WATCHDOG: Add watchdog driver for OCTEON SOCs
The OCTEON is a MIPS64 based SOC family with an on chip watchdog unit.
The driver is split into two source files one for the C code and one
for assembly. Assembly is needed to handle the NMI and then print the
machine state before the reboot is triggered.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Marc Zyngier <maz@misterjones.org>
Cc: Thierry Reding <thierry.reding@avionic-design.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
To: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org,
Patchwork: https://patchwork.linux-mips.org/patch/1503/
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
create mode 100644 drivers/watchdog/octeon-wdt-main.c
create mode 100644 drivers/watchdog/octeon-wdt-nmi.S
diff --git a/drivers/watchdog/octeon-wdt-nmi.S b/drivers/watchdog/octeon-wdt-nmi.S
new file mode 100644
index 0000000..8a900a5
--- /dev/null
+++ b/drivers/watchdog/octeon-wdt-nmi.S
@@ -0,0 +1,64 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 Cavium Networks
+ */
+#include <asm/asm.h>
+#include <asm/regdef.h>
+
+#define SAVE_REG(r) sd $r, -32768+6912-(32-r)*8($0)
+
+ NESTED(octeon_wdt_nmi_stage2, 0, sp)
+ .set push
+ .set noreorder
+ .set noat
+ /* Save all registers to the top CVMSEG. This shouldn't
+ * corrupt any state used by the kernel. Also all registers
+ * should have the value right before the NMI. */
+ SAVE_REG(0)
+ SAVE_REG(1)
+ SAVE_REG(2)
+ SAVE_REG(3)
+ SAVE_REG(4)
+ SAVE_REG(5)
+ SAVE_REG(6)
+ SAVE_REG(7)
+ SAVE_REG(8)
+ SAVE_REG(9)
+ SAVE_REG(10)
+ SAVE_REG(11)
+ SAVE_REG(12)
+ SAVE_REG(13)
+ SAVE_REG(14)
+ SAVE_REG(15)
+ SAVE_REG(16)
+ SAVE_REG(17)
+ SAVE_REG(18)
+ SAVE_REG(19)
+ SAVE_REG(20)
+ SAVE_REG(21)
+ SAVE_REG(22)
+ SAVE_REG(23)
+ SAVE_REG(24)
+ SAVE_REG(25)
+ SAVE_REG(26)
+ SAVE_REG(27)
+ SAVE_REG(28)
+ SAVE_REG(29)
+ SAVE_REG(30)
+ SAVE_REG(31)
+ /* Set the stack to begin right below the registers */
+ li sp, -32768+6912-32*8
+ /* Load the address of the third stage handler */
+ dla a0, octeon_wdt_nmi_stage3
+ /* Call the third stage handler */
+ jal a0
+ /* a0 is the address of the saved registers */
+ move a0, sp
+ /* Loop forvever if we get here. */
+1: b 1b
+ nop
+ .set pop
+ END(octeon_wdt_nmi_stage2)