| /* |
| * Generic Generic NCR5380 driver |
| * |
| * Copyright 1993, Drew Eckhardt |
| * Visionary Computing |
| * (Unix and Linux consulting and custom programming) |
| * drew@colorado.edu |
| * +1 (303) 440-4894 |
| * |
| * NCR53C400 extensions (c) 1994,1995,1996, Kevin Lentin |
| * K.Lentin@cs.monash.edu.au |
| * |
| * NCR53C400A extensions (c) 1996, Ingmar Baumgart |
| * ingmar@gonzo.schwaben.de |
| * |
| * DTC3181E extensions (c) 1997, Ronald van Cuijlenborg |
| * ronald.van.cuijlenborg@tip.nl or nutty@dds.nl |
| * |
| * Added ISAPNP support for DTC436 adapters, |
| * Thomas Sailer, sailer@ife.ee.ethz.ch |
| * |
| * See Documentation/scsi/g_NCR5380.txt for more info. |
| */ |
| |
| #include <asm/io.h> |
| #include <linux/blkdev.h> |
| #include <linux/module.h> |
| #include <scsi/scsi_host.h> |
| #include "g_NCR5380.h" |
| #include "NCR5380.h" |
| #include <linux/init.h> |
| #include <linux/ioport.h> |
| #include <linux/isa.h> |
| #include <linux/pnp.h> |
| #include <linux/interrupt.h> |
| |
| #define MAX_CARDS 8 |
| |
| /* old-style parameters for compatibility */ |
| static int ncr_irq; |
| static int ncr_addr; |
| static int ncr_5380; |
| static int ncr_53c400; |
| static int ncr_53c400a; |
| static int dtc_3181e; |
| static int hp_c2502; |
| module_param(ncr_irq, int, 0); |
| module_param(ncr_addr, int, 0); |
| module_param(ncr_5380, int, 0); |
| module_param(ncr_53c400, int, 0); |
| module_param(ncr_53c400a, int, 0); |
| module_param(dtc_3181e, int, 0); |
| module_param(hp_c2502, int, 0); |
| |
| static int irq[] = { 0, 0, 0, 0, 0, 0, 0, 0 }; |
| module_param_array(irq, int, NULL, 0); |
| MODULE_PARM_DESC(irq, "IRQ number(s)"); |
| |
| static int base[] = { 0, 0, 0, 0, 0, 0, 0, 0 }; |
| module_param_array(base, int, NULL, 0); |
| MODULE_PARM_DESC(base, "base address(es)"); |
| |
| static int card[] = { -1, -1, -1, -1, -1, -1, -1, -1 }; |
| module_param_array(card, int, NULL, 0); |
| MODULE_PARM_DESC(card, "card type (0=NCR5380, 1=NCR53C400, 2=NCR53C400A, 3=DTC3181E, 4=HP C2502)"); |
| |
| MODULE_ALIAS("g_NCR5380_mmio"); |
| MODULE_LICENSE("GPL"); |
| |
| /* |
| * Configure I/O address of 53C400A or DTC436 by writing magic numbers |
| * to ports 0x779 and 0x379. |
| */ |
| static void magic_configure(int idx, u8 irq, u8 magic[]) |
| { |
| u8 cfg = 0; |
| |
| outb(magic[0], 0x779); |
| outb(magic[1], 0x379); |
| outb(magic[2], 0x379); |
| outb(magic[3], 0x379); |
| outb(magic[4], 0x379); |
| |
| /* allowed IRQs for HP C2502 */ |
| if (irq != 2 && irq != 3 && irq != 4 && irq != 5 && irq != 7) |
| irq = 0; |
| if (idx >= 0 && idx <= 7) |
| cfg = 0x80 | idx | (irq << 4); |
| outb(cfg, 0x379); |
| } |
| |
| static unsigned int ncr_53c400a_ports[] = { |
| 0x280, 0x290, 0x300, 0x310, 0x330, 0x340, 0x348, 0x350, 0 |
| }; |
| static unsigned int dtc_3181e_ports[] = { |
| 0x220, 0x240, 0x280, 0x2a0, 0x2c0, 0x300, 0x320, 0x340, 0 |
| }; |
| static u8 ncr_53c400a_magic[] = { /* 53C400A & DTC436 */ |
| 0x59, 0xb9, 0xc5, 0xae, 0xa6 |
| }; |
| static u8 hp_c2502_magic[] = { /* HP C2502 */ |
| 0x0f, 0x22, 0xf0, 0x20, 0x80 |
| }; |
| |
| static int generic_NCR5380_init_one(struct scsi_host_template *tpnt, |
| struct device *pdev, int base, int irq, int board) |
| { |
| bool is_pmio = base <= 0xffff; |
| int ret; |
| int flags = 0; |
| unsigned int *ports = NULL; |
| u8 *magic = NULL; |
| int i; |
| int port_idx = -1; |
| unsigned long region_size; |
| struct Scsi_Host *instance; |
| struct NCR5380_hostdata *hostdata; |
| u8 __iomem *iomem; |
| |
| switch (board) { |
| case BOARD_NCR5380: |
| flags = FLAG_NO_PSEUDO_DMA | FLAG_DMA_FIXUP; |
| break; |
| case BOARD_NCR53C400A: |
| ports = ncr_53c400a_ports; |
| magic = ncr_53c400a_magic; |
| break; |
| case BOARD_HP_C2502: |
| ports = ncr_53c400a_ports; |
| magic = hp_c2502_magic; |
| break; |
| case BOARD_DTC3181E: |
| ports = dtc_3181e_ports; |
| magic = ncr_53c400a_magic; |
| break; |
| } |
| |
| if (is_pmio && ports && magic) { |
| /* wakeup sequence for the NCR53C400A and DTC3181E */ |
| |
| /* Disable the adapter and look for a free io port */ |
| magic_configure(-1, 0, magic); |
| |
| region_size = 16; |
| if (base) |
| for (i = 0; ports[i]; i++) { |
| if (base == ports[i]) { /* index found */ |
| if (!request_region(ports[i], |
| region_size, |
| "ncr53c80")) |
| return -EBUSY; |
| break; |
| } |
| } |
| else |
| for (i = 0; ports[i]; i++) { |
| if (!request_region(ports[i], region_size, |
| "ncr53c80")) |
| continue; |
| if (inb(ports[i]) == 0xff) |
| break; |
| release_region(ports[i], region_size); |
| } |
| if (ports[i]) { |
| /* At this point we have our region reserved */ |
| magic_configure(i, 0, magic); /* no IRQ yet */ |
| base = ports[i]; |
| outb(0xc0, base + 9); |
| if (inb(base + 9) != 0x80) { |
| ret = -ENODEV; |
| goto out_release; |
| } |
| port_idx = i; |
| } else |
| return -EINVAL; |
| } else if (is_pmio) { |
| /* NCR5380 - no configuration, just grab */ |
| region_size = 8; |
| if (!base || !request_region(base, region_size, "ncr5380")) |
| return -EBUSY; |
| } else { /* MMIO */ |
| region_size = NCR53C400_region_size; |
| if (!request_mem_region(base, region_size, "ncr5380")) |
| return -EBUSY; |
| } |
| |
| if (is_pmio) |
| iomem = ioport_map(base, region_size); |
| else |
| iomem = ioremap(base, region_size); |
| |
| if (!iomem) { |
| ret = -ENOMEM; |
| goto out_release; |
| } |
| |
| instance = scsi_host_alloc(tpnt, sizeof(struct NCR5380_hostdata)); |
| if (instance == NULL) { |
| ret = -ENOMEM; |
| goto out_unmap; |
| } |
| hostdata = shost_priv(instance); |
| |
| hostdata->io = iomem; |
| hostdata->region_size = region_size; |
| |
| if (is_pmio) { |
| hostdata->io_port = base; |
| hostdata->io_width = 1; /* 8-bit PDMA by default */ |
| hostdata->offset = 0; |
| |
| /* |
| * On NCR53C400 boards, NCR5380 registers are mapped 8 past |
| * the base address. |
| */ |
| switch (board) { |
| case BOARD_NCR53C400: |
| hostdata->io_port += 8; |
| hostdata->c400_ctl_status = 0; |
| hostdata->c400_blk_cnt = 1; |
| hostdata->c400_host_buf = 4; |
| break; |
| case BOARD_DTC3181E: |
| hostdata->io_width = 2; /* 16-bit PDMA */ |
| /* fall through */ |
| case BOARD_NCR53C400A: |
| case BOARD_HP_C2502: |
| hostdata->c400_ctl_status = 9; |
| hostdata->c400_blk_cnt = 10; |
| hostdata->c400_host_buf = 8; |
| break; |
| } |
| } else { |
| hostdata->base = base; |
| hostdata->offset = NCR53C400_mem_base; |
| switch (board) { |
| case BOARD_NCR53C400: |
| hostdata->c400_ctl_status = 0x100; |
| hostdata->c400_blk_cnt = 0x101; |
| hostdata->c400_host_buf = 0x104; |
| break; |
| case BOARD_DTC3181E: |
| case BOARD_NCR53C400A: |
| case BOARD_HP_C2502: |
| pr_err(DRV_MODULE_NAME ": unknown register offsets\n"); |
| ret = -EINVAL; |
| goto out_unregister; |
| } |
| } |
| |
| ret = NCR5380_init(instance, flags | FLAG_LATE_DMA_SETUP); |
| if (ret) |
| goto out_unregister; |
| |
| switch (board) { |
| case BOARD_NCR53C400: |
| case BOARD_DTC3181E: |
| case BOARD_NCR53C400A: |
| case BOARD_HP_C2502: |
| NCR5380_write(hostdata->c400_ctl_status, CSR_BASE); |
| } |
| |
| NCR5380_maybe_reset_bus(instance); |
| |
| if (irq != IRQ_AUTO) |
| instance->irq = irq; |
| else |
| instance->irq = NCR5380_probe_irq(instance, 0xffff); |
| |
| /* Compatibility with documented NCR5380 kernel parameters */ |
| if (instance->irq == 255) |
| instance->irq = NO_IRQ; |
| |
| if (instance->irq != NO_IRQ) { |
| /* set IRQ for HP C2502 */ |
| if (board == BOARD_HP_C2502) |
| magic_configure(port_idx, instance->irq, magic); |
| if (request_irq(instance->irq, generic_NCR5380_intr, |
| 0, "NCR5380", instance)) { |
| printk(KERN_WARNING "scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq); |
| instance->irq = NO_IRQ; |
| } |
| } |
| |
| if (instance->irq == NO_IRQ) { |
| printk(KERN_INFO "scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no); |
| printk(KERN_INFO "scsi%d : please jumper the board for a free IRQ.\n", instance->host_no); |
| } |
| |
| ret = scsi_add_host(instance, pdev); |
| if (ret) |
| goto out_free_irq; |
| scsi_scan_host(instance); |
| dev_set_drvdata(pdev, instance); |
| return 0; |
| |
| out_free_irq: |
| if (instance->irq != NO_IRQ) |
| free_irq(instance->irq, instance); |
| NCR5380_exit(instance); |
| out_unregister: |
| scsi_host_put(instance); |
| out_unmap: |
| iounmap(iomem); |
| out_release: |
| if (is_pmio) |
| release_region(base, region_size); |
| else |
| release_mem_region(base, region_size); |
| return ret; |
| } |
| |
| static void generic_NCR5380_release_resources(struct Scsi_Host *instance) |
| { |
| struct NCR5380_hostdata *hostdata = shost_priv(instance); |
| void __iomem *iomem = hostdata->io; |
| unsigned long io_port = hostdata->io_port; |
| unsigned long base = hostdata->base; |
| unsigned long region_size = hostdata->region_size; |
| |
| scsi_remove_host(instance); |
| if (instance->irq != NO_IRQ) |
| free_irq(instance->irq, instance); |
| NCR5380_exit(instance); |
| scsi_host_put(instance); |
| iounmap(iomem); |
| if (io_port) |
| release_region(io_port, region_size); |
| else |
| release_mem_region(base, region_size); |
| } |
| |
| /** |
| * generic_NCR5380_pread - pseudo DMA read |
| * @hostdata: scsi host private data |
| * @dst: buffer to read into |
| * @len: buffer length |
| * |
| * Perform a pseudo DMA mode read from an NCR53C400 or equivalent |
| * controller |
| */ |
| |
| static inline int generic_NCR5380_pread(struct NCR5380_hostdata *hostdata, |
| unsigned char *dst, int len) |
| { |
| int blocks = len / 128; |
| int start = 0; |
| |
| NCR5380_write(hostdata->c400_ctl_status, CSR_BASE | CSR_TRANS_DIR); |
| NCR5380_write(hostdata->c400_blk_cnt, blocks); |
| while (1) { |
| if (NCR5380_read(hostdata->c400_blk_cnt) == 0) |
| break; |
| if (NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ) { |
| printk(KERN_ERR "53C400r: Got 53C80_IRQ start=%d, blocks=%d\n", start, blocks); |
| return -1; |
| } |
| while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY) |
| ; /* FIXME - no timeout */ |
| |
| if (hostdata->io_port && hostdata->io_width == 2) |
| insw(hostdata->io_port + hostdata->c400_host_buf, |
| dst + start, 64); |
| else if (hostdata->io_port) |
| insb(hostdata->io_port + hostdata->c400_host_buf, |
| dst + start, 128); |
| else |
| memcpy_fromio(dst + start, |
| hostdata->io + NCR53C400_host_buffer, 128); |
| |
| start += 128; |
| blocks--; |
| } |
| |
| if (blocks) { |
| while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY) |
| ; /* FIXME - no timeout */ |
| |
| if (hostdata->io_port && hostdata->io_width == 2) |
| insw(hostdata->io_port + hostdata->c400_host_buf, |
| dst + start, 64); |
| else if (hostdata->io_port) |
| insb(hostdata->io_port + hostdata->c400_host_buf, |
| dst + start, 128); |
| else |
| memcpy_fromio(dst + start, |
| hostdata->io + NCR53C400_host_buffer, 128); |
| |
| start += 128; |
| blocks--; |
| } |
| |
| if (!(NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ)) |
| printk("53C400r: no 53C80 gated irq after transfer"); |
| |
| /* wait for 53C80 registers to be available */ |
| while (!(NCR5380_read(hostdata->c400_ctl_status) & CSR_53C80_REG)) |
| ; |
| |
| if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_END_DMA_TRANSFER)) |
| printk(KERN_ERR "53C400r: no end dma signal\n"); |
| |
| return 0; |
| } |
| |
| /** |
| * generic_NCR5380_pwrite - pseudo DMA write |
| * @hostdata: scsi host private data |
| * @dst: buffer to read into |
| * @len: buffer length |
| * |
| * Perform a pseudo DMA mode read from an NCR53C400 or equivalent |
| * controller |
| */ |
| |
| static inline int generic_NCR5380_pwrite(struct NCR5380_hostdata *hostdata, |
| unsigned char *src, int len) |
| { |
| int blocks = len / 128; |
| int start = 0; |
| |
| NCR5380_write(hostdata->c400_ctl_status, CSR_BASE); |
| NCR5380_write(hostdata->c400_blk_cnt, blocks); |
| while (1) { |
| if (NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ) { |
| printk(KERN_ERR "53C400w: Got 53C80_IRQ start=%d, blocks=%d\n", start, blocks); |
| return -1; |
| } |
| |
| if (NCR5380_read(hostdata->c400_blk_cnt) == 0) |
| break; |
| while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY) |
| ; // FIXME - timeout |
| |
| if (hostdata->io_port && hostdata->io_width == 2) |
| outsw(hostdata->io_port + hostdata->c400_host_buf, |
| src + start, 64); |
| else if (hostdata->io_port) |
| outsb(hostdata->io_port + hostdata->c400_host_buf, |
| src + start, 128); |
| else |
| memcpy_toio(hostdata->io + NCR53C400_host_buffer, |
| src + start, 128); |
| |
| start += 128; |
| blocks--; |
| } |
| if (blocks) { |
| while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY) |
| ; // FIXME - no timeout |
| |
| if (hostdata->io_port && hostdata->io_width == 2) |
| outsw(hostdata->io_port + hostdata->c400_host_buf, |
| src + start, 64); |
| else if (hostdata->io_port) |
| outsb(hostdata->io_port + hostdata->c400_host_buf, |
| src + start, 128); |
| else |
| memcpy_toio(hostdata->io + NCR53C400_host_buffer, |
| src + start, 128); |
| |
| start += 128; |
| blocks--; |
| } |
| |
| /* wait for 53C80 registers to be available */ |
| while (!(NCR5380_read(hostdata->c400_ctl_status) & CSR_53C80_REG)) { |
| udelay(4); /* DTC436 chip hangs without this */ |
| /* FIXME - no timeout */ |
| } |
| |
| if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_END_DMA_TRANSFER)) { |
| printk(KERN_ERR "53C400w: no end dma signal\n"); |
| } |
| |
| while (!(NCR5380_read(TARGET_COMMAND_REG) & TCR_LAST_BYTE_SENT)) |
| ; // TIMEOUT |
| return 0; |
| } |
| |
| static int generic_NCR5380_dma_xfer_len(struct NCR5380_hostdata *hostdata, |
| struct scsi_cmnd *cmd) |
| { |
| int transfersize = cmd->transfersize; |
| |
| if (hostdata->flags & FLAG_NO_PSEUDO_DMA) |
| return 0; |
| |
| /* Limit transfers to 32K, for xx400 & xx406 |
| * pseudoDMA that transfers in 128 bytes blocks. |
| */ |
| if (transfersize > 32 * 1024 && cmd->SCp.this_residual && |
| !(cmd->SCp.this_residual % transfersize)) |
| transfersize = 32 * 1024; |
| |
| /* 53C400 datasheet: non-modulo-128-byte transfers should use PIO */ |
| if (transfersize % 128) |
| transfersize = 0; |
| |
| return transfersize; |
| } |
| |
| /* |
| * Include the NCR5380 core code that we build our driver around |
| */ |
| |
| #include "NCR5380.c" |
| |
| static struct scsi_host_template driver_template = { |
| .module = THIS_MODULE, |
| .proc_name = DRV_MODULE_NAME, |
| .name = "Generic NCR5380/NCR53C400 SCSI", |
| .info = generic_NCR5380_info, |
| .queuecommand = generic_NCR5380_queue_command, |
| .eh_abort_handler = generic_NCR5380_abort, |
| .eh_bus_reset_handler = generic_NCR5380_bus_reset, |
| .can_queue = 16, |
| .this_id = 7, |
| .sg_tablesize = SG_ALL, |
| .cmd_per_lun = 2, |
| .use_clustering = DISABLE_CLUSTERING, |
| .cmd_size = NCR5380_CMD_SIZE, |
| .max_sectors = 128, |
| }; |
| |
| |
| static int generic_NCR5380_isa_match(struct device *pdev, unsigned int ndev) |
| { |
| int ret = generic_NCR5380_init_one(&driver_template, pdev, base[ndev], |
| irq[ndev], card[ndev]); |
| if (ret) { |
| if (base[ndev]) |
| printk(KERN_WARNING "Card not found at address 0x%03x\n", |
| base[ndev]); |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| static int generic_NCR5380_isa_remove(struct device *pdev, |
| unsigned int ndev) |
| { |
| generic_NCR5380_release_resources(dev_get_drvdata(pdev)); |
| dev_set_drvdata(pdev, NULL); |
| return 0; |
| } |
| |
| static struct isa_driver generic_NCR5380_isa_driver = { |
| .match = generic_NCR5380_isa_match, |
| .remove = generic_NCR5380_isa_remove, |
| .driver = { |
| .name = DRV_MODULE_NAME |
| }, |
| }; |
| |
| #ifdef CONFIG_PNP |
| static struct pnp_device_id generic_NCR5380_pnp_ids[] = { |
| { .id = "DTC436e", .driver_data = BOARD_DTC3181E }, |
| { .id = "" } |
| }; |
| MODULE_DEVICE_TABLE(pnp, generic_NCR5380_pnp_ids); |
| |
| static int generic_NCR5380_pnp_probe(struct pnp_dev *pdev, |
| const struct pnp_device_id *id) |
| { |
| int base, irq; |
| |
| if (pnp_activate_dev(pdev) < 0) |
| return -EBUSY; |
| |
| base = pnp_port_start(pdev, 0); |
| irq = pnp_irq(pdev, 0); |
| |
| return generic_NCR5380_init_one(&driver_template, &pdev->dev, base, irq, |
| id->driver_data); |
| } |
| |
| static void generic_NCR5380_pnp_remove(struct pnp_dev *pdev) |
| { |
| generic_NCR5380_release_resources(pnp_get_drvdata(pdev)); |
| pnp_set_drvdata(pdev, NULL); |
| } |
| |
| static struct pnp_driver generic_NCR5380_pnp_driver = { |
| .name = DRV_MODULE_NAME, |
| .id_table = generic_NCR5380_pnp_ids, |
| .probe = generic_NCR5380_pnp_probe, |
| .remove = generic_NCR5380_pnp_remove, |
| }; |
| #endif /* defined(CONFIG_PNP) */ |
| |
| static int pnp_registered, isa_registered; |
| |
| static int __init generic_NCR5380_init(void) |
| { |
| int ret = 0; |
| |
| /* compatibility with old-style parameters */ |
| if (irq[0] == 0 && base[0] == 0 && card[0] == -1) { |
| irq[0] = ncr_irq; |
| base[0] = ncr_addr; |
| if (ncr_5380) |
| card[0] = BOARD_NCR5380; |
| if (ncr_53c400) |
| card[0] = BOARD_NCR53C400; |
| if (ncr_53c400a) |
| card[0] = BOARD_NCR53C400A; |
| if (dtc_3181e) |
| card[0] = BOARD_DTC3181E; |
| if (hp_c2502) |
| card[0] = BOARD_HP_C2502; |
| } |
| |
| #ifdef CONFIG_PNP |
| if (!pnp_register_driver(&generic_NCR5380_pnp_driver)) |
| pnp_registered = 1; |
| #endif |
| ret = isa_register_driver(&generic_NCR5380_isa_driver, MAX_CARDS); |
| if (!ret) |
| isa_registered = 1; |
| |
| return (pnp_registered || isa_registered) ? 0 : ret; |
| } |
| |
| static void __exit generic_NCR5380_exit(void) |
| { |
| #ifdef CONFIG_PNP |
| if (pnp_registered) |
| pnp_unregister_driver(&generic_NCR5380_pnp_driver); |
| #endif |
| if (isa_registered) |
| isa_unregister_driver(&generic_NCR5380_isa_driver); |
| } |
| |
| module_init(generic_NCR5380_init); |
| module_exit(generic_NCR5380_exit); |