brcmfmac: use SDIO DPC for control frames.
Control frames are normally handled outside DPC, but sometimes
within DPC. To simplify code always handle control within DPC.
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
index 2c4f0cc..b4f5fe5 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
@@ -44,7 +44,8 @@
#include "chip.h"
#include "firmware.h"
-#define DCMD_RESP_TIMEOUT 2000 /* In milli second */
+#define DCMD_RESP_TIMEOUT 2000 /* In milli second */
+#define CTL_DONE_TIMEOUT 2000 /* In milli second */
#ifdef DEBUG
@@ -495,9 +496,9 @@
u8 *ctrl_frame_buf;
u16 ctrl_frame_len;
bool ctrl_frame_stat;
+ int ctrl_frame_err;
spinlock_t txq_lock; /* protect bus->txq */
- struct semaphore tx_seq_lock; /* protect bus->tx_seq */
wait_queue_head_t ctrl_wait;
wait_queue_head_t dcmd_resp_wait;
@@ -2376,8 +2377,6 @@
/* Send frames until the limit or some other event */
for (cnt = 0; (cnt < maxframes) && data_ok(bus);) {
pkt_num = 1;
- if (down_interruptible(&bus->tx_seq_lock))
- return cnt;
if (bus->txglom)
pkt_num = min_t(u8, bus->tx_max - bus->tx_seq,
bus->sdiodev->txglomsz);
@@ -2393,13 +2392,10 @@
__skb_queue_tail(&pktq, pkt);
}
spin_unlock_bh(&bus->txq_lock);
- if (i == 0) {
- up(&bus->tx_seq_lock);
+ if (i == 0)
break;
- }
ret = brcmf_sdio_txpkt(bus, &pktq, SDPCM_DATA_CHANNEL);
- up(&bus->tx_seq_lock);
cnt += i;
@@ -2743,17 +2739,14 @@
brcmf_sdio_clrintr(bus);
if (bus->ctrl_frame_stat && (bus->clkstate == CLK_AVAIL) &&
- (down_interruptible(&bus->tx_seq_lock) == 0)) {
- if (data_ok(bus)) {
- sdio_claim_host(bus->sdiodev->func[1]);
- err = brcmf_sdio_tx_ctrlframe(bus, bus->ctrl_frame_buf,
- bus->ctrl_frame_len);
- sdio_release_host(bus->sdiodev->func[1]);
-
- bus->ctrl_frame_stat = false;
- brcmf_sdio_wait_event_wakeup(bus);
- }
- up(&bus->tx_seq_lock);
+ data_ok(bus)) {
+ sdio_claim_host(bus->sdiodev->func[1]);
+ err = brcmf_sdio_tx_ctrlframe(bus, bus->ctrl_frame_buf,
+ bus->ctrl_frame_len);
+ sdio_release_host(bus->sdiodev->func[1]);
+ bus->ctrl_frame_err = err;
+ bus->ctrl_frame_stat = false;
+ brcmf_sdio_wait_event_wakeup(bus);
}
/* Send queued frames (limit 1 if rx may still be pending) */
if ((bus->clkstate == CLK_AVAIL) && !atomic_read(&bus->fcstate) &&
@@ -2965,43 +2958,30 @@
struct brcmf_bus *bus_if = dev_get_drvdata(dev);
struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
struct brcmf_sdio *bus = sdiodev->bus;
- int ret = -1;
+ int ret;
brcmf_dbg(TRACE, "Enter\n");
- if (down_interruptible(&bus->tx_seq_lock))
- return -EINTR;
-
- if (!data_ok(bus)) {
- brcmf_dbg(INFO, "No bus credit bus->tx_max %d, bus->tx_seq %d\n",
- bus->tx_max, bus->tx_seq);
- up(&bus->tx_seq_lock);
- /* Send from dpc */
- bus->ctrl_frame_buf = msg;
- bus->ctrl_frame_len = msglen;
- bus->ctrl_frame_stat = true;
-
- wait_event_interruptible_timeout(bus->ctrl_wait,
- !bus->ctrl_frame_stat,
- msecs_to_jiffies(2000));
-
- if (!bus->ctrl_frame_stat) {
- brcmf_dbg(SDIO, "ctrl_frame_stat == false\n");
- ret = 0;
- } else {
- brcmf_dbg(SDIO, "ctrl_frame_stat == true\n");
- bus->ctrl_frame_stat = false;
- if (down_interruptible(&bus->tx_seq_lock))
- return -EINTR;
- ret = -1;
- }
+ /* Send from dpc */
+ bus->ctrl_frame_buf = msg;
+ bus->ctrl_frame_len = msglen;
+ bus->ctrl_frame_stat = true;
+ if (atomic_read(&bus->dpc_tskcnt) == 0) {
+ atomic_inc(&bus->dpc_tskcnt);
+ queue_work(bus->brcmf_wq, &bus->datawork);
}
- if (ret == -1) {
- sdio_claim_host(bus->sdiodev->func[1]);
- brcmf_sdio_bus_sleep(bus, false, false);
- ret = brcmf_sdio_tx_ctrlframe(bus, msg, msglen);
- sdio_release_host(bus->sdiodev->func[1]);
- up(&bus->tx_seq_lock);
+
+ wait_event_interruptible_timeout(bus->ctrl_wait, !bus->ctrl_frame_stat,
+ msecs_to_jiffies(CTL_DONE_TIMEOUT));
+
+ if (!bus->ctrl_frame_stat) {
+ brcmf_dbg(SDIO, "ctrl_frame complete, err=%d\n",
+ bus->ctrl_frame_err);
+ ret = bus->ctrl_frame_err;
+ } else {
+ brcmf_dbg(SDIO, "ctrl_frame timeout\n");
+ bus->ctrl_frame_stat = false;
+ ret = -ETIMEDOUT;
}
if (ret)
@@ -3009,7 +2989,7 @@
else
bus->sdcnt.tx_ctlpkts++;
- return ret ? -EIO : 0;
+ return ret;
}
#ifdef DEBUG
@@ -4165,7 +4145,6 @@
spin_lock_init(&bus->rxctl_lock);
spin_lock_init(&bus->txq_lock);
- sema_init(&bus->tx_seq_lock, 1);
init_waitqueue_head(&bus->ctrl_wait);
init_waitqueue_head(&bus->dcmd_resp_wait);