| /* i915_dma.c -- DMA support for the I915 -*- linux-c -*- |
| */ |
| /* |
| * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas. |
| * All Rights Reserved. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the |
| * "Software"), to deal in the Software without restriction, including |
| * without limitation the rights to use, copy, modify, merge, publish, |
| * distribute, sub license, and/or sell copies of the Software, and to |
| * permit persons to whom the Software is furnished to do so, subject to |
| * the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the |
| * next paragraph) shall be included in all copies or substantial portions |
| * of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS |
| * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. |
| * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR |
| * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, |
| * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE |
| * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. |
| * |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <drm/drmP.h> |
| #include <drm/drm_crtc_helper.h> |
| #include <drm/drm_fb_helper.h> |
| #include "intel_drv.h" |
| #include <drm/i915_drm.h> |
| #include "i915_drv.h" |
| #include "i915_trace.h" |
| #include <linux/pci.h> |
| #include <linux/console.h> |
| #include <linux/vt.h> |
| #include <linux/vgaarb.h> |
| #include <linux/acpi.h> |
| #include <linux/pnp.h> |
| #include <linux/vga_switcheroo.h> |
| #include <linux/slab.h> |
| #include <acpi/video.h> |
| #include <linux/pm.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/oom.h> |
| |
| #define LP_RING(d) (&((struct drm_i915_private *)(d))->ring[RCS]) |
| |
| #define BEGIN_LP_RING(n) \ |
| intel_ring_begin(LP_RING(dev_priv), (n)) |
| |
| #define OUT_RING(x) \ |
| intel_ring_emit(LP_RING(dev_priv), x) |
| |
| #define ADVANCE_LP_RING() \ |
| __intel_ring_advance(LP_RING(dev_priv)) |
| |
| /** |
| * Lock test for when it's just for synchronization of ring access. |
| * |
| * In that case, we don't need to do it when GEM is initialized as nobody else |
| * has access to the ring. |
| */ |
| #define RING_LOCK_TEST_WITH_RETURN(dev, file) do { \ |
| if (LP_RING(dev->dev_private)->buffer->obj == NULL) \ |
| LOCK_TEST_WITH_RETURN(dev, file); \ |
| } while (0) |
| |
| static inline u32 |
| intel_read_legacy_status_page(struct drm_i915_private *dev_priv, int reg) |
| { |
| if (I915_NEED_GFX_HWS(dev_priv->dev)) |
| return ioread32(dev_priv->dri1.gfx_hws_cpu_addr + reg); |
| else |
| return intel_read_status_page(LP_RING(dev_priv), reg); |
| } |
| |
| #define READ_HWSP(dev_priv, reg) intel_read_legacy_status_page(dev_priv, reg) |
| #define READ_BREADCRUMB(dev_priv) READ_HWSP(dev_priv, I915_BREADCRUMB_INDEX) |
| #define I915_BREADCRUMB_INDEX 0x21 |
| |
| void i915_update_dri1_breadcrumb(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_i915_master_private *master_priv; |
| |
| /* |
| * The dri breadcrumb update races against the drm master disappearing. |
| * Instead of trying to fix this (this is by far not the only ums issue) |
| * just don't do the update in kms mode. |
| */ |
| if (drm_core_check_feature(dev, DRIVER_MODESET)) |
| return; |
| |
| if (dev->primary->master) { |
| master_priv = dev->primary->master->driver_priv; |
| if (master_priv->sarea_priv) |
| master_priv->sarea_priv->last_dispatch = |
| READ_BREADCRUMB(dev_priv); |
| } |
| } |
| |
| static void i915_write_hws_pga(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 addr; |
| |
| addr = dev_priv->status_page_dmah->busaddr; |
| if (INTEL_INFO(dev)->gen >= 4) |
| addr |= (dev_priv->status_page_dmah->busaddr >> 28) & 0xf0; |
| I915_WRITE(HWS_PGA, addr); |
| } |
| |
| /** |
| * Frees the hardware status page, whether it's a physical address or a virtual |
| * address set up by the X Server. |
| */ |
| static void i915_free_hws(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_engine_cs *ring = LP_RING(dev_priv); |
| |
| if (dev_priv->status_page_dmah) { |
| drm_pci_free(dev, dev_priv->status_page_dmah); |
| dev_priv->status_page_dmah = NULL; |
| } |
| |
| if (ring->status_page.gfx_addr) { |
| ring->status_page.gfx_addr = 0; |
| iounmap(dev_priv->dri1.gfx_hws_cpu_addr); |
| } |
| |
| /* Need to rewrite hardware status page */ |
| I915_WRITE(HWS_PGA, 0x1ffff000); |
| } |
| |
| void i915_kernel_lost_context(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_i915_master_private *master_priv; |
| struct intel_engine_cs *ring = LP_RING(dev_priv); |
| struct intel_ringbuffer *ringbuf = ring->buffer; |
| |
| /* |
| * We should never lose context on the ring with modesetting |
| * as we don't expose it to userspace |
| */ |
| if (drm_core_check_feature(dev, DRIVER_MODESET)) |
| return; |
| |
| ringbuf->head = I915_READ_HEAD(ring) & HEAD_ADDR; |
| ringbuf->tail = I915_READ_TAIL(ring) & TAIL_ADDR; |
| ringbuf->space = ringbuf->head - (ringbuf->tail + I915_RING_FREE_SPACE); |
| if (ringbuf->space < 0) |
| ringbuf->space += ringbuf->size; |
| |
| if (!dev->primary->master) |
| return; |
| |
| master_priv = dev->primary->master->driver_priv; |
| if (ringbuf->head == ringbuf->tail && master_priv->sarea_priv) |
| master_priv->sarea_priv->perf_boxes |= I915_BOX_RING_EMPTY; |
| } |
| |
| static int i915_dma_cleanup(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int i; |
| |
| /* Make sure interrupts are disabled here because the uninstall ioctl |
| * may not have been called from userspace and after dev_private |
| * is freed, it's too late. |
| */ |
| if (dev->irq_enabled) |
| drm_irq_uninstall(dev); |
| |
| mutex_lock(&dev->struct_mutex); |
| for (i = 0; i < I915_NUM_RINGS; i++) |
| intel_cleanup_ring_buffer(&dev_priv->ring[i]); |
| mutex_unlock(&dev->struct_mutex); |
| |
| /* Clear the HWS virtual address at teardown */ |
| if (I915_NEED_GFX_HWS(dev)) |
| i915_free_hws(dev); |
| |
| return 0; |
| } |
| |
| static int i915_initialize(struct drm_device *dev, drm_i915_init_t *init) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv; |
| int ret; |
| |
| master_priv->sarea = drm_getsarea(dev); |
| if (master_priv->sarea) { |
| master_priv->sarea_priv = (drm_i915_sarea_t *) |
| ((u8 *)master_priv->sarea->handle + init->sarea_priv_offset); |
| } else { |
| DRM_DEBUG_DRIVER("sarea not found assuming DRI2 userspace\n"); |
| } |
| |
| if (init->ring_size != 0) { |
| if (LP_RING(dev_priv)->buffer->obj != NULL) { |
| i915_dma_cleanup(dev); |
| DRM_ERROR("Client tried to initialize ringbuffer in " |
| "GEM mode\n"); |
| return -EINVAL; |
| } |
| |
| ret = intel_render_ring_init_dri(dev, |
| init->ring_start, |
| init->ring_size); |
| if (ret) { |
| i915_dma_cleanup(dev); |
| return ret; |
| } |
| } |
| |
| dev_priv->dri1.cpp = init->cpp; |
| dev_priv->dri1.back_offset = init->back_offset; |
| dev_priv->dri1.front_offset = init->front_offset; |
| dev_priv->dri1.current_page = 0; |
| if (master_priv->sarea_priv) |
| master_priv->sarea_priv->pf_current_page = 0; |
| |
| /* Allow hardware batchbuffers unless told otherwise. |
| */ |
| dev_priv->dri1.allow_batchbuffer = 1; |
| |
| return 0; |
| } |
| |
| static int i915_dma_resume(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_engine_cs *ring = LP_RING(dev_priv); |
| |
| DRM_DEBUG_DRIVER("%s\n", __func__); |
| |
| if (ring->buffer->virtual_start == NULL) { |
| DRM_ERROR("can not ioremap virtual address for" |
| " ring buffer\n"); |
| return -ENOMEM; |
| } |
| |
| /* Program Hardware Status Page */ |
| if (!ring->status_page.page_addr) { |
| DRM_ERROR("Can not find hardware status page\n"); |
| return -EINVAL; |
| } |
| DRM_DEBUG_DRIVER("hw status page @ %p\n", |
| ring->status_page.page_addr); |
| if (ring->status_page.gfx_addr != 0) |
| intel_ring_setup_status_page(ring); |
| else |
| i915_write_hws_pga(dev); |
| |
| DRM_DEBUG_DRIVER("Enabled hardware status page\n"); |
| |
| return 0; |
| } |
| |
| static int i915_dma_init(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| drm_i915_init_t *init = data; |
| int retcode = 0; |
| |
| if (drm_core_check_feature(dev, DRIVER_MODESET)) |
| return -ENODEV; |
| |
| switch (init->func) { |
| case I915_INIT_DMA: |
| retcode = i915_initialize(dev, init); |
| break; |
| case I915_CLEANUP_DMA: |
| retcode = i915_dma_cleanup(dev); |
| break; |
| case I915_RESUME_DMA: |
| retcode = i915_dma_resume(dev); |
| break; |
| default: |
| retcode = -EINVAL; |
| break; |
| } |
| |
| return retcode; |
| } |
| |
| /* Implement basically the same security restrictions as hardware does |
| * for MI_BATCH_NON_SECURE. These can be made stricter at any time. |
| * |
| * Most of the calculations below involve calculating the size of a |
| * particular instruction. It's important to get the size right as |
| * that tells us where the next instruction to check is. Any illegal |
| * instruction detected will be given a size of zero, which is a |
| * signal to abort the rest of the buffer. |
| */ |
| static int validate_cmd(int cmd) |
| { |
| switch (((cmd >> 29) & 0x7)) { |
| case 0x0: |
| switch ((cmd >> 23) & 0x3f) { |
| case 0x0: |
| return 1; /* MI_NOOP */ |
| case 0x4: |
| return 1; /* MI_FLUSH */ |
| default: |
| return 0; /* disallow everything else */ |
| } |
| break; |
| case 0x1: |
| return 0; /* reserved */ |
| case 0x2: |
| return (cmd & 0xff) + 2; /* 2d commands */ |
| case 0x3: |
| if (((cmd >> 24) & 0x1f) <= 0x18) |
| return 1; |
| |
| switch ((cmd >> 24) & 0x1f) { |
| case 0x1c: |
| return 1; |
| case 0x1d: |
| switch ((cmd >> 16) & 0xff) { |
| case 0x3: |
| return (cmd & 0x1f) + 2; |
| case 0x4: |
| return (cmd & 0xf) + 2; |
| default: |
| return (cmd & 0xffff) + 2; |
| } |
| case 0x1e: |
| if (cmd & (1 << 23)) |
| return (cmd & 0xffff) + 1; |
| else |
| return 1; |
| case 0x1f: |
| if ((cmd & (1 << 23)) == 0) /* inline vertices */ |
| return (cmd & 0x1ffff) + 2; |
| else if (cmd & (1 << 17)) /* indirect random */ |
| if ((cmd & 0xffff) == 0) |
| return 0; /* unknown length, too hard */ |
| else |
| return (((cmd & 0xffff) + 1) / 2) + 1; |
| else |
| return 2; /* indirect sequential */ |
| default: |
| return 0; |
| } |
| default: |
| return 0; |
| } |
| |
| return 0; |
| } |
| |
| static int i915_emit_cmds(struct drm_device *dev, int *buffer, int dwords) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int i, ret; |
| |
| if ((dwords+1) * sizeof(int) >= LP_RING(dev_priv)->buffer->size - 8) |
| return -EINVAL; |
| |
| for (i = 0; i < dwords;) { |
| int sz = validate_cmd(buffer[i]); |
| |
| if (sz == 0 || i + sz > dwords) |
| return -EINVAL; |
| i += sz; |
| } |
| |
| ret = BEGIN_LP_RING((dwords+1)&~1); |
| if (ret) |
| return ret; |
| |
| for (i = 0; i < dwords; i++) |
| OUT_RING(buffer[i]); |
| if (dwords & 1) |
| OUT_RING(0); |
| |
| ADVANCE_LP_RING(); |
| |
| return 0; |
| } |
| |
| int |
| i915_emit_box(struct drm_device *dev, |
| struct drm_clip_rect *box, |
| int DR1, int DR4) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int ret; |
| |
| if (box->y2 <= box->y1 || box->x2 <= box->x1 || |
| box->y2 <= 0 || box->x2 <= 0) { |
| DRM_ERROR("Bad box %d,%d..%d,%d\n", |
| box->x1, box->y1, box->x2, box->y2); |
| return -EINVAL; |
| } |
| |
| if (INTEL_INFO(dev)->gen >= 4) { |
| ret = BEGIN_LP_RING(4); |
| if (ret) |
| return ret; |
| |
| OUT_RING(GFX_OP_DRAWRECT_INFO_I965); |
| OUT_RING((box->x1 & 0xffff) | (box->y1 << 16)); |
| OUT_RING(((box->x2 - 1) & 0xffff) | ((box->y2 - 1) << 16)); |
| OUT_RING(DR4); |
| } else { |
| ret = BEGIN_LP_RING(6); |
| if (ret) |
| return ret; |
| |
| OUT_RING(GFX_OP_DRAWRECT_INFO); |
| OUT_RING(DR1); |
| OUT_RING((box->x1 & 0xffff) | (box->y1 << 16)); |
| OUT_RING(((box->x2 - 1) & 0xffff) | ((box->y2 - 1) << 16)); |
| OUT_RING(DR4); |
| OUT_RING(0); |
| } |
| ADVANCE_LP_RING(); |
| |
| return 0; |
| } |
| |
| /* XXX: Emitting the counter should really be moved to part of the IRQ |
| * emit. For now, do it in both places: |
| */ |
| |
| static void i915_emit_breadcrumb(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv; |
| |
| dev_priv->dri1.counter++; |
| if (dev_priv->dri1.counter > 0x7FFFFFFFUL) |
| dev_priv->dri1.counter = 0; |
| if (master_priv->sarea_priv) |
| master_priv->sarea_priv->last_enqueue = dev_priv->dri1.counter; |
| |
| if (BEGIN_LP_RING(4) == 0) { |
| OUT_RING(MI_STORE_DWORD_INDEX); |
| OUT_RING(I915_BREADCRUMB_INDEX << MI_STORE_DWORD_INDEX_SHIFT); |
| OUT_RING(dev_priv->dri1.counter); |
| OUT_RING(0); |
| ADVANCE_LP_RING(); |
| } |
| } |
| |
| static int i915_dispatch_cmdbuffer(struct drm_device *dev, |
| drm_i915_cmdbuffer_t *cmd, |
| struct drm_clip_rect *cliprects, |
| void *cmdbuf) |
| { |
| int nbox = cmd->num_cliprects; |
| int i = 0, count, ret; |
| |
| if (cmd->sz & 0x3) { |
| DRM_ERROR("alignment"); |
| return -EINVAL; |
| } |
| |
| i915_kernel_lost_context(dev); |
| |
| count = nbox ? nbox : 1; |
| |
| for (i = 0; i < count; i++) { |
| if (i < nbox) { |
| ret = i915_emit_box(dev, &cliprects[i], |
| cmd->DR1, cmd->DR4); |
| if (ret) |
| return ret; |
| } |
| |
| ret = i915_emit_cmds(dev, cmdbuf, cmd->sz / 4); |
| if (ret) |
| return ret; |
| } |
| |
| i915_emit_breadcrumb(dev); |
| return 0; |
| } |
| |
| static int i915_dispatch_batchbuffer(struct drm_device *dev, |
| drm_i915_batchbuffer_t *batch, |
| struct drm_clip_rect *cliprects) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int nbox = batch->num_cliprects; |
| int i, count, ret; |
| |
| if ((batch->start | batch->used) & 0x7) { |
| DRM_ERROR("alignment"); |
| return -EINVAL; |
| } |
| |
| i915_kernel_lost_context(dev); |
| |
| count = nbox ? nbox : 1; |
| for (i = 0; i < count; i++) { |
| if (i < nbox) { |
| ret = i915_emit_box(dev, &cliprects[i], |
| batch->DR1, batch->DR4); |
| if (ret) |
| return ret; |
| } |
| |
| if (!IS_I830(dev) && !IS_845G(dev)) { |
| ret = BEGIN_LP_RING(2); |
| if (ret) |
| return ret; |
| |
| if (INTEL_INFO(dev)->gen >= 4) { |
| OUT_RING(MI_BATCH_BUFFER_START | (2 << 6) | MI_BATCH_NON_SECURE_I965); |
| OUT_RING(batch->start); |
| } else { |
| OUT_RING(MI_BATCH_BUFFER_START | (2 << 6)); |
| OUT_RING(batch->start | MI_BATCH_NON_SECURE); |
| } |
| } else { |
| ret = BEGIN_LP_RING(4); |
| if (ret) |
| return ret; |
| |
| OUT_RING(MI_BATCH_BUFFER); |
| OUT_RING(batch->start | MI_BATCH_NON_SECURE); |
| OUT_RING(batch->start + batch->used - 4); |
| OUT_RING(0); |
| } |
| ADVANCE_LP_RING(); |
| } |
| |
| |
| if (IS_G4X(dev) || IS_GEN5(dev)) { |
| if (BEGIN_LP_RING(2) == 0) { |
| OUT_RING(MI_FLUSH | MI_NO_WRITE_FLUSH | MI_INVALIDATE_ISP); |
| OUT_RING(MI_NOOP); |
| ADVANCE_LP_RING(); |
| } |
| } |
| |
| i915_emit_breadcrumb(dev); |
| return 0; |
| } |
| |
| static int i915_dispatch_flip(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_i915_master_private *master_priv = |
| dev->primary->master->driver_priv; |
| int ret; |
| |
| if (!master_priv->sarea_priv) |
| return -EINVAL; |
| |
| DRM_DEBUG_DRIVER("%s: page=%d pfCurrentPage=%d\n", |
| __func__, |
| dev_priv->dri1.current_page, |
| master_priv->sarea_priv->pf_current_page); |
| |
| i915_kernel_lost_context(dev); |
| |
| ret = BEGIN_LP_RING(10); |
| if (ret) |
| return ret; |
| |
| OUT_RING(MI_FLUSH | MI_READ_FLUSH); |
| OUT_RING(0); |
| |
| OUT_RING(CMD_OP_DISPLAYBUFFER_INFO | ASYNC_FLIP); |
| OUT_RING(0); |
| if (dev_priv->dri1.current_page == 0) { |
| OUT_RING(dev_priv->dri1.back_offset); |
| dev_priv->dri1.current_page = 1; |
| } else { |
| OUT_RING(dev_priv->dri1.front_offset); |
| dev_priv->dri1.current_page = 0; |
| } |
| OUT_RING(0); |
| |
| OUT_RING(MI_WAIT_FOR_EVENT | MI_WAIT_FOR_PLANE_A_FLIP); |
| OUT_RING(0); |
| |
| ADVANCE_LP_RING(); |
| |
| master_priv->sarea_priv->last_enqueue = dev_priv->dri1.counter++; |
| |
| if (BEGIN_LP_RING(4) == 0) { |
| OUT_RING(MI_STORE_DWORD_INDEX); |
| OUT_RING(I915_BREADCRUMB_INDEX << MI_STORE_DWORD_INDEX_SHIFT); |
| OUT_RING(dev_priv->dri1.counter); |
| OUT_RING(0); |
| ADVANCE_LP_RING(); |
| } |
| |
| master_priv->sarea_priv->pf_current_page = dev_priv->dri1.current_page; |
| return 0; |
| } |
| |
| static int i915_quiescent(struct drm_device *dev) |
| { |
| i915_kernel_lost_context(dev); |
| return intel_ring_idle(LP_RING(dev->dev_private)); |
| } |
| |
| static int i915_flush_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| int ret; |
| |
| if (drm_core_check_feature(dev, DRIVER_MODESET)) |
| return -ENODEV; |
| |
| RING_LOCK_TEST_WITH_RETURN(dev, file_priv); |
| |
| mutex_lock(&dev->struct_mutex); |
| ret = i915_quiescent(dev); |
| mutex_unlock(&dev->struct_mutex); |
| |
| return ret; |
| } |
| |
| static int i915_batchbuffer(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_i915_master_private *master_priv; |
| drm_i915_sarea_t *sarea_priv; |
| drm_i915_batchbuffer_t *batch = data; |
| int ret; |
| struct drm_clip_rect *cliprects = NULL; |
| |
| if (drm_core_check_feature(dev, DRIVER_MODESET)) |
| return -ENODEV; |
| |
| master_priv = dev->primary->master->driver_priv; |
| sarea_priv = (drm_i915_sarea_t *) master_priv->sarea_priv; |
| |
| if (!dev_priv->dri1.allow_batchbuffer) { |
| DRM_ERROR("Batchbuffer ioctl disabled\n"); |
| return -EINVAL; |
| } |
| |
| DRM_DEBUG_DRIVER("i915 batchbuffer, start %x used %d cliprects %d\n", |
| batch->start, batch->used, batch->num_cliprects); |
| |
| RING_LOCK_TEST_WITH_RETURN(dev, file_priv); |
| |
| if (batch->num_cliprects < 0) |
| return -EINVAL; |
| |
| if (batch->num_cliprects) { |
| cliprects = kcalloc(batch->num_cliprects, |
| sizeof(*cliprects), |
| GFP_KERNEL); |
| if (cliprects == NULL) |
| return -ENOMEM; |
| |
| ret = copy_from_user(cliprects, batch->cliprects, |
| batch->num_cliprects * |
| sizeof(struct drm_clip_rect)); |
| if (ret != 0) { |
| ret = -EFAULT; |
| goto fail_free; |
| } |
| } |
| |
| mutex_lock(&dev->struct_mutex); |
| ret = i915_dispatch_batchbuffer(dev, batch, cliprects); |
| mutex_unlock(&dev->struct_mutex); |
| |
| if (sarea_priv) |
| sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv); |
| |
| fail_free: |
| kfree(cliprects); |
| |
| return ret; |
| } |
| |
| static int i915_cmdbuffer(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_i915_master_private *master_priv; |
| drm_i915_sarea_t *sarea_priv; |
| drm_i915_cmdbuffer_t *cmdbuf = data; |
| struct drm_clip_rect *cliprects = NULL; |
| void *batch_data; |
| int ret; |
| |
| DRM_DEBUG_DRIVER("i915 cmdbuffer, buf %p sz %d cliprects %d\n", |
| cmdbuf->buf, cmdbuf->sz, cmdbuf->num_cliprects); |
| |
| if (drm_core_check_feature(dev, DRIVER_MODESET)) |
| return -ENODEV; |
| |
| master_priv = dev->primary->master->driver_priv; |
| sarea_priv = (drm_i915_sarea_t *) master_priv->sarea_priv; |
| |
| RING_LOCK_TEST_WITH_RETURN(dev, file_priv); |
| |
| if (cmdbuf->num_cliprects < 0) |
| return -EINVAL; |
| |
| batch_data = kmalloc(cmdbuf->sz, GFP_KERNEL); |
| if (batch_data == NULL) |
| return -ENOMEM; |
| |
| ret = copy_from_user(batch_data, cmdbuf->buf, cmdbuf->sz); |
| if (ret != 0) { |
| ret = -EFAULT; |
| goto fail_batch_free; |
| } |
| |
| if (cmdbuf->num_cliprects) { |
| cliprects = kcalloc(cmdbuf->num_cliprects, |
| sizeof(*cliprects), GFP_KERNEL); |
| if (cliprects == NULL) { |
| ret = -ENOMEM; |
| goto fail_batch_free; |
| } |
| |
| ret = copy_from_user(cliprects, cmdbuf->cliprects, |
| cmdbuf->num_cliprects * |
| sizeof(struct drm_clip_rect)); |
| if (ret != 0) { |
| ret = -EFAULT; |
| goto fail_clip_free; |
| } |
| } |
| |
| mutex_lock(&dev->struct_mutex); |
| ret = i915_dispatch_cmdbuffer(dev, cmdbuf, cliprects, batch_data); |
| mutex_unlock(&dev->struct_mutex); |
| if (ret) { |
| DRM_ERROR("i915_dispatch_cmdbuffer failed\n"); |
| goto fail_clip_free; |
| } |
| |
| if (sarea_priv) |
| sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv); |
| |
| fail_clip_free: |
| kfree(cliprects); |
| fail_batch_free: |
| kfree(batch_data); |
| |
| return ret; |
| } |
| |
| static int i915_emit_irq(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv; |
| |
| i915_kernel_lost_context(dev); |
| |
| DRM_DEBUG_DRIVER("\n"); |
| |
| dev_priv->dri1.counter++; |
| if (dev_priv->dri1.counter > 0x7FFFFFFFUL) |
| dev_priv->dri1.counter = 1; |
| if (master_priv->sarea_priv) |
| master_priv->sarea_priv->last_enqueue = dev_priv->dri1.counter; |
| |
| if (BEGIN_LP_RING(4) == 0) { |
| OUT_RING(MI_STORE_DWORD_INDEX); |
| OUT_RING(I915_BREADCRUMB_INDEX << MI_STORE_DWORD_INDEX_SHIFT); |
| OUT_RING(dev_priv->dri1.counter); |
| OUT_RING(MI_USER_INTERRUPT); |
| ADVANCE_LP_RING(); |
| } |
| |
| return dev_priv->dri1.counter; |
| } |
| |
| static int i915_wait_irq(struct drm_device *dev, int irq_nr) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv; |
| int ret = 0; |
| struct intel_engine_cs *ring = LP_RING(dev_priv); |
| |
| DRM_DEBUG_DRIVER("irq_nr=%d breadcrumb=%d\n", irq_nr, |
| READ_BREADCRUMB(dev_priv)); |
| |
| if (READ_BREADCRUMB(dev_priv) >= irq_nr) { |
| if (master_priv->sarea_priv) |
| master_priv->sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv); |
| return 0; |
| } |
| |
| if (master_priv->sarea_priv) |
| master_priv->sarea_priv->perf_boxes |= I915_BOX_WAIT; |
| |
| if (ring->irq_get(ring)) { |
| DRM_WAIT_ON(ret, ring->irq_queue, 3 * HZ, |
| READ_BREADCRUMB(dev_priv) >= irq_nr); |
| ring->irq_put(ring); |
| } else if (wait_for(READ_BREADCRUMB(dev_priv) >= irq_nr, 3000)) |
| ret = -EBUSY; |
| |
| if (ret == -EBUSY) { |
| DRM_ERROR("EBUSY -- rec: %d emitted: %d\n", |
| READ_BREADCRUMB(dev_priv), (int)dev_priv->dri1.counter); |
| } |
| |
| return ret; |
| } |
| |
| /* Needs the lock as it touches the ring. |
| */ |
| static int i915_irq_emit(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| drm_i915_irq_emit_t *emit = data; |
| int result; |
| |
| if (drm_core_check_feature(dev, DRIVER_MODESET)) |
| return -ENODEV; |
| |
| if (!dev_priv || !LP_RING(dev_priv)->buffer->virtual_start) { |
| DRM_ERROR("called with no initialization\n"); |
| return -EINVAL; |
| } |
| |
| RING_LOCK_TEST_WITH_RETURN(dev, file_priv); |
| |
| mutex_lock(&dev->struct_mutex); |
| result = i915_emit_irq(dev); |
| mutex_unlock(&dev->struct_mutex); |
| |
| if (copy_to_user(emit->irq_seq, &result, sizeof(int))) { |
| DRM_ERROR("copy_to_user\n"); |
| return -EFAULT; |
| } |
| |
| return 0; |
| } |
| |
| /* Doesn't need the hardware lock. |
| */ |
| static int i915_irq_wait(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| drm_i915_irq_wait_t *irqwait = data; |
| |
| if (drm_core_check_feature(dev, DRIVER_MODESET)) |
| return -ENODEV; |
| |
| if (!dev_priv) { |
| DRM_ERROR("called with no initialization\n"); |
| return -EINVAL; |
| } |
| |
| return i915_wait_irq(dev, irqwait->irq_seq); |
| } |
| |
| static int i915_vblank_pipe_get(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| drm_i915_vblank_pipe_t *pipe = data; |
| |
| if (drm_core_check_feature(dev, DRIVER_MODESET)) |
| return -ENODEV; |
| |
| if (!dev_priv) { |
| DRM_ERROR("called with no initialization\n"); |
| return -EINVAL; |
| } |
| |
| pipe->pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B; |
| |
| return 0; |
| } |
| |
| /** |
| * Schedule buffer swap at given vertical blank. |
| */ |
| static int i915_vblank_swap(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| /* The delayed swap mechanism was fundamentally racy, and has been |
| * removed. The model was that the client requested a delayed flip/swap |
| * from the kernel, then waited for vblank before continuing to perform |
| * rendering. The problem was that the kernel might wake the client |
| * up before it dispatched the vblank swap (since the lock has to be |
| * held while touching the ringbuffer), in which case the client would |
| * clear and start the next frame before the swap occurred, and |
| * flicker would occur in addition to likely missing the vblank. |
| * |
| * In the absence of this ioctl, userland falls back to a correct path |
| * of waiting for a vblank, then dispatching the swap on its own. |
| * Context switching to userland and back is plenty fast enough for |
| * meeting the requirements of vblank swapping. |
| */ |
| return -EINVAL; |
| } |
| |
| static int i915_flip_bufs(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| int ret; |
| |
| if (drm_core_check_feature(dev, DRIVER_MODESET)) |
| return -ENODEV; |
| |
| DRM_DEBUG_DRIVER("%s\n", __func__); |
| |
| RING_LOCK_TEST_WITH_RETURN(dev, file_priv); |
| |
| mutex_lock(&dev->struct_mutex); |
| ret = i915_dispatch_flip(dev); |
| mutex_unlock(&dev->struct_mutex); |
| |
| return ret; |
| } |
| |
| static int i915_getparam(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| drm_i915_getparam_t *param = data; |
| int value; |
| |
| if (!dev_priv) { |
| DRM_ERROR("called with no initialization\n"); |
| return -EINVAL; |
| } |
| |
| switch (param->param) { |
| case I915_PARAM_IRQ_ACTIVE: |
| value = dev->pdev->irq ? 1 : 0; |
| break; |
| case I915_PARAM_ALLOW_BATCHBUFFER: |
| value = dev_priv->dri1.allow_batchbuffer ? 1 : 0; |
| break; |
| case I915_PARAM_LAST_DISPATCH: |
| value = READ_BREADCRUMB(dev_priv); |
| break; |
| case I915_PARAM_CHIPSET_ID: |
| value = dev->pdev->device; |
| break; |
| case I915_PARAM_HAS_GEM: |
| value = 1; |
| break; |
| case I915_PARAM_NUM_FENCES_AVAIL: |
| value = dev_priv->num_fence_regs - dev_priv->fence_reg_start; |
| break; |
| case I915_PARAM_HAS_OVERLAY: |
| value = dev_priv->overlay ? 1 : 0; |
| break; |
| case I915_PARAM_HAS_PAGEFLIPPING: |
| value = 1; |
| break; |
| case I915_PARAM_HAS_EXECBUF2: |
| /* depends on GEM */ |
| value = 1; |
| break; |
| case I915_PARAM_HAS_BSD: |
| value = intel_ring_initialized(&dev_priv->ring[VCS]); |
| break; |
| case I915_PARAM_HAS_BLT: |
| value = intel_ring_initialized(&dev_priv->ring[BCS]); |
| break; |
| case I915_PARAM_HAS_VEBOX: |
| value = intel_ring_initialized(&dev_priv->ring[VECS]); |
| break; |
| case I915_PARAM_HAS_RELAXED_FENCING: |
| value = 1; |
| break; |
| case I915_PARAM_HAS_COHERENT_RINGS: |
| value = 1; |
| break; |
| case I915_PARAM_HAS_EXEC_CONSTANTS: |
| value = INTEL_INFO(dev)->gen >= 4; |
| break; |
| case I915_PARAM_HAS_RELAXED_DELTA: |
| value = 1; |
| break; |
| case I915_PARAM_HAS_GEN7_SOL_RESET: |
| value = 1; |
| break; |
| case I915_PARAM_HAS_LLC: |
| value = HAS_LLC(dev); |
| break; |
| case I915_PARAM_HAS_WT: |
| value = HAS_WT(dev); |
| break; |
| case I915_PARAM_HAS_ALIASING_PPGTT: |
| value = dev_priv->mm.aliasing_ppgtt || USES_FULL_PPGTT(dev); |
| break; |
| case I915_PARAM_HAS_WAIT_TIMEOUT: |
| value = 1; |
| break; |
| case I915_PARAM_HAS_SEMAPHORES: |
| value = i915_semaphore_is_enabled(dev); |
| break; |
| case I915_PARAM_HAS_PRIME_VMAP_FLUSH: |
| value = 1; |
| break; |
| case I915_PARAM_HAS_SECURE_BATCHES: |
| value = capable(CAP_SYS_ADMIN); |
| break; |
| case I915_PARAM_HAS_PINNED_BATCHES: |
| value = 1; |
| break; |
| case I915_PARAM_HAS_EXEC_NO_RELOC: |
| value = 1; |
| break; |
| case I915_PARAM_HAS_EXEC_HANDLE_LUT: |
| value = 1; |
| break; |
| case I915_PARAM_CMD_PARSER_VERSION: |
| value = i915_cmd_parser_get_version(); |
| break; |
| default: |
| DRM_DEBUG("Unknown parameter %d\n", param->param); |
| return -EINVAL; |
| } |
| |
| if (copy_to_user(param->value, &value, sizeof(int))) { |
| DRM_ERROR("copy_to_user failed\n"); |
| return -EFAULT; |
| } |
| |
| return 0; |
| } |
| |
| static int i915_setparam(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| drm_i915_setparam_t *param = data; |
| |
| if (!dev_priv) { |
| DRM_ERROR("called with no initialization\n"); |
| return -EINVAL; |
| } |
| |
| switch (param->param) { |
| case I915_SETPARAM_USE_MI_BATCHBUFFER_START: |
| break; |
| case I915_SETPARAM_TEX_LRU_LOG_GRANULARITY: |
| break; |
| case I915_SETPARAM_ALLOW_BATCHBUFFER: |
| dev_priv->dri1.allow_batchbuffer = param->value ? 1 : 0; |
| break; |
| case I915_SETPARAM_NUM_USED_FENCES: |
| if (param->value > dev_priv->num_fence_regs || |
| param->value < 0) |
| return -EINVAL; |
| /* Userspace can use first N regs */ |
| dev_priv->fence_reg_start = param->value; |
| break; |
| default: |
| DRM_DEBUG_DRIVER("unknown parameter %d\n", |
| param->param); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int i915_set_status_page(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| drm_i915_hws_addr_t *hws = data; |
| struct intel_engine_cs *ring; |
| |
| if (drm_core_check_feature(dev, DRIVER_MODESET)) |
| return -ENODEV; |
| |
| if (!I915_NEED_GFX_HWS(dev)) |
| return -EINVAL; |
| |
| if (!dev_priv) { |
| DRM_ERROR("called with no initialization\n"); |
| return -EINVAL; |
| } |
| |
| if (drm_core_check_feature(dev, DRIVER_MODESET)) { |
| WARN(1, "tried to set status page when mode setting active\n"); |
| return 0; |
| } |
| |
| DRM_DEBUG_DRIVER("set status page addr 0x%08x\n", (u32)hws->addr); |
| |
| ring = LP_RING(dev_priv); |
| ring->status_page.gfx_addr = hws->addr & (0x1ffff<<12); |
| |
| dev_priv->dri1.gfx_hws_cpu_addr = |
| ioremap_wc(dev_priv->gtt.mappable_base + hws->addr, 4096); |
| if (dev_priv->dri1.gfx_hws_cpu_addr == NULL) { |
| i915_dma_cleanup(dev); |
| ring->status_page.gfx_addr = 0; |
| DRM_ERROR("can not ioremap virtual address for" |
| " G33 hw status page\n"); |
| return -ENOMEM; |
| } |
| |
| memset_io(dev_priv->dri1.gfx_hws_cpu_addr, 0, PAGE_SIZE); |
| I915_WRITE(HWS_PGA, ring->status_page.gfx_addr); |
| |
| DRM_DEBUG_DRIVER("load hws HWS_PGA with gfx mem 0x%x\n", |
| ring->status_page.gfx_addr); |
| DRM_DEBUG_DRIVER("load hws at %p\n", |
| ring->status_page.page_addr); |
| return 0; |
| } |
| |
| static int i915_get_bridge_dev(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| dev_priv->bridge_dev = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0)); |
| if (!dev_priv->bridge_dev) { |
| DRM_ERROR("bridge device not found\n"); |
| return -1; |
| } |
| return 0; |
| } |
| |
| #define MCHBAR_I915 0x44 |
| #define MCHBAR_I965 0x48 |
| #define MCHBAR_SIZE (4*4096) |
| |
| #define DEVEN_REG 0x54 |
| #define DEVEN_MCHBAR_EN (1 << 28) |
| |
| /* Allocate space for the MCH regs if needed, return nonzero on error */ |
| static int |
| intel_alloc_mchbar_resource(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int reg = INTEL_INFO(dev)->gen >= 4 ? MCHBAR_I965 : MCHBAR_I915; |
| u32 temp_lo, temp_hi = 0; |
| u64 mchbar_addr; |
| int ret; |
| |
| if (INTEL_INFO(dev)->gen >= 4) |
| pci_read_config_dword(dev_priv->bridge_dev, reg + 4, &temp_hi); |
| pci_read_config_dword(dev_priv->bridge_dev, reg, &temp_lo); |
| mchbar_addr = ((u64)temp_hi << 32) | temp_lo; |
| |
| /* If ACPI doesn't have it, assume we need to allocate it ourselves */ |
| #ifdef CONFIG_PNP |
| if (mchbar_addr && |
| pnp_range_reserved(mchbar_addr, mchbar_addr + MCHBAR_SIZE)) |
| return 0; |
| #endif |
| |
| /* Get some space for it */ |
| dev_priv->mch_res.name = "i915 MCHBAR"; |
| dev_priv->mch_res.flags = IORESOURCE_MEM; |
| ret = pci_bus_alloc_resource(dev_priv->bridge_dev->bus, |
| &dev_priv->mch_res, |
| MCHBAR_SIZE, MCHBAR_SIZE, |
| PCIBIOS_MIN_MEM, |
| 0, pcibios_align_resource, |
| dev_priv->bridge_dev); |
| if (ret) { |
| DRM_DEBUG_DRIVER("failed bus alloc: %d\n", ret); |
| dev_priv->mch_res.start = 0; |
| return ret; |
| } |
| |
| if (INTEL_INFO(dev)->gen >= 4) |
| pci_write_config_dword(dev_priv->bridge_dev, reg + 4, |
| upper_32_bits(dev_priv->mch_res.start)); |
| |
| pci_write_config_dword(dev_priv->bridge_dev, reg, |
| lower_32_bits(dev_priv->mch_res.start)); |
| return 0; |
| } |
| |
| /* Setup MCHBAR if possible, return true if we should disable it again */ |
| static void |
| intel_setup_mchbar(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int mchbar_reg = INTEL_INFO(dev)->gen >= 4 ? MCHBAR_I965 : MCHBAR_I915; |
| u32 temp; |
| bool enabled; |
| |
| if (IS_VALLEYVIEW(dev)) |
| return; |
| |
| dev_priv->mchbar_need_disable = false; |
| |
| if (IS_I915G(dev) || IS_I915GM(dev)) { |
| pci_read_config_dword(dev_priv->bridge_dev, DEVEN_REG, &temp); |
| enabled = !!(temp & DEVEN_MCHBAR_EN); |
| } else { |
| pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp); |
| enabled = temp & 1; |
| } |
| |
| /* If it's already enabled, don't have to do anything */ |
| if (enabled) |
| return; |
| |
| if (intel_alloc_mchbar_resource(dev)) |
| return; |
| |
| dev_priv->mchbar_need_disable = true; |
| |
| /* Space is allocated or reserved, so enable it. */ |
| if (IS_I915G(dev) || IS_I915GM(dev)) { |
| pci_write_config_dword(dev_priv->bridge_dev, DEVEN_REG, |
| temp | DEVEN_MCHBAR_EN); |
| } else { |
| pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp); |
| pci_write_config_dword(dev_priv->bridge_dev, mchbar_reg, temp | 1); |
| } |
| } |
| |
| static void |
| intel_teardown_mchbar(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int mchbar_reg = INTEL_INFO(dev)->gen >= 4 ? MCHBAR_I965 : MCHBAR_I915; |
| u32 temp; |
| |
| if (dev_priv->mchbar_need_disable) { |
| if (IS_I915G(dev) || IS_I915GM(dev)) { |
| pci_read_config_dword(dev_priv->bridge_dev, DEVEN_REG, &temp); |
| temp &= ~DEVEN_MCHBAR_EN; |
| pci_write_config_dword(dev_priv->bridge_dev, DEVEN_REG, temp); |
| } else { |
| pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp); |
| temp &= ~1; |
| pci_write_config_dword(dev_priv->bridge_dev, mchbar_reg, temp); |
| } |
| } |
| |
| if (dev_priv->mch_res.start) |
| release_resource(&dev_priv->mch_res); |
| } |
| |
| /* true = enable decode, false = disable decoder */ |
| static unsigned int i915_vga_set_decode(void *cookie, bool state) |
| { |
| struct drm_device *dev = cookie; |
| |
| intel_modeset_vga_set_state(dev, state); |
| if (state) |
| return VGA_RSRC_LEGACY_IO | VGA_RSRC_LEGACY_MEM | |
| VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM; |
| else |
| return VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM; |
| } |
| |
| static void i915_switcheroo_set_state(struct pci_dev *pdev, enum vga_switcheroo_state state) |
| { |
| struct drm_device *dev = pci_get_drvdata(pdev); |
| pm_message_t pmm = { .event = PM_EVENT_SUSPEND }; |
| |
| if (state == VGA_SWITCHEROO_ON) { |
| pr_info("switched on\n"); |
| dev->switch_power_state = DRM_SWITCH_POWER_CHANGING; |
| /* i915 resume handler doesn't set to D0 */ |
| pci_set_power_state(dev->pdev, PCI_D0); |
| i915_resume(dev); |
| dev->switch_power_state = DRM_SWITCH_POWER_ON; |
| } else { |
| pr_err("switched off\n"); |
| dev->switch_power_state = DRM_SWITCH_POWER_CHANGING; |
| i915_suspend(dev, pmm); |
| dev->switch_power_state = DRM_SWITCH_POWER_OFF; |
| } |
| } |
| |
| static bool i915_switcheroo_can_switch(struct pci_dev *pdev) |
| { |
| struct drm_device *dev = pci_get_drvdata(pdev); |
| |
| /* |
| * FIXME: open_count is protected by drm_global_mutex but that would lead to |
| * locking inversion with the driver load path. And the access here is |
| * completely racy anyway. So don't bother with locking for now. |
| */ |
| return dev->open_count == 0; |
| } |
| |
| static const struct vga_switcheroo_client_ops i915_switcheroo_ops = { |
| .set_gpu_state = i915_switcheroo_set_state, |
| .reprobe = NULL, |
| .can_switch = i915_switcheroo_can_switch, |
| }; |
| |
| static int i915_load_modeset_init(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int ret; |
| |
| ret = intel_parse_bios(dev); |
| if (ret) |
| DRM_INFO("failed to find VBIOS tables\n"); |
| |
| /* If we have > 1 VGA cards, then we need to arbitrate access |
| * to the common VGA resources. |
| * |
| * If we are a secondary display controller (!PCI_DISPLAY_CLASS_VGA), |
| * then we do not take part in VGA arbitration and the |
| * vga_client_register() fails with -ENODEV. |
| */ |
| ret = vga_client_register(dev->pdev, dev, NULL, i915_vga_set_decode); |
| if (ret && ret != -ENODEV) |
| goto out; |
| |
| intel_register_dsm_handler(); |
| |
| ret = vga_switcheroo_register_client(dev->pdev, &i915_switcheroo_ops, false); |
| if (ret) |
| goto cleanup_vga_client; |
| |
| /* Initialise stolen first so that we may reserve preallocated |
| * objects for the BIOS to KMS transition. |
| */ |
| ret = i915_gem_init_stolen(dev); |
| if (ret) |
| goto cleanup_vga_switcheroo; |
| |
| intel_power_domains_init_hw(dev_priv); |
| |
| /* |
| * We enable some interrupt sources in our postinstall hooks, so mark |
| * interrupts as enabled _before_ actually enabling them to avoid |
| * special cases in our ordering checks. |
| */ |
| dev_priv->pm._irqs_disabled = false; |
| |
| ret = drm_irq_install(dev, dev->pdev->irq); |
| if (ret) |
| goto cleanup_gem_stolen; |
| |
| /* Important: The output setup functions called by modeset_init need |
| * working irqs for e.g. gmbus and dp aux transfers. */ |
| intel_modeset_init(dev); |
| |
| ret = i915_gem_init(dev); |
| if (ret) |
| goto cleanup_irq; |
| |
| INIT_WORK(&dev_priv->console_resume_work, intel_console_resume); |
| |
| intel_modeset_gem_init(dev); |
| |
| /* Always safe in the mode setting case. */ |
| /* FIXME: do pre/post-mode set stuff in core KMS code */ |
| dev->vblank_disable_allowed = true; |
| if (INTEL_INFO(dev)->num_pipes == 0) |
| return 0; |
| |
| ret = intel_fbdev_init(dev); |
| if (ret) |
| goto cleanup_gem; |
| |
| /* Only enable hotplug handling once the fbdev is fully set up. */ |
| intel_hpd_init(dev); |
| |
| /* |
| * Some ports require correctly set-up hpd registers for detection to |
| * work properly (leading to ghost connected connector status), e.g. VGA |
| * on gm45. Hence we can only set up the initial fbdev config after hpd |
| * irqs are fully enabled. Now we should scan for the initial config |
| * only once hotplug handling is enabled, but due to screwed-up locking |
| * around kms/fbdev init we can't protect the fdbev initial config |
| * scanning against hotplug events. Hence do this first and ignore the |
| * tiny window where we will loose hotplug notifactions. |
| */ |
| intel_fbdev_initial_config(dev); |
| |
| drm_kms_helper_poll_init(dev); |
| |
| return 0; |
| |
| cleanup_gem: |
| mutex_lock(&dev->struct_mutex); |
| i915_gem_cleanup_ringbuffer(dev); |
| i915_gem_context_fini(dev); |
| mutex_unlock(&dev->struct_mutex); |
| WARN_ON(dev_priv->mm.aliasing_ppgtt); |
| cleanup_irq: |
| drm_irq_uninstall(dev); |
| cleanup_gem_stolen: |
| i915_gem_cleanup_stolen(dev); |
| cleanup_vga_switcheroo: |
| vga_switcheroo_unregister_client(dev->pdev); |
| cleanup_vga_client: |
| vga_client_register(dev->pdev, NULL, NULL, NULL); |
| out: |
| return ret; |
| } |
| |
| int i915_master_create(struct drm_device *dev, struct drm_master *master) |
| { |
| struct drm_i915_master_private *master_priv; |
| |
| master_priv = kzalloc(sizeof(*master_priv), GFP_KERNEL); |
| if (!master_priv) |
| return -ENOMEM; |
| |
| master->driver_priv = master_priv; |
| return 0; |
| } |
| |
| void i915_master_destroy(struct drm_device *dev, struct drm_master *master) |
| { |
| struct drm_i915_master_private *master_priv = master->driver_priv; |
| |
| if (!master_priv) |
| return; |
| |
| kfree(master_priv); |
| |
| master->driver_priv = NULL; |
| } |
| |
| #if IS_ENABLED(CONFIG_FB) |
| static int i915_kick_out_firmware_fb(struct drm_i915_private *dev_priv) |
| { |
| struct apertures_struct *ap; |
| struct pci_dev *pdev = dev_priv->dev->pdev; |
| bool primary; |
| int ret; |
| |
| ap = alloc_apertures(1); |
| if (!ap) |
| return -ENOMEM; |
| |
| ap->ranges[0].base = dev_priv->gtt.mappable_base; |
| ap->ranges[0].size = dev_priv->gtt.mappable_end; |
| |
| primary = |
| pdev->resource[PCI_ROM_RESOURCE].flags & IORESOURCE_ROM_SHADOW; |
| |
| ret = remove_conflicting_framebuffers(ap, "inteldrmfb", primary); |
| |
| kfree(ap); |
| |
| return ret; |
| } |
| #else |
| static int i915_kick_out_firmware_fb(struct drm_i915_private *dev_priv) |
| { |
| return 0; |
| } |
| #endif |
| |
| #if !defined(CONFIG_VGA_CONSOLE) |
| static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv) |
| { |
| return 0; |
| } |
| #elif !defined(CONFIG_DUMMY_CONSOLE) |
| static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv) |
| { |
| return -ENODEV; |
| } |
| #else |
| static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv) |
| { |
| int ret = 0; |
| |
| DRM_INFO("Replacing VGA console driver\n"); |
| |
| console_lock(); |
| if (con_is_bound(&vga_con)) |
| ret = do_take_over_console(&dummy_con, 0, MAX_NR_CONSOLES - 1, 1); |
| if (ret == 0) { |
| ret = do_unregister_con_driver(&vga_con); |
| |
| /* Ignore "already unregistered". */ |
| if (ret == -ENODEV) |
| ret = 0; |
| } |
| console_unlock(); |
| |
| return ret; |
| } |
| #endif |
| |
| static void i915_dump_device_info(struct drm_i915_private *dev_priv) |
| { |
| const struct intel_device_info *info = &dev_priv->info; |
| |
| #define PRINT_S(name) "%s" |
| #define SEP_EMPTY |
| #define PRINT_FLAG(name) info->name ? #name "," : "" |
| #define SEP_COMMA , |
| DRM_DEBUG_DRIVER("i915 device info: gen=%i, pciid=0x%04x rev=0x%02x flags=" |
| DEV_INFO_FOR_EACH_FLAG(PRINT_S, SEP_EMPTY), |
| info->gen, |
| dev_priv->dev->pdev->device, |
| dev_priv->dev->pdev->revision, |
| DEV_INFO_FOR_EACH_FLAG(PRINT_FLAG, SEP_COMMA)); |
| #undef PRINT_S |
| #undef SEP_EMPTY |
| #undef PRINT_FLAG |
| #undef SEP_COMMA |
| } |
| |
| /* |
| * Determine various intel_device_info fields at runtime. |
| * |
| * Use it when either: |
| * - it's judged too laborious to fill n static structures with the limit |
| * when a simple if statement does the job, |
| * - run-time checks (eg read fuse/strap registers) are needed. |
| * |
| * This function needs to be called: |
| * - after the MMIO has been setup as we are reading registers, |
| * - after the PCH has been detected, |
| * - before the first usage of the fields it can tweak. |
| */ |
| static void intel_device_info_runtime_init(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_device_info *info; |
| enum pipe pipe; |
| |
| info = (struct intel_device_info *)&dev_priv->info; |
| |
| if (IS_VALLEYVIEW(dev)) |
| for_each_pipe(pipe) |
| info->num_sprites[pipe] = 2; |
| else |
| for_each_pipe(pipe) |
| info->num_sprites[pipe] = 1; |
| |
| if (i915.disable_display) { |
| DRM_INFO("Display disabled (module parameter)\n"); |
| info->num_pipes = 0; |
| } else if (info->num_pipes > 0 && |
| (INTEL_INFO(dev)->gen == 7 || INTEL_INFO(dev)->gen == 8) && |
| !IS_VALLEYVIEW(dev)) { |
| u32 fuse_strap = I915_READ(FUSE_STRAP); |
| u32 sfuse_strap = I915_READ(SFUSE_STRAP); |
| |
| /* |
| * SFUSE_STRAP is supposed to have a bit signalling the display |
| * is fused off. Unfortunately it seems that, at least in |
| * certain cases, fused off display means that PCH display |
| * reads don't land anywhere. In that case, we read 0s. |
| * |
| * On CPT/PPT, we can detect this case as SFUSE_STRAP_FUSE_LOCK |
| * should be set when taking over after the firmware. |
| */ |
| if (fuse_strap & ILK_INTERNAL_DISPLAY_DISABLE || |
| sfuse_strap & SFUSE_STRAP_DISPLAY_DISABLED || |
| (dev_priv->pch_type == PCH_CPT && |
| !(sfuse_strap & SFUSE_STRAP_FUSE_LOCK))) { |
| DRM_INFO("Display fused off, disabling\n"); |
| info->num_pipes = 0; |
| } |
| } |
| } |
| |
| /** |
| * i915_driver_load - setup chip and create an initial config |
| * @dev: DRM device |
| * @flags: startup flags |
| * |
| * The driver load routine has to do several things: |
| * - drive output discovery via intel_modeset_init() |
| * - initialize the memory manager |
| * - allocate initial config memory |
| * - setup the DRM framebuffer with the allocated memory |
| */ |
| int i915_driver_load(struct drm_device *dev, unsigned long flags) |
| { |
| struct drm_i915_private *dev_priv; |
| struct intel_device_info *info, *device_info; |
| int ret = 0, mmio_bar, mmio_size; |
| uint32_t aperture_size; |
| |
| info = (struct intel_device_info *) flags; |
| |
| /* Refuse to load on gen6+ without kms enabled. */ |
| if (info->gen >= 6 && !drm_core_check_feature(dev, DRIVER_MODESET)) { |
| DRM_INFO("Your hardware requires kernel modesetting (KMS)\n"); |
| DRM_INFO("See CONFIG_DRM_I915_KMS, nomodeset, and i915.modeset parameters\n"); |
| return -ENODEV; |
| } |
| |
| /* UMS needs agp support. */ |
| if (!drm_core_check_feature(dev, DRIVER_MODESET) && !dev->agp) |
| return -EINVAL; |
| |
| dev_priv = kzalloc(sizeof(*dev_priv), GFP_KERNEL); |
| if (dev_priv == NULL) |
| return -ENOMEM; |
| |
| dev->dev_private = dev_priv; |
| dev_priv->dev = dev; |
| |
| /* copy initial configuration to dev_priv->info */ |
| device_info = (struct intel_device_info *)&dev_priv->info; |
| *device_info = *info; |
| |
| spin_lock_init(&dev_priv->irq_lock); |
| spin_lock_init(&dev_priv->gpu_error.lock); |
| spin_lock_init(&dev_priv->backlight_lock); |
| spin_lock_init(&dev_priv->uncore.lock); |
| spin_lock_init(&dev_priv->mm.object_stat_lock); |
| spin_lock_init(&dev_priv->mmio_flip_lock); |
| mutex_init(&dev_priv->dpio_lock); |
| mutex_init(&dev_priv->modeset_restore_lock); |
| |
| intel_pm_setup(dev); |
| |
| intel_display_crc_init(dev); |
| |
| i915_dump_device_info(dev_priv); |
| |
| /* Not all pre-production machines fall into this category, only the |
| * very first ones. Almost everything should work, except for maybe |
| * suspend/resume. And we don't implement workarounds that affect only |
| * pre-production machines. */ |
| if (IS_HSW_EARLY_SDV(dev)) |
| DRM_INFO("This is an early pre-production Haswell machine. " |
| "It may not be fully functional.\n"); |
| |
| if (i915_get_bridge_dev(dev)) { |
| ret = -EIO; |
| goto free_priv; |
| } |
| |
| mmio_bar = IS_GEN2(dev) ? 1 : 0; |
| /* Before gen4, the registers and the GTT are behind different BARs. |
| * However, from gen4 onwards, the registers and the GTT are shared |
| * in the same BAR, so we want to restrict this ioremap from |
| * clobbering the GTT which we want ioremap_wc instead. Fortunately, |
| * the register BAR remains the same size for all the earlier |
| * generations up to Ironlake. |
| */ |
| if (info->gen < 5) |
| mmio_size = 512*1024; |
| else |
| mmio_size = 2*1024*1024; |
| |
| dev_priv->regs = pci_iomap(dev->pdev, mmio_bar, mmio_size); |
| if (!dev_priv->regs) { |
| DRM_ERROR("failed to map registers\n"); |
| ret = -EIO; |
| goto put_bridge; |
| } |
| |
| /* This must be called before any calls to HAS_PCH_* */ |
| intel_detect_pch(dev); |
| |
| intel_uncore_init(dev); |
| |
| ret = i915_gem_gtt_init(dev); |
| if (ret) |
| goto out_regs; |
| |
| if (drm_core_check_feature(dev, DRIVER_MODESET)) { |
| ret = i915_kick_out_vgacon(dev_priv); |
| if (ret) { |
| DRM_ERROR("failed to remove conflicting VGA console\n"); |
| goto out_gtt; |
| } |
| |
| ret = i915_kick_out_firmware_fb(dev_priv); |
| if (ret) { |
| DRM_ERROR("failed to remove conflicting framebuffer drivers\n"); |
| goto out_gtt; |
| } |
| } |
| |
| pci_set_master(dev->pdev); |
| |
| /* overlay on gen2 is broken and can't address above 1G */ |
| if (IS_GEN2(dev)) |
| dma_set_coherent_mask(&dev->pdev->dev, DMA_BIT_MASK(30)); |
| |
| /* 965GM sometimes incorrectly writes to hardware status page (HWS) |
| * using 32bit addressing, overwriting memory if HWS is located |
| * above 4GB. |
| * |
| * The documentation also mentions an issue with undefined |
| * behaviour if any general state is accessed within a page above 4GB, |
| * which also needs to be handled carefully. |
| */ |
| if (IS_BROADWATER(dev) || IS_CRESTLINE(dev)) |
| dma_set_coherent_mask(&dev->pdev->dev, DMA_BIT_MASK(32)); |
| |
| aperture_size = dev_priv->gtt.mappable_end; |
| |
| dev_priv->gtt.mappable = |
| io_mapping_create_wc(dev_priv->gtt.mappable_base, |
| aperture_size); |
| if (dev_priv->gtt.mappable == NULL) { |
| ret = -EIO; |
| goto out_gtt; |
| } |
| |
| dev_priv->gtt.mtrr = arch_phys_wc_add(dev_priv->gtt.mappable_base, |
| aperture_size); |
| |
| /* The i915 workqueue is primarily used for batched retirement of |
| * requests (and thus managing bo) once the task has been completed |
| * by the GPU. i915_gem_retire_requests() is called directly when we |
| * need high-priority retirement, such as waiting for an explicit |
| * bo. |
| * |
| * It is also used for periodic low-priority events, such as |
| * idle-timers and recording error state. |
| * |
| * All tasks on the workqueue are expected to acquire the dev mutex |
| * so there is no point in running more than one instance of the |
| * workqueue at any time. Use an ordered one. |
| */ |
| dev_priv->wq = alloc_ordered_workqueue("i915", 0); |
| if (dev_priv->wq == NULL) { |
| DRM_ERROR("Failed to create our workqueue.\n"); |
| ret = -ENOMEM; |
| goto out_mtrrfree; |
| } |
| |
| dev_priv->dp_wq = alloc_ordered_workqueue("i915-dp", 0); |
| if (dev_priv->dp_wq == NULL) { |
| DRM_ERROR("Failed to create our dp workqueue.\n"); |
| ret = -ENOMEM; |
| goto out_freewq; |
| } |
| |
| intel_irq_init(dev); |
| intel_uncore_sanitize(dev); |
| |
| /* Try to make sure MCHBAR is enabled before poking at it */ |
| intel_setup_mchbar(dev); |
| intel_setup_gmbus(dev); |
| intel_opregion_setup(dev); |
| |
| intel_setup_bios(dev); |
| |
| i915_gem_load(dev); |
| |
| /* On the 945G/GM, the chipset reports the MSI capability on the |
| * integrated graphics even though the support isn't actually there |
| * according to the published specs. It doesn't appear to function |
| * correctly in testing on 945G. |
| * This may be a side effect of MSI having been made available for PEG |
| * and the registers being closely associated. |
| * |
| * According to chipset errata, on the 965GM, MSI interrupts may |
| * be lost or delayed, but we use them anyways to avoid |
| * stuck interrupts on some machines. |
| */ |
| if (!IS_I945G(dev) && !IS_I945GM(dev)) |
| pci_enable_msi(dev->pdev); |
| |
| intel_device_info_runtime_init(dev); |
| |
| if (INTEL_INFO(dev)->num_pipes) { |
| ret = drm_vblank_init(dev, INTEL_INFO(dev)->num_pipes); |
| if (ret) |
| goto out_gem_unload; |
| } |
| |
| intel_power_domains_init(dev_priv); |
| |
| if (drm_core_check_feature(dev, DRIVER_MODESET)) { |
| ret = i915_load_modeset_init(dev); |
| if (ret < 0) { |
| DRM_ERROR("failed to init modeset\n"); |
| goto out_power_well; |
| } |
| } else { |
| /* Start out suspended in ums mode. */ |
| dev_priv->ums.mm_suspended = 1; |
| } |
| |
| i915_setup_sysfs(dev); |
| |
| if (INTEL_INFO(dev)->num_pipes) { |
| /* Must be done after probing outputs */ |
| intel_opregion_init(dev); |
| acpi_video_register(); |
| } |
| |
| if (IS_GEN5(dev)) |
| intel_gpu_ips_init(dev_priv); |
| |
| intel_init_runtime_pm(dev_priv); |
| |
| return 0; |
| |
| out_power_well: |
| intel_power_domains_remove(dev_priv); |
| drm_vblank_cleanup(dev); |
| out_gem_unload: |
| WARN_ON(unregister_oom_notifier(&dev_priv->mm.oom_notifier)); |
| unregister_shrinker(&dev_priv->mm.shrinker); |
| |
| if (dev->pdev->msi_enabled) |
| pci_disable_msi(dev->pdev); |
| |
| intel_teardown_gmbus(dev); |
| intel_teardown_mchbar(dev); |
| pm_qos_remove_request(&dev_priv->pm_qos); |
| destroy_workqueue(dev_priv->dp_wq); |
| out_freewq: |
| destroy_workqueue(dev_priv->wq); |
| out_mtrrfree: |
| arch_phys_wc_del(dev_priv->gtt.mtrr); |
| io_mapping_free(dev_priv->gtt.mappable); |
| out_gtt: |
| dev_priv->gtt.base.cleanup(&dev_priv->gtt.base); |
| out_regs: |
| intel_uncore_fini(dev); |
| pci_iounmap(dev->pdev, dev_priv->regs); |
| put_bridge: |
| pci_dev_put(dev_priv->bridge_dev); |
| free_priv: |
| if (dev_priv->slab) |
| kmem_cache_destroy(dev_priv->slab); |
| kfree(dev_priv); |
| return ret; |
| } |
| |
| int i915_driver_unload(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int ret; |
| |
| ret = i915_gem_suspend(dev); |
| if (ret) { |
| DRM_ERROR("failed to idle hardware: %d\n", ret); |
| return ret; |
| } |
| |
| intel_fini_runtime_pm(dev_priv); |
| |
| intel_gpu_ips_teardown(); |
| |
| /* The i915.ko module is still not prepared to be loaded when |
| * the power well is not enabled, so just enable it in case |
| * we're going to unload/reload. */ |
| intel_display_set_init_power(dev_priv, true); |
| intel_power_domains_remove(dev_priv); |
| |
| i915_teardown_sysfs(dev); |
| |
| WARN_ON(unregister_oom_notifier(&dev_priv->mm.oom_notifier)); |
| unregister_shrinker(&dev_priv->mm.shrinker); |
| |
| io_mapping_free(dev_priv->gtt.mappable); |
| arch_phys_wc_del(dev_priv->gtt.mtrr); |
| |
| acpi_video_unregister(); |
| |
| if (drm_core_check_feature(dev, DRIVER_MODESET)) { |
| intel_fbdev_fini(dev); |
| intel_modeset_cleanup(dev); |
| cancel_work_sync(&dev_priv->console_resume_work); |
| |
| /* |
| * free the memory space allocated for the child device |
| * config parsed from VBT |
| */ |
| if (dev_priv->vbt.child_dev && dev_priv->vbt.child_dev_num) { |
| kfree(dev_priv->vbt.child_dev); |
| dev_priv->vbt.child_dev = NULL; |
| dev_priv->vbt.child_dev_num = 0; |
| } |
| |
| vga_switcheroo_unregister_client(dev->pdev); |
| vga_client_register(dev->pdev, NULL, NULL, NULL); |
| } |
| |
| /* Free error state after interrupts are fully disabled. */ |
| del_timer_sync(&dev_priv->gpu_error.hangcheck_timer); |
| cancel_work_sync(&dev_priv->gpu_error.work); |
| i915_destroy_error_state(dev); |
| |
| if (dev->pdev->msi_enabled) |
| pci_disable_msi(dev->pdev); |
| |
| intel_opregion_fini(dev); |
| |
| if (drm_core_check_feature(dev, DRIVER_MODESET)) { |
| /* Flush any outstanding unpin_work. */ |
| flush_workqueue(dev_priv->wq); |
| |
| mutex_lock(&dev->struct_mutex); |
| i915_gem_cleanup_ringbuffer(dev); |
| i915_gem_context_fini(dev); |
| WARN_ON(dev_priv->mm.aliasing_ppgtt); |
| mutex_unlock(&dev->struct_mutex); |
| i915_gem_cleanup_stolen(dev); |
| |
| if (!I915_NEED_GFX_HWS(dev)) |
| i915_free_hws(dev); |
| } |
| |
| WARN_ON(!list_empty(&dev_priv->vm_list)); |
| |
| drm_vblank_cleanup(dev); |
| |
| intel_teardown_gmbus(dev); |
| intel_teardown_mchbar(dev); |
| |
| destroy_workqueue(dev_priv->dp_wq); |
| destroy_workqueue(dev_priv->wq); |
| pm_qos_remove_request(&dev_priv->pm_qos); |
| |
| dev_priv->gtt.base.cleanup(&dev_priv->gtt.base); |
| |
| intel_uncore_fini(dev); |
| if (dev_priv->regs != NULL) |
| pci_iounmap(dev->pdev, dev_priv->regs); |
| |
| if (dev_priv->slab) |
| kmem_cache_destroy(dev_priv->slab); |
| |
| pci_dev_put(dev_priv->bridge_dev); |
| kfree(dev_priv); |
| |
| return 0; |
| } |
| |
| int i915_driver_open(struct drm_device *dev, struct drm_file *file) |
| { |
| int ret; |
| |
| ret = i915_gem_open(dev, file); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| /** |
| * i915_driver_lastclose - clean up after all DRM clients have exited |
| * @dev: DRM device |
| * |
| * Take care of cleaning up after all DRM clients have exited. In the |
| * mode setting case, we want to restore the kernel's initial mode (just |
| * in case the last client left us in a bad state). |
| * |
| * Additionally, in the non-mode setting case, we'll tear down the GTT |
| * and DMA structures, since the kernel won't be using them, and clea |
| * up any GEM state. |
| */ |
| void i915_driver_lastclose(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| /* On gen6+ we refuse to init without kms enabled, but then the drm core |
| * goes right around and calls lastclose. Check for this and don't clean |
| * up anything. */ |
| if (!dev_priv) |
| return; |
| |
| if (drm_core_check_feature(dev, DRIVER_MODESET)) { |
| intel_fbdev_restore_mode(dev); |
| vga_switcheroo_process_delayed_switch(); |
| return; |
| } |
| |
| i915_gem_lastclose(dev); |
| |
| i915_dma_cleanup(dev); |
| } |
| |
| void i915_driver_preclose(struct drm_device *dev, struct drm_file *file) |
| { |
| mutex_lock(&dev->struct_mutex); |
| i915_gem_context_close(dev, file); |
| i915_gem_release(dev, file); |
| mutex_unlock(&dev->struct_mutex); |
| } |
| |
| void i915_driver_postclose(struct drm_device *dev, struct drm_file *file) |
| { |
| struct drm_i915_file_private *file_priv = file->driver_priv; |
| |
| if (file_priv && file_priv->bsd_ring) |
| file_priv->bsd_ring = NULL; |
| kfree(file_priv); |
| } |
| |
| const struct drm_ioctl_desc i915_ioctls[] = { |
| DRM_IOCTL_DEF_DRV(I915_INIT, i915_dma_init, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), |
| DRM_IOCTL_DEF_DRV(I915_FLUSH, i915_flush_ioctl, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(I915_FLIP, i915_flip_bufs, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(I915_BATCHBUFFER, i915_batchbuffer, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(I915_IRQ_EMIT, i915_irq_emit, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(I915_IRQ_WAIT, i915_irq_wait, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(I915_GETPARAM, i915_getparam, DRM_AUTH|DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_SETPARAM, i915_setparam, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), |
| DRM_IOCTL_DEF_DRV(I915_ALLOC, drm_noop, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(I915_FREE, drm_noop, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(I915_INIT_HEAP, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), |
| DRM_IOCTL_DEF_DRV(I915_CMDBUFFER, i915_cmdbuffer, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(I915_DESTROY_HEAP, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), |
| DRM_IOCTL_DEF_DRV(I915_SET_VBLANK_PIPE, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), |
| DRM_IOCTL_DEF_DRV(I915_GET_VBLANK_PIPE, i915_vblank_pipe_get, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(I915_VBLANK_SWAP, i915_vblank_swap, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(I915_HWS_ADDR, i915_set_status_page, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), |
| DRM_IOCTL_DEF_DRV(I915_GEM_INIT, i915_gem_init_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY|DRM_UNLOCKED), |
| DRM_IOCTL_DEF_DRV(I915_GEM_EXECBUFFER, i915_gem_execbuffer, DRM_AUTH|DRM_UNLOCKED), |
| DRM_IOCTL_DEF_DRV(I915_GEM_EXECBUFFER2, i915_gem_execbuffer2, DRM_AUTH|DRM_UNLOCKED|DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_PIN, i915_gem_pin_ioctl, DRM_AUTH|DRM_ROOT_ONLY|DRM_UNLOCKED), |
| DRM_IOCTL_DEF_DRV(I915_GEM_UNPIN, i915_gem_unpin_ioctl, DRM_AUTH|DRM_ROOT_ONLY|DRM_UNLOCKED), |
| DRM_IOCTL_DEF_DRV(I915_GEM_BUSY, i915_gem_busy_ioctl, DRM_AUTH|DRM_UNLOCKED|DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_SET_CACHING, i915_gem_set_caching_ioctl, DRM_UNLOCKED|DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_GET_CACHING, i915_gem_get_caching_ioctl, DRM_UNLOCKED|DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_THROTTLE, i915_gem_throttle_ioctl, DRM_AUTH|DRM_UNLOCKED|DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_ENTERVT, i915_gem_entervt_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY|DRM_UNLOCKED), |
| DRM_IOCTL_DEF_DRV(I915_GEM_LEAVEVT, i915_gem_leavevt_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY|DRM_UNLOCKED), |
| DRM_IOCTL_DEF_DRV(I915_GEM_CREATE, i915_gem_create_ioctl, DRM_UNLOCKED|DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_PREAD, i915_gem_pread_ioctl, DRM_UNLOCKED|DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_PWRITE, i915_gem_pwrite_ioctl, DRM_UNLOCKED|DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_MMAP, i915_gem_mmap_ioctl, DRM_UNLOCKED|DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_MMAP_GTT, i915_gem_mmap_gtt_ioctl, DRM_UNLOCKED|DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_SET_DOMAIN, i915_gem_set_domain_ioctl, DRM_UNLOCKED|DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_SW_FINISH, i915_gem_sw_finish_ioctl, DRM_UNLOCKED|DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_SET_TILING, i915_gem_set_tiling, DRM_UNLOCKED|DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_GET_TILING, i915_gem_get_tiling, DRM_UNLOCKED|DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_GET_APERTURE, i915_gem_get_aperture_ioctl, DRM_UNLOCKED|DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GET_PIPE_FROM_CRTC_ID, intel_get_pipe_from_crtc_id, DRM_UNLOCKED), |
| DRM_IOCTL_DEF_DRV(I915_GEM_MADVISE, i915_gem_madvise_ioctl, DRM_UNLOCKED|DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_OVERLAY_PUT_IMAGE, intel_overlay_put_image, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED), |
| DRM_IOCTL_DEF_DRV(I915_OVERLAY_ATTRS, intel_overlay_attrs, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED), |
| DRM_IOCTL_DEF_DRV(I915_SET_SPRITE_COLORKEY, intel_sprite_set_colorkey, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED), |
| DRM_IOCTL_DEF_DRV(I915_GET_SPRITE_COLORKEY, intel_sprite_get_colorkey, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED), |
| DRM_IOCTL_DEF_DRV(I915_GEM_WAIT, i915_gem_wait_ioctl, DRM_AUTH|DRM_UNLOCKED|DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_CREATE, i915_gem_context_create_ioctl, DRM_UNLOCKED|DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_DESTROY, i915_gem_context_destroy_ioctl, DRM_UNLOCKED|DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_REG_READ, i915_reg_read_ioctl, DRM_UNLOCKED|DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GET_RESET_STATS, i915_get_reset_stats_ioctl, DRM_UNLOCKED|DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_USERPTR, i915_gem_userptr_ioctl, DRM_UNLOCKED|DRM_RENDER_ALLOW), |
| }; |
| |
| int i915_max_ioctl = ARRAY_SIZE(i915_ioctls); |
| |
| /* |
| * This is really ugly: Because old userspace abused the linux agp interface to |
| * manage the gtt, we need to claim that all intel devices are agp. For |
| * otherwise the drm core refuses to initialize the agp support code. |
| */ |
| int i915_driver_device_is_agp(struct drm_device *dev) |
| { |
| return 1; |
| } |