ALSA: hda - Replace with standard printk
Use dev_err() and co for messages from HD-audio controller and codec
drivers. The codec drivers are mostly bound with codec objects, so
some helper macros, codec_err(), codec_info(), etc, are provided.
They merely wrap the corresponding dev_xxx().
There are a few places still calling snd_printk() and its variants
as they are called without the codec or device context.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/sound/pci/hda/hda_auto_parser.c b/sound/pci/hda/hda_auto_parser.c
index 47ad31c..8de7cfa 100644
--- a/sound/pci/hda/hda_auto_parser.c
+++ b/sound/pci/hda/hda_auto_parser.c
@@ -313,9 +313,9 @@
}
if (hsmic)
- snd_printdd("Told to look for a headset mic, but didn't find any.\n");
+ codec_dbg(codec, "Told to look for a headset mic, but didn't find any.\n");
if (hpmic)
- snd_printdd("Told to look for a headphone mic, but didn't find any.\n");
+ codec_dbg(codec, "Told to look for a headphone mic, but didn't find any.\n");
}
/* FIX-UP:
@@ -384,33 +384,33 @@
/*
* debug prints of the parsed results
*/
- snd_printd("autoconfig: line_outs=%d (0x%x/0x%x/0x%x/0x%x/0x%x) type:%s\n",
+ codec_info(codec, "autoconfig: line_outs=%d (0x%x/0x%x/0x%x/0x%x/0x%x) type:%s\n",
cfg->line_outs, cfg->line_out_pins[0], cfg->line_out_pins[1],
cfg->line_out_pins[2], cfg->line_out_pins[3],
cfg->line_out_pins[4],
cfg->line_out_type == AUTO_PIN_HP_OUT ? "hp" :
(cfg->line_out_type == AUTO_PIN_SPEAKER_OUT ?
"speaker" : "line"));
- snd_printd(" speaker_outs=%d (0x%x/0x%x/0x%x/0x%x/0x%x)\n",
+ codec_info(codec, " speaker_outs=%d (0x%x/0x%x/0x%x/0x%x/0x%x)\n",
cfg->speaker_outs, cfg->speaker_pins[0],
cfg->speaker_pins[1], cfg->speaker_pins[2],
cfg->speaker_pins[3], cfg->speaker_pins[4]);
- snd_printd(" hp_outs=%d (0x%x/0x%x/0x%x/0x%x/0x%x)\n",
+ codec_info(codec, " hp_outs=%d (0x%x/0x%x/0x%x/0x%x/0x%x)\n",
cfg->hp_outs, cfg->hp_pins[0],
cfg->hp_pins[1], cfg->hp_pins[2],
cfg->hp_pins[3], cfg->hp_pins[4]);
- snd_printd(" mono: mono_out=0x%x\n", cfg->mono_out_pin);
+ codec_info(codec, " mono: mono_out=0x%x\n", cfg->mono_out_pin);
if (cfg->dig_outs)
- snd_printd(" dig-out=0x%x/0x%x\n",
+ codec_info(codec, " dig-out=0x%x/0x%x\n",
cfg->dig_out_pins[0], cfg->dig_out_pins[1]);
- snd_printd(" inputs:\n");
+ codec_info(codec, " inputs:\n");
for (i = 0; i < cfg->num_inputs; i++) {
- snd_printd(" %s=0x%x\n",
+ codec_info(codec, " %s=0x%x\n",
hda_get_autocfg_input_label(codec, cfg, i),
cfg->inputs[i].pin);
}
if (cfg->dig_in_pin)
- snd_printd(" dig-in=0x%x\n", cfg->dig_in_pin);
+ codec_info(codec, " dig-in=0x%x\n", cfg->dig_in_pin);
return 0;
}
@@ -774,38 +774,33 @@
case HDA_FIXUP_PINS:
if (action != HDA_FIXUP_ACT_PRE_PROBE || !fix->v.pins)
break;
- snd_printdd(KERN_INFO SFX
- "%s: Apply pincfg for %s\n",
+ codec_dbg(codec, "%s: Apply pincfg for %s\n",
codec->chip_name, modelname);
snd_hda_apply_pincfgs(codec, fix->v.pins);
break;
case HDA_FIXUP_VERBS:
if (action != HDA_FIXUP_ACT_PROBE || !fix->v.verbs)
break;
- snd_printdd(KERN_INFO SFX
- "%s: Apply fix-verbs for %s\n",
+ codec_dbg(codec, "%s: Apply fix-verbs for %s\n",
codec->chip_name, modelname);
snd_hda_add_verbs(codec, fix->v.verbs);
break;
case HDA_FIXUP_FUNC:
if (!fix->v.func)
break;
- snd_printdd(KERN_INFO SFX
- "%s: Apply fix-func for %s\n",
+ codec_dbg(codec, "%s: Apply fix-func for %s\n",
codec->chip_name, modelname);
fix->v.func(codec, fix, action);
break;
case HDA_FIXUP_PINCTLS:
if (action != HDA_FIXUP_ACT_PROBE || !fix->v.pins)
break;
- snd_printdd(KERN_INFO SFX
- "%s: Apply pinctl for %s\n",
+ codec_dbg(codec, "%s: Apply pinctl for %s\n",
codec->chip_name, modelname);
set_pin_targets(codec, fix->v.pins);
break;
default:
- snd_printk(KERN_ERR SFX
- "%s: Invalid fixup type %d\n",
+ codec_err(codec, "%s: Invalid fixup type %d\n",
codec->chip_name, fix->type);
break;
}