[ACPI] Lindent all ACPI files
Signed-off-by: Len Brown <len.brown@intel.com>
diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h
index 93c175a..67312c3 100644
--- a/include/acpi/actbl1.h
+++ b/include/acpi/actbl1.h
@@ -49,94 +49,87 @@
/*
* ACPI 1.0 Root System Description Table (RSDT)
*/
-struct rsdt_descriptor_rev1
-{
- ACPI_TABLE_HEADER_DEF /* ACPI common table header */
- u32 table_offset_entry[1]; /* Array of pointers to ACPI tables */
+struct rsdt_descriptor_rev1 {
+ ACPI_TABLE_HEADER_DEF /* ACPI common table header */
+ u32 table_offset_entry[1]; /* Array of pointers to ACPI tables */
};
-
/*
* ACPI 1.0 Firmware ACPI Control Structure (FACS)
*/
-struct facs_descriptor_rev1
-{
- char signature[4]; /* ASCII table signature */
- u32 length; /* Length of structure in bytes */
- u32 hardware_signature; /* Hardware configuration signature */
- u32 firmware_waking_vector; /* ACPI OS waking vector */
- u32 global_lock; /* Global Lock */
+struct facs_descriptor_rev1 {
+ char signature[4]; /* ASCII table signature */
+ u32 length; /* Length of structure in bytes */
+ u32 hardware_signature; /* Hardware configuration signature */
+ u32 firmware_waking_vector; /* ACPI OS waking vector */
+ u32 global_lock; /* Global Lock */
/* Flags (32 bits) */
- u8 S4bios_f : 1; /* 00: S4BIOS support is present */
- u8 : 7; /* 01-07: Reserved, must be zero */
- u8 reserved1[3]; /* 08-31: Reserved, must be zero */
+ u8 S4bios_f:1; /* 00: S4BIOS support is present */
+ u8:7; /* 01-07: Reserved, must be zero */
+ u8 reserved1[3]; /* 08-31: Reserved, must be zero */
- u8 reserved2[40]; /* Reserved, must be zero */
+ u8 reserved2[40]; /* Reserved, must be zero */
};
-
/*
* ACPI 1.0 Fixed ACPI Description Table (FADT)
*/
-struct fadt_descriptor_rev1
-{
- ACPI_TABLE_HEADER_DEF /* ACPI common table header */
- u32 firmware_ctrl; /* Physical address of FACS */
- u32 dsdt; /* Physical address of DSDT */
- u8 model; /* System Interrupt Model */
- u8 reserved1; /* Reserved, must be zero */
- u16 sci_int; /* System vector of SCI interrupt */
- u32 smi_cmd; /* Port address of SMI command port */
- u8 acpi_enable; /* Value to write to smi_cmd to enable ACPI */
- u8 acpi_disable; /* Value to write to smi_cmd to disable ACPI */
- u8 S4bios_req; /* Value to write to SMI CMD to enter S4BIOS state */
- u8 reserved2; /* Reserved, must be zero */
- u32 pm1a_evt_blk; /* Port address of Power Mgt 1a acpi_event Reg Blk */
- u32 pm1b_evt_blk; /* Port address of Power Mgt 1b acpi_event Reg Blk */
- u32 pm1a_cnt_blk; /* Port address of Power Mgt 1a Control Reg Blk */
- u32 pm1b_cnt_blk; /* Port address of Power Mgt 1b Control Reg Blk */
- u32 pm2_cnt_blk; /* Port address of Power Mgt 2 Control Reg Blk */
- u32 pm_tmr_blk; /* Port address of Power Mgt Timer Ctrl Reg Blk */
- u32 gpe0_blk; /* Port addr of General Purpose acpi_event 0 Reg Blk */
- u32 gpe1_blk; /* Port addr of General Purpose acpi_event 1 Reg Blk */
- u8 pm1_evt_len; /* Byte length of ports at pm1_x_evt_blk */
- u8 pm1_cnt_len; /* Byte length of ports at pm1_x_cnt_blk */
- u8 pm2_cnt_len; /* Byte Length of ports at pm2_cnt_blk */
- u8 pm_tm_len; /* Byte Length of ports at pm_tm_blk */
- u8 gpe0_blk_len; /* Byte Length of ports at gpe0_blk */
- u8 gpe1_blk_len; /* Byte Length of ports at gpe1_blk */
- u8 gpe1_base; /* Offset in gpe model where gpe1 events start */
- u8 reserved3; /* Reserved, must be zero */
- u16 plvl2_lat; /* Worst case HW latency to enter/exit C2 state */
- u16 plvl3_lat; /* Worst case HW latency to enter/exit C3 state */
- u16 flush_size; /* Size of area read to flush caches */
- u16 flush_stride; /* Stride used in flushing caches */
- u8 duty_offset; /* Bit location of duty cycle field in p_cnt reg */
- u8 duty_width; /* Bit width of duty cycle field in p_cnt reg */
- u8 day_alrm; /* Index to day-of-month alarm in RTC CMOS RAM */
- u8 mon_alrm; /* Index to month-of-year alarm in RTC CMOS RAM */
- u8 century; /* Index to century in RTC CMOS RAM */
- u8 reserved4[3]; /* Reserved, must be zero */
+struct fadt_descriptor_rev1 {
+ ACPI_TABLE_HEADER_DEF /* ACPI common table header */
+ u32 firmware_ctrl; /* Physical address of FACS */
+ u32 dsdt; /* Physical address of DSDT */
+ u8 model; /* System Interrupt Model */
+ u8 reserved1; /* Reserved, must be zero */
+ u16 sci_int; /* System vector of SCI interrupt */
+ u32 smi_cmd; /* Port address of SMI command port */
+ u8 acpi_enable; /* Value to write to smi_cmd to enable ACPI */
+ u8 acpi_disable; /* Value to write to smi_cmd to disable ACPI */
+ u8 S4bios_req; /* Value to write to SMI CMD to enter S4BIOS state */
+ u8 reserved2; /* Reserved, must be zero */
+ u32 pm1a_evt_blk; /* Port address of Power Mgt 1a acpi_event Reg Blk */
+ u32 pm1b_evt_blk; /* Port address of Power Mgt 1b acpi_event Reg Blk */
+ u32 pm1a_cnt_blk; /* Port address of Power Mgt 1a Control Reg Blk */
+ u32 pm1b_cnt_blk; /* Port address of Power Mgt 1b Control Reg Blk */
+ u32 pm2_cnt_blk; /* Port address of Power Mgt 2 Control Reg Blk */
+ u32 pm_tmr_blk; /* Port address of Power Mgt Timer Ctrl Reg Blk */
+ u32 gpe0_blk; /* Port addr of General Purpose acpi_event 0 Reg Blk */
+ u32 gpe1_blk; /* Port addr of General Purpose acpi_event 1 Reg Blk */
+ u8 pm1_evt_len; /* Byte length of ports at pm1_x_evt_blk */
+ u8 pm1_cnt_len; /* Byte length of ports at pm1_x_cnt_blk */
+ u8 pm2_cnt_len; /* Byte Length of ports at pm2_cnt_blk */
+ u8 pm_tm_len; /* Byte Length of ports at pm_tm_blk */
+ u8 gpe0_blk_len; /* Byte Length of ports at gpe0_blk */
+ u8 gpe1_blk_len; /* Byte Length of ports at gpe1_blk */
+ u8 gpe1_base; /* Offset in gpe model where gpe1 events start */
+ u8 reserved3; /* Reserved, must be zero */
+ u16 plvl2_lat; /* Worst case HW latency to enter/exit C2 state */
+ u16 plvl3_lat; /* Worst case HW latency to enter/exit C3 state */
+ u16 flush_size; /* Size of area read to flush caches */
+ u16 flush_stride; /* Stride used in flushing caches */
+ u8 duty_offset; /* Bit location of duty cycle field in p_cnt reg */
+ u8 duty_width; /* Bit width of duty cycle field in p_cnt reg */
+ u8 day_alrm; /* Index to day-of-month alarm in RTC CMOS RAM */
+ u8 mon_alrm; /* Index to month-of-year alarm in RTC CMOS RAM */
+ u8 century; /* Index to century in RTC CMOS RAM */
+ u8 reserved4[3]; /* Reserved, must be zero */
/* Flags (32 bits) */
- u8 wb_invd : 1; /* 00: The wbinvd instruction works properly */
- u8 wb_invd_flush : 1; /* 01: The wbinvd flushes but does not invalidate */
- u8 proc_c1 : 1; /* 02: All processors support C1 state */
- u8 plvl2_up : 1; /* 03: C2 state works on MP system */
- u8 pwr_button : 1; /* 04: Power button is handled as a generic feature */
- u8 sleep_button : 1; /* 05: Sleep button is handled as a generic feature, or not present */
- u8 fixed_rTC : 1; /* 06: RTC wakeup stat not in fixed register space */
- u8 rtcs4 : 1; /* 07: RTC wakeup stat not possible from S4 */
- u8 tmr_val_ext : 1; /* 08: tmr_val width is 32 bits (0 = 24 bits) */
- u8 : 7; /* 09-15: Reserved, must be zero */
- u8 reserved5[2]; /* 16-31: Reserved, must be zero */
+ u8 wb_invd:1; /* 00: The wbinvd instruction works properly */
+ u8 wb_invd_flush:1; /* 01: The wbinvd flushes but does not invalidate */
+ u8 proc_c1:1; /* 02: All processors support C1 state */
+ u8 plvl2_up:1; /* 03: C2 state works on MP system */
+ u8 pwr_button:1; /* 04: Power button is handled as a generic feature */
+ u8 sleep_button:1; /* 05: Sleep button is handled as a generic feature, or not present */
+ u8 fixed_rTC:1; /* 06: RTC wakeup stat not in fixed register space */
+ u8 rtcs4:1; /* 07: RTC wakeup stat not possible from S4 */
+ u8 tmr_val_ext:1; /* 08: tmr_val width is 32 bits (0 = 24 bits) */
+ u8:7; /* 09-15: Reserved, must be zero */
+ u8 reserved5[2]; /* 16-31: Reserved, must be zero */
};
#pragma pack()
-#endif /* __ACTBL1_H__ */
-
-
+#endif /* __ACTBL1_H__ */