| /* |
| * Designware application register space functions for Keystone PCI controller |
| * |
| * Copyright (C) 2013-2014 Texas Instruments., Ltd. |
| * http://www.ti.com |
| * |
| * Author: Murali Karicheri <m-karicheri2@ti.com> |
| * |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/irq.h> |
| #include <linux/irqdomain.h> |
| #include <linux/irqreturn.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_pci.h> |
| #include <linux/pci.h> |
| #include <linux/platform_device.h> |
| |
| #include "pcie-designware.h" |
| #include "pci-keystone.h" |
| |
| /* Application register defines */ |
| #define LTSSM_EN_VAL 1 |
| #define LTSSM_STATE_MASK 0x1f |
| #define LTSSM_STATE_L0 0x11 |
| #define DBI_CS2_EN_VAL 0x20 |
| #define OB_XLAT_EN_VAL 2 |
| |
| /* Application registers */ |
| #define CMD_STATUS 0x004 |
| #define CFG_SETUP 0x008 |
| #define OB_SIZE 0x030 |
| #define CFG_PCIM_WIN_SZ_IDX 3 |
| #define CFG_PCIM_WIN_CNT 32 |
| #define SPACE0_REMOTE_CFG_OFFSET 0x1000 |
| #define OB_OFFSET_INDEX(n) (0x200 + (8 * n)) |
| #define OB_OFFSET_HI(n) (0x204 + (8 * n)) |
| |
| /* IRQ register defines */ |
| #define IRQ_EOI 0x050 |
| #define IRQ_STATUS 0x184 |
| #define IRQ_ENABLE_SET 0x188 |
| #define IRQ_ENABLE_CLR 0x18c |
| |
| #define MSI_IRQ 0x054 |
| #define MSI0_IRQ_STATUS 0x104 |
| #define MSI0_IRQ_ENABLE_SET 0x108 |
| #define MSI0_IRQ_ENABLE_CLR 0x10c |
| #define IRQ_STATUS 0x184 |
| #define MSI_IRQ_OFFSET 4 |
| |
| /* Error IRQ bits */ |
| #define ERR_AER BIT(5) /* ECRC error */ |
| #define ERR_AXI BIT(4) /* AXI tag lookup fatal error */ |
| #define ERR_CORR BIT(3) /* Correctable error */ |
| #define ERR_NONFATAL BIT(2) /* Non-fatal error */ |
| #define ERR_FATAL BIT(1) /* Fatal error */ |
| #define ERR_SYS BIT(0) /* System (fatal, non-fatal, or correctable) */ |
| #define ERR_IRQ_ALL (ERR_AER | ERR_AXI | ERR_CORR | \ |
| ERR_NONFATAL | ERR_FATAL | ERR_SYS) |
| #define ERR_FATAL_IRQ (ERR_FATAL | ERR_AXI) |
| #define ERR_IRQ_STATUS_RAW 0x1c0 |
| #define ERR_IRQ_STATUS 0x1c4 |
| #define ERR_IRQ_ENABLE_SET 0x1c8 |
| #define ERR_IRQ_ENABLE_CLR 0x1cc |
| |
| /* Config space registers */ |
| #define DEBUG0 0x728 |
| |
| #define to_keystone_pcie(x) dev_get_drvdata((x)->dev) |
| |
| static inline void update_reg_offset_bit_pos(u32 offset, u32 *reg_offset, |
| u32 *bit_pos) |
| { |
| *reg_offset = offset % 8; |
| *bit_pos = offset >> 3; |
| } |
| |
| phys_addr_t ks_dw_pcie_get_msi_addr(struct pcie_port *pp) |
| { |
| struct dw_pcie *pci = to_dw_pcie_from_pp(pp); |
| struct keystone_pcie *ks_pcie = to_keystone_pcie(pci); |
| |
| return ks_pcie->app.start + MSI_IRQ; |
| } |
| |
| static u32 ks_dw_app_readl(struct keystone_pcie *ks_pcie, u32 offset) |
| { |
| return readl(ks_pcie->va_app_base + offset); |
| } |
| |
| static void ks_dw_app_writel(struct keystone_pcie *ks_pcie, u32 offset, u32 val) |
| { |
| writel(val, ks_pcie->va_app_base + offset); |
| } |
| |
| void ks_dw_pcie_handle_msi_irq(struct keystone_pcie *ks_pcie, int offset) |
| { |
| struct dw_pcie *pci = ks_pcie->pci; |
| struct pcie_port *pp = &pci->pp; |
| struct device *dev = pci->dev; |
| u32 pending, vector; |
| int src, virq; |
| |
| pending = ks_dw_app_readl(ks_pcie, MSI0_IRQ_STATUS + (offset << 4)); |
| |
| /* |
| * MSI0 status bit 0-3 shows vectors 0, 8, 16, 24, MSI1 status bit |
| * shows 1, 9, 17, 25 and so forth |
| */ |
| for (src = 0; src < 4; src++) { |
| if (BIT(src) & pending) { |
| vector = offset + (src << 3); |
| virq = irq_linear_revmap(pp->irq_domain, vector); |
| dev_dbg(dev, "irq: bit %d, vector %d, virq %d\n", |
| src, vector, virq); |
| generic_handle_irq(virq); |
| } |
| } |
| } |
| |
| static void ks_dw_pcie_msi_irq_ack(struct irq_data *d) |
| { |
| u32 offset, reg_offset, bit_pos; |
| struct keystone_pcie *ks_pcie; |
| struct msi_desc *msi; |
| struct pcie_port *pp; |
| struct dw_pcie *pci; |
| |
| msi = irq_data_get_msi_desc(d); |
| pp = (struct pcie_port *) msi_desc_to_pci_sysdata(msi); |
| pci = to_dw_pcie_from_pp(pp); |
| ks_pcie = to_keystone_pcie(pci); |
| offset = d->irq - irq_linear_revmap(pp->irq_domain, 0); |
| update_reg_offset_bit_pos(offset, ®_offset, &bit_pos); |
| |
| ks_dw_app_writel(ks_pcie, MSI0_IRQ_STATUS + (reg_offset << 4), |
| BIT(bit_pos)); |
| ks_dw_app_writel(ks_pcie, IRQ_EOI, reg_offset + MSI_IRQ_OFFSET); |
| } |
| |
| void ks_dw_pcie_msi_set_irq(struct pcie_port *pp, int irq) |
| { |
| u32 reg_offset, bit_pos; |
| struct dw_pcie *pci = to_dw_pcie_from_pp(pp); |
| struct keystone_pcie *ks_pcie = to_keystone_pcie(pci); |
| |
| update_reg_offset_bit_pos(irq, ®_offset, &bit_pos); |
| ks_dw_app_writel(ks_pcie, MSI0_IRQ_ENABLE_SET + (reg_offset << 4), |
| BIT(bit_pos)); |
| } |
| |
| void ks_dw_pcie_msi_clear_irq(struct pcie_port *pp, int irq) |
| { |
| u32 reg_offset, bit_pos; |
| struct dw_pcie *pci = to_dw_pcie_from_pp(pp); |
| struct keystone_pcie *ks_pcie = to_keystone_pcie(pci); |
| |
| update_reg_offset_bit_pos(irq, ®_offset, &bit_pos); |
| ks_dw_app_writel(ks_pcie, MSI0_IRQ_ENABLE_CLR + (reg_offset << 4), |
| BIT(bit_pos)); |
| } |
| |
| static void ks_dw_pcie_msi_irq_mask(struct irq_data *d) |
| { |
| struct keystone_pcie *ks_pcie; |
| struct msi_desc *msi; |
| struct pcie_port *pp; |
| struct dw_pcie *pci; |
| u32 offset; |
| |
| msi = irq_data_get_msi_desc(d); |
| pp = (struct pcie_port *) msi_desc_to_pci_sysdata(msi); |
| pci = to_dw_pcie_from_pp(pp); |
| ks_pcie = to_keystone_pcie(pci); |
| offset = d->irq - irq_linear_revmap(pp->irq_domain, 0); |
| |
| /* Mask the end point if PVM implemented */ |
| if (IS_ENABLED(CONFIG_PCI_MSI)) { |
| if (msi->msi_attrib.maskbit) |
| pci_msi_mask_irq(d); |
| } |
| |
| ks_dw_pcie_msi_clear_irq(pp, offset); |
| } |
| |
| static void ks_dw_pcie_msi_irq_unmask(struct irq_data *d) |
| { |
| struct keystone_pcie *ks_pcie; |
| struct msi_desc *msi; |
| struct pcie_port *pp; |
| struct dw_pcie *pci; |
| u32 offset; |
| |
| msi = irq_data_get_msi_desc(d); |
| pp = (struct pcie_port *) msi_desc_to_pci_sysdata(msi); |
| pci = to_dw_pcie_from_pp(pp); |
| ks_pcie = to_keystone_pcie(pci); |
| offset = d->irq - irq_linear_revmap(pp->irq_domain, 0); |
| |
| /* Mask the end point if PVM implemented */ |
| if (IS_ENABLED(CONFIG_PCI_MSI)) { |
| if (msi->msi_attrib.maskbit) |
| pci_msi_unmask_irq(d); |
| } |
| |
| ks_dw_pcie_msi_set_irq(pp, offset); |
| } |
| |
| static struct irq_chip ks_dw_pcie_msi_irq_chip = { |
| .name = "Keystone-PCIe-MSI-IRQ", |
| .irq_ack = ks_dw_pcie_msi_irq_ack, |
| .irq_mask = ks_dw_pcie_msi_irq_mask, |
| .irq_unmask = ks_dw_pcie_msi_irq_unmask, |
| }; |
| |
| static int ks_dw_pcie_msi_map(struct irq_domain *domain, unsigned int irq, |
| irq_hw_number_t hwirq) |
| { |
| irq_set_chip_and_handler(irq, &ks_dw_pcie_msi_irq_chip, |
| handle_level_irq); |
| irq_set_chip_data(irq, domain->host_data); |
| |
| return 0; |
| } |
| |
| static const struct irq_domain_ops ks_dw_pcie_msi_domain_ops = { |
| .map = ks_dw_pcie_msi_map, |
| }; |
| |
| int ks_dw_pcie_msi_host_init(struct pcie_port *pp, struct msi_controller *chip) |
| { |
| struct dw_pcie *pci = to_dw_pcie_from_pp(pp); |
| struct keystone_pcie *ks_pcie = to_keystone_pcie(pci); |
| struct device *dev = pci->dev; |
| int i; |
| |
| pp->irq_domain = irq_domain_add_linear(ks_pcie->msi_intc_np, |
| MAX_MSI_IRQS, |
| &ks_dw_pcie_msi_domain_ops, |
| chip); |
| if (!pp->irq_domain) { |
| dev_err(dev, "irq domain init failed\n"); |
| return -ENXIO; |
| } |
| |
| for (i = 0; i < MAX_MSI_IRQS; i++) |
| irq_create_mapping(pp->irq_domain, i); |
| |
| return 0; |
| } |
| |
| void ks_dw_pcie_enable_legacy_irqs(struct keystone_pcie *ks_pcie) |
| { |
| int i; |
| |
| for (i = 0; i < MAX_LEGACY_IRQS; i++) |
| ks_dw_app_writel(ks_pcie, IRQ_ENABLE_SET + (i << 4), 0x1); |
| } |
| |
| void ks_dw_pcie_handle_legacy_irq(struct keystone_pcie *ks_pcie, int offset) |
| { |
| struct dw_pcie *pci = ks_pcie->pci; |
| struct device *dev = pci->dev; |
| u32 pending; |
| int virq; |
| |
| pending = ks_dw_app_readl(ks_pcie, IRQ_STATUS + (offset << 4)); |
| |
| if (BIT(0) & pending) { |
| virq = irq_linear_revmap(ks_pcie->legacy_irq_domain, offset); |
| dev_dbg(dev, ": irq: irq_offset %d, virq %d\n", offset, virq); |
| generic_handle_irq(virq); |
| } |
| |
| /* EOI the INTx interrupt */ |
| ks_dw_app_writel(ks_pcie, IRQ_EOI, offset); |
| } |
| |
| void ks_dw_pcie_enable_error_irq(struct keystone_pcie *ks_pcie) |
| { |
| ks_dw_app_writel(ks_pcie, ERR_IRQ_ENABLE_SET, ERR_IRQ_ALL); |
| } |
| |
| irqreturn_t ks_dw_pcie_handle_error_irq(struct keystone_pcie *ks_pcie) |
| { |
| u32 status; |
| |
| status = ks_dw_app_readl(ks_pcie, ERR_IRQ_STATUS_RAW) & ERR_IRQ_ALL; |
| if (!status) |
| return IRQ_NONE; |
| |
| if (status & ERR_FATAL_IRQ) |
| dev_err(ks_pcie->pci->dev, "fatal error (status %#010x)\n", |
| status); |
| |
| /* Ack the IRQ; status bits are RW1C */ |
| ks_dw_app_writel(ks_pcie, ERR_IRQ_STATUS, status); |
| return IRQ_HANDLED; |
| } |
| |
| static void ks_dw_pcie_ack_legacy_irq(struct irq_data *d) |
| { |
| } |
| |
| static void ks_dw_pcie_mask_legacy_irq(struct irq_data *d) |
| { |
| } |
| |
| static void ks_dw_pcie_unmask_legacy_irq(struct irq_data *d) |
| { |
| } |
| |
| static struct irq_chip ks_dw_pcie_legacy_irq_chip = { |
| .name = "Keystone-PCI-Legacy-IRQ", |
| .irq_ack = ks_dw_pcie_ack_legacy_irq, |
| .irq_mask = ks_dw_pcie_mask_legacy_irq, |
| .irq_unmask = ks_dw_pcie_unmask_legacy_irq, |
| }; |
| |
| static int ks_dw_pcie_init_legacy_irq_map(struct irq_domain *d, |
| unsigned int irq, irq_hw_number_t hw_irq) |
| { |
| irq_set_chip_and_handler(irq, &ks_dw_pcie_legacy_irq_chip, |
| handle_level_irq); |
| irq_set_chip_data(irq, d->host_data); |
| |
| return 0; |
| } |
| |
| static const struct irq_domain_ops ks_dw_pcie_legacy_irq_domain_ops = { |
| .map = ks_dw_pcie_init_legacy_irq_map, |
| .xlate = irq_domain_xlate_onetwocell, |
| }; |
| |
| /** |
| * ks_dw_pcie_set_dbi_mode() - Set DBI mode to access overlaid BAR mask |
| * registers |
| * |
| * Since modification of dbi_cs2 involves different clock domain, read the |
| * status back to ensure the transition is complete. |
| */ |
| static void ks_dw_pcie_set_dbi_mode(struct keystone_pcie *ks_pcie) |
| { |
| u32 val; |
| |
| val = ks_dw_app_readl(ks_pcie, CMD_STATUS); |
| ks_dw_app_writel(ks_pcie, CMD_STATUS, DBI_CS2_EN_VAL | val); |
| |
| do { |
| val = ks_dw_app_readl(ks_pcie, CMD_STATUS); |
| } while (!(val & DBI_CS2_EN_VAL)); |
| } |
| |
| /** |
| * ks_dw_pcie_clear_dbi_mode() - Disable DBI mode |
| * |
| * Since modification of dbi_cs2 involves different clock domain, read the |
| * status back to ensure the transition is complete. |
| */ |
| static void ks_dw_pcie_clear_dbi_mode(struct keystone_pcie *ks_pcie) |
| { |
| u32 val; |
| |
| val = ks_dw_app_readl(ks_pcie, CMD_STATUS); |
| ks_dw_app_writel(ks_pcie, CMD_STATUS, ~DBI_CS2_EN_VAL & val); |
| |
| do { |
| val = ks_dw_app_readl(ks_pcie, CMD_STATUS); |
| } while (val & DBI_CS2_EN_VAL); |
| } |
| |
| void ks_dw_pcie_setup_rc_app_regs(struct keystone_pcie *ks_pcie) |
| { |
| struct dw_pcie *pci = ks_pcie->pci; |
| struct pcie_port *pp = &pci->pp; |
| u32 start = pp->mem->start, end = pp->mem->end; |
| int i, tr_size; |
| u32 val; |
| |
| /* Disable BARs for inbound access */ |
| ks_dw_pcie_set_dbi_mode(ks_pcie); |
| dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, 0); |
| dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_1, 0); |
| ks_dw_pcie_clear_dbi_mode(ks_pcie); |
| |
| /* Set outbound translation size per window division */ |
| ks_dw_app_writel(ks_pcie, OB_SIZE, CFG_PCIM_WIN_SZ_IDX & 0x7); |
| |
| tr_size = (1 << (CFG_PCIM_WIN_SZ_IDX & 0x7)) * SZ_1M; |
| |
| /* Using Direct 1:1 mapping of RC <-> PCI memory space */ |
| for (i = 0; (i < CFG_PCIM_WIN_CNT) && (start < end); i++) { |
| ks_dw_app_writel(ks_pcie, OB_OFFSET_INDEX(i), start | 1); |
| ks_dw_app_writel(ks_pcie, OB_OFFSET_HI(i), 0); |
| start += tr_size; |
| } |
| |
| /* Enable OB translation */ |
| val = ks_dw_app_readl(ks_pcie, CMD_STATUS); |
| ks_dw_app_writel(ks_pcie, CMD_STATUS, OB_XLAT_EN_VAL | val); |
| } |
| |
| /** |
| * ks_pcie_cfg_setup() - Set up configuration space address for a device |
| * |
| * @ks_pcie: ptr to keystone_pcie structure |
| * @bus: Bus number the device is residing on |
| * @devfn: device, function number info |
| * |
| * Forms and returns the address of configuration space mapped in PCIESS |
| * address space 0. Also configures CFG_SETUP for remote configuration space |
| * access. |
| * |
| * The address space has two regions to access configuration - local and remote. |
| * We access local region for bus 0 (as RC is attached on bus 0) and remote |
| * region for others with TYPE 1 access when bus > 1. As for device on bus = 1, |
| * we will do TYPE 0 access as it will be on our secondary bus (logical). |
| * CFG_SETUP is needed only for remote configuration access. |
| */ |
| static void __iomem *ks_pcie_cfg_setup(struct keystone_pcie *ks_pcie, u8 bus, |
| unsigned int devfn) |
| { |
| u8 device = PCI_SLOT(devfn), function = PCI_FUNC(devfn); |
| struct dw_pcie *pci = ks_pcie->pci; |
| struct pcie_port *pp = &pci->pp; |
| u32 regval; |
| |
| if (bus == 0) |
| return pci->dbi_base; |
| |
| regval = (bus << 16) | (device << 8) | function; |
| |
| /* |
| * Since Bus#1 will be a virtual bus, we need to have TYPE0 |
| * access only. |
| * TYPE 1 |
| */ |
| if (bus != 1) |
| regval |= BIT(24); |
| |
| ks_dw_app_writel(ks_pcie, CFG_SETUP, regval); |
| return pp->va_cfg0_base; |
| } |
| |
| int ks_dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus, |
| unsigned int devfn, int where, int size, u32 *val) |
| { |
| struct dw_pcie *pci = to_dw_pcie_from_pp(pp); |
| struct keystone_pcie *ks_pcie = to_keystone_pcie(pci); |
| u8 bus_num = bus->number; |
| void __iomem *addr; |
| |
| addr = ks_pcie_cfg_setup(ks_pcie, bus_num, devfn); |
| |
| return dw_pcie_read(addr + where, size, val); |
| } |
| |
| int ks_dw_pcie_wr_other_conf(struct pcie_port *pp, struct pci_bus *bus, |
| unsigned int devfn, int where, int size, u32 val) |
| { |
| struct dw_pcie *pci = to_dw_pcie_from_pp(pp); |
| struct keystone_pcie *ks_pcie = to_keystone_pcie(pci); |
| u8 bus_num = bus->number; |
| void __iomem *addr; |
| |
| addr = ks_pcie_cfg_setup(ks_pcie, bus_num, devfn); |
| |
| return dw_pcie_write(addr + where, size, val); |
| } |
| |
| /** |
| * ks_dw_pcie_v3_65_scan_bus() - keystone scan_bus post initialization |
| * |
| * This sets BAR0 to enable inbound access for MSI_IRQ register |
| */ |
| void ks_dw_pcie_v3_65_scan_bus(struct pcie_port *pp) |
| { |
| struct dw_pcie *pci = to_dw_pcie_from_pp(pp); |
| struct keystone_pcie *ks_pcie = to_keystone_pcie(pci); |
| |
| /* Configure and set up BAR0 */ |
| ks_dw_pcie_set_dbi_mode(ks_pcie); |
| |
| /* Enable BAR0 */ |
| dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, 1); |
| dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, SZ_4K - 1); |
| |
| ks_dw_pcie_clear_dbi_mode(ks_pcie); |
| |
| /* |
| * For BAR0, just setting bus address for inbound writes (MSI) should |
| * be sufficient. Use physical address to avoid any conflicts. |
| */ |
| dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, ks_pcie->app.start); |
| } |
| |
| /** |
| * ks_dw_pcie_link_up() - Check if link up |
| */ |
| int ks_dw_pcie_link_up(struct dw_pcie *pci) |
| { |
| u32 val; |
| |
| val = dw_pcie_readl_dbi(pci, DEBUG0); |
| return (val & LTSSM_STATE_MASK) == LTSSM_STATE_L0; |
| } |
| |
| void ks_dw_pcie_initiate_link_train(struct keystone_pcie *ks_pcie) |
| { |
| u32 val; |
| |
| /* Disable Link training */ |
| val = ks_dw_app_readl(ks_pcie, CMD_STATUS); |
| val &= ~LTSSM_EN_VAL; |
| ks_dw_app_writel(ks_pcie, CMD_STATUS, LTSSM_EN_VAL | val); |
| |
| /* Initiate Link Training */ |
| val = ks_dw_app_readl(ks_pcie, CMD_STATUS); |
| ks_dw_app_writel(ks_pcie, CMD_STATUS, LTSSM_EN_VAL | val); |
| } |
| |
| /** |
| * ks_dw_pcie_host_init() - initialize host for v3_65 dw hardware |
| * |
| * Ioremap the register resources, initialize legacy irq domain |
| * and call dw_pcie_v3_65_host_init() API to initialize the Keystone |
| * PCI host controller. |
| */ |
| int __init ks_dw_pcie_host_init(struct keystone_pcie *ks_pcie, |
| struct device_node *msi_intc_np) |
| { |
| struct dw_pcie *pci = ks_pcie->pci; |
| struct pcie_port *pp = &pci->pp; |
| struct device *dev = pci->dev; |
| struct platform_device *pdev = to_platform_device(dev); |
| struct resource *res; |
| |
| /* Index 0 is the config reg. space address */ |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| pci->dbi_base = devm_pci_remap_cfg_resource(dev, res); |
| if (IS_ERR(pci->dbi_base)) |
| return PTR_ERR(pci->dbi_base); |
| |
| /* |
| * We set these same and is used in pcie rd/wr_other_conf |
| * functions |
| */ |
| pp->va_cfg0_base = pci->dbi_base + SPACE0_REMOTE_CFG_OFFSET; |
| pp->va_cfg1_base = pp->va_cfg0_base; |
| |
| /* Index 1 is the application reg. space address */ |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 1); |
| ks_pcie->va_app_base = devm_ioremap_resource(dev, res); |
| if (IS_ERR(ks_pcie->va_app_base)) |
| return PTR_ERR(ks_pcie->va_app_base); |
| |
| ks_pcie->app = *res; |
| |
| /* Create legacy IRQ domain */ |
| ks_pcie->legacy_irq_domain = |
| irq_domain_add_linear(ks_pcie->legacy_intc_np, |
| MAX_LEGACY_IRQS, |
| &ks_dw_pcie_legacy_irq_domain_ops, |
| NULL); |
| if (!ks_pcie->legacy_irq_domain) { |
| dev_err(dev, "Failed to add irq domain for legacy irqs\n"); |
| return -EINVAL; |
| } |
| |
| return dw_pcie_host_init(pp); |
| } |