| /* |
| * wm8523.c -- WM8523 ALSA SoC Audio driver |
| * |
| * Copyright 2009 Wolfson Microelectronics plc |
| * |
| * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> |
| * |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/pm.h> |
| #include <linux/i2c.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/slab.h> |
| #include <sound/core.h> |
| #include <sound/pcm.h> |
| #include <sound/pcm_params.h> |
| #include <sound/soc.h> |
| #include <sound/initval.h> |
| #include <sound/tlv.h> |
| |
| #include "wm8523.h" |
| |
| #define WM8523_NUM_SUPPLIES 2 |
| static const char *wm8523_supply_names[WM8523_NUM_SUPPLIES] = { |
| "AVDD", |
| "LINEVDD", |
| }; |
| |
| #define WM8523_NUM_RATES 7 |
| |
| /* codec private data */ |
| struct wm8523_priv { |
| enum snd_soc_control_type control_type; |
| struct regulator_bulk_data supplies[WM8523_NUM_SUPPLIES]; |
| unsigned int sysclk; |
| unsigned int rate_constraint_list[WM8523_NUM_RATES]; |
| struct snd_pcm_hw_constraint_list rate_constraint; |
| }; |
| |
| static const u16 wm8523_reg[WM8523_REGISTER_COUNT] = { |
| 0x8523, /* R0 - DEVICE_ID */ |
| 0x0001, /* R1 - REVISION */ |
| 0x0000, /* R2 - PSCTRL1 */ |
| 0x1812, /* R3 - AIF_CTRL1 */ |
| 0x0000, /* R4 - AIF_CTRL2 */ |
| 0x0001, /* R5 - DAC_CTRL3 */ |
| 0x0190, /* R6 - DAC_GAINL */ |
| 0x0190, /* R7 - DAC_GAINR */ |
| 0x0000, /* R8 - ZERO_DETECT */ |
| }; |
| |
| static int wm8523_volatile_register(unsigned int reg) |
| { |
| switch (reg) { |
| case WM8523_DEVICE_ID: |
| case WM8523_REVISION: |
| return 1; |
| default: |
| return 0; |
| } |
| } |
| |
| static int wm8523_reset(struct snd_soc_codec *codec) |
| { |
| return snd_soc_write(codec, WM8523_DEVICE_ID, 0); |
| } |
| |
| static const DECLARE_TLV_DB_SCALE(dac_tlv, -10000, 25, 0); |
| |
| static const char *wm8523_zd_count_text[] = { |
| "1024", |
| "2048", |
| }; |
| |
| static const struct soc_enum wm8523_zc_count = |
| SOC_ENUM_SINGLE(WM8523_ZERO_DETECT, 0, 2, wm8523_zd_count_text); |
| |
| static const struct snd_kcontrol_new wm8523_snd_controls[] = { |
| SOC_DOUBLE_R_TLV("Playback Volume", WM8523_DAC_GAINL, WM8523_DAC_GAINR, |
| 0, 448, 0, dac_tlv), |
| SOC_SINGLE("ZC Switch", WM8523_DAC_CTRL3, 4, 1, 0), |
| SOC_SINGLE("Playback Deemphasis Switch", WM8523_AIF_CTRL1, 8, 1, 0), |
| SOC_DOUBLE("Playback Switch", WM8523_DAC_CTRL3, 2, 3, 1, 1), |
| SOC_SINGLE("Volume Ramp Up Switch", WM8523_DAC_CTRL3, 1, 1, 0), |
| SOC_SINGLE("Volume Ramp Down Switch", WM8523_DAC_CTRL3, 0, 1, 0), |
| SOC_ENUM("Zero Detect Count", wm8523_zc_count), |
| }; |
| |
| static const struct snd_soc_dapm_widget wm8523_dapm_widgets[] = { |
| SND_SOC_DAPM_DAC("DAC", "Playback", SND_SOC_NOPM, 0, 0), |
| SND_SOC_DAPM_OUTPUT("LINEVOUTL"), |
| SND_SOC_DAPM_OUTPUT("LINEVOUTR"), |
| }; |
| |
| static const struct snd_soc_dapm_route intercon[] = { |
| { "LINEVOUTL", NULL, "DAC" }, |
| { "LINEVOUTR", NULL, "DAC" }, |
| }; |
| |
| static int wm8523_add_widgets(struct snd_soc_codec *codec) |
| { |
| struct snd_soc_dapm_context *dapm = &codec->dapm; |
| |
| snd_soc_dapm_new_controls(dapm, wm8523_dapm_widgets, |
| ARRAY_SIZE(wm8523_dapm_widgets)); |
| snd_soc_dapm_add_routes(dapm, intercon, ARRAY_SIZE(intercon)); |
| |
| return 0; |
| } |
| |
| static struct { |
| int value; |
| int ratio; |
| } lrclk_ratios[WM8523_NUM_RATES] = { |
| { 1, 128 }, |
| { 2, 192 }, |
| { 3, 256 }, |
| { 4, 384 }, |
| { 5, 512 }, |
| { 6, 768 }, |
| { 7, 1152 }, |
| }; |
| |
| static int wm8523_startup(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *dai) |
| { |
| struct snd_soc_codec *codec = dai->codec; |
| struct wm8523_priv *wm8523 = snd_soc_codec_get_drvdata(codec); |
| |
| /* The set of sample rates that can be supported depends on the |
| * MCLK supplied to the CODEC - enforce this. |
| */ |
| if (!wm8523->sysclk) { |
| dev_err(codec->dev, |
| "No MCLK configured, call set_sysclk() on init\n"); |
| return -EINVAL; |
| } |
| |
| snd_pcm_hw_constraint_list(substream->runtime, 0, |
| SNDRV_PCM_HW_PARAM_RATE, |
| &wm8523->rate_constraint); |
| |
| return 0; |
| } |
| |
| static int wm8523_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params, |
| struct snd_soc_dai *dai) |
| { |
| struct snd_soc_pcm_runtime *rtd = substream->private_data; |
| struct snd_soc_codec *codec = rtd->codec; |
| struct wm8523_priv *wm8523 = snd_soc_codec_get_drvdata(codec); |
| int i; |
| u16 aifctrl1 = snd_soc_read(codec, WM8523_AIF_CTRL1); |
| u16 aifctrl2 = snd_soc_read(codec, WM8523_AIF_CTRL2); |
| |
| /* Find a supported LRCLK ratio */ |
| for (i = 0; i < ARRAY_SIZE(lrclk_ratios); i++) { |
| if (wm8523->sysclk / params_rate(params) == |
| lrclk_ratios[i].ratio) |
| break; |
| } |
| |
| /* Should never happen, should be handled by constraints */ |
| if (i == ARRAY_SIZE(lrclk_ratios)) { |
| dev_err(codec->dev, "MCLK/fs ratio %d unsupported\n", |
| wm8523->sysclk / params_rate(params)); |
| return -EINVAL; |
| } |
| |
| aifctrl2 &= ~WM8523_SR_MASK; |
| aifctrl2 |= lrclk_ratios[i].value; |
| |
| aifctrl1 &= ~WM8523_WL_MASK; |
| switch (params_format(params)) { |
| case SNDRV_PCM_FORMAT_S16_LE: |
| break; |
| case SNDRV_PCM_FORMAT_S20_3LE: |
| aifctrl1 |= 0x8; |
| break; |
| case SNDRV_PCM_FORMAT_S24_LE: |
| aifctrl1 |= 0x10; |
| break; |
| case SNDRV_PCM_FORMAT_S32_LE: |
| aifctrl1 |= 0x18; |
| break; |
| } |
| |
| snd_soc_write(codec, WM8523_AIF_CTRL1, aifctrl1); |
| snd_soc_write(codec, WM8523_AIF_CTRL2, aifctrl2); |
| |
| return 0; |
| } |
| |
| static int wm8523_set_dai_sysclk(struct snd_soc_dai *codec_dai, |
| int clk_id, unsigned int freq, int dir) |
| { |
| struct snd_soc_codec *codec = codec_dai->codec; |
| struct wm8523_priv *wm8523 = snd_soc_codec_get_drvdata(codec); |
| unsigned int val; |
| int i; |
| |
| wm8523->sysclk = freq; |
| |
| wm8523->rate_constraint.count = 0; |
| for (i = 0; i < ARRAY_SIZE(lrclk_ratios); i++) { |
| val = freq / lrclk_ratios[i].ratio; |
| /* Check that it's a standard rate since core can't |
| * cope with others and having the odd rates confuses |
| * constraint matching. |
| */ |
| switch (val) { |
| case 8000: |
| case 11025: |
| case 16000: |
| case 22050: |
| case 32000: |
| case 44100: |
| case 48000: |
| case 64000: |
| case 88200: |
| case 96000: |
| case 176400: |
| case 192000: |
| dev_dbg(codec->dev, "Supported sample rate: %dHz\n", |
| val); |
| wm8523->rate_constraint_list[i] = val; |
| wm8523->rate_constraint.count++; |
| break; |
| default: |
| dev_dbg(codec->dev, "Skipping sample rate: %dHz\n", |
| val); |
| } |
| } |
| |
| /* Need at least one supported rate... */ |
| if (wm8523->rate_constraint.count == 0) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| |
| static int wm8523_set_dai_fmt(struct snd_soc_dai *codec_dai, |
| unsigned int fmt) |
| { |
| struct snd_soc_codec *codec = codec_dai->codec; |
| u16 aifctrl1 = snd_soc_read(codec, WM8523_AIF_CTRL1); |
| |
| aifctrl1 &= ~(WM8523_BCLK_INV_MASK | WM8523_LRCLK_INV_MASK | |
| WM8523_FMT_MASK | WM8523_AIF_MSTR_MASK); |
| |
| switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { |
| case SND_SOC_DAIFMT_CBM_CFM: |
| aifctrl1 |= WM8523_AIF_MSTR; |
| break; |
| case SND_SOC_DAIFMT_CBS_CFS: |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { |
| case SND_SOC_DAIFMT_I2S: |
| aifctrl1 |= 0x0002; |
| break; |
| case SND_SOC_DAIFMT_RIGHT_J: |
| break; |
| case SND_SOC_DAIFMT_LEFT_J: |
| aifctrl1 |= 0x0001; |
| break; |
| case SND_SOC_DAIFMT_DSP_A: |
| aifctrl1 |= 0x0003; |
| break; |
| case SND_SOC_DAIFMT_DSP_B: |
| aifctrl1 |= 0x0023; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| switch (fmt & SND_SOC_DAIFMT_INV_MASK) { |
| case SND_SOC_DAIFMT_NB_NF: |
| break; |
| case SND_SOC_DAIFMT_IB_IF: |
| aifctrl1 |= WM8523_BCLK_INV | WM8523_LRCLK_INV; |
| break; |
| case SND_SOC_DAIFMT_IB_NF: |
| aifctrl1 |= WM8523_BCLK_INV; |
| break; |
| case SND_SOC_DAIFMT_NB_IF: |
| aifctrl1 |= WM8523_LRCLK_INV; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| snd_soc_write(codec, WM8523_AIF_CTRL1, aifctrl1); |
| |
| return 0; |
| } |
| |
| static int wm8523_set_bias_level(struct snd_soc_codec *codec, |
| enum snd_soc_bias_level level) |
| { |
| struct wm8523_priv *wm8523 = snd_soc_codec_get_drvdata(codec); |
| u16 *reg_cache = codec->reg_cache; |
| int ret, i; |
| |
| switch (level) { |
| case SND_SOC_BIAS_ON: |
| break; |
| |
| case SND_SOC_BIAS_PREPARE: |
| /* Full power on */ |
| snd_soc_update_bits(codec, WM8523_PSCTRL1, |
| WM8523_SYS_ENA_MASK, 3); |
| break; |
| |
| case SND_SOC_BIAS_STANDBY: |
| if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) { |
| ret = regulator_bulk_enable(ARRAY_SIZE(wm8523->supplies), |
| wm8523->supplies); |
| if (ret != 0) { |
| dev_err(codec->dev, |
| "Failed to enable supplies: %d\n", |
| ret); |
| return ret; |
| } |
| |
| /* Initial power up */ |
| snd_soc_update_bits(codec, WM8523_PSCTRL1, |
| WM8523_SYS_ENA_MASK, 1); |
| |
| /* Sync back default/cached values */ |
| for (i = WM8523_AIF_CTRL1; |
| i < WM8523_MAX_REGISTER; i++) |
| snd_soc_write(codec, i, reg_cache[i]); |
| |
| |
| msleep(100); |
| } |
| |
| /* Power up to mute */ |
| snd_soc_update_bits(codec, WM8523_PSCTRL1, |
| WM8523_SYS_ENA_MASK, 2); |
| |
| break; |
| |
| case SND_SOC_BIAS_OFF: |
| /* The chip runs through the power down sequence for us. */ |
| snd_soc_update_bits(codec, WM8523_PSCTRL1, |
| WM8523_SYS_ENA_MASK, 0); |
| msleep(100); |
| |
| regulator_bulk_disable(ARRAY_SIZE(wm8523->supplies), |
| wm8523->supplies); |
| break; |
| } |
| codec->dapm.bias_level = level; |
| return 0; |
| } |
| |
| #define WM8523_RATES SNDRV_PCM_RATE_8000_192000 |
| |
| #define WM8523_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\ |
| SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) |
| |
| static struct snd_soc_dai_ops wm8523_dai_ops = { |
| .startup = wm8523_startup, |
| .hw_params = wm8523_hw_params, |
| .set_sysclk = wm8523_set_dai_sysclk, |
| .set_fmt = wm8523_set_dai_fmt, |
| }; |
| |
| static struct snd_soc_dai_driver wm8523_dai = { |
| .name = "wm8523-hifi", |
| .playback = { |
| .stream_name = "Playback", |
| .channels_min = 2, /* Mono modes not yet supported */ |
| .channels_max = 2, |
| .rates = WM8523_RATES, |
| .formats = WM8523_FORMATS, |
| }, |
| .ops = &wm8523_dai_ops, |
| }; |
| |
| #ifdef CONFIG_PM |
| static int wm8523_suspend(struct snd_soc_codec *codec, pm_message_t state) |
| { |
| wm8523_set_bias_level(codec, SND_SOC_BIAS_OFF); |
| return 0; |
| } |
| |
| static int wm8523_resume(struct snd_soc_codec *codec) |
| { |
| wm8523_set_bias_level(codec, SND_SOC_BIAS_STANDBY); |
| return 0; |
| } |
| #else |
| #define wm8523_suspend NULL |
| #define wm8523_resume NULL |
| #endif |
| |
| static int wm8523_probe(struct snd_soc_codec *codec) |
| { |
| struct wm8523_priv *wm8523 = snd_soc_codec_get_drvdata(codec); |
| u16 *reg_cache = codec->reg_cache; |
| int ret, i; |
| |
| codec->hw_write = (hw_write_t)i2c_master_send; |
| wm8523->rate_constraint.list = &wm8523->rate_constraint_list[0]; |
| wm8523->rate_constraint.count = |
| ARRAY_SIZE(wm8523->rate_constraint_list); |
| |
| ret = snd_soc_codec_set_cache_io(codec, 8, 16, wm8523->control_type); |
| if (ret != 0) { |
| dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret); |
| return ret; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(wm8523->supplies); i++) |
| wm8523->supplies[i].supply = wm8523_supply_names[i]; |
| |
| ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8523->supplies), |
| wm8523->supplies); |
| if (ret != 0) { |
| dev_err(codec->dev, "Failed to request supplies: %d\n", ret); |
| return ret; |
| } |
| |
| ret = regulator_bulk_enable(ARRAY_SIZE(wm8523->supplies), |
| wm8523->supplies); |
| if (ret != 0) { |
| dev_err(codec->dev, "Failed to enable supplies: %d\n", ret); |
| goto err_get; |
| } |
| |
| ret = snd_soc_read(codec, WM8523_DEVICE_ID); |
| if (ret < 0) { |
| dev_err(codec->dev, "Failed to read ID register\n"); |
| goto err_enable; |
| } |
| if (ret != wm8523_reg[WM8523_DEVICE_ID]) { |
| dev_err(codec->dev, "Device is not a WM8523, ID is %x\n", ret); |
| ret = -EINVAL; |
| goto err_enable; |
| } |
| |
| ret = snd_soc_read(codec, WM8523_REVISION); |
| if (ret < 0) { |
| dev_err(codec->dev, "Failed to read revision register\n"); |
| goto err_enable; |
| } |
| dev_info(codec->dev, "revision %c\n", |
| (ret & WM8523_CHIP_REV_MASK) + 'A'); |
| |
| ret = wm8523_reset(codec); |
| if (ret < 0) { |
| dev_err(codec->dev, "Failed to issue reset\n"); |
| goto err_enable; |
| } |
| |
| /* Change some default settings - latch VU and enable ZC */ |
| reg_cache[WM8523_DAC_GAINR] |= WM8523_DACR_VU; |
| reg_cache[WM8523_DAC_CTRL3] |= WM8523_ZC; |
| |
| wm8523_set_bias_level(codec, SND_SOC_BIAS_STANDBY); |
| |
| /* Bias level configuration will have done an extra enable */ |
| regulator_bulk_disable(ARRAY_SIZE(wm8523->supplies), wm8523->supplies); |
| |
| snd_soc_add_controls(codec, wm8523_snd_controls, |
| ARRAY_SIZE(wm8523_snd_controls)); |
| wm8523_add_widgets(codec); |
| |
| return 0; |
| |
| err_enable: |
| regulator_bulk_disable(ARRAY_SIZE(wm8523->supplies), wm8523->supplies); |
| err_get: |
| regulator_bulk_free(ARRAY_SIZE(wm8523->supplies), wm8523->supplies); |
| |
| return ret; |
| } |
| |
| static int wm8523_remove(struct snd_soc_codec *codec) |
| { |
| struct wm8523_priv *wm8523 = snd_soc_codec_get_drvdata(codec); |
| |
| wm8523_set_bias_level(codec, SND_SOC_BIAS_OFF); |
| regulator_bulk_free(ARRAY_SIZE(wm8523->supplies), wm8523->supplies); |
| return 0; |
| } |
| |
| static struct snd_soc_codec_driver soc_codec_dev_wm8523 = { |
| .probe = wm8523_probe, |
| .remove = wm8523_remove, |
| .suspend = wm8523_suspend, |
| .resume = wm8523_resume, |
| .set_bias_level = wm8523_set_bias_level, |
| .reg_cache_size = WM8523_REGISTER_COUNT, |
| .reg_word_size = sizeof(u16), |
| .reg_cache_default = wm8523_reg, |
| .volatile_register = wm8523_volatile_register, |
| }; |
| |
| #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) |
| static __devinit int wm8523_i2c_probe(struct i2c_client *i2c, |
| const struct i2c_device_id *id) |
| { |
| struct wm8523_priv *wm8523; |
| int ret; |
| |
| wm8523 = kzalloc(sizeof(struct wm8523_priv), GFP_KERNEL); |
| if (wm8523 == NULL) |
| return -ENOMEM; |
| |
| i2c_set_clientdata(i2c, wm8523); |
| wm8523->control_type = SND_SOC_I2C; |
| |
| ret = snd_soc_register_codec(&i2c->dev, |
| &soc_codec_dev_wm8523, &wm8523_dai, 1); |
| if (ret < 0) |
| kfree(wm8523); |
| return ret; |
| |
| } |
| |
| static __devexit int wm8523_i2c_remove(struct i2c_client *client) |
| { |
| snd_soc_unregister_codec(&client->dev); |
| kfree(i2c_get_clientdata(client)); |
| return 0; |
| } |
| |
| static const struct i2c_device_id wm8523_i2c_id[] = { |
| { "wm8523", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, wm8523_i2c_id); |
| |
| static struct i2c_driver wm8523_i2c_driver = { |
| .driver = { |
| .name = "wm8523-codec", |
| .owner = THIS_MODULE, |
| }, |
| .probe = wm8523_i2c_probe, |
| .remove = __devexit_p(wm8523_i2c_remove), |
| .id_table = wm8523_i2c_id, |
| }; |
| #endif |
| |
| static int __init wm8523_modinit(void) |
| { |
| int ret; |
| #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) |
| ret = i2c_add_driver(&wm8523_i2c_driver); |
| if (ret != 0) { |
| printk(KERN_ERR "Failed to register WM8523 I2C driver: %d\n", |
| ret); |
| } |
| #endif |
| return 0; |
| } |
| module_init(wm8523_modinit); |
| |
| static void __exit wm8523_exit(void) |
| { |
| #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) |
| i2c_del_driver(&wm8523_i2c_driver); |
| #endif |
| } |
| module_exit(wm8523_exit); |
| |
| MODULE_DESCRIPTION("ASoC WM8523 driver"); |
| MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); |
| MODULE_LICENSE("GPL"); |