Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

Pull more powerpc bits from Ben Herrenschmidt:
 "Here are a few more powerpc bits for this merge window.  The bulk is
  made of two pull requests from Scott and Anatolij that I had missed
  previously (they arrived while I was away).  Since both their branches
  are in -next independently, and the content has been around for a
  little while, they can still go in.

  The rest is mostly bug and regression fixes, a small series of
  cleanups to our pseries cpuidle code (including moving it to the right
  place), and one new cpuidle bakend for the powernv platform.  I also
  wired up the new sched_attr syscalls"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (37 commits)
  powerpc: Wire up sched_setattr and sched_getattr syscalls
  powerpc/hugetlb: Replace __get_cpu_var with get_cpu_var
  powerpc: Make sure "cache" directory is removed when offlining cpu
  powerpc/mm: Fix mmap errno when MAP_FIXED is set and mapping exceeds the allowed address space
  powerpc/powernv/cpuidle: Back-end cpuidle driver for powernv platform.
  powerpc/pseries/cpuidle: smt-snooze-delay cleanup.
  powerpc/pseries/cpuidle: Remove MAX_IDLE_STATE macro.
  powerpc/pseries/cpuidle: Make cpuidle-pseries backend driver a non-module.
  powerpc/pseries/cpuidle: Use cpuidle_register() for initialisation.
  powerpc/pseries/cpuidle: Move processor_idle.c to drivers/cpuidle.
  powerpc: Fix 32-bit frames for signals delivered when transactional
  powerpc/iommu: Fix initialisation of DART iommu table
  powerpc/numa: Fix decimal permissions
  powerpc/mm: Fix compile error of pgtable-ppc64.h
  powerpc: Fix hw breakpoints on !HAVE_HW_BREAKPOINT configurations
  clk: corenet: Adds the clock binding
  powerpc/booke64: Guard e6500 tlb handler with CONFIG_PPC_FSL_BOOK3E
  powerpc/512x: dts: add MPC5125 clock specs
  powerpc/512x: clk: support MPC5121/5123/5125 SoC variants
  powerpc/512x: clk: enforce even SDHC divider values
  ...
diff --git a/Documentation/devicetree/bindings/clock/corenet-clock.txt b/Documentation/devicetree/bindings/clock/corenet-clock.txt
new file mode 100644
index 0000000..24711af
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/corenet-clock.txt
@@ -0,0 +1,134 @@
+* Clock Block on Freescale CoreNet Platforms
+
+Freescale CoreNet chips take primary clocking input from the external
+SYSCLK signal. The SYSCLK input (frequency) is multiplied using
+multiple phase locked loops (PLL) to create a variety of frequencies
+which can then be passed to a variety of internal logic, including
+cores and peripheral IP blocks.
+Please refer to the Reference Manual for details.
+
+1. Clock Block Binding
+
+Required properties:
+- compatible: Should contain a specific clock block compatible string
+	and a single chassis clock compatible string.
+	Clock block strings include, but not limited to, one of the:
+	* "fsl,p2041-clockgen"
+	* "fsl,p3041-clockgen"
+	* "fsl,p4080-clockgen"
+	* "fsl,p5020-clockgen"
+	* "fsl,p5040-clockgen"
+	* "fsl,t4240-clockgen"
+	* "fsl,b4420-clockgen"
+	* "fsl,b4860-clockgen"
+	Chassis clock strings include:
+	* "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks
+	* "fsl,qoriq-clockgen-2.0": for chassis 2.0 clocks
+- reg: Describes the address of the device's resources within the
+	address space defined by its parent bus, and resource zero
+	represents the clock register set
+- clock-frequency: Input system clock frequency
+
+Recommended properties:
+- ranges: Allows valid translation between child's address space and
+	parent's. Must be present if the device has sub-nodes.
+- #address-cells: Specifies the number of cells used to represent
+	physical base addresses.  Must be present if the device has
+	sub-nodes and set to 1 if present
+- #size-cells: Specifies the number of cells used to represent
+	the size of an address. Must be present if the device has
+	sub-nodes and set to 1 if present
+
+2. Clock Provider/Consumer Binding
+
+Most of the bindings are from the common clock binding[1].
+ [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : Should include one of the following:
+	* "fsl,qoriq-core-pll-1.0" for core PLL clocks (v1.0)
+	* "fsl,qoriq-core-pll-2.0" for core PLL clocks (v2.0)
+	* "fsl,qoriq-core-mux-1.0" for core mux clocks (v1.0)
+	* "fsl,qoriq-core-mux-2.0" for core mux clocks (v2.0)
+	* "fsl,qoriq-sysclk-1.0": for input system clock (v1.0).
+		It takes parent's clock-frequency as its clock.
+	* "fsl,qoriq-sysclk-2.0": for input system clock (v2.0).
+		It takes parent's clock-frequency as its clock.
+- #clock-cells: From common clock binding. The number of cells in a
+	clock-specifier. Should be <0> for "fsl,qoriq-sysclk-[1,2].0"
+	clocks, or <1> for "fsl,qoriq-core-pll-[1,2].0" clocks.
+	For "fsl,qoriq-core-pll-[1,2].0" clocks, the single
+	clock-specifier cell may take the following values:
+	* 0 - equal to the PLL frequency
+	* 1 - equal to the PLL frequency divided by 2
+	* 2 - equal to the PLL frequency divided by 4
+
+Recommended properties:
+- clocks: Should be the phandle of input parent clock
+- clock-names: From common clock binding, indicates the clock name
+- clock-output-names: From common clock binding, indicates the names of
+	output clocks
+- reg: Should be the offset and length of clock block base address.
+	The length should be 4.
+
+Example for clock block and clock provider:
+/ {
+	clockgen: global-utilities@e1000 {
+		compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
+		ranges = <0x0 0xe1000 0x1000>;
+		clock-frequency = <133333333>;
+		reg = <0xe1000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		sysclk: sysclk {
+			#clock-cells = <0>;
+			compatible = "fsl,qoriq-sysclk-1.0";
+			clock-output-names = "sysclk";
+		}
+
+		pll0: pll0@800 {
+			#clock-cells = <1>;
+			reg = <0x800 0x4>;
+			compatible = "fsl,qoriq-core-pll-1.0";
+			clocks = <&sysclk>;
+			clock-output-names = "pll0", "pll0-div2";
+		};
+
+		pll1: pll1@820 {
+			#clock-cells = <1>;
+			reg = <0x820 0x4>;
+			compatible = "fsl,qoriq-core-pll-1.0";
+			clocks = <&sysclk>;
+			clock-output-names = "pll1", "pll1-div2";
+		};
+
+		mux0: mux0@0 {
+			#clock-cells = <0>;
+			reg = <0x0 0x4>;
+			compatible = "fsl,qoriq-core-mux-1.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+			clock-output-names = "cmux0";
+		};
+
+		mux1: mux1@20 {
+			#clock-cells = <0>;
+			reg = <0x20 0x4>;
+			compatible = "fsl,qoriq-core-mux-1.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+			clock-output-names = "cmux1";
+		};
+	};
+  }
+
+Example for clock consumer:
+
+/ {
+	cpu0: PowerPC,e5500@0 {
+		...
+		clocks = <&mux0>;
+		...
+	};
+  }
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 25493a0..a5e5d2e 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -532,6 +532,7 @@
 
 config PPC_64K_PAGES
 	bool "64k page size" if 44x || PPC_STD_MMU_64 || PPC_BOOK3E_64
+	depends on !PPC_FSL_BOOK3E
 	select PPC_HAS_HASH_64K if PPC_STD_MMU_64
 
 config PPC_256K_PAGES
@@ -1045,11 +1046,6 @@
 
 source "crypto/Kconfig"
 
-config PPC_CLOCK
-	bool
-	default n
-	select HAVE_CLK
-
 config PPC_LIB_RHEAP
 	bool
 
diff --git a/arch/powerpc/boot/dts/ac14xx.dts b/arch/powerpc/boot/dts/ac14xx.dts
index a543c40..a1b8837 100644
--- a/arch/powerpc/boot/dts/ac14xx.dts
+++ b/arch/powerpc/boot/dts/ac14xx.dts
@@ -139,7 +139,14 @@
 		};
 	};
 
+	clocks {
+		osc {
+			clock-frequency = <25000000>;
+		};
+	};
+
 	soc@80000000 {
+		bus-frequency = <80000000>;	/* 80 MHz ips bus */
 
 		clock@f00 {
 			compatible = "fsl,mpc5121rev2-clock", "fsl,mpc5121-clock";
diff --git a/arch/powerpc/boot/dts/mpc5121.dtsi b/arch/powerpc/boot/dts/mpc5121.dtsi
index 2d7cb04..2c0e155 100644
--- a/arch/powerpc/boot/dts/mpc5121.dtsi
+++ b/arch/powerpc/boot/dts/mpc5121.dtsi
@@ -9,6 +9,8 @@
  * option) any later version.
  */
 
+#include <dt-bindings/clock/mpc512x-clock.h>
+
 /dts-v1/;
 
 / {
@@ -49,6 +51,10 @@
 		compatible = "fsl,mpc5121-mbx";
 		reg = <0x20000000 0x4000>;
 		interrupts = <66 0x8>;
+		clocks = <&clks MPC512x_CLK_MBX_BUS>,
+			 <&clks MPC512x_CLK_MBX_3D>,
+			 <&clks MPC512x_CLK_MBX>;
+		clock-names = "mbx-bus", "mbx-3d", "mbx";
 	};
 
 	sram@30000000 {
@@ -62,6 +68,8 @@
 		interrupts = <6 8>;
 		#address-cells = <1>;
 		#size-cells = <1>;
+		clocks = <&clks MPC512x_CLK_NFC>;
+		clock-names = "ipg";
 	};
 
 	localbus@80000020 {
@@ -73,6 +81,17 @@
 		ranges = <0x0 0x0 0xfc000000 0x04000000>;
 	};
 
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		osc: osc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <33000000>;
+		};
+	};
+
 	soc@80000000 {
 		compatible = "fsl,mpc5121-immr";
 		#address-cells = <1>;
@@ -117,9 +136,12 @@
 		};
 
 		/* Clock control */
-		clock@f00 {
+		clks: clock@f00 {
 			compatible = "fsl,mpc5121-clock";
 			reg = <0xf00 0x100>;
+			#clock-cells = <1>;
+			clocks = <&osc>;
+			clock-names = "osc";
 		};
 
 		/* Power Management Controller */
@@ -139,12 +161,24 @@
 			compatible = "fsl,mpc5121-mscan";
 			reg = <0x1300 0x80>;
 			interrupts = <12 0x8>;
+			clocks = <&clks MPC512x_CLK_BDLC>,
+				 <&clks MPC512x_CLK_IPS>,
+				 <&clks MPC512x_CLK_SYS>,
+				 <&clks MPC512x_CLK_REF>,
+				 <&clks MPC512x_CLK_MSCAN0_MCLK>;
+			clock-names = "ipg", "ips", "sys", "ref", "mclk";
 		};
 
 		can@1380 {
 			compatible = "fsl,mpc5121-mscan";
 			reg = <0x1380 0x80>;
 			interrupts = <13 0x8>;
+			clocks = <&clks MPC512x_CLK_BDLC>,
+				 <&clks MPC512x_CLK_IPS>,
+				 <&clks MPC512x_CLK_SYS>,
+				 <&clks MPC512x_CLK_REF>,
+				 <&clks MPC512x_CLK_MSCAN1_MCLK>;
+			clock-names = "ipg", "ips", "sys", "ref", "mclk";
 		};
 
 		sdhc@1500 {
@@ -153,6 +187,9 @@
 			interrupts = <8 0x8>;
 			dmas = <&dma0 30>;
 			dma-names = "rx-tx";
+			clocks = <&clks MPC512x_CLK_IPS>,
+				 <&clks MPC512x_CLK_SDHC>;
+			clock-names = "ipg", "per";
 		};
 
 		i2c@1700 {
@@ -161,6 +198,8 @@
 			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
 			reg = <0x1700 0x20>;
 			interrupts = <9 0x8>;
+			clocks = <&clks MPC512x_CLK_I2C>;
+			clock-names = "ipg";
 		};
 
 		i2c@1720 {
@@ -169,6 +208,8 @@
 			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
 			reg = <0x1720 0x20>;
 			interrupts = <10 0x8>;
+			clocks = <&clks MPC512x_CLK_I2C>;
+			clock-names = "ipg";
 		};
 
 		i2c@1740 {
@@ -177,6 +218,8 @@
 			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
 			reg = <0x1740 0x20>;
 			interrupts = <11 0x8>;
+			clocks = <&clks MPC512x_CLK_I2C>;
+			clock-names = "ipg";
 		};
 
 		i2ccontrol@1760 {
@@ -188,30 +231,48 @@
 			compatible = "fsl,mpc5121-axe";
 			reg = <0x2000 0x100>;
 			interrupts = <42 0x8>;
+			clocks = <&clks MPC512x_CLK_AXE>;
+			clock-names = "ipg";
 		};
 
 		display@2100 {
 			compatible = "fsl,mpc5121-diu";
 			reg = <0x2100 0x100>;
 			interrupts = <64 0x8>;
+			clocks = <&clks MPC512x_CLK_DIU>;
+			clock-names = "ipg";
 		};
 
 		can@2300 {
 			compatible = "fsl,mpc5121-mscan";
 			reg = <0x2300 0x80>;
 			interrupts = <90 0x8>;
+			clocks = <&clks MPC512x_CLK_BDLC>,
+				 <&clks MPC512x_CLK_IPS>,
+				 <&clks MPC512x_CLK_SYS>,
+				 <&clks MPC512x_CLK_REF>,
+				 <&clks MPC512x_CLK_MSCAN2_MCLK>;
+			clock-names = "ipg", "ips", "sys", "ref", "mclk";
 		};
 
 		can@2380 {
 			compatible = "fsl,mpc5121-mscan";
 			reg = <0x2380 0x80>;
 			interrupts = <91 0x8>;
+			clocks = <&clks MPC512x_CLK_BDLC>,
+				 <&clks MPC512x_CLK_IPS>,
+				 <&clks MPC512x_CLK_SYS>,
+				 <&clks MPC512x_CLK_REF>,
+				 <&clks MPC512x_CLK_MSCAN3_MCLK>;
+			clock-names = "ipg", "ips", "sys", "ref", "mclk";
 		};
 
 		viu@2400 {
 			compatible = "fsl,mpc5121-viu";
 			reg = <0x2400 0x400>;
 			interrupts = <67 0x8>;
+			clocks = <&clks MPC512x_CLK_VIU>;
+			clock-names = "ipg";
 		};
 
 		mdio@2800 {
@@ -219,6 +280,8 @@
 			reg = <0x2800 0x800>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clocks = <&clks MPC512x_CLK_FEC>;
+			clock-names = "per";
 		};
 
 		eth0: ethernet@2800 {
@@ -227,6 +290,8 @@
 			reg = <0x2800 0x800>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <4 0x8>;
+			clocks = <&clks MPC512x_CLK_FEC>;
+			clock-names = "per";
 		};
 
 		/* USB1 using external ULPI PHY */
@@ -238,6 +303,8 @@
 			interrupts = <43 0x8>;
 			dr_mode = "otg";
 			phy_type = "ulpi";
+			clocks = <&clks MPC512x_CLK_USB1>;
+			clock-names = "ipg";
 		};
 
 		/* USB0 using internal UTMI PHY */
@@ -249,6 +316,8 @@
 			interrupts = <44 0x8>;
 			dr_mode = "otg";
 			phy_type = "utmi_wide";
+			clocks = <&clks MPC512x_CLK_USB2>;
+			clock-names = "ipg";
 		};
 
 		/* IO control */
@@ -267,6 +336,8 @@
 			compatible = "fsl,mpc5121-pata";
 			reg = <0x10200 0x100>;
 			interrupts = <5 0x8>;
+			clocks = <&clks MPC512x_CLK_PATA>;
+			clock-names = "ipg";
 		};
 
 		/* 512x PSCs are not 52xx PSC compatible */
@@ -278,6 +349,9 @@
 			interrupts = <40 0x8>;
 			fsl,rx-fifo-size = <16>;
 			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC0>,
+				 <&clks MPC512x_CLK_PSC0_MCLK>;
+			clock-names = "ipg", "mclk";
 		};
 
 		/* PSC1 */
@@ -287,6 +361,9 @@
 			interrupts = <40 0x8>;
 			fsl,rx-fifo-size = <16>;
 			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC1>,
+				 <&clks MPC512x_CLK_PSC1_MCLK>;
+			clock-names = "ipg", "mclk";
 		};
 
 		/* PSC2 */
@@ -296,6 +373,9 @@
 			interrupts = <40 0x8>;
 			fsl,rx-fifo-size = <16>;
 			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC2>,
+				 <&clks MPC512x_CLK_PSC2_MCLK>;
+			clock-names = "ipg", "mclk";
 		};
 
 		/* PSC3 */
@@ -305,6 +385,9 @@
 			interrupts = <40 0x8>;
 			fsl,rx-fifo-size = <16>;
 			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC3>,
+				 <&clks MPC512x_CLK_PSC3_MCLK>;
+			clock-names = "ipg", "mclk";
 		};
 
 		/* PSC4 */
@@ -314,6 +397,9 @@
 			interrupts = <40 0x8>;
 			fsl,rx-fifo-size = <16>;
 			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC4>,
+				 <&clks MPC512x_CLK_PSC4_MCLK>;
+			clock-names = "ipg", "mclk";
 		};
 
 		/* PSC5 */
@@ -323,6 +409,9 @@
 			interrupts = <40 0x8>;
 			fsl,rx-fifo-size = <16>;
 			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC5>,
+				 <&clks MPC512x_CLK_PSC5_MCLK>;
+			clock-names = "ipg", "mclk";
 		};
 
 		/* PSC6 */
@@ -332,6 +421,9 @@
 			interrupts = <40 0x8>;
 			fsl,rx-fifo-size = <16>;
 			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC6>,
+				 <&clks MPC512x_CLK_PSC6_MCLK>;
+			clock-names = "ipg", "mclk";
 		};
 
 		/* PSC7 */
@@ -341,6 +433,9 @@
 			interrupts = <40 0x8>;
 			fsl,rx-fifo-size = <16>;
 			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC7>,
+				 <&clks MPC512x_CLK_PSC7_MCLK>;
+			clock-names = "ipg", "mclk";
 		};
 
 		/* PSC8 */
@@ -350,6 +445,9 @@
 			interrupts = <40 0x8>;
 			fsl,rx-fifo-size = <16>;
 			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC8>,
+				 <&clks MPC512x_CLK_PSC8_MCLK>;
+			clock-names = "ipg", "mclk";
 		};
 
 		/* PSC9 */
@@ -359,6 +457,9 @@
 			interrupts = <40 0x8>;
 			fsl,rx-fifo-size = <16>;
 			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC9>,
+				 <&clks MPC512x_CLK_PSC9_MCLK>;
+			clock-names = "ipg", "mclk";
 		};
 
 		/* PSC10 */
@@ -368,6 +469,9 @@
 			interrupts = <40 0x8>;
 			fsl,rx-fifo-size = <16>;
 			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC10>,
+				 <&clks MPC512x_CLK_PSC10_MCLK>;
+			clock-names = "ipg", "mclk";
 		};
 
 		/* PSC11 */
@@ -377,12 +481,17 @@
 			interrupts = <40 0x8>;
 			fsl,rx-fifo-size = <16>;
 			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC11>,
+				 <&clks MPC512x_CLK_PSC11_MCLK>;
+			clock-names = "ipg", "mclk";
 		};
 
 		pscfifo@11f00 {
 			compatible = "fsl,mpc5121-psc-fifo";
 			reg = <0x11f00 0x100>;
 			interrupts = <40 0x8>;
+			clocks = <&clks MPC512x_CLK_PSC_FIFO>;
+			clock-names = "ipg";
 		};
 
 		dma0: dma@14000 {
@@ -400,6 +509,8 @@
 		#address-cells = <3>;
 		#size-cells = <2>;
 		#interrupt-cells = <1>;
+		clocks = <&clks MPC512x_CLK_PCI>;
+		clock-names = "ipg";
 
 		reg = <0x80008500 0x100	/* internal registers */
 		       0x80008300 0x8>;	/* config space access registers */
diff --git a/arch/powerpc/boot/dts/mpc5125twr.dts b/arch/powerpc/boot/dts/mpc5125twr.dts
index a618dfc..e4f2974 100644
--- a/arch/powerpc/boot/dts/mpc5125twr.dts
+++ b/arch/powerpc/boot/dts/mpc5125twr.dts
@@ -12,6 +12,8 @@
  * option) any later version.
  */
 
+#include <dt-bindings/clock/mpc512x-clock.h>
+
 /dts-v1/;
 
 / {
@@ -54,6 +56,17 @@
 		reg = <0x30000000 0x08000>;		// 32K at 0x30000000
 	};
 
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		osc: osc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <33000000>;
+		};
+	};
+
 	soc@80000000 {
 		compatible = "fsl,mpc5121-immr";
 		#address-cells = <1>;
@@ -87,9 +100,12 @@
 			reg = <0xe00 0x100>;
 		};
 
-		clock@f00 {	// Clock control
+		clks: clock@f00 {	// Clock control
 			compatible = "fsl,mpc5121-clock";
 			reg = <0xf00 0x100>;
+			#clock-cells = <1>;
+			clocks = <&osc>;
+			clock-names = "osc";
 		};
 
 		pmc@1000{  // Power Management Controller
@@ -114,18 +130,33 @@
 			compatible = "fsl,mpc5121-mscan";
 			interrupts = <12 0x8>;
 			reg = <0x1300 0x80>;
+			clocks = <&clks MPC512x_CLK_BDLC>,
+				 <&clks MPC512x_CLK_IPS>,
+				 <&clks MPC512x_CLK_SYS>,
+				 <&clks MPC512x_CLK_REF>,
+				 <&clks MPC512x_CLK_MSCAN0_MCLK>;
+			clock-names = "ipg", "ips", "sys", "ref", "mclk";
 		};
 
 		can@1380 {
 			compatible = "fsl,mpc5121-mscan";
 			interrupts = <13 0x8>;
 			reg = <0x1380 0x80>;
+			clocks = <&clks MPC512x_CLK_BDLC>,
+				 <&clks MPC512x_CLK_IPS>,
+				 <&clks MPC512x_CLK_SYS>,
+				 <&clks MPC512x_CLK_REF>,
+				 <&clks MPC512x_CLK_MSCAN1_MCLK>;
+			clock-names = "ipg", "ips", "sys", "ref", "mclk";
 		};
 
 		sdhc@1500 {
 			compatible = "fsl,mpc5121-sdhc";
 			interrupts = <8 0x8>;
 			reg = <0x1500 0x100>;
+			clocks = <&clks MPC512x_CLK_IPS>,
+				 <&clks MPC512x_CLK_SDHC>;
+			clock-names = "ipg", "per";
 		};
 
 		i2c@1700 {
@@ -134,6 +165,8 @@
 			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
 			reg = <0x1700 0x20>;
 			interrupts = <0x9 0x8>;
+			clocks = <&clks MPC512x_CLK_I2C>;
+			clock-names = "ipg";
 		};
 
 		i2c@1720 {
@@ -142,6 +175,8 @@
 			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
 			reg = <0x1720 0x20>;
 			interrupts = <0xa 0x8>;
+			clocks = <&clks MPC512x_CLK_I2C>;
+			clock-names = "ipg";
 		};
 
 		i2c@1740 {
@@ -150,6 +185,8 @@
 			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
 			reg = <0x1740 0x20>;
 			interrupts = <0xb 0x8>;
+			clocks = <&clks MPC512x_CLK_I2C>;
+			clock-names = "ipg";
 		};
 
 		i2ccontrol@1760 {
@@ -161,6 +198,8 @@
 			compatible = "fsl,mpc5121-diu";
 			reg = <0x2100 0x100>;
 			interrupts = <64 0x8>;
+			clocks = <&clks MPC512x_CLK_DIU>;
+			clock-names = "ipg";
 		};
 
 		mdio@2800 {
@@ -180,6 +219,8 @@
 			interrupts = <4 0x8>;
 			phy-handle = < &phy0 >;
 			phy-connection-type = "rmii";
+			clocks = <&clks MPC512x_CLK_FEC>;
+			clock-names = "per";
 		};
 
 		// IO control
@@ -200,6 +241,8 @@
 			interrupts = <43 0x8>;
 			dr_mode = "host";
 			phy_type = "ulpi";
+			clocks = <&clks MPC512x_CLK_USB1>;
+			clock-names = "ipg";
 			status = "disabled";
 		};
 
@@ -211,6 +254,9 @@
 			interrupts = <40 0x8>;
 			fsl,rx-fifo-size = <16>;
 			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC1>,
+				 <&clks MPC512x_CLK_PSC1_MCLK>;
+			clock-names = "ipg", "mclk";
 		};
 
 		// PSC9 uart1 aka ttyPSC1
@@ -220,12 +266,17 @@
 			interrupts = <40 0x8>;
 			fsl,rx-fifo-size = <16>;
 			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC9>,
+				 <&clks MPC512x_CLK_PSC9_MCLK>;
+			clock-names = "ipg", "mclk";
 		};
 
 		pscfifo@11f00 {
 			compatible = "fsl,mpc5121-psc-fifo";
 			reg = <0x11f00 0x100>;
 			interrupts = <40 0x8>;
+			clocks = <&clks MPC512x_CLK_PSC_FIFO>;
+			clock-names = "ipg";
 		};
 
 		dma@14000 {
diff --git a/arch/powerpc/include/asm/clk_interface.h b/arch/powerpc/include/asm/clk_interface.h
deleted file mode 100644
index ab1882c..0000000
--- a/arch/powerpc/include/asm/clk_interface.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef __ASM_POWERPC_CLK_INTERFACE_H
-#define __ASM_POWERPC_CLK_INTERFACE_H
-
-#include <linux/clk.h>
-
-struct clk_interface {
-	struct clk*	(*clk_get)	(struct device *dev, const char *id);
-	int		(*clk_enable)	(struct clk *clk);
-	void		(*clk_disable)	(struct clk *clk);
-	unsigned long	(*clk_get_rate)	(struct clk *clk);
-	void		(*clk_put)	(struct clk *clk);
-	long		(*clk_round_rate) (struct clk *clk, unsigned long rate);
-	int 		(*clk_set_rate)	(struct clk *clk, unsigned long rate);
-	int		(*clk_set_parent) (struct clk *clk, struct clk *parent);
-	struct clk*	(*clk_get_parent) (struct clk *clk);
-};
-
-extern struct clk_interface clk_functions;
-
-#endif /* __ASM_POWERPC_CLK_INTERFACE_H */
diff --git a/arch/powerpc/include/asm/mpc5121.h b/arch/powerpc/include/asm/mpc5121.h
index 887d3d6..4a69cd1 100644
--- a/arch/powerpc/include/asm/mpc5121.h
+++ b/arch/powerpc/include/asm/mpc5121.h
@@ -37,7 +37,12 @@
 	u32	cccr;	/* CFM Clock Control Register */
 	u32	dccr;	/* DIU Clock Control Register */
 	u32	mscan_ccr[4];	/* MSCAN Clock Control Registers */
-	u8	res[0x98]; /* Reserved */
+	u32	out_ccr[4];	/* OUT CLK Configure Registers */
+	u32	rsv0[2];	/* Reserved */
+	u32	scfr3;		/* System Clock Frequency Register 3 */
+	u32	rsv1[3];	/* Reserved */
+	u32	spll_lock_cnt;	/* System PLL Lock Counter */
+	u8	res[0x6c];	/* Reserved */
 };
 
 /*
diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h
index d27960c..bc141c9 100644
--- a/arch/powerpc/include/asm/pgtable-ppc64.h
+++ b/arch/powerpc/include/asm/pgtable-ppc64.h
@@ -560,9 +560,9 @@
 			    pmd_t *pmdp);
 
 #define pmd_move_must_withdraw pmd_move_must_withdraw
-typedef struct spinlock spinlock_t;
-static inline int pmd_move_must_withdraw(spinlock_t *new_pmd_ptl,
-					 spinlock_t *old_pmd_ptl)
+struct spinlock;
+static inline int pmd_move_must_withdraw(struct spinlock *new_pmd_ptl,
+					 struct spinlock *old_pmd_ptl)
 {
 	/*
 	 * Archs like ppc64 use pgtable to store per pmd
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 8ca20ac..b62de43 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -450,13 +450,6 @@
 
 extern int powersave_nap;	/* set if nap mode can be used in idle loop */
 extern void power7_nap(void);
-
-#ifdef CONFIG_PSERIES_IDLE
-extern void update_smt_snooze_delay(int cpu, int residency);
-#else
-static inline void update_smt_snooze_delay(int cpu, int residency) {}
-#endif
-
 extern void flush_instruction_cache(void);
 extern void hard_reset_now(void);
 extern void poweroff_now(void);
diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h
index 43523fe..3ddf702 100644
--- a/arch/powerpc/include/asm/systbl.h
+++ b/arch/powerpc/include/asm/systbl.h
@@ -359,3 +359,5 @@
 COMPAT_SYS(process_vm_writev)
 SYSCALL(finit_module)
 SYSCALL(ni_syscall) /* sys_kcmp */
+SYSCALL_SPU(sched_setattr)
+SYSCALL_SPU(sched_getattr)
diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h
index 3ca819f..4494f02 100644
--- a/arch/powerpc/include/asm/unistd.h
+++ b/arch/powerpc/include/asm/unistd.h
@@ -12,7 +12,7 @@
 #include <uapi/asm/unistd.h>
 
 
-#define __NR_syscalls		355
+#define __NR_syscalls		357
 
 #define __NR__exit __NR_exit
 #define NR_syscalls	__NR_syscalls
diff --git a/arch/powerpc/include/uapi/asm/unistd.h b/arch/powerpc/include/uapi/asm/unistd.h
index 74cb4d7..881bf2e 100644
--- a/arch/powerpc/include/uapi/asm/unistd.h
+++ b/arch/powerpc/include/uapi/asm/unistd.h
@@ -377,6 +377,7 @@
 #define __NR_process_vm_writev	352
 #define __NR_finit_module	353
 #define __NR_kcmp		354
-
+#define __NR_sched_setattr	355
+#define __NR_sched_getattr	356
 
 #endif /* _UAPI_ASM_POWERPC_UNISTD_H_ */
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 904d713..fcc9a89 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -48,7 +48,6 @@
 obj-$(CONFIG_PPC_970_NAP)	+= idle_power4.o
 obj-$(CONFIG_PPC_P7_NAP)	+= idle_power7.o
 obj-$(CONFIG_PPC_OF)		+= of_platform.o prom_parse.o
-obj-$(CONFIG_PPC_CLOCK)		+= clock.o
 procfs-y			:= proc_powerpc.o
 obj-$(CONFIG_PROC_FS)		+= $(procfs-y)
 rtaspci-$(CONFIG_PPC64)-$(CONFIG_PCI)	:= rtas_pci.o
diff --git a/arch/powerpc/kernel/cacheinfo.c b/arch/powerpc/kernel/cacheinfo.c
index abfa011..2912b87 100644
--- a/arch/powerpc/kernel/cacheinfo.c
+++ b/arch/powerpc/kernel/cacheinfo.c
@@ -793,6 +793,9 @@
 {
 	remove_index_dirs(cache_dir);
 
+	/* Remove cache dir from sysfs */
+	kobject_del(cache_dir->kobj);
+
 	kobject_put(cache_dir->kobj);
 
 	kfree(cache_dir);
diff --git a/arch/powerpc/kernel/clock.c b/arch/powerpc/kernel/clock.c
deleted file mode 100644
index a764b47..0000000
--- a/arch/powerpc/kernel/clock.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * Dummy clk implementations for powerpc.
- * These need to be overridden in platform code.
- */
-
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/errno.h>
-#include <linux/export.h>
-#include <asm/clk_interface.h>
-
-struct clk_interface clk_functions;
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	if (clk_functions.clk_get)
-		return clk_functions.clk_get(dev, id);
-	return ERR_PTR(-ENOSYS);
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-	if (clk_functions.clk_put)
-		clk_functions.clk_put(clk);
-}
-EXPORT_SYMBOL(clk_put);
-
-int clk_enable(struct clk *clk)
-{
-	if (clk_functions.clk_enable)
-		return clk_functions.clk_enable(clk);
-	return -ENOSYS;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-	if (clk_functions.clk_disable)
-		clk_functions.clk_disable(clk);
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	if (clk_functions.clk_get_rate)
-		return clk_functions.clk_get_rate(clk);
-	return 0;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	if (clk_functions.clk_round_rate)
-		return clk_functions.clk_round_rate(clk, rate);
-	return -ENOSYS;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	if (clk_functions.clk_set_rate)
-		return clk_functions.clk_set_rate(clk, rate);
-	return -ENOSYS;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-struct clk *clk_get_parent(struct clk *clk)
-{
-	if (clk_functions.clk_get_parent)
-		return clk_functions.clk_get_parent(clk);
-	return ERR_PTR(-ENOSYS);
-}
-EXPORT_SYMBOL(clk_get_parent);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	if (clk_functions.clk_set_parent)
-		return clk_functions.clk_set_parent(clk, parent);
-	return -ENOSYS;
-}
-EXPORT_SYMBOL(clk_set_parent);
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 64b7a6e..8d4c247f1 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -811,7 +811,7 @@
  * schedule DABR
  */
 #ifndef CONFIG_HAVE_HW_BREAKPOINT
-	if (unlikely(hw_brk_match(&__get_cpu_var(current_brk), &new->thread.hw_brk)))
+	if (unlikely(!hw_brk_match(&__get_cpu_var(current_brk), &new->thread.hw_brk)))
 		set_breakpoint(&new->thread.hw_brk);
 #endif /* CONFIG_HAVE_HW_BREAKPOINT */
 #endif
diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c
index 6ce69e6..a67e00a 100644
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -1022,29 +1022,24 @@
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
 	tm_frame = &rt_sf->uc_transact.uc_mcontext;
 	if (MSR_TM_ACTIVE(regs->msr)) {
+		if (__put_user((unsigned long)&rt_sf->uc_transact,
+			       &rt_sf->uc.uc_link) ||
+		    __put_user((unsigned long)tm_frame,
+			       &rt_sf->uc_transact.uc_regs))
+			goto badframe;
 		if (save_tm_user_regs(regs, frame, tm_frame, sigret))
 			goto badframe;
 	}
 	else
 #endif
 	{
+		if (__put_user(0, &rt_sf->uc.uc_link))
+			goto badframe;
 		if (save_user_regs(regs, frame, tm_frame, sigret, 1))
 			goto badframe;
 	}
 	regs->link = tramp;
 
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-	if (MSR_TM_ACTIVE(regs->msr)) {
-		if (__put_user((unsigned long)&rt_sf->uc_transact,
-			       &rt_sf->uc.uc_link)
-		    || __put_user((unsigned long)tm_frame, &rt_sf->uc_transact.uc_regs))
-			goto badframe;
-	}
-	else
-#endif
-		if (__put_user(0, &rt_sf->uc.uc_link))
-			goto badframe;
-
 	current->thread.fp_state.fpscr = 0;	/* turn off all fp exceptions */
 
 	/* create a stack frame for the caller of the handler */
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index d4a43e6..97e1dc9 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -51,8 +51,6 @@
 		return -EINVAL;
 
 	per_cpu(smt_snooze_delay, cpu->dev.id) = snooze;
-	update_smt_snooze_delay(cpu->dev.id, snooze);
-
 	return count;
 }
 
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 90bb6d9..eb92365 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -472,12 +472,13 @@
 {
 	struct hugepd_freelist **batchp;
 
-	batchp = &__get_cpu_var(hugepd_freelist_cur);
+	batchp = &get_cpu_var(hugepd_freelist_cur);
 
 	if (atomic_read(&tlb->mm->mm_users) < 2 ||
 	    cpumask_equal(mm_cpumask(tlb->mm),
 			  cpumask_of(smp_processor_id()))) {
 		kmem_cache_free(hugepte_cache, hugepte);
+        put_cpu_var(hugepd_freelist_cur);
 		return;
 	}
 
@@ -491,6 +492,7 @@
 		call_rcu_sched(&(*batchp)->rcu, hugepd_free_rcu_callback);
 		*batchp = NULL;
 	}
+	put_cpu_var(hugepd_freelist_cur);
 }
 #endif
 
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 86a63de..30a42e2 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -1785,7 +1785,7 @@
 static int topology_update_init(void)
 {
 	start_topology_update();
-	proc_create("powerpc/topology_updates", 644, NULL, &topology_ops);
+	proc_create("powerpc/topology_updates", 0644, NULL, &topology_ops);
 
 	return 0;
 }
diff --git a/arch/powerpc/mm/slice.c b/arch/powerpc/mm/slice.c
index 7ce9cf3..b0c75cc 100644
--- a/arch/powerpc/mm/slice.c
+++ b/arch/powerpc/mm/slice.c
@@ -408,7 +408,7 @@
 	if (fixed && (addr & ((1ul << pshift) - 1)))
 		return -EINVAL;
 	if (fixed && addr > (mm->task_size - len))
-		return -EINVAL;
+		return -ENOMEM;
 
 	/* If hint, make sure it matches our alignment restrictions */
 	if (!fixed && addr) {
diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S
index 16250b1..c95eb32 100644
--- a/arch/powerpc/mm/tlb_low_64e.S
+++ b/arch/powerpc/mm/tlb_low_64e.S
@@ -240,6 +240,7 @@
 	beq	tlb_miss_common_bolted
 	b	itlb_miss_kernel_bolted
 
+#ifdef CONFIG_PPC_FSL_BOOK3E
 /*
  * TLB miss handling for e6500 and derivatives, using hardware tablewalk.
  *
@@ -409,7 +410,7 @@
 	TLB_MISS_STATS_I(MMSTAT_TLB_MISS_NORM_FAULT)
 	tlb_epilog_bolted
 	b	exc_instruction_storage_book3e
-
+#endif /* CONFIG_PPC_FSL_BOOK3E */
 
 /**********************************************************************
  *                                                                    *
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index 735839b..b37a58e 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -557,10 +557,12 @@
 		patch_exception(0x1c0, exc_data_tlb_miss_htw_book3e);
 		patch_exception(0x1e0, exc_instruction_tlb_miss_htw_book3e);
 		break;
+#ifdef CONFIG_PPC_FSL_BOOK3E
 	case PPC_HTW_E6500:
 		patch_exception(0x1c0, exc_data_tlb_miss_e6500_book3e);
 		patch_exception(0x1e0, exc_instruction_tlb_miss_e6500_book3e);
 		break;
+#endif
 	}
 	pr_info("MMU: Book3E HW tablewalk %s\n",
 		book3e_htw_mode != PPC_HTW_NONE ? "enabled" : "not supported");
diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig
index fc9c1cb..5aa3f4b 100644
--- a/arch/powerpc/platforms/512x/Kconfig
+++ b/arch/powerpc/platforms/512x/Kconfig
@@ -1,9 +1,9 @@
 config PPC_MPC512x
 	bool "512x-based boards"
 	depends on 6xx
+	select COMMON_CLK
 	select FSL_SOC
 	select IPIC
-	select PPC_CLOCK
 	select PPC_PCI_CHOICE
 	select FSL_PCI if PCI
 	select ARCH_WANT_OPTIONAL_GPIOLIB
diff --git a/arch/powerpc/platforms/512x/Makefile b/arch/powerpc/platforms/512x/Makefile
index 72fb934..0169312 100644
--- a/arch/powerpc/platforms/512x/Makefile
+++ b/arch/powerpc/platforms/512x/Makefile
@@ -1,7 +1,8 @@
 #
 # Makefile for the Freescale PowerPC 512x linux kernel.
 #
-obj-y				+= clock.o mpc512x_shared.o
+obj-$(CONFIG_COMMON_CLK)	+= clock-commonclk.o
+obj-y				+= mpc512x_shared.o
 obj-$(CONFIG_MPC5121_ADS)	+= mpc5121_ads.o mpc5121_ads_cpld.o
 obj-$(CONFIG_MPC512x_GENERIC)	+= mpc512x_generic.o
 obj-$(CONFIG_PDM360NG)		+= pdm360ng.o
diff --git a/arch/powerpc/platforms/512x/clock-commonclk.c b/arch/powerpc/platforms/512x/clock-commonclk.c
new file mode 100644
index 0000000..6eb614a
--- /dev/null
+++ b/arch/powerpc/platforms/512x/clock-commonclk.c
@@ -0,0 +1,1221 @@
+/*
+ * Copyright (C) 2013 DENX Software Engineering
+ *
+ * Gerhard Sittig, <gsi@denx.de>
+ *
+ * common clock driver support for the MPC512x platform
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <asm/mpc5121.h>
+#include <dt-bindings/clock/mpc512x-clock.h>
+
+#include "mpc512x.h"		/* our public mpc5121_clk_init() API */
+
+/* helpers to keep the MCLK intermediates "somewhere" in our table */
+enum {
+	MCLK_IDX_MUX0,
+	MCLK_IDX_EN0,
+	MCLK_IDX_DIV0,
+	MCLK_MAX_IDX,
+};
+
+#define NR_PSCS			12
+#define NR_MSCANS		4
+#define NR_SPDIFS		1
+#define NR_OUTCLK		4
+#define NR_MCLKS		(NR_PSCS + NR_MSCANS + NR_SPDIFS + NR_OUTCLK)
+
+/* extend the public set of clocks by adding internal slots for management */
+enum {
+	/* arrange for adjacent numbers after the public set */
+	MPC512x_CLK_START_PRIVATE = MPC512x_CLK_LAST_PUBLIC,
+	/* clocks which aren't announced to the public */
+	MPC512x_CLK_DDR,
+	MPC512x_CLK_MEM,
+	MPC512x_CLK_IIM,
+	/* intermediates in div+gate combos or fractional dividers */
+	MPC512x_CLK_DDR_UG,
+	MPC512x_CLK_SDHC_x4,
+	MPC512x_CLK_SDHC_UG,
+	MPC512x_CLK_SDHC2_UG,
+	MPC512x_CLK_DIU_x4,
+	MPC512x_CLK_DIU_UG,
+	MPC512x_CLK_MBX_BUS_UG,
+	MPC512x_CLK_MBX_UG,
+	MPC512x_CLK_MBX_3D_UG,
+	MPC512x_CLK_PCI_UG,
+	MPC512x_CLK_NFC_UG,
+	MPC512x_CLK_LPC_UG,
+	MPC512x_CLK_SPDIF_TX_IN,
+	/* intermediates for the mux+gate+div+mux MCLK generation */
+	MPC512x_CLK_MCLKS_FIRST,
+	MPC512x_CLK_MCLKS_LAST = MPC512x_CLK_MCLKS_FIRST
+				+ NR_MCLKS * MCLK_MAX_IDX,
+	/* internal, symbolic spec for the number of slots */
+	MPC512x_CLK_LAST_PRIVATE,
+};
+
+/* data required for the OF clock provider registration */
+static struct clk *clks[MPC512x_CLK_LAST_PRIVATE];
+static struct clk_onecell_data clk_data;
+
+/* CCM register access */
+static struct mpc512x_ccm __iomem *clkregs;
+static DEFINE_SPINLOCK(clklock);
+
+/* SoC variants {{{ */
+
+/*
+ * tell SoC variants apart as they are rather similar yet not identical,
+ * cache the result in an enum to not repeatedly run the expensive OF test
+ *
+ * MPC5123 is an MPC5121 without the MBX graphics accelerator
+ *
+ * MPC5125 has many more differences: no MBX, no AXE, no VIU, no SPDIF,
+ * no PATA, no SATA, no PCI, two FECs (of different compatibility name),
+ * only 10 PSCs (of different compatibility name), two SDHCs, different
+ * NFC IP block, output clocks, system PLL status query, different CPMF
+ * interpretation, no CFM, different fourth PSC/CAN mux0 input -- yet
+ * those differences can get folded into this clock provider support
+ * code and don't warrant a separate highly redundant implementation
+ */
+
+static enum soc_type {
+	MPC512x_SOC_MPC5121,
+	MPC512x_SOC_MPC5123,
+	MPC512x_SOC_MPC5125,
+} soc;
+
+static void mpc512x_clk_determine_soc(void)
+{
+	if (of_machine_is_compatible("fsl,mpc5121")) {
+		soc = MPC512x_SOC_MPC5121;
+		return;
+	}
+	if (of_machine_is_compatible("fsl,mpc5123")) {
+		soc = MPC512x_SOC_MPC5123;
+		return;
+	}
+	if (of_machine_is_compatible("fsl,mpc5125")) {
+		soc = MPC512x_SOC_MPC5125;
+		return;
+	}
+}
+
+static bool soc_has_mbx(void)
+{
+	if (soc == MPC512x_SOC_MPC5121)
+		return true;
+	return false;
+}
+
+static bool soc_has_axe(void)
+{
+	if (soc == MPC512x_SOC_MPC5125)
+		return false;
+	return true;
+}
+
+static bool soc_has_viu(void)
+{
+	if (soc == MPC512x_SOC_MPC5125)
+		return false;
+	return true;
+}
+
+static bool soc_has_spdif(void)
+{
+	if (soc == MPC512x_SOC_MPC5125)
+		return false;
+	return true;
+}
+
+static bool soc_has_pata(void)
+{
+	if (soc == MPC512x_SOC_MPC5125)
+		return false;
+	return true;
+}
+
+static bool soc_has_sata(void)
+{
+	if (soc == MPC512x_SOC_MPC5125)
+		return false;
+	return true;
+}
+
+static bool soc_has_pci(void)
+{
+	if (soc == MPC512x_SOC_MPC5125)
+		return false;
+	return true;
+}
+
+static bool soc_has_fec2(void)
+{
+	if (soc == MPC512x_SOC_MPC5125)
+		return true;
+	return false;
+}
+
+static int soc_max_pscnum(void)
+{
+	if (soc == MPC512x_SOC_MPC5125)
+		return 10;
+	return 12;
+}
+
+static bool soc_has_sdhc2(void)
+{
+	if (soc == MPC512x_SOC_MPC5125)
+		return true;
+	return false;
+}
+
+static bool soc_has_nfc_5125(void)
+{
+	if (soc == MPC512x_SOC_MPC5125)
+		return true;
+	return false;
+}
+
+static bool soc_has_outclk(void)
+{
+	if (soc == MPC512x_SOC_MPC5125)
+		return true;
+	return false;
+}
+
+static bool soc_has_cpmf_0_bypass(void)
+{
+	if (soc == MPC512x_SOC_MPC5125)
+		return true;
+	return false;
+}
+
+static bool soc_has_mclk_mux0_canin(void)
+{
+	if (soc == MPC512x_SOC_MPC5125)
+		return true;
+	return false;
+}
+
+/* }}} SoC variants */
+/* common clk API wrappers {{{ */
+
+/* convenience wrappers around the common clk API */
+static inline struct clk *mpc512x_clk_fixed(const char *name, int rate)
+{
+	return clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate);
+}
+
+static inline struct clk *mpc512x_clk_factor(
+	const char *name, const char *parent_name,
+	int mul, int div)
+{
+	int clkflags;
+
+	clkflags = CLK_SET_RATE_PARENT;
+	return clk_register_fixed_factor(NULL, name, parent_name, clkflags,
+					 mul, div);
+}
+
+static inline struct clk *mpc512x_clk_divider(
+	const char *name, const char *parent_name, u8 clkflags,
+	u32 __iomem *reg, u8 pos, u8 len, int divflags)
+{
+	return clk_register_divider(NULL, name, parent_name, clkflags,
+				    reg, pos, len, divflags, &clklock);
+}
+
+static inline struct clk *mpc512x_clk_divtable(
+	const char *name, const char *parent_name,
+	u32 __iomem *reg, u8 pos, u8 len,
+	const struct clk_div_table *divtab)
+{
+	u8 divflags;
+
+	divflags = 0;
+	return clk_register_divider_table(NULL, name, parent_name, 0,
+					  reg, pos, len, divflags,
+					  divtab, &clklock);
+}
+
+static inline struct clk *mpc512x_clk_gated(
+	const char *name, const char *parent_name,
+	u32 __iomem *reg, u8 pos)
+{
+	int clkflags;
+
+	clkflags = CLK_SET_RATE_PARENT;
+	return clk_register_gate(NULL, name, parent_name, clkflags,
+				 reg, pos, 0, &clklock);
+}
+
+static inline struct clk *mpc512x_clk_muxed(const char *name,
+	const char **parent_names, int parent_count,
+	u32 __iomem *reg, u8 pos, u8 len)
+{
+	int clkflags;
+	u8 muxflags;
+
+	clkflags = CLK_SET_RATE_PARENT;
+	muxflags = 0;
+	return clk_register_mux(NULL, name,
+				parent_names, parent_count, clkflags,
+				reg, pos, len, muxflags, &clklock);
+}
+
+/* }}} common clk API wrappers */
+
+/* helper to isolate a bit field from a register */
+static inline int get_bit_field(uint32_t __iomem *reg, uint8_t pos, uint8_t len)
+{
+	uint32_t val;
+
+	val = in_be32(reg);
+	val >>= pos;
+	val &= (1 << len) - 1;
+	return val;
+}
+
+/* get the SPMF and translate it into the "sys pll" multiplier */
+static int get_spmf_mult(void)
+{
+	static int spmf_to_mult[] = {
+		68, 1, 12, 16, 20, 24, 28, 32,
+		36, 40, 44, 48, 52, 56, 60, 64,
+	};
+	int spmf;
+
+	spmf = get_bit_field(&clkregs->spmr, 24, 4);
+	return spmf_to_mult[spmf];
+}
+
+/*
+ * get the SYS_DIV value and translate it into a divide factor
+ *
+ * values returned from here are a multiple of the real factor since the
+ * divide ratio is fractional
+ */
+static int get_sys_div_x2(void)
+{
+	static int sysdiv_code_to_x2[] = {
+		4, 5, 6, 7, 8, 9, 10, 14,
+		12, 16, 18, 22, 20, 24, 26, 30,
+		28, 32, 34, 38, 36, 40, 42, 46,
+		44, 48, 50, 54, 52, 56, 58, 62,
+		60, 64, 66,
+	};
+	int divcode;
+
+	divcode = get_bit_field(&clkregs->scfr2, 26, 6);
+	return sysdiv_code_to_x2[divcode];
+}
+
+/*
+ * get the CPMF value and translate it into a multiplier factor
+ *
+ * values returned from here are a multiple of the real factor since the
+ * multiplier ratio is fractional
+ */
+static int get_cpmf_mult_x2(void)
+{
+	static int cpmf_to_mult_x36[] = {
+		/* 0b000 is "times 36" */
+		72, 2, 2, 3, 4, 5, 6, 7,
+	};
+	static int cpmf_to_mult_0by[] = {
+		/* 0b000 is "bypass" */
+		2, 2, 2, 3, 4, 5, 6, 7,
+	};
+
+	int *cpmf_to_mult;
+	int cpmf;
+
+	cpmf = get_bit_field(&clkregs->spmr, 16, 4);
+	if (soc_has_cpmf_0_bypass())
+		cpmf_to_mult = cpmf_to_mult_0by;
+	else
+		cpmf_to_mult = cpmf_to_mult_x36;
+	return cpmf_to_mult[cpmf];
+}
+
+/*
+ * some of the clock dividers do scale in a linear way, yet not all of
+ * their bit combinations are legal; use a divider table to get a
+ * resulting set of applicable divider values
+ */
+
+/* applies to the IPS_DIV, and PCI_DIV values */
+static struct clk_div_table divtab_2346[] = {
+	{ .val = 2, .div = 2, },
+	{ .val = 3, .div = 3, },
+	{ .val = 4, .div = 4, },
+	{ .val = 6, .div = 6, },
+	{ .div = 0, },
+};
+
+/* applies to the MBX_DIV, LPC_DIV, and NFC_DIV values */
+static struct clk_div_table divtab_1234[] = {
+	{ .val = 1, .div = 1, },
+	{ .val = 2, .div = 2, },
+	{ .val = 3, .div = 3, },
+	{ .val = 4, .div = 4, },
+	{ .div = 0, },
+};
+
+static int get_freq_from_dt(char *propname)
+{
+	struct device_node *np;
+	const unsigned int *prop;
+	int val;
+
+	val = 0;
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-immr");
+	if (np) {
+		prop = of_get_property(np, propname, NULL);
+		if (prop)
+			val = *prop;
+	    of_node_put(np);
+	}
+	return val;
+}
+
+static void mpc512x_clk_preset_data(void)
+{
+	size_t i;
+
+	for (i = 0; i < ARRAY_SIZE(clks); i++)
+		clks[i] = ERR_PTR(-ENODEV);
+}
+
+/*
+ * - receives the "bus frequency" from the caller (that's the IPS clock
+ *   rate, the historical source of clock information)
+ * - fetches the system PLL multiplier and divider values as well as the
+ *   IPS divider value from hardware
+ * - determines the REF clock rate either from the XTAL/OSC spec (if
+ *   there is a device tree node describing the oscillator) or from the
+ *   IPS bus clock (supported for backwards compatibility, such that
+ *   setups without XTAL/OSC specs keep working)
+ * - creates the "ref" clock item in the clock tree, such that
+ *   subsequent code can create the remainder of the hierarchy (REF ->
+ *   SYS -> CSB -> IPS) from the REF clock rate and the returned mul/div
+ *   values
+ */
+static void mpc512x_clk_setup_ref_clock(struct device_node *np, int bus_freq,
+					int *sys_mul, int *sys_div,
+					int *ips_div)
+{
+	struct clk *osc_clk;
+	int calc_freq;
+
+	/* fetch mul/div factors from the hardware */
+	*sys_mul = get_spmf_mult();
+	*sys_mul *= 2;		/* compensate for the fractional divider */
+	*sys_div = get_sys_div_x2();
+	*ips_div = get_bit_field(&clkregs->scfr1, 23, 3);
+
+	/* lookup the oscillator clock for its rate */
+	osc_clk = of_clk_get_by_name(np, "osc");
+
+	/*
+	 * either descend from OSC to REF (and in bypassing verify the
+	 * IPS rate), or backtrack from IPS and multiplier values that
+	 * were fetched from hardware to REF and thus to the OSC value
+	 *
+	 * in either case the REF clock gets created here and the
+	 * remainder of the clock tree can get spanned from there
+	 */
+	if (!IS_ERR(osc_clk)) {
+		clks[MPC512x_CLK_REF] = mpc512x_clk_factor("ref", "osc", 1, 1);
+		calc_freq = clk_get_rate(clks[MPC512x_CLK_REF]);
+		calc_freq *= *sys_mul;
+		calc_freq /= *sys_div;
+		calc_freq /= 2;
+		calc_freq /= *ips_div;
+		if (bus_freq && calc_freq != bus_freq)
+			pr_warn("calc rate %d != OF spec %d\n",
+				calc_freq, bus_freq);
+	} else {
+		calc_freq = bus_freq;	/* start with IPS */
+		calc_freq *= *ips_div;	/* IPS -> CSB */
+		calc_freq *= 2;		/* CSB -> SYS */
+		calc_freq *= *sys_div;	/* SYS -> PLL out */
+		calc_freq /= *sys_mul;	/* PLL out -> REF == OSC */
+		clks[MPC512x_CLK_REF] = mpc512x_clk_fixed("ref", calc_freq);
+	}
+}
+
+/* MCLK helpers {{{ */
+
+/*
+ * helper code for the MCLK subtree setup
+ *
+ * the overview in section 5.2.4 of the MPC5121e Reference Manual rev4
+ * suggests that all instances of the "PSC clock generation" are equal,
+ * and that one might re-use the PSC setup for MSCAN clock generation
+ * (section 5.2.5) as well, at least the logic if not the data for
+ * description
+ *
+ * the details (starting at page 5-20) show differences in the specific
+ * inputs of the first mux stage ("can clk in", "spdif tx"), and the
+ * factual non-availability of the second mux stage (it's present yet
+ * only one input is valid)
+ *
+ * the MSCAN clock related registers (starting at page 5-35) all
+ * reference "spdif clk" at the first mux stage and don't mention any
+ * "can clk" at all, which somehow is unexpected
+ *
+ * TODO re-check the document, and clarify whether the RM is correct in
+ * the overview or in the details, and whether the difference is a
+ * clipboard induced error or results from chip revisions
+ *
+ * it turns out that the RM rev4 as of 2012-06 talks about "can" for the
+ * PSCs while RM rev3 as of 2008-10 talks about "spdif", so I guess that
+ * first a doc update is required which better reflects reality in the
+ * SoC before the implementation should follow while no questions remain
+ */
+
+/*
+ * note that this declaration raises a checkpatch warning, but
+ * it's the very data type dictated by <linux/clk-provider.h>,
+ * "fixing" this warning will break compilation
+ */
+static const char *parent_names_mux0_spdif[] = {
+	"sys", "ref", "psc-mclk-in", "spdif-tx",
+};
+
+static const char *parent_names_mux0_canin[] = {
+	"sys", "ref", "psc-mclk-in", "can-clk-in",
+};
+
+enum mclk_type {
+	MCLK_TYPE_PSC,
+	MCLK_TYPE_MSCAN,
+	MCLK_TYPE_SPDIF,
+	MCLK_TYPE_OUTCLK,
+};
+
+struct mclk_setup_data {
+	enum mclk_type type;
+	bool has_mclk1;
+	const char *name_mux0;
+	const char *name_en0;
+	const char *name_div0;
+	const char *parent_names_mux1[2];
+	const char *name_mclk;
+};
+
+#define MCLK_SETUP_DATA_PSC(id) { \
+	MCLK_TYPE_PSC, 0, \
+	"psc" #id "-mux0", \
+	"psc" #id "-en0", \
+	"psc" #id "_mclk_div", \
+	{ "psc" #id "_mclk_div", "dummy", }, \
+	"psc" #id "_mclk", \
+}
+
+#define MCLK_SETUP_DATA_MSCAN(id) { \
+	MCLK_TYPE_MSCAN, 0, \
+	"mscan" #id "-mux0", \
+	"mscan" #id "-en0", \
+	"mscan" #id "_mclk_div", \
+	{ "mscan" #id "_mclk_div", "dummy", }, \
+	"mscan" #id "_mclk", \
+}
+
+#define MCLK_SETUP_DATA_SPDIF { \
+	MCLK_TYPE_SPDIF, 1, \
+	"spdif-mux0", \
+	"spdif-en0", \
+	"spdif_mclk_div", \
+	{ "spdif_mclk_div", "spdif-rx", }, \
+	"spdif_mclk", \
+}
+
+#define MCLK_SETUP_DATA_OUTCLK(id) { \
+	MCLK_TYPE_OUTCLK, 0, \
+	"out" #id "-mux0", \
+	"out" #id "-en0", \
+	"out" #id "_mclk_div", \
+	{ "out" #id "_mclk_div", "dummy", }, \
+	"out" #id "_clk", \
+}
+
+static struct mclk_setup_data mclk_psc_data[] = {
+	MCLK_SETUP_DATA_PSC(0),
+	MCLK_SETUP_DATA_PSC(1),
+	MCLK_SETUP_DATA_PSC(2),
+	MCLK_SETUP_DATA_PSC(3),
+	MCLK_SETUP_DATA_PSC(4),
+	MCLK_SETUP_DATA_PSC(5),
+	MCLK_SETUP_DATA_PSC(6),
+	MCLK_SETUP_DATA_PSC(7),
+	MCLK_SETUP_DATA_PSC(8),
+	MCLK_SETUP_DATA_PSC(9),
+	MCLK_SETUP_DATA_PSC(10),
+	MCLK_SETUP_DATA_PSC(11),
+};
+
+static struct mclk_setup_data mclk_mscan_data[] = {
+	MCLK_SETUP_DATA_MSCAN(0),
+	MCLK_SETUP_DATA_MSCAN(1),
+	MCLK_SETUP_DATA_MSCAN(2),
+	MCLK_SETUP_DATA_MSCAN(3),
+};
+
+static struct mclk_setup_data mclk_spdif_data[] = {
+	MCLK_SETUP_DATA_SPDIF,
+};
+
+static struct mclk_setup_data mclk_outclk_data[] = {
+	MCLK_SETUP_DATA_OUTCLK(0),
+	MCLK_SETUP_DATA_OUTCLK(1),
+	MCLK_SETUP_DATA_OUTCLK(2),
+	MCLK_SETUP_DATA_OUTCLK(3),
+};
+
+/* setup the MCLK clock subtree of an individual PSC/MSCAN/SPDIF */
+static void mpc512x_clk_setup_mclk(struct mclk_setup_data *entry, size_t idx)
+{
+	size_t clks_idx_pub, clks_idx_int;
+	u32 __iomem *mccr_reg;	/* MCLK control register (mux, en, div) */
+	int div;
+
+	/* derive a few parameters from the component type and index */
+	switch (entry->type) {
+	case MCLK_TYPE_PSC:
+		clks_idx_pub = MPC512x_CLK_PSC0_MCLK + idx;
+		clks_idx_int = MPC512x_CLK_MCLKS_FIRST
+			     + (idx) * MCLK_MAX_IDX;
+		mccr_reg = &clkregs->psc_ccr[idx];
+		break;
+	case MCLK_TYPE_MSCAN:
+		clks_idx_pub = MPC512x_CLK_MSCAN0_MCLK + idx;
+		clks_idx_int = MPC512x_CLK_MCLKS_FIRST
+			     + (NR_PSCS + idx) * MCLK_MAX_IDX;
+		mccr_reg = &clkregs->mscan_ccr[idx];
+		break;
+	case MCLK_TYPE_SPDIF:
+		clks_idx_pub = MPC512x_CLK_SPDIF_MCLK;
+		clks_idx_int = MPC512x_CLK_MCLKS_FIRST
+			     + (NR_PSCS + NR_MSCANS) * MCLK_MAX_IDX;
+		mccr_reg = &clkregs->spccr;
+		break;
+	case MCLK_TYPE_OUTCLK:
+		clks_idx_pub = MPC512x_CLK_OUT0_CLK + idx;
+		clks_idx_int = MPC512x_CLK_MCLKS_FIRST
+			     + (NR_PSCS + NR_MSCANS + NR_SPDIFS + idx)
+			     * MCLK_MAX_IDX;
+		mccr_reg = &clkregs->out_ccr[idx];
+		break;
+	default:
+		return;
+	}
+
+	/*
+	 * this was grabbed from the PPC_CLOCK implementation, which
+	 * enforced a specific MCLK divider while the clock was gated
+	 * during setup (that's a documented hardware requirement)
+	 *
+	 * the PPC_CLOCK implementation might even have violated the
+	 * "MCLK <= IPS" constraint, the fixed divider value of 1
+	 * results in a divider of 2 and thus MCLK = SYS/2 which equals
+	 * CSB which is greater than IPS; the serial port setup may have
+	 * adjusted the divider which the clock setup might have left in
+	 * an undesirable state
+	 *
+	 * initial setup is:
+	 * - MCLK 0 from SYS
+	 * - MCLK DIV such to not exceed the IPS clock
+	 * - MCLK 0 enabled
+	 * - MCLK 1 from MCLK DIV
+	 */
+	div = clk_get_rate(clks[MPC512x_CLK_SYS]);
+	div /= clk_get_rate(clks[MPC512x_CLK_IPS]);
+	out_be32(mccr_reg, (0 << 16));
+	out_be32(mccr_reg, (0 << 16) | ((div - 1) << 17));
+	out_be32(mccr_reg, (1 << 16) | ((div - 1) << 17));
+
+	/*
+	 * create the 'struct clk' items of the MCLK's clock subtree
+	 *
+	 * note that by design we always create all nodes and won't take
+	 * shortcuts here, because
+	 * - the "internal" MCLK_DIV and MCLK_OUT signal in turn are
+	 *   selectable inputs to the CFM while those who "actually use"
+	 *   the PSC/MSCAN/SPDIF (serial drivers et al) need the MCLK
+	 *   for their bitrate
+	 * - in the absence of "aliases" for clocks we need to create
+	 *   individial 'struct clk' items for whatever might get
+	 *   referenced or looked up, even if several of those items are
+	 *   identical from the logical POV (their rate value)
+	 * - for easier future maintenance and for better reflection of
+	 *   the SoC's documentation, it appears appropriate to generate
+	 *   clock items even for those muxers which actually are NOPs
+	 *   (those with two inputs of which one is reserved)
+	 */
+	clks[clks_idx_int + MCLK_IDX_MUX0] = mpc512x_clk_muxed(
+			entry->name_mux0,
+			soc_has_mclk_mux0_canin()
+				? &parent_names_mux0_canin[0]
+				: &parent_names_mux0_spdif[0],
+			ARRAY_SIZE(parent_names_mux0_spdif),
+			mccr_reg, 14, 2);
+	clks[clks_idx_int + MCLK_IDX_EN0] = mpc512x_clk_gated(
+			entry->name_en0, entry->name_mux0,
+			mccr_reg, 16);
+	clks[clks_idx_int + MCLK_IDX_DIV0] = mpc512x_clk_divider(
+			entry->name_div0,
+			entry->name_en0, CLK_SET_RATE_GATE,
+			mccr_reg, 17, 15, 0);
+	if (entry->has_mclk1) {
+		clks[clks_idx_pub] = mpc512x_clk_muxed(
+				entry->name_mclk,
+				&entry->parent_names_mux1[0],
+				ARRAY_SIZE(entry->parent_names_mux1),
+				mccr_reg, 7, 1);
+	} else {
+		clks[clks_idx_pub] = mpc512x_clk_factor(
+				entry->name_mclk,
+				entry->parent_names_mux1[0],
+				1, 1);
+	}
+}
+
+/* }}} MCLK helpers */
+
+static void mpc512x_clk_setup_clock_tree(struct device_node *np, int busfreq)
+{
+	int sys_mul, sys_div, ips_div;
+	int mul, div;
+	size_t mclk_idx;
+	int freq;
+
+	/*
+	 * developer's notes:
+	 * - consider whether to handle clocks which have both gates and
+	 *   dividers via intermediates or by means of composites
+	 * - fractional dividers appear to not map well to composites
+	 *   since they can be seen as a fixed multiplier and an
+	 *   adjustable divider, while composites can only combine at
+	 *   most one of a mux, div, and gate each into one 'struct clk'
+	 *   item
+	 * - PSC/MSCAN/SPDIF clock generation OTOH already is very
+	 *   specific and cannot get mapped to componsites (at least not
+	 *   a single one, maybe two of them, but then some of these
+	 *   intermediate clock signals get referenced elsewhere (e.g.
+	 *   in the clock frequency measurement, CFM) and thus need
+	 *   publicly available names
+	 * - the current source layout appropriately reflects the
+	 *   hardware setup, and it works, so it's questionable whether
+	 *   further changes will result in big enough a benefit
+	 */
+
+	/* regardless of whether XTAL/OSC exists, have REF created */
+	mpc512x_clk_setup_ref_clock(np, busfreq, &sys_mul, &sys_div, &ips_div);
+
+	/* now setup the REF -> SYS -> CSB -> IPS hierarchy */
+	clks[MPC512x_CLK_SYS] = mpc512x_clk_factor("sys", "ref",
+						   sys_mul, sys_div);
+	clks[MPC512x_CLK_CSB] = mpc512x_clk_factor("csb", "sys", 1, 2);
+	clks[MPC512x_CLK_IPS] = mpc512x_clk_divtable("ips", "csb",
+						     &clkregs->scfr1, 23, 3,
+						     divtab_2346);
+	/* now setup anything below SYS and CSB and IPS */
+
+	clks[MPC512x_CLK_DDR_UG] = mpc512x_clk_factor("ddr-ug", "sys", 1, 2);
+
+	/*
+	 * the Reference Manual discusses that for SDHC only even divide
+	 * ratios are supported because clock domain synchronization
+	 * between 'per' and 'ipg' is broken;
+	 * keep the divider's bit 0 cleared (per reset value), and only
+	 * allow to setup the divider's bits 7:1, which results in that
+	 * only even divide ratios can get configured upon rate changes;
+	 * keep the "x4" name because this bit shift hack is an internal
+	 * implementation detail, the "fractional divider with quarters"
+	 * semantics remains
+	 */
+	clks[MPC512x_CLK_SDHC_x4] = mpc512x_clk_factor("sdhc-x4", "csb", 2, 1);
+	clks[MPC512x_CLK_SDHC_UG] = mpc512x_clk_divider("sdhc-ug", "sdhc-x4", 0,
+							&clkregs->scfr2, 1, 7,
+							CLK_DIVIDER_ONE_BASED);
+	if (soc_has_sdhc2()) {
+		clks[MPC512x_CLK_SDHC2_UG] = mpc512x_clk_divider(
+				"sdhc2-ug", "sdhc-x4", 0, &clkregs->scfr2,
+				9, 7, CLK_DIVIDER_ONE_BASED);
+	}
+
+	clks[MPC512x_CLK_DIU_x4] = mpc512x_clk_factor("diu-x4", "csb", 4, 1);
+	clks[MPC512x_CLK_DIU_UG] = mpc512x_clk_divider("diu-ug", "diu-x4", 0,
+						       &clkregs->scfr1, 0, 8,
+						       CLK_DIVIDER_ONE_BASED);
+
+	/*
+	 * the "power architecture PLL" was setup from data which was
+	 * sampled from the reset config word, at this point in time the
+	 * configuration can be considered fixed and read only (i.e. no
+	 * longer adjustable, or no longer in need of adjustment), which
+	 * is why we don't register a PLL here but assume fixed factors
+	 */
+	mul = get_cpmf_mult_x2();
+	div = 2;	/* compensate for the fractional factor */
+	clks[MPC512x_CLK_E300] = mpc512x_clk_factor("e300", "csb", mul, div);
+
+	if (soc_has_mbx()) {
+		clks[MPC512x_CLK_MBX_BUS_UG] = mpc512x_clk_factor(
+				"mbx-bus-ug", "csb", 1, 2);
+		clks[MPC512x_CLK_MBX_UG] = mpc512x_clk_divtable(
+				"mbx-ug", "mbx-bus-ug", &clkregs->scfr1,
+				14, 3, divtab_1234);
+		clks[MPC512x_CLK_MBX_3D_UG] = mpc512x_clk_factor(
+				"mbx-3d-ug", "mbx-ug", 1, 1);
+	}
+	if (soc_has_pci()) {
+		clks[MPC512x_CLK_PCI_UG] = mpc512x_clk_divtable(
+				"pci-ug", "csb", &clkregs->scfr1,
+				20, 3, divtab_2346);
+	}
+	if (soc_has_nfc_5125()) {
+		/*
+		 * XXX TODO implement 5125 NFC clock setup logic,
+		 * with high/low period counters in clkregs->scfr3,
+		 * currently there are no users so it's ENOIMPL
+		 */
+		clks[MPC512x_CLK_NFC_UG] = ERR_PTR(-ENOTSUPP);
+	} else {
+		clks[MPC512x_CLK_NFC_UG] = mpc512x_clk_divtable(
+				"nfc-ug", "ips", &clkregs->scfr1,
+				8, 3, divtab_1234);
+	}
+	clks[MPC512x_CLK_LPC_UG] = mpc512x_clk_divtable("lpc-ug", "ips",
+							&clkregs->scfr1, 11, 3,
+							divtab_1234);
+
+	clks[MPC512x_CLK_LPC] = mpc512x_clk_gated("lpc", "lpc-ug",
+						  &clkregs->sccr1, 30);
+	clks[MPC512x_CLK_NFC] = mpc512x_clk_gated("nfc", "nfc-ug",
+						  &clkregs->sccr1, 29);
+	if (soc_has_pata()) {
+		clks[MPC512x_CLK_PATA] = mpc512x_clk_gated(
+				"pata", "ips", &clkregs->sccr1, 28);
+	}
+	/* for PSCs there is a "registers" gate and a bitrate MCLK subtree */
+	for (mclk_idx = 0; mclk_idx < soc_max_pscnum(); mclk_idx++) {
+		char name[12];
+		snprintf(name, sizeof(name), "psc%d", mclk_idx);
+		clks[MPC512x_CLK_PSC0 + mclk_idx] = mpc512x_clk_gated(
+				name, "ips", &clkregs->sccr1, 27 - mclk_idx);
+		mpc512x_clk_setup_mclk(&mclk_psc_data[mclk_idx], mclk_idx);
+	}
+	clks[MPC512x_CLK_PSC_FIFO] = mpc512x_clk_gated("psc-fifo", "ips",
+						       &clkregs->sccr1, 15);
+	if (soc_has_sata()) {
+		clks[MPC512x_CLK_SATA] = mpc512x_clk_gated(
+				"sata", "ips", &clkregs->sccr1, 14);
+	}
+	clks[MPC512x_CLK_FEC] = mpc512x_clk_gated("fec", "ips",
+						  &clkregs->sccr1, 13);
+	if (soc_has_pci()) {
+		clks[MPC512x_CLK_PCI] = mpc512x_clk_gated(
+				"pci", "pci-ug", &clkregs->sccr1, 11);
+	}
+	clks[MPC512x_CLK_DDR] = mpc512x_clk_gated("ddr", "ddr-ug",
+						  &clkregs->sccr1, 10);
+	if (soc_has_fec2()) {
+		clks[MPC512x_CLK_FEC2] = mpc512x_clk_gated(
+				"fec2", "ips", &clkregs->sccr1, 9);
+	}
+
+	clks[MPC512x_CLK_DIU] = mpc512x_clk_gated("diu", "diu-ug",
+						  &clkregs->sccr2, 31);
+	if (soc_has_axe()) {
+		clks[MPC512x_CLK_AXE] = mpc512x_clk_gated(
+				"axe", "csb", &clkregs->sccr2, 30);
+	}
+	clks[MPC512x_CLK_MEM] = mpc512x_clk_gated("mem", "ips",
+						  &clkregs->sccr2, 29);
+	clks[MPC512x_CLK_USB1] = mpc512x_clk_gated("usb1", "csb",
+						   &clkregs->sccr2, 28);
+	clks[MPC512x_CLK_USB2] = mpc512x_clk_gated("usb2", "csb",
+						   &clkregs->sccr2, 27);
+	clks[MPC512x_CLK_I2C] = mpc512x_clk_gated("i2c", "ips",
+						  &clkregs->sccr2, 26);
+	/* MSCAN differs from PSC with just one gate for multiple components */
+	clks[MPC512x_CLK_BDLC] = mpc512x_clk_gated("bdlc", "ips",
+						   &clkregs->sccr2, 25);
+	for (mclk_idx = 0; mclk_idx < ARRAY_SIZE(mclk_mscan_data); mclk_idx++)
+		mpc512x_clk_setup_mclk(&mclk_mscan_data[mclk_idx], mclk_idx);
+	clks[MPC512x_CLK_SDHC] = mpc512x_clk_gated("sdhc", "sdhc-ug",
+						   &clkregs->sccr2, 24);
+	/* there is only one SPDIF component, which shares MCLK support code */
+	if (soc_has_spdif()) {
+		clks[MPC512x_CLK_SPDIF] = mpc512x_clk_gated(
+				"spdif", "ips", &clkregs->sccr2, 23);
+		mpc512x_clk_setup_mclk(&mclk_spdif_data[0], 0);
+	}
+	if (soc_has_mbx()) {
+		clks[MPC512x_CLK_MBX_BUS] = mpc512x_clk_gated(
+				"mbx-bus", "mbx-bus-ug", &clkregs->sccr2, 22);
+		clks[MPC512x_CLK_MBX] = mpc512x_clk_gated(
+				"mbx", "mbx-ug", &clkregs->sccr2, 21);
+		clks[MPC512x_CLK_MBX_3D] = mpc512x_clk_gated(
+				"mbx-3d", "mbx-3d-ug", &clkregs->sccr2, 20);
+	}
+	clks[MPC512x_CLK_IIM] = mpc512x_clk_gated("iim", "csb",
+						  &clkregs->sccr2, 19);
+	if (soc_has_viu()) {
+		clks[MPC512x_CLK_VIU] = mpc512x_clk_gated(
+				"viu", "csb", &clkregs->sccr2, 18);
+	}
+	if (soc_has_sdhc2()) {
+		clks[MPC512x_CLK_SDHC2] = mpc512x_clk_gated(
+				"sdhc-2", "sdhc2-ug", &clkregs->sccr2, 17);
+	}
+
+	if (soc_has_outclk()) {
+		size_t idx;	/* used as mclk_idx, just to trim line length */
+		for (idx = 0; idx < ARRAY_SIZE(mclk_outclk_data); idx++)
+			mpc512x_clk_setup_mclk(&mclk_outclk_data[idx], idx);
+	}
+
+	/*
+	 * externally provided clocks (when implemented in hardware,
+	 * device tree may specify values which otherwise were unknown)
+	 */
+	freq = get_freq_from_dt("psc_mclk_in");
+	if (!freq)
+		freq = 25000000;
+	clks[MPC512x_CLK_PSC_MCLK_IN] = mpc512x_clk_fixed("psc_mclk_in", freq);
+	if (soc_has_mclk_mux0_canin()) {
+		freq = get_freq_from_dt("can_clk_in");
+		clks[MPC512x_CLK_CAN_CLK_IN] = mpc512x_clk_fixed(
+				"can_clk_in", freq);
+	} else {
+		freq = get_freq_from_dt("spdif_tx_in");
+		clks[MPC512x_CLK_SPDIF_TX_IN] = mpc512x_clk_fixed(
+				"spdif_tx_in", freq);
+		freq = get_freq_from_dt("spdif_rx_in");
+		clks[MPC512x_CLK_SPDIF_TX_IN] = mpc512x_clk_fixed(
+				"spdif_rx_in", freq);
+	}
+
+	/* fixed frequency for AC97, always 24.567MHz */
+	clks[MPC512x_CLK_AC97] = mpc512x_clk_fixed("ac97", 24567000);
+
+	/*
+	 * pre-enable those "internal" clock items which never get
+	 * claimed by any peripheral driver, to not have the clock
+	 * subsystem disable them late at startup
+	 */
+	clk_prepare_enable(clks[MPC512x_CLK_DUMMY]);
+	clk_prepare_enable(clks[MPC512x_CLK_E300]);	/* PowerPC CPU */
+	clk_prepare_enable(clks[MPC512x_CLK_DDR]);	/* DRAM */
+	clk_prepare_enable(clks[MPC512x_CLK_MEM]);	/* SRAM */
+	clk_prepare_enable(clks[MPC512x_CLK_IPS]);	/* SoC periph */
+	clk_prepare_enable(clks[MPC512x_CLK_LPC]);	/* boot media */
+}
+
+/*
+ * registers the set of public clocks (those listed in the dt-bindings/
+ * header file) for OF lookups, keeps the intermediates private to us
+ */
+static void mpc5121_clk_register_of_provider(struct device_node *np)
+{
+	clk_data.clks = clks;
+	clk_data.clk_num = MPC512x_CLK_LAST_PUBLIC + 1;	/* _not_ ARRAY_SIZE() */
+	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+}
+
+/*
+ * temporary support for the period of time between introduction of CCF
+ * support and the adjustment of peripheral drivers to OF based lookups
+ */
+static void mpc5121_clk_provide_migration_support(void)
+{
+
+	/*
+	 * pre-enable those clock items which are not yet appropriately
+	 * acquired by their peripheral driver
+	 *
+	 * the PCI clock cannot get acquired by its peripheral driver,
+	 * because for this platform the driver won't probe(), instead
+	 * initialization is done from within the .setup_arch() routine
+	 * at a point in time where the clock provider has not been
+	 * setup yet and thus isn't available yet
+	 *
+	 * so we "pre-enable" the clock here, to not have the clock
+	 * subsystem automatically disable this item in a late init call
+	 *
+	 * this PCI clock pre-enable workaround only applies when there
+	 * are device tree nodes for PCI and thus the peripheral driver
+	 * has attached to bridges, otherwise the PCI clock remains
+	 * unused and so it gets disabled
+	 */
+	clk_prepare_enable(clks[MPC512x_CLK_PSC3_MCLK]);/* serial console */
+	if (of_find_compatible_node(NULL, "pci", "fsl,mpc5121-pci"))
+		clk_prepare_enable(clks[MPC512x_CLK_PCI]);
+}
+
+/*
+ * those macros are not exactly pretty, but they encapsulate a lot
+ * of copy'n'paste heavy code which is even more ugly, and reduce
+ * the potential for inconsistencies in those many code copies
+ */
+#define FOR_NODES(compatname) \
+	for_each_compatible_node(np, NULL, compatname)
+
+#define NODE_PREP do { \
+	of_address_to_resource(np, 0, &res); \
+	snprintf(devname, sizeof(devname), "%08x.%s", res.start, np->name); \
+} while (0)
+
+#define NODE_CHK(clkname, clkitem, regnode, regflag) do { \
+	struct clk *clk; \
+	clk = of_clk_get_by_name(np, clkname); \
+	if (IS_ERR(clk)) { \
+		clk = clkitem; \
+		clk_register_clkdev(clk, clkname, devname); \
+		if (regnode) \
+			clk_register_clkdev(clk, clkname, np->name); \
+		did_register |= DID_REG_ ## regflag; \
+		pr_debug("clock alias name '%s' for dev '%s' pointer %p\n", \
+			 clkname, devname, clk); \
+	} else { \
+		clk_put(clk); \
+	} \
+} while (0)
+
+/*
+ * register source code provided fallback results for clock lookups,
+ * these get consulted when OF based clock lookup fails (that is in the
+ * case of not yet adjusted device tree data, where clock related specs
+ * are missing)
+ */
+static void mpc5121_clk_provide_backwards_compat(void)
+{
+	enum did_reg_flags {
+		DID_REG_PSC	= BIT(0),
+		DID_REG_PSCFIFO	= BIT(1),
+		DID_REG_NFC	= BIT(2),
+		DID_REG_CAN	= BIT(3),
+		DID_REG_I2C	= BIT(4),
+		DID_REG_DIU	= BIT(5),
+		DID_REG_VIU	= BIT(6),
+		DID_REG_FEC	= BIT(7),
+		DID_REG_USB	= BIT(8),
+		DID_REG_PATA	= BIT(9),
+	};
+
+	int did_register;
+	struct device_node *np;
+	struct resource res;
+	int idx;
+	char devname[32];
+
+	did_register = 0;
+
+	FOR_NODES(mpc512x_select_psc_compat()) {
+		NODE_PREP;
+		idx = (res.start >> 8) & 0xf;
+		NODE_CHK("ipg", clks[MPC512x_CLK_PSC0 + idx], 0, PSC);
+		NODE_CHK("mclk", clks[MPC512x_CLK_PSC0_MCLK + idx], 0, PSC);
+	}
+
+	FOR_NODES("fsl,mpc5121-psc-fifo") {
+		NODE_PREP;
+		NODE_CHK("ipg", clks[MPC512x_CLK_PSC_FIFO], 1, PSCFIFO);
+	}
+
+	FOR_NODES("fsl,mpc5121-nfc") {
+		NODE_PREP;
+		NODE_CHK("ipg", clks[MPC512x_CLK_NFC], 0, NFC);
+	}
+
+	FOR_NODES("fsl,mpc5121-mscan") {
+		NODE_PREP;
+		idx = 0;
+		idx += (res.start & 0x2000) ? 2 : 0;
+		idx += (res.start & 0x0080) ? 1 : 0;
+		NODE_CHK("ipg", clks[MPC512x_CLK_BDLC], 0, CAN);
+		NODE_CHK("mclk", clks[MPC512x_CLK_MSCAN0_MCLK + idx], 0, CAN);
+	}
+
+	/*
+	 * do register the 'ips', 'sys', and 'ref' names globally
+	 * instead of inside each individual CAN node, as there is no
+	 * potential for a name conflict (in contrast to 'ipg' and 'mclk')
+	 */
+	if (did_register & DID_REG_CAN) {
+		clk_register_clkdev(clks[MPC512x_CLK_IPS], "ips", NULL);
+		clk_register_clkdev(clks[MPC512x_CLK_SYS], "sys", NULL);
+		clk_register_clkdev(clks[MPC512x_CLK_REF], "ref", NULL);
+	}
+
+	FOR_NODES("fsl,mpc5121-i2c") {
+		NODE_PREP;
+		NODE_CHK("ipg", clks[MPC512x_CLK_I2C], 0, I2C);
+	}
+
+	/*
+	 * workaround for the fact that the I2C driver does an "anonymous"
+	 * lookup (NULL name spec, which yields the first clock spec) for
+	 * which we cannot register an alias -- a _global_ 'ipg' alias that
+	 * is not bound to any device name and returns the I2C clock item
+	 * is not a good idea
+	 *
+	 * so we have the lookup in the peripheral driver fail, which is
+	 * silent and non-fatal, and pre-enable the clock item here such
+	 * that register access is possible
+	 *
+	 * see commit b3bfce2b "i2c: mpc: cleanup clock API use" for
+	 * details, adjusting s/NULL/"ipg"/ in i2c-mpc.c would make this
+	 * workaround obsolete
+	 */
+	if (did_register & DID_REG_I2C)
+		clk_prepare_enable(clks[MPC512x_CLK_I2C]);
+
+	FOR_NODES("fsl,mpc5121-diu") {
+		NODE_PREP;
+		NODE_CHK("ipg", clks[MPC512x_CLK_DIU], 1, DIU);
+	}
+
+	FOR_NODES("fsl,mpc5121-viu") {
+		NODE_PREP;
+		NODE_CHK("ipg", clks[MPC512x_CLK_VIU], 0, VIU);
+	}
+
+	/*
+	 * note that 2771399a "fs_enet: cleanup clock API use" did use the
+	 * "per" string for the clock lookup in contrast to the "ipg" name
+	 * which most other nodes are using -- this is not a fatal thing
+	 * but just something to keep in mind when doing compatibility
+	 * registration, it's a non-issue with up-to-date device tree data
+	 */
+	FOR_NODES("fsl,mpc5121-fec") {
+		NODE_PREP;
+		NODE_CHK("per", clks[MPC512x_CLK_FEC], 0, FEC);
+	}
+	FOR_NODES("fsl,mpc5121-fec-mdio") {
+		NODE_PREP;
+		NODE_CHK("per", clks[MPC512x_CLK_FEC], 0, FEC);
+	}
+	/*
+	 * MPC5125 has two FECs: FEC1 at 0x2800, FEC2 at 0x4800;
+	 * the clock items don't "form an array" since FEC2 was
+	 * added only later and was not allowed to shift all other
+	 * clock item indices, so the numbers aren't adjacent
+	 */
+	FOR_NODES("fsl,mpc5125-fec") {
+		NODE_PREP;
+		if (res.start & 0x4000)
+			idx = MPC512x_CLK_FEC2;
+		else
+			idx = MPC512x_CLK_FEC;
+		NODE_CHK("per", clks[idx], 0, FEC);
+	}
+
+	FOR_NODES("fsl,mpc5121-usb2-dr") {
+		NODE_PREP;
+		idx = (res.start & 0x4000) ? 1 : 0;
+		NODE_CHK("ipg", clks[MPC512x_CLK_USB1 + idx], 0, USB);
+	}
+
+	FOR_NODES("fsl,mpc5121-pata") {
+		NODE_PREP;
+		NODE_CHK("ipg", clks[MPC512x_CLK_PATA], 0, PATA);
+	}
+
+	/*
+	 * try to collapse diagnostics into a single line of output yet
+	 * provide a full list of what is missing, to avoid noise in the
+	 * absence of up-to-date device tree data -- backwards
+	 * compatibility to old DTBs is a requirement, updates may be
+	 * desirable or preferrable but are not at all mandatory
+	 */
+	if (did_register) {
+		pr_notice("device tree lacks clock specs, adding fallbacks (0x%x,%s%s%s%s%s%s%s%s%s%s)\n",
+			  did_register,
+			  (did_register & DID_REG_PSC) ? " PSC" : "",
+			  (did_register & DID_REG_PSCFIFO) ? " PSCFIFO" : "",
+			  (did_register & DID_REG_NFC) ? " NFC" : "",
+			  (did_register & DID_REG_CAN) ? " CAN" : "",
+			  (did_register & DID_REG_I2C) ? " I2C" : "",
+			  (did_register & DID_REG_DIU) ? " DIU" : "",
+			  (did_register & DID_REG_VIU) ? " VIU" : "",
+			  (did_register & DID_REG_FEC) ? " FEC" : "",
+			  (did_register & DID_REG_USB) ? " USB" : "",
+			  (did_register & DID_REG_PATA) ? " PATA" : "");
+	} else {
+		pr_debug("device tree has clock specs, no fallbacks added\n");
+	}
+}
+
+int __init mpc5121_clk_init(void)
+{
+	struct device_node *clk_np;
+	int busfreq;
+
+	/* map the clock control registers */
+	clk_np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-clock");
+	if (!clk_np)
+		return -ENODEV;
+	clkregs = of_iomap(clk_np, 0);
+	WARN_ON(!clkregs);
+
+	/* determine the SoC variant we run on */
+	mpc512x_clk_determine_soc();
+
+	/* invalidate all not yet registered clock slots */
+	mpc512x_clk_preset_data();
+
+	/*
+	 * have the device tree scanned for "fixed-clock" nodes (which
+	 * includes the oscillator node if the board's DT provides one)
+	 */
+	of_clk_init(NULL);
+
+	/*
+	 * add a dummy clock for those situations where a clock spec is
+	 * required yet no real clock is involved
+	 */
+	clks[MPC512x_CLK_DUMMY] = mpc512x_clk_fixed("dummy", 0);
+
+	/*
+	 * have all the real nodes in the clock tree populated from REF
+	 * down to all leaves, either starting from the OSC node or from
+	 * a REF root that was created from the IPS bus clock input
+	 */
+	busfreq = get_freq_from_dt("bus-frequency");
+	mpc512x_clk_setup_clock_tree(clk_np, busfreq);
+
+	/* register as an OF clock provider */
+	mpc5121_clk_register_of_provider(clk_np);
+
+	/*
+	 * unbreak not yet adjusted peripheral drivers during migration
+	 * towards fully operational common clock support, and allow
+	 * operation in the absence of clock related device tree specs
+	 */
+	mpc5121_clk_provide_migration_support();
+	mpc5121_clk_provide_backwards_compat();
+
+	return 0;
+}
diff --git a/arch/powerpc/platforms/512x/clock.c b/arch/powerpc/platforms/512x/clock.c
deleted file mode 100644
index fd8a376..0000000
--- a/arch/powerpc/platforms/512x/clock.c
+++ /dev/null
@@ -1,754 +0,0 @@
-/*
- * Copyright (C) 2007,2008 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Author: John Rigby <jrigby@freescale.com>
- *
- * Implements the clk api defined in include/linux/clk.h
- *
- *    Original based on linux/arch/arm/mach-integrator/clock.c
- *
- *    Copyright (C) 2004 ARM Limited.
- *    Written by Deep Blue Solutions Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/io.h>
-
-#include <linux/of_address.h>
-#include <linux/of_platform.h>
-#include <asm/mpc5xxx.h>
-#include <asm/mpc5121.h>
-#include <asm/clk_interface.h>
-
-#include "mpc512x.h"
-
-#undef CLK_DEBUG
-
-static int clocks_initialized;
-
-#define CLK_HAS_RATE	0x1	/* has rate in MHz */
-#define CLK_HAS_CTRL	0x2	/* has control reg and bit */
-
-struct clk {
-	struct list_head node;
-	char name[32];
-	int flags;
-	struct device *dev;
-	unsigned long rate;
-	struct module *owner;
-	void (*calc) (struct clk *);
-	struct clk *parent;
-	int reg, bit;		/* CLK_HAS_CTRL */
-	int div_shift;		/* only used by generic_div_clk_calc */
-};
-
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
-
-static struct clk *mpc5121_clk_get(struct device *dev, const char *id)
-{
-	struct clk *p, *clk = ERR_PTR(-ENOENT);
-	int dev_match;
-	int id_match;
-
-	if (dev == NULL || id == NULL)
-		return clk;
-
-	mutex_lock(&clocks_mutex);
-	list_for_each_entry(p, &clocks, node) {
-		dev_match = id_match = 0;
-
-		if (dev == p->dev)
-			dev_match++;
-		if (strcmp(id, p->name) == 0)
-			id_match++;
-		if ((dev_match || id_match) && try_module_get(p->owner)) {
-			clk = p;
-			break;
-		}
-	}
-	mutex_unlock(&clocks_mutex);
-
-	return clk;
-}
-
-#ifdef CLK_DEBUG
-static void dump_clocks(void)
-{
-	struct clk *p;
-
-	mutex_lock(&clocks_mutex);
-	printk(KERN_INFO "CLOCKS:\n");
-	list_for_each_entry(p, &clocks, node) {
-		pr_info("  %s=%ld", p->name, p->rate);
-		if (p->parent)
-			pr_cont(" %s=%ld", p->parent->name,
-			       p->parent->rate);
-		if (p->flags & CLK_HAS_CTRL)
-			pr_cont(" reg/bit=%d/%d", p->reg, p->bit);
-		pr_cont("\n");
-	}
-	mutex_unlock(&clocks_mutex);
-}
-#define	DEBUG_CLK_DUMP() dump_clocks()
-#else
-#define	DEBUG_CLK_DUMP()
-#endif
-
-
-static void mpc5121_clk_put(struct clk *clk)
-{
-	module_put(clk->owner);
-}
-
-#define NRPSC 12
-
-struct mpc512x_clockctl {
-	u32 spmr;		/* System PLL Mode Reg */
-	u32 sccr[2];		/* System Clk Ctrl Reg 1 & 2 */
-	u32 scfr1;		/* System Clk Freq Reg 1 */
-	u32 scfr2;		/* System Clk Freq Reg 2 */
-	u32 reserved;
-	u32 bcr;		/* Bread Crumb Reg */
-	u32 pccr[NRPSC];	/* PSC Clk Ctrl Reg 0-11 */
-	u32 spccr;		/* SPDIF Clk Ctrl Reg */
-	u32 cccr;		/* CFM Clk Ctrl Reg */
-	u32 dccr;		/* DIU Clk Cnfg Reg */
-};
-
-static struct mpc512x_clockctl __iomem *clockctl;
-
-static int mpc5121_clk_enable(struct clk *clk)
-{
-	unsigned int mask;
-
-	if (clk->flags & CLK_HAS_CTRL) {
-		mask = in_be32(&clockctl->sccr[clk->reg]);
-		mask |= 1 << clk->bit;
-		out_be32(&clockctl->sccr[clk->reg], mask);
-	}
-	return 0;
-}
-
-static void mpc5121_clk_disable(struct clk *clk)
-{
-	unsigned int mask;
-
-	if (clk->flags & CLK_HAS_CTRL) {
-		mask = in_be32(&clockctl->sccr[clk->reg]);
-		mask &= ~(1 << clk->bit);
-		out_be32(&clockctl->sccr[clk->reg], mask);
-	}
-}
-
-static unsigned long mpc5121_clk_get_rate(struct clk *clk)
-{
-	if (clk->flags & CLK_HAS_RATE)
-		return clk->rate;
-	else
-		return 0;
-}
-
-static long mpc5121_clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	return rate;
-}
-
-static int mpc5121_clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	return 0;
-}
-
-static int clk_register(struct clk *clk)
-{
-	mutex_lock(&clocks_mutex);
-	list_add(&clk->node, &clocks);
-	mutex_unlock(&clocks_mutex);
-	return 0;
-}
-
-static unsigned long spmf_mult(void)
-{
-	/*
-	 * Convert spmf to multiplier
-	 */
-	static int spmf_to_mult[] = {
-		68, 1, 12, 16,
-		20, 24, 28, 32,
-		36, 40, 44, 48,
-		52, 56, 60, 64
-	};
-	int spmf = (in_be32(&clockctl->spmr) >> 24) & 0xf;
-	return spmf_to_mult[spmf];
-}
-
-static unsigned long sysdiv_div_x_2(void)
-{
-	/*
-	 * Convert sysdiv to divisor x 2
-	 * Some divisors have fractional parts so
-	 * multiply by 2 then divide by this value
-	 */
-	static int sysdiv_to_div_x_2[] = {
-		4, 5, 6, 7,
-		8, 9, 10, 14,
-		12, 16, 18, 22,
-		20, 24, 26, 30,
-		28, 32, 34, 38,
-		36, 40, 42, 46,
-		44, 48, 50, 54,
-		52, 56, 58, 62,
-		60, 64, 66,
-	};
-	int sysdiv = (in_be32(&clockctl->scfr2) >> 26) & 0x3f;
-	return sysdiv_to_div_x_2[sysdiv];
-}
-
-static unsigned long ref_to_sys(unsigned long rate)
-{
-	rate *= spmf_mult();
-	rate *= 2;
-	rate /= sysdiv_div_x_2();
-
-	return rate;
-}
-
-static unsigned long sys_to_ref(unsigned long rate)
-{
-	rate *= sysdiv_div_x_2();
-	rate /= 2;
-	rate /= spmf_mult();
-
-	return rate;
-}
-
-static long ips_to_ref(unsigned long rate)
-{
-	int ips_div = (in_be32(&clockctl->scfr1) >> 23) & 0x7;
-
-	rate *= ips_div;	/* csb_clk = ips_clk * ips_div */
-	rate *= 2;		/* sys_clk = csb_clk * 2 */
-	return sys_to_ref(rate);
-}
-
-static unsigned long devtree_getfreq(char *clockname)
-{
-	struct device_node *np;
-	const unsigned int *prop;
-	unsigned int val = 0;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-immr");
-	if (np) {
-		prop = of_get_property(np, clockname, NULL);
-		if (prop)
-			val = *prop;
-	    of_node_put(np);
-	}
-	return val;
-}
-
-static void ref_clk_calc(struct clk *clk)
-{
-	unsigned long rate;
-
-	rate = devtree_getfreq("bus-frequency");
-	if (rate == 0) {
-		printk(KERN_ERR "No bus-frequency in dev tree\n");
-		clk->rate = 0;
-		return;
-	}
-	clk->rate = ips_to_ref(rate);
-}
-
-static struct clk ref_clk = {
-	.name = "ref_clk",
-	.calc = ref_clk_calc,
-};
-
-
-static void sys_clk_calc(struct clk *clk)
-{
-	clk->rate = ref_to_sys(ref_clk.rate);
-}
-
-static struct clk sys_clk = {
-	.name = "sys_clk",
-	.calc = sys_clk_calc,
-};
-
-static void diu_clk_calc(struct clk *clk)
-{
-	int diudiv_x_2 = in_be32(&clockctl->scfr1) & 0xff;
-	unsigned long rate;
-
-	rate = sys_clk.rate;
-
-	rate *= 2;
-	rate /= diudiv_x_2;
-
-	clk->rate = rate;
-}
-
-static void viu_clk_calc(struct clk *clk)
-{
-	unsigned long rate;
-
-	rate = sys_clk.rate;
-	rate /= 2;
-	clk->rate = rate;
-}
-
-static void half_clk_calc(struct clk *clk)
-{
-	clk->rate = clk->parent->rate / 2;
-}
-
-static void generic_div_clk_calc(struct clk *clk)
-{
-	int div = (in_be32(&clockctl->scfr1) >> clk->div_shift) & 0x7;
-
-	clk->rate = clk->parent->rate / div;
-}
-
-static void unity_clk_calc(struct clk *clk)
-{
-	clk->rate = clk->parent->rate;
-}
-
-static struct clk csb_clk = {
-	.name = "csb_clk",
-	.calc = half_clk_calc,
-	.parent = &sys_clk,
-};
-
-static void e300_clk_calc(struct clk *clk)
-{
-	int spmf = (in_be32(&clockctl->spmr) >> 16) & 0xf;
-	int ratex2 = clk->parent->rate * spmf;
-
-	clk->rate = ratex2 / 2;
-}
-
-static struct clk e300_clk = {
-	.name = "e300_clk",
-	.calc = e300_clk_calc,
-	.parent = &csb_clk,
-};
-
-static struct clk ips_clk = {
-	.name = "ips_clk",
-	.calc = generic_div_clk_calc,
-	.parent = &csb_clk,
-	.div_shift = 23,
-};
-
-/*
- * Clocks controlled by SCCR1 (.reg = 0)
- */
-static struct clk lpc_clk = {
-	.name = "lpc_clk",
-	.flags = CLK_HAS_CTRL,
-	.reg = 0,
-	.bit = 30,
-	.calc = generic_div_clk_calc,
-	.parent = &ips_clk,
-	.div_shift = 11,
-};
-
-static struct clk nfc_clk = {
-	.name = "nfc_clk",
-	.flags = CLK_HAS_CTRL,
-	.reg = 0,
-	.bit = 29,
-	.calc = generic_div_clk_calc,
-	.parent = &ips_clk,
-	.div_shift = 8,
-};
-
-static struct clk pata_clk = {
-	.name = "pata_clk",
-	.flags = CLK_HAS_CTRL,
-	.reg = 0,
-	.bit = 28,
-	.calc = unity_clk_calc,
-	.parent = &ips_clk,
-};
-
-/*
- * PSC clocks (bits 27 - 16)
- * are setup elsewhere
- */
-
-static struct clk sata_clk = {
-	.name = "sata_clk",
-	.flags = CLK_HAS_CTRL,
-	.reg = 0,
-	.bit = 14,
-	.calc = unity_clk_calc,
-	.parent = &ips_clk,
-};
-
-static struct clk fec_clk = {
-	.name = "fec_clk",
-	.flags = CLK_HAS_CTRL,
-	.reg = 0,
-	.bit = 13,
-	.calc = unity_clk_calc,
-	.parent = &ips_clk,
-};
-
-static struct clk pci_clk = {
-	.name = "pci_clk",
-	.flags = CLK_HAS_CTRL,
-	.reg = 0,
-	.bit = 11,
-	.calc = generic_div_clk_calc,
-	.parent = &csb_clk,
-	.div_shift = 20,
-};
-
-/*
- * Clocks controlled by SCCR2 (.reg = 1)
- */
-static struct clk diu_clk = {
-	.name = "diu_clk",
-	.flags = CLK_HAS_CTRL,
-	.reg = 1,
-	.bit = 31,
-	.calc = diu_clk_calc,
-};
-
-static struct clk viu_clk = {
-	.name = "viu_clk",
-	.flags = CLK_HAS_CTRL,
-	.reg = 1,
-	.bit = 18,
-	.calc = viu_clk_calc,
-};
-
-static struct clk axe_clk = {
-	.name = "axe_clk",
-	.flags = CLK_HAS_CTRL,
-	.reg = 1,
-	.bit = 30,
-	.calc = unity_clk_calc,
-	.parent = &csb_clk,
-};
-
-static struct clk usb1_clk = {
-	.name = "usb1_clk",
-	.flags = CLK_HAS_CTRL,
-	.reg = 1,
-	.bit = 28,
-	.calc = unity_clk_calc,
-	.parent = &csb_clk,
-};
-
-static struct clk usb2_clk = {
-	.name = "usb2_clk",
-	.flags = CLK_HAS_CTRL,
-	.reg = 1,
-	.bit = 27,
-	.calc = unity_clk_calc,
-	.parent = &csb_clk,
-};
-
-static struct clk i2c_clk = {
-	.name = "i2c_clk",
-	.flags = CLK_HAS_CTRL,
-	.reg = 1,
-	.bit = 26,
-	.calc = unity_clk_calc,
-	.parent = &ips_clk,
-};
-
-static struct clk mscan_clk = {
-	.name = "mscan_clk",
-	.flags = CLK_HAS_CTRL,
-	.reg = 1,
-	.bit = 25,
-	.calc = unity_clk_calc,
-	.parent = &ips_clk,
-};
-
-static struct clk sdhc_clk = {
-	.name = "sdhc_clk",
-	.flags = CLK_HAS_CTRL,
-	.reg = 1,
-	.bit = 24,
-	.calc = unity_clk_calc,
-	.parent = &ips_clk,
-};
-
-static struct clk mbx_bus_clk = {
-	.name = "mbx_bus_clk",
-	.flags = CLK_HAS_CTRL,
-	.reg = 1,
-	.bit = 22,
-	.calc = half_clk_calc,
-	.parent = &csb_clk,
-};
-
-static struct clk mbx_clk = {
-	.name = "mbx_clk",
-	.flags = CLK_HAS_CTRL,
-	.reg = 1,
-	.bit = 21,
-	.calc = unity_clk_calc,
-	.parent = &csb_clk,
-};
-
-static struct clk mbx_3d_clk = {
-	.name = "mbx_3d_clk",
-	.flags = CLK_HAS_CTRL,
-	.reg = 1,
-	.bit = 20,
-	.calc = generic_div_clk_calc,
-	.parent = &mbx_bus_clk,
-	.div_shift = 14,
-};
-
-static void psc_mclk_in_calc(struct clk *clk)
-{
-	clk->rate = devtree_getfreq("psc_mclk_in");
-	if (!clk->rate)
-		clk->rate = 25000000;
-}
-
-static struct clk psc_mclk_in = {
-	.name = "psc_mclk_in",
-	.calc = psc_mclk_in_calc,
-};
-
-static struct clk spdif_txclk = {
-	.name = "spdif_txclk",
-	.flags = CLK_HAS_CTRL,
-	.reg = 1,
-	.bit = 23,
-};
-
-static struct clk spdif_rxclk = {
-	.name = "spdif_rxclk",
-	.flags = CLK_HAS_CTRL,
-	.reg = 1,
-	.bit = 23,
-};
-
-static void ac97_clk_calc(struct clk *clk)
-{
-	/* ac97 bit clock is always 24.567 MHz */
-	clk->rate = 24567000;
-}
-
-static struct clk ac97_clk = {
-	.name = "ac97_clk_in",
-	.calc = ac97_clk_calc,
-};
-
-static struct clk *rate_clks[] = {
-	&ref_clk,
-	&sys_clk,
-	&diu_clk,
-	&viu_clk,
-	&csb_clk,
-	&e300_clk,
-	&ips_clk,
-	&fec_clk,
-	&sata_clk,
-	&pata_clk,
-	&nfc_clk,
-	&lpc_clk,
-	&mbx_bus_clk,
-	&mbx_clk,
-	&mbx_3d_clk,
-	&axe_clk,
-	&usb1_clk,
-	&usb2_clk,
-	&i2c_clk,
-	&mscan_clk,
-	&sdhc_clk,
-	&pci_clk,
-	&psc_mclk_in,
-	&spdif_txclk,
-	&spdif_rxclk,
-	&ac97_clk,
-	NULL
-};
-
-static void rate_clk_init(struct clk *clk)
-{
-	if (clk->calc) {
-		clk->calc(clk);
-		clk->flags |= CLK_HAS_RATE;
-		clk_register(clk);
-	} else {
-		printk(KERN_WARNING
-		       "Could not initialize clk %s without a calc routine\n",
-		       clk->name);
-	}
-}
-
-static void rate_clks_init(void)
-{
-	struct clk **cpp, *clk;
-
-	cpp = rate_clks;
-	while ((clk = *cpp++))
-		rate_clk_init(clk);
-}
-
-/*
- * There are two clk enable registers with 32 enable bits each
- * psc clocks and device clocks are all stored in dev_clks
- */
-static struct clk dev_clks[2][32];
-
-/*
- * Given a psc number return the dev_clk
- * associated with it
- */
-static struct clk *psc_dev_clk(int pscnum)
-{
-	int reg, bit;
-	struct clk *clk;
-
-	reg = 0;
-	bit = 27 - pscnum;
-
-	clk = &dev_clks[reg][bit];
-	clk->reg = 0;
-	clk->bit = bit;
-	return clk;
-}
-
-/*
- * PSC clock rate calculation
- */
-static void psc_calc_rate(struct clk *clk, int pscnum, struct device_node *np)
-{
-	unsigned long mclk_src = sys_clk.rate;
-	unsigned long mclk_div;
-
-	/*
-	 * Can only change value of mclk divider
-	 * when the divider is disabled.
-	 *
-	 * Zero is not a valid divider so minimum
-	 * divider is 1
-	 *
-	 * disable/set divider/enable
-	 */
-	out_be32(&clockctl->pccr[pscnum], 0);
-	out_be32(&clockctl->pccr[pscnum], 0x00020000);
-	out_be32(&clockctl->pccr[pscnum], 0x00030000);
-
-	if (in_be32(&clockctl->pccr[pscnum]) & 0x80) {
-		clk->rate = spdif_rxclk.rate;
-		return;
-	}
-
-	switch ((in_be32(&clockctl->pccr[pscnum]) >> 14) & 0x3) {
-	case 0:
-		mclk_src = sys_clk.rate;
-		break;
-	case 1:
-		mclk_src = ref_clk.rate;
-		break;
-	case 2:
-		mclk_src = psc_mclk_in.rate;
-		break;
-	case 3:
-		mclk_src = spdif_txclk.rate;
-		break;
-	}
-
-	mclk_div = ((in_be32(&clockctl->pccr[pscnum]) >> 17) & 0x7fff) + 1;
-	clk->rate = mclk_src / mclk_div;
-}
-
-/*
- * Find all psc nodes in device tree and assign a clock
- * with name "psc%d_mclk" and dev pointing at the device
- * returned from of_find_device_by_node
- */
-static void psc_clks_init(void)
-{
-	struct device_node *np;
-	struct platform_device *ofdev;
-	u32 reg;
-	const char *psc_compat;
-
-	psc_compat = mpc512x_select_psc_compat();
-	if (!psc_compat)
-		return;
-
-	for_each_compatible_node(np, NULL, psc_compat) {
-		if (!of_property_read_u32(np, "reg", &reg)) {
-			int pscnum = (reg & 0xf00) >> 8;
-			struct clk *clk = psc_dev_clk(pscnum);
-
-			clk->flags = CLK_HAS_RATE | CLK_HAS_CTRL;
-			ofdev = of_find_device_by_node(np);
-			clk->dev = &ofdev->dev;
-			/*
-			 * AC97 is special rate clock does
-			 * not go through normal path
-			 */
-			if (of_device_is_compatible(np, "fsl,mpc5121-psc-ac97"))
-				clk->rate = ac97_clk.rate;
-			else
-				psc_calc_rate(clk, pscnum, np);
-			sprintf(clk->name, "psc%d_mclk", pscnum);
-			clk_register(clk);
-			clk_enable(clk);
-		}
-	}
-}
-
-static struct clk_interface mpc5121_clk_functions = {
-	.clk_get		= mpc5121_clk_get,
-	.clk_enable		= mpc5121_clk_enable,
-	.clk_disable		= mpc5121_clk_disable,
-	.clk_get_rate		= mpc5121_clk_get_rate,
-	.clk_put		= mpc5121_clk_put,
-	.clk_round_rate		= mpc5121_clk_round_rate,
-	.clk_set_rate		= mpc5121_clk_set_rate,
-	.clk_set_parent		= NULL,
-	.clk_get_parent		= NULL,
-};
-
-int __init mpc5121_clk_init(void)
-{
-	struct device_node *np;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-clock");
-	if (np) {
-		clockctl = of_iomap(np, 0);
-		of_node_put(np);
-	}
-
-	if (!clockctl) {
-		printk(KERN_ERR "Could not map clock control registers\n");
-		return 0;
-	}
-
-	rate_clks_init();
-	psc_clks_init();
-
-	/* leave clockctl mapped forever */
-	/*iounmap(clockctl); */
-	DEBUG_CLK_DUMP();
-	clocks_initialized++;
-	clk_functions = mpc5121_clk_functions;
-	return 0;
-}
diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/platforms/512x/mpc512x_shared.c
index 36b5652..adb95f0 100644
--- a/arch/powerpc/platforms/512x/mpc512x_shared.c
+++ b/arch/powerpc/platforms/512x/mpc512x_shared.c
@@ -12,6 +12,7 @@
  * (at your option) any later version.
  */
 
+#include <linux/clk.h>
 #include <linux/kernel.h>
 #include <linux/io.h>
 #include <linux/irq.h>
@@ -68,98 +69,112 @@
 	bool		in_use;
 };
 
-#define DIU_DIV_MASK	0x000000ff
+/* receives a pixel clock spec in pico seconds, adjusts the DIU clock rate */
 static void mpc512x_set_pixel_clock(unsigned int pixclock)
 {
-	unsigned long bestval, bestfreq, speed, busfreq;
-	unsigned long minpixclock, maxpixclock, pixval;
-	struct mpc512x_ccm __iomem *ccm;
 	struct device_node *np;
-	u32 temp;
-	long err;
-	int i;
+	struct clk *clk_diu;
+	unsigned long epsilon, minpixclock, maxpixclock;
+	unsigned long offset, want, got, delta;
 
-	np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-clock");
+	/* lookup and enable the DIU clock */
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-diu");
 	if (!np) {
-		pr_err("Can't find clock control module.\n");
+		pr_err("Could not find DIU device tree node.\n");
 		return;
 	}
-
-	ccm = of_iomap(np, 0);
+	clk_diu = of_clk_get(np, 0);
+	if (IS_ERR(clk_diu)) {
+		/* backwards compat with device trees that lack clock specs */
+		clk_diu = clk_get_sys(np->name, "ipg");
+	}
 	of_node_put(np);
-	if (!ccm) {
-		pr_err("Can't map clock control module reg.\n");
+	if (IS_ERR(clk_diu)) {
+		pr_err("Could not lookup DIU clock.\n");
+		return;
+	}
+	if (clk_prepare_enable(clk_diu)) {
+		pr_err("Could not enable DIU clock.\n");
 		return;
 	}
 
-	np = of_find_node_by_type(NULL, "cpu");
-	if (np) {
-		const unsigned int *prop =
-			of_get_property(np, "bus-frequency", NULL);
+	/*
+	 * convert the picoseconds spec into the desired clock rate,
+	 * determine the acceptable clock range for the monitor (+/- 5%),
+	 * do the calculation in steps to avoid integer overflow
+	 */
+	pr_debug("DIU pixclock in ps - %u\n", pixclock);
+	pixclock = (1000000000 / pixclock) * 1000;
+	pr_debug("DIU pixclock freq  - %u\n", pixclock);
+	epsilon = pixclock / 20; /* pixclock * 0.05 */
+	pr_debug("DIU deviation      - %lu\n", epsilon);
+	minpixclock = pixclock - epsilon;
+	maxpixclock = pixclock + epsilon;
+	pr_debug("DIU minpixclock    - %lu\n", minpixclock);
+	pr_debug("DIU maxpixclock    - %lu\n", maxpixclock);
 
-		of_node_put(np);
-		if (prop) {
-			busfreq = *prop;
-		} else {
-			pr_err("Can't get bus-frequency property\n");
-			return;
-		}
-	} else {
-		pr_err("Can't find 'cpu' node.\n");
+	/*
+	 * check whether the DIU supports the desired pixel clock
+	 *
+	 * - simply request the desired clock and see what the
+	 *   platform's clock driver will make of it, assuming that it
+	 *   will setup the best approximation of the requested value
+	 * - try other candidate frequencies in the order of decreasing
+	 *   preference (i.e. with increasing distance from the desired
+	 *   pixel clock, and checking the lower frequency before the
+	 *   higher frequency to not overload the hardware) until the
+	 *   first match is found -- any potential subsequent match
+	 *   would only be as good as the former match or typically
+	 *   would be less preferrable
+	 *
+	 * the offset increment of pixelclock divided by 64 is an
+	 * arbitrary choice -- it's simple to calculate, in the typical
+	 * case we expect the first check to succeed already, in the
+	 * worst case seven frequencies get tested (the exact center and
+	 * three more values each to the left and to the right) before
+	 * the 5% tolerance window is exceeded, resulting in fast enough
+	 * execution yet high enough probability of finding a suitable
+	 * value, while the error rate will be in the order of single
+	 * percents
+	 */
+	for (offset = 0; offset <= epsilon; offset += pixclock / 64) {
+		want = pixclock - offset;
+		pr_debug("DIU checking clock - %lu\n", want);
+		clk_set_rate(clk_diu, want);
+		got = clk_get_rate(clk_diu);
+		delta = abs(pixclock - got);
+		if (delta < epsilon)
+			break;
+		if (!offset)
+			continue;
+		want = pixclock + offset;
+		pr_debug("DIU checking clock - %lu\n", want);
+		clk_set_rate(clk_diu, want);
+		got = clk_get_rate(clk_diu);
+		delta = abs(pixclock - got);
+		if (delta < epsilon)
+			break;
+	}
+	if (offset <= epsilon) {
+		pr_debug("DIU clock accepted - %lu\n", want);
+		pr_debug("DIU pixclock want %u, got %lu, delta %lu, eps %lu\n",
+			 pixclock, got, delta, epsilon);
 		return;
 	}
+	pr_warn("DIU pixclock auto search unsuccessful\n");
 
-	/* Pixel Clock configuration */
-	pr_debug("DIU: Bus Frequency = %lu\n", busfreq);
-	speed = busfreq * 4; /* DIU_DIV ratio is 4 * CSB_CLK / DIU_CLK */
-
-	/* Calculate the pixel clock with the smallest error */
-	/* calculate the following in steps to avoid overflow */
-	pr_debug("DIU pixclock in ps - %d\n", pixclock);
-	temp = (1000000000 / pixclock) * 1000;
-	pixclock = temp;
-	pr_debug("DIU pixclock freq - %u\n", pixclock);
-
-	temp = temp / 20; /* pixclock * 0.05 */
-	pr_debug("deviation = %d\n", temp);
-	minpixclock = pixclock - temp;
-	maxpixclock = pixclock + temp;
-	pr_debug("DIU minpixclock - %lu\n", minpixclock);
-	pr_debug("DIU maxpixclock - %lu\n", maxpixclock);
-	pixval = speed/pixclock;
-	pr_debug("DIU pixval = %lu\n", pixval);
-
-	err = LONG_MAX;
-	bestval = pixval;
-	pr_debug("DIU bestval = %lu\n", bestval);
-
-	bestfreq = 0;
-	for (i = -1; i <= 1; i++) {
-		temp = speed / (pixval+i);
-		pr_debug("DIU test pixval i=%d, pixval=%lu, temp freq. = %u\n",
-			i, pixval, temp);
-		if ((temp < minpixclock) || (temp > maxpixclock))
-			pr_debug("DIU exceeds monitor range (%lu to %lu)\n",
-				minpixclock, maxpixclock);
-		else if (abs(temp - pixclock) < err) {
-			pr_debug("Entered the else if block %d\n", i);
-			err = abs(temp - pixclock);
-			bestval = pixval + i;
-			bestfreq = temp;
-		}
-	}
-
-	pr_debug("DIU chose = %lx\n", bestval);
-	pr_debug("DIU error = %ld\n NomPixClk ", err);
-	pr_debug("DIU: Best Freq = %lx\n", bestfreq);
-	/* Modify DIU_DIV in CCM SCFR1 */
-	temp = in_be32(&ccm->scfr1);
-	pr_debug("DIU: Current value of SCFR1: 0x%08x\n", temp);
-	temp &= ~DIU_DIV_MASK;
-	temp |= (bestval & DIU_DIV_MASK);
-	out_be32(&ccm->scfr1, temp);
-	pr_debug("DIU: Modified value of SCFR1: 0x%08x\n", temp);
-	iounmap(ccm);
+	/*
+	 * what is the most appropriate action to take when the search
+	 * for an available pixel clock which is acceptable to the
+	 * monitor has failed?  disable the DIU (clock) or just provide
+	 * a "best effort"?  we go with the latter
+	 */
+	pr_warn("DIU pixclock best effort fallback (backend's choice)\n");
+	clk_set_rate(clk_diu, pixclock);
+	got = clk_get_rate(clk_diu);
+	delta = abs(pixclock - got);
+	pr_debug("DIU pixclock want %u, got %lu, delta %lu, eps %lu\n",
+		 pixclock, got, delta, epsilon);
 }
 
 static enum fsl_diu_monitor_port
diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig
index af54174..b625a2c 100644
--- a/arch/powerpc/platforms/52xx/Kconfig
+++ b/arch/powerpc/platforms/52xx/Kconfig
@@ -1,7 +1,7 @@
 config PPC_MPC52xx
 	bool "52xx-based boards"
 	depends on 6xx
-	select PPC_CLOCK
+	select COMMON_CLK
 	select PPC_PCI_CHOICE
 
 config PPC_MPC5200_SIMPLE
diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c
index a932feb..21166f6 100644
--- a/arch/powerpc/platforms/powernv/setup.c
+++ b/arch/powerpc/platforms/powernv/setup.c
@@ -26,6 +26,7 @@
 #include <linux/of_fdt.h>
 #include <linux/interrupt.h>
 #include <linux/bug.h>
+#include <linux/cpuidle.h>
 
 #include <asm/machdep.h>
 #include <asm/firmware.h>
@@ -216,6 +217,16 @@
 	return 1;
 }
 
+void powernv_idle(void)
+{
+	/* Hook to cpuidle framework if available, else
+	 * call on default platform idle code
+	 */
+	if (cpuidle_idle_call()) {
+		power7_idle();
+	}
+}
+
 define_machine(powernv) {
 	.name			= "PowerNV",
 	.probe			= pnv_probe,
@@ -225,7 +236,7 @@
 	.show_cpuinfo		= pnv_show_cpuinfo,
 	.progress		= pnv_progress,
 	.machine_shutdown	= pnv_shutdown,
-	.power_save             = power7_idle,
+	.power_save             = powernv_idle,
 	.calibrate_decr		= generic_calibrate_decr,
 #ifdef CONFIG_KEXEC
 	.kexec_cpu_down		= pnv_kexec_cpu_down,
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index e666432..37300f6 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -119,12 +119,3 @@
 	  which are accessible through a debugfs file.
 
 	  Say N if you are unsure.
-
-config PSERIES_IDLE
-	bool "Cpuidle driver for pSeries platforms"
-	depends on CPU_IDLE
-	depends on PPC_PSERIES
-	default y
-	help
-	  Select this option to enable processor idle state management
-	  through cpuidle subsystem.
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index fbccac9..0348079 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -21,7 +21,6 @@
 obj-$(CONFIG_CMM)		+= cmm.o
 obj-$(CONFIG_DTL)		+= dtl.o
 obj-$(CONFIG_IO_EVENT_IRQ)	+= io_event_irq.o
-obj-$(CONFIG_PSERIES_IDLE)	+= processor_idle.o
 obj-$(CONFIG_LPARCFG)		+= lparcfg.o
 
 ifeq ($(CONFIG_PPC_PSERIES),y)
diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c
index bd968a4..62c47bb 100644
--- a/arch/powerpc/sysdev/dart_iommu.c
+++ b/arch/powerpc/sysdev/dart_iommu.c
@@ -292,6 +292,7 @@
 	iommu_table_dart.it_offset = 0;
 	/* it_size is in number of entries */
 	iommu_table_dart.it_size = dart_tablesize / sizeof(u32);
+	iommu_table_dart.it_page_shift = IOMMU_PAGE_SHIFT_4K;
 
 	/* Initialize the common IOMMU code */
 	iommu_table_dart.it_base = (unsigned long)dart_vbase;
diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig
index b3fb81d..f04e25f 100644
--- a/drivers/cpuidle/Kconfig
+++ b/drivers/cpuidle/Kconfig
@@ -35,6 +35,11 @@
 source "drivers/cpuidle/Kconfig.arm"
 endmenu
 
+menu "POWERPC CPU Idle Drivers"
+depends on PPC
+source "drivers/cpuidle/Kconfig.powerpc"
+endmenu
+
 endif
 
 config ARCH_NEEDS_CPU_IDLE_COUPLED
diff --git a/drivers/cpuidle/Kconfig.powerpc b/drivers/cpuidle/Kconfig.powerpc
new file mode 100644
index 0000000..66c3a09
--- /dev/null
+++ b/drivers/cpuidle/Kconfig.powerpc
@@ -0,0 +1,20 @@
+#
+# POWERPC CPU Idle Drivers
+#
+config PSERIES_CPUIDLE
+	bool "Cpuidle driver for pSeries platforms"
+	depends on CPU_IDLE
+	depends on PPC_PSERIES
+	default y
+	help
+	  Select this option to enable processor idle state management
+	  through cpuidle subsystem.
+
+config POWERNV_CPUIDLE
+	bool "Cpuidle driver for powernv platforms"
+	depends on CPU_IDLE
+	depends on PPC_POWERNV
+	default y
+	help
+	  Select this option to enable processor idle state management
+	  through cpuidle subsystem.
diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile
index 527be28..f71ae1b 100644
--- a/drivers/cpuidle/Makefile
+++ b/drivers/cpuidle/Makefile
@@ -13,3 +13,8 @@
 obj-$(CONFIG_ARM_ZYNQ_CPUIDLE)		+= cpuidle-zynq.o
 obj-$(CONFIG_ARM_U8500_CPUIDLE)         += cpuidle-ux500.o
 obj-$(CONFIG_ARM_AT91_CPUIDLE)          += cpuidle-at91.o
+
+###############################################################################
+# POWERPC drivers
+obj-$(CONFIG_PSERIES_CPUIDLE)		+= cpuidle-pseries.o
+obj-$(CONFIG_POWERNV_CPUIDLE)		+= cpuidle-powernv.o
diff --git a/drivers/cpuidle/cpuidle-powernv.c b/drivers/cpuidle/cpuidle-powernv.c
new file mode 100644
index 0000000..78fd174
--- /dev/null
+++ b/drivers/cpuidle/cpuidle-powernv.c
@@ -0,0 +1,169 @@
+/*
+ *  cpuidle-powernv - idle state cpuidle driver.
+ *  Adapted from drivers/cpuidle/cpuidle-pseries
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+#include <linux/cpuidle.h>
+#include <linux/cpu.h>
+#include <linux/notifier.h>
+
+#include <asm/machdep.h>
+#include <asm/firmware.h>
+
+struct cpuidle_driver powernv_idle_driver = {
+	.name             = "powernv_idle",
+	.owner            = THIS_MODULE,
+};
+
+static int max_idle_state;
+static struct cpuidle_state *cpuidle_state_table;
+
+static int snooze_loop(struct cpuidle_device *dev,
+			struct cpuidle_driver *drv,
+			int index)
+{
+	local_irq_enable();
+	set_thread_flag(TIF_POLLING_NRFLAG);
+
+	while (!need_resched()) {
+		HMT_low();
+		HMT_very_low();
+	}
+
+	HMT_medium();
+	clear_thread_flag(TIF_POLLING_NRFLAG);
+	smp_mb();
+	return index;
+}
+
+static int nap_loop(struct cpuidle_device *dev,
+			struct cpuidle_driver *drv,
+			int index)
+{
+	power7_idle();
+	return index;
+}
+
+/*
+ * States for dedicated partition case.
+ */
+static struct cpuidle_state powernv_states[] = {
+	{ /* Snooze */
+		.name = "snooze",
+		.desc = "snooze",
+		.flags = CPUIDLE_FLAG_TIME_VALID,
+		.exit_latency = 0,
+		.target_residency = 0,
+		.enter = &snooze_loop },
+	{ /* NAP */
+		.name = "NAP",
+		.desc = "NAP",
+		.flags = CPUIDLE_FLAG_TIME_VALID,
+		.exit_latency = 10,
+		.target_residency = 100,
+		.enter = &nap_loop },
+};
+
+static int powernv_cpuidle_add_cpu_notifier(struct notifier_block *n,
+			unsigned long action, void *hcpu)
+{
+	int hotcpu = (unsigned long)hcpu;
+	struct cpuidle_device *dev =
+				per_cpu(cpuidle_devices, hotcpu);
+
+	if (dev && cpuidle_get_driver()) {
+		switch (action) {
+		case CPU_ONLINE:
+		case CPU_ONLINE_FROZEN:
+			cpuidle_pause_and_lock();
+			cpuidle_enable_device(dev);
+			cpuidle_resume_and_unlock();
+			break;
+
+		case CPU_DEAD:
+		case CPU_DEAD_FROZEN:
+			cpuidle_pause_and_lock();
+			cpuidle_disable_device(dev);
+			cpuidle_resume_and_unlock();
+			break;
+
+		default:
+			return NOTIFY_DONE;
+		}
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block setup_hotplug_notifier = {
+	.notifier_call = powernv_cpuidle_add_cpu_notifier,
+};
+
+/*
+ * powernv_cpuidle_driver_init()
+ */
+static int powernv_cpuidle_driver_init(void)
+{
+	int idle_state;
+	struct cpuidle_driver *drv = &powernv_idle_driver;
+
+	drv->state_count = 0;
+
+	for (idle_state = 0; idle_state < max_idle_state; ++idle_state) {
+		/* Is the state not enabled? */
+		if (cpuidle_state_table[idle_state].enter == NULL)
+			continue;
+
+		drv->states[drv->state_count] =	/* structure copy */
+			cpuidle_state_table[idle_state];
+
+		drv->state_count += 1;
+	}
+
+	return 0;
+}
+
+/*
+ * powernv_idle_probe()
+ * Choose state table for shared versus dedicated partition
+ */
+static int powernv_idle_probe(void)
+{
+
+	if (cpuidle_disable != IDLE_NO_OVERRIDE)
+		return -ENODEV;
+
+	if (firmware_has_feature(FW_FEATURE_OPALv3)) {
+		cpuidle_state_table = powernv_states;
+		max_idle_state = ARRAY_SIZE(powernv_states);
+ 	} else
+ 		return -ENODEV;
+
+	return 0;
+}
+
+static int __init powernv_processor_idle_init(void)
+{
+	int retval;
+
+	retval = powernv_idle_probe();
+	if (retval)
+		return retval;
+
+	powernv_cpuidle_driver_init();
+	retval = cpuidle_register(&powernv_idle_driver, NULL);
+	if (retval) {
+		printk(KERN_DEBUG "Registration of powernv driver failed.\n");
+		return retval;
+	}
+
+	register_cpu_notifier(&setup_hotplug_notifier);
+	printk(KERN_DEBUG "powernv_idle_driver registered\n");
+	return 0;
+}
+
+device_initcall(powernv_processor_idle_init);
diff --git a/arch/powerpc/platforms/pseries/processor_idle.c b/drivers/cpuidle/cpuidle-pseries.c
similarity index 75%
rename from arch/powerpc/platforms/pseries/processor_idle.c
rename to drivers/cpuidle/cpuidle-pseries.c
index 002d5b4..7ab564a 100644
--- a/arch/powerpc/platforms/pseries/processor_idle.c
+++ b/drivers/cpuidle/cpuidle-pseries.c
@@ -1,5 +1,5 @@
 /*
- *  processor_idle - idle state cpuidle driver.
+ *  cpuidle-pseries - idle state cpuidle driver.
  *  Adapted from drivers/idle/intel_idle.c and
  *  drivers/acpi/processor_idle.c
  *
@@ -24,9 +24,7 @@
 	.owner            = THIS_MODULE,
 };
 
-#define MAX_IDLE_STATE_COUNT	2
-
-static int max_idle_state = MAX_IDLE_STATE_COUNT - 1;
+static int max_idle_state;
 static struct cpuidle_state *cpuidle_state_table;
 
 static inline void idle_loop_prolog(unsigned long *in_purr)
@@ -54,13 +52,12 @@
 			int index)
 {
 	unsigned long in_purr;
-	int cpu = dev->cpu;
 
 	idle_loop_prolog(&in_purr);
 	local_irq_enable();
 	set_thread_flag(TIF_POLLING_NRFLAG);
 
-	while ((!need_resched()) && cpu_online(cpu)) {
+	while (!need_resched()) {
 		HMT_low();
 		HMT_very_low();
 	}
@@ -135,7 +132,7 @@
 /*
  * States for dedicated partition case.
  */
-static struct cpuidle_state dedicated_states[MAX_IDLE_STATE_COUNT] = {
+static struct cpuidle_state dedicated_states[] = {
 	{ /* Snooze */
 		.name = "snooze",
 		.desc = "snooze",
@@ -155,7 +152,7 @@
 /*
  * States for shared partition case.
  */
-static struct cpuidle_state shared_states[MAX_IDLE_STATE_COUNT] = {
+static struct cpuidle_state shared_states[] = {
 	{ /* Shared Cede */
 		.name = "Shared Cede",
 		.desc = "Shared Cede",
@@ -165,29 +162,12 @@
 		.enter = &shared_cede_loop },
 };
 
-void update_smt_snooze_delay(int cpu, int residency)
-{
-	struct cpuidle_driver *drv = cpuidle_get_driver();
-	struct cpuidle_device *dev = per_cpu(cpuidle_devices, cpu);
-
-	if (cpuidle_state_table != dedicated_states)
-		return;
-
-	if (residency < 0) {
-		/* Disable the Nap state on that cpu */
-		if (dev)
-			dev->states_usage[1].disable = 1;
-	} else
-		if (drv)
-			drv->states[1].target_residency = residency;
-}
-
 static int pseries_cpuidle_add_cpu_notifier(struct notifier_block *n,
 			unsigned long action, void *hcpu)
 {
 	int hotcpu = (unsigned long)hcpu;
 	struct cpuidle_device *dev =
-			per_cpu_ptr(cpuidle_devices, hotcpu);
+				per_cpu(cpuidle_devices, hotcpu);
 
 	if (dev && cpuidle_get_driver()) {
 		switch (action) {
@@ -226,12 +206,8 @@
 
 	drv->state_count = 0;
 
-	for (idle_state = 0; idle_state < MAX_IDLE_STATE_COUNT; ++idle_state) {
-
-		if (idle_state > max_idle_state)
-			break;
-
-		/* is the state not enabled? */
+	for (idle_state = 0; idle_state < max_idle_state; ++idle_state) {
+		/* Is the state not enabled? */
 		if (cpuidle_state_table[idle_state].enter == NULL)
 			continue;
 
@@ -251,21 +227,19 @@
 static int pseries_idle_probe(void)
 {
 
-	if (!firmware_has_feature(FW_FEATURE_SPLPAR))
-		return -ENODEV;
-
 	if (cpuidle_disable != IDLE_NO_OVERRIDE)
 		return -ENODEV;
 
-	if (max_idle_state == 0) {
-		printk(KERN_DEBUG "pseries processor idle disabled.\n");
-		return -EPERM;
-	}
-
-	if (lppaca_shared_proc(get_lppaca()))
-		cpuidle_state_table = shared_states;
-	else
-		cpuidle_state_table = dedicated_states;
+	if (firmware_has_feature(FW_FEATURE_SPLPAR)) {
+		if (lppaca_shared_proc(get_lppaca())) {
+			cpuidle_state_table = shared_states;
+			max_idle_state = ARRAY_SIZE(shared_states);
+		} else {
+			cpuidle_state_table = dedicated_states;
+			max_idle_state = ARRAY_SIZE(dedicated_states);
+		}
+	} else
+		return -ENODEV;
 
 	return 0;
 }
@@ -287,22 +261,7 @@
 
 	register_cpu_notifier(&setup_hotplug_notifier);
 	printk(KERN_DEBUG "pseries_idle_driver registered\n");
-
 	return 0;
 }
 
-static void __exit pseries_processor_idle_exit(void)
-{
-
-	unregister_cpu_notifier(&setup_hotplug_notifier);
-	cpuidle_unregister(&pseries_idle_driver);
-
-	return;
-}
-
-module_init(pseries_processor_idle_init);
-module_exit(pseries_processor_idle_exit);
-
-MODULE_AUTHOR("Deepthi Dharwar <deepthi@linux.vnet.ibm.com>");
-MODULE_DESCRIPTION("Cpuidle driver for POWER");
-MODULE_LICENSE("GPL");
+device_initcall(pseries_processor_idle_init);
diff --git a/drivers/media/platform/fsl-viu.c b/drivers/media/platform/fsl-viu.c
index 6a23223..dbf0ce3 100644
--- a/drivers/media/platform/fsl-viu.c
+++ b/drivers/media/platform/fsl-viu.c
@@ -1580,7 +1580,7 @@
 	}
 
 	/* enable VIU clock */
-	clk = devm_clk_get(&op->dev, "viu_clk");
+	clk = devm_clk_get(&op->dev, "ipg");
 	if (IS_ERR(clk)) {
 		dev_err(&op->dev, "failed to lookup the clock!\n");
 		ret = PTR_ERR(clk);
diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c
index 61e2abc..31ee7cf 100644
--- a/drivers/mtd/nand/mpc5121_nfc.c
+++ b/drivers/mtd/nand/mpc5121_nfc.c
@@ -729,7 +729,7 @@
 	of_node_put(rootnode);
 
 	/* Enable NFC clock */
-	clk = devm_clk_get(dev, "nfc_clk");
+	clk = devm_clk_get(dev, "ipg");
 	if (IS_ERR(clk)) {
 		dev_err(dev, "Unable to acquire NFC clock!\n");
 		retval = PTR_ERR(clk);
diff --git a/drivers/net/can/mscan/mpc5xxx_can.c b/drivers/net/can/mscan/mpc5xxx_can.c
index 035e235..4472529 100644
--- a/drivers/net/can/mscan/mpc5xxx_can.c
+++ b/drivers/net/can/mscan/mpc5xxx_can.c
@@ -108,135 +108,170 @@
 #endif /* CONFIG_PPC_MPC52xx */
 
 #ifdef CONFIG_PPC_MPC512x
-struct mpc512x_clockctl {
-	u32 spmr;		/* System PLL Mode Reg */
-	u32 sccr[2];		/* System Clk Ctrl Reg 1 & 2 */
-	u32 scfr1;		/* System Clk Freq Reg 1 */
-	u32 scfr2;		/* System Clk Freq Reg 2 */
-	u32 reserved;
-	u32 bcr;		/* Bread Crumb Reg */
-	u32 pccr[12];		/* PSC Clk Ctrl Reg 0-11 */
-	u32 spccr;		/* SPDIF Clk Ctrl Reg */
-	u32 cccr;		/* CFM Clk Ctrl Reg */
-	u32 dccr;		/* DIU Clk Cnfg Reg */
-	u32 mccr[4];		/* MSCAN Clk Ctrl Reg 1-3 */
-};
-
-static struct of_device_id mpc512x_clock_ids[] = {
-	{ .compatible = "fsl,mpc5121-clock", },
-	{}
-};
-
 static u32 mpc512x_can_get_clock(struct platform_device *ofdev,
-				 const char *clock_name, int *mscan_clksrc)
+				 const char *clock_source, int *mscan_clksrc)
 {
-	struct mpc512x_clockctl __iomem *clockctl;
-	struct device_node *np_clock;
-	struct clk *sys_clk, *ref_clk;
-	int plen, clockidx, clocksrc = -1;
-	u32 sys_freq, val, clockdiv = 1, freq = 0;
-	const u32 *pval;
+	struct device_node *np;
+	u32 clockdiv;
+	enum {
+		CLK_FROM_AUTO,
+		CLK_FROM_IPS,
+		CLK_FROM_SYS,
+		CLK_FROM_REF,
+	} clk_from;
+	struct clk *clk_in, *clk_can;
+	unsigned long freq_calc;
+	struct mscan_priv *priv;
+	struct clk *clk_ipg;
 
-	np_clock = of_find_matching_node(NULL, mpc512x_clock_ids);
-	if (!np_clock) {
-		dev_err(&ofdev->dev, "couldn't find clock node\n");
-		return 0;
+	/* the caller passed in the clock source spec that was read from
+	 * the device tree, get the optional clock divider as well
+	 */
+	np = ofdev->dev.of_node;
+	clockdiv = 1;
+	of_property_read_u32(np, "fsl,mscan-clock-divider", &clockdiv);
+	dev_dbg(&ofdev->dev, "device tree specs: clk src[%s] div[%d]\n",
+		clock_source ? clock_source : "<NULL>", clockdiv);
+
+	/* when clock-source is 'ip', the CANCTL1[CLKSRC] bit needs to
+	 * get set, and the 'ips' clock is the input to the MSCAN
+	 * component
+	 *
+	 * for clock-source values of 'ref' or 'sys' the CANCTL1[CLKSRC]
+	 * bit needs to get cleared, an optional clock-divider may have
+	 * been specified (the default value is 1), the appropriate
+	 * MSCAN related MCLK is the input to the MSCAN component
+	 *
+	 * in the absence of a clock-source spec, first an optimal clock
+	 * gets determined based on the 'sys' clock, if that fails the
+	 * 'ref' clock is used
+	 */
+	clk_from = CLK_FROM_AUTO;
+	if (clock_source) {
+		/* interpret the device tree's spec for the clock source */
+		if (!strcmp(clock_source, "ip"))
+			clk_from = CLK_FROM_IPS;
+		else if (!strcmp(clock_source, "sys"))
+			clk_from = CLK_FROM_SYS;
+		else if (!strcmp(clock_source, "ref"))
+			clk_from = CLK_FROM_REF;
+		else
+			goto err_invalid;
+		dev_dbg(&ofdev->dev, "got a clk source spec[%d]\n", clk_from);
 	}
-	clockctl = of_iomap(np_clock, 0);
-	if (!clockctl) {
-		dev_err(&ofdev->dev, "couldn't map clock registers\n");
-		goto exit_put;
+	if (clk_from == CLK_FROM_AUTO) {
+		/* no spec so far, try the 'sys' clock; round to the
+		 * next MHz and see if we can get a multiple of 16MHz
+		 */
+		dev_dbg(&ofdev->dev, "no clk source spec, trying SYS\n");
+		clk_in = devm_clk_get(&ofdev->dev, "sys");
+		if (IS_ERR(clk_in))
+			goto err_notavail;
+		freq_calc = clk_get_rate(clk_in);
+		freq_calc +=  499999;
+		freq_calc /= 1000000;
+		freq_calc *= 1000000;
+		if ((freq_calc % 16000000) == 0) {
+			clk_from = CLK_FROM_SYS;
+			clockdiv = freq_calc / 16000000;
+			dev_dbg(&ofdev->dev,
+				"clk fit, sys[%lu] div[%d] freq[%lu]\n",
+				freq_calc, clockdiv, freq_calc / clockdiv);
+		}
+	}
+	if (clk_from == CLK_FROM_AUTO) {
+		/* no spec so far, use the 'ref' clock */
+		dev_dbg(&ofdev->dev, "no clk source spec, trying REF\n");
+		clk_in = devm_clk_get(&ofdev->dev, "ref");
+		if (IS_ERR(clk_in))
+			goto err_notavail;
+		clk_from = CLK_FROM_REF;
+		freq_calc = clk_get_rate(clk_in);
+		dev_dbg(&ofdev->dev,
+			"clk fit, ref[%lu] (no div) freq[%lu]\n",
+			freq_calc, freq_calc);
 	}
 
-	/* Determine the MSCAN device index from the peripheral's
-	 * physical address. Register address offsets against the
-	 * IMMR base are:  0x1300, 0x1380, 0x2300, 0x2380
+	/* select IPS or MCLK as the MSCAN input (returned to the caller),
+	 * setup the MCLK mux source and rate if applicable, apply the
+	 * optionally specified or derived above divider, and determine
+	 * the actual resulting clock rate to return to the caller
 	 */
-	pval = of_get_property(ofdev->dev.of_node, "reg", &plen);
-	BUG_ON(!pval || plen < sizeof(*pval));
-	clockidx = (*pval & 0x80) ? 1 : 0;
-	if (*pval & 0x2000)
-		clockidx += 2;
-
-	/*
-	 * Clock source and divider selection: 3 different clock sources
-	 * can be selected: "ip", "ref" or "sys". For the latter two, a
-	 * clock divider can be defined as well. If the clock source is
-	 * not specified by the device tree, we first try to find an
-	 * optimal CAN source clock based on the system clock. If that
-	 * is not posslible, the reference clock will be used.
-	 */
-	if (clock_name && !strcmp(clock_name, "ip")) {
+	switch (clk_from) {
+	case CLK_FROM_IPS:
+		clk_can = devm_clk_get(&ofdev->dev, "ips");
+		if (IS_ERR(clk_can))
+			goto err_notavail;
+		priv = netdev_priv(dev_get_drvdata(&ofdev->dev));
+		priv->clk_can = clk_can;
+		freq_calc = clk_get_rate(clk_can);
 		*mscan_clksrc = MSCAN_CLKSRC_IPS;
-		freq = mpc5xxx_get_bus_frequency(ofdev->dev.of_node);
-	} else {
+		dev_dbg(&ofdev->dev, "clk from IPS, clksrc[%d] freq[%lu]\n",
+			*mscan_clksrc, freq_calc);
+		break;
+	case CLK_FROM_SYS:
+	case CLK_FROM_REF:
+		clk_can = devm_clk_get(&ofdev->dev, "mclk");
+		if (IS_ERR(clk_can))
+			goto err_notavail;
+		priv = netdev_priv(dev_get_drvdata(&ofdev->dev));
+		priv->clk_can = clk_can;
+		if (clk_from == CLK_FROM_SYS)
+			clk_in = devm_clk_get(&ofdev->dev, "sys");
+		if (clk_from == CLK_FROM_REF)
+			clk_in = devm_clk_get(&ofdev->dev, "ref");
+		if (IS_ERR(clk_in))
+			goto err_notavail;
+		clk_set_parent(clk_can, clk_in);
+		freq_calc = clk_get_rate(clk_in);
+		freq_calc /= clockdiv;
+		clk_set_rate(clk_can, freq_calc);
+		freq_calc = clk_get_rate(clk_can);
 		*mscan_clksrc = MSCAN_CLKSRC_BUS;
-
-		pval = of_get_property(ofdev->dev.of_node,
-				       "fsl,mscan-clock-divider", &plen);
-		if (pval && plen == sizeof(*pval))
-			clockdiv = *pval;
-		if (!clockdiv)
-			clockdiv = 1;
-
-		if (!clock_name || !strcmp(clock_name, "sys")) {
-			sys_clk = devm_clk_get(&ofdev->dev, "sys_clk");
-			if (IS_ERR(sys_clk)) {
-				dev_err(&ofdev->dev, "couldn't get sys_clk\n");
-				goto exit_unmap;
-			}
-			/* Get and round up/down sys clock rate */
-			sys_freq = 1000000 *
-				((clk_get_rate(sys_clk) + 499999) / 1000000);
-
-			if (!clock_name) {
-				/* A multiple of 16 MHz would be optimal */
-				if ((sys_freq % 16000000) == 0) {
-					clocksrc = 0;
-					clockdiv = sys_freq / 16000000;
-					freq = sys_freq / clockdiv;
-				}
-			} else {
-				clocksrc = 0;
-				freq = sys_freq / clockdiv;
-			}
-		}
-
-		if (clocksrc < 0) {
-			ref_clk = devm_clk_get(&ofdev->dev, "ref_clk");
-			if (IS_ERR(ref_clk)) {
-				dev_err(&ofdev->dev, "couldn't get ref_clk\n");
-				goto exit_unmap;
-			}
-			clocksrc = 1;
-			freq = clk_get_rate(ref_clk) / clockdiv;
-		}
+		dev_dbg(&ofdev->dev, "clk from MCLK, clksrc[%d] freq[%lu]\n",
+			*mscan_clksrc, freq_calc);
+		break;
+	default:
+		goto err_invalid;
 	}
 
-	/* Disable clock */
-	out_be32(&clockctl->mccr[clockidx], 0x0);
-	if (clocksrc >= 0) {
-		/* Set source and divider */
-		val = (clocksrc << 14) | ((clockdiv - 1) << 17);
-		out_be32(&clockctl->mccr[clockidx], val);
-		/* Enable clock */
-		out_be32(&clockctl->mccr[clockidx], val | 0x10000);
-	}
+	/* the above clk_can item is used for the bitrate, access to
+	 * the peripheral's register set needs the clk_ipg item
+	 */
+	clk_ipg = devm_clk_get(&ofdev->dev, "ipg");
+	if (IS_ERR(clk_ipg))
+		goto err_notavail_ipg;
+	if (clk_prepare_enable(clk_ipg))
+		goto err_notavail_ipg;
+	priv = netdev_priv(dev_get_drvdata(&ofdev->dev));
+	priv->clk_ipg = clk_ipg;
 
-	/* Enable MSCAN clock domain */
-	val = in_be32(&clockctl->sccr[1]);
-	if (!(val & (1 << 25)))
-		out_be32(&clockctl->sccr[1], val | (1 << 25));
+	/* return the determined clock source rate */
+	return freq_calc;
 
-	dev_dbg(&ofdev->dev, "using '%s' with frequency divider %d\n",
-		*mscan_clksrc == MSCAN_CLKSRC_IPS ? "ips_clk" :
-		clocksrc == 1 ? "ref_clk" : "sys_clk", clockdiv);
+err_invalid:
+	dev_err(&ofdev->dev, "invalid clock source specification\n");
+	/* clock source rate could not get determined */
+	return 0;
 
-exit_unmap:
-	iounmap(clockctl);
-exit_put:
-	of_node_put(np_clock);
-	return freq;
+err_notavail:
+	dev_err(&ofdev->dev, "cannot acquire or setup bitrate clock source\n");
+	/* clock source rate could not get determined */
+	return 0;
+
+err_notavail_ipg:
+	dev_err(&ofdev->dev, "cannot acquire or setup register clock\n");
+	/* clock source rate could not get determined */
+	return 0;
+}
+
+static void mpc512x_can_put_clock(struct platform_device *ofdev)
+{
+	struct mscan_priv *priv;
+
+	priv = netdev_priv(dev_get_drvdata(&ofdev->dev));
+	if (priv->clk_ipg)
+		clk_disable_unprepare(priv->clk_ipg);
 }
 #else /* !CONFIG_PPC_MPC512x */
 static u32 mpc512x_can_get_clock(struct platform_device *ofdev,
@@ -244,6 +279,7 @@
 {
 	return 0;
 }
+#define mpc512x_can_put_clock NULL
 #endif /* CONFIG_PPC_MPC512x */
 
 static const struct of_device_id mpc5xxx_can_table[];
@@ -385,11 +421,13 @@
 static const struct mpc5xxx_can_data mpc5200_can_data = {
 	.type = MSCAN_TYPE_MPC5200,
 	.get_clock = mpc52xx_can_get_clock,
+	/* .put_clock not applicable */
 };
 
 static const struct mpc5xxx_can_data mpc5121_can_data = {
 	.type = MSCAN_TYPE_MPC5121,
 	.get_clock = mpc512x_can_get_clock,
+	.put_clock = mpc512x_can_put_clock,
 };
 
 static const struct of_device_id mpc5xxx_can_table[] = {
diff --git a/drivers/spi/spi-mpc512x-psc.c b/drivers/spi/spi-mpc512x-psc.c
index 46d2313..5032141 100644
--- a/drivers/spi/spi-mpc512x-psc.c
+++ b/drivers/spi/spi-mpc512x-psc.c
@@ -40,6 +40,7 @@
 	unsigned int irq;
 	u8 bits_per_word;
 	struct clk *clk_mclk;
+	struct clk *clk_ipg;
 	u32 mclk_rate;
 
 	struct completion txisrdone;
@@ -475,8 +476,6 @@
 	struct spi_master *master;
 	int ret;
 	void *tempp;
-	int psc_num;
-	char clk_name[16];
 	struct clk *clk;
 
 	master = spi_alloc_master(dev, sizeof *mps);
@@ -519,9 +518,7 @@
 		goto free_master;
 	init_completion(&mps->txisrdone);
 
-	psc_num = master->bus_num;
-	snprintf(clk_name, sizeof(clk_name), "psc%d_mclk", psc_num);
-	clk = devm_clk_get(dev, clk_name);
+	clk = devm_clk_get(dev, "mclk");
 	if (IS_ERR(clk)) {
 		ret = PTR_ERR(clk);
 		goto free_master;
@@ -532,17 +529,29 @@
 	mps->clk_mclk = clk;
 	mps->mclk_rate = clk_get_rate(clk);
 
+	clk = devm_clk_get(dev, "ipg");
+	if (IS_ERR(clk)) {
+		ret = PTR_ERR(clk);
+		goto free_mclk_clock;
+	}
+	ret = clk_prepare_enable(clk);
+	if (ret)
+		goto free_mclk_clock;
+	mps->clk_ipg = clk;
+
 	ret = mpc512x_psc_spi_port_config(master, mps);
 	if (ret < 0)
-		goto free_clock;
+		goto free_ipg_clock;
 
 	ret = devm_spi_register_master(dev, master);
 	if (ret < 0)
-		goto free_clock;
+		goto free_ipg_clock;
 
 	return ret;
 
-free_clock:
+free_ipg_clock:
+	clk_disable_unprepare(mps->clk_ipg);
+free_mclk_clock:
 	clk_disable_unprepare(mps->clk_mclk);
 free_master:
 	spi_master_put(master);
@@ -556,6 +565,7 @@
 	struct mpc512x_psc_spi *mps = spi_master_get_devdata(master);
 
 	clk_disable_unprepare(mps->clk_mclk);
+	clk_disable_unprepare(mps->clk_ipg);
 
 	return 0;
 }
diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c
index ec06505..97888f4 100644
--- a/drivers/tty/serial/mpc52xx_uart.c
+++ b/drivers/tty/serial/mpc52xx_uart.c
@@ -421,6 +421,7 @@
 
 static struct psc_fifoc __iomem *psc_fifoc;
 static unsigned int psc_fifoc_irq;
+static struct clk *psc_fifoc_clk;
 
 static void mpc512x_psc_fifo_init(struct uart_port *port)
 {
@@ -568,36 +569,73 @@
 /* Init PSC FIFO Controller */
 static int __init mpc512x_psc_fifoc_init(void)
 {
+	int err;
 	struct device_node *np;
+	struct clk *clk;
+
+	/* default error code, potentially overwritten by clock calls */
+	err = -ENODEV;
 
 	np = of_find_compatible_node(NULL, NULL,
 				     "fsl,mpc5121-psc-fifo");
 	if (!np) {
 		pr_err("%s: Can't find FIFOC node\n", __func__);
-		return -ENODEV;
+		goto out_err;
 	}
 
+	clk = of_clk_get(np, 0);
+	if (IS_ERR(clk)) {
+		/* backwards compat with device trees that lack clock specs */
+		clk = clk_get_sys(np->name, "ipg");
+	}
+	if (IS_ERR(clk)) {
+		pr_err("%s: Can't lookup FIFO clock\n", __func__);
+		err = PTR_ERR(clk);
+		goto out_ofnode_put;
+	}
+	if (clk_prepare_enable(clk)) {
+		pr_err("%s: Can't enable FIFO clock\n", __func__);
+		clk_put(clk);
+		goto out_ofnode_put;
+	}
+	psc_fifoc_clk = clk;
+
 	psc_fifoc = of_iomap(np, 0);
 	if (!psc_fifoc) {
 		pr_err("%s: Can't map FIFOC\n", __func__);
-		of_node_put(np);
-		return -ENODEV;
+		goto out_clk_disable;
 	}
 
 	psc_fifoc_irq = irq_of_parse_and_map(np, 0);
-	of_node_put(np);
 	if (psc_fifoc_irq == 0) {
 		pr_err("%s: Can't get FIFOC irq\n", __func__);
-		iounmap(psc_fifoc);
-		return -ENODEV;
+		goto out_unmap;
 	}
 
+	of_node_put(np);
 	return 0;
+
+out_unmap:
+	iounmap(psc_fifoc);
+out_clk_disable:
+	clk_disable_unprepare(psc_fifoc_clk);
+	clk_put(psc_fifoc_clk);
+out_ofnode_put:
+	of_node_put(np);
+out_err:
+	return err;
 }
 
 static void __exit mpc512x_psc_fifoc_uninit(void)
 {
 	iounmap(psc_fifoc);
+
+	/* disable the clock, errors are not fatal */
+	if (psc_fifoc_clk) {
+		clk_disable_unprepare(psc_fifoc_clk);
+		clk_put(psc_fifoc_clk);
+		psc_fifoc_clk = NULL;
+	}
 }
 
 /* 512x specific interrupt handler. The caller holds the port lock */
@@ -619,29 +657,55 @@
 }
 
 static struct clk *psc_mclk_clk[MPC52xx_PSC_MAXNUM];
+static struct clk *psc_ipg_clk[MPC52xx_PSC_MAXNUM];
 
 /* called from within the .request_port() callback (allocation) */
 static int mpc512x_psc_alloc_clock(struct uart_port *port)
 {
 	int psc_num;
-	char clk_name[16];
 	struct clk *clk;
 	int err;
 
 	psc_num = (port->mapbase & 0xf00) >> 8;
-	snprintf(clk_name, sizeof(clk_name), "psc%d_mclk", psc_num);
-	clk = devm_clk_get(port->dev, clk_name);
+
+	clk = devm_clk_get(port->dev, "mclk");
 	if (IS_ERR(clk)) {
 		dev_err(port->dev, "Failed to get MCLK!\n");
-		return PTR_ERR(clk);
+		err = PTR_ERR(clk);
+		goto out_err;
 	}
 	err = clk_prepare_enable(clk);
 	if (err) {
 		dev_err(port->dev, "Failed to enable MCLK!\n");
-		return err;
+		goto out_err;
 	}
 	psc_mclk_clk[psc_num] = clk;
+
+	clk = devm_clk_get(port->dev, "ipg");
+	if (IS_ERR(clk)) {
+		dev_err(port->dev, "Failed to get IPG clock!\n");
+		err = PTR_ERR(clk);
+		goto out_err;
+	}
+	err = clk_prepare_enable(clk);
+	if (err) {
+		dev_err(port->dev, "Failed to enable IPG clock!\n");
+		goto out_err;
+	}
+	psc_ipg_clk[psc_num] = clk;
+
 	return 0;
+
+out_err:
+	if (psc_mclk_clk[psc_num]) {
+		clk_disable_unprepare(psc_mclk_clk[psc_num]);
+		psc_mclk_clk[psc_num] = NULL;
+	}
+	if (psc_ipg_clk[psc_num]) {
+		clk_disable_unprepare(psc_ipg_clk[psc_num]);
+		psc_ipg_clk[psc_num] = NULL;
+	}
+	return err;
 }
 
 /* called from within the .release_port() callback (release) */
@@ -656,6 +720,10 @@
 		clk_disable_unprepare(clk);
 		psc_mclk_clk[psc_num] = NULL;
 	}
+	if (psc_ipg_clk[psc_num]) {
+		clk_disable_unprepare(psc_ipg_clk[psc_num]);
+		psc_ipg_clk[psc_num] = NULL;
+	}
 }
 
 /* implementation of the .clock() callback (enable/disable) */
diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c
index abd5050..9162d1b 100644
--- a/drivers/usb/host/fsl-mph-dr-of.c
+++ b/drivers/usb/host/fsl-mph-dr-of.c
@@ -261,19 +261,8 @@
 	struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev);
 	struct clk *clk;
 	int err;
-	char clk_name[10];
-	int base, clk_num;
 
-	base = pdev->resource->start & 0xf000;
-	if (base == 0x3000)
-		clk_num = 1;
-	else if (base == 0x4000)
-		clk_num = 2;
-	else
-		return -ENODEV;
-
-	snprintf(clk_name, sizeof(clk_name), "usb%d_clk", clk_num);
-	clk = devm_clk_get(pdev->dev.parent, clk_name);
+	clk = devm_clk_get(pdev->dev.parent, "ipg");
 	if (IS_ERR(clk)) {
 		dev_err(&pdev->dev, "failed to get clk\n");
 		return PTR_ERR(clk);
diff --git a/include/dt-bindings/clock/mpc512x-clock.h b/include/dt-bindings/clock/mpc512x-clock.h
new file mode 100644
index 0000000..4f94919
--- /dev/null
+++ b/include/dt-bindings/clock/mpc512x-clock.h
@@ -0,0 +1,76 @@
+/*
+ * This header provides constants for MPC512x clock specs in DT bindings.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_MPC512x_CLOCK_H
+#define _DT_BINDINGS_CLOCK_MPC512x_CLOCK_H
+
+#define MPC512x_CLK_DUMMY		0
+#define MPC512x_CLK_REF			1
+#define MPC512x_CLK_SYS			2
+#define MPC512x_CLK_DIU			3
+#define MPC512x_CLK_VIU			4
+#define MPC512x_CLK_CSB			5
+#define MPC512x_CLK_E300		6
+#define MPC512x_CLK_IPS			7
+#define MPC512x_CLK_FEC			8
+#define MPC512x_CLK_SATA		9
+#define MPC512x_CLK_PATA		10
+#define MPC512x_CLK_NFC			11
+#define MPC512x_CLK_LPC			12
+#define MPC512x_CLK_MBX_BUS		13
+#define MPC512x_CLK_MBX			14
+#define MPC512x_CLK_MBX_3D		15
+#define MPC512x_CLK_AXE			16
+#define MPC512x_CLK_USB1		17
+#define MPC512x_CLK_USB2		18
+#define MPC512x_CLK_I2C			19
+#define MPC512x_CLK_MSCAN0_MCLK		20
+#define MPC512x_CLK_MSCAN1_MCLK		21
+#define MPC512x_CLK_MSCAN2_MCLK		22
+#define MPC512x_CLK_MSCAN3_MCLK		23
+#define MPC512x_CLK_BDLC		24
+#define MPC512x_CLK_SDHC		25
+#define MPC512x_CLK_PCI			26
+#define MPC512x_CLK_PSC_MCLK_IN		27
+#define MPC512x_CLK_SPDIF_TX		28
+#define MPC512x_CLK_SPDIF_RX		29
+#define MPC512x_CLK_SPDIF_MCLK		30
+#define MPC512x_CLK_SPDIF		31
+#define MPC512x_CLK_AC97		32
+#define MPC512x_CLK_PSC0_MCLK		33
+#define MPC512x_CLK_PSC1_MCLK		34
+#define MPC512x_CLK_PSC2_MCLK		35
+#define MPC512x_CLK_PSC3_MCLK		36
+#define MPC512x_CLK_PSC4_MCLK		37
+#define MPC512x_CLK_PSC5_MCLK		38
+#define MPC512x_CLK_PSC6_MCLK		39
+#define MPC512x_CLK_PSC7_MCLK		40
+#define MPC512x_CLK_PSC8_MCLK		41
+#define MPC512x_CLK_PSC9_MCLK		42
+#define MPC512x_CLK_PSC10_MCLK		43
+#define MPC512x_CLK_PSC11_MCLK		44
+#define MPC512x_CLK_PSC_FIFO		45
+#define MPC512x_CLK_PSC0		46
+#define MPC512x_CLK_PSC1		47
+#define MPC512x_CLK_PSC2		48
+#define MPC512x_CLK_PSC3		49
+#define MPC512x_CLK_PSC4		50
+#define MPC512x_CLK_PSC5		51
+#define MPC512x_CLK_PSC6		52
+#define MPC512x_CLK_PSC7		53
+#define MPC512x_CLK_PSC8		54
+#define MPC512x_CLK_PSC9		55
+#define MPC512x_CLK_PSC10		56
+#define MPC512x_CLK_PSC11		57
+#define MPC512x_CLK_SDHC2		58
+#define MPC512x_CLK_FEC2		59
+#define MPC512x_CLK_OUT0_CLK		60
+#define MPC512x_CLK_OUT1_CLK		61
+#define MPC512x_CLK_OUT2_CLK		62
+#define MPC512x_CLK_OUT3_CLK		63
+#define MPC512x_CLK_CAN_CLK_IN		64
+
+#define MPC512x_CLK_LAST_PUBLIC		64
+
+#endif
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 448b229..939533d 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -544,6 +544,20 @@
  * for improved portability across platforms
  */
 
+#if IS_ENABLED(CONFIG_PPC)
+
+static inline u32 clk_readl(u32 __iomem *reg)
+{
+	return ioread32be(reg);
+}
+
+static inline void clk_writel(u32 val, u32 __iomem *reg)
+{
+	iowrite32be(val, reg);
+}
+
+#else	/* platform dependent I/O accessors */
+
 static inline u32 clk_readl(u32 __iomem *reg)
 {
 	return readl(reg);
@@ -554,5 +568,7 @@
 	writel(val, reg);
 }
 
+#endif	/* platform dependent I/O accessors */
+
 #endif /* CONFIG_COMMON_CLK */
 #endif /* CLK_PROVIDER_H */