b43: Convert usage of b43_radio_set()
This patch converts code to use the new b43_radio_set() API.
The semantic patch that makes this change is as follows:
// <smpl>
@@
expression dev, addr, set;
@@
-b43_radio_write16(dev, addr, b43_radio_read16(dev, addr) | set);
+b43_radio_set(dev, addr, set);
// </smpl>
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/b43/phy_a.c b/drivers/net/wireless/b43/phy_a.c
index 6845d12..b07df38 100644
--- a/drivers/net/wireless/b43/phy_a.c
+++ b/drivers/net/wireless/b43/phy_a.c
@@ -227,16 +227,14 @@
b43_phy_mask(dev, B43_PHY_CRS0, ~B43_PHY_CRS0_EN);
b43_phy_set(dev, B43_PHY_OFDM(0x1B), 0x1000);
b43_phy_maskset(dev, B43_PHY_OFDM(0x82), 0xF0FF, 0x0300);
- b43_radio_write16(dev, 0x0009,
- b43_radio_read16(dev, 0x0009) | 0x0080);
+ b43_radio_set(dev, 0x0009, 0x0080);
b43_radio_write16(dev, 0x0012,
(b43_radio_read16(dev, 0x0012) & 0xFFFC) | 0x0002);
b43_wa_initgains(dev);
b43_phy_write(dev, B43_PHY_OFDM(0xBA), 0x3ED5);
b = b43_phy_read(dev, B43_PHY_PWRDOWN);
b43_phy_write(dev, B43_PHY_PWRDOWN, (b & 0xFFF8) | 0x0005);
- b43_radio_write16(dev, 0x0004,
- b43_radio_read16(dev, 0x0004) | 0x0004);
+ b43_radio_set(dev, 0x0004, 0x0004);
for (i = 0x10; i <= 0x20; i++) {
b43_radio_write16(dev, 0x0013, i);
curr_s = b43_phy_read(dev, B43_PHY_OTABLEQ) & 0x00FF;
diff --git a/drivers/net/wireless/b43/phy_g.c b/drivers/net/wireless/b43/phy_g.c
index 9068eda..c8e4342 100644
--- a/drivers/net/wireless/b43/phy_g.c
+++ b/drivers/net/wireless/b43/phy_g.c
@@ -468,8 +468,8 @@
b43_phy_set(dev, 0x0060, 0x0040);
b43_phy_set(dev, 0x0014, 0x0200);
}
- b43_radio_write16(dev, 0x007A, b43_radio_read16(dev, 0x007A) | 0x0070);
- b43_radio_write16(dev, 0x007A, b43_radio_read16(dev, 0x007A) | 0x0080);
+ b43_radio_set(dev, 0x007A, 0x0070);
+ b43_radio_set(dev, 0x007A, 0x0080);
udelay(30);
v47F = (s16) ((b43_phy_read(dev, 0x047F) >> 8) & 0x003F);
@@ -512,8 +512,7 @@
b43_phy_mask(dev, 0x0815, 0xFFFB);
}
b43_phy_maskset(dev, 0x0003, 0xFF9F, 0x0040);
- b43_radio_write16(dev, 0x007A,
- b43_radio_read16(dev, 0x007A) | 0x000F);
+ b43_radio_set(dev, 0x007A, 0x000F);
b43_set_all_gains(dev, 3, 0, 1);
b43_radio_write16(dev, 0x0043, (b43_radio_read16(dev, 0x0043)
& 0x00F0) | 0x000F);
@@ -625,8 +624,7 @@
b43_phy_set(dev, 0x0060, 0x0040);
b43_phy_set(dev, 0x0014, 0x0200);
}
- b43_radio_write16(dev, 0x007A,
- b43_radio_read16(dev, 0x007A) | 0x0070);
+ b43_radio_set(dev, 0x007A, 0x0070);
b43_set_all_gains(dev, 0, 8, 0);
b43_radio_write16(dev, 0x007A,
b43_radio_read16(dev, 0x007A) & 0x00F7);
@@ -634,8 +632,7 @@
b43_phy_maskset(dev, 0x0811, 0xFFCF, 0x0030);
b43_phy_maskset(dev, 0x0812, 0xFFCF, 0x0010);
}
- b43_radio_write16(dev, 0x007A,
- b43_radio_read16(dev, 0x007A) | 0x0080);
+ b43_radio_set(dev, 0x007A, 0x0080);
udelay(20);
nrssi0 = (s16) ((b43_phy_read(dev, 0x047F) >> 8) & 0x003F);
@@ -651,8 +648,7 @@
b43_write16(dev, B43_MMIO_CHANNEL_EXT,
b43_read16(dev, B43_MMIO_CHANNEL_EXT)
| 0x2000);
- b43_radio_write16(dev, 0x007A,
- b43_radio_read16(dev, 0x007A) | 0x000F);
+ b43_radio_set(dev, 0x007A, 0x000F);
b43_phy_write(dev, 0x0015, 0xF330);
if (phy->rev >= 2) {
b43_phy_maskset(dev, 0x0812, 0xFFCF, 0x0020);
@@ -1355,8 +1351,7 @@
LPD(0, 0, 1)));
}
b43_phy_write(dev, B43_PHY_PGACTL, 0xBFA0);
- b43_radio_write16(dev, 0x51, b43_radio_read16(dev, 0x51)
- | 0x0004);
+ b43_radio_set(dev, 0x51, 0x0004);
if (phy->radio_rev == 8) {
b43_radio_write16(dev, 0x43, 0x1F);
} else {
@@ -1511,8 +1506,7 @@
u8 old_channel;
if (phy->analog == 1) {
- b43_radio_write16(dev, 0x007A, b43_radio_read16(dev, 0x007A)
- | 0x0050);
+ b43_radio_set(dev, 0x007A, 0x0050);
}
if ((bus->boardinfo.vendor != SSB_BOARDVENDOR_BCM) &&
(bus->boardinfo.type != SSB_BOARD_BU4306)) {
@@ -1528,12 +1522,8 @@
if (phy->gmode || phy->rev >= 2) {
if (phy->radio_ver == 0x2050) {
- b43_radio_write16(dev, 0x007A,
- b43_radio_read16(dev, 0x007A)
- | 0x0020);
- b43_radio_write16(dev, 0x0051,
- b43_radio_read16(dev, 0x0051)
- | 0x0004);
+ b43_radio_set(dev, 0x007A, 0x0020);
+ b43_radio_set(dev, 0x0051, 0x0004);
}
b43_write16(dev, B43_MMIO_PHY_RADIO, 0x0000);
@@ -1590,7 +1580,7 @@
b43_radio_write16(dev, 0x005B, 0x007B);
b43_radio_write16(dev, 0x005C, 0x00B0);
- b43_radio_write16(dev, 0x007A, b43_radio_read16(dev, 0x007A) | 0x0007);
+ b43_radio_set(dev, 0x007A, 0x0007);
b43_gphy_channel_switch(dev, old_channel, 0);
@@ -1666,10 +1656,8 @@
val += 0x0202;
}
if (phy->type == B43_PHYTYPE_G) {
- b43_radio_write16(dev, 0x007A,
- b43_radio_read16(dev, 0x007A) | 0x0020);
- b43_radio_write16(dev, 0x0051,
- b43_radio_read16(dev, 0x0051) | 0x0004);
+ b43_radio_set(dev, 0x007A, 0x0020);
+ b43_radio_set(dev, 0x0051, 0x0004);
b43_phy_set(dev, 0x0802, 0x0100);
b43_phy_set(dev, 0x042B, 0x2000);
b43_phy_write(dev, 0x5B, 0);
diff --git a/drivers/net/wireless/b43/wa.c b/drivers/net/wireless/b43/wa.c
index fecb86b..b0767cf 100644
--- a/drivers/net/wireless/b43/wa.c
+++ b/drivers/net/wireless/b43/wa.c
@@ -386,8 +386,7 @@
b43_phy_maskset(dev, B43_PHY_OFDM(0x1A), ~0x007F, 0x000F);
b43_phy_maskset(dev, B43_PHY_OFDM(0x1A), ~0x3F80, 0x2B80);
b43_phy_maskset(dev, B43_PHY_ANTWRSETT, 0xF0FF, 0x0300);
- b43_radio_write16(dev, 0x7A,
- b43_radio_read16(dev, 0x7A) | 0x0008);
+ b43_radio_set(dev, 0x7A, 0x0008);
b43_phy_maskset(dev, B43_PHY_N1P1GAIN, ~0x000F, 0x0008);
b43_phy_maskset(dev, B43_PHY_P1P2GAIN, ~0x0F00, 0x0600);
b43_phy_maskset(dev, B43_PHY_N1N2GAIN, ~0x0F00, 0x0700);