->conf.rts_threshold); |
| if (ret < 0) |
| return ret; |
| } |
| |
| if (changed & WIPHY_PARAM_FRAG_THRESHOLD && |
| (iwm->conf.frag_threshold != wiphy->frag_threshold)) { |
| int ret; |
| |
| iwm->conf.frag_threshold = wiphy->frag_threshold; |
| |
| ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_FA_CFG_FIX, |
| CFG_FRAG_THRESHOLD, |
| iwm->conf.frag_threshold); |
| if (ret < 0) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int iwm_cfg80211_join_ibss(struct wiphy *wiphy, struct net_device *dev, |
| struct cfg80211_ibss_params *params) |
| { |
| struct iwm_priv *iwm = wiphy_to_iwm(wiphy); |
| struct ieee80211_channel *chan = params->channel; |
| struct cfg80211_bss *bss; |
| |
| if (!test_bit(IWM_STATUS_READY, &iwm->status)) |
| return -EIO; |
| |
| /* UMAC doesn't support creating IBSS network with specified bssid. |
| * This should be removed after we have join only mode supported. */ |
| if (params->bssid) |
| return -EOPNOTSUPP; |
| |
| bss = cfg80211_get_ibss(iwm_to_wiphy(iwm), NULL, |
| params->ssid, params->ssid_len); |
| if (!bss) { |
| iwm_scan_one_ssid(iwm, params->ssid, params->ssid_len); |
| schedule_timeout_interruptible(2 * HZ); |
| bss = cfg80211_get_ibss(iwm_to_wiphy(iwm), NULL, |
| params->ssid, params->ssid_len); |
| } |
| /* IBSS join only mode is not supported by UMAC ATM */ |
| if (bss) { |
| cfg80211_put_bss(bss); |
| return -EOPNOTSUPP; |
| } |
| |
| iwm->channel = ieee80211_frequency_to_channel(chan->center_freq); |
| iwm->umac_profile->ibss.band = chan->band; |
| iwm->umac_profile->ibss.channel = iwm->channel; |
| iwm->umac_profile->ssid.ssid_len = params->ssid_len; |
| memcpy(iwm->umac_profile->ssid.ssid, params->ssid, params->ssid_len); |
| |
| if (params->bssid) |
| memcpy(&iwm->umac_profile->bssid[0], params->bssid, ETH_ALEN); |
| |
| return iwm_send_mlme_profile(iwm); |
| } |
| |
| static int iwm_cfg80211_leave_ibss(struct wiphy *wiphy, struct net_device *dev) |
| { |
| struct iwm_priv *iwm = wiphy_to_iwm(wiphy); |
| |
| if (iwm->umac_profile_active) |
| return iwm_invalidate_mlme_profile(iwm); |
| |
| return 0; |
| } |
| |
| static int iwm_cfg80211_set_txpower(struct wiphy *wiphy, |
| enum tx_power_setting type, int dbm) |
| { |
| switch (type) { |
| case TX_POWER_AUTOMATIC: |
| return 0; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| return 0; |
| } |
| |
| static int iwm_cfg80211_get_txpower(struct wiphy *wiphy, int *dbm) |
| { |
| struct iwm_priv *iwm = wiphy_to_iwm(wiphy); |
| |
| *dbm = iwm->txpower; |
| |
| return 0; |
| } |
| |
| static int iwm_cfg80211_set_power_mgmt(struct wiphy *wiphy, |
| struct net_device *dev, |
| bool enabled, int timeout) |
| { |
| struct iwm_priv *iwm = wiphy_to_iwm(wiphy); |
| u32 power_index; |
| |
| if (enabled) |
| power_index = IWM_POWER_INDEX_DEFAULT; |
| else |
| power_index = IWM_POWER_INDEX_MIN; |
| |
| if (power_index == iwm->conf.power_index) |
| return 0; |
| |
| iwm->conf.power_index = power_index; |
| |
| return iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX, |
| CFG_POWER_INDEX, iwm->conf.power_index); |
| } |
| |
| static struct cfg80211_ops iwm_cfg80211_ops = { |
| .change_virtual_intf = iwm_cfg80211_change_iface, |
| .add_key = iwm_cfg80211_add_key, |
| .get_key = iwm_cfg80211_get_key, |
| .del_key = iwm_cfg80211_del_key, |
| .set_default_key = iwm_cfg80211_set_default_key, |
| .scan = iwm_cfg80211_scan, |
| .set_wiphy_params = iwm_cfg80211_set_wiphy_params, |
| .join_ibss = iwm_cfg80211_join_ibss, |
| .leave_ibss = iwm_cfg80211_leave_ibss, |
| .set_tx_power = iwm_cfg80211_set_txpower, |
| .get_tx_power = iwm_cfg80211_get_txpower, |
| .set_power_mgmt = iwm_cfg80211_set_power_mgmt, |
| }; |
| |
| static const u32 cipher_suites[] = { |
| WLAN_CIPHER_SUITE_WEP40, |
| WLAN_CIPHER_SUITE_WEP104, |
| WLAN_CIPHER_SUITE_TKIP, |
| WLAN_CIPHER_SUITE_CCMP, |
| }; |
| |
| struct wireless_dev *iwm_wdev_alloc(int sizeof_bus, struct device *dev) |
| { |
| int ret = 0; |
| struct wireless_dev *wdev; |
| |
| /* |
| * We're trying to have the following memory |
| * layout: |
| * |
| * +-------------------------+ |
| * | struct wiphy | |
| * +-------------------------+ |
| * | struct iwm_priv | |
| * +-------------------------+ |
| * | bus private data | |
| * | (e.g. iwm_priv_sdio) | |
| * +-------------------------+ |
| * |
| */ |
| |
| wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL); |
| if (!wdev) { |
| dev_err(dev, "Couldn't allocate wireless device\n"); |
| return ERR_PTR(-ENOMEM); |
| } |
| |
| wdev->wiphy = wiphy_new(&iwm_cfg80211_ops, |
| sizeof(struct iwm_priv) + sizeof_bus); |
| if (!wdev->wiphy) { |
| dev_err(dev, "Couldn't allocate wiphy device\n"); |
| ret = -ENOMEM; |
| goto out_err_new; |
| } |
| |
| set_wiphy_dev(wdev->wiphy, dev); |
| wdev->wiphy->max_scan_ssids = UMAC_WIFI_IF_PROBE_OPTION_MAX; |
| wdev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | |
| BIT(NL80211_IFTYPE_ADHOC); |
| wdev->wiphy->bands[IEEE80211_BAND_2GHZ] = &iwm_band_2ghz; |
| wdev->wiphy->bands[IEEE80211_BAND_5GHZ] = &iwm_band_5ghz; |
| wdev->wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM; |
| |
| wdev->wiphy->cipher_suites = cipher_suites; |
| wdev->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites); |
| |
| ret = wiphy_register(wdev->wiphy); |
| if (ret < 0) { |
| dev_err(dev, "Couldn't register wiphy device\n"); |
| goto out_err_register; |
| } |
| |
| return wdev; |
| |
| out_err_register: |
| wiphy_free(wdev->wiphy); |
| |
| out_err_new: |
| kfree(wdev); |
| |
| return ERR_PTR(ret); |
| } |
| |
| void iwm_wdev_free(struct iwm_priv *iwm) |
| { |
| struct wireless_dev *wdev = iwm_to_wdev(iwm); |
| |
| if (!wdev) |
| return; |
| |
| wiphy_unregister(wdev->wiphy); |
| wiphy_free(wdev->wiphy); |
| kfree(wdev); |
| } |