Merge tag 'devicetree-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull Devicetree updates from Rob Herring:
- Remove an obsolete hack for PPC32 longtrail systems
- Make of_io_request_and_map() "name" arg optional
- Add vendor prefixes for bitmain, Asus, and Y Soft
- Remove 'interrupt-parent' from bindings as it is implicit
- New properties for wm8994 audio codec
- Add 'clocks' property support to SRAM binding
- Add binding for ASPEED coprocessor interrupt controller
- Various binding spelling and link fixes
* tag 'devicetree-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
Documentation: remove dynamic-resolution-notes reference to non-existent file
dt-bindings: Add Y Soft Corporation vendor prefix
of/fdt: Remove PPC32 longtrail hack in memory scan
dt-bindings: remove 'interrupt-parent' from bindings
pinctrl: tegra: fix spelling in devicetree binding document
usb: dwc3: rockchip: Fix PHY documentation links.
dt-bindings: sound: wm8994: document wlf,csnaddr-pd property
dt-bindings: sound: wm8994: document wlf,spkmode-pu property
dt-bindings: sram: Add 'clocks' as an optional property
dt-bindings: Add vendor prefix for AsusTek Computer Inc.
dt-bindings: misc: ASPEED coprocessor interrupt controller
dt-bindings: gpio: pca953x: Document interrupts, update example
drivers/of: Make of_io_request_and_map() "name" argument optional
dt-bindings: Add bitmain vendor prefix
Documentation: devicetree: tilcdc: fix spelling mistake "suppors" -> "supports"
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-ir.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-ir.txt
index 669808b2a..6dd6f39 100644
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-ir.txt
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-ir.txt
@@ -18,9 +18,6 @@
assignment of the interrupt router is required.
Flags get passed only when using GIC as parent. Flags
encoding as documented by the GIC bindings.
-- interrupt-parent: Should be the phandle for the interrupt controller of
- the CPU the device tree is intended to be used on. This
- is either the node of the GIC or NVIC controller.
Example:
mscm_ir: interrupt-controller@40001800 {
diff --git a/Documentation/devicetree/bindings/arm/omap/crossbar.txt b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
index ecb360e..4cd5d87 100644
--- a/Documentation/devicetree/bindings/arm/omap/crossbar.txt
+++ b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
@@ -10,7 +10,6 @@
- compatible : Should be "ti,irq-crossbar"
- reg: Base address and the size of the crossbar registers.
- interrupt-controller: indicates that this block is an interrupt controller.
-- interrupt-parent: the interrupt controller this block is connected to.
- ti,max-irqs: Total number of irqs available at the parent interrupt controller.
- ti,max-crossbar-sources: Maximum number of crossbar sources that can be routed.
- ti,reg-size: Size of a individual register in bytes. Every individual
diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt b/Documentation/devicetree/bindings/arm/samsung/pmu.txt
index 1668578..433bfd7 100644
--- a/Documentation/devicetree/bindings/arm/samsung/pmu.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/pmu.txt
@@ -40,9 +40,6 @@
- #interrupt-cells: must be identical to the that of the parent interrupt
controller.
-- interrupt-parent: a phandle indicating which interrupt controller
- this PMU signals interrupts to.
-
Optional nodes:
diff --git a/Documentation/devicetree/bindings/ata/fsl-sata.txt b/Documentation/devicetree/bindings/ata/fsl-sata.txt
index b46bcf4..fd63bb3 100644
--- a/Documentation/devicetree/bindings/ata/fsl-sata.txt
+++ b/Documentation/devicetree/bindings/ata/fsl-sata.txt
@@ -16,7 +16,6 @@
4 for controller @ 0x1b000
Optional properties:
-- interrupt-parent : optional, if needed for interrupt mapping
- reg : <registers mapping>
Example:
diff --git a/Documentation/devicetree/bindings/ata/pata-arasan.txt b/Documentation/devicetree/bindings/ata/pata-arasan.txt
index 2aff154..872edc1 100644
--- a/Documentation/devicetree/bindings/ata/pata-arasan.txt
+++ b/Documentation/devicetree/bindings/ata/pata-arasan.txt
@@ -3,8 +3,6 @@
Required properties:
- compatible: "arasan,cf-spear1340"
- reg: Address range of the CF registers
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
- interrupt: Should contain the CF interrupt number
- clock-frequency: Interface clock rate, in Hz, one of
25000000
diff --git a/Documentation/devicetree/bindings/board/fsl-board.txt b/Documentation/devicetree/bindings/board/fsl-board.txt
index fb7b03e..eb52f6b 100644
--- a/Documentation/devicetree/bindings/board/fsl-board.txt
+++ b/Documentation/devicetree/bindings/board/fsl-board.txt
@@ -29,7 +29,6 @@
- reg: should contain the address and the length of the FPGA register set.
Optional properties:
-- interrupt-parent: should specify phandle for the interrupt controller.
- interrupts: should specify event (wakeup) IRQ.
Example (P1022DS):
diff --git a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt
index 8a6c3c2..729def6 100644
--- a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt
+++ b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt
@@ -9,8 +9,6 @@
"brcm,bcm7400-gisb-arb" for older 40nm chips and all 65nm chips
"brcm,bcm7038-gisb-arb" for 130nm chips
- reg: specifies the base physical address and size of the registers
-- interrupt-parent: specifies the phandle to the parent interrupt controller
- this arbiter gets interrupt line from
- interrupts: specifies the two interrupts (timeout and TEA) to be used from
the parent interrupt controller
diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt
index 51c259a..33fe9591 100644
--- a/Documentation/devicetree/bindings/clock/at91-clock.txt
+++ b/Documentation/devicetree/bindings/clock/at91-clock.txt
@@ -180,7 +180,6 @@
};
Required properties for main clock internal RC oscillator:
-- interrupt-parent : must reference the PMC node.
- interrupts : shall be set to "<0>".
- clock-frequency : define the internal RC oscillator frequency.
@@ -197,7 +196,6 @@
};
Required properties for main clock oscillator:
-- interrupt-parent : must reference the PMC node.
- interrupts : shall be set to "<0>".
- #clock-cells : from common clock binding; shall be set to 0.
- clocks : shall encode the main osc source clk sources (see atmel datasheet).
@@ -218,7 +216,6 @@
};
Required properties for main clock:
-- interrupt-parent : must reference the PMC node.
- interrupts : shall be set to "<0>".
- #clock-cells : from common clock binding; shall be set to 0.
- clocks : shall encode the main clk sources (see atmel datasheet).
@@ -233,7 +230,6 @@
};
Required properties for master clock:
-- interrupt-parent : must reference the PMC node.
- interrupts : shall be set to "<3>".
- #clock-cells : from common clock binding; shall be set to 0.
- clocks : shall be the master clock sources (see atmel datasheet) phandles.
@@ -292,7 +288,6 @@
Required properties for pll clocks:
-- interrupt-parent : must reference the PMC node.
- interrupts : shall be set to "<1>".
- #clock-cells : from common clock binding; shall be set to 0.
- clocks : shall be the main clock phandle.
@@ -348,7 +343,6 @@
};
Required properties for programmable clocks:
-- interrupt-parent : must reference the PMC node.
- #size-cells : shall be 0 (reg is used to encode clk id).
- #address-cells : shall be 1 (reg is used to encode clk id).
- clocks : shall be the programmable clock source phandles.
@@ -451,7 +445,6 @@
Required properties for utmi clock:
-- interrupt-parent : must reference the PMC node.
- interrupts : shall be set to "<AT91_PMC_LOCKU IRQ_TYPE_LEVEL_HIGH>".
- #clock-cells : from common clock binding; shall be set to 0.
- clocks : shall be the main clock source phandle.
diff --git a/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt b/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
index af23857..73470ec 100644
--- a/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
+++ b/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
@@ -29,8 +29,6 @@
- reg: Specifies base physical address and size of the registers.
- interrupts: The interrupt that the AVS CPU will use to interrupt the host
when a command completed.
-- interrupt-parent: The interrupt controller the above interrupt is routed
- through.
- interrupt-names: The name of the interrupt used to interrupt the host.
Optional properties:
diff --git a/Documentation/devicetree/bindings/crypto/amd-ccp.txt b/Documentation/devicetree/bindings/crypto/amd-ccp.txt
index 8c61183..d87579d 100644
--- a/Documentation/devicetree/bindings/crypto/amd-ccp.txt
+++ b/Documentation/devicetree/bindings/crypto/amd-ccp.txt
@@ -3,8 +3,6 @@
Required properties:
- compatible: Should be "amd,ccp-seattle-v1a"
- reg: Address and length of the register set for the device
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
- interrupts: Should contain the CCP interrupt
Optional properties:
diff --git a/Documentation/devicetree/bindings/crypto/arm-cryptocell.txt b/Documentation/devicetree/bindings/crypto/arm-cryptocell.txt
index c2598ab..999fb2a 100644
--- a/Documentation/devicetree/bindings/crypto/arm-cryptocell.txt
+++ b/Documentation/devicetree/bindings/crypto/arm-cryptocell.txt
@@ -7,8 +7,6 @@
- interrupts: Interrupt number for the device.
Optional properties:
-- interrupt-parent: The phandle for the interrupt controller that services
- interrupts for this device.
- clocks: Reference to the crypto engine clock.
- dma-coherent: Present if dma operations are coherent.
diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec2.txt b/Documentation/devicetree/bindings/crypto/fsl-sec2.txt
index f0d926b..125f155 100644
--- a/Documentation/devicetree/bindings/crypto/fsl-sec2.txt
+++ b/Documentation/devicetree/bindings/crypto/fsl-sec2.txt
@@ -50,11 +50,6 @@
..and so on and so forth.
-Optional properties:
-
-- interrupt-parent : the phandle for the interrupt controller that
- services interrupts for this device.
-
Example:
/* MPC8548E */
diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
index 3c1f3a2..2fe245c 100644
--- a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
+++ b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
@@ -99,13 +99,6 @@
of the specifier is defined by the binding document
describing the node's interrupt parent.
- - interrupt-parent
- Usage: (required if interrupt property is defined)
- Value type: <phandle>
- Definition: A single <phandle> value that points
- to the interrupt parent to which the child domain
- is being mapped.
-
- clocks
Usage: required if SEC 4.0 requires explicit enablement of clocks
Value type: <prop_encoded-array>
@@ -199,13 +192,6 @@
of the specifier is defined by the binding document
describing the node's interrupt parent.
- - interrupt-parent
- Usage: (required if interrupt property is defined)
- Value type: <phandle>
- Definition: A single <phandle> value that points
- to the interrupt parent to which the child domain
- is being mapped.
-
EXAMPLE
jr@1000 {
compatible = "fsl,sec-v4.0-job-ring";
@@ -370,13 +356,6 @@
of the specifier is defined by the binding document
describing the node's interrupt parent.
- - interrupt-parent
- Usage: (required if interrupt property is defined)
- Value type: <phandle>
- Definition: A single <phandle> value that points
- to the interrupt parent to which the child domain
- is being mapped.
-
EXAMPLE
sec_mon@314000 {
compatible = "fsl,sec-v4.0-mon", "syscon";
diff --git a/Documentation/devicetree/bindings/crypto/picochip-spacc.txt b/Documentation/devicetree/bindings/crypto/picochip-spacc.txt
index d8609ec..df1151f 100644
--- a/Documentation/devicetree/bindings/crypto/picochip-spacc.txt
+++ b/Documentation/devicetree/bindings/crypto/picochip-spacc.txt
@@ -7,8 +7,6 @@
- compatible : "picochip,spacc-ipsec" for the IPSEC offload engine
"picochip,spacc-l2" for the femtocell layer 2 ciphering engine.
- reg : Offset and length of the register set for this device
- - interrupt-parent : The interrupt controller that controls the SPAcc
- interrupt.
- interrupts : The interrupt line from the SPAcc.
- ref-clock : The input clock that drives the SPAcc.
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
index 0c7473dd..027d76c 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
+++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
@@ -15,8 +15,6 @@
from common clock binding: handle to dp clock.
-clock-names:
from common clock binding: Shall be "dp".
- -interrupt-parent:
- phandle to Interrupt combiner node.
-phys:
from general PHY binding: the phandle for the PHY device.
-phy-names:
diff --git a/Documentation/devicetree/bindings/display/bridge/anx7814.txt b/Documentation/devicetree/bindings/display/bridge/anx7814.txt
index b2a22c2..dbd7c84 100644
--- a/Documentation/devicetree/bindings/display/bridge/anx7814.txt
+++ b/Documentation/devicetree/bindings/display/bridge/anx7814.txt
@@ -8,8 +8,6 @@
- compatible : "analogix,anx7814"
- reg : I2C address of the device
- - interrupt-parent : Should be the phandle of the interrupt controller
- that services interrupts for this device
- interrupts : Should contain the INTP interrupt
- hpd-gpios : Which GPIO to use for hpd
- pd-gpios : Which GPIO to use for power down
diff --git a/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt b/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
index aacc8b9..09e0a21 100644
--- a/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
+++ b/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
@@ -19,8 +19,6 @@
stdp4028-ge-b850v3-fw required properties:
- compatible : "megachips,stdp4028-ge-b850v3-fw"
- reg : I2C bus address
- - interrupt-parent : phandle of the interrupt controller that services
- interrupts to the device
- interrupts : one interrupt should be described here, as in
<0 IRQ_TYPE_LEVEL_HIGH>
- ports : One input port(reg = <0>) and one output port(reg = <1>)
diff --git a/Documentation/devicetree/bindings/display/bridge/sii902x.txt b/Documentation/devicetree/bindings/display/bridge/sii902x.txt
index 56a3e68..72d2dc6 100644
--- a/Documentation/devicetree/bindings/display/bridge/sii902x.txt
+++ b/Documentation/devicetree/bindings/display/bridge/sii902x.txt
@@ -5,8 +5,8 @@
- reg: i2c address of the bridge
Optional properties:
- - interrupts-extended or interrupt-parent + interrupts: describe
- the interrupt line used to inform the host about hotplug events.
+ - interrupts: describe the interrupt line used to inform the host
+ about hotplug events.
- reset-gpios: OF device-tree gpio specification for RST_N pin.
Optional subnodes:
diff --git a/Documentation/devicetree/bindings/display/bridge/sii9234.txt b/Documentation/devicetree/bindings/display/bridge/sii9234.txt
index 88041ba..a55bf77 100644
--- a/Documentation/devicetree/bindings/display/bridge/sii9234.txt
+++ b/Documentation/devicetree/bindings/display/bridge/sii9234.txt
@@ -7,7 +7,7 @@
- iovcc18-supply : I/O Supply Voltage (1.8V)
- avcc12-supply : TMDS Analog Supply Voltage (1.2V)
- cvcc12-supply : Digital Core Supply Voltage (1.2V)
- - interrupts, interrupt-parent: interrupt specifier of INT pin
+ - interrupts: interrupt specifier of INT pin
- reset-gpios: gpio specifier of RESET pin (active low)
- video interfaces: Device node can contain two video interface port
nodes for HDMI encoder and connector according to [1].
diff --git a/Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt b/Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt
index 9409d9c..b05052f 100644
--- a/Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt
+++ b/Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt
@@ -5,7 +5,7 @@
- reg: i2c address of the bridge
- cvcc10-supply: Digital Core Supply Voltage (1.0V)
- iovcc18-supply: I/O Supply Voltage (1.8V)
- - interrupts, interrupt-parent: interrupt specifier of INT pin
+ - interrupts: interrupt specifier of INT pin
- reset-gpios: gpio specifier of RESET pin
- clocks, clock-names: specification and name of "xtal" clock
- video interfaces: Device node can contain video interface port
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt b/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt
index 9e2e7f6..53912c9 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt
@@ -9,9 +9,6 @@
- reg: physical base address and length of the DECON registers set.
-- interrupt-parent: should be the phandle of the decon controller's
- parent interrupt controller.
-
- interrupts: should contain a list of all DECON IP block interrupts in the
order: FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier
format depends on the interrupt controller used.
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
index ade5d8e..9b6cba3 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
@@ -25,8 +25,6 @@
from common clock binding: handle to dp clock.
-clock-names:
from common clock binding: Shall be "dp".
- -interrupt-parent:
- phandle to Interrupt combiner node.
-phys:
from general PHY binding: the phandle for the PHY device.
-phy-names:
diff --git a/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt b/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt
index 5837402c..b309642 100644
--- a/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt
+++ b/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt
@@ -16,9 +16,6 @@
- reg: physical base address and length of the FIMD registers set.
-- interrupt-parent: should be the phandle of the fimd controller's
- parent interrupt controller.
-
- interrupts: should contain a list of all FIMD IP block interrupts in the
order: FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier
format depends on the interrupt controller used.
diff --git a/Documentation/devicetree/bindings/display/ht16k33.txt b/Documentation/devicetree/bindings/display/ht16k33.txt
index 8e5b30b..d5a8b07 100644
--- a/Documentation/devicetree/bindings/display/ht16k33.txt
+++ b/Documentation/devicetree/bindings/display/ht16k33.txt
@@ -4,8 +4,6 @@
Required properties:
- compatible: "holtek,ht16k33"
- reg: I2C slave address of the chip.
-- interrupt-parent: A phandle pointing to the interrupt controller
- serving the interrupt for this chip.
- interrupts: Interrupt specification for the key pressed interrupt.
- refresh-rate-hz: Display update interval in HZ.
- debounce-delay-ms: Debouncing interval time in milliseconds.
diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
index 518e9cd..5eaffca 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi.txt
+++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
@@ -43,8 +43,6 @@
the master link of the 2-DSI panel.
- qcom,sync-dual-dsi: Boolean value indicating if the DSI controller is
driving a 2-DSI panel whose 2 links need receive command simultaneously.
-- interrupt-parent: phandle to the MDP block if the interrupt signal is routed
- through MDP block
- pinctrl-names: the pin control state names; should contain "default"
- pinctrl-0: the default pinctrl state (active)
- pinctrl-n: the "sleep" pinctrl state
diff --git a/Documentation/devicetree/bindings/display/msm/edp.txt b/Documentation/devicetree/bindings/display/msm/edp.txt
index 95ce19c..eff9daf 100644
--- a/Documentation/devicetree/bindings/display/msm/edp.txt
+++ b/Documentation/devicetree/bindings/display/msm/edp.txt
@@ -25,10 +25,6 @@
- panel-hpd-gpios: GPIO pin used for eDP hpd.
-Optional properties:
-- interrupt-parent: phandle to the MDP block if the interrupt signal is routed
- through MDP block
-
Example:
mdss_edp: qcom,mdss_edp@fd923400 {
compatible = "qcom,mdss-edp";
diff --git a/Documentation/devicetree/bindings/display/msm/mdp5.txt b/Documentation/devicetree/bindings/display/msm/mdp5.txt
index 1b31977..4e11338 100644
--- a/Documentation/devicetree/bindings/display/msm/mdp5.txt
+++ b/Documentation/devicetree/bindings/display/msm/mdp5.txt
@@ -41,8 +41,6 @@
- reg-names: The names of register regions. The following regions are required:
* "mdp_phys"
- interrupts: Interrupt line from MDP5 to MDSS interrupt controller.
-- interrupt-parent: phandle to the MDSS block
- through MDP block
- clocks: device clocks. See ../clocks/clock-bindings.txt for details.
- clock-names: the following clocks are required.
- * "bus"
diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt b/Documentation/devicetree/bindings/display/renesas,du.txt
index 7c6854b..ec9d34be 100644
--- a/Documentation/devicetree/bindings/display/renesas,du.txt
+++ b/Documentation/devicetree/bindings/display/renesas,du.txt
@@ -19,7 +19,6 @@
- reg: the memory-mapped I/O registers base address and length
- - interrupt-parent: phandle of the parent interrupt controller.
- interrupts: Interrupt specifiers for the DU interrupts.
- clocks: A list of phandles + clock-specifier pairs, one for each entry in
diff --git a/Documentation/devicetree/bindings/display/sm501fb.txt b/Documentation/devicetree/bindings/display/sm501fb.txt
index 9d9f009..1c79c26 100644
--- a/Documentation/devicetree/bindings/display/sm501fb.txt
+++ b/Documentation/devicetree/bindings/display/sm501fb.txt
@@ -9,8 +9,6 @@
- First entry: System Configuration register
- Second entry: IO space (Display Controller register)
- interrupts : SMI interrupt to the cpu should be described here.
-- interrupt-parent : the phandle for the interrupt controller that
- services interrupts for this device.
Optional properties:
- mode : select a video mode:
diff --git a/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt b/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt
index 3055d5c..7bf1bb4 100644
--- a/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt
+++ b/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt
@@ -8,8 +8,6 @@
- reg: base address and size of the LCDC device
Recommended properties:
- - interrupt-parent: the phandle for the interrupt controller that
- services interrupts for this device.
- ti,hwmods: Name of the hwmod associated to the LCDC
Optional properties:
diff --git a/Documentation/devicetree/bindings/dma/jz4780-dma.txt b/Documentation/devicetree/bindings/dma/jz4780-dma.txt
index f25feee..03e9cf7 100644
--- a/Documentation/devicetree/bindings/dma/jz4780-dma.txt
+++ b/Documentation/devicetree/bindings/dma/jz4780-dma.txt
@@ -5,7 +5,6 @@
- compatible: Should be "ingenic,jz4780-dma"
- reg: Should contain the DMA controller registers location and length.
- interrupts: Should contain the interrupt specifier of the DMA controller.
-- interrupt-parent: Should be the phandle of the interrupt controller that
- clocks: Should contain a clock specifier for the JZ4780 PDMA clock.
- #dma-cells: Must be <2>. Number of integer cells in the dmas property of
DMA clients (see below).
diff --git a/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.txt b/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.txt
index 1e1dc8f9..2f35b04 100644
--- a/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.txt
+++ b/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.txt
@@ -8,7 +8,6 @@
- reg: Should contain DMA registers location and length. This should be
a single entry that includes all of the per-channel registers in one
contiguous bank.
-- interrupt-parent: Phandle to the interrupt parent controller.
- interrupts: Should contain all of the per-channel DMA interrupts in
ascending order with respect to the DMA channel index.
- clocks: Must contain one entry for the ADMA module clock
diff --git a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt
index f237b79..dbe1604 100644
--- a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt
+++ b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt
@@ -5,8 +5,6 @@
- reg: Address range of the DMAC registers. This should include
all of the per-channel registers.
- interrupt: Should contain the DMAC interrupt number.
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device.
- dma-channels: Number of channels supported by hardware.
- snps,dma-masters: Number of AXI masters supported by the hardware.
- snps,data-width: Maximum AXI data width supported by hardware.
diff --git a/Documentation/devicetree/bindings/dma/snps-dma.txt b/Documentation/devicetree/bindings/dma/snps-dma.txt
index 99acc71..39e2b26 100644
--- a/Documentation/devicetree/bindings/dma/snps-dma.txt
+++ b/Documentation/devicetree/bindings/dma/snps-dma.txt
@@ -23,8 +23,6 @@
Optional properties:
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
- is_private: The device channels should be marked as private and not for by the
general purpose DMA channel allocator. False if not passed.
- multi-block: Multi block transfers supported by hardware. Array property with
diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt
index 3f15f66..4bbc94d 100644
--- a/Documentation/devicetree/bindings/dma/ti-edma.txt
+++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
@@ -201,7 +201,6 @@
- #dma-cells: Should be set to <1>
Clients should use a single channel number per DMA request.
- reg: Memory map for accessing module
-- interrupt-parent: Interrupt controller the interrupt is routed through
- interrupts: Exactly 3 interrupts need to be specified in the order:
1. Transfer completion interrupt.
2. Memory protection interrupt.
diff --git a/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt
index a784cdd..07a5a7a 100644
--- a/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt
+++ b/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt
@@ -5,7 +5,6 @@
Required properties:
- compatible : Should be "xlnx,zynqmp-dma-1.0"
- reg : Memory map for gdma/adma module access.
-- interrupt-parent : Interrupt controller the interrupt is routed through
- interrupts : Should contain DMA channel interrupt.
- xlnx,bus-width : Axi buswidth in bits. Should contain 128 or 64
- clock-names : List of input clocks "clk_main", "clk_apb"
diff --git a/Documentation/devicetree/bindings/extcon/extcon-rt8973a.txt b/Documentation/devicetree/bindings/extcon/extcon-rt8973a.txt
index 6dede7d..cfcf455 100644
--- a/Documentation/devicetree/bindings/extcon/extcon-rt8973a.txt
+++ b/Documentation/devicetree/bindings/extcon/extcon-rt8973a.txt
@@ -11,8 +11,6 @@
Required properties:
- compatible: Should be "richtek,rt8973a-muic"
- reg: Specifies the I2C slave address of the MUIC block. It should be 0x14
-- interrupt-parent: Specifies the phandle of the interrupt controller to which
- the interrupts from rt8973a are delivered to.
- interrupts: Interrupt specifiers for detection interrupt sources.
Example:
diff --git a/Documentation/devicetree/bindings/extcon/extcon-sm5502.txt b/Documentation/devicetree/bindings/extcon/extcon-sm5502.txt
index 4ecda22..fc3888e 100644
--- a/Documentation/devicetree/bindings/extcon/extcon-sm5502.txt
+++ b/Documentation/devicetree/bindings/extcon/extcon-sm5502.txt
@@ -9,8 +9,6 @@
Required properties:
- compatible: Should be "siliconmitus,sm5502-muic"
- reg: Specifies the I2C slave address of the MUIC block. It should be 0x25
-- interrupt-parent: Specifies the phandle of the interrupt controller to which
- the interrupts from sm5502 are delivered to.
- interrupts: Interrupt specifiers for detection interrupt sources.
Example:
diff --git a/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt b/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt
index 798cfc9..973362e 100644
--- a/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt
@@ -25,8 +25,6 @@
- #gpio-cells: Should be two. The first cell is the pin number
and the second cell is used to specify optional
parameters (currently unused).
-- interrupt-parent: Phandle for the interrupt controller that
- services interrupts for this device.
- interrupts: Interrupt mapping for GPIO IRQ.
- gpio-controller: Marks the port as GPIO controller.
diff --git a/Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.txt b/Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.txt
index a25c87b..ce19c56 100644
--- a/Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.txt
@@ -14,7 +14,6 @@
- #interrupt-cells: Should be <1>. Interrupts are triggered on both edges.
- interrupts: Defines the interrupt line connecting this GPIO controller to
its parent interrupt controller.
-- interrupt-parent: Defines the parent interrupt controller.
GPIO ranges are specified as described in
Documentation/devicetree/bindings/gpio/gpio.txt
diff --git a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt
index b405b44..5d468ec 100644
--- a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt
@@ -30,9 +30,6 @@
- interrupts:
The interrupt shared by all GPIO lines for this controller.
-- interrupt-parent:
- phandle of the parent interrupt controller
-
- interrupts-extended:
Alternate form of specifying interrupts and parents that allows for
multiple parents. This takes precedence over 'interrupts' and
diff --git a/Documentation/devicetree/bindings/gpio/gpio-adnp.txt b/Documentation/devicetree/bindings/gpio/gpio-adnp.txt
index af66b27..a28902a 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-adnp.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-adnp.txt
@@ -3,7 +3,6 @@
Required properties:
- compatible: should be "ad,gpio-adnp"
- reg: The I2C slave address for this device.
-- interrupt-parent: phandle of the parent interrupt controller.
- interrupts: Interrupt specifier for the controllers interrupt.
- #gpio-cells: Should be 2. The first cell is the GPIO number and the
second cell is used to specify optional parameters:
diff --git a/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt b/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt
index fc6378c..7e9b586 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt
@@ -17,7 +17,6 @@
Optional properties:
-- interrupt-parent : The parent interrupt controller, optional if inherited
- clocks : A phandle to the clock to use for debounce timings
The gpio and interrupt properties are further described in their respective
diff --git a/Documentation/devicetree/bindings/gpio/gpio-ath79.txt b/Documentation/devicetree/bindings/gpio/gpio-ath79.txt
index c522851..cf71f3e 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-ath79.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-ath79.txt
@@ -12,7 +12,6 @@
- ngpios: Should be set to the number of GPIOs available on the SoC.
Optional properties:
-- interrupt-parent: phandle of the parent interrupt controller.
- interrupts: Interrupt specifier for the controllers interrupt.
- interrupt-controller : Identifies the node as an interrupt controller
- #interrupt-cells : Specifies the number of cells needed to encode interrupt
diff --git a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
index 8beb053..553b92a 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
@@ -15,8 +15,6 @@
- first cell is the pin number
- second cell is used to specify optional parameters (unused)
-- interrupt-parent: phandle of the parent interrupt controller.
-
- interrupts: Array of GPIO interrupt number. Only banked or unbanked IRQs are
supported at a time.
diff --git a/Documentation/devicetree/bindings/gpio/gpio-max732x.txt b/Documentation/devicetree/bindings/gpio/gpio-max732x.txt
index 5fdc843..b3a9c0c 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-max732x.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-max732x.txt
@@ -30,7 +30,6 @@
- #interrupt-cells: Number of cells to encode an interrupt source, shall be 2.
- first cell is the pin number
- second cell is used to specify flags
- - interrupt-parent: phandle of the parent interrupt controller.
- interrupts: Interrupt specifier for the controllers interrupt.
Please refer to gpio.txt in this directory for details of the common GPIO
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt b/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt
index 88f2286..4e3c550 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt
@@ -37,6 +37,7 @@
- #interrupt-cells: if to be used as interrupt expander.
Optional properties:
+ - interrupts: interrupt specifier for the device's interrupt output.
- reset-gpios: GPIO specification for the RESET input. This is an
active low signal to the PCA953x.
- vcc-supply: power supply regulator.
@@ -49,6 +50,8 @@
reg = <0x20>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pca9505>;
+ gpio-controller;
+ #gpio-cells = <2>;
interrupt-parent = <&gpio3>;
interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt b/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
index 7d3bd63..a482455 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
@@ -49,7 +49,6 @@
- interrupt-controller: Identifies the node as an interrupt controller.
- #interrupt-cells: Number of cells to encode an interrupt source, shall be 2.
- - interrupt-parent: phandle of the parent interrupt controller.
- interrupts: Interrupt specifier for the controllers interrupt.
diff --git a/Documentation/devicetree/bindings/gpio/gpio-uniphier.txt b/Documentation/devicetree/bindings/gpio/gpio-uniphier.txt
index fed9158..f281f12 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-uniphier.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-uniphier.txt
@@ -6,7 +6,6 @@
- gpio-controller: Marks the device node as a GPIO controller.
- #gpio-cells: Should be 2. The first cell is the pin number and the second
cell is used to specify optional parameters.
-- interrupt-parent: Specifies the parent interrupt controller.
- interrupt-controller: Marks the device node as an interrupt controller.
- #interrupt-cells: Should be 2. The first cell defines the interrupt number.
The second cell bits[3:0] is used to specify trigger type as follows:
diff --git a/Documentation/devicetree/bindings/gpio/gpio-xgene-sb.txt b/Documentation/devicetree/bindings/gpio/gpio-xgene-sb.txt
index 5490c1d..e90fb98 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-xgene-sb.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-xgene-sb.txt
@@ -26,7 +26,6 @@
1 = active low
- gpio-controller: Marks the device node as a GPIO controller.
- interrupts: The EXT_INT_0 parent interrupt resource must be listed first.
-- interrupt-parent: Phandle of the parent interrupt controller.
- interrupt-cells: Should be two.
- first cell is 0-N coresponding for EXT_INT_0 to EXT_INT_N.
- second cell is used to specify flags.
diff --git a/Documentation/devicetree/bindings/gpio/gpio-xilinx.txt b/Documentation/devicetree/bindings/gpio/gpio-xilinx.txt
index 63bf4be..08eed23 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-xilinx.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-xilinx.txt
@@ -14,8 +14,6 @@
Optional properties:
- interrupts : Interrupt mapping for GPIO IRQ.
-- interrupt-parent : Phandle for the interrupt controller that
- services interrupts for this device.
- xlnx,all-inputs : if n-th bit is setup, GPIO-n is input
- xlnx,dout-default : if n-th bit is 1, GPIO-n default value is 1
- xlnx,gpio-width : gpio width
diff --git a/Documentation/devicetree/bindings/gpio/gpio-xlp.txt b/Documentation/devicetree/bindings/gpio/gpio-xlp.txt
index 28662d8..47fc649 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-xlp.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-xlp.txt
@@ -30,7 +30,6 @@
4 = active high level-sensitive.
8 = active low level-sensitive.
- interrupts: Interrupt number for this device.
-- interrupt-parent: phandle of the parent interrupt controller.
- interrupt-controller: Identifies the node as an interrupt controller.
Example:
diff --git a/Documentation/devicetree/bindings/gpio/gpio-zynq.txt b/Documentation/devicetree/bindings/gpio/gpio-zynq.txt
index 7b54265..4fa4eb5 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-zynq.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-zynq.txt
@@ -11,7 +11,6 @@
- gpio-controller : Marks the device node as a GPIO controller.
- interrupts : Interrupt specifier (see interrupt bindings for
details)
-- interrupt-parent : Must be core interrupt controller
- interrupt-controller : Marks the device node as an interrupt controller.
- #interrupt-cells : Should be 2. The first cell is the GPIO number.
The second cell bits[3:0] is used to specify trigger type and level flags:
diff --git a/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt b/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt
index 45a61b4..df63da4 100644
--- a/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt
@@ -14,7 +14,6 @@
- #interrupt-cells: Should be two.
- interrupts: Interrupt specifier for the controller's Broadway (PowerPC)
interrupt.
-- interrupt-parent: phandle of the parent interrupt controller.
Example:
diff --git a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt
index 378f132..fe1bf24 100644
--- a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt
+++ b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt
@@ -31,7 +31,6 @@
- reg: Base address and length of each memory resource used by the GPIO
controller hardware module.
- - interrupt-parent: phandle of the parent interrupt controller.
- interrupts: Interrupt specifier for the controllers interrupt.
- gpio-controller: Marks the device node as a gpio controller.
diff --git a/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt b/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt
index 3c1118b..7276b50 100644
--- a/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt
@@ -25,7 +25,6 @@
interrupt. Shall be set to 2. The first cell defines the interrupt number,
the second encodes the triger flags encoded as described in
Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-- interrupt-parent : The parent interrupt controller.
- interrupts : The interrupts to the parent controller raised when GPIOs
generate the interrupts. If the controller provides one combined interrupt
for all GPIOs, specify a single interrupt. If the controller provides one
diff --git a/Documentation/devicetree/bindings/hsi/omap-ssi.txt b/Documentation/devicetree/bindings/hsi/omap-ssi.txt
index 955e335..77a0c3c 100644
--- a/Documentation/devicetree/bindings/hsi/omap-ssi.txt
+++ b/Documentation/devicetree/bindings/hsi/omap-ssi.txt
@@ -33,7 +33,6 @@
- reg-names: Contains the values "tx" and "rx" (in this order).
- reg: Contains a matching register specifier for each entry
in reg-names.
-- interrupt-parent Should be a phandle for the interrupt controller
- interrupts: Should contain interrupt specifiers for mpu interrupts
0 and 1 (in this order).
- ti,ssi-cawake-gpio: Defines which GPIO pin is used to signify CAWAKE
diff --git a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
index e7106bf..8fbd863 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
@@ -11,9 +11,6 @@
- resets : phandle to reset controller with the reset number in
the second cell
- interrupts : interrupt number
-- interrupt-parent : interrupt controller for bus, should reference a
- aspeed,ast2400-i2c-ic or aspeed,ast2500-i2c-ic
- interrupt controller
Optional Properties:
- bus-frequency : frequency of the bus clock in Hz defaults to 100 kHz when not
diff --git a/Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt b/Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt
index aeceace..0380609 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt
@@ -10,8 +10,6 @@
Optional properties :
-- interrupt-parent: specifies the phandle to the parent interrupt controller
- this one is cascaded from
- interrupts: specifies the interrupt number, the irq line to be used
- interrupt-names: Interrupt name string
diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt
index 60fe90d..00e4365 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt
@@ -5,7 +5,6 @@
- "fsl,imx7ulp-lpi2c" for LPI2C compatible with the one integrated on i.MX7ULP soc
- "fsl,imx8dv-lpi2c" for LPI2C compatible with the one integrated on i.MX8DV soc
- reg : address and length of the lpi2c master registers
-- interrupt-parent : core interrupt controller
- interrupts : lpi2c interrupt
- clocks : lpi2c clock specifier
diff --git a/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt b/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt
index d4a082a..3738cfb 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt
@@ -11,10 +11,6 @@
- pinctrl-names: should be "default";
- pinctrl-0: phandle to pinctrl function
-Optional properties:
-- interrupt-parent: Should be the phandle of the interrupt controller that
- delivers interrupts to the I2C block.
-
Example
/ {
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mpc.txt b/Documentation/devicetree/bindings/i2c/i2c-mpc.txt
index 1eacd6b..42a3905 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mpc.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mpc.txt
@@ -15,8 +15,6 @@
information for the interrupt. This should be encoded based on
the information in section 2) depending on the type of interrupt
controller you have.
- - interrupt-parent : the phandle for the interrupt controller that
- services interrupts for this device.
- fsl,preserve-clocking : boolean; if defined, the clock settings
from the bootloader are preserved (not touched).
- clock-frequency : desired I2C bus clock frequency in Hz.
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
index 34d9150..ccf6c86 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
@@ -28,8 +28,6 @@
- i2c-mux-idle-disconnect: Boolean; if defined, forces mux to disconnect all
children in idle state. This is necessary for example, if there are several
multiplexers on the bus and the devices behind them use same I2C addresses.
- - interrupt-parent: Phandle for the interrupt controller that services
- interrupts for this device.
- interrupts: Interrupt mapping for IRQ.
- interrupt-controller: Marks the device node as an interrupt controller.
- #interrupt-cells : Should be two.
diff --git a/Documentation/devicetree/bindings/i2c/i2c-pca-platform.txt b/Documentation/devicetree/bindings/i2c/i2c-pca-platform.txt
index f1f3876..73a693d 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-pca-platform.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-pca-platform.txt
@@ -12,8 +12,6 @@
Optional properties
- interrupts : the interrupt number
- - interrupt-parent : the phandle for the interrupt controller.
- If an interrupt is not specified polling will be used.
- reset-gpios : gpio specifier for gpio connected to RESET_N pin. As the line
is active low, it should be marked GPIO_ACTIVE_LOW.
- clock-frequency : I2C bus frequency.
diff --git a/Documentation/devicetree/bindings/i2c/i2c-pnx.txt b/Documentation/devicetree/bindings/i2c/i2c-pnx.txt
index fe98ada..2a59006 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-pnx.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-pnx.txt
@@ -7,8 +7,6 @@
- interrupts: configure one interrupt line
- #address-cells: always 1 (for i2c addresses)
- #size-cells: always 0
- - interrupt-parent: the phandle for the interrupt controller that
- services interrupts for this device.
Optional properties:
diff --git a/Documentation/devicetree/bindings/i2c/i2c-pxa.txt b/Documentation/devicetree/bindings/i2c/i2c-pxa.txt
index d30f0b1..c30783c 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-pxa.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-pxa.txt
@@ -12,9 +12,6 @@
Recommended properties :
- interrupts : the interrupt number
- - interrupt-parent : the phandle for the interrupt controller that
- services interrupts for this device. If the parent is the default
- interrupt controller in device tree, it could be ignored.
- mrvl,i2c-polling : Disable interrupt of i2c controller. Polling
status register of i2c controller instead.
- mrvl,i2c-fast-mode : Enable fast mode of i2c controller.
diff --git a/Documentation/devicetree/bindings/iio/accel/adxl345.txt b/Documentation/devicetree/bindings/iio/accel/adxl345.txt
index e7111b0..ae09a04 100644
--- a/Documentation/devicetree/bindings/iio/accel/adxl345.txt
+++ b/Documentation/devicetree/bindings/iio/accel/adxl345.txt
@@ -11,8 +11,6 @@
- spi-cpol and spi-cpha : must be defined for adxl345 to enable SPI mode 3
Optional properties:
- - interrupt-parent : phandle to the parent interrupt controller as documented
- in Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
- interrupts: interrupt mapping for IRQ as documented in
Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
diff --git a/Documentation/devicetree/bindings/iio/accel/bma180.txt b/Documentation/devicetree/bindings/iio/accel/bma180.txt
index 4a3679d..3b25b4c 100644
--- a/Documentation/devicetree/bindings/iio/accel/bma180.txt
+++ b/Documentation/devicetree/bindings/iio/accel/bma180.txt
@@ -10,8 +10,6 @@
Optional properties:
- - interrupt-parent : should be the phandle for the interrupt controller
-
- interrupts : interrupt mapping for GPIO IRQ, it should by configured with
flags IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING
For the bma250 the first interrupt listed must be the one
diff --git a/Documentation/devicetree/bindings/iio/accel/mma8452.txt b/Documentation/devicetree/bindings/iio/accel/mma8452.txt
index 45f5c5c..2100e9a 100644
--- a/Documentation/devicetree/bindings/iio/accel/mma8452.txt
+++ b/Documentation/devicetree/bindings/iio/accel/mma8452.txt
@@ -15,8 +15,6 @@
Optional properties:
- - interrupt-parent: should be the phandle for the interrupt controller
-
- interrupts: interrupt mapping for GPIO IRQ
- interrupt-names: should contain "INT1" and/or "INT2", the accelerometer's
diff --git a/Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt b/Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt
index 487ea96..ec04008 100644
--- a/Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt
@@ -2,7 +2,6 @@
Required properties:
- compatible: Should be "motorola,cpcap-adc" or "motorola,mapphone-cpcap-adc"
-- interrupt-parent: The interrupt controller
- interrupts: The interrupt number for the ADC device
- interrupt-names: Should be "adcdone"
- #io-channel-cells: Number of cells in an IIO specifier
diff --git a/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt b/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt
index b0866d3..eebdcec 100644
--- a/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt
+++ b/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt
@@ -8,7 +8,6 @@
- reg: Should be the register range of the module.
- interrupts: Should be the interrupt number of the module.
Typically this is <1>.
- - interrupt-parent: phandle to the tsadc module of the i.MX25.
- #address-cells: Should be <1> (setting for the subnodes)
- #size-cells: Should be <0> (setting for the subnodes)
diff --git a/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt b/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt
index a8770cc..e680c61 100644
--- a/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt
@@ -3,8 +3,6 @@
Required properties:
- compatible: Should be "maxim,max1027" or "maxim,max1029" or "maxim,max1031"
- reg: SPI chip select number for the device
- - interrupt-parent: phandle to the parent interrupt controller
- see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
- interrupts: IRQ line for the ADC
see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
index f1ead43..8346bcb 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
@@ -60,7 +60,6 @@
- reg: Offset of ADC instance in ADC block (e.g. may be 0x0, 0x100, 0x200).
- clocks: Input clock private to this ADC instance. It's required only on
stm32f4, that has per instance clock input for registers access.
-- interrupt-parent: Phandle to the parent interrupt controller.
- interrupts: IRQ Line for the ADC (e.g. may be 0 for adc@0, 1 for adc@100 or
2 for adc@200).
- st,adc-channels: List of single-ended channels muxed for this ADC.
diff --git a/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
index d71258e..e0e0755 100644
--- a/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
@@ -22,7 +22,6 @@
clock to the AXI bus interface of the core.
Optional properties:
- - interrupt-parent: phandle to the parent interrupt controller
- xlnx,external-mux:
* "none": No external multiplexer is used, this is the default
if the property is omitted.
diff --git a/Documentation/devicetree/bindings/iio/chemical/atlas,ec-sm.txt b/Documentation/devicetree/bindings/iio/chemical/atlas,ec-sm.txt
index 2962bd9..f432059 100644
--- a/Documentation/devicetree/bindings/iio/chemical/atlas,ec-sm.txt
+++ b/Documentation/devicetree/bindings/iio/chemical/atlas,ec-sm.txt
@@ -6,7 +6,6 @@
- compatible: must be "atlas,ec-sm"
- reg: the I2C address of the sensor
- - interrupt-parent: should be the phandle for the interrupt controller
- interrupts: the sole interrupt generated by the device
Refer to interrupt-controller/interrupts.txt for generic interrupt client
diff --git a/Documentation/devicetree/bindings/iio/chemical/atlas,orp-sm.txt b/Documentation/devicetree/bindings/iio/chemical/atlas,orp-sm.txt
index 5d8b687..af1f5a9 100644
--- a/Documentation/devicetree/bindings/iio/chemical/atlas,orp-sm.txt
+++ b/Documentation/devicetree/bindings/iio/chemical/atlas,orp-sm.txt
@@ -6,7 +6,6 @@
- compatible: must be "atlas,orp-sm"
- reg: the I2C address of the sensor
- - interrupt-parent: should be the phandle for the interrupt controller
- interrupts: the sole interrupt generated by the device
Refer to interrupt-controller/interrupts.txt for generic interrupt client
diff --git a/Documentation/devicetree/bindings/iio/chemical/atlas,ph-sm.txt b/Documentation/devicetree/bindings/iio/chemical/atlas,ph-sm.txt
index cffa190..79d90f0 100644
--- a/Documentation/devicetree/bindings/iio/chemical/atlas,ph-sm.txt
+++ b/Documentation/devicetree/bindings/iio/chemical/atlas,ph-sm.txt
@@ -6,7 +6,6 @@
- compatible: must be "atlas,ph-sm"
- reg: the I2C address of the sensor
- - interrupt-parent: should be the phandle for the interrupt controller
- interrupts: the sole interrupt generated by the device
Refer to interrupt-controller/interrupts.txt for generic interrupt client
diff --git a/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt b/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt
index b0d3b59..233fe20 100644
--- a/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt
+++ b/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt
@@ -5,7 +5,6 @@
- reg : the I2C address of the sensor
Optional properties:
- - interrupt-parent : should be the phandle for the interrupt controller
- interrupts : interrupt mapping for the trigger interrupt from the
internal oscillator. The following IRQ modes are supported:
IRQ_TYPE_EDGE_RISING, IRQ_TYPE_EDGE_FALLING, IRQ_TYPE_LEVEL_HIGH and
diff --git a/Documentation/devicetree/bindings/iio/health/afe4403.txt b/Documentation/devicetree/bindings/iio/health/afe4403.txt
index 2fffd70..8e41205 100644
--- a/Documentation/devicetree/bindings/iio/health/afe4403.txt
+++ b/Documentation/devicetree/bindings/iio/health/afe4403.txt
@@ -4,7 +4,6 @@
- compatible : Should be "ti,afe4403".
- reg : SPI chip select address of device.
- tx-supply : Regulator supply to transmitting LEDs.
- - interrupt-parent : Phandle to he parent interrupt controller.
- interrupts : The interrupt line the device ADC_RDY pin is
connected to. For details refer to,
../../interrupt-controller/interrupts.txt.
diff --git a/Documentation/devicetree/bindings/iio/health/afe4404.txt b/Documentation/devicetree/bindings/iio/health/afe4404.txt
index de69f20..0b52830 100644
--- a/Documentation/devicetree/bindings/iio/health/afe4404.txt
+++ b/Documentation/devicetree/bindings/iio/health/afe4404.txt
@@ -4,7 +4,6 @@
- compatible : Should be "ti,afe4404".
- reg : I2C address of the device.
- tx-supply : Regulator supply to transmitting LEDs.
- - interrupt-parent : Phandle to he parent interrupt controller.
- interrupts : The interrupt line the device ADC_RDY pin is
connected to. For details refer to,
../interrupt-controller/interrupts.txt.
diff --git a/Documentation/devicetree/bindings/iio/health/max30100.txt b/Documentation/devicetree/bindings/iio/health/max30100.txt
index 8d81764..0054908 100644
--- a/Documentation/devicetree/bindings/iio/health/max30100.txt
+++ b/Documentation/devicetree/bindings/iio/health/max30100.txt
@@ -5,7 +5,6 @@
Required properties:
- compatible: must be "maxim,max30100"
- reg: the I2C address of the sensor
- - interrupt-parent: should be the phandle for the interrupt controller
- interrupts: the sole interrupt generated by the device
Refer to interrupt-controller/interrupts.txt for generic
diff --git a/Documentation/devicetree/bindings/iio/health/max30102.txt b/Documentation/devicetree/bindings/iio/health/max30102.txt
index ef2ca0a..7ef7ae4 100644
--- a/Documentation/devicetree/bindings/iio/health/max30102.txt
+++ b/Documentation/devicetree/bindings/iio/health/max30102.txt
@@ -7,7 +7,6 @@
Required properties:
- compatible: must be "maxim,max30102" or "maxim,max30105"
- reg: the I2C address of the sensor
- - interrupt-parent: should be the phandle for the interrupt controller
- interrupts: the sole interrupt generated by the device
Refer to interrupt-controller/interrupts.txt for generic
diff --git a/Documentation/devicetree/bindings/iio/humidity/hts221.txt b/Documentation/devicetree/bindings/iio/humidity/hts221.txt
index 10adeb0..84d0293 100644
--- a/Documentation/devicetree/bindings/iio/humidity/hts221.txt
+++ b/Documentation/devicetree/bindings/iio/humidity/hts221.txt
@@ -13,7 +13,6 @@
when it is not active, whereas a pull-up one is needed when interrupt
line is configured as IRQ_TYPE_LEVEL_LOW or IRQ_TYPE_EDGE_FALLING.
Refer to pinctrl/pinctrl-bindings.txt for the property description.
-- interrupt-parent: should be the phandle for the interrupt controller
- interrupts: interrupt mapping for IRQ. It should be configured with
flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or
IRQ_TYPE_EDGE_FALLING.
diff --git a/Documentation/devicetree/bindings/iio/imu/bmi160.txt b/Documentation/devicetree/bindings/iio/imu/bmi160.txt
index ae0112c..0c1c105 100644
--- a/Documentation/devicetree/bindings/iio/imu/bmi160.txt
+++ b/Documentation/devicetree/bindings/iio/imu/bmi160.txt
@@ -9,7 +9,6 @@
- spi-max-frequency : set maximum clock frequency (only for SPI)
Optional properties:
- - interrupt-parent : should be the phandle of the interrupt controller
- interrupts : interrupt mapping for IRQ, must be IRQ_TYPE_LEVEL_LOW
- interrupt-names : set to "INT1" if INT1 pin should be used as interrupt
input, set to "INT2" if INT2 pin should be used instead
diff --git a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
index 5f4777e..d33c19d 100644
--- a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
+++ b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
@@ -11,7 +11,6 @@
"invensense,mpu9255"
"invensense,icm20608"
- reg : the I2C address of the sensor
- - interrupt-parent : should be the phandle for the interrupt controller
- interrupts: interrupt mapping for IRQ. It should be configured with flags
IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or
IRQ_TYPE_EDGE_FALLING.
diff --git a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
index ef8a856..ea2d6e0 100644
--- a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
+++ b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
@@ -20,7 +20,6 @@
IRQ_TYPE_EDGE_RISING a pull-down resistor is needed to drive the line
when it is not active, whereas a pull-up one is needed when interrupt
line is configured as IRQ_TYPE_LEVEL_LOW or IRQ_TYPE_EDGE_FALLING.
-- interrupt-parent: should be the phandle for the interrupt controller
- interrupts: interrupt mapping for IRQ. It should be configured with
flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or
IRQ_TYPE_EDGE_FALLING.
diff --git a/Documentation/devicetree/bindings/iio/light/apds9300.txt b/Documentation/devicetree/bindings/iio/light/apds9300.txt
index d6f66c7..aa199e0 100644
--- a/Documentation/devicetree/bindings/iio/light/apds9300.txt
+++ b/Documentation/devicetree/bindings/iio/light/apds9300.txt
@@ -9,7 +9,6 @@
Optional properties:
- - interrupt-parent : should be the phandle for the interrupt controller
- interrupts : interrupt mapping for GPIO IRQ
Example:
diff --git a/Documentation/devicetree/bindings/iio/light/apds9960.txt b/Documentation/devicetree/bindings/iio/light/apds9960.txt
index 174b709..3af325a 100644
--- a/Documentation/devicetree/bindings/iio/light/apds9960.txt
+++ b/Documentation/devicetree/bindings/iio/light/apds9960.txt
@@ -6,7 +6,6 @@
- compatible: must be "avago,apds9960"
- reg: the I2c address of the sensor
- - interrupt-parent: should be the phandle for the interrupt controller
- interrupts : the sole interrupt generated by the device
Refer to interrupt-controller/interrupts.txt for generic interrupt client
diff --git a/Documentation/devicetree/bindings/iio/light/isl29018.txt b/Documentation/devicetree/bindings/iio/light/isl29018.txt
index 425ab45..b9bbde3 100644
--- a/Documentation/devicetree/bindings/iio/light/isl29018.txt
+++ b/Documentation/devicetree/bindings/iio/light/isl29018.txt
@@ -10,7 +10,6 @@
Optional properties:
- - interrupt-parent: should be the phandle for the interrupt controller
- interrupts: the sole interrupt generated by the device
Refer to interrupt-controller/interrupts.txt for generic interrupt client
diff --git a/Documentation/devicetree/bindings/iio/light/opt3001.txt b/Documentation/devicetree/bindings/iio/light/opt3001.txt
index eac30d5..47b13eb 100644
--- a/Documentation/devicetree/bindings/iio/light/opt3001.txt
+++ b/Documentation/devicetree/bindings/iio/light/opt3001.txt
@@ -13,7 +13,6 @@
- reg: the I2C address of the sensor
Optional properties:
- - interrupt-parent: should be the phandle for the interrupt controller
- interrupts: interrupt mapping for GPIO IRQ (configure for falling edge)
Example:
diff --git a/Documentation/devicetree/bindings/iio/light/tsl2583.txt b/Documentation/devicetree/bindings/iio/light/tsl2583.txt
index 8e2066c..059dffa 100644
--- a/Documentation/devicetree/bindings/iio/light/tsl2583.txt
+++ b/Documentation/devicetree/bindings/iio/light/tsl2583.txt
@@ -10,7 +10,6 @@
Optional properties:
- - interrupt-parent: should be the phandle for the interrupt controller
- interrupts: the sole interrupt generated by the device
Refer to interrupt-controller/interrupts.txt for generic interrupt client
diff --git a/Documentation/devicetree/bindings/iio/light/uvis25.txt b/Documentation/devicetree/bindings/iio/light/uvis25.txt
index 3041207..043c139 100644
--- a/Documentation/devicetree/bindings/iio/light/uvis25.txt
+++ b/Documentation/devicetree/bindings/iio/light/uvis25.txt
@@ -5,7 +5,6 @@
- reg: i2c address of the sensor / spi cs line
Optional properties:
-- interrupt-parent: should be the phandle for the interrupt controller
- interrupts: interrupt mapping for IRQ. It should be configured with
flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or
IRQ_TYPE_EDGE_FALLING.
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt b/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt
index 9f263b7..fd5fca9 100644
--- a/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt
+++ b/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt
@@ -9,7 +9,6 @@
Optional properties:
- - interrupt-parent : phandle to the parent interrupt controller
- interrupts : interrupt mapping for GPIO IRQ
Example:
diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.txt b/Documentation/devicetree/bindings/iio/pressure/bmp085.txt
index c7198a0..5498b068 100644
--- a/Documentation/devicetree/bindings/iio/pressure/bmp085.txt
+++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.txt
@@ -12,7 +12,6 @@
- temp-measurement-period: temperature measurement period (milliseconds)
- default-oversampling: default oversampling value to be used at startup,
value range is 0-3 with rising sensitivity.
-- interrupt-parent: should be the phandle for the interrupt controller
- interrupts: interrupt mapping for IRQ
- reset-gpios: a GPIO line handling reset of the sensor: as the line is
active low, it should be marked GPIO_ACTIVE_LOW (see gpio/gpio.txt)
diff --git a/Documentation/devicetree/bindings/iio/pressure/zpa2326.txt b/Documentation/devicetree/bindings/iio/pressure/zpa2326.txt
index fb85de6..a36ab3e 100644
--- a/Documentation/devicetree/bindings/iio/pressure/zpa2326.txt
+++ b/Documentation/devicetree/bindings/iio/pressure/zpa2326.txt
@@ -15,8 +15,6 @@
power to the sensor
- vdd-supply: an optional regulator that needs to be on to provide VDD
power to the sensor
-- interrupt-parent: phandle to the parent interrupt controller as documented in
- Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
- interrupts: interrupt mapping for IRQ as documented in
Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
diff --git a/Documentation/devicetree/bindings/iio/proximity/as3935.txt b/Documentation/devicetree/bindings/iio/proximity/as3935.txt
index b6c1afa..8491155 100644
--- a/Documentation/devicetree/bindings/iio/proximity/as3935.txt
+++ b/Documentation/devicetree/bindings/iio/proximity/as3935.txt
@@ -6,7 +6,6 @@
- spi-max-frequency: specifies maximum SPI clock frequency
- spi-cpha: SPI Mode 1. Refer to spi/spi-bus.txt for generic SPI
slave node bindings.
- - interrupt-parent : should be the phandle for the interrupt controller
- interrupts : the sole interrupt generated by the device
Refer to interrupt-controller/interrupts.txt for generic
diff --git a/Documentation/devicetree/bindings/iio/proximity/sx9500.txt b/Documentation/devicetree/bindings/iio/proximity/sx9500.txt
index b301dd2..c54455d 100644
--- a/Documentation/devicetree/bindings/iio/proximity/sx9500.txt
+++ b/Documentation/devicetree/bindings/iio/proximity/sx9500.txt
@@ -3,7 +3,6 @@
Required properties:
- compatible: must be "semtech,sx9500"
- reg: i2c address where to find the device
- - interrupt-parent : should be the phandle for the interrupt controller
- interrupts : the sole interrupt generated by the device
Refer to interrupt-controller/interrupts.txt for generic
diff --git a/Documentation/devicetree/bindings/iio/sensorhub.txt b/Documentation/devicetree/bindings/iio/sensorhub.txt
index 8d57571..b6ac045 100644
--- a/Documentation/devicetree/bindings/iio/sensorhub.txt
+++ b/Documentation/devicetree/bindings/iio/sensorhub.txt
@@ -6,7 +6,6 @@
Required properties:
- compatible: "samsung,sensorhub-rinato" or "samsung,sensorhub-thermostat"
- spi-max-frequency: max SPI clock frequency
-- interrupt-parent: interrupt parent
- interrupts: communication interrupt
- ap-mcu-gpios: [out] ap to sensorhub line - used during communication
- mcu-ap-gpios: [in] sensorhub to ap - used during communication
diff --git a/Documentation/devicetree/bindings/iio/temperature/tmp007.txt b/Documentation/devicetree/bindings/iio/temperature/tmp007.txt
index b63aba9..da0af23 100644
--- a/Documentation/devicetree/bindings/iio/temperature/tmp007.txt
+++ b/Documentation/devicetree/bindings/iio/temperature/tmp007.txt
@@ -20,8 +20,6 @@
Optional properties:
- - interrupt-parent: should be the phandle for the interrupt controller
-
- interrupts: interrupt mapping for GPIO IRQ (level active low)
Example:
diff --git a/Documentation/devicetree/bindings/infiniband/hisilicon-hns-roce.txt b/Documentation/devicetree/bindings/infiniband/hisilicon-hns-roce.txt
index d3b273e..84f1a1b 100644
--- a/Documentation/devicetree/bindings/infiniband/hisilicon-hns-roce.txt
+++ b/Documentation/devicetree/bindings/infiniband/hisilicon-hns-roce.txt
@@ -19,7 +19,6 @@
- #size-cells: must be 2
Optional properties:
- dma-coherent: Present if DMA operations are coherent.
-- interrupt-parent: the interrupt parent of this device.
- interrupts: should contain 32 completion event irq,1 async event irq
and 1 event overflow irq.
- interrupt-names:should be one of 34 irqs for roce device
diff --git a/Documentation/devicetree/bindings/input/cypress,cyapa.txt b/Documentation/devicetree/bindings/input/cypress,cyapa.txt
index 8d91ba9..d3db659 100644
--- a/Documentation/devicetree/bindings/input/cypress,cyapa.txt
+++ b/Documentation/devicetree/bindings/input/cypress,cyapa.txt
@@ -3,8 +3,6 @@
Required properties:
- compatible: must be "cypress,cyapa".
- reg: I2C address of the chip.
-- interrupt-parent: a phandle for the interrupt controller (see interrupt
- binding[0]).
- interrupts: interrupt to which the chip is connected (see interrupt
binding[0]).
diff --git a/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt b/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt
index 635f62c..0c252d9 100644
--- a/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt
+++ b/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt
@@ -3,8 +3,6 @@
Required properties:
- compatible: must be "cypress,tm2-touchkey"
- reg: I2C address of the chip.
-- interrupt-parent: a phandle for the interrupt controller (see interrupt
- binding[0]).
- interrupts: interrupt to which the chip is connected (see interrupt
binding[0]).
- vcc-supply : internal regulator output. 1.8V
diff --git a/Documentation/devicetree/bindings/input/e3x0-button.txt b/Documentation/devicetree/bindings/input/e3x0-button.txt
index 751665e..907b195 100644
--- a/Documentation/devicetree/bindings/input/e3x0-button.txt
+++ b/Documentation/devicetree/bindings/input/e3x0-button.txt
@@ -7,8 +7,6 @@
Required properties:
- compatible: should be one of the following
- "ettus,e3x0-button": For devices such as the NI Ettus Research USRP E3x0
-- interrupt-parent:
- - a phandle to the interrupt controller that it is attached to.
- interrupts: should be one of the following
- <0 30 1>, <0 31 1>: For devices such as the NI Ettus Research USRP E3x0
- interrupt-names: should be one of the following
diff --git a/Documentation/devicetree/bindings/input/elan_i2c.txt b/Documentation/devicetree/bindings/input/elan_i2c.txt
index d80a835..7976074 100644
--- a/Documentation/devicetree/bindings/input/elan_i2c.txt
+++ b/Documentation/devicetree/bindings/input/elan_i2c.txt
@@ -3,8 +3,6 @@
Required properties:
- compatible: must be "elan,ekth3000".
- reg: I2C address of the chip.
-- interrupt-parent: a phandle for the interrupt controller (see interrupt
- binding[0]).
- interrupts: interrupt to which the chip is connected (see interrupt
binding[0]).
diff --git a/Documentation/devicetree/bindings/input/elants_i2c.txt b/Documentation/devicetree/bindings/input/elants_i2c.txt
index 8a71038..5edac8b 100644
--- a/Documentation/devicetree/bindings/input/elants_i2c.txt
+++ b/Documentation/devicetree/bindings/input/elants_i2c.txt
@@ -3,8 +3,6 @@
Required properties:
- compatible: must be "elan,ekth3500".
- reg: I2C address of the chip.
-- interrupt-parent: a phandle for the interrupt controller (see interrupt
- binding[0]).
- interrupts: interrupt to which the chip is connected (see interrupt
binding[0]).
diff --git a/Documentation/devicetree/bindings/input/hid-over-i2c.txt b/Documentation/devicetree/bindings/input/hid-over-i2c.txt
index 4d3da9d..f1cb9f8 100644
--- a/Documentation/devicetree/bindings/input/hid-over-i2c.txt
+++ b/Documentation/devicetree/bindings/input/hid-over-i2c.txt
@@ -14,7 +14,6 @@
- compatible: must be "hid-over-i2c"
- reg: i2c slave address
- hid-descr-addr: HID descriptor address
-- interrupt-parent: the phandle for the interrupt controller
- interrupts: interrupt line
Additional optional properties:
diff --git a/Documentation/devicetree/bindings/input/raydium_i2c_ts.txt b/Documentation/devicetree/bindings/input/raydium_i2c_ts.txt
index 5b6232d..99a4f2a 100644
--- a/Documentation/devicetree/bindings/input/raydium_i2c_ts.txt
+++ b/Documentation/devicetree/bindings/input/raydium_i2c_ts.txt
@@ -3,7 +3,6 @@
Required properties:
- compatible: must be "raydium,rm32380"
- reg: The I2C address of the device
-- interrupt-parent: the phandle for the interrupt controller
- interrupts: interrupt to which the chip is connected
See ../interrupt-controller/interrupts.txt
Optional properties:
diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt
index ec908b9..dcb012f 100644
--- a/Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt
+++ b/Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt
@@ -16,7 +16,6 @@
Optional Properties:
- interrupts: interrupt which the rmi device is connected to.
-- interrupt-parent: The interrupt controller.
See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
- syna,reset-delay-ms: The number of milliseconds to wait after resetting the
diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_spi.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_spi.txt
index a4ca782..632f473 100644
--- a/Documentation/devicetree/bindings/input/rmi4/rmi_spi.txt
+++ b/Documentation/devicetree/bindings/input/rmi4/rmi_spi.txt
@@ -16,7 +16,6 @@
Optional Properties:
- interrupts: interrupt which the rmi device is connected to.
-- interrupt-parent: The interrupt controller.
See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
- spi-rx-delay-us: microsecond delay after a read transfer.
diff --git a/Documentation/devicetree/bindings/input/ti,palmas-pwrbutton.txt b/Documentation/devicetree/bindings/input/ti,palmas-pwrbutton.txt
index a3dde8c..c829e18 100644
--- a/Documentation/devicetree/bindings/input/ti,palmas-pwrbutton.txt
+++ b/Documentation/devicetree/bindings/input/ti,palmas-pwrbutton.txt
@@ -9,7 +9,6 @@
Required properties:
- compatible: should be one of the following
- "ti,palmas-pwrbutton": For Palmas compatible power on button
-- interrupt-parent: Parent interrupt device, must be handle of palmas node.
- interrupts: Interrupt number of power button submodule on device.
Optional Properties:
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ad7879.txt b/Documentation/devicetree/bindings/input/touchscreen/ad7879.txt
index 3c8614c..cdd743a 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/ad7879.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/ad7879.txt
@@ -5,7 +5,6 @@
for I2C slave, use "adi,ad7879-1"
- reg : SPI chipselect/I2C slave address
See spi-bus.txt for more SPI slave properties
-- interrupt-parent : the phandle for the interrupt controller
- interrupts : touch controller interrupt
- touchscreen-max-pressure : maximum reported pressure
- adi,resistance-plate-x : total resistance of X-plate (for pressure
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ads7846.txt b/Documentation/devicetree/bindings/input/touchscreen/ads7846.txt
index 9fc47b0..04413da 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/ads7846.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/ads7846.txt
@@ -18,7 +18,6 @@
"ti,ads7846"
"ti,ads7873"
- interrupt-parent
interrupts An interrupt node describing the IRQ line the chip's
!PENIRQ pin is connected to.
vcc-supply A regulator node for the supply voltage.
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ar1021.txt b/Documentation/devicetree/bindings/input/touchscreen/ar1021.txt
index e459e85..82019bd6 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/ar1021.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/ar1021.txt
@@ -3,7 +3,6 @@
Required properties:
- compatible : "microchip,ar1021-i2c"
- reg : I2C slave address
-- interrupt-parent : the phandle for the interrupt controller
- interrupts : touch controller interrupt
Example:
diff --git a/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt b/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt
index d11f8d6..38b0603 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt
@@ -3,8 +3,6 @@
Required properties:
- compatible : "chipone,icn8318"
- reg : I2C slave address of the chip (0x40)
- - interrupt-parent : a phandle pointing to the interrupt controller
- serving the interrupt for this chip
- interrupts : interrupt specification for the icn8318 interrupt
- wake-gpios : GPIO specification for the WAKE input
- touchscreen-size-x : horizontal resolution of touchscreen (in pixels)
diff --git a/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
index df531b5..2e1490a 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
@@ -7,7 +7,6 @@
- xm-gpios: FET gate driver for input of X-
- yp-gpios: FET gate driver for input of Y+
- ym-gpios: FET gate driver for input of Y-
-- interrupt-parent: phandle for the interrupt controller
- interrupts: pen irq interrupt for touch detection
- pinctrl-names: "idle", "default", "gpios"
- pinctrl-0: pinctrl node for pen/touch detection state pinmux
diff --git a/Documentation/devicetree/bindings/input/touchscreen/cyttsp.txt b/Documentation/devicetree/bindings/input/touchscreen/cyttsp.txt
index b75d4cf..6ee274a 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/cyttsp.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/cyttsp.txt
@@ -4,8 +4,6 @@
- compatible : must be "cypress,cyttsp-i2c" or "cypress,cyttsp-spi"
- reg : Device I2C address or SPI chip select number
- spi-max-frequency : Maximum SPI clocking speed of the device (for cyttsp-spi)
- - interrupt-parent : the phandle for the gpio controller
- (see interrupt binding[0]).
- interrupts : (gpio) interrupt to which the chip is connected
(see interrupt binding[0]).
- bootloader-key : the 8-byte bootloader key that is required to switch
diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
index 025cf8c..da2dc5d 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
@@ -22,8 +22,6 @@
or: "focaltech,ft6236"
- reg: I2C slave address of the chip (0x38)
- - interrupt-parent: a phandle pointing to the interrupt controller
- serving the interrupt for this chip
- interrupts: interrupt specification for the touchdetect
interrupt
diff --git a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
index 298e344..92fb262 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
@@ -3,7 +3,6 @@
Required properties:
- compatible: must be "eeti,egalax_ts"
- reg: i2c slave address
-- interrupt-parent: the phandle for the interrupt controller
- interrupts: touch controller interrupt
- wakeup-gpios: the gpio pin to be used for waking up the controller
and also used as irq pin
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt b/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt
index 5a19f4c..94c4fc6 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt
@@ -3,8 +3,6 @@
Required properties:
- compatible : "elan,ektf2127"
- reg : I2C slave address of the chip (0x40)
- - interrupt-parent : a phandle pointing to the interrupt controller
- serving the interrupt for this chip
- interrupts : interrupt specification for the ektf2127 interrupt
- power-gpios : GPIO specification for the pin connected to the
ektf2127's wake input. This needs to be driven high
diff --git a/Documentation/devicetree/bindings/input/touchscreen/exc3000.txt b/Documentation/devicetree/bindings/input/touchscreen/exc3000.txt
index 1dcff4a..68291b9 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/exc3000.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/exc3000.txt
@@ -3,7 +3,6 @@
Required properties:
- compatible: must be "eeti,exc3000"
- reg: i2c slave address
-- interrupt-parent: the phandle for the interrupt controller
- interrupts: touch controller interrupt
- touchscreen-size-x: See touchscreen.txt
- touchscreen-size-y: See touchscreen.txt
diff --git a/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt b/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt
index abfcab3..99d6f9d 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt
@@ -8,7 +8,6 @@
- reg: Memory range of the device.
- interrupts: Should be the interrupt number associated with this module within
the tscadc unit (<0>).
- - interrupt-parent: Should be a phandle to the tscadc unit.
- fsl,wires: Should be '<4>' or '<5>'
Optional properties:
diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
index 0c369d8..f7e95c5 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
@@ -11,7 +11,6 @@
or "goodix,gt928"
or "goodix,gt967"
- reg : I2C address of the chip. Should be 0x5d or 0x14
- - interrupt-parent : Interrupt controller to which the chip is connected
- interrupts : Interrupt to which the chip is connected
Optional properties:
diff --git a/Documentation/devicetree/bindings/input/touchscreen/hideep.txt b/Documentation/devicetree/bindings/input/touchscreen/hideep.txt
index 1063c30..a47c361 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/hideep.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/hideep.txt
@@ -3,7 +3,6 @@
Required properties:
- compatible : must be "hideep,hideep-ts"
- reg : I2C slave address, (e.g. 0x6C).
-- interrupt-parent : Interrupt controller to which the chip is connected.
- interrupts : Interrupt to which the chip is connected.
Optional properties:
diff --git a/Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt
index 40ac0fe..05e982c 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt
@@ -3,7 +3,6 @@
Required properties:
- compatible: must be "maxim,max11801"
- reg: i2c slave address
-- interrupt-parent: the phandle for the interrupt controller
- interrupts: touch controller interrupt
Example:
diff --git a/Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt b/Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt
index 7b8944c..b2ab549 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt
@@ -3,7 +3,6 @@
Required properties:
- compatible: must be "melfas,mip4_ts"
- reg: I2C slave address of the chip (0x48 or 0x34)
-- interrupt-parent: interrupt controller to which the chip is connected
- interrupts: interrupt to which the chip is connected
Optional properties:
diff --git a/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt b/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt
index d9b7c2f..6805d10 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt
@@ -3,8 +3,6 @@
Required properties:
- compatible : must be "samsung,s6sy761"
- reg : I2C slave address, (e.g. 0x48)
-- interrupt-parent : the phandle to the interrupt controller which provides
- the interrupt
- interrupts : interrupt specification
- avdd-supply : analogic power supply
- vdd-supply : power supply
diff --git a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt
index 84752de..d67e558 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt
@@ -8,8 +8,6 @@
"silead,gsl3675"
"silead,gsl3692"
- reg : I2C slave address of the chip (0x40)
-- interrupt-parent : a phandle pointing to the interrupt controller
- serving the interrupt for this chip
- interrupts : interrupt specification for the gsl1680 interrupt
- power-gpios : Specification for the pin connected to the gsl1680's
shutdown input. This needs to be driven high to take the
diff --git a/Documentation/devicetree/bindings/input/touchscreen/sis_i2c.txt b/Documentation/devicetree/bindings/input/touchscreen/sis_i2c.txt
index d87ad14..8f5322e 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/sis_i2c.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/sis_i2c.txt
@@ -3,8 +3,6 @@
Required properties:
- compatible: must be "sis,9200-ts"
- reg: i2c slave address
-- interrupt-parent: the phandle for the interrupt controller
- (see interrupt binding [0])
- interrupts: touch controller interrupt (see interrupt
binding [0])
diff --git a/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.txt b/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.txt
index 9683595..0a5d0cb 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.txt
@@ -10,8 +10,6 @@
Required properties:
- compatible : must be "st,stmfts"
- reg : I2C slave address, (e.g. 0x49)
-- interrupt-parent : the phandle to the interrupt controller which provides
- the interrupt
- interrupts : interrupt specification
- avdd-supply : analogic power supply
- vdd-supply : power supply
diff --git a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
index 5aaa6b3..4886c4a 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
@@ -3,7 +3,6 @@
Required properties:
- compatible: must be "semtech,sx8654"
- reg: i2c slave address
-- interrupt-parent: the phandle for the interrupt controller
- interrupts: touch controller interrupt
Example:
diff --git a/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt b/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt
index ec365e1..ed00f61 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt
@@ -9,8 +9,6 @@
- gpios: the interrupt gpio the chip is connected to (trough the penirq pin).
The penirq pin goes to low when the panel is touched.
(see GPIO binding[1] for more details).
-- interrupt-parent: the phandle for the gpio controller
- (see interrupt binding[0]).
- interrupts: (gpio) interrupt to which the chip is connected
(see interrupt binding[0]).
- ti,max-rt: maximum pressure.
diff --git a/Documentation/devicetree/bindings/input/touchscreen/zet6223.txt b/Documentation/devicetree/bindings/input/touchscreen/zet6223.txt
index fe6a1fe..27d55a5 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/zet6223.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/zet6223.txt
@@ -3,8 +3,6 @@
Required properties:
- compatible : "zeitec,zet6223"
- reg : I2C slave address of the chip (0x76)
-- interrupt-parent : a phandle pointing to the interrupt controller
- serving the interrupt for this chip
- interrupts : interrupt specification for the zet6223 interrupt
Optional properties:
diff --git a/Documentation/devicetree/bindings/interrupt-controller/abilis,tb10x-ictl.txt b/Documentation/devicetree/bindings/interrupt-controller/abilis,tb10x-ictl.txt
index 9d52d5a..5a4dd26 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/abilis,tb10x-ictl.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/abilis,tb10x-ictl.txt
@@ -13,7 +13,6 @@
- interrupt-congroller: Identifies the node as an interrupt controller.
- #interrupt cells: Specifies the number of cells used to encode an interrupt
source connected to this controller. The value shall be 2.
-- interrupt-parent: Specifies the parent interrupt controller.
- interrupts: Specifies the list of interrupt lines which are handled by
the interrupt controller in the parent controller's notation. Interrupts
are mapped one-to-one to parent interrupts.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/al,alpine-msix.txt b/Documentation/devicetree/bindings/interrupt-controller/al,alpine-msix.txt
index f6f1c14..5669764 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/al,alpine-msix.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/al,alpine-msix.txt
@@ -6,7 +6,6 @@
- compatible: should be "al,alpine-msix"
- reg: physical base address and size of the registers
-- interrupt-parent: specifies the parent interrupt controller.
- interrupt-controller: identifies the node as an interrupt controller
- msi-controller: identifies the node as an PCI Message Signaled Interrupt
controller
diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt
index 4903fb7..24beadf 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt
@@ -13,7 +13,6 @@
- #interrupt-cells : Specifies the number of cells needed to encode an
interrupt source. The value shall be 2. The first cell is the IRQ number, the
second cell the trigger type as defined in interrupt.txt in this directory.
-- interrupt-parent: Specifies the parent interrupt controller.
- interrupts: Specifies the interrupt line (NMI) which is handled by
the interrupt controller in the parent controller's notation. This value
shall be the NMI.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
index 89674ad..1502a51 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
@@ -15,9 +15,6 @@
"amlogic,meson-gxbb-gpio-intc" for GXBB SoCs (S905) or
"amlogic,meson-gxl-gpio-intc" for GXL SoCs (S905X, S912)
"amlogic,meson-axg-gpio-intc" for AXG SoCs (A113D, A113X)
-- interrupt-parent : a phandle to the GIC the interrupts are routed to.
- Usually this is provided at the root level of the device tree as it is
- common to most of the SoC.
- reg : Specifies base physical address and size of the registers.
- interrupt-controller : Identifies the node as an interrupt controller.
- #interrupt-cells : Specifies the number of cells needed to encode an
diff --git a/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt b/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt
index 0e9f09a..f4c5d34 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt
@@ -4,7 +4,6 @@
- compatible: Should be "atmel,<chip>-aic"
<chip> can be "at91rm9200", "sama5d2", "sama5d3" or "sama5d4"
- interrupt-controller: Identifies the node as an interrupt controller.
-- interrupt-parent: For single AIC system, it is an empty property.
- #interrupt-cells: The number of cells to define the interrupts. It should be 3.
The first cell is the IRQ number (aka "Peripheral IDentifier" on datasheet).
The second cell is used to specify flags:
@@ -27,7 +26,6 @@
aic: interrupt-controller@fffff000 {
compatible = "atmel,at91rm9200-aic";
interrupt-controller;
- interrupt-parent;
#interrupt-cells = <3>;
reg = <0xfffff000 0x200>;
};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
index 6428a6b..0f1af5a 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
@@ -26,8 +26,6 @@
are 0..7 for bank 0, and 0..31 for bank 1.
Additional required properties for brcm,bcm2836-armctrl-ic:
-- interrupt-parent : Specifies the parent interrupt controller when this
- controller is the second level.
- interrupts : Specifies the interrupt on the parent for this interrupt
controller to handle.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt
index 8f48aad..37aea40 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt
@@ -18,8 +18,6 @@
- interrupt-controller: identifies the node as an interrupt controller
- #interrupt-cells: specifies the number of cells needed to encode an interrupt
source, should be 1.
-- interrupt-parent: specifies the phandle to the parent interrupt controller
- this one is cascaded from
- interrupts: specifies the interrupt line in the interrupt-parent controller
node, valid values depend on the type of parent interrupt controller
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-l1-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-l1-intc.txt
index 4040905..2bc19b1 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-l1-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-l1-intc.txt
@@ -29,8 +29,6 @@
- interrupt-controller: identifies the node as an interrupt controller
- #interrupt-cells: specifies the number of cells needed to encode an interrupt
source, should be 1.
-- interrupt-parent: specifies the phandle to the parent interrupt controller(s)
- this one is cascaded from
- interrupts: specifies the interrupt line(s) in the interrupt-parent controller
node; valid values depend on the type of parent interrupt controller
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt
index cc217b2..2117d4a 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt
@@ -28,8 +28,6 @@
- interrupt-controller: identifies the node as an interrupt controller
- #interrupt-cells: specifies the number of cells needed to encode an interrupt
source, should be 1.
-- interrupt-parent: specifies the phandle to the parent interrupt controller(s)
- this one is cascaded from
- interrupts: specifies the interrupt line(s) in the interrupt-parent controller
node; valid values depend on the type of parent interrupt controller
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt
index 44a9bb1..addd86b 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt
@@ -56,8 +56,6 @@
- interrupt-controller: identifies the node as an interrupt controller
- #interrupt-cells: specifies the number of cells needed to encode an interrupt
source, should be 1.
-- interrupt-parent: specifies the phandle to the parent interrupt controller
- this one is cascaded from
- interrupts: specifies the interrupt line(s) in the interrupt-parent controller
node, valid values depend on the type of parent interrupt controller
- brcm,int-map-mask: 32-bits bit mask describing how many and which interrupts
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt
index 36df06c..d514ec0 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt
@@ -8,8 +8,6 @@
- interrupt-controller: identifies the node as an interrupt controller
- #interrupt-cells: specifies the number of cells needed to encode an
interrupt source. Should be 1.
-- interrupt-parent: specifies the phandle to the parent interrupt controller
- this controller is cacaded from
- interrupts: specifies the interrupt line in the interrupt-parent irq space
to be used for cascading
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt
index a4ff93d..454ce04 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt
@@ -13,9 +13,6 @@
- reg: physical base address of the controller and length of memory mapped.
- interrupts: an interrupt to the parent interrupt controller.
-Optional properties:
-- interrupt-parent: the phandle to the parent interrupt controller.
-
This interrupt controller hardware is a second level interrupt controller that
is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based
platforms. If interrupt-parent is not provided, the default parent interrupt
diff --git a/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt b/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt
index 3b2f4c4..a6813a0 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt
@@ -68,8 +68,6 @@
Devices connect to mbigen required properties:
----------------------------------------------------
--interrupt-parent: Specifies the mbigen device node which device connected.
-
-interrupts:Specifies the interrupt source.
For the specific information of each cell in this property,please refer to
the "interrupt-cells" description mentioned above.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.txt b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.txt
index f97fd8a..d4373d0 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.txt
@@ -12,7 +12,6 @@
- interrupt-controller : Identifies the node as an interrupt controller
- #interrupt-cells : Specifies the number of cells needed to encode an
interrupt source. The value shall be 1.
-- interrupt-parent : phandle of the CPU interrupt controller.
- interrupts : Specifies the CPU interrupt the controller is connected to.
Example:
diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt
index 3f6442c..930fb46 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt
@@ -26,8 +26,6 @@
See Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt
for details about the GIC Device Tree binding.
-- interrupt-parent : Reference to the parent interrupt controller.
-
Example:
odmi: odmi@300000 {
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,cirq.txt b/Documentation/devicetree/bindings/interrupt-controller/mediatek,cirq.txt
index a7efdbc..5865f4f 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/mediatek,cirq.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,cirq.txt
@@ -16,8 +16,6 @@
and "mediatek,cirq" as a fallback.
- interrupt-controller : Identifies the node as an interrupt controller.
- #interrupt-cells : Use the same format as specified by GIC in arm,gic.txt.
-- interrupt-parent: phandle of irq parent for cirq. The parent must
- use the same interrupt-cells format as GIC.
- reg: Physical base address of the cirq registers and length of memory
mapped region.
- mediatek,ext-irq-range: Identifies external irq number range in different
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
index 07bf0b9..6a32922 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
@@ -21,8 +21,6 @@
"mediatek,mt2701-sysirq", "mediatek,mt6577-sysirq": for MT2701
- interrupt-controller : Identifies the node as an interrupt controller
- #interrupt-cells : Use the same format as specified by GIC in arm,gic.txt.
-- interrupt-parent: phandle of irq parent for sysirq. The parent must
- use the same interrupt-cells format as GIC.
- reg: Physical base address of the intpol registers and length of memory
mapped region. Could be multiple bases here. Ex: mt6797 needs 2 reg, others
need 1.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.txt b/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.txt
index b47a8a0..f5baecc 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.txt
@@ -7,7 +7,6 @@
- interrupt-controller : Identifies the node as an interrupt controller
- #interrupt-cells : Specifies the number of cells needed to encode an
interrupt source. The value shall be 1.
-- interrupt-parent : phandle of the CPU interrupt controller.
- interrupts : Specifies the CPU interrupt the controller is connected to.
Example:
diff --git a/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt b/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt
index f246ccb..2ff3566 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt
@@ -19,8 +19,6 @@
- interrupt-controller : Identifies the node as an interrupt controller.
- #interrupt-cells : Specifies the number of cells needed to encode an
interrupt source. The value must be 3.
-- interrupt-parent : a phandle to the GIC these interrupts are routed
- to.
Notes:
diff --git a/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.txt b/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.txt
index 38211f3..0bfb3ba 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.txt
@@ -14,8 +14,6 @@
Reset value is IRQ_TYPE_LEVEL_LOW.
Optional properties:
-- interrupt-parent: empty for MIC interrupt controller, link to parent
- MIC interrupt controller for SIC1 and SIC2
- interrupts: empty for MIC interrupt controller, cascaded MIC
hardware interrupts for SIC1 and SIC2
diff --git a/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt
index 475ae9b..ad70006 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt
@@ -7,7 +7,6 @@
- compatible: has to be "qca,<soctype>-cpu-intc", "qca,ar7100-misc-intc" or
"qca,<soctype>-cpu-intc", "qca,ar7240-misc-intc"
- reg: Base address and size of the controllers memory area
-- interrupt-parent: phandle of the parent interrupt controller.
- interrupts: Interrupt specifier for the controllers interrupt.
- interrupt-controller : Identifies the node as an interrupt controller
- #interrupt-cells : Specifies the number of cells needed to encode interrupt
diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt
index 0b2c97d..8e0797c 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt
@@ -35,12 +35,6 @@
interrupt.
The second element is the trigger type.
-- interrupt-parent:
- Usage: required
- Value type: <phandle>
- Definition: Specifies the interrupt parent necessary for hierarchical
- domain to operate.
-
- interrupt-controller:
Usage: required
Value type: <bool>
diff --git a/Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.txt b/Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.txt
index 9e5f734..19af687 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.txt
@@ -32,8 +32,6 @@
- samsung,combiner-nr: The number of interrupt combiners supported. If this
property is not specified, the default number of combiners is assumed
to be 16.
-- interrupt-parent: pHandle of the parent interrupt controller, if not
- inherited from the parent node.
Example:
diff --git a/Documentation/devicetree/bindings/interrupt-controller/sigma,smp8642-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/sigma,smp8642-intc.txt
index 1f441fa..355c18a 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/sigma,smp8642-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/sigma,smp8642-intc.txt
@@ -4,7 +4,6 @@
- compatible: should be "sigma,smp8642-intc"
- reg: physical address of MMIO region
- ranges: address space mapping of child nodes
-- interrupt-parent: phandle of parent interrupt controller
- interrupt-controller: boolean
- #address-cells: should be <1>
- #size-cells: should be <1>
diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt
index 8b46a34..09fc02b 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt
@@ -7,7 +7,6 @@
- compatible: "snps,archs-idu-intc"
- interrupt-controller: This is an interrupt controller.
-- interrupt-parent: <reference to parent core intc>
- #interrupt-cells: Must be <1>.
Value of the cell specifies the "common" IRQ from peripheral to IDU. Number N
diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt b/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt
index 4929117..086ff08 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt
@@ -11,7 +11,6 @@
- interrupt-controller: identifies the node as an interrupt controller
- #interrupt-cells: number of cells to encode an interrupt-specifier, shall be 1
- interrupts: interrupt reference to primary interrupt controller
-- interrupt-parent: (optional) reference specific primary interrupt controller
The interrupt sources map to the corresponding bits in the interrupt
registers, i.e.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.txt b/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.txt
index 8b2faef..dac0846 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.txt
@@ -12,7 +12,6 @@
- interrupt-controller : Identifies the node as an interrupt controller.
- #interrupt-cells : Specifies the number of cells needed to encode an
interrupt source. The value must be 3.
-- interrupt-parent : phandle of the GIC these interrupts are routed to.
- socionext,spi-base : The SPI number of the first SPI of the 32 adjacent
ones the EXIU forwards its interrups to.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt b/Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt
index 2ab0ea3..a407c49 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt
@@ -31,10 +31,6 @@
parent) is equal to number of groups. The format of the interrupt
specifier depends in the interrupt parent controller.
- Optional properties:
- - interrupt-parent: pHandle of the parent interrupt controller, if not
- inherited from the parent node.
-
Example:
The following is an example from the SPEAr320 SoC dtsi file.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/technologic,ts4800.txt b/Documentation/devicetree/bindings/interrupt-controller/technologic,ts4800.txt
index 7f15f1b..341ae59 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/technologic,ts4800.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/technologic,ts4800.txt
@@ -11,6 +11,4 @@
region
- #interrupt-cells: specifies the number of cells needed to encode an interrupt
source, should be 1.
-- interrupt-parent: phandle to the parent interrupt controller this one is
- cascaded from
- interrupts: specifies the interrupt line in the interrupt-parent controller
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,c64x+megamod-pic.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,c64x+megamod-pic.txt
index 42bb796..ee3f9c35 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/ti,c64x+megamod-pic.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,c64x+megamod-pic.txt
@@ -46,7 +46,6 @@
- interrupt-controller
- #interrupt-cells: <1>
- reg: base address and size of register area
- - interrupt-parent: must be core interrupt controller
- interrupts: This should have four cells; one for each interrupt combiner.
The cells contain the core priority interrupt to which the
corresponding combiner output is wired.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu b/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
index 18d4f40..422d690 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
@@ -12,8 +12,6 @@
- interrupt-controller : Identifies the node as an interrupt controller.
- #interrupt-cells : Specifies the number of cells needed to encode an
interrupt source. The value must be 3.
-- interrupt-parent : a phandle to the GIC these interrupts are routed
- to.
Notes:
diff --git a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt
index b1682c8..525ec82 100644
--- a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt
+++ b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt
@@ -31,7 +31,6 @@
- compatible: Should be "samsung,exynos-sysmmu"
- reg: A tuple of base address and size of System MMU registers.
- #iommu-cells: Should be <0>.
-- interrupt-parent: The phandle of the interrupt controller of System MMU
- interrupts: An interrupt specifier for interrupt signal of System MMU,
according to the format defined by a particular interrupt
controller.
diff --git a/Documentation/devicetree/bindings/mailbox/altera-mailbox.txt b/Documentation/devicetree/bindings/mailbox/altera-mailbox.txt
index 49cfc8c..c4dd93f 100644
--- a/Documentation/devicetree/bindings/mailbox/altera-mailbox.txt
+++ b/Documentation/devicetree/bindings/mailbox/altera-mailbox.txt
@@ -9,7 +9,6 @@
of cells required for the mailbox specifier. Should be 1.
Optional properties:
-- interrupt-parent : interrupt source phandle.
- interrupts : interrupt number. The interrupt specifier format
depends on the interrupt controller parent.
diff --git a/Documentation/devicetree/bindings/media/i2c/tc358743.txt b/Documentation/devicetree/bindings/media/i2c/tc358743.txt
index 49f8bcc..59102ed 100644
--- a/Documentation/devicetree/bindings/media/i2c/tc358743.txt
+++ b/Documentation/devicetree/bindings/media/i2c/tc358743.txt
@@ -12,7 +12,7 @@
Optional Properties:
- reset-gpios: gpio phandle GPIO connected to the reset pin
-- interrupts, interrupt-parent: GPIO connected to the interrupt pin
+- interrupts: GPIO connected to the interrupt pin
- data-lanes: should be <1 2 3 4> for four-lane operation,
or <1 2> for two-lane operation
- clock-lanes: should be <0>
diff --git a/Documentation/devicetree/bindings/media/sh_mobile_ceu.txt b/Documentation/devicetree/bindings/media/sh_mobile_ceu.txt
index 17a8e81..cfa4ffa 100644
--- a/Documentation/devicetree/bindings/media/sh_mobile_ceu.txt
+++ b/Documentation/devicetree/bindings/media/sh_mobile_ceu.txt
@@ -2,7 +2,6 @@
- compatible: Should be "renesas,sh-mobile-ceu"
- reg: register base and size
- interrupts: the interrupt number
- - interrupt-parent: the interrupt controller
- renesas,max-width: maximum image width, supported on this SoC
- renesas,max-height: maximum image height, supported on this SoC
diff --git a/Documentation/devicetree/bindings/mfd/ac100.txt b/Documentation/devicetree/bindings/mfd/ac100.txt
index b8ef006..dff219f 100644
--- a/Documentation/devicetree/bindings/mfd/ac100.txt
+++ b/Documentation/devicetree/bindings/mfd/ac100.txt
@@ -10,7 +10,6 @@
- sub-nodes:
- codec
- compatible: "x-powers,ac100-codec"
- - interrupt-parent: The parent interrupt controller
- interrupts: SoC NMI / GPIO interrupt connected to the
IRQ_AUDIO pin
- #clock-cells: Shall be 0
@@ -20,9 +19,6 @@
- rtc
- compatible: "x-powers,ac100-rtc"
- - interrupt-parent: The parent interrupt controller
- - interrupts: SoC NMI / GPIO interrupt connected to the
- IRQ_RTC pin
- clocks: A phandle to the codec's "4M_adda" clock
- #clock-cells: Shall be 1
- clock-output-names: "cko1_rtc", "cko2_rtc", "cko3_rtc"
diff --git a/Documentation/devicetree/bindings/mfd/altera-a10sr.txt b/Documentation/devicetree/bindings/mfd/altera-a10sr.txt
index c8a7365..a688520 100644
--- a/Documentation/devicetree/bindings/mfd/altera-a10sr.txt
+++ b/Documentation/devicetree/bindings/mfd/altera-a10sr.txt
@@ -5,7 +5,6 @@
- spi-max-frequency : Maximum SPI frequency.
- reg : The SPI Chip Select address for the Arria10
System Resource chip
-- interrupt-parent : The parent interrupt controller.
- interrupts : The interrupt line the device is connected to.
- interrupt-controller : Marks the device node as an interrupt controller.
- #interrupt-cells : The number of cells to describe an IRQ, should be 2.
diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt
index a014afb..9b62831 100644
--- a/Documentation/devicetree/bindings/mfd/arizona.txt
+++ b/Documentation/devicetree/bindings/mfd/arizona.txt
@@ -22,7 +22,6 @@
connected to.
- interrupt-controller : Arizona class devices contain interrupt controllers
and may provide interrupt services to other devices.
- - interrupt-parent : The parent interrupt controller.
- #interrupt-cells: the number of cells to describe an IRQ, this should be 2.
The first cell is the IRQ number.
The second cell is the flags, encoded as the trigger masks from
diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt
index d1762f3..62091f6 100644
--- a/Documentation/devicetree/bindings/mfd/axp20x.txt
+++ b/Documentation/devicetree/bindings/mfd/axp20x.txt
@@ -28,7 +28,6 @@
* "x-powers,axp809"
* "x-powers,axp813"
- reg: The I2C slave address or RSB hardware address for the AXP chip
-- interrupt-parent: The parent interrupt controller
- interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin
- interrupt-controller: The PMIC has its own internal IRQs
- #interrupt-cells: Should be set to 1
diff --git a/Documentation/devicetree/bindings/mfd/bd9571mwv.txt b/Documentation/devicetree/bindings/mfd/bd9571mwv.txt
index 25d1f69..8c46786 100644
--- a/Documentation/devicetree/bindings/mfd/bd9571mwv.txt
+++ b/Documentation/devicetree/bindings/mfd/bd9571mwv.txt
@@ -3,7 +3,6 @@
Required properties:
- compatible : Should be "rohm,bd9571mwv".
- reg : I2C slave address.
- - interrupt-parent : Phandle to the parent interrupt controller.
- interrupts : The interrupt line the device is connected to.
- interrupt-controller : Marks the device node as an interrupt controller.
- #interrupt-cells : The number of cells to describe an IRQ, should be 2.
diff --git a/Documentation/devicetree/bindings/mfd/bfticu.txt b/Documentation/devicetree/bindings/mfd/bfticu.txt
index 65c9077..538192f 100644
--- a/Documentation/devicetree/bindings/mfd/bfticu.txt
+++ b/Documentation/devicetree/bindings/mfd/bfticu.txt
@@ -10,7 +10,6 @@
- interrupts: the main IRQ line to signal the collected IRQs
- #interrupt-cells : is 2 and their usage is compliant to the 2 cells variant
of Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-- interrupt-parent: the parent IRQ ctrl the main IRQ is connected to
- reg: access on the parent local bus (chip select, offset in chip select, size)
Example:
diff --git a/Documentation/devicetree/bindings/mfd/da9055.txt b/Documentation/devicetree/bindings/mfd/da9055.txt
index 6dab34d..131a532 100644
--- a/Documentation/devicetree/bindings/mfd/da9055.txt
+++ b/Documentation/devicetree/bindings/mfd/da9055.txt
@@ -22,8 +22,6 @@
Required properties:
- compatible : Should be "dlg,da9055-pmic"
- reg: Specifies the I2C slave address (defaults to 0x5a but can be modified)
-- interrupt-parent: Specifies the phandle of the interrupt controller to which
- the IRQs from da9055 are delivered to.
- interrupts: IRQ line info for da9055 chip.
- interrupt-controller: da9055 has internal IRQs (has own IRQ domain).
- #interrupt-cells: Should be 1, is the local IRQ number for da9055.
diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt b/Documentation/devicetree/bindings/mfd/da9062.txt
index c0a418c..edca653 100644
--- a/Documentation/devicetree/bindings/mfd/da9062.txt
+++ b/Documentation/devicetree/bindings/mfd/da9062.txt
@@ -32,8 +32,6 @@
"dlg,da9061" for DA9061
- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be
modified to match the chip's OTP settings).
-- interrupt-parent : Specifies the reference to the interrupt controller for
- the DA9062 or DA9061.
- interrupts : IRQ line information.
- interrupt-controller
diff --git a/Documentation/devicetree/bindings/mfd/da9063.txt b/Documentation/devicetree/bindings/mfd/da9063.txt
index 443e682..8da8799 100644
--- a/Documentation/devicetree/bindings/mfd/da9063.txt
+++ b/Documentation/devicetree/bindings/mfd/da9063.txt
@@ -16,8 +16,6 @@
- compatible : Should be "dlg,da9063" or "dlg,da9063l"
- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be
modified to match the chip's OTP settings).
-- interrupt-parent : Specifies the reference to the interrupt controller for
- the DA9063.
- interrupts : IRQ line information.
- interrupt-controller
diff --git a/Documentation/devicetree/bindings/mfd/da9150.txt b/Documentation/devicetree/bindings/mfd/da9150.txt
index fd4dca7..f09b41f 100644
--- a/Documentation/devicetree/bindings/mfd/da9150.txt
+++ b/Documentation/devicetree/bindings/mfd/da9150.txt
@@ -13,8 +13,6 @@
Required properties:
- compatible : Should be "dlg,da9150"
- reg: Specifies the I2C slave address
-- interrupt-parent: Specifies the phandle of the interrupt controller to which
- the IRQs from da9150 are delivered to.
- interrupts: IRQ line info for da9150 chip.
- interrupt-controller: da9150 has internal IRQs (own IRQ domain).
(See ../interrupt-controller/interrupts.txt for
diff --git a/Documentation/devicetree/bindings/mfd/max14577.txt b/Documentation/devicetree/bindings/mfd/max14577.txt
index 236264c..fc6f0f4 100644
--- a/Documentation/devicetree/bindings/mfd/max14577.txt
+++ b/Documentation/devicetree/bindings/mfd/max14577.txt
@@ -11,7 +11,6 @@
- compatible : Must be "maxim,max14577" or "maxim,max77836".
- reg : I2C slave address for the max14577 chip (0x25 for max14577/max77836)
- interrupts : IRQ line for the chip.
-- interrupt-parent : The parent interrupt controller.
Required nodes:
diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt
index 0f2587fa..42968b7 100644
--- a/Documentation/devicetree/bindings/mfd/max77686.txt
+++ b/Documentation/devicetree/bindings/mfd/max77686.txt
@@ -15,7 +15,6 @@
- compatible : Must be "maxim,max77686";
- reg : Specifies the i2c slave address of PMIC block.
- interrupts : This i2c device has an IRQ line connected to the main SoC.
-- interrupt-parent : The parent interrupt controller.
Example:
diff --git a/Documentation/devicetree/bindings/mfd/max77693.txt b/Documentation/devicetree/bindings/mfd/max77693.txt
index e675497..a3c60a7 100644
--- a/Documentation/devicetree/bindings/mfd/max77693.txt
+++ b/Documentation/devicetree/bindings/mfd/max77693.txt
@@ -14,7 +14,6 @@
- compatible : Must be "maxim,max77693".
- reg : Specifies the i2c slave address of PMIC block.
- interrupts : This i2c device has an IRQ line connected to the main SoC.
-- interrupt-parent : The parent interrupt controller.
Optional properties:
- regulators : The regulators of max77693 have to be instantiated under subnode
diff --git a/Documentation/devicetree/bindings/mfd/max77802.txt b/Documentation/devicetree/bindings/mfd/max77802.txt
index f2f3fe7..09decac 100644
--- a/Documentation/devicetree/bindings/mfd/max77802.txt
+++ b/Documentation/devicetree/bindings/mfd/max77802.txt
@@ -14,7 +14,6 @@
- compatible : Must be "maxim,max77802"
- reg : Specifies the I2C slave address of PMIC block.
- interrupts : I2C device IRQ line connected to the main SoC.
-- interrupt-parent : The parent interrupt controller.
Example:
diff --git a/Documentation/devicetree/bindings/mfd/max8998.txt b/Documentation/devicetree/bindings/mfd/max8998.txt
index 23a3650..5f2f07c 100644
--- a/Documentation/devicetree/bindings/mfd/max8998.txt
+++ b/Documentation/devicetree/bindings/mfd/max8998.txt
@@ -20,8 +20,6 @@
- reg: Specifies the i2c slave address of the pmic block. It should be 0x66.
Optional properties:
-- interrupt-parent: Specifies the phandle of the interrupt controller to which
- the interrupts from MAX8998 are routed to.
- interrupts: Interrupt specifiers for two interrupt sources.
- First interrupt specifier is for main interrupt.
- Second interrupt specifier is for power-on/-off interrupt.
diff --git a/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt b/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt
index c639705..5ddcc8f 100644
--- a/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt
+++ b/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt
@@ -3,7 +3,6 @@
Required properties:
- compatible : One or both of "motorola,cpcap" or "ste,6556002"
- reg : SPI chip select
-- interrupt-parent : The parent interrupt controller
- interrupts : The interrupt line the device is connected to
- interrupt-controller : Marks the device node as an interrupt controller
- #interrupt-cells : The number of cells to describe an IRQ, should be 2
diff --git a/Documentation/devicetree/bindings/mfd/palmas.txt b/Documentation/devicetree/bindings/mfd/palmas.txt
index 8ae1a32..e736ab3 100644
--- a/Documentation/devicetree/bindings/mfd/palmas.txt
+++ b/Documentation/devicetree/bindings/mfd/palmas.txt
@@ -25,7 +25,6 @@
The first cell is the IRQ number.
The second cell is the flags, encoded as the trigger masks from
Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-- interrupt-parent : The parent interrupt controller.
Optional properties:
ti,mux-padX : set the pad register X (1-2) to the correct muxing for the
diff --git a/Documentation/devicetree/bindings/mfd/retu.txt b/Documentation/devicetree/bindings/mfd/retu.txt
index 8762423..df3005dd 100644
--- a/Documentation/devicetree/bindings/mfd/retu.txt
+++ b/Documentation/devicetree/bindings/mfd/retu.txt
@@ -9,7 +9,6 @@
- compatible: "nokia,retu" or "nokia,tahvo"
- reg: Specifies the CBUS slave address of the ASIC chip
- interrupts: The interrupt line the device is connected to
-- interrupt-parent: The parent interrupt controller
Example:
diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt b/Documentation/devicetree/bindings/mfd/rk808.txt
index 91b6522..1683ec3 100644
--- a/Documentation/devicetree/bindings/mfd/rk808.txt
+++ b/Documentation/devicetree/bindings/mfd/rk808.txt
@@ -10,7 +10,6 @@
- compatible: "rockchip,rk808"
- compatible: "rockchip,rk818"
- reg: I2C slave address
-- interrupt-parent: The parent interrupt controller.
- interrupts: the interrupt outputs of the controller.
- #clock-cells: from common clock binding; shall be set to 1 (multiple clock
outputs). See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
diff --git a/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt b/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
index cdd079b..c68cdd3 100644
--- a/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
+++ b/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
@@ -31,8 +31,6 @@
- reg: Specifies the I2C slave address of the pmic block. It should be 0x66.
Optional properties:
- - interrupt-parent: Specifies the phandle of the interrupt controller to which
- the interrupts from s2mps11 are delivered to.
- interrupts: Interrupt specifiers for interrupt sources.
- samsung,s2mps11-wrstbi-ground: Indicates that WRSTBI pin of PMIC is pulled
down. When the system is suspended it will always go down thus triggerring
diff --git a/Documentation/devicetree/bindings/mfd/stmpe.txt b/Documentation/devicetree/bindings/mfd/stmpe.txt
index f9065a5..c797c05 100644
--- a/Documentation/devicetree/bindings/mfd/stmpe.txt
+++ b/Documentation/devicetree/bindings/mfd/stmpe.txt
@@ -10,7 +10,6 @@
Optional properties:
- interrupts : The interrupt outputs from the controller
- interrupt-controller : Marks the device node as an interrupt controller
- - interrupt-parent : Specifies which IRQ controller we're connected to
- wakeup-source : Marks the input device as wakable
- st,autosleep-timeout : Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024
- irq-gpio : If present, which GPIO to use for event IRQ
diff --git a/Documentation/devicetree/bindings/mfd/tc3589x.txt b/Documentation/devicetree/bindings/mfd/tc3589x.txt
index 23fc2f2..4f22b2b 100644
--- a/Documentation/devicetree/bindings/mfd/tc3589x.txt
+++ b/Documentation/devicetree/bindings/mfd/tc3589x.txt
@@ -15,7 +15,6 @@
- compatible : must be "toshiba,tc35890", "toshiba,tc35892", "toshiba,tc35893",
"toshiba,tc35894", "toshiba,tc35895" or "toshiba,tc35896"
- reg : I2C address of the device
- - interrupt-parent : specifies which IRQ controller we're connected to
- interrupts : the interrupt on the parent the controller is connected to
- interrupt-controller : marks the device node as an interrupt controller
- #interrupt-cells : should be <1>, the first cell is the IRQ offset on this
diff --git a/Documentation/devicetree/bindings/mfd/tps65086.txt b/Documentation/devicetree/bindings/mfd/tps65086.txt
index 9cfa886..67eac0e 100644
--- a/Documentation/devicetree/bindings/mfd/tps65086.txt
+++ b/Documentation/devicetree/bindings/mfd/tps65086.txt
@@ -3,7 +3,6 @@
Required properties:
- compatible : Should be "ti,tps65086".
- reg : I2C slave address.
- - interrupt-parent : Phandle to the parent interrupt controller.
- interrupts : The interrupt line the device is connected to.
- interrupt-controller : Marks the device node as an interrupt controller.
- #interrupt-cells : The number of cells to describe an IRQ, should be 2.
diff --git a/Documentation/devicetree/bindings/mfd/tps65912.txt b/Documentation/devicetree/bindings/mfd/tps65912.txt
index 717e66d..8becb18 100644
--- a/Documentation/devicetree/bindings/mfd/tps65912.txt
+++ b/Documentation/devicetree/bindings/mfd/tps65912.txt
@@ -3,7 +3,6 @@
Required properties:
- compatible : Should be "ti,tps65912".
- reg : Slave address or chip select number (I2C / SPI).
- - interrupt-parent : The parent interrupt controller.
- interrupts : The interrupt line the device is connected to.
- interrupt-controller : Marks the device node as an interrupt controller.
- #interrupt-cells : The number of cells to describe an IRQ, should be 2.
diff --git a/Documentation/devicetree/bindings/mfd/twl-familly.txt b/Documentation/devicetree/bindings/mfd/twl-familly.txt
index a66fcf9..56f244b 100644
--- a/Documentation/devicetree/bindings/mfd/twl-familly.txt
+++ b/Documentation/devicetree/bindings/mfd/twl-familly.txt
@@ -16,7 +16,6 @@
- interrupt-controller : Since the twl support several interrupts internally,
it is considered as an interrupt controller cascaded to the SoC one.
- #interrupt-cells = <1>;
-- interrupt-parent : The parent interrupt controller.
Optional node:
- Child nodes contain in the twl. The twl family is made of several variants
diff --git a/Documentation/devicetree/bindings/mfd/twl6040.txt b/Documentation/devicetree/bindings/mfd/twl6040.txt
index 9a98ee7..06e9dd7 100644
--- a/Documentation/devicetree/bindings/mfd/twl6040.txt
+++ b/Documentation/devicetree/bindings/mfd/twl6040.txt
@@ -9,7 +9,6 @@
- compatible : "ti,twl6040" for twl6040, "ti,twl6041" for twl6041
- reg: must be 0x4b for i2c address
- interrupts: twl6040 has one interrupt line connecteded to the main SoC
-- interrupt-parent: The parent interrupt controller
- gpio-controller:
- #gpio-cells = <1>: twl6040 provides GPO lines.
- #clock-cells = <0>; twl6040 is a provider of pdmclk which is used by McPDM
diff --git a/Documentation/devicetree/bindings/mfd/wm831x.txt b/Documentation/devicetree/bindings/mfd/wm831x.txt
index 5057094..6b84b1b 100644
--- a/Documentation/devicetree/bindings/mfd/wm831x.txt
+++ b/Documentation/devicetree/bindings/mfd/wm831x.txt
@@ -22,7 +22,6 @@
- interrupts : The interrupt line the IRQ signal for the device is
connected to.
- - interrupt-parent : The parent interrupt controller.
- interrupt-controller : wm831x devices contain interrupt controllers and
may provide interrupt services to other devices.
diff --git a/Documentation/devicetree/bindings/mips/cavium/cib.txt b/Documentation/devicetree/bindings/mips/cavium/cib.txt
index f39a1aa..410efa3 100644
--- a/Documentation/devicetree/bindings/mips/cavium/cib.txt
+++ b/Documentation/devicetree/bindings/mips/cavium/cib.txt
@@ -13,8 +13,6 @@
- cavium,max-bits: The index (zero based) of the highest numbered bit
in the CIB block.
-- interrupt-parent: Always the CIU on the SoC.
-
- interrupts: The CIU line to which the CIB block is connected.
- #interrupt-cells: Must be <2>. The first cell is the bit within the
diff --git a/Documentation/devicetree/bindings/misc/aspeed,cvic.txt b/Documentation/devicetree/bindings/misc/aspeed,cvic.txt
new file mode 100644
index 0000000..d62c783
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/aspeed,cvic.txt
@@ -0,0 +1,35 @@
+* ASPEED AST2400 and AST2500 coprocessor interrupt controller
+
+This file describes the bindings for the interrupt controller present
+in the AST2400 and AST2500 BMC SoCs which provides interrupt to the
+ColdFire coprocessor.
+
+It is not a normal interrupt controller and it would be rather
+inconvenient to create an interrupt tree for it as it somewhat shares
+some of the same sources as the main ARM interrupt controller but with
+different numbers.
+
+The AST2500 supports a SW generated interrupt
+
+Required properties:
+- reg: address and length of the register for the device.
+- compatible: "aspeed,cvic" and one of:
+ "aspeed,ast2400-cvic"
+ or
+ "aspeed,ast2500-cvic"
+
+- valid-sources: One cell, bitmap of supported sources for the implementation
+
+Optional properties;
+- copro-sw-interrupts: List of interrupt numbers that can be used as
+ SW interrupts from the ARM to the coprocessor.
+ (AST2500 only)
+
+Example:
+
+ cvic: copro-interrupt-controller@1e6c2000 {
+ compatible = "aspeed,ast2500-cvic";
+ valid-sources = <0xffffffff>;
+ copro-sw-interrupts = <1>;
+ reg = <0x1e6c2000 0x80>;
+ };
diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
index 60481bf..5f3c025 100644
--- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
+++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
@@ -19,8 +19,6 @@
- clocks: From clock bindings: Handles to clock inputs.
- clock-names: From clock bindings: Tuple including "clk_xin" and "clk_ahb"
- interrupts: Interrupt specifier
- - interrupt-parent: Phandle for the interrupt controller that services
- interrupts for this device.
Required Properties for "arasan,sdhci-5.1":
- phys: From PHY bindings: Phandle for the Generic PHY for arasan.
diff --git a/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt
index a2cf5e1..99c5cf8 100644
--- a/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt
+++ b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt
@@ -21,7 +21,6 @@
"fsl,ls1043a-esdhc"
"fsl,ls1046a-esdhc"
"fsl,ls2080a-esdhc"
- - interrupt-parent : interrupt source phandle.
- clock-frequency : specifies eSDHC base clock frequency.
Optional properties:
diff --git a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt
index 0e5e2ec..75486cc 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt
@@ -13,8 +13,6 @@
- gpios : may specify GPIOs in this order: Card-Detect GPIO,
Write-Protect GPIO. Note that this does not follow the
binding from mmc.txt, for historical reasons.
-- interrupt-parent : the phandle for the interrupt controller that
- services interrupts for this device.
Example:
diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
index b40f3a4..bcda1df 100644
--- a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
+++ b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
@@ -42,7 +42,6 @@
May be "nand", if the SoC has the individual NAND
interrupts multiplexed behind another custom piece of
hardware
-- interrupt-parent : See standard interrupt bindings
- #address-cells : <1> - subnodes give the chip-select number
- #size-cells : <0>
diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
index dd55904..c059ab7 100644
--- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
@@ -16,7 +16,6 @@
- compatible: "ti,omap2-nand"
- reg: range id (CS number), base offset and length of the
NAND I/O space
- - interrupt-parent: must point to gpmc node
- interrupts: Two interrupt specifiers, one for fifoevent, one for termcount.
Optional properties:
diff --git a/Documentation/devicetree/bindings/mtd/spear_smi.txt b/Documentation/devicetree/bindings/mtd/spear_smi.txt
index 7248aad..c41873e 100644
--- a/Documentation/devicetree/bindings/mtd/spear_smi.txt
+++ b/Documentation/devicetree/bindings/mtd/spear_smi.txt
@@ -5,8 +5,6 @@
- reg : Address range of the mtd chip
- #address-cells, #size-cells : Must be present if the device has sub-nodes
representing partitions.
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
- interrupts: Should contain the STMMAC interrupts
- clock-rate : Functional clock rate of SMI in Hz
diff --git a/Documentation/devicetree/bindings/net/amd-xgbe.txt b/Documentation/devicetree/bindings/net/amd-xgbe.txt
index 4bb624a..93dcb79 100644
--- a/Documentation/devicetree/bindings/net/amd-xgbe.txt
+++ b/Documentation/devicetree/bindings/net/amd-xgbe.txt
@@ -8,8 +8,6 @@
- SerDes Rx/Tx registers
- SerDes integration registers (1/2)
- SerDes integration registers (2/2)
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
- interrupts: Should contain the amd-xgbe interrupt(s). The first interrupt
listed is required and is the general device interrupt. If the optional
amd,per-channel-interrupt property is specified, then one additional
diff --git a/Documentation/devicetree/bindings/net/btusb.txt b/Documentation/devicetree/bindings/net/btusb.txt
index 9c5e663..37d6792 100644
--- a/Documentation/devicetree/bindings/net/btusb.txt
+++ b/Documentation/devicetree/bindings/net/btusb.txt
@@ -15,7 +15,6 @@
Optional properties:
- - interrupt-parent: phandle of the parent interrupt controller
- interrupt-names: (see below)
- interrupts : The interrupt specified by the name "wakeup" is the interrupt
that shall be used for out-of-band wake-on-bt. Driver will
diff --git a/Documentation/devicetree/bindings/net/can/holt_hi311x.txt b/Documentation/devicetree/bindings/net/can/holt_hi311x.txt
index 23aa94e..903a78d 100644
--- a/Documentation/devicetree/bindings/net/can/holt_hi311x.txt
+++ b/Documentation/devicetree/bindings/net/can/holt_hi311x.txt
@@ -5,7 +5,6 @@
- "holt,hi3110" for HI-3110
- reg: SPI chip select.
- clocks: The clock feeding the CAN controller.
- - interrupt-parent: The parent interrupt controller.
- interrupts: Should contain IRQ line for the CAN controller.
Optional properties:
diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt b/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt
index ee3723b..188c8bd 100644
--- a/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt
+++ b/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt
@@ -6,7 +6,6 @@
- "microchip,mcp2515" for MCP2515.
- reg: SPI chip select.
- clocks: The clock feeding the CAN controller.
- - interrupt-parent: The parent interrupt controller.
- interrupts: Should contain IRQ line for the CAN controller.
Optional properties:
diff --git a/Documentation/devicetree/bindings/net/can/xilinx_can.txt b/Documentation/devicetree/bindings/net/can/xilinx_can.txt
index fe38847..9264d2f 100644
--- a/Documentation/devicetree/bindings/net/can/xilinx_can.txt
+++ b/Documentation/devicetree/bindings/net/can/xilinx_can.txt
@@ -9,7 +9,6 @@
CANPS registers map.
- interrupts : Property with a value describing the interrupt
number.
-- interrupt-parent : Must be core interrupt controller
- clock-names : List of input clock names - "can_clk", "pclk"
(For CANPS), "can_clk" , "s_axi_aclk"(For AXI CAN)
(See clock bindings for details).
diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt
index 4cb4925..4108936 100644
--- a/Documentation/devicetree/bindings/net/cpsw.txt
+++ b/Documentation/devicetree/bindings/net/cpsw.txt
@@ -11,7 +11,6 @@
registers map
- interrupts : property with a value describing the interrupt
number
-- interrupt-parent : The parent interrupt controller
- cpdma_channels : Specifies number of channels in CPDMA
- ale_entries : Specifies No of entries ALE can hold
- bd_ram_size : Specifies internal descriptor RAM size
diff --git a/Documentation/devicetree/bindings/net/davicom-dm9000.txt b/Documentation/devicetree/bindings/net/davicom-dm9000.txt
index 5224bf0..64c159e 100644
--- a/Documentation/devicetree/bindings/net/davicom-dm9000.txt
+++ b/Documentation/devicetree/bindings/net/davicom-dm9000.txt
@@ -5,7 +5,6 @@
- reg : physical addresses and sizes of registers, must contain 2 entries:
first entry : address register,
second entry : data register.
-- interrupt-parent : interrupt controller to which the device is connected
- interrupts : interrupt specifier specific to interrupt controller
Optional properties:
diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.txt b/Documentation/devicetree/bindings/net/dsa/marvell.txt
index 60d50a2..feb007a 100644
--- a/Documentation/devicetree/bindings/net/dsa/marvell.txt
+++ b/Documentation/devicetree/bindings/net/dsa/marvell.txt
@@ -30,7 +30,6 @@
Optional properties:
- reset-gpios : Should be a gpio specifier for a reset line
-- interrupt-parent : Parent interrupt controller
- interrupts : Interrupt from the switch
- interrupt-controller : Indicates the switch is itself an interrupt
controller. This is used for the PHY interrupts.
diff --git a/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt b/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
index abfbeec..8ee4b1c 100644
--- a/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
+++ b/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
@@ -9,7 +9,6 @@
"6port-16rss",
"6port-16vf",
"single-port".
-- interrupt-parent: the interrupt parent of this device.
- interrupts: should contain the DSA Fabric and rcb interrupt.
- reg: specifies base physical address(es) and size of the device registers.
The first region is external interface control register base and size(optional,
diff --git a/Documentation/devicetree/bindings/net/ibm,emac.txt b/Documentation/devicetree/bindings/net/ibm,emac.txt
index 44b842b..c0c14aa 100644
--- a/Documentation/devicetree/bindings/net/ibm,emac.txt
+++ b/Documentation/devicetree/bindings/net/ibm,emac.txt
@@ -18,7 +18,6 @@
"ibm,emac4". For Axon, thus, we have: "ibm,emac-axon",
"ibm,emac4"
- interrupts : <interrupt mapping for EMAC IRQ and WOL IRQ>
- - interrupt-parent : optional, if needed for interrupt mapping
- reg : <registers mapping>
- local-mac-address : 6 bytes, MAC address
- mal-device : phandle of the associated McMAL node
diff --git a/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt b/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt
index 3d27c68..957e5e5 100644
--- a/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt
+++ b/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt
@@ -22,7 +22,6 @@
- marvell,wakeup-gap-ms: wakeup gap represents wakeup latency of the host
platform. The value will be configured to firmware. This
is needed to work chip's sleep feature as expected (u16).
- - interrupt-parent: phandle of the parent interrupt controller
- interrupt-names: Used only for USB based devices (See below)
- interrupts : specifies the interrupt pin number to the cpu. For SDIO, the
driver will use the first interrupt specified in the interrupt
diff --git a/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt b/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt
index aa63130..358fed2 100644
--- a/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt
+++ b/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt
@@ -6,8 +6,6 @@
Required properties:
- compatible: Should be "mediatek,mt7620-gsw" or "mediatek,mt7621-gsw"
- reg: Address and length of the register set for the device
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
- interrupts: Should contain the gigabit switches interrupt
- resets: Should contain the gigabit switches resets
- reset-names: Should contain the reset names "gsw"
diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt
index 53c13ee..503f2b9 100644
--- a/Documentation/devicetree/bindings/net/mediatek-net.txt
+++ b/Documentation/devicetree/bindings/net/mediatek-net.txt
@@ -30,9 +30,6 @@
- mediatek,pctl: phandle to the syscon node that handles the ports slew rate
and driver current: only for MT2701 and MT7623 SoC
-Optional properties:
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
* Ethernet MAC node
Required properties:
diff --git a/Documentation/devicetree/bindings/net/microchip,enc28j60.txt b/Documentation/devicetree/bindings/net/microchip,enc28j60.txt
index 44dff53..24626e0 100644
--- a/Documentation/devicetree/bindings/net/microchip,enc28j60.txt
+++ b/Documentation/devicetree/bindings/net/microchip,enc28j60.txt
@@ -8,9 +8,6 @@
Required properties:
- compatible: Should be "microchip,enc28j60"
- reg: Specify the SPI chip select the ENC28J60 is wired to
-- interrupt-parent: Specify the phandle of the source interrupt, see interrupt
- binding documentation for details. Usually this is the GPIO bank
- the interrupt line is wired to.
- interrupts: Specify the interrupt index within the interrupt controller (referred
to above in interrupt-parent) and interrupt type. The ENC28J60 natively
generates falling edge interrupts, however, additional board logic
diff --git a/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt b/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt
index 9248673..cfaf889 100644
--- a/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt
+++ b/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt
@@ -4,7 +4,6 @@
- compatible: Should be "nxp,nxp-nci-i2c".
- clock-frequency: I²C work frequency.
- reg: address on the bus
-- interrupt-parent: phandle for the interrupt gpio controller
- interrupts: GPIO interrupt to which the chip is connected
- enable-gpios: Output GPIO pin used for enabling/disabling the chip
- firmware-gpios: Output GPIO pin used to enter firmware download mode
diff --git a/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt b/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt
index 122460e..2efe388 100644
--- a/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt
+++ b/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt
@@ -4,7 +4,6 @@
- compatible: Should be "nxp,pn532-i2c" or "nxp,pn533-i2c".
- clock-frequency: I²C work frequency.
- reg: address on the bus
-- interrupt-parent: phandle for the interrupt gpio controller
- interrupts: GPIO interrupt to which the chip is connected
Optional SoC Specific Properties:
diff --git a/Documentation/devicetree/bindings/net/nfc/pn544.txt b/Documentation/devicetree/bindings/net/nfc/pn544.txt
index 538a86f..5b93740 100644
--- a/Documentation/devicetree/bindings/net/nfc/pn544.txt
+++ b/Documentation/devicetree/bindings/net/nfc/pn544.txt
@@ -4,7 +4,6 @@
- compatible: Should be "nxp,pn544-i2c".
- clock-frequency: I²C work frequency.
- reg: address on the bus
-- interrupt-parent: phandle for the interrupt gpio controller
- interrupts: GPIO interrupt to which the chip is connected
- enable-gpios: Output GPIO pin used for enabling/disabling the PN544
- firmware-gpios: Output GPIO pin used to enter firmware download mode
diff --git a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt
index ed5b3ea..f02f6fb 100644
--- a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt
+++ b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt
@@ -3,7 +3,6 @@
Required properties:
- compatible: Should be "samsung,s3fwrn5-i2c".
- reg: address on the bus
-- interrupt-parent: phandle for the interrupt gpio controller
- interrupts: GPIO interrupt to which the chip is connected
- s3fwrn5,en-gpios: Output GPIO pin used for enabling/disabling the chip
- s3fwrn5,fw-gpios: Output GPIO pin used to enter firmware mode and
diff --git a/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt b/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt
index b46d473..baa8f81 100644
--- a/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt
+++ b/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt
@@ -4,7 +4,6 @@
- compatible: Should be "st,st21nfcb-i2c" or "st,st21nfcc-i2c".
- clock-frequency: I²C work frequency.
- reg: address on the bus
-- interrupt-parent: phandle for the interrupt gpio controller
- interrupts: GPIO interrupt to which the chip is connected
- reset-gpios: Output GPIO pin used to reset the ST21NFCB
diff --git a/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt b/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt
index 54ce8e7..d333433 100644
--- a/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt
+++ b/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt
@@ -3,7 +3,6 @@
Required properties:
- compatible: Should be "st,st21nfcb-spi"
- spi-max-frequency: Maximum SPI frequency (<= 4000000).
-- interrupt-parent: phandle for the interrupt gpio controller
- interrupts: GPIO interrupt to which the chip is connected
- reset-gpios: Output GPIO pin used to reset the ST21NFCB
diff --git a/Documentation/devicetree/bindings/net/nfc/st21nfca.txt b/Documentation/devicetree/bindings/net/nfc/st21nfca.txt
index 5ee9440..b8bd90f 100644
--- a/Documentation/devicetree/bindings/net/nfc/st21nfca.txt
+++ b/Documentation/devicetree/bindings/net/nfc/st21nfca.txt
@@ -4,8 +4,6 @@
- compatible: Should be "st,st21nfca-i2c".
- clock-frequency: I²C work frequency.
- reg: address on the bus
-- interrupt-parent: phandle for the interrupt gpio controller
-- interrupts: GPIO interrupt to which the chip is connected
- enable-gpios: Output GPIO pin used for enabling/disabling the ST21NFCA
Optional SoC Specific Properties:
diff --git a/Documentation/devicetree/bindings/net/nfc/st95hf.txt b/Documentation/devicetree/bindings/net/nfc/st95hf.txt
index 08a202e..3f373a1 100644
--- a/Documentation/devicetree/bindings/net/nfc/st95hf.txt
+++ b/Documentation/devicetree/bindings/net/nfc/st95hf.txt
@@ -17,9 +17,6 @@
- enable-gpio: GPIO line to enable ST95HF transceiver.
-- interrupt-parent : Standard way to specify the controller to which
- ST95HF transceiver's interrupt is routed.
-
- interrupts : Standard way to define ST95HF transceiver's out
interrupt.
diff --git a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
index 5ca9362..ba1934b 100644
--- a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
+++ b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
@@ -3,7 +3,6 @@
Required properties:
- compatible: Should be "ti,trf7970a".
- spi-max-frequency: Maximum SPI frequency (<= 2000000).
-- interrupt-parent: phandle of parent interrupt handler.
- interrupts: A single interrupt specifier.
- ti,enable-gpios: One or two GPIO entries used for 'EN' and 'EN2' pins on the
TRF7970A. EN2 is optional.
diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt
index d2169a5..17c1d2bd 100644
--- a/Documentation/devicetree/bindings/net/phy.txt
+++ b/Documentation/devicetree/bindings/net/phy.txt
@@ -3,8 +3,6 @@
Required properties:
- interrupts : interrupt specifier for the sole interrupt.
- - interrupt-parent : the phandle for the interrupt controller that
- services interrupts for this device.
- reg : The ID number for the phy, usually a small integer
Optional Properties:
diff --git a/Documentation/devicetree/bindings/net/qca,qca7000.txt b/Documentation/devicetree/bindings/net/qca,qca7000.txt
index 3987846..e4a8a51 100644
--- a/Documentation/devicetree/bindings/net/qca,qca7000.txt
+++ b/Documentation/devicetree/bindings/net/qca,qca7000.txt
@@ -19,7 +19,6 @@
- spi-cpol : Must be set
Optional properties:
-- interrupt-parent : Specify the pHandle of the source interrupt
- spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at.
Numbers smaller than 1000000 or greater than 16000000
are invalid. Missing the property will set the SPI
diff --git a/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt b/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt
index 88b095d..9fe1a0a 100644
--- a/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt
+++ b/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt
@@ -14,8 +14,6 @@
"ralink,rt3050-eth", "ralink,rt3883-eth", "ralink,rt5350-eth",
"mediatek,mt7620-eth", "mediatek,mt7621-eth"
- reg: Address and length of the register set for the device
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
- interrupts: Should contain the frame engines interrupt
- resets: Should contain the frame engines resets
- reset-names: Should contain the reset names "fe". If a switch is present
diff --git a/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt b/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt
index 2e79bd3..87e3158 100644
--- a/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt
+++ b/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt
@@ -7,8 +7,6 @@
Required properties:
- compatible: Should be "ralink,rt3050-esw"
- reg: Address and length of the register set for the device
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
- interrupts: Should contain the embedded switches interrupt
- resets: Should contain the embedded switches resets
- reset-names: Should contain the reset names "esw"
diff --git a/Documentation/devicetree/bindings/net/renesas,ravb.txt b/Documentation/devicetree/bindings/net/renesas,ravb.txt
index fac897d..19740d0 100644
--- a/Documentation/devicetree/bindings/net/renesas,ravb.txt
+++ b/Documentation/devicetree/bindings/net/renesas,ravb.txt
@@ -47,8 +47,6 @@
- pinctrl-0: phandle, referring to a default pin configuration node.
Optional properties:
-- interrupt-parent: the phandle for the interrupt controller that services
- interrupts for this device.
- interrupt-names: A list of interrupt names.
For the R-Car Gen 3 SoCs this property is mandatory;
it should include one entry per channel, named "ch%u",
diff --git a/Documentation/devicetree/bindings/net/samsung-sxgbe.txt b/Documentation/devicetree/bindings/net/samsung-sxgbe.txt
index 888c250..46e5911 100644
--- a/Documentation/devicetree/bindings/net/samsung-sxgbe.txt
+++ b/Documentation/devicetree/bindings/net/samsung-sxgbe.txt
@@ -3,8 +3,6 @@
Required properties:
- compatible: Should be "samsung,sxgbe-v2.0a"
- reg: Address and length of the register set for the device
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
- interrupts: Should contain the SXGBE interrupts
These interrupts are ordered by fixed and follows variable
trasmit DMA interrupts, receive DMA interrupts and lpi interrupt.
diff --git a/Documentation/devicetree/bindings/net/sh_eth.txt b/Documentation/devicetree/bindings/net/sh_eth.txt
index 82a4cf2..76db9f1 100644
--- a/Documentation/devicetree/bindings/net/sh_eth.txt
+++ b/Documentation/devicetree/bindings/net/sh_eth.txt
@@ -35,8 +35,6 @@
- pinctrl-0: phandle, referring to a default pin configuration node.
Optional properties:
-- interrupt-parent: the phandle for the interrupt controller that services
- interrupts for this device.
- pinctrl-names: pin configuration state name ("default").
- renesas,no-ether-link: boolean, specify when a board does not provide a proper
Ether LINK signal.
diff --git a/Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt b/Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt
index 21d27aa4..36f1aef 100644
--- a/Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt
+++ b/Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt
@@ -83,8 +83,6 @@
- "snps,dwc-qos-ethernet-4.10" (deprecated):
- "phy_ref_clk"
- "apb_clk"
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
- interrupts: Should contain the core's combined interrupt signal
- phy-mode: See ethernet.txt file in the same directory
- resets: Phandle and reset specifiers for each entry in reset-names, in the
diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
index 3a28a5d..8bdb1c2 100644
--- a/Documentation/devicetree/bindings/net/stmmac.txt
+++ b/Documentation/devicetree/bindings/net/stmmac.txt
@@ -4,8 +4,6 @@
- compatible: Should be "snps,dwmac-<ip_version>", "snps,dwmac"
For backwards compatibility: "st,spear600-gmac" is also supported.
- reg: Address and length of the register set for the device
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
- interrupts: Should contain the STMMAC interrupts
- interrupt-names: Should contain a list of interrupt names corresponding to
the interrupts in the interrupts property, if available.
diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt
index 86602f2..cffb2d6 100644
--- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt
+++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt
@@ -11,8 +11,6 @@
Optional properties:
- brcm,drive-strength : drive strength used for SDIO pins on device in mA
(default = 6).
- - interrupt-parent : the phandle for the interrupt controller to which the
- device interrupts are connected.
- interrupts : specifies attributes for the out-of-band interrupt (host-wake).
When not specified the device will use in-band SDIO interrupts.
- interrupt-names : name of the out-of-band interrupt, which must be set
diff --git a/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt
index 59de864..9bf9bba 100644
--- a/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt
+++ b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt
@@ -29,7 +29,6 @@
- marvell,wakeup-pin : a wakeup pin number of wifi chip which will be configured
to firmware. Firmware will wakeup the host using this pin
during suspend/resume.
- - interrupt-parent: phandle of the parent interrupt controller
- interrupts : interrupt pin number to the cpu. driver will request an irq based on
this interrupt number. during system suspend, the irq will be enabled
so that the wifi chip can wakeup host platform under certain condition.
diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
index 189ae5c..bb2fcde 100644
--- a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
+++ b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
@@ -8,8 +8,6 @@
- reg : Chip select address of device
- spi-max-frequency : Maximum SPI clocking speed of device in Hz
- interrupts : Should contain interrupt line
-- interrupt-parent : Should be the phandle for the interrupt controller
- that services interrupts for this device
- vio-supply : phandle to regulator providing VIO
- ti,power-gpio : GPIO connected to chip's PMEN pin
diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt b/Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt
index 8f9ced0..cb5c9e1 100644
--- a/Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt
+++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt
@@ -17,9 +17,7 @@
* "ti,wl1837"
- reg : Chip select address of device
- spi-max-frequency : Maximum SPI clocking speed of device in Hz
-- interrupt-parent, interrupts :
- Should contain parameters for 1 interrupt line.
- Interrupt parameters: parent, line number, type.
+- interrupts : Should contain parameters for 1 interrupt line.
- vwlan-supply : Point the node of the regulator that powers/enable the
wl12xx/wl18xx chip
diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt
index f42f6b0..9306c4d 100644
--- a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt
+++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt
@@ -20,8 +20,6 @@
- interrupts : specifies attributes for the out-of-band interrupt.
Optional properties:
- - interrupt-parent : the phandle for the interrupt controller to which the
- device interrupts are connected.
- ref-clock-frequency : ref clock frequency in Hz
- tcxo-clock-frequency : tcxo clock frequency in Hz
diff --git a/Documentation/devicetree/bindings/pci/altera-pcie-msi.txt b/Documentation/devicetree/bindings/pci/altera-pcie-msi.txt
index 09cd3bc..9514c32 100644
--- a/Documentation/devicetree/bindings/pci/altera-pcie-msi.txt
+++ b/Documentation/devicetree/bindings/pci/altera-pcie-msi.txt
@@ -7,7 +7,6 @@
- reg-names: must include the following entries:
"csr": CSR registers
"vector_slave": vectors slave port region
-- interrupt-parent: interrupt source phandle.
- interrupts: specifies the interrupt source of the parent interrupt
controller. The format of the interrupt specifier depends on the
parent interrupt controller.
diff --git a/Documentation/devicetree/bindings/pci/altera-pcie.txt b/Documentation/devicetree/bindings/pci/altera-pcie.txt
index a1dc936..6c396f1 100644
--- a/Documentation/devicetree/bindings/pci/altera-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/altera-pcie.txt
@@ -6,7 +6,6 @@
- reg-names: must include the following entries:
"Txs": TX slave port region
"Cra": Control register access region
-- interrupt-parent: interrupt source phandle.
- interrupts: specifies the interrupt source of the parent interrupt
controller. The format of the interrupt specifier depends
on the parent interrupt controller.
diff --git a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
index b8e48b4..df065aa 100644
--- a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
@@ -65,7 +65,6 @@
following properties in the MSI device node:
- compatible: Must be "brcm,iproc-msi"
- msi-controller: claims itself as an MSI controller
-- interrupt-parent: Link to its parent interrupt device
- interrupts: List of interrupt IDs from its parent interrupt device
Optional properties:
diff --git a/Documentation/devicetree/bindings/pci/faraday,ftpci100.txt b/Documentation/devicetree/bindings/pci/faraday,ftpci100.txt
index 89a84f8..5f8cb49 100644
--- a/Documentation/devicetree/bindings/pci/faraday,ftpci100.txt
+++ b/Documentation/devicetree/bindings/pci/faraday,ftpci100.txt
@@ -41,7 +41,6 @@
- For "faraday,ftpci100" a node representing the interrupt-controller inside the
host bridge is mandatory. It has the following mandatory properties:
- interrupt: see interrupt-controller/interrupts.txt
- - interrupt-parent: see interrupt-controller/interrupts.txt
- interrupt-controller: see interrupt-controller/interrupts.txt
- #address-cells: set to <0>
- #interrupt-cells: set to <1>
diff --git a/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt b/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
index 65038aa..a618d47 100644
--- a/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
@@ -26,9 +26,6 @@
- interrupt-controller: identifies the node as an interrupt controller
- #interrupt-cells: specifies the number of cells needed to encode an
interrupt source. The value must be 1.
-- interrupt-parent : phandle to the interrupt controller that
- it is attached to, it should be set to gic to point to
- ARM's Generic Interrupt Controller node in system DT.
- interrupts: The interrupt line of the PCIe controller
last cell of this field is set to 4 to
denote it as IRQ_TYPE_LEVEL_HIGH type interrupt.
diff --git a/Documentation/devicetree/bindings/pci/pci-keystone.txt b/Documentation/devicetree/bindings/pci/pci-keystone.txt
index 3d4a209..4dd17de 100644
--- a/Documentation/devicetree/bindings/pci/pci-keystone.txt
+++ b/Documentation/devicetree/bindings/pci/pci-keystone.txt
@@ -17,7 +17,6 @@
pcie_msi_intc : Interrupt controller device node for MSI IRQ chip
interrupt-cells: should be set to 1
- interrupt-parent: Parent interrupt controller phandle
interrupts: GIC interrupt lines connected to PCI MSI interrupt lines
Example:
@@ -37,8 +36,6 @@
pcie_intc: Interrupt controller device node for Legacy IRQ chip
interrupt-cells: should be set to 1
- interrupt-parent: Parent interrupt controller phandle
- interrupts: GIC interrupt lines connected to PCI Legacy interrupt lines
Example:
pcie_intc: legacy-interrupt-controller {
diff --git a/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt b/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt
index a04ab1b..ffba4f63d 100644
--- a/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt
+++ b/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt
@@ -41,9 +41,6 @@
- #interrupt-cells: specifies the number of cells needed to encode an
interrupt source. The value must be 1.
- - interrupt-parent: the phandle for the interrupt controller that
- services interrupts for this device.
-
- interrupts: specifies the interrupt source of the parent interrupt
controller. The format of the interrupt specifier depends on the
parent interrupt controller.
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.txt
index ecb5c0d..f4d06bb 100644
--- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.txt
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.txt
@@ -17,7 +17,7 @@
The macros for options are defined in the
include/dt-binding/pinctrl/pinctrl-tegra.h.
- nvidia,enable-input: Integer. Enable the pin's input path.
- enable :TEGRA_PIN_ENABLE0 and
+ enable :TEGRA_PIN_ENABLE and
disable or output only: TEGRA_PIN_DISABLE.
- nvidia,open-drain: Integer.
enable: TEGRA_PIN_ENABLE.
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.txt
index a62d82d..85f2114 100644
--- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.txt
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.txt
@@ -44,7 +44,7 @@
- nvidia,tristate: Integer.
0: drive, 1: tristate.
- nvidia,enable-input: Integer. Enable the pin's input path.
- enable :TEGRA_PIN_ENABLE0 and
+ enable :TEGRA_PIN_ENABLE and
disable or output only: TEGRA_PIN_DISABLE.
- nvidia,open-drain: Integer.
enable: TEGRA_PIN_ENABLE.
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt
index def8fca..3b69513 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt
@@ -16,8 +16,6 @@
- reg-names: A string describing the "reg" entries. Must contain "eint".
- interrupts : The interrupt output from the controller.
- #interrupt-cells: Should be two.
-- interrupt-parent: Phandle of the interrupt parent to which the external
- GPIO interrupts are forwarded to.
Please refer to pinctrl-bindings.txt in this directory for details of the
common pinctrl bindings used by client devices, including the meaning of the
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-sx150x.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-sx150x.txt
index bf76867..4023bad2 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-sx150x.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-sx150x.txt
@@ -25,8 +25,6 @@
- gpio-controller: Marks the device as a GPIO controller.
Optional properties :
-- interrupt-parent: phandle of the parent interrupt controller.
-
- interrupts: Interrupt specifier for the controllers interrupt.
- interrupt-controller: Marks the device as a interrupt controller.
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
index 843a6cb..70659c9 100644
--- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
@@ -124,8 +124,6 @@
A. External GPIO Interrupts: For supporting external gpio interrupts, the
following properties should be specified in the pin-controller device node.
- - interrupt-parent: phandle of the interrupt parent to which the external
- GPIO interrupts are forwarded to.
- interrupts: interrupt specifier for the controller. The format and value of
the interrupt specifier depends on the interrupt parent for the controller.
@@ -167,8 +165,6 @@
found on Samsung Exynos4210 and S5PC110/S5PV210 SoCs.
- samsung,exynos7-wakeup-eint: represents wakeup interrupt controller
found on Samsung Exynos7 SoC.
- - interrupt-parent: phandle of the interrupt parent to which the external
- wakeup interrupts are forwarded to.
- interrupts: interrupt used by multiplexed wakeup interrupts.
In addition, following properties must be present in node of every bank
@@ -188,8 +184,6 @@
Node of every bank of pins supporting direct wake-up interrupts (without
multiplexing) must contain following properties:
- - interrupt-parent: phandle of the interrupt parent to which the external
- wakeup interrupts are forwarded to.
- interrupts: interrupts of the interrupt parent which are used for external
wakeup interrupts from pins of the bank, must contain interrupts for all
pins of the bank.
diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
index 046a3de..ef4f2ff 100644
--- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
@@ -37,8 +37,6 @@
Optional properties:
- reset: : Reference to the reset controller
- - interrupt-parent: phandle of the interrupt parent to which the external
- GPIO interrupts are forwarded to.
- st,syscfg: Should be phandle/offset/mask.
-The phandle to the syscon node which includes IRQ mux selection register.
-The offset of the IRQ mux selection register
diff --git a/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt b/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt
index b86ecad..c7dfb7c 100644
--- a/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt
+++ b/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt
@@ -9,8 +9,6 @@
- interrupts: <a b> where a is the interrupt number and b is a
field that represents an encoding of the sense and level
information for the interrupt.
- - interrupt-parent: the phandle for the interrupt controller that
- services interrupts for this device.
Optional properties:
- active-semi,input-voltage-threshold-microvolt: unit: mV;
diff --git a/Documentation/devicetree/bindings/power/supply/bq24257.txt b/Documentation/devicetree/bindings/power/supply/bq24257.txt
index d693702..f8f5a16 100644
--- a/Documentation/devicetree/bindings/power/supply/bq24257.txt
+++ b/Documentation/devicetree/bindings/power/supply/bq24257.txt
@@ -6,8 +6,6 @@
* "ti,bq24251"
* "ti,bq24257"
- reg: integer, i2c address of the device.
-- interrupt-parent: Should be the phandle for the interrupt controller. Use in
- conjunction with "interrupts".
- interrupts: Interrupt mapping for GPIO IRQ (configure for both edges). Use in
conjunction with "interrupt-parent".
- ti,battery-regulation-voltage: integer, maximum charging voltage in uV.
diff --git a/Documentation/devicetree/bindings/power/supply/lp8727_charger.txt b/Documentation/devicetree/bindings/power/supply/lp8727_charger.txt
index 2246bc5..0355a4b 100644
--- a/Documentation/devicetree/bindings/power/supply/lp8727_charger.txt
+++ b/Documentation/devicetree/bindings/power/supply/lp8727_charger.txt
@@ -5,7 +5,6 @@
- reg: I2C slave address 27h
Optional properties:
-- interrupt-parent: interrupt controller node (see interrupt binding[0])
- interrupts: interrupt specifier (see interrupt binding[0])
- debounce-ms: interrupt debounce time. (u32)
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max14656.txt b/Documentation/devicetree/bindings/power/supply/maxim,max14656.txt
index d6e8dfd..f956247 100644
--- a/Documentation/devicetree/bindings/power/supply/maxim,max14656.txt
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max14656.txt
@@ -3,7 +3,6 @@
Required properties :
- compatible : "maxim,max14656";
- reg: i2c slave address
-- interrupt-parent: the phandle for the interrupt controller
- interrupts: interrupt line
Example:
diff --git a/Documentation/devicetree/bindings/power/supply/rt9455_charger.txt b/Documentation/devicetree/bindings/power/supply/rt9455_charger.txt
index 5d9ad5c..1e6107c 100644
--- a/Documentation/devicetree/bindings/power/supply/rt9455_charger.txt
+++ b/Documentation/devicetree/bindings/power/supply/rt9455_charger.txt
@@ -4,8 +4,6 @@
- compatible: it should contain one of the following:
"richtek,rt9455".
- reg: integer, i2c address of the device.
-- interrupt-parent: the phandle for the interrupt controller that
- services interrupts for this device.
- interrupts: interrupt mapping for GPIO IRQ, it should be
configured with IRQ_TYPE_LEVEL_LOW flag.
- richtek,output-charge-current: integer, output current from the charger to the
diff --git a/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt b/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt
index a371962..84e7415 100644
--- a/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt
+++ b/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt
@@ -7,8 +7,6 @@
specific registers.
Optional properties:
-- interrupt-parent: Should be the phandle for the interrupt controller. Use in
- conjunction with "interrupts".
- interrupts: Interrupt mapping for GPIO IRQ. Use in conjunction with
"interrupt-parent". If an interrupt is not provided the driver will switch
automatically to polling.
diff --git a/Documentation/devicetree/bindings/powerpc/4xx/akebono.txt b/Documentation/devicetree/bindings/powerpc/4xx/akebono.txt
index db93921..940fd78 100644
--- a/Documentation/devicetree/bindings/powerpc/4xx/akebono.txt
+++ b/Documentation/devicetree/bindings/powerpc/4xx/akebono.txt
@@ -19,7 +19,6 @@
- compatible : should be "ibm,476gtr-sdhci","generic-sdhci".
- reg : should contain the SDHCI registers location and length.
- - interrupt-parent : a phandle for the interrupt controller.
- interrupts : should contain the SDHCI interrupt.
1.b) The Advanced Host Controller Interface (AHCI) SATA node
@@ -30,7 +29,6 @@
- compatible : should be "ibm,476gtr-ahci".
- reg : should contain the AHCI registers location and length.
- - interrupt-parent : a phandle for the interrupt controller.
- interrupts : should contain the AHCI interrupt.
1.c) The FPGA node
diff --git a/Documentation/devicetree/bindings/powerpc/4xx/hsta.txt b/Documentation/devicetree/bindings/powerpc/4xx/hsta.txt
index c737c83..66dbd9f 100644
--- a/Documentation/devicetree/bindings/powerpc/4xx/hsta.txt
+++ b/Documentation/devicetree/bindings/powerpc/4xx/hsta.txt
@@ -13,7 +13,6 @@
Require properties:
- compatible : "ibm,476gtr-hsta-msi", "ibm,hsta-msi"
- reg : register mapping for the HSTA MSI space
-- interrupt-parent : parent controller for mapping interrupts
- interrupts : ordered interrupt mapping for each MSI in the register
space. The first interrupt should be associated with a
register offset of 0x00, the second to 0x10, etc.
diff --git a/Documentation/devicetree/bindings/powerpc/4xx/ppc440spe-adma.txt b/Documentation/devicetree/bindings/powerpc/4xx/ppc440spe-adma.txt
index 515ebcf..de6a5f7 100644
--- a/Documentation/devicetree/bindings/powerpc/4xx/ppc440spe-adma.txt
+++ b/Documentation/devicetree/bindings/powerpc/4xx/ppc440spe-adma.txt
@@ -38,7 +38,6 @@
2 sources: DMAx CS FIFO Needs Service IRQ (on UIC0)
and DMA Error IRQ (on UIC1). The latter is common
for both DMA engines>.
- - interrupt-parent : needed for interrupt mapping
Example:
@@ -65,7 +64,6 @@
- compatible : "amcc,xor-accelerator";
- reg : <registers mapping>
- interrupts : <interrupt mapping for XOR interrupt source>
- - interrupt-parent : for interrupt mapping
Example:
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/dcsr.txt b/Documentation/devicetree/bindings/powerpc/fsl/dcsr.txt
index 18a8810..4b01e1a 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/dcsr.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/dcsr.txt
@@ -84,13 +84,6 @@
Interrupt numbers are listed in order (perfmon, event0, event1).
- - interrupt-parent
- Usage: required
- Value type: <phandle>
- Definition: A single <phandle> value that points
- to the interrupt parent to which the child domain
- is being mapped. Value must be "&mpic"
-
- reg
Usage: required
Value type: <prop-encoded-array>
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/diu.txt b/Documentation/devicetree/bindings/powerpc/fsl/diu.txt
index b66cb6d..eb45db1 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/diu.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/diu.txt
@@ -8,8 +8,6 @@
- reg : should contain at least address and length of the DIU register
set.
- interrupts : one DIU interrupt should be described here.
-- interrupt-parent : the phandle for the interrupt controller that
- services interrupts for this device.
Optional properties:
- edid : verbatim EDID data block describing attached display.
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/dma.txt b/Documentation/devicetree/bindings/powerpc/fsl/dma.txt
index 7fc1b01..c11ad5c 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/dma.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/dma.txt
@@ -13,7 +13,6 @@
DMA channels and the address space of the DMA controller
- cell-index : controller index. 0 for controller @ 0x8100
- interrupts : interrupt specifier for DMA IRQ
-- interrupt-parent : optional, if needed for interrupt mapping
- DMA channel nodes:
- compatible : must include "fsl,elo-dma-channel"
@@ -25,7 +24,6 @@
- interrupts : interrupt specifier for DMA channel IRQ
(on 83xx this is expected to be identical to
the interrupts property of the parent node)
- - interrupt-parent : optional, if needed for interrupt mapping
Example:
dma@82a8 {
@@ -88,7 +86,6 @@
- cell-index : DMA channel index starts at 0.
- reg : DMA channel specific registers
- interrupts : interrupt specifier for DMA channel IRQ
- - interrupt-parent : optional, if needed for interrupt mapping
Example:
dma@21300 {
@@ -146,7 +143,6 @@
- compatible : must include "fsl,eloplus-dma-channel"
- reg : DMA channel specific registers
- interrupts : interrupt specifier for DMA channel IRQ
- - interrupt-parent : optional, if needed for interrupt mapping
Example:
dma@100300 {
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/ecm.txt b/Documentation/devicetree/bindings/powerpc/fsl/ecm.txt
index f514f29..76dc547 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/ecm.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/ecm.txt
@@ -57,8 +57,4 @@
Usage: required
Value type: <prop-encoded-array>
- - interrupt-parent
- Usage: required
- Value type: <phandle>
-
=====================================================================
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mcm.txt b/Documentation/devicetree/bindings/powerpc/fsl/mcm.txt
index 4ceda9b..a5dae6b 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/mcm.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mcm.txt
@@ -57,8 +57,4 @@
Usage: required
Value type: <prop-encoded-array>
- - interrupt-parent
- Usage: required
- Value type: <phandle>
-
=====================================================================
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt
index 6478175..5dfd68f 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt
@@ -18,8 +18,6 @@
- interrupts : <a b> where a is the interrupt number of the
PSC FIFO Controller and b is a field that represents an
encoding of the sense and level information for the interrupt.
- - interrupt-parent : the phandle for the interrupt controller that
- services interrupts for this device.
Recommended properties :
- fsl,rx-fifo-size : the size of the RX fifo slice (a multiple of 4)
@@ -45,8 +43,6 @@
- interrupts : <a b> where a is the interrupt number of the
PSC FIFO Controller and b is a field that represents an
encoding of the sense and level information for the interrupt.
- - interrupt-parent : the phandle for the interrupt controller that
- services interrupts for this device.
Recommended properties :
- clocks : specifies the clock needed to operate the fifo controller
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt b/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
index 82dd5b6..f8d2b7f 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
@@ -21,11 +21,6 @@
be set as edge sensitive. If msi-available-ranges is present, only
the interrupts that correspond to available ranges shall be present.
-- interrupt-parent: the phandle for the interrupt controller
- that services interrupts for this device. for 83xx cpu, the interrupts
- are routed to IPIC, and for 85xx/86xx cpu the interrupts are routed
- to MPIC.
-
Optional properties:
- msi-available-ranges: use <start count> style section to define which
msi interrupt can be used in the 256 msi interrupts. This property is
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/pamu.txt b/Documentation/devicetree/bindings/powerpc/fsl/pamu.txt
index c2b2899..b21ab85d 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/pamu.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/pamu.txt
@@ -32,8 +32,6 @@
A standard property. It represents the CCSR registers of
all child PAMUs combined. Include it to provide support
for legacy drivers.
-- interrupt-parent : <phandle>
- Phandle to interrupt controller
- fsl,portid-mapping : <u32>
The Coherency Subdomain ID Port Mapping Registers and
Snoop ID Port Mapping registers, which are part of the
diff --git a/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt b/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt
index a3dc4b9..c4d78f2 100644
--- a/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt
+++ b/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt
@@ -148,7 +148,6 @@
- reg : should contain the controller registers location and length
- interrupt-controller
- interrupts : should contain the cascade interrupt of the "flipper" pic
- - interrupt-parent: should contain the phandle of the "flipper" pic
1.l) The General Purpose I/O (GPIO) controller node
diff --git a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
index 5c186a7..6fe825b 100644
--- a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
@@ -32,8 +32,6 @@
'max8997,pmic-buck[1/2/5]-dvs-voltage' should be specified.
Optional properties:
-- interrupt-parent: Specifies the phandle of the interrupt controller to which
- the interrupts from max8997 are delivered to.
- interrupts: Interrupt specifiers for two interrupt sources.
- First interrupt specifier is for 'irq1' interrupt.
- Second interrupt specifier is for 'alert' interrupt.
diff --git a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt
index 9987281..84bc76a 100644
--- a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt
+++ b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt
@@ -18,7 +18,6 @@
ti,tps659038-pmic
and also the generic series names
ti,palmas-pmic
-- interrupt-parent : The parent interrupt controller which is palmas.
- interrupts : The interrupt number and the type which can be looked up here:
arch/arm/boot/dts/include/dt-bindings/interrupt-controller/irq.h
- interrupts-name: The names of the individual interrupts.
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,davinci-rproc.txt b/Documentation/devicetree/bindings/remoteproc/ti,davinci-rproc.txt
index e44a97e..25f8658 100644
--- a/Documentation/devicetree/bindings/remoteproc/ti,davinci-rproc.txt
+++ b/Documentation/devicetree/bindings/remoteproc/ti,davinci-rproc.txt
@@ -45,12 +45,6 @@
per the bindings in
Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
-Optional properties:
---------------------
-- interrupt-parent: phandle to the interrupt controller node. This property
- is needed if the device node hierarchy doesn't have an
- interrupt controller.
-
Example:
--------
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,keystone-rproc.txt b/Documentation/devicetree/bindings/remoteproc/ti,keystone-rproc.txt
index 1eb7287..461dc1d 100644
--- a/Documentation/devicetree/bindings/remoteproc/ti,keystone-rproc.txt
+++ b/Documentation/devicetree/bindings/remoteproc/ti,keystone-rproc.txt
@@ -51,12 +51,6 @@
Documentation/devicetree/bindings/reset/ti,sci-reset.txt
for 66AK2G SoCs
-- interrupt-parent: Should contain a phandle to the Keystone 2 IRQ controller
- IP node that is used by the ARM CorePac processor to
- receive interrupts from the DSP remote processors. See
- Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt
- for details.
-
- interrupts: Should contain an entry for each value in 'interrupt-names'.
Each entry should have the interrupt source number used by
the remote processor to the host processor. The values should
diff --git a/Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.txt b/Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.txt
index 1d990bc..d946f28 100644
--- a/Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.txt
+++ b/Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.txt
@@ -7,8 +7,6 @@
- compatible : should contain "brcm,brcmstb-waketimer"
- reg : the register start and length for the WKTMR block
- interrupts : The TIMER interrupt
-- interrupt-parent: The phandle to the Always-On (AON) Power Management (PM) L2
- interrupt controller node
- clocks : The phandle to the UPG fixed clock (27Mhz domain)
Example:
diff --git a/Documentation/devicetree/bindings/rtc/isil,isl12057.txt b/Documentation/devicetree/bindings/rtc/isil,isl12057.txt
index fbbdd92..ff7c435 100644
--- a/Documentation/devicetree/bindings/rtc/isil,isl12057.txt
+++ b/Documentation/devicetree/bindings/rtc/isil,isl12057.txt
@@ -25,9 +25,6 @@
- "wakeup-source": mark the chip as a wakeup source, independently of
the availability of an IRQ line connected to the SoC.
- - "interrupt-parent", "interrupts": for passing the interrupt line
- of the SoC connected to IRQ#2 of the RTC chip.
-
Example isl12057 node without IRQ#2 pin connected (no alarm support):
diff --git a/Documentation/devicetree/bindings/rtc/rtc-cmos.txt b/Documentation/devicetree/bindings/rtc/rtc-cmos.txt
index 7382989..b94b35f 100644
--- a/Documentation/devicetree/bindings/rtc/rtc-cmos.txt
+++ b/Documentation/devicetree/bindings/rtc/rtc-cmos.txt
@@ -7,7 +7,6 @@
Optional properties:
- interrupts : should contain interrupt.
- - interrupt-parent : interrupt source phandle.
- ctrl-reg : Contains the initial value of the control register also
called "Register B".
- freq-reg : Contains the initial value of the frequency register also
diff --git a/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt b/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt
index d28d6e7..226cc93 100644
--- a/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt
+++ b/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt
@@ -21,7 +21,6 @@
- reg: I2C bus address of the device
Optional properties:
-- interrupt-parent: phandle for the interrupt controller.
- interrupts: rtc alarm interrupt.
- clock-output-names: From common clock binding to override the default output
clock name
diff --git a/Documentation/devicetree/bindings/rtc/rtc-m41t80.txt b/Documentation/devicetree/bindings/rtc/rtc-m41t80.txt
index 717d938..c746cb2 100644
--- a/Documentation/devicetree/bindings/rtc/rtc-m41t80.txt
+++ b/Documentation/devicetree/bindings/rtc/rtc-m41t80.txt
@@ -16,7 +16,6 @@
- reg: I2C bus address of the device
Optional properties:
-- interrupt-parent: phandle for the interrupt controller.
- interrupts: rtc alarm interrupt.
- clock-output-names: From common clock binding to override the default output
clock name
diff --git a/Documentation/devicetree/bindings/rtc/rtc-omap.txt b/Documentation/devicetree/bindings/rtc/rtc-omap.txt
index bee41f9..062ebb1 100644
--- a/Documentation/devicetree/bindings/rtc/rtc-omap.txt
+++ b/Documentation/devicetree/bindings/rtc/rtc-omap.txt
@@ -11,7 +11,6 @@
- "ti,am4372-rtc" - for RTC IP used similar to that on AM437X SoC family.
- reg: Address range of rtc register set
- interrupts: rtc timer, alarm interrupts in order
-- interrupt-parent: phandle for the interrupt controller
Optional properties:
- system-power-controller: whether the rtc is controlling the system power
diff --git a/Documentation/devicetree/bindings/rtc/rtc-palmas.txt b/Documentation/devicetree/bindings/rtc/rtc-palmas.txt
index eb1c7fd..c6cf377 100644
--- a/Documentation/devicetree/bindings/rtc/rtc-palmas.txt
+++ b/Documentation/devicetree/bindings/rtc/rtc-palmas.txt
@@ -3,7 +3,6 @@
Required properties:
- compatible:
- "ti,palmas-rtc" for palma series of the RTC controller
-- interrupt-parent: Parent interrupt device, must be handle of palmas node.
- interrupts: Interrupt number of RTC submodule on device.
Optional properties:
diff --git a/Documentation/devicetree/bindings/rtc/spear-rtc.txt b/Documentation/devicetree/bindings/rtc/spear-rtc.txt
index ca67ac6..fecf8e4 100644
--- a/Documentation/devicetree/bindings/rtc/spear-rtc.txt
+++ b/Documentation/devicetree/bindings/rtc/spear-rtc.txt
@@ -3,8 +3,6 @@
Required properties:
- compatible : "st,spear600-rtc"
- reg : Address range of the rtc registers
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
- interrupt: Should contain the rtc interrupt number
Example:
diff --git a/Documentation/devicetree/bindings/rtc/sprd,sc27xx-rtc.txt b/Documentation/devicetree/bindings/rtc/sprd,sc27xx-rtc.txt
index 7c170da..1f575429 100644
--- a/Documentation/devicetree/bindings/rtc/sprd,sc27xx-rtc.txt
+++ b/Documentation/devicetree/bindings/rtc/sprd,sc27xx-rtc.txt
@@ -3,7 +3,6 @@
Required properties:
- compatible: should be "sprd,sc2731-rtc".
- reg: address offset of rtc register.
-- interrupt-parent: phandle for the interrupt controller.
- interrupts: rtc alarm interrupt.
Example:
diff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt
index c920e27..130ca5b 100644
--- a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt
+++ b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt
@@ -13,8 +13,6 @@
It is required on stm32(h7/mp1).
- clock-names: must be "rtc_ck" and "pclk".
It is required on stm32(h7/mp1).
-- interrupt-parent: phandle for the interrupt controller.
- It is required on stm32(f4/f7/h7).
- interrupts: rtc alarm interrupt. On stm32mp1, a second interrupt is required
for rtc alarm wakeup interrupt.
- st,syscfg: phandle/offset/mask triplet. The phandle to pwrcfg used to
diff --git a/Documentation/devicetree/bindings/rtc/stericsson,coh901331.txt b/Documentation/devicetree/bindings/rtc/stericsson,coh901331.txt
index 3ebeb31..e615a89 100644
--- a/Documentation/devicetree/bindings/rtc/stericsson,coh901331.txt
+++ b/Documentation/devicetree/bindings/rtc/stericsson,coh901331.txt
@@ -3,7 +3,6 @@
Required properties:
- compatible: must be "stericsson,coh901331"
- reg: address range of rtc register set.
-- interrupt-parent: phandle for the interrupt controller.
- interrupts: rtc alarm interrupt.
- clocks: phandle to the rtc clock source
diff --git a/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt b/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt
index 6a4e0d3..0dc121b 100644
--- a/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt
+++ b/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt
@@ -6,7 +6,6 @@
- reg: address on the bus
Optional ST33ZP24 Properties:
-- interrupt-parent: phandle for the interrupt gpio controller
- interrupts: GPIO interrupt to which the chip is connected
- lpcpd-gpios: Output GPIO pin used for ST33ZP24 power management D1/D2 state.
If set, power must be present when the platform is going into sleep/hibernate mode.
diff --git a/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt b/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt
index 604dce9..3719897 100644
--- a/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt
+++ b/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt
@@ -5,7 +5,6 @@
- spi-max-frequency: Maximum SPI frequency (<= 10000000).
Optional ST33ZP24 Properties:
-- interrupt-parent: phandle for the interrupt gpio controller
- interrupts: GPIO interrupt to which the chip is connected
- lpcpd-gpios: Output GPIO pin used for ST33ZP24 power management D1/D2 state.
If set, power must be present when the platform is going into sleep/hibernate mode.
diff --git a/Documentation/devicetree/bindings/security/tpm/tpm_tis_mmio.txt b/Documentation/devicetree/bindings/security/tpm/tpm_tis_mmio.txt
index 41d7405..7c63044 100644
--- a/Documentation/devicetree/bindings/security/tpm/tpm_tis_mmio.txt
+++ b/Documentation/devicetree/bindings/security/tpm/tpm_tis_mmio.txt
@@ -13,7 +13,7 @@
"tcg,tpm-tis-mmio". Valid chip strings are:
* "atmel,at97sc3204"
- reg: The location of the MMIO registers, should be at least 0x5000 bytes
-- interrupt-parent/interrupts: An optional interrupt indicating command completion.
+- interrupts: An optional interrupt indicating command completion.
Example:
diff --git a/Documentation/devicetree/bindings/serial/maxim,max310x.txt b/Documentation/devicetree/bindings/serial/maxim,max310x.txt
index 823f77d..79e10a0 100644
--- a/Documentation/devicetree/bindings/serial/maxim,max310x.txt
+++ b/Documentation/devicetree/bindings/serial/maxim,max310x.txt
@@ -7,8 +7,6 @@
- "maxim,max3109" for Maxim MAX3109,
- "maxim,max14830" for Maxim MAX14830.
- reg: SPI chip select number.
-- interrupt-parent: The phandle for the interrupt controller that
- services interrupts for this IC.
- interrupts: Specifies the interrupt source of the parent interrupt
controller. The format of the interrupt specifier depends on the
parent interrupt controller.
diff --git a/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
index fbfe536..e7921a8 100644
--- a/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
+++ b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
@@ -10,8 +10,6 @@
- "nxp,sc16is760" for NXP SC16IS760,
- "nxp,sc16is762" for NXP SC16IS762.
- reg: I2C address of the SC16IS7xx device.
-- interrupt-parent: The phandle for the interrupt controller that
- services interrupts for this IC.
- interrupts: Should contain the UART interrupt
- clocks: Reference to the IC source clock.
@@ -44,8 +42,6 @@
- "nxp,sc16is760" for NXP SC16IS760,
- "nxp,sc16is762" for NXP SC16IS762.
- reg: SPI chip select number.
-- interrupt-parent: The phandle for the interrupt controller that
- services interrupts for this IC.
- interrupts: Specifies the interrupt source of the parent interrupt
controller. The format of the interrupt specifier depends on the
parent interrupt controller.
diff --git a/Documentation/devicetree/bindings/serial/qca,ar9330-uart.txt b/Documentation/devicetree/bindings/serial/qca,ar9330-uart.txt
index c5e032c..7d65126 100644
--- a/Documentation/devicetree/bindings/serial/qca,ar9330-uart.txt
+++ b/Documentation/devicetree/bindings/serial/qca,ar9330-uart.txt
@@ -7,9 +7,6 @@
- reg: Specifies the physical base address of the controller and
the length of the memory mapped region.
-- interrupt-parent: The phandle for the interrupt controller that
- services interrupts for this device.
-
- interrupts: Specifies the interrupt source of the parent interrupt
controller. The format of the interrupt specifier depends on the
parent interrupt controller.
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/gpio.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/gpio.txt
index 626e1af..cce3cd7 100644
--- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/gpio.txt
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/gpio.txt
@@ -21,7 +21,6 @@
one as described by the fsl,cpm1-gpio-irq-mask property. There should be as
many interrupts as number of ones in the mask property. The first interrupt in
the list corresponds to the most significant bit of the mask.
-- interrupt-parent : Parent for the above interrupt property.
Example of four SOC GPIO banks defined as gpio-controller nodes:
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/ucc.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/ucc.txt
index e47734b..5efb7ac 100644
--- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/ucc.txt
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/ucc.txt
@@ -11,8 +11,6 @@
information for the interrupt. This should be encoded based on
the information in section 2) depending on the type of interrupt
controller you have.
-- interrupt-parent : the phandle for the interrupt controller that
- services interrupts for this device.
- pio-handle : The phandle for the Parallel I/O port configuration.
- port-number : for UART drivers, the port number to use, between 0 and 3.
This usually corresponds to the /dev/ttyQE device, e.g. <0> = /dev/ttyQE0.
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/usb.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/usb.txt
index 9ccd5f3..da13999 100644
--- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/usb.txt
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/usb.txt
@@ -6,7 +6,6 @@
length, the next two two cells should contain PRAM location and
length.
- interrupts : should contain USB interrupt.
-- interrupt-parent : interrupt source phandle.
- fsl,fullspeed-clock : specifies the full speed USB clock source:
"none": clock source is disabled
"brg1" through "brg16": clock source is BRG1-BRG16, respectively
diff --git a/Documentation/devicetree/bindings/sound/cs35l33.txt b/Documentation/devicetree/bindings/sound/cs35l33.txt
index acfb475..dc5a355 100644
--- a/Documentation/devicetree/bindings/sound/cs35l33.txt
+++ b/Documentation/devicetree/bindings/sound/cs35l33.txt
@@ -14,8 +14,6 @@
- reset-gpios : gpio used to reset the amplifier
- - interrupt-parent : Specifies the phandle of the interrupt controller to
- which the IRQs from CS35L33 are delivered to.
- interrupts : IRQ line info CS35L33.
(See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
for further information relating to interrupt properties)
diff --git a/Documentation/devicetree/bindings/sound/cs35l34.txt b/Documentation/devicetree/bindings/sound/cs35l34.txt
index b218ead..2f7606b 100644
--- a/Documentation/devicetree/bindings/sound/cs35l34.txt
+++ b/Documentation/devicetree/bindings/sound/cs35l34.txt
@@ -21,8 +21,6 @@
- reset-gpios: GPIO used to reset the amplifier.
- - interrupt-parent : Specifies the phandle of the interrupt controller to
- which the IRQs from CS35L34 are delivered to.
- interrupts : IRQ line info CS35L34.
(See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
for further information relating to interrupt properties)
diff --git a/Documentation/devicetree/bindings/sound/cs35l35.txt b/Documentation/devicetree/bindings/sound/cs35l35.txt
index 77ee75c..7915897 100644
--- a/Documentation/devicetree/bindings/sound/cs35l35.txt
+++ b/Documentation/devicetree/bindings/sound/cs35l35.txt
@@ -10,8 +10,6 @@
as covered in
Documentation/devicetree/bindings/regulator/regulator.txt.
- - interrupt-parent : Specifies the phandle of the interrupt controller to
- which the IRQs from CS35L35 are delivered to.
- interrupts : IRQ line info CS35L35.
(See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
for further information relating to interrupt properties)
diff --git a/Documentation/devicetree/bindings/sound/cs42l42.txt b/Documentation/devicetree/bindings/sound/cs42l42.txt
index 9a2c5e2..7dfaa2a 100644
--- a/Documentation/devicetree/bindings/sound/cs42l42.txt
+++ b/Documentation/devicetree/bindings/sound/cs42l42.txt
@@ -15,9 +15,6 @@
- reset-gpios : a GPIO spec for the reset pin. If specified, it will be
deasserted before communication to the codec starts.
- - interrupt-parent : Specifies the phandle of the interrupt controller to
- which the IRQs from CS42L42 are delivered to.
-
- interrupts : IRQ line info CS42L42.
(See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
for further information relating to interrupt properties)
@@ -107,4 +104,4 @@
cirrus,btn-det-event-dbnce = <10>;
cirrus,bias-lvls = <0x0F 0x08 0x04 0x01>;
cirrus,hs-bias-ramp-rate = <0x02>;
-};
\ No newline at end of file
+};
diff --git a/Documentation/devicetree/bindings/sound/da7218.txt b/Documentation/devicetree/bindings/sound/da7218.txt
index 3ab9dfe..2cf3089 100644
--- a/Documentation/devicetree/bindings/sound/da7218.txt
+++ b/Documentation/devicetree/bindings/sound/da7218.txt
@@ -15,8 +15,6 @@
information relating to regulators)
Optional properties:
-- interrupt-parent: Specifies the phandle of the interrupt controller to which
- the IRQs from DA7218 are delivered to.
- interrupts: IRQ line info for DA7218 chip.
(See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
further information relating to interrupt properties)
diff --git a/Documentation/devicetree/bindings/sound/da7219.txt b/Documentation/devicetree/bindings/sound/da7219.txt
index c3df92d..e9d0bae 100644
--- a/Documentation/devicetree/bindings/sound/da7219.txt
+++ b/Documentation/devicetree/bindings/sound/da7219.txt
@@ -8,8 +8,6 @@
- compatible : Should be "dlg,da7219"
- reg: Specifies the I2C slave address
-- interrupt-parent : Specifies the phandle of the interrupt controller to which
- the IRQs from DA7219 are delivered to.
- interrupts : IRQ line info for DA7219.
(See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
further information relating to interrupt properties)
diff --git a/Documentation/devicetree/bindings/sound/fsl,ssi.txt b/Documentation/devicetree/bindings/sound/fsl,ssi.txt
index d415888..7e15a85 100644
--- a/Documentation/devicetree/bindings/sound/fsl,ssi.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,ssi.txt
@@ -18,8 +18,6 @@
encoded based on the information in section 2)
depending on the type of interrupt controller you
have.
-- interrupt-parent: The phandle for the interrupt controller that
- services interrupts for this device.
- fsl,fifo-depth: The number of elements in the transmit and receive FIFOs.
This number is the maximum allowed value for SFCSR[TFWM0].
- clocks: "ipg" - Required clock for the SSI unit
diff --git a/Documentation/devicetree/bindings/sound/omap-dmic.txt b/Documentation/devicetree/bindings/sound/omap-dmic.txt
index fd8105f..418e30e 100644
--- a/Documentation/devicetree/bindings/sound/omap-dmic.txt
+++ b/Documentation/devicetree/bindings/sound/omap-dmic.txt
@@ -6,7 +6,6 @@
<MPU access base address, size>,
<L3 interconnect address, size>;
- interrupts: Interrupt number for DMIC
-- interrupt-parent: The parent interrupt controller
- ti,hwmods: Name of the hwmod associated with OMAP dmic IP
Example:
diff --git a/Documentation/devicetree/bindings/sound/omap-mcbsp.txt b/Documentation/devicetree/bindings/sound/omap-mcbsp.txt
index 17cce44..ae8bf70 100644
--- a/Documentation/devicetree/bindings/sound/omap-mcbsp.txt
+++ b/Documentation/devicetree/bindings/sound/omap-mcbsp.txt
@@ -15,7 +15,6 @@
<TX irq>,
<RX irq>;
- interrupt-names: Array of strings associated with the interrupt numbers
-- interrupt-parent: The parent interrupt controller
- ti,buffer-size: Size of the FIFO on the port (OMAP2430 and newer SoC)
- ti,hwmods: Name of the hwmod associated to the McBSP port
diff --git a/Documentation/devicetree/bindings/sound/omap-mcpdm.txt b/Documentation/devicetree/bindings/sound/omap-mcpdm.txt
index 0741dff..5f4e68c 100644
--- a/Documentation/devicetree/bindings/sound/omap-mcpdm.txt
+++ b/Documentation/devicetree/bindings/sound/omap-mcpdm.txt
@@ -6,7 +6,6 @@
<MPU access base address, size>,
<L3 interconnect address, size>;
- interrupts: Interrupt number for McPDM
-- interrupt-parent: The parent interrupt controller
- ti,hwmods: Name of the hwmod associated to the McPDM
Example:
diff --git a/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt b/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt
index 551ecab..fdcea3d 100644
--- a/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt
@@ -7,7 +7,6 @@
Required properties
- compatible = "qcom,pm8916-wcd-analog-codec";
- reg: represents the slave base address provided to the peripheral.
- - interrupt-parent : The parent interrupt controller.
- interrupts: List of interrupts in given SPMI peripheral.
- interrupt-names: Names specified to above list of interrupts in same
order. List of supported interrupt names are:
diff --git a/Documentation/devicetree/bindings/sound/rt5514.txt b/Documentation/devicetree/bindings/sound/rt5514.txt
index b25ed08..d2cc171 100644
--- a/Documentation/devicetree/bindings/sound/rt5514.txt
+++ b/Documentation/devicetree/bindings/sound/rt5514.txt
@@ -14,7 +14,6 @@
- clocks: The phandle of the master clock to the CODEC
- clock-names: Should be "mclk"
-- interrupt-parent: The phandle for the interrupt controller.
- interrupts: The interrupt number to the cpu. The interrupt specifier format
depends on the interrupt controller.
diff --git a/Documentation/devicetree/bindings/sound/ts3a227e.txt b/Documentation/devicetree/bindings/sound/ts3a227e.txt
index a836881..3ed8359 100644
--- a/Documentation/devicetree/bindings/sound/ts3a227e.txt
+++ b/Documentation/devicetree/bindings/sound/ts3a227e.txt
@@ -10,7 +10,6 @@
- compatible: Should contain "ti,ts3a227e".
- reg: The i2c address. Should contain <0x3b>.
- - interrupt-parent: The parent interrupt controller
- interrupts: Interrupt number for /INT pin from the 227e
Optional properies:
diff --git a/Documentation/devicetree/bindings/sound/ux500-msp.txt b/Documentation/devicetree/bindings/sound/ux500-msp.txt
index 99acd9c..7dd1b961 100644
--- a/Documentation/devicetree/bindings/sound/ux500-msp.txt
+++ b/Documentation/devicetree/bindings/sound/ux500-msp.txt
@@ -6,7 +6,6 @@
Optional properties:
- interrupts : The interrupt output from the device.
- - interrupt-parent : The parent interrupt controller.
- <name>-supply : Phandle to the regulator <name> supply
Example:
diff --git a/Documentation/devicetree/bindings/sound/wm8994.txt b/Documentation/devicetree/bindings/sound/wm8994.txt
index 4a9dead..68cccc4 100644
--- a/Documentation/devicetree/bindings/sound/wm8994.txt
+++ b/Documentation/devicetree/bindings/sound/wm8994.txt
@@ -26,7 +26,6 @@
- interrupt-controller : These devices contain interrupt controllers
and may provide interrupt services to other devices if they have an
interrupt line connected.
- - interrupt-parent : The parent interrupt controller.
- #interrupt-cells: the number of cells to describe an IRQ, this should be 2.
The first cell is the IRQ number.
The second cell is the flags, encoded as the trigger masks from
@@ -57,6 +56,12 @@
- wlf,ldoena-always-driven : If present LDOENA is always driven.
+ - wlf,spkmode-pu : If present enable the internal pull-up resistor on
+ the SPKMODE pin.
+
+ - wlf,csnaddr-pd : If present enable the internal pull-down resistor on
+ the CS/ADDR pin.
+
Example:
wm8994: codec@1a {
diff --git a/Documentation/devicetree/bindings/spi/fsl-spi.txt b/Documentation/devicetree/bindings/spi/fsl-spi.txt
index a233137..8854004 100644
--- a/Documentation/devicetree/bindings/spi/fsl-spi.txt
+++ b/Documentation/devicetree/bindings/spi/fsl-spi.txt
@@ -12,8 +12,6 @@
information for the interrupt. This should be encoded based on
the information in section 2) depending on the type of interrupt
controller you have.
-- interrupt-parent : the phandle for the interrupt controller that
- services interrupts for this device.
- clock-frequency : input clock frequency to non FSL_SOC cores
Optional properties:
diff --git a/Documentation/devicetree/bindings/spi/sh-hspi.txt b/Documentation/devicetree/bindings/spi/sh-hspi.txt
index 585fed9..b9d1e4d 100644
--- a/Documentation/devicetree/bindings/spi/sh-hspi.txt
+++ b/Documentation/devicetree/bindings/spi/sh-hspi.txt
@@ -6,8 +6,6 @@
- "renesas,hspi-r8a7778" (R-Car M1)
- "renesas,hspi-r8a7779" (R-Car H1)
- reg : Offset and length of the register set for the device
-- interrupt-parent : The phandle for the interrupt controller that
- services interrupts for this device
- interrupts : Interrupt specifier
- #address-cells : Must be <1>
- #size-cells : Must be <0>
diff --git a/Documentation/devicetree/bindings/spi/sh-msiof.txt b/Documentation/devicetree/bindings/spi/sh-msiof.txt
index 3980632..bfbc203 100644
--- a/Documentation/devicetree/bindings/spi/sh-msiof.txt
+++ b/Documentation/devicetree/bindings/spi/sh-msiof.txt
@@ -29,8 +29,6 @@
If two register sets are present, the first is to be
used by the CPU, and the second is to be used by the
DMA engine.
-- interrupt-parent : The phandle for the interrupt controller that
- services interrupts for this device
- interrupts : Interrupt specifier
- #address-cells : Must be <1>
- #size-cells : Must be <0>
diff --git a/Documentation/devicetree/bindings/spi/spi-cadence.txt b/Documentation/devicetree/bindings/spi/spi-cadence.txt
index 94f0914..05a2ef9 100644
--- a/Documentation/devicetree/bindings/spi/spi-cadence.txt
+++ b/Documentation/devicetree/bindings/spi/spi-cadence.txt
@@ -6,7 +6,6 @@
- reg : Physical base address and size of SPI registers map.
- interrupts : Property with a value describing the interrupt
number.
-- interrupt-parent : Must be core interrupt controller
- clock-names : List of input clock names - "ref_clk", "pclk"
(See clock bindings for details).
- clocks : Clock phandles (see clock bindings for details).
diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt
index 225ace1..4af1326 100644
--- a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt
+++ b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt
@@ -4,7 +4,6 @@
- compatible :
- "fsl,imx7ulp-spi" for LPSPI compatible with the one integrated on i.MX7ULP soc
- reg : address and length of the lpspi master registers
-- interrupt-parent : core interrupt controller
- interrupts : lpspi interrupt
- clocks : lpspi clock specifier
diff --git a/Documentation/devicetree/bindings/spi/spi-rspi.txt b/Documentation/devicetree/bindings/spi/spi-rspi.txt
index 3b02b3a..96fd585 100644
--- a/Documentation/devicetree/bindings/spi/spi-rspi.txt
+++ b/Documentation/devicetree/bindings/spi/spi-rspi.txt
@@ -28,8 +28,6 @@
- "rx" for SPRI,
- "tx" to SPTI,
- "mux" for a single muxed interrupt.
-- interrupt-parent : The phandle for the interrupt controller that
- services interrupts for this device.
- num-cs : Number of chip selects. Some RSPI cores have more than 1.
- #address-cells : Must be <1>
- #size-cells : Must be <0>
diff --git a/Documentation/devicetree/bindings/spi/spi-xilinx.txt b/Documentation/devicetree/bindings/spi/spi-xilinx.txt
index 7bf61ef..dc924a5 100644
--- a/Documentation/devicetree/bindings/spi/spi-xilinx.txt
+++ b/Documentation/devicetree/bindings/spi/spi-xilinx.txt
@@ -6,7 +6,6 @@
- reg : Physical base address and size of SPI registers map.
- interrupts : Property with a value describing the interrupt
number.
-- interrupt-parent : Must be core interrupt controller
Optional properties:
- xlnx,num-ss-bits : Number of chip selects used.
diff --git a/Documentation/devicetree/bindings/spi/spi-xlp.txt b/Documentation/devicetree/bindings/spi/spi-xlp.txt
index 40e82d5..f4925ec 100644
--- a/Documentation/devicetree/bindings/spi/spi-xlp.txt
+++ b/Documentation/devicetree/bindings/spi/spi-xlp.txt
@@ -13,7 +13,6 @@
- reg : Should contain register location and length.
- clocks : Phandle of the spi clock
- interrupts : Interrupt number used by this controller.
-- interrupt-parent : Phandle of the parent interrupt controller.
SPI slave nodes must be children of the SPI master node and can contain
properties described in Documentation/devicetree/bindings/spi/spi-bus.txt.
diff --git a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt
index c8f50e5..0f6d37f 100644
--- a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt
+++ b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt
@@ -6,7 +6,6 @@
- reg : Physical base address and size of GQSPI registers map.
- interrupts : Property with a value describing the interrupt
number.
-- interrupt-parent : Must be core interrupt controller.
- clock-names : List of input clock names - "ref_clk", "pclk"
(See clock bindings for details).
- clocks : Clock phandles (see clock bindings for details).
diff --git a/Documentation/devicetree/bindings/sram/sram.txt b/Documentation/devicetree/bindings/sram/sram.txt
index 267da44..e98908b 100644
--- a/Documentation/devicetree/bindings/sram/sram.txt
+++ b/Documentation/devicetree/bindings/sram/sram.txt
@@ -50,6 +50,8 @@
manipulation of the page attributes.
- label : the name for the reserved partition, if omitted, the label
is taken from the node name excluding the unit address.
+- clocks : a list of phandle and clock specifier pair that controls the
+ single SRAM clock.
Example:
diff --git a/Documentation/devicetree/bindings/staging/iio/adc/spear-adc.txt b/Documentation/devicetree/bindings/staging/iio/adc/spear-adc.txt
index 02ea23a..88bc94f 100644
--- a/Documentation/devicetree/bindings/staging/iio/adc/spear-adc.txt
+++ b/Documentation/devicetree/bindings/staging/iio/adc/spear-adc.txt
@@ -3,8 +3,6 @@
Required properties:
- compatible: Should be "st,spear600-adc"
- reg: Address and length of the register set for the device
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
- interrupts: Should contain the ADC interrupt
- sampling-frequency: Default sampling frequency
diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
index 9d43553..43a9ed5 100644
--- a/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
+++ b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
@@ -7,7 +7,6 @@
- reg: address range for the AVS TMON registers
- interrupts: temperature monitor interrupt, for high/low threshold triggers
- interrupt-names: should be "tmon"
-- interrupt-parent: the parent interrupt controller
Example:
diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
index ad648d9..33004ce 100644
--- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
@@ -13,7 +13,6 @@
Exynos5420 (Must pass triminfo base and triminfo clock)
"samsung,exynos5433-tmu"
"samsung,exynos7-tmu"
-- interrupt-parent : The phandle for the interrupt controller
- reg : Address range of the thermal registers. For soc's which has multiple
instances of TMU and some registers are shared across all TMU's like
interrupt related then 2 set of register has to supplied. First set
diff --git a/Documentation/devicetree/bindings/timer/altr,timer-1.0.txt b/Documentation/devicetree/bindings/timer/altr,timer-1.0.txt
index 904a584..e698e34 100644
--- a/Documentation/devicetree/bindings/timer/altr,timer-1.0.txt
+++ b/Documentation/devicetree/bindings/timer/altr,timer-1.0.txt
@@ -4,7 +4,6 @@
- compatible : should be "altr,timer-1.0"
- reg : Specifies base physical address and size of the registers.
-- interrupt-parent: phandle of the interrupt controller
- interrupts : Should contain the timer interrupt number
- clock-frequency : The frequency of the clock that drives the counter, in Hz.
diff --git a/Documentation/devicetree/bindings/timer/fsl,gtm.txt b/Documentation/devicetree/bindings/timer/fsl,gtm.txt
index 9a33efd..fc1c571 100644
--- a/Documentation/devicetree/bindings/timer/fsl,gtm.txt
+++ b/Documentation/devicetree/bindings/timer/fsl,gtm.txt
@@ -7,7 +7,6 @@
"fsl,<chip>-cpm2-gtm", "fsl,cpm2-gtm", "fsl,gtm" for CPM2 GTMs
- reg : should contain gtm registers location and length (0x40).
- interrupts : should contain four interrupts.
- - interrupt-parent : interrupt source phandle.
- clock-frequency : specifies the frequency driving the timer.
Example:
diff --git a/Documentation/devicetree/bindings/timer/marvell,orion-timer.txt b/Documentation/devicetree/bindings/timer/marvell,orion-timer.txt
index 62bb826..cd1a0c2 100644
--- a/Documentation/devicetree/bindings/timer/marvell,orion-timer.txt
+++ b/Documentation/devicetree/bindings/timer/marvell,orion-timer.txt
@@ -3,7 +3,6 @@
Required properties:
- compatible: shall be "marvell,orion-timer"
- reg: base address of the timer register starting with TIMERS CONTROL register
-- interrupt-parent: phandle of the bridge interrupt controller
- interrupts: should contain the interrupts for Timer0 and Timer1
- clocks: phandle of timer reference clock (tclk)
diff --git a/Documentation/devicetree/bindings/timer/snps,arc-timer.txt b/Documentation/devicetree/bindings/timer/snps,arc-timer.txt
index 4ef0246..147ef3e7 100644
--- a/Documentation/devicetree/bindings/timer/snps,arc-timer.txt
+++ b/Documentation/devicetree/bindings/timer/snps,arc-timer.txt
@@ -12,10 +12,6 @@
(16 for ARCHS cores, 3 for ARC700 cores)
- clocks : phandle to the source clock
-Optional properties:
-
-- interrupt-parent : phandle to parent intc
-
Example:
timer0 {
diff --git a/Documentation/devicetree/bindings/timer/st,spear-timer.txt b/Documentation/devicetree/bindings/timer/st,spear-timer.txt
index c001722..b5238a0 100644
--- a/Documentation/devicetree/bindings/timer/st,spear-timer.txt
+++ b/Documentation/devicetree/bindings/timer/st,spear-timer.txt
@@ -5,8 +5,6 @@
- compatible : Should be:
"st,spear-timer"
- reg: Address range of the timer registers
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
- interrupt: Should contain the timer interrupt number
Example:
diff --git a/Documentation/devicetree/bindings/timer/ti,c64x+timer64.txt b/Documentation/devicetree/bindings/timer/ti,c64x+timer64.txt
index 95911fe..d96c1e2 100644
--- a/Documentation/devicetree/bindings/timer/ti,c64x+timer64.txt
+++ b/Documentation/devicetree/bindings/timer/ti,c64x+timer64.txt
@@ -7,7 +7,6 @@
- compatible: must be "ti,c64x+timer64"
- reg: base address and size of register region
-- interrupt-parent: interrupt controller
- interrupts: interrupt id
Optional properties:
diff --git a/Documentation/devicetree/bindings/usb/fsl-usb.txt b/Documentation/devicetree/bindings/usb/fsl-usb.txt
index 4779c02..0b08b00 100644
--- a/Documentation/devicetree/bindings/usb/fsl-usb.txt
+++ b/Documentation/devicetree/bindings/usb/fsl-usb.txt
@@ -33,8 +33,6 @@
information for the interrupt. This should be encoded based on
the information in section 2) depending on the type of interrupt
controller you have.
- - interrupt-parent : the phandle for the interrupt controller that
- services interrupts for this device.
Optional properties :
- fsl,invert-drvvbus : boolean; for MPC5121 USB0 only. Indicates the
diff --git a/Documentation/devicetree/bindings/usb/maxim,max3421.txt b/Documentation/devicetree/bindings/usb/maxim,max3421.txt
index 8cdbe0c..90495b1 100644
--- a/Documentation/devicetree/bindings/usb/maxim,max3421.txt
+++ b/Documentation/devicetree/bindings/usb/maxim,max3421.txt
@@ -11,9 +11,6 @@
The driver configures MAX3421E for active low level triggered interrupts,
configure your interrupt line accordingly.
-Optional property:
- - interrupt-parent: the phandle to the associated interrupt controller.
-
Example:
usb@0 {
diff --git a/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt b/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt
index 09e847e..d4cf53c 100644
--- a/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt
+++ b/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt
@@ -3,8 +3,6 @@
Required properties:
- compatible : Must be "richtek,rt1711h".
- reg : Must be 0x4e, it's slave address of RT1711H.
- - interrupt-parent : the phandle for the interrupt controller that
- provides interrupts for this device.
- interrupts : <a b> where a is the interrupt number and b represents an
encoding of the sense and level information for the interrupt.
diff --git a/Documentation/devicetree/bindings/usb/samsung-hsotg.txt b/Documentation/devicetree/bindings/usb/samsung-hsotg.txt
index b83d428..0388634 100644
--- a/Documentation/devicetree/bindings/usb/samsung-hsotg.txt
+++ b/Documentation/devicetree/bindings/usb/samsung-hsotg.txt
@@ -14,8 +14,6 @@
Required properties:
- compatible: "samsung,s3c6400-hsotg" should be used for all currently
supported SoC,
-- interrupt-parent: phandle for the interrupt controller to which the
- interrupt signal of the HSOTG block is routed,
- interrupts: specifier of interrupt signal of interrupt controller,
according to bindings of interrupt controller,
- clocks: contains an array of clock specifiers:
diff --git a/Documentation/devicetree/bindings/usb/spear-usb.txt b/Documentation/devicetree/bindings/usb/spear-usb.txt
index f8a464a..1dc91cc 100644
--- a/Documentation/devicetree/bindings/usb/spear-usb.txt
+++ b/Documentation/devicetree/bindings/usb/spear-usb.txt
@@ -6,8 +6,6 @@
Required properties:
- compatible: "st,spear600-ehci"
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
- interrupts: Should contain the EHCI interrupt
Example:
@@ -25,8 +23,6 @@
Required properties:
- compatible: "st,spear600-ohci"
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
- interrupts: Should contain the OHCI interrupt
Example:
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 7cad066..c401d10 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -41,6 +41,7 @@
artesyn Artesyn Embedded Technologies Inc.
asahi-kasei Asahi Kasei Corp.
aspeed ASPEED Technology Inc.
+asus AsusTek Computer Inc.
atlas Atlas Scientific LLC
atmel Atmel Corporation
auo AU Optronics Corporation
@@ -53,6 +54,7 @@
axis Axis Communications AB
bananapi BIPAI KEJI LIMITED
bhf Beckhoff Automation GmbH & Co. KG
+bitmain Bitmain Technologies
boe BOE Technology Group Co., Ltd.
bosch Bosch Sensortec GmbH
boundary Boundary Devices Inc.
@@ -412,6 +414,7 @@
xillybus Xillybus Ltd.
xlnx Xilinx
xunlong Shenzhen Xunlong Software CO.,Limited
+ysoft Y Soft Corporation a.s.
zarlink Zarlink Semiconductor
zeitec ZEITEC Semiconductor Co., LTD.
zidoo Shenzhen Zidoo Technology Co., Ltd.
diff --git a/Documentation/devicetree/bindings/watchdog/cadence-wdt.txt b/Documentation/devicetree/bindings/watchdog/cadence-wdt.txt
index c3a36ee..750a876 100644
--- a/Documentation/devicetree/bindings/watchdog/cadence-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/cadence-wdt.txt
@@ -5,7 +5,6 @@
- compatible : Should be "cdns,wdt-r1p2".
- clocks : This is pclk (APB clock).
- interrupts : This is wd_irq - watchdog timeout interrupt.
-- interrupt-parent : Must be core interrupt controller.
Optional properties
- reset-on-timeout : If this property exists, then a reset is done
diff --git a/Documentation/devicetree/bindings/watchdog/rt2880-wdt.txt b/Documentation/devicetree/bindings/watchdog/rt2880-wdt.txt
index d7bab3d..05b95bf 100644
--- a/Documentation/devicetree/bindings/watchdog/rt2880-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/rt2880-wdt.txt
@@ -5,7 +5,6 @@
- reg: physical base address of the controller and length of the register range
Optional properties:
-- interrupt-parent: phandle to the INTC device node
- interrupts: Specify the INTC interrupt number
Example:
diff --git a/Documentation/devicetree/bindings/xilinx.txt b/Documentation/devicetree/bindings/xilinx.txt
index 1d11b90..d058ace 100644
--- a/Documentation/devicetree/bindings/xilinx.txt
+++ b/Documentation/devicetree/bindings/xilinx.txt
@@ -49,7 +49,7 @@
followed by an older IP core version which implements the same
interface or any other device with the same interface.
- 'reg', 'interrupt-parent' and 'interrupts' are all optional properties.
+ 'reg' and 'interrupts' are all optional properties.
For example, the following block from system.mhs:
diff --git a/Documentation/devicetree/bindings/xillybus/xillybus.txt b/Documentation/devicetree/bindings/xillybus/xillybus.txt
index 9e316dc..e65d1f9 100644
--- a/Documentation/devicetree/bindings/xillybus/xillybus.txt
+++ b/Documentation/devicetree/bindings/xillybus/xillybus.txt
@@ -4,8 +4,6 @@
- compatible: Should be "xillybus,xillybus-1.00.a"
- reg: Address and length of the register set for the device
- interrupts: Contains one interrupt node, typically consisting of three cells.
-- interrupt-parent: the phandle for the interrupt controller that
- services interrupts for this device.
Optional properties:
- dma-coherent: Present if DMA operations are coherent
diff --git a/Documentation/devicetree/dynamic-resolution-notes.txt b/Documentation/devicetree/dynamic-resolution-notes.txt
index 083d232..c24ec36 100644
--- a/Documentation/devicetree/dynamic-resolution-notes.txt
+++ b/Documentation/devicetree/dynamic-resolution-notes.txt
@@ -2,15 +2,14 @@
----------------------------------
This document describes the implementation of the in-kernel
-Device Tree resolver, residing in drivers/of/resolver.c and is a
-companion document to Documentation/devicetree/dt-object-internal.txt[1]
+Device Tree resolver, residing in drivers/of/resolver.c
How the resolver works
----------------------
The resolver is given as an input an arbitrary tree compiled with the
proper dtc option and having a /plugin/ tag. This generates the
-appropriate __fixups__ & __local_fixups__ nodes as described in [1].
+appropriate __fixups__ & __local_fixups__ nodes.
In sequence the resolver works by the following steps:
diff --git a/drivers/of/address.c b/drivers/of/address.c
index 5334991..7ddbf0a 100644
--- a/drivers/of/address.c
+++ b/drivers/of/address.c
@@ -846,7 +846,7 @@
* for a given device_node
* @device: the device whose io range will be mapped
* @index: index of the io range
- * @name: name of the resource
+ * @name: name "override" for the memory region request or NULL
*
* Returns a pointer to the requested and mapped memory or an ERR_PTR() encoded
* error code on failure. Usage example:
@@ -856,7 +856,7 @@
* return PTR_ERR(base);
*/
void __iomem *of_io_request_and_map(struct device_node *np, int index,
- const char *name)
+ const char *name)
{
struct resource res;
void __iomem *mem;
@@ -864,6 +864,8 @@
if (of_address_to_resource(np, index, &res))
return IOMEM_ERR_PTR(-EINVAL);
+ if (!name)
+ name = res.name;
if (!request_mem_region(res.start, resource_size(&res), name))
return IOMEM_ERR_PTR(-EBUSY);
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index 6da20b9..800ad25 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -1034,14 +1034,7 @@
bool hotpluggable;
/* We are scanning "memory" nodes only */
- if (type == NULL) {
- /*
- * The longtrail doesn't have a device_type on the
- * /memory node, so look for the node called /memory@0.
- */
- if (!IS_ENABLED(CONFIG_PPC32) || depth != 1 || strcmp(uname, "memory@0") != 0)
- return 0;
- } else if (strcmp(type, "memory") != 0)
+ if (type == NULL || strcmp(type, "memory") != 0)
return 0;
reg = of_get_flat_dt_prop(node, "linux,usable-memory", &l);