| # |
| # For a description of the syntax of this configuration file, |
| # see Documentation/kbuild/kconfig-language.txt. |
| # |
| |
| mainmenu "Blackfin Kernel Configuration" |
| |
| config MMU |
| bool |
| default n |
| |
| config FPU |
| bool |
| default n |
| |
| config RWSEM_GENERIC_SPINLOCK |
| bool |
| default y |
| |
| config RWSEM_XCHGADD_ALGORITHM |
| bool |
| default n |
| |
| config BLACKFIN |
| bool |
| default y |
| select HAVE_IDE |
| select HAVE_OPROFILE |
| |
| config ZONE_DMA |
| bool |
| default y |
| |
| config GENERIC_FIND_NEXT_BIT |
| bool |
| default y |
| |
| config GENERIC_HWEIGHT |
| bool |
| default y |
| |
| config GENERIC_HARDIRQS |
| bool |
| default y |
| |
| config GENERIC_IRQ_PROBE |
| bool |
| default y |
| |
| config GENERIC_TIME |
| bool |
| default n |
| |
| config GENERIC_GPIO |
| bool |
| default y |
| |
| config FORCE_MAX_ZONEORDER |
| int |
| default "14" |
| |
| config GENERIC_CALIBRATE_DELAY |
| bool |
| default y |
| |
| config HARDWARE_PM |
| def_bool y |
| depends on OPROFILE |
| |
| source "init/Kconfig" |
| source "kernel/Kconfig.preempt" |
| |
| menu "Blackfin Processor Options" |
| |
| comment "Processor and Board Settings" |
| |
| choice |
| prompt "CPU" |
| default BF533 |
| |
| config BF522 |
| bool "BF522" |
| help |
| BF522 Processor Support. |
| |
| config BF523 |
| bool "BF523" |
| help |
| BF523 Processor Support. |
| |
| config BF524 |
| bool "BF524" |
| help |
| BF524 Processor Support. |
| |
| config BF525 |
| bool "BF525" |
| help |
| BF525 Processor Support. |
| |
| config BF526 |
| bool "BF526" |
| help |
| BF526 Processor Support. |
| |
| config BF527 |
| bool "BF527" |
| help |
| BF527 Processor Support. |
| |
| config BF531 |
| bool "BF531" |
| help |
| BF531 Processor Support. |
| |
| config BF532 |
| bool "BF532" |
| help |
| BF532 Processor Support. |
| |
| config BF533 |
| bool "BF533" |
| help |
| BF533 Processor Support. |
| |
| config BF534 |
| bool "BF534" |
| help |
| BF534 Processor Support. |
| |
| config BF536 |
| bool "BF536" |
| help |
| BF536 Processor Support. |
| |
| config BF537 |
| bool "BF537" |
| help |
| BF537 Processor Support. |
| |
| config BF542 |
| bool "BF542" |
| help |
| BF542 Processor Support. |
| |
| config BF544 |
| bool "BF544" |
| help |
| BF544 Processor Support. |
| |
| config BF547 |
| bool "BF547" |
| help |
| BF547 Processor Support. |
| |
| config BF548 |
| bool "BF548" |
| help |
| BF548 Processor Support. |
| |
| config BF549 |
| bool "BF549" |
| help |
| BF549 Processor Support. |
| |
| config BF561 |
| bool "BF561" |
| help |
| Not Supported Yet - Work in progress - BF561 Processor Support. |
| |
| endchoice |
| |
| choice |
| prompt "Silicon Rev" |
| default BF_REV_0_1 if BF527 |
| default BF_REV_0_2 if BF537 |
| default BF_REV_0_3 if BF533 |
| default BF_REV_0_0 if BF549 |
| |
| config BF_REV_0_0 |
| bool "0.0" |
| depends on (BF52x || BF54x) |
| |
| config BF_REV_0_1 |
| bool "0.1" |
| depends on (BF52x || BF54x) |
| |
| config BF_REV_0_2 |
| bool "0.2" |
| depends on (BF537 || BF536 || BF534) |
| |
| config BF_REV_0_3 |
| bool "0.3" |
| depends on (BF561 || BF537 || BF536 || BF534 || BF533 || BF532 || BF531) |
| |
| config BF_REV_0_4 |
| bool "0.4" |
| depends on (BF561 || BF533 || BF532 || BF531) |
| |
| config BF_REV_0_5 |
| bool "0.5" |
| depends on (BF561 || BF533 || BF532 || BF531) |
| |
| config BF_REV_ANY |
| bool "any" |
| |
| config BF_REV_NONE |
| bool "none" |
| |
| endchoice |
| |
| config BF52x |
| bool |
| depends on (BF522 || BF523 || BF524 || BF525 || BF526 || BF527) |
| default y |
| |
| config BF53x |
| bool |
| depends on (BF531 || BF532 || BF533 || BF534 || BF536 || BF537) |
| default y |
| |
| config BF54x |
| bool |
| depends on (BF542 || BF544 || BF547 || BF548 || BF549) |
| default y |
| |
| config BFIN_DUAL_CORE |
| bool |
| depends on (BF561) |
| default y |
| |
| config BFIN_SINGLE_CORE |
| bool |
| depends on !BFIN_DUAL_CORE |
| default y |
| |
| config MEM_GENERIC_BOARD |
| bool |
| depends on GENERIC_BOARD |
| default y |
| |
| config MEM_MT48LC64M4A2FB_7E |
| bool |
| depends on (BFIN533_STAMP) |
| default y |
| |
| config MEM_MT48LC16M16A2TG_75 |
| bool |
| depends on (BFIN533_EZKIT || BFIN561_EZKIT \ |
| || BFIN533_BLUETECHNIX_CM || BFIN537_BLUETECHNIX_CM \ |
| || H8606_HVSISTEMAS) |
| default y |
| |
| config MEM_MT48LC32M8A2_75 |
| bool |
| depends on (BFIN537_STAMP || PNAV10) |
| default y |
| |
| config MEM_MT48LC8M32B2B5_7 |
| bool |
| depends on (BFIN561_BLUETECHNIX_CM) |
| default y |
| |
| config MEM_MT48LC32M16A2TG_75 |
| bool |
| depends on (BFIN527_EZKIT) |
| default y |
| |
| source "arch/blackfin/mach-bf527/Kconfig" |
| source "arch/blackfin/mach-bf533/Kconfig" |
| source "arch/blackfin/mach-bf561/Kconfig" |
| source "arch/blackfin/mach-bf537/Kconfig" |
| source "arch/blackfin/mach-bf548/Kconfig" |
| |
| menu "Board customizations" |
| |
| config CMDLINE_BOOL |
| bool "Default bootloader kernel arguments" |
| |
| config CMDLINE |
| string "Initial kernel command string" |
| depends on CMDLINE_BOOL |
| default "console=ttyBF0,57600" |
| help |
| If you don't have a boot loader capable of passing a command line string |
| to the kernel, you may specify one here. As a minimum, you should specify |
| the memory size and the root device (e.g., mem=8M, root=/dev/nfs). |
| |
| comment "Clock/PLL Setup" |
| |
| config CLKIN_HZ |
| int "Crystal Frequency in Hz" |
| default "11059200" if BFIN533_STAMP |
| default "27000000" if BFIN533_EZKIT |
| default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS) |
| default "30000000" if BFIN561_EZKIT |
| default "24576000" if PNAV10 |
| help |
| The frequency of CLKIN crystal oscillator on the board in Hz. |
| |
| config BFIN_KERNEL_CLOCK |
| bool "Re-program Clocks while Kernel boots?" |
| default n |
| help |
| This option decides if kernel clocks are re-programed from the |
| bootloader settings. If the clocks are not set, the SDRAM settings |
| are also not changed, and the Bootloader does 100% of the hardware |
| configuration. |
| |
| config PLL_BYPASS |
| bool "Bypass PLL" |
| depends on BFIN_KERNEL_CLOCK |
| default n |
| |
| config CLKIN_HALF |
| bool "Half Clock In" |
| depends on BFIN_KERNEL_CLOCK && (! PLL_BYPASS) |
| default n |
| help |
| If this is set the clock will be divided by 2, before it goes to the PLL. |
| |
| config VCO_MULT |
| int "VCO Multiplier" |
| depends on BFIN_KERNEL_CLOCK && (! PLL_BYPASS) |
| range 1 64 |
| default "22" if BFIN533_EZKIT |
| default "45" if BFIN533_STAMP |
| default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT) |
| default "22" if BFIN533_BLUETECHNIX_CM |
| default "20" if BFIN537_BLUETECHNIX_CM |
| default "20" if BFIN561_BLUETECHNIX_CM |
| default "20" if BFIN561_EZKIT |
| default "16" if H8606_HVSISTEMAS |
| help |
| This controls the frequency of the on-chip PLL. This can be between 1 and 64. |
| PLL Frequency = (Crystal Frequency) * (this setting) |
| |
| choice |
| prompt "Core Clock Divider" |
| depends on BFIN_KERNEL_CLOCK |
| default CCLK_DIV_1 |
| help |
| This sets the frequency of the core. It can be 1, 2, 4 or 8 |
| Core Frequency = (PLL frequency) / (this setting) |
| |
| config CCLK_DIV_1 |
| bool "1" |
| |
| config CCLK_DIV_2 |
| bool "2" |
| |
| config CCLK_DIV_4 |
| bool "4" |
| |
| config CCLK_DIV_8 |
| bool "8" |
| endchoice |
| |
| config SCLK_DIV |
| int "System Clock Divider" |
| depends on BFIN_KERNEL_CLOCK |
| range 1 15 |
| default 5 if BFIN533_EZKIT |
| default 5 if BFIN533_STAMP |
| default 4 if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT) |
| default 5 if BFIN533_BLUETECHNIX_CM |
| default 4 if BFIN537_BLUETECHNIX_CM |
| default 4 if BFIN561_BLUETECHNIX_CM |
| default 5 if BFIN561_EZKIT |
| default 3 if H8606_HVSISTEMAS |
| help |
| This sets the frequency of the system clock (including SDRAM or DDR). |
| This can be between 1 and 15 |
| System Clock = (PLL frequency) / (this setting) |
| |
| # |
| # Max & Min Speeds for various Chips |
| # |
| config MAX_VCO_HZ |
| int |
| default 600000000 if BF522 |
| default 400000000 if BF523 |
| default 400000000 if BF524 |
| default 600000000 if BF525 |
| default 400000000 if BF526 |
| default 600000000 if BF527 |
| default 400000000 if BF531 |
| default 400000000 if BF532 |
| default 750000000 if BF533 |
| default 500000000 if BF534 |
| default 400000000 if BF536 |
| default 600000000 if BF537 |
| default 533333333 if BF538 |
| default 533333333 if BF539 |
| default 600000000 if BF542 |
| default 533333333 if BF544 |
| default 600000000 if BF547 |
| default 600000000 if BF548 |
| default 533333333 if BF549 |
| default 600000000 if BF561 |
| |
| config MIN_VCO_HZ |
| int |
| default 50000000 |
| |
| config MAX_SCLK_HZ |
| int |
| default 133333333 |
| |
| config MIN_SCLK_HZ |
| int |
| default 27000000 |
| |
| comment "Kernel Timer/Scheduler" |
| |
| source kernel/Kconfig.hz |
| |
| comment "Memory Setup" |
| |
| config MEM_SIZE |
| int "SDRAM Memory Size in MBytes" |
| default 32 if BFIN533_EZKIT |
| default 64 if BFIN527_EZKIT |
| default 64 if BFIN537_STAMP |
| default 64 if BFIN548_EZKIT |
| default 64 if BFIN561_EZKIT |
| default 128 if BFIN533_STAMP |
| default 64 if PNAV10 |
| default 32 if H8606_HVSISTEMAS |
| |
| config MEM_ADD_WIDTH |
| int "SDRAM Memory Address Width" |
| depends on (!BF54x) |
| default 9 if BFIN533_EZKIT |
| default 9 if BFIN561_EZKIT |
| default 9 if H8606_HVSISTEMAS |
| default 10 if BFIN527_EZKIT |
| default 10 if BFIN537_STAMP |
| default 11 if BFIN533_STAMP |
| default 10 if PNAV10 |
| |
| |
| choice |
| prompt "DDR SDRAM Chip Type" |
| depends on BFIN548_EZKIT |
| default MEM_MT46V32M16_5B |
| |
| config MEM_MT46V32M16_6T |
| bool "MT46V32M16_6T" |
| |
| config MEM_MT46V32M16_5B |
| bool "MT46V32M16_5B" |
| endchoice |
| |
| config ENET_FLASH_PIN |
| int "PF port/pin used for flash and ethernet sharing" |
| depends on (BFIN533_STAMP) |
| default 0 |
| help |
| PF port/pin used for flash and ethernet sharing to allow other PF |
| pins to be used on other platforms without having to touch common |
| code. |
| For example: PF0 --> 0,PF1 --> 1,PF2 --> 2, etc. |
| |
| config BOOT_LOAD |
| hex "Kernel load address for booting" |
| default "0x1000" |
| range 0x1000 0x20000000 |
| help |
| This option allows you to set the load address of the kernel. |
| This can be useful if you are on a board which has a small amount |
| of memory or you wish to reserve some memory at the beginning of |
| the address space. |
| |
| Note that you need to keep this value above 4k (0x1000) as this |
| memory region is used to capture NULL pointer references as well |
| as some core kernel functions. |
| |
| choice |
| prompt "Blackfin Exception Scratch Register" |
| default BFIN_SCRATCH_REG_RETN |
| help |
| Select the resource to reserve for the Exception handler: |
| - RETN: Non-Maskable Interrupt (NMI) |
| - RETE: Exception Return (JTAG/ICE) |
| - CYCLES: Performance counter |
| |
| If you are unsure, please select "RETN". |
| |
| config BFIN_SCRATCH_REG_RETN |
| bool "RETN" |
| help |
| Use the RETN register in the Blackfin exception handler |
| as a stack scratch register. This means you cannot |
| safely use NMI on the Blackfin while running Linux, but |
| you can debug the system with a JTAG ICE and use the |
| CYCLES performance registers. |
| |
| If you are unsure, please select "RETN". |
| |
| config BFIN_SCRATCH_REG_RETE |
| bool "RETE" |
| help |
| Use the RETE register in the Blackfin exception handler |
| as a stack scratch register. This means you cannot |
| safely use a JTAG ICE while debugging a Blackfin board, |
| but you can safely use the CYCLES performance registers |
| and the NMI. |
| |
| If you are unsure, please select "RETN". |
| |
| config BFIN_SCRATCH_REG_CYCLES |
| bool "CYCLES" |
| help |
| Use the CYCLES register in the Blackfin exception handler |
| as a stack scratch register. This means you cannot |
| safely use the CYCLES performance registers on a Blackfin |
| board at anytime, but you can debug the system with a JTAG |
| ICE and use the NMI. |
| |
| If you are unsure, please select "RETN". |
| |
| endchoice |
| |
| endmenu |
| |
| |
| menu "Blackfin Kernel Optimizations" |
| |
| comment "Memory Optimizations" |
| |
| config I_ENTRY_L1 |
| bool "Locate interrupt entry code in L1 Memory" |
| default y |
| help |
| If enabled, interrupt entry code (STORE/RESTORE CONTEXT) is linked |
| into L1 instruction memory. (less latency) |
| |
| config EXCPT_IRQ_SYSC_L1 |
| bool "Locate entire ASM lowlevel exception / interrupt - Syscall and CPLB handler code in L1 Memory" |
| default y |
| help |
| If enabled, the entire ASM lowlevel exception and interrupt entry code |
| (STORE/RESTORE CONTEXT) is linked into L1 instruction memory. |
| (less latency) |
| |
| config DO_IRQ_L1 |
| bool "Locate frequently called do_irq dispatcher function in L1 Memory" |
| default y |
| help |
| If enabled, the frequently called do_irq dispatcher function is linked |
| into L1 instruction memory. (less latency) |
| |
| config CORE_TIMER_IRQ_L1 |
| bool "Locate frequently called timer_interrupt() function in L1 Memory" |
| default y |
| help |
| If enabled, the frequently called timer_interrupt() function is linked |
| into L1 instruction memory. (less latency) |
| |
| config IDLE_L1 |
| bool "Locate frequently idle function in L1 Memory" |
| default y |
| help |
| If enabled, the frequently called idle function is linked |
| into L1 instruction memory. (less latency) |
| |
| config SCHEDULE_L1 |
| bool "Locate kernel schedule function in L1 Memory" |
| default y |
| help |
| If enabled, the frequently called kernel schedule is linked |
| into L1 instruction memory. (less latency) |
| |
| config ARITHMETIC_OPS_L1 |
| bool "Locate kernel owned arithmetic functions in L1 Memory" |
| default y |
| help |
| If enabled, arithmetic functions are linked |
| into L1 instruction memory. (less latency) |
| |
| config ACCESS_OK_L1 |
| bool "Locate access_ok function in L1 Memory" |
| default y |
| help |
| If enabled, the access_ok function is linked |
| into L1 instruction memory. (less latency) |
| |
| config MEMSET_L1 |
| bool "Locate memset function in L1 Memory" |
| default y |
| help |
| If enabled, the memset function is linked |
| into L1 instruction memory. (less latency) |
| |
| config MEMCPY_L1 |
| bool "Locate memcpy function in L1 Memory" |
| default y |
| help |
| If enabled, the memcpy function is linked |
| into L1 instruction memory. (less latency) |
| |
| config SYS_BFIN_SPINLOCK_L1 |
| bool "Locate sys_bfin_spinlock function in L1 Memory" |
| default y |
| help |
| If enabled, sys_bfin_spinlock function is linked |
| into L1 instruction memory. (less latency) |
| |
| config IP_CHECKSUM_L1 |
| bool "Locate IP Checksum function in L1 Memory" |
| default n |
| help |
| If enabled, the IP Checksum function is linked |
| into L1 instruction memory. (less latency) |
| |
| config CACHELINE_ALIGNED_L1 |
| bool "Locate cacheline_aligned data to L1 Data Memory" |
| default y if !BF54x |
| default n if BF54x |
| depends on !BF531 |
| help |
| If enabled, cacheline_anligned data is linked |
| into L1 data memory. (less latency) |
| |
| config SYSCALL_TAB_L1 |
| bool "Locate Syscall Table L1 Data Memory" |
| default n |
| depends on !BF531 |
| help |
| If enabled, the Syscall LUT is linked |
| into L1 data memory. (less latency) |
| |
| config CPLB_SWITCH_TAB_L1 |
| bool "Locate CPLB Switch Tables L1 Data Memory" |
| default n |
| depends on !BF531 |
| help |
| If enabled, the CPLB Switch Tables are linked |
| into L1 data memory. (less latency) |
| |
| endmenu |
| |
| |
| choice |
| prompt "Kernel executes from" |
| help |
| Choose the memory type that the kernel will be running in. |
| |
| config RAMKERNEL |
| bool "RAM" |
| help |
| The kernel will be resident in RAM when running. |
| |
| config ROMKERNEL |
| bool "ROM" |
| help |
| The kernel will be resident in FLASH/ROM when running. |
| |
| endchoice |
| |
| source "mm/Kconfig" |
| |
| config LARGE_ALLOCS |
| bool "Allow allocating large blocks (> 1MB) of memory" |
| help |
| Allow the slab memory allocator to keep chains for very large |
| memory sizes - upto 32MB. You may need this if your system has |
| a lot of RAM, and you need to able to allocate very large |
| contiguous chunks. If unsure, say N. |
| |
| config BFIN_GPTIMERS |
| tristate "Enable Blackfin General Purpose Timers API" |
| default n |
| help |
| Enable support for the General Purpose Timers API. If you |
| are unsure, say N. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called gptimers.ko. |
| |
| config BFIN_DMA_5XX |
| bool "Enable DMA Support" |
| depends on (BF52x || BF53x || BF561 || BF54x) |
| default y |
| help |
| DMA driver for BF5xx. |
| |
| choice |
| prompt "Uncached SDRAM region" |
| default DMA_UNCACHED_1M |
| depends on BFIN_DMA_5XX |
| config DMA_UNCACHED_2M |
| bool "Enable 2M DMA region" |
| config DMA_UNCACHED_1M |
| bool "Enable 1M DMA region" |
| config DMA_UNCACHED_NONE |
| bool "Disable DMA region" |
| endchoice |
| |
| |
| comment "Cache Support" |
| config BFIN_ICACHE |
| bool "Enable ICACHE" |
| config BFIN_DCACHE |
| bool "Enable DCACHE" |
| config BFIN_DCACHE_BANKA |
| bool "Enable only 16k BankA DCACHE - BankB is SRAM" |
| depends on BFIN_DCACHE && !BF531 |
| default n |
| config BFIN_ICACHE_LOCK |
| bool "Enable Instruction Cache Locking" |
| |
| choice |
| prompt "Policy" |
| depends on BFIN_DCACHE |
| default BFIN_WB |
| config BFIN_WB |
| bool "Write back" |
| help |
| Write Back Policy: |
| Cached data will be written back to SDRAM only when needed. |
| This can give a nice increase in performance, but beware of |
| broken drivers that do not properly invalidate/flush their |
| cache. |
| |
| Write Through Policy: |
| Cached data will always be written back to SDRAM when the |
| cache is updated. This is a completely safe setting, but |
| performance is worse than Write Back. |
| |
| If you are unsure of the options and you want to be safe, |
| then go with Write Through. |
| |
| config BFIN_WT |
| bool "Write through" |
| help |
| Write Back Policy: |
| Cached data will be written back to SDRAM only when needed. |
| This can give a nice increase in performance, but beware of |
| broken drivers that do not properly invalidate/flush their |
| cache. |
| |
| Write Through Policy: |
| Cached data will always be written back to SDRAM when the |
| cache is updated. This is a completely safe setting, but |
| performance is worse than Write Back. |
| |
| If you are unsure of the options and you want to be safe, |
| then go with Write Through. |
| |
| endchoice |
| |
| config L1_MAX_PIECE |
| int "Set the max L1 SRAM pieces" |
| default 16 |
| help |
| Set the max memory pieces for the L1 SRAM allocation algorithm. |
| Min value is 16. Max value is 1024. |
| |
| |
| config MPU |
| bool "Enable the memory protection unit (EXPERIMENTAL)" |
| default n |
| help |
| Use the processor's MPU to protect applications from accessing |
| memory they do not own. This comes at a performance penalty |
| and is recommended only for debugging. |
| |
| comment "Asynchonous Memory Configuration" |
| |
| menu "EBIU_AMGCTL Global Control" |
| config C_AMCKEN |
| bool "Enable CLKOUT" |
| default y |
| |
| config C_CDPRIO |
| bool "DMA has priority over core for ext. accesses" |
| default n |
| |
| config C_B0PEN |
| depends on BF561 |
| bool "Bank 0 16 bit packing enable" |
| default y |
| |
| config C_B1PEN |
| depends on BF561 |
| bool "Bank 1 16 bit packing enable" |
| default y |
| |
| config C_B2PEN |
| depends on BF561 |
| bool "Bank 2 16 bit packing enable" |
| default y |
| |
| config C_B3PEN |
| depends on BF561 |
| bool "Bank 3 16 bit packing enable" |
| default n |
| |
| choice |
| prompt"Enable Asynchonous Memory Banks" |
| default C_AMBEN_ALL |
| |
| config C_AMBEN |
| bool "Disable All Banks" |
| |
| config C_AMBEN_B0 |
| bool "Enable Bank 0" |
| |
| config C_AMBEN_B0_B1 |
| bool "Enable Bank 0 & 1" |
| |
| config C_AMBEN_B0_B1_B2 |
| bool "Enable Bank 0 & 1 & 2" |
| |
| config C_AMBEN_ALL |
| bool "Enable All Banks" |
| endchoice |
| endmenu |
| |
| menu "EBIU_AMBCTL Control" |
| config BANK_0 |
| hex "Bank 0" |
| default 0x7BB0 |
| |
| config BANK_1 |
| hex "Bank 1" |
| default 0x7BB0 |
| |
| config BANK_2 |
| hex "Bank 2" |
| default 0x7BB0 |
| |
| config BANK_3 |
| hex "Bank 3" |
| default 0x99B3 |
| endmenu |
| |
| config EBIU_MBSCTLVAL |
| hex "EBIU Bank Select Control Register" |
| depends on BF54x |
| default 0 |
| |
| config EBIU_MODEVAL |
| hex "Flash Memory Mode Control Register" |
| depends on BF54x |
| default 1 |
| |
| config EBIU_FCTLVAL |
| hex "Flash Memory Bank Control Register" |
| depends on BF54x |
| default 6 |
| endmenu |
| |
| ############################################################################# |
| menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)" |
| |
| config PCI |
| bool "PCI support" |
| help |
| Support for PCI bus. |
| |
| source "drivers/pci/Kconfig" |
| |
| config HOTPLUG |
| bool "Support for hot-pluggable device" |
| help |
| Say Y here if you want to plug devices into your computer while |
| the system is running, and be able to use them quickly. In many |
| cases, the devices can likewise be unplugged at any time too. |
| |
| One well known example of this is PCMCIA- or PC-cards, credit-card |
| size devices such as network cards, modems or hard drives which are |
| plugged into slots found on all modern laptop computers. Another |
| example, used on modern desktops as well as laptops, is USB. |
| |
| Enable HOTPLUG and KMOD, and build a modular kernel. Get agent |
| software (at <http://linux-hotplug.sourceforge.net/>) and install it. |
| Then your kernel will automatically call out to a user mode "policy |
| agent" (/sbin/hotplug) to load modules and set up software needed |
| to use devices as you hotplug them. |
| |
| source "drivers/pcmcia/Kconfig" |
| |
| source "drivers/pci/hotplug/Kconfig" |
| |
| endmenu |
| |
| menu "Executable file formats" |
| |
| source "fs/Kconfig.binfmt" |
| |
| endmenu |
| |
| menu "Power management options" |
| source "kernel/power/Kconfig" |
| |
| config ARCH_SUSPEND_POSSIBLE |
| def_bool y |
| depends on !SMP |
| |
| choice |
| prompt "Default Power Saving Mode" |
| depends on PM |
| default PM_BFIN_SLEEP_DEEPER |
| config PM_BFIN_SLEEP_DEEPER |
| bool "Sleep Deeper" |
| help |
| Sleep "Deeper" Mode (High Power Savings) - This mode reduces dynamic |
| power dissipation by disabling the clock to the processor core (CCLK). |
| Furthermore, Standby sets the internal power supply voltage (VDDINT) |
| to 0.85 V to provide the greatest power savings, while preserving the |
| processor state. |
| The PLL and system clock (SCLK) continue to operate at a very low |
| frequency of about 3.3 MHz. To preserve data integrity in the SDRAM, |
| the SDRAM is put into Self Refresh Mode. Typically an external event |
| such as GPIO interrupt or RTC activity wakes up the processor. |
| Various Peripherals such as UART, SPORT, PPI may not function as |
| normal during Sleep Deeper, due to the reduced SCLK frequency. |
| When in the sleep mode, system DMA access to L1 memory is not supported. |
| |
| config PM_BFIN_SLEEP |
| bool "Sleep" |
| help |
| Sleep Mode (High Power Savings) - The sleep mode reduces power |
| dissipation by disabling the clock to the processor core (CCLK). |
| The PLL and system clock (SCLK), however, continue to operate in |
| this mode. Typically an external event or RTC activity will wake |
| up the processor. When in the sleep mode, |
| system DMA access to L1 memory is not supported. |
| endchoice |
| |
| config PM_WAKEUP_BY_GPIO |
| bool "Cause Wakeup Event by GPIO" |
| |
| config PM_WAKEUP_GPIO_NUMBER |
| int "Wakeup GPIO number" |
| range 0 47 |
| depends on PM_WAKEUP_BY_GPIO |
| default 2 if BFIN537_STAMP |
| |
| choice |
| prompt "GPIO Polarity" |
| depends on PM_WAKEUP_BY_GPIO |
| default PM_WAKEUP_GPIO_POLAR_H |
| config PM_WAKEUP_GPIO_POLAR_H |
| bool "Active High" |
| config PM_WAKEUP_GPIO_POLAR_L |
| bool "Active Low" |
| config PM_WAKEUP_GPIO_POLAR_EDGE_F |
| bool "Falling EDGE" |
| config PM_WAKEUP_GPIO_POLAR_EDGE_R |
| bool "Rising EDGE" |
| config PM_WAKEUP_GPIO_POLAR_EDGE_B |
| bool "Both EDGE" |
| endchoice |
| |
| endmenu |
| |
| if (BF537 || BF533 || BF54x) |
| |
| menu "CPU Frequency scaling" |
| |
| source "drivers/cpufreq/Kconfig" |
| |
| config CPU_FREQ |
| bool |
| default n |
| help |
| If you want to enable this option, you should select the |
| DPMC driver from Character Devices. |
| endmenu |
| |
| endif |
| |
| source "net/Kconfig" |
| |
| source "drivers/Kconfig" |
| |
| source "fs/Kconfig" |
| |
| source "arch/blackfin/Kconfig.debug" |
| |
| source "security/Kconfig" |
| |
| source "crypto/Kconfig" |
| |
| source "lib/Kconfig" |