mtd: nand: refactor erase_cmd() to return chip status
The nand_chip::erase_cmd callback previously served a dual purpose; for
one, it allowed a per-flash-chip override, so that AG-AND devices could
use a different erase command than other NAND. These AND devices were
dropped in commit 14c6578683367b1e7af0c3c09e872b45a45183a7 (mtd: nand:
remove AG-AND support). On the other hand, some drivers (denali and
doc-g4) need to use this sort of callback to implement
controller-specific erase operations.
To make the latter operation easier for some drivers (e.g., ST's new BCH
NAND driver), it helps if the command dispatch and wait functions can be
lumped together, rather than called separately.
This patch does two things:
1. Pull the call to chip->waitfunc() into chip->erase_cmd(), and return
the status from this callback
2. Rename erase_cmd() to just erase(), since this callback does a
little more than just send a command
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Tested-by: Lee Jones <lee.jones@linaro.org>
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index c07cd57..9f2012a 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -1233,7 +1233,7 @@
return status;
}
-static void denali_erase(struct mtd_info *mtd, int page)
+static int denali_erase(struct mtd_info *mtd, int page)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
@@ -1250,8 +1250,7 @@
irq_status = wait_for_irq(denali, INTR_STATUS__ERASE_COMP |
INTR_STATUS__ERASE_FAIL);
- denali->status = (irq_status & INTR_STATUS__ERASE_FAIL) ?
- NAND_STATUS_FAIL : PASS;
+ return (irq_status & INTR_STATUS__ERASE_FAIL) ? NAND_STATUS_FAIL : PASS;
}
static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
@@ -1584,7 +1583,7 @@
denali->nand.ecc.write_page_raw = denali_write_page_raw;
denali->nand.ecc.read_oob = denali_read_oob;
denali->nand.ecc.write_oob = denali_write_oob;
- denali->nand.erase_cmd = denali_erase;
+ denali->nand.erase = denali_erase;
if (nand_scan_tail(&denali->mtd)) {
ret = -ENXIO;