mlxsw: Add interface to access registers and process events
Ethernet Management Datagrams (EMADs) are Ethernet packets sent between
the host and the device in order to configure the available device registers.
Another use case is notifications sent from the device to the host,
letting it know about certain events, such as port up / down.
Add the ability to construct EMADs with provisions to construct and
parse the registers' payloads. Implement EMAD transaction layer
which is responsible for the reliable transmission of EMADs. Also, add
an infrastructure used by the switch driver to register for particular
events generated by the device.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Elad Raz <eladr@mellanox.com>
Reviewed-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/mellanox/mlxsw/core.c b/drivers/net/ethernet/mellanox/mlxsw/core.c
index a4bb94b..ad66ae4 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/core.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/core.c
@@ -44,12 +44,27 @@
#include <linux/seq_file.h>
#include <linux/u64_stats_sync.h>
#include <linux/netdevice.h>
+#include <linux/wait.h>
+#include <linux/skbuff.h>
+#include <linux/etherdevice.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <linux/string.h>
+#include <linux/gfp.h>
+#include <linux/random.h>
+#include <linux/jiffies.h>
+#include <linux/mutex.h>
+#include <linux/rcupdate.h>
+#include <linux/slab.h>
+#include <asm/byteorder.h>
#include "core.h"
#include "item.h"
#include "cmd.h"
#include "port.h"
#include "trap.h"
+#include "emad.h"
+#include "reg.h"
static LIST_HEAD(mlxsw_core_driver_list);
static DEFINE_SPINLOCK(mlxsw_core_driver_list_lock);
@@ -76,6 +91,15 @@
void *bus_priv;
const struct mlxsw_bus_info *bus_info;
struct list_head rx_listener_list;
+ struct list_head event_listener_list;
+ struct {
+ struct sk_buff *resp_skb;
+ u64 tid;
+ wait_queue_head_t wait;
+ bool trans_active;
+ struct mutex lock; /* One EMAD transaction at a time. */
+ bool use_emad;
+ } emad;
struct mlxsw_core_pcpu_stats __percpu *pcpu_stats;
struct dentry *dbg_dir;
struct {
@@ -92,6 +116,473 @@
void *priv;
};
+struct mlxsw_event_listener_item {
+ struct list_head list;
+ struct mlxsw_event_listener el;
+ void *priv;
+};
+
+/******************
+ * EMAD processing
+ ******************/
+
+/* emad_eth_hdr_dmac
+ * Destination MAC in EMAD's Ethernet header.
+ * Must be set to 01:02:c9:00:00:01
+ */
+MLXSW_ITEM_BUF(emad, eth_hdr, dmac, 0x00, 6);
+
+/* emad_eth_hdr_smac
+ * Source MAC in EMAD's Ethernet header.
+ * Must be set to 00:02:c9:01:02:03
+ */
+MLXSW_ITEM_BUF(emad, eth_hdr, smac, 0x06, 6);
+
+/* emad_eth_hdr_ethertype
+ * Ethertype in EMAD's Ethernet header.
+ * Must be set to 0x8932
+ */
+MLXSW_ITEM32(emad, eth_hdr, ethertype, 0x0C, 16, 16);
+
+/* emad_eth_hdr_mlx_proto
+ * Mellanox protocol.
+ * Must be set to 0x0.
+ */
+MLXSW_ITEM32(emad, eth_hdr, mlx_proto, 0x0C, 8, 8);
+
+/* emad_eth_hdr_ver
+ * Mellanox protocol version.
+ * Must be set to 0x0.
+ */
+MLXSW_ITEM32(emad, eth_hdr, ver, 0x0C, 4, 4);
+
+/* emad_op_tlv_type
+ * Type of the TLV.
+ * Must be set to 0x1 (operation TLV).
+ */
+MLXSW_ITEM32(emad, op_tlv, type, 0x00, 27, 5);
+
+/* emad_op_tlv_len
+ * Length of the operation TLV in u32.
+ * Must be set to 0x4.
+ */
+MLXSW_ITEM32(emad, op_tlv, len, 0x00, 16, 11);
+
+/* emad_op_tlv_dr
+ * Direct route bit. Setting to 1 indicates the EMAD is a direct route
+ * EMAD. DR TLV must follow.
+ *
+ * Note: Currently not supported and must not be set.
+ */
+MLXSW_ITEM32(emad, op_tlv, dr, 0x00, 15, 1);
+
+/* emad_op_tlv_status
+ * Returned status in case of EMAD response. Must be set to 0 in case
+ * of EMAD request.
+ * 0x0 - success
+ * 0x1 - device is busy. Requester should retry
+ * 0x2 - Mellanox protocol version not supported
+ * 0x3 - unknown TLV
+ * 0x4 - register not supported
+ * 0x5 - operation class not supported
+ * 0x6 - EMAD method not supported
+ * 0x7 - bad parameter (e.g. port out of range)
+ * 0x8 - resource not available
+ * 0x9 - message receipt acknowledgment. Requester should retry
+ * 0x70 - internal error
+ */
+MLXSW_ITEM32(emad, op_tlv, status, 0x00, 8, 7);
+
+/* emad_op_tlv_register_id
+ * Register ID of register within register TLV.
+ */
+MLXSW_ITEM32(emad, op_tlv, register_id, 0x04, 16, 16);
+
+/* emad_op_tlv_r
+ * Response bit. Setting to 1 indicates Response, otherwise request.
+ */
+MLXSW_ITEM32(emad, op_tlv, r, 0x04, 15, 1);
+
+/* emad_op_tlv_method
+ * EMAD method type.
+ * 0x1 - query
+ * 0x2 - write
+ * 0x3 - send (currently not supported)
+ * 0x4 - event
+ */
+MLXSW_ITEM32(emad, op_tlv, method, 0x04, 8, 7);
+
+/* emad_op_tlv_class
+ * EMAD operation class. Must be set to 0x1 (REG_ACCESS).
+ */
+MLXSW_ITEM32(emad, op_tlv, class, 0x04, 0, 8);
+
+/* emad_op_tlv_tid
+ * EMAD transaction ID. Used for pairing request and response EMADs.
+ */
+MLXSW_ITEM64(emad, op_tlv, tid, 0x08, 0, 64);
+
+/* emad_reg_tlv_type
+ * Type of the TLV.
+ * Must be set to 0x3 (register TLV).
+ */
+MLXSW_ITEM32(emad, reg_tlv, type, 0x00, 27, 5);
+
+/* emad_reg_tlv_len
+ * Length of the operation TLV in u32.
+ */
+MLXSW_ITEM32(emad, reg_tlv, len, 0x00, 16, 11);
+
+/* emad_end_tlv_type
+ * Type of the TLV.
+ * Must be set to 0x0 (end TLV).
+ */
+MLXSW_ITEM32(emad, end_tlv, type, 0x00, 27, 5);
+
+/* emad_end_tlv_len
+ * Length of the end TLV in u32.
+ * Must be set to 1.
+ */
+MLXSW_ITEM32(emad, end_tlv, len, 0x00, 16, 11);
+
+enum mlxsw_core_reg_access_type {
+ MLXSW_CORE_REG_ACCESS_TYPE_QUERY,
+ MLXSW_CORE_REG_ACCESS_TYPE_WRITE,
+};
+
+static inline const char *
+mlxsw_core_reg_access_type_str(enum mlxsw_core_reg_access_type type)
+{
+ switch (type) {
+ case MLXSW_CORE_REG_ACCESS_TYPE_QUERY:
+ return "query";
+ case MLXSW_CORE_REG_ACCESS_TYPE_WRITE:
+ return "write";
+ }
+ BUG();
+}
+
+static void mlxsw_emad_pack_end_tlv(char *end_tlv)
+{
+ mlxsw_emad_end_tlv_type_set(end_tlv, MLXSW_EMAD_TLV_TYPE_END);
+ mlxsw_emad_end_tlv_len_set(end_tlv, MLXSW_EMAD_END_TLV_LEN);
+}
+
+static void mlxsw_emad_pack_reg_tlv(char *reg_tlv,
+ const struct mlxsw_reg_info *reg,
+ char *payload)
+{
+ mlxsw_emad_reg_tlv_type_set(reg_tlv, MLXSW_EMAD_TLV_TYPE_REG);
+ mlxsw_emad_reg_tlv_len_set(reg_tlv, reg->len / sizeof(u32) + 1);
+ memcpy(reg_tlv + sizeof(u32), payload, reg->len);
+}
+
+static void mlxsw_emad_pack_op_tlv(char *op_tlv,
+ const struct mlxsw_reg_info *reg,
+ enum mlxsw_core_reg_access_type type,
+ struct mlxsw_core *mlxsw_core)
+{
+ mlxsw_emad_op_tlv_type_set(op_tlv, MLXSW_EMAD_TLV_TYPE_OP);
+ mlxsw_emad_op_tlv_len_set(op_tlv, MLXSW_EMAD_OP_TLV_LEN);
+ mlxsw_emad_op_tlv_dr_set(op_tlv, 0);
+ mlxsw_emad_op_tlv_status_set(op_tlv, 0);
+ mlxsw_emad_op_tlv_register_id_set(op_tlv, reg->id);
+ mlxsw_emad_op_tlv_r_set(op_tlv, MLXSW_EMAD_OP_TLV_REQUEST);
+ if (MLXSW_CORE_REG_ACCESS_TYPE_QUERY == type)
+ mlxsw_emad_op_tlv_method_set(op_tlv,
+ MLXSW_EMAD_OP_TLV_METHOD_QUERY);
+ else
+ mlxsw_emad_op_tlv_method_set(op_tlv,
+ MLXSW_EMAD_OP_TLV_METHOD_WRITE);
+ mlxsw_emad_op_tlv_class_set(op_tlv,
+ MLXSW_EMAD_OP_TLV_CLASS_REG_ACCESS);
+ mlxsw_emad_op_tlv_tid_set(op_tlv, mlxsw_core->emad.tid);
+}
+
+static int mlxsw_emad_construct_eth_hdr(struct sk_buff *skb)
+{
+ char *eth_hdr = skb_push(skb, MLXSW_EMAD_ETH_HDR_LEN);
+
+ mlxsw_emad_eth_hdr_dmac_memcpy_to(eth_hdr, MLXSW_EMAD_EH_DMAC);
+ mlxsw_emad_eth_hdr_smac_memcpy_to(eth_hdr, MLXSW_EMAD_EH_SMAC);
+ mlxsw_emad_eth_hdr_ethertype_set(eth_hdr, MLXSW_EMAD_EH_ETHERTYPE);
+ mlxsw_emad_eth_hdr_mlx_proto_set(eth_hdr, MLXSW_EMAD_EH_MLX_PROTO);
+ mlxsw_emad_eth_hdr_ver_set(eth_hdr, MLXSW_EMAD_EH_PROTO_VERSION);
+
+ skb_reset_mac_header(skb);
+
+ return 0;
+}
+
+static void mlxsw_emad_construct(struct sk_buff *skb,
+ const struct mlxsw_reg_info *reg,
+ char *payload,
+ enum mlxsw_core_reg_access_type type,
+ struct mlxsw_core *mlxsw_core)
+{
+ char *buf;
+
+ buf = skb_push(skb, MLXSW_EMAD_END_TLV_LEN * sizeof(u32));
+ mlxsw_emad_pack_end_tlv(buf);
+
+ buf = skb_push(skb, reg->len + sizeof(u32));
+ mlxsw_emad_pack_reg_tlv(buf, reg, payload);
+
+ buf = skb_push(skb, MLXSW_EMAD_OP_TLV_LEN * sizeof(u32));
+ mlxsw_emad_pack_op_tlv(buf, reg, type, mlxsw_core);
+
+ mlxsw_emad_construct_eth_hdr(skb);
+}
+
+static char *mlxsw_emad_op_tlv(const struct sk_buff *skb)
+{
+ return ((char *) (skb->data + MLXSW_EMAD_ETH_HDR_LEN));
+}
+
+static char *mlxsw_emad_reg_tlv(const struct sk_buff *skb)
+{
+ return ((char *) (skb->data + MLXSW_EMAD_ETH_HDR_LEN +
+ MLXSW_EMAD_OP_TLV_LEN * sizeof(u32)));
+}
+
+static char *mlxsw_emad_reg_payload(const char *op_tlv)
+{
+ return ((char *) (op_tlv + (MLXSW_EMAD_OP_TLV_LEN + 1) * sizeof(u32)));
+}
+
+static u64 mlxsw_emad_get_tid(const struct sk_buff *skb)
+{
+ char *op_tlv;
+
+ op_tlv = mlxsw_emad_op_tlv(skb);
+ return mlxsw_emad_op_tlv_tid_get(op_tlv);
+}
+
+static bool mlxsw_emad_is_resp(const struct sk_buff *skb)
+{
+ char *op_tlv;
+
+ op_tlv = mlxsw_emad_op_tlv(skb);
+ return (MLXSW_EMAD_OP_TLV_RESPONSE == mlxsw_emad_op_tlv_r_get(op_tlv));
+}
+
+#define MLXSW_EMAD_TIMEOUT_MS 200
+
+static int __mlxsw_emad_transmit(struct mlxsw_core *mlxsw_core,
+ struct sk_buff *skb,
+ const struct mlxsw_tx_info *tx_info)
+{
+ int err;
+ int ret;
+
+ err = mlxsw_core_skb_transmit(mlxsw_core->driver_priv, skb, tx_info);
+ if (err) {
+ dev_warn(mlxsw_core->bus_info->dev, "Failed to transmit EMAD (tid=%llx)\n",
+ mlxsw_core->emad.tid);
+ dev_kfree_skb(skb);
+ return err;
+ }
+
+ mlxsw_core->emad.trans_active = true;
+ ret = wait_event_timeout(mlxsw_core->emad.wait,
+ !(mlxsw_core->emad.trans_active),
+ msecs_to_jiffies(MLXSW_EMAD_TIMEOUT_MS));
+ if (!ret) {
+ dev_warn(mlxsw_core->bus_info->dev, "EMAD timed-out (tid=%llx)\n",
+ mlxsw_core->emad.tid);
+ mlxsw_core->emad.trans_active = false;
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int mlxsw_emad_process_status(struct mlxsw_core *mlxsw_core,
+ char *op_tlv)
+{
+ enum mlxsw_emad_op_tlv_status status;
+ u64 tid;
+
+ status = mlxsw_emad_op_tlv_status_get(op_tlv);
+ tid = mlxsw_emad_op_tlv_tid_get(op_tlv);
+
+ switch (status) {
+ case MLXSW_EMAD_OP_TLV_STATUS_SUCCESS:
+ return 0;
+ case MLXSW_EMAD_OP_TLV_STATUS_BUSY:
+ case MLXSW_EMAD_OP_TLV_STATUS_MESSAGE_RECEIPT_ACK:
+ dev_warn(mlxsw_core->bus_info->dev, "Reg access status again (tid=%llx,status=%x(%s))\n",
+ tid, status, mlxsw_emad_op_tlv_status_str(status));
+ return -EAGAIN;
+ case MLXSW_EMAD_OP_TLV_STATUS_VERSION_NOT_SUPPORTED:
+ case MLXSW_EMAD_OP_TLV_STATUS_UNKNOWN_TLV:
+ case MLXSW_EMAD_OP_TLV_STATUS_REGISTER_NOT_SUPPORTED:
+ case MLXSW_EMAD_OP_TLV_STATUS_CLASS_NOT_SUPPORTED:
+ case MLXSW_EMAD_OP_TLV_STATUS_METHOD_NOT_SUPPORTED:
+ case MLXSW_EMAD_OP_TLV_STATUS_BAD_PARAMETER:
+ case MLXSW_EMAD_OP_TLV_STATUS_RESOURCE_NOT_AVAILABLE:
+ case MLXSW_EMAD_OP_TLV_STATUS_INTERNAL_ERROR:
+ default:
+ dev_err(mlxsw_core->bus_info->dev, "Reg access status failed (tid=%llx,status=%x(%s))\n",
+ tid, status, mlxsw_emad_op_tlv_status_str(status));
+ return -EIO;
+ }
+}
+
+static int mlxsw_emad_process_status_skb(struct mlxsw_core *mlxsw_core,
+ struct sk_buff *skb)
+{
+ return mlxsw_emad_process_status(mlxsw_core, mlxsw_emad_op_tlv(skb));
+}
+
+static int mlxsw_emad_transmit(struct mlxsw_core *mlxsw_core,
+ struct sk_buff *skb,
+ const struct mlxsw_tx_info *tx_info)
+{
+ struct sk_buff *trans_skb;
+ int n_retry;
+ int err;
+
+ n_retry = 0;
+retry:
+ /* We copy the EMAD to a new skb, since we might need
+ * to retransmit it in case of failure.
+ */
+ trans_skb = skb_copy(skb, GFP_KERNEL);
+ if (!trans_skb) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ err = __mlxsw_emad_transmit(mlxsw_core, trans_skb, tx_info);
+ if (!err) {
+ struct sk_buff *resp_skb = mlxsw_core->emad.resp_skb;
+
+ err = mlxsw_emad_process_status_skb(mlxsw_core, resp_skb);
+ if (err)
+ dev_kfree_skb(resp_skb);
+ if (!err || err != -EAGAIN)
+ goto out;
+ }
+ if (n_retry++ < MLXSW_EMAD_MAX_RETRY)
+ goto retry;
+
+out:
+ dev_kfree_skb(skb);
+ mlxsw_core->emad.tid++;
+ return err;
+}
+
+static void mlxsw_emad_rx_listener_func(struct sk_buff *skb, u8 local_port,
+ void *priv)
+{
+ struct mlxsw_core *mlxsw_core = priv;
+
+ if (mlxsw_emad_is_resp(skb) &&
+ mlxsw_core->emad.trans_active &&
+ mlxsw_emad_get_tid(skb) == mlxsw_core->emad.tid) {
+ mlxsw_core->emad.resp_skb = skb;
+ mlxsw_core->emad.trans_active = false;
+ wake_up(&mlxsw_core->emad.wait);
+ } else {
+ dev_kfree_skb(skb);
+ }
+}
+
+static const struct mlxsw_rx_listener mlxsw_emad_rx_listener = {
+ .func = mlxsw_emad_rx_listener_func,
+ .local_port = MLXSW_PORT_DONT_CARE,
+ .trap_id = MLXSW_TRAP_ID_ETHEMAD,
+};
+
+static int mlxsw_emad_traps_set(struct mlxsw_core *mlxsw_core)
+{
+ char htgt_pl[MLXSW_REG_HTGT_LEN];
+ char hpkt_pl[MLXSW_REG_HPKT_LEN];
+ int err;
+
+ mlxsw_reg_htgt_pack(htgt_pl, MLXSW_REG_HTGT_TRAP_GROUP_EMAD);
+ err = mlxsw_reg_write(mlxsw_core, MLXSW_REG(htgt), htgt_pl);
+ if (err)
+ return err;
+
+ mlxsw_reg_hpkt_pack(hpkt_pl, MLXSW_REG_HPKT_ACTION_TRAP_TO_CPU,
+ MLXSW_REG_HTGT_TRAP_GROUP_EMAD,
+ MLXSW_TRAP_ID_ETHEMAD);
+ return mlxsw_reg_write(mlxsw_core, MLXSW_REG(hpkt), hpkt_pl);
+}
+
+static int mlxsw_emad_init(struct mlxsw_core *mlxsw_core)
+{
+ int err;
+
+ /* Set the upper 32 bits of the transaction ID field to a random
+ * number. This allows us to discard EMADs addressed to other
+ * devices.
+ */
+ get_random_bytes(&mlxsw_core->emad.tid, 4);
+ mlxsw_core->emad.tid = mlxsw_core->emad.tid << 32;
+
+ init_waitqueue_head(&mlxsw_core->emad.wait);
+ mlxsw_core->emad.trans_active = false;
+ mutex_init(&mlxsw_core->emad.lock);
+
+ err = mlxsw_core_rx_listener_register(mlxsw_core,
+ &mlxsw_emad_rx_listener,
+ mlxsw_core);
+ if (err)
+ return err;
+
+ err = mlxsw_emad_traps_set(mlxsw_core);
+ if (err)
+ goto err_emad_trap_set;
+
+ mlxsw_core->emad.use_emad = true;
+
+ return 0;
+
+err_emad_trap_set:
+ mlxsw_core_rx_listener_unregister(mlxsw_core,
+ &mlxsw_emad_rx_listener,
+ mlxsw_core);
+ return err;
+}
+
+static void mlxsw_emad_fini(struct mlxsw_core *mlxsw_core)
+{
+ char hpkt_pl[MLXSW_REG_HPKT_LEN];
+
+ mlxsw_reg_hpkt_pack(hpkt_pl, MLXSW_REG_HPKT_ACTION_DISCARD,
+ MLXSW_REG_HTGT_TRAP_GROUP_EMAD,
+ MLXSW_TRAP_ID_ETHEMAD);
+ mlxsw_reg_write(mlxsw_core, MLXSW_REG(hpkt), hpkt_pl);
+
+ mlxsw_core_rx_listener_unregister(mlxsw_core,
+ &mlxsw_emad_rx_listener,
+ mlxsw_core);
+}
+
+static struct sk_buff *mlxsw_emad_alloc(const struct mlxsw_core *mlxsw_core,
+ u16 reg_len)
+{
+ struct sk_buff *skb;
+ u16 emad_len;
+
+ emad_len = (reg_len + sizeof(u32) + MLXSW_EMAD_ETH_HDR_LEN +
+ (MLXSW_EMAD_OP_TLV_LEN + MLXSW_EMAD_END_TLV_LEN) *
+ sizeof(u32) + mlxsw_core->driver->txhdr_len);
+ if (emad_len > MLXSW_EMAD_MAX_FRAME_LEN)
+ return NULL;
+
+ skb = netdev_alloc_skb(NULL, emad_len);
+ if (!skb)
+ return NULL;
+ memset(skb->data, 0, emad_len);
+ skb_reserve(skb, emad_len);
+
+ return skb;
+}
+
/*****************
* Core functions
*****************/
@@ -307,6 +798,7 @@
}
INIT_LIST_HEAD(&mlxsw_core->rx_listener_list);
+ INIT_LIST_HEAD(&mlxsw_core->event_listener_list);
mlxsw_core->driver = mlxsw_driver;
mlxsw_core->bus = mlxsw_bus;
mlxsw_core->bus_priv = bus_priv;
@@ -318,10 +810,15 @@
err = -ENOMEM;
goto err_alloc_stats;
}
+
err = mlxsw_bus->init(bus_priv, mlxsw_core, mlxsw_driver->profile);
if (err)
goto err_bus_init;
+ err = mlxsw_emad_init(mlxsw_core);
+ if (err)
+ goto err_emad_init;
+
err = mlxsw_driver->init(mlxsw_core->driver_priv, mlxsw_core,
mlxsw_bus_info);
if (err)
@@ -336,6 +833,8 @@
err_debugfs_init:
mlxsw_core->driver->fini(mlxsw_core->driver_priv);
err_driver_init:
+ mlxsw_emad_fini(mlxsw_core);
+err_emad_init:
mlxsw_bus->fini(bus_priv);
err_bus_init:
free_percpu(mlxsw_core->pcpu_stats);
@@ -353,6 +852,7 @@
mlxsw_core_debugfs_fini(mlxsw_core);
mlxsw_core->driver->fini(mlxsw_core->driver_priv);
+ mlxsw_emad_fini(mlxsw_core);
mlxsw_core->bus->fini(mlxsw_core->bus_priv);
free_percpu(mlxsw_core->pcpu_stats);
kfree(mlxsw_core);
@@ -433,6 +933,242 @@
}
EXPORT_SYMBOL(mlxsw_core_rx_listener_unregister);
+static void mlxsw_core_event_listener_func(struct sk_buff *skb, u8 local_port,
+ void *priv)
+{
+ struct mlxsw_event_listener_item *event_listener_item = priv;
+ struct mlxsw_reg_info reg;
+ char *payload;
+ char *op_tlv = mlxsw_emad_op_tlv(skb);
+ char *reg_tlv = mlxsw_emad_reg_tlv(skb);
+
+ reg.id = mlxsw_emad_op_tlv_register_id_get(op_tlv);
+ reg.len = (mlxsw_emad_reg_tlv_len_get(reg_tlv) - 1) * sizeof(u32);
+ payload = mlxsw_emad_reg_payload(op_tlv);
+ event_listener_item->el.func(®, payload, event_listener_item->priv);
+ dev_kfree_skb(skb);
+}
+
+static bool __is_event_listener_equal(const struct mlxsw_event_listener *el_a,
+ const struct mlxsw_event_listener *el_b)
+{
+ return (el_a->func == el_b->func &&
+ el_a->trap_id == el_b->trap_id);
+}
+
+static struct mlxsw_event_listener_item *
+__find_event_listener_item(struct mlxsw_core *mlxsw_core,
+ const struct mlxsw_event_listener *el,
+ void *priv)
+{
+ struct mlxsw_event_listener_item *el_item;
+
+ list_for_each_entry(el_item, &mlxsw_core->event_listener_list, list) {
+ if (__is_event_listener_equal(&el_item->el, el) &&
+ el_item->priv == priv)
+ return el_item;
+ }
+ return NULL;
+}
+
+int mlxsw_core_event_listener_register(struct mlxsw_core *mlxsw_core,
+ const struct mlxsw_event_listener *el,
+ void *priv)
+{
+ int err;
+ struct mlxsw_event_listener_item *el_item;
+ const struct mlxsw_rx_listener rxl = {
+ .func = mlxsw_core_event_listener_func,
+ .local_port = MLXSW_PORT_DONT_CARE,
+ .trap_id = el->trap_id,
+ };
+
+ el_item = __find_event_listener_item(mlxsw_core, el, priv);
+ if (el_item)
+ return -EEXIST;
+ el_item = kmalloc(sizeof(*el_item), GFP_KERNEL);
+ if (!el_item)
+ return -ENOMEM;
+ el_item->el = *el;
+ el_item->priv = priv;
+
+ err = mlxsw_core_rx_listener_register(mlxsw_core, &rxl, el_item);
+ if (err)
+ goto err_rx_listener_register;
+
+ /* No reason to save item if we did not manage to register an RX
+ * listener for it.
+ */
+ list_add_rcu(&el_item->list, &mlxsw_core->event_listener_list);
+
+ return 0;
+
+err_rx_listener_register:
+ kfree(el_item);
+ return err;
+}
+EXPORT_SYMBOL(mlxsw_core_event_listener_register);
+
+void mlxsw_core_event_listener_unregister(struct mlxsw_core *mlxsw_core,
+ const struct mlxsw_event_listener *el,
+ void *priv)
+{
+ struct mlxsw_event_listener_item *el_item;
+ const struct mlxsw_rx_listener rxl = {
+ .func = mlxsw_core_event_listener_func,
+ .local_port = MLXSW_PORT_DONT_CARE,
+ .trap_id = el->trap_id,
+ };
+
+ el_item = __find_event_listener_item(mlxsw_core, el, priv);
+ if (!el_item)
+ return;
+ mlxsw_core_rx_listener_unregister(mlxsw_core, &rxl, el_item);
+ list_del(&el_item->list);
+ kfree(el_item);
+}
+EXPORT_SYMBOL(mlxsw_core_event_listener_unregister);
+
+static int mlxsw_core_reg_access_emad(struct mlxsw_core *mlxsw_core,
+ const struct mlxsw_reg_info *reg,
+ char *payload,
+ enum mlxsw_core_reg_access_type type)
+{
+ int err;
+ char *op_tlv;
+ struct sk_buff *skb;
+ struct mlxsw_tx_info tx_info = {
+ .local_port = MLXSW_PORT_CPU_PORT,
+ .is_emad = true,
+ };
+
+ skb = mlxsw_emad_alloc(mlxsw_core, reg->len);
+ if (!skb)
+ return -ENOMEM;
+
+ mlxsw_emad_construct(skb, reg, payload, type, mlxsw_core);
+ mlxsw_core->driver->txhdr_construct(skb, &tx_info);
+
+ dev_dbg(mlxsw_core->bus_info->dev, "EMAD send (tid=%llx)\n",
+ mlxsw_core->emad.tid);
+ mlxsw_core_buf_dump_dbg(mlxsw_core, skb->data, skb->len);
+
+ err = mlxsw_emad_transmit(mlxsw_core, skb, &tx_info);
+ if (!err) {
+ op_tlv = mlxsw_emad_op_tlv(mlxsw_core->emad.resp_skb);
+ memcpy(payload, mlxsw_emad_reg_payload(op_tlv),
+ reg->len);
+
+ dev_dbg(mlxsw_core->bus_info->dev, "EMAD recv (tid=%llx)\n",
+ mlxsw_core->emad.tid - 1);
+ mlxsw_core_buf_dump_dbg(mlxsw_core,
+ mlxsw_core->emad.resp_skb->data,
+ skb->len);
+
+ dev_kfree_skb(mlxsw_core->emad.resp_skb);
+ }
+
+ return err;
+}
+
+static int mlxsw_core_reg_access_cmd(struct mlxsw_core *mlxsw_core,
+ const struct mlxsw_reg_info *reg,
+ char *payload,
+ enum mlxsw_core_reg_access_type type)
+{
+ int err, n_retry;
+ char *in_mbox, *out_mbox, *tmp;
+
+ in_mbox = mlxsw_cmd_mbox_alloc();
+ if (!in_mbox)
+ return -ENOMEM;
+
+ out_mbox = mlxsw_cmd_mbox_alloc();
+ if (!out_mbox) {
+ err = -ENOMEM;
+ goto free_in_mbox;
+ }
+
+ mlxsw_emad_pack_op_tlv(in_mbox, reg, type, mlxsw_core);
+ tmp = in_mbox + MLXSW_EMAD_OP_TLV_LEN * sizeof(u32);
+ mlxsw_emad_pack_reg_tlv(tmp, reg, payload);
+
+ n_retry = 0;
+retry:
+ err = mlxsw_cmd_access_reg(mlxsw_core, in_mbox, out_mbox);
+ if (!err) {
+ err = mlxsw_emad_process_status(mlxsw_core, out_mbox);
+ if (err == -EAGAIN && n_retry++ < MLXSW_EMAD_MAX_RETRY)
+ goto retry;
+ }
+
+ if (!err)
+ memcpy(payload, mlxsw_emad_reg_payload(out_mbox),
+ reg->len);
+
+ mlxsw_core->emad.tid++;
+ mlxsw_cmd_mbox_free(out_mbox);
+free_in_mbox:
+ mlxsw_cmd_mbox_free(in_mbox);
+ return err;
+}
+
+static int mlxsw_core_reg_access(struct mlxsw_core *mlxsw_core,
+ const struct mlxsw_reg_info *reg,
+ char *payload,
+ enum mlxsw_core_reg_access_type type)
+{
+ u64 cur_tid;
+ int err;
+
+ if (mutex_lock_interruptible(&mlxsw_core->emad.lock)) {
+ dev_err(mlxsw_core->bus_info->dev, "Reg access interrupted (reg_id=%x(%s),type=%s)\n",
+ reg->id, mlxsw_reg_id_str(reg->id),
+ mlxsw_core_reg_access_type_str(type));
+ return -EINTR;
+ }
+
+ cur_tid = mlxsw_core->emad.tid;
+ dev_dbg(mlxsw_core->bus_info->dev, "Reg access (tid=%llx,reg_id=%x(%s),type=%s)\n",
+ cur_tid, reg->id, mlxsw_reg_id_str(reg->id),
+ mlxsw_core_reg_access_type_str(type));
+
+ /* During initialization EMAD interface is not available to us,
+ * so we default to command interface. We switch to EMAD interface
+ * after setting the appropriate traps.
+ */
+ if (!mlxsw_core->emad.use_emad)
+ err = mlxsw_core_reg_access_cmd(mlxsw_core, reg,
+ payload, type);
+ else
+ err = mlxsw_core_reg_access_emad(mlxsw_core, reg,
+ payload, type);
+
+ if (err)
+ dev_err(mlxsw_core->bus_info->dev, "Reg access failed (tid=%llx,reg_id=%x(%s),type=%s)\n",
+ cur_tid, reg->id, mlxsw_reg_id_str(reg->id),
+ mlxsw_core_reg_access_type_str(type));
+
+ mutex_unlock(&mlxsw_core->emad.lock);
+ return err;
+}
+
+int mlxsw_reg_query(struct mlxsw_core *mlxsw_core,
+ const struct mlxsw_reg_info *reg, char *payload)
+{
+ return mlxsw_core_reg_access(mlxsw_core, reg, payload,
+ MLXSW_CORE_REG_ACCESS_TYPE_QUERY);
+}
+EXPORT_SYMBOL(mlxsw_reg_query);
+
+int mlxsw_reg_write(struct mlxsw_core *mlxsw_core,
+ const struct mlxsw_reg_info *reg, char *payload)
+{
+ return mlxsw_core_reg_access(mlxsw_core, reg, payload,
+ MLXSW_CORE_REG_ACCESS_TYPE_WRITE);
+}
+EXPORT_SYMBOL(mlxsw_reg_write);
+
void mlxsw_core_skb_receive(struct mlxsw_core *mlxsw_core, struct sk_buff *skb,
struct mlxsw_rx_info *rx_info)
{
diff --git a/drivers/net/ethernet/mellanox/mlxsw/core.h b/drivers/net/ethernet/mellanox/mlxsw/core.h
index f4ab36a..53ef20a 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/core.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/core.h
@@ -44,6 +44,9 @@
#include <linux/types.h>
#include <linux/skbuff.h>
+#include "trap.h"
+#include "reg.h"
+
#include "cmd.h"
#define MLXSW_MODULE_ALIAS_PREFIX "mlxsw-driver-"
@@ -77,6 +80,12 @@
u16 trap_id;
};
+struct mlxsw_event_listener {
+ void (*func)(const struct mlxsw_reg_info *reg,
+ char *payload, void *priv);
+ enum mlxsw_event_trap_id trap_id;
+};
+
int mlxsw_core_rx_listener_register(struct mlxsw_core *mlxsw_core,
const struct mlxsw_rx_listener *rxl,
void *priv);
@@ -84,6 +93,18 @@
const struct mlxsw_rx_listener *rxl,
void *priv);
+int mlxsw_core_event_listener_register(struct mlxsw_core *mlxsw_core,
+ const struct mlxsw_event_listener *el,
+ void *priv);
+void mlxsw_core_event_listener_unregister(struct mlxsw_core *mlxsw_core,
+ const struct mlxsw_event_listener *el,
+ void *priv);
+
+int mlxsw_reg_query(struct mlxsw_core *mlxsw_core,
+ const struct mlxsw_reg_info *reg, char *payload);
+int mlxsw_reg_write(struct mlxsw_core *mlxsw_core,
+ const struct mlxsw_reg_info *reg, char *payload);
+
struct mlxsw_rx_info {
u16 sys_port;
int trap_id;
diff --git a/drivers/net/ethernet/mellanox/mlxsw/emad.h b/drivers/net/ethernet/mellanox/mlxsw/emad.h
new file mode 100644
index 0000000..97b6bb5
--- /dev/null
+++ b/drivers/net/ethernet/mellanox/mlxsw/emad.h
@@ -0,0 +1,127 @@
+/*
+ * drivers/net/ethernet/mellanox/mlxsw/emad.h
+ * Copyright (c) 2015 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2015 Ido Schimmel <idosch@mellanox.com>
+ * Copyright (c) 2015 Jiri Pirko <jiri@mellanox.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the names of the copyright holders nor the names of its
+ * contributors may be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _MLXSW_EMAD_H
+#define _MLXSW_EMAD_H
+
+#define MLXSW_EMAD_MAX_FRAME_LEN 1518 /* Length in u8 */
+#define MLXSW_EMAD_MAX_RETRY 5
+
+/* EMAD Ethernet header */
+#define MLXSW_EMAD_ETH_HDR_LEN 0x10 /* Length in u8 */
+#define MLXSW_EMAD_EH_DMAC "\x01\x02\xc9\x00\x00\x01"
+#define MLXSW_EMAD_EH_SMAC "\x00\x02\xc9\x01\x02\x03"
+#define MLXSW_EMAD_EH_ETHERTYPE 0x8932
+#define MLXSW_EMAD_EH_MLX_PROTO 0
+#define MLXSW_EMAD_EH_PROTO_VERSION 0
+
+/* EMAD TLV Types */
+enum {
+ MLXSW_EMAD_TLV_TYPE_END,
+ MLXSW_EMAD_TLV_TYPE_OP,
+ MLXSW_EMAD_TLV_TYPE_DR,
+ MLXSW_EMAD_TLV_TYPE_REG,
+ MLXSW_EMAD_TLV_TYPE_USERDATA,
+ MLXSW_EMAD_TLV_TYPE_OOBETH,
+};
+
+/* OP TLV */
+#define MLXSW_EMAD_OP_TLV_LEN 4 /* Length in u32 */
+
+enum {
+ MLXSW_EMAD_OP_TLV_CLASS_REG_ACCESS = 1,
+ MLXSW_EMAD_OP_TLV_CLASS_IPC = 2,
+};
+
+enum mlxsw_emad_op_tlv_status {
+ MLXSW_EMAD_OP_TLV_STATUS_SUCCESS,
+ MLXSW_EMAD_OP_TLV_STATUS_BUSY,
+ MLXSW_EMAD_OP_TLV_STATUS_VERSION_NOT_SUPPORTED,
+ MLXSW_EMAD_OP_TLV_STATUS_UNKNOWN_TLV,
+ MLXSW_EMAD_OP_TLV_STATUS_REGISTER_NOT_SUPPORTED,
+ MLXSW_EMAD_OP_TLV_STATUS_CLASS_NOT_SUPPORTED,
+ MLXSW_EMAD_OP_TLV_STATUS_METHOD_NOT_SUPPORTED,
+ MLXSW_EMAD_OP_TLV_STATUS_BAD_PARAMETER,
+ MLXSW_EMAD_OP_TLV_STATUS_RESOURCE_NOT_AVAILABLE,
+ MLXSW_EMAD_OP_TLV_STATUS_MESSAGE_RECEIPT_ACK,
+ MLXSW_EMAD_OP_TLV_STATUS_INTERNAL_ERROR = 0x70,
+};
+
+static inline char *mlxsw_emad_op_tlv_status_str(u8 status)
+{
+ switch (status) {
+ case MLXSW_EMAD_OP_TLV_STATUS_SUCCESS:
+ return "operation performed";
+ case MLXSW_EMAD_OP_TLV_STATUS_BUSY:
+ return "device is busy";
+ case MLXSW_EMAD_OP_TLV_STATUS_VERSION_NOT_SUPPORTED:
+ return "version not supported";
+ case MLXSW_EMAD_OP_TLV_STATUS_UNKNOWN_TLV:
+ return "unknown TLV";
+ case MLXSW_EMAD_OP_TLV_STATUS_REGISTER_NOT_SUPPORTED:
+ return "register not supported";
+ case MLXSW_EMAD_OP_TLV_STATUS_CLASS_NOT_SUPPORTED:
+ return "class not supported";
+ case MLXSW_EMAD_OP_TLV_STATUS_METHOD_NOT_SUPPORTED:
+ return "method not supported";
+ case MLXSW_EMAD_OP_TLV_STATUS_BAD_PARAMETER:
+ return "bad parameter";
+ case MLXSW_EMAD_OP_TLV_STATUS_RESOURCE_NOT_AVAILABLE:
+ return "resource not available";
+ case MLXSW_EMAD_OP_TLV_STATUS_MESSAGE_RECEIPT_ACK:
+ return "acknowledged. retransmit";
+ case MLXSW_EMAD_OP_TLV_STATUS_INTERNAL_ERROR:
+ return "internal error";
+ default:
+ return "*UNKNOWN*";
+ }
+}
+
+enum {
+ MLXSW_EMAD_OP_TLV_REQUEST,
+ MLXSW_EMAD_OP_TLV_RESPONSE
+};
+
+enum {
+ MLXSW_EMAD_OP_TLV_METHOD_QUERY = 1,
+ MLXSW_EMAD_OP_TLV_METHOD_WRITE = 2,
+ MLXSW_EMAD_OP_TLV_METHOD_SEND = 3,
+ MLXSW_EMAD_OP_TLV_METHOD_EVENT = 5,
+};
+
+/* END TLV */
+#define MLXSW_EMAD_END_TLV_LEN 1 /* Length in u32 */
+
+#endif
diff --git a/drivers/net/ethernet/mellanox/mlxsw/port.h b/drivers/net/ethernet/mellanox/mlxsw/port.h
index 1b43c7d..4606966 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/port.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/port.h
@@ -42,6 +42,12 @@
#define MLXSW_PORT_DEFAULT_VID 1
+#define MLXSW_PORT_SWID_DISABLED_PORT 255
+#define MLXSW_PORT_SWID_ALL_SWIDS 254
+#define MLXSW_PORT_SWID_TYPE_ETH 2
+
+#define MLXSW_PORT_MID 0xd000
+
#define MLXSW_PORT_MAX_PHY_PORTS 0x40
#define MLXSW_PORT_MAX_PORTS MLXSW_PORT_MAX_PHY_PORTS
@@ -49,4 +55,17 @@
#define MLXSW_PORT_DONT_CARE (MLXSW_PORT_MAX_PORTS)
+enum mlxsw_port_admin_status {
+ MLXSW_PORT_ADMIN_STATUS_UP = 1,
+ MLXSW_PORT_ADMIN_STATUS_DOWN = 2,
+ MLXSW_PORT_ADMIN_STATUS_UP_ONCE = 3,
+ MLXSW_PORT_ADMIN_STATUS_DISABLED = 4,
+};
+
+enum mlxsw_reg_pude_oper_status {
+ MLXSW_PORT_OPER_STATUS_UP = 1,
+ MLXSW_PORT_OPER_STATUS_DOWN = 2,
+ MLXSW_PORT_OPER_STATUS_FAILURE = 4, /* Can be set to up again. */
+};
+
#endif /* _MLXSW_PORT_H */
diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h
new file mode 100644
index 0000000..b5a72f8
--- /dev/null
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -0,0 +1,1289 @@
+/*
+ * drivers/net/ethernet/mellanox/mlxsw/reg.h
+ * Copyright (c) 2015 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2015 Ido Schimmel <idosch@mellanox.com>
+ * Copyright (c) 2015 Elad Raz <eladr@mellanox.com>
+ * Copyright (c) 2015 Jiri Pirko <jiri@mellanox.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the names of the copyright holders nor the names of its
+ * contributors may be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _MLXSW_REG_H
+#define _MLXSW_REG_H
+
+#include <linux/string.h>
+#include <linux/bitops.h>
+#include <linux/if_vlan.h>
+
+#include "item.h"
+#include "port.h"
+
+struct mlxsw_reg_info {
+ u16 id;
+ u16 len; /* In u8 */
+};
+
+#define MLXSW_REG(type) (&mlxsw_reg_##type)
+#define MLXSW_REG_LEN(type) MLXSW_REG(type)->len
+#define MLXSW_REG_ZERO(type, payload) memset(payload, 0, MLXSW_REG(type)->len)
+
+/* SGCR - Switch General Configuration Register
+ * --------------------------------------------
+ * This register is used for configuration of the switch capabilities.
+ */
+#define MLXSW_REG_SGCR_ID 0x2000
+#define MLXSW_REG_SGCR_LEN 0x10
+
+static const struct mlxsw_reg_info mlxsw_reg_sgcr = {
+ .id = MLXSW_REG_SGCR_ID,
+ .len = MLXSW_REG_SGCR_LEN,
+};
+
+/* reg_sgcr_llb
+ * Link Local Broadcast (Default=0)
+ * When set, all Link Local packets (224.0.0.X) will be treated as broadcast
+ * packets and ignore the IGMP snooping entries.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, sgcr, llb, 0x04, 0, 1);
+
+static inline void mlxsw_reg_sgcr_pack(char *payload, bool llb)
+{
+ MLXSW_REG_ZERO(sgcr, payload);
+ mlxsw_reg_sgcr_llb_set(payload, !!llb);
+}
+
+/* SPAD - Switch Physical Address Register
+ * ---------------------------------------
+ * The SPAD register configures the switch physical MAC address.
+ */
+#define MLXSW_REG_SPAD_ID 0x2002
+#define MLXSW_REG_SPAD_LEN 0x10
+
+static const struct mlxsw_reg_info mlxsw_reg_spad = {
+ .id = MLXSW_REG_SPAD_ID,
+ .len = MLXSW_REG_SPAD_LEN,
+};
+
+/* reg_spad_base_mac
+ * Base MAC address for the switch partitions.
+ * Per switch partition MAC address is equal to:
+ * base_mac + swid
+ * Access: RW
+ */
+MLXSW_ITEM_BUF(reg, spad, base_mac, 0x02, 6);
+
+/* SMID - Switch Multicast ID
+ * --------------------------
+ * In multi-chip configuration, each device should maintain mapping between
+ * Multicast ID (MID) into a list of local ports. This mapping is used in all
+ * the devices other than the ingress device, and is implemented as part of the
+ * FDB. The MID record maps from a MID, which is a unique identi- fier of the
+ * multicast group within the stacking domain, into a list of local ports into
+ * which the packet is replicated.
+ */
+#define MLXSW_REG_SMID_ID 0x2007
+#define MLXSW_REG_SMID_LEN 0x420
+
+static const struct mlxsw_reg_info mlxsw_reg_smid = {
+ .id = MLXSW_REG_SMID_ID,
+ .len = MLXSW_REG_SMID_LEN,
+};
+
+/* reg_smid_swid
+ * Switch partition ID.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, smid, swid, 0x00, 24, 8);
+
+/* reg_smid_mid
+ * Multicast identifier - global identifier that represents the multicast group
+ * across all devices
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, smid, mid, 0x00, 0, 16);
+
+/* reg_smid_port
+ * Local port memebership (1 bit per port).
+ * Access: RW
+ */
+MLXSW_ITEM_BIT_ARRAY(reg, smid, port, 0x20, 0x20, 1);
+
+/* reg_smid_port_mask
+ * Local port mask (1 bit per port).
+ * Access: W
+ */
+MLXSW_ITEM_BIT_ARRAY(reg, smid, port_mask, 0x220, 0x20, 1);
+
+static inline void mlxsw_reg_smid_pack(char *payload, u16 mid)
+{
+ MLXSW_REG_ZERO(smid, payload);
+ mlxsw_reg_smid_swid_set(payload, 0);
+ mlxsw_reg_smid_mid_set(payload, mid);
+ mlxsw_reg_smid_port_set(payload, MLXSW_PORT_CPU_PORT, 1);
+ mlxsw_reg_smid_port_mask_set(payload, MLXSW_PORT_CPU_PORT, 1);
+}
+
+/* SPMS - Switch Port MSTP/RSTP State Register
+ * -------------------------------------------
+ * Configures the spanning tree state of a physical port.
+ */
+#define MLXSW_REG_SPMS_ID 0x200d
+#define MLXSW_REG_SPMS_LEN 0x404
+
+static const struct mlxsw_reg_info mlxsw_reg_spms = {
+ .id = MLXSW_REG_SPMS_ID,
+ .len = MLXSW_REG_SPMS_LEN,
+};
+
+/* reg_spms_local_port
+ * Local port number.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, spms, local_port, 0x00, 16, 8);
+
+enum mlxsw_reg_spms_state {
+ MLXSW_REG_SPMS_STATE_NO_CHANGE,
+ MLXSW_REG_SPMS_STATE_DISCARDING,
+ MLXSW_REG_SPMS_STATE_LEARNING,
+ MLXSW_REG_SPMS_STATE_FORWARDING,
+};
+
+/* reg_spms_state
+ * Spanning tree state of each VLAN ID (VID) of the local port.
+ * 0 - Do not change spanning tree state (used only when writing).
+ * 1 - Discarding. No learning or forwarding to/from this port (default).
+ * 2 - Learning. Port is learning, but not forwarding.
+ * 3 - Forwarding. Port is learning and forwarding.
+ * Access: RW
+ */
+MLXSW_ITEM_BIT_ARRAY(reg, spms, state, 0x04, 0x400, 2);
+
+static inline void mlxsw_reg_spms_pack(char *payload, u8 local_port, u16 vid,
+ enum mlxsw_reg_spms_state state)
+{
+ MLXSW_REG_ZERO(spms, payload);
+ mlxsw_reg_spms_local_port_set(payload, local_port);
+ mlxsw_reg_spms_state_set(payload, vid, state);
+}
+
+/* SFGC - Switch Flooding Group Configuration
+ * ------------------------------------------
+ * The following register controls the association of flooding tables and MIDs
+ * to packet types used for flooding.
+ */
+#define MLXSW_REG_SFGC_ID 0x2011
+#define MLXSW_REG_SFGC_LEN 0x10
+
+static const struct mlxsw_reg_info mlxsw_reg_sfgc = {
+ .id = MLXSW_REG_SFGC_ID,
+ .len = MLXSW_REG_SFGC_LEN,
+};
+
+enum mlxsw_reg_sfgc_type {
+ MLXSW_REG_SFGC_TYPE_BROADCAST = 0,
+ MLXSW_REG_SFGC_TYPE_UNKNOWN_UNICAST = 1,
+ MLXSW_REG_SFGC_TYPE_UNREGISTERED_MULTICAST_IPV4 = 2,
+ MLXSW_REG_SFGC_TYPE_UNREGISTERED_MULTICAST_IPV6 = 3,
+ MLXSW_REG_SFGC_TYPE_UNREGISTERED_MULTICAST_NON_IP = 5,
+ MLXSW_REG_SFGC_TYPE_IPV4_LINK_LOCAL = 6,
+ MLXSW_REG_SFGC_TYPE_IPV6_ALL_HOST = 7,
+};
+
+/* reg_sfgc_type
+ * The traffic type to reach the flooding table.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, sfgc, type, 0x00, 0, 4);
+
+enum mlxsw_reg_sfgc_bridge_type {
+ MLXSW_REG_SFGC_BRIDGE_TYPE_1Q_FID = 0,
+ MLXSW_REG_SFGC_BRIDGE_TYPE_VFID = 1,
+};
+
+/* reg_sfgc_bridge_type
+ * Access: Index
+ *
+ * Note: SwitchX-2 only supports 802.1Q mode.
+ */
+MLXSW_ITEM32(reg, sfgc, bridge_type, 0x04, 24, 3);
+
+enum mlxsw_flood_table_type {
+ MLXSW_REG_SFGC_TABLE_TYPE_VID = 1,
+ MLXSW_REG_SFGC_TABLE_TYPE_SINGLE = 2,
+ MLXSW_REG_SFGC_TABLE_TYPE_ANY = 0,
+ MLXSW_REG_SFGC_TABLE_TYPE_FID_OFFEST = 3,
+ MLXSW_REG_SFGC_TABLE_TYPE_FID = 4,
+};
+
+/* reg_sfgc_table_type
+ * See mlxsw_flood_table_type
+ * Access: RW
+ *
+ * Note: FID offset and FID types are not supported in SwitchX-2.
+ */
+MLXSW_ITEM32(reg, sfgc, table_type, 0x04, 16, 3);
+
+/* reg_sfgc_flood_table
+ * Flooding table index to associate with the specific type on the specific
+ * switch partition.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, sfgc, flood_table, 0x04, 0, 6);
+
+/* reg_sfgc_mid
+ * The multicast ID for the swid. Not supported for Spectrum
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, sfgc, mid, 0x08, 0, 16);
+
+/* reg_sfgc_counter_set_type
+ * Counter Set Type for flow counters.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, sfgc, counter_set_type, 0x0C, 24, 8);
+
+/* reg_sfgc_counter_index
+ * Counter Index for flow counters.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, sfgc, counter_index, 0x0C, 0, 24);
+
+static inline void
+mlxsw_reg_sfgc_pack(char *payload, enum mlxsw_reg_sfgc_type type,
+ enum mlxsw_reg_sfgc_bridge_type bridge_type,
+ enum mlxsw_flood_table_type table_type,
+ unsigned int flood_table)
+{
+ MLXSW_REG_ZERO(sfgc, payload);
+ mlxsw_reg_sfgc_type_set(payload, type);
+ mlxsw_reg_sfgc_bridge_type_set(payload, bridge_type);
+ mlxsw_reg_sfgc_table_type_set(payload, table_type);
+ mlxsw_reg_sfgc_flood_table_set(payload, flood_table);
+ mlxsw_reg_sfgc_mid_set(payload, MLXSW_PORT_MID);
+}
+
+/* SFTR - Switch Flooding Table Register
+ * -------------------------------------
+ * The switch flooding table is used for flooding packet replication. The table
+ * defines a bit mask of ports for packet replication.
+ */
+#define MLXSW_REG_SFTR_ID 0x2012
+#define MLXSW_REG_SFTR_LEN 0x420
+
+static const struct mlxsw_reg_info mlxsw_reg_sftr = {
+ .id = MLXSW_REG_SFTR_ID,
+ .len = MLXSW_REG_SFTR_LEN,
+};
+
+/* reg_sftr_swid
+ * Switch partition ID with which to associate the port.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, sftr, swid, 0x00, 24, 8);
+
+/* reg_sftr_flood_table
+ * Flooding table index to associate with the specific type on the specific
+ * switch partition.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, sftr, flood_table, 0x00, 16, 6);
+
+/* reg_sftr_index
+ * Index. Used as an index into the Flooding Table in case the table is
+ * configured to use VID / FID or FID Offset.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, sftr, index, 0x00, 0, 16);
+
+/* reg_sftr_table_type
+ * See mlxsw_flood_table_type
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, sftr, table_type, 0x04, 16, 3);
+
+/* reg_sftr_range
+ * Range of entries to update
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, sftr, range, 0x04, 0, 16);
+
+/* reg_sftr_port
+ * Local port membership (1 bit per port).
+ * Access: RW
+ */
+MLXSW_ITEM_BIT_ARRAY(reg, sftr, port, 0x20, 0x20, 1);
+
+/* reg_sftr_cpu_port_mask
+ * CPU port mask (1 bit per port).
+ * Access: W
+ */
+MLXSW_ITEM_BIT_ARRAY(reg, sftr, port_mask, 0x220, 0x20, 1);
+
+static inline void mlxsw_reg_sftr_pack(char *payload,
+ unsigned int flood_table,
+ unsigned int index,
+ enum mlxsw_flood_table_type table_type,
+ unsigned int range)
+{
+ MLXSW_REG_ZERO(sftr, payload);
+ mlxsw_reg_sftr_swid_set(payload, 0);
+ mlxsw_reg_sftr_flood_table_set(payload, flood_table);
+ mlxsw_reg_sftr_index_set(payload, index);
+ mlxsw_reg_sftr_table_type_set(payload, table_type);
+ mlxsw_reg_sftr_range_set(payload, range);
+ mlxsw_reg_sftr_port_set(payload, MLXSW_PORT_CPU_PORT, 1);
+ mlxsw_reg_sftr_port_mask_set(payload, MLXSW_PORT_CPU_PORT, 1);
+}
+
+/* SPMLR - Switch Port MAC Learning Register
+ * -----------------------------------------
+ * Controls the Switch MAC learning policy per port.
+ */
+#define MLXSW_REG_SPMLR_ID 0x2018
+#define MLXSW_REG_SPMLR_LEN 0x8
+
+static const struct mlxsw_reg_info mlxsw_reg_spmlr = {
+ .id = MLXSW_REG_SPMLR_ID,
+ .len = MLXSW_REG_SPMLR_LEN,
+};
+
+/* reg_spmlr_local_port
+ * Local port number.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, spmlr, local_port, 0x00, 16, 8);
+
+/* reg_spmlr_sub_port
+ * Virtual port within the physical port.
+ * Should be set to 0 when virtual ports are not enabled on the port.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, spmlr, sub_port, 0x00, 8, 8);
+
+enum mlxsw_reg_spmlr_learn_mode {
+ MLXSW_REG_SPMLR_LEARN_MODE_DISABLE = 0,
+ MLXSW_REG_SPMLR_LEARN_MODE_ENABLE = 2,
+ MLXSW_REG_SPMLR_LEARN_MODE_SEC = 3,
+};
+
+/* reg_spmlr_learn_mode
+ * Learning mode on the port.
+ * 0 - Learning disabled.
+ * 2 - Learning enabled.
+ * 3 - Security mode.
+ *
+ * In security mode the switch does not learn MACs on the port, but uses the
+ * SMAC to see if it exists on another ingress port. If so, the packet is
+ * classified as a bad packet and is discarded unless the software registers
+ * to receive port security error packets usign HPKT.
+ */
+MLXSW_ITEM32(reg, spmlr, learn_mode, 0x04, 30, 2);
+
+static inline void mlxsw_reg_spmlr_pack(char *payload, u8 local_port,
+ enum mlxsw_reg_spmlr_learn_mode mode)
+{
+ MLXSW_REG_ZERO(spmlr, payload);
+ mlxsw_reg_spmlr_local_port_set(payload, local_port);
+ mlxsw_reg_spmlr_sub_port_set(payload, 0);
+ mlxsw_reg_spmlr_learn_mode_set(payload, mode);
+}
+
+/* PMLP - Ports Module to Local Port Register
+ * ------------------------------------------
+ * Configures the assignment of modules to local ports.
+ */
+#define MLXSW_REG_PMLP_ID 0x5002
+#define MLXSW_REG_PMLP_LEN 0x40
+
+static const struct mlxsw_reg_info mlxsw_reg_pmlp = {
+ .id = MLXSW_REG_PMLP_ID,
+ .len = MLXSW_REG_PMLP_LEN,
+};
+
+/* reg_pmlp_rxtx
+ * 0 - Tx value is used for both Tx and Rx.
+ * 1 - Rx value is taken from a separte field.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, pmlp, rxtx, 0x00, 31, 1);
+
+/* reg_pmlp_local_port
+ * Local port number.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, pmlp, local_port, 0x00, 16, 8);
+
+/* reg_pmlp_width
+ * 0 - Unmap local port.
+ * 1 - Lane 0 is used.
+ * 2 - Lanes 0 and 1 are used.
+ * 4 - Lanes 0, 1, 2 and 3 are used.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, pmlp, width, 0x00, 0, 8);
+
+/* reg_pmlp_module
+ * Module number.
+ * Access: RW
+ */
+MLXSW_ITEM32_INDEXED(reg, pmlp, module, 0x04, 0, 8, 0x04, 0, false);
+
+/* reg_pmlp_tx_lane
+ * Tx Lane. When rxtx field is cleared, this field is used for Rx as well.
+ * Access: RW
+ */
+MLXSW_ITEM32_INDEXED(reg, pmlp, tx_lane, 0x04, 16, 2, 0x04, 16, false);
+
+/* reg_pmlp_rx_lane
+ * Rx Lane. When rxtx field is cleared, this field is ignored and Rx lane is
+ * equal to Tx lane.
+ * Access: RW
+ */
+MLXSW_ITEM32_INDEXED(reg, pmlp, rx_lane, 0x04, 24, 2, 0x04, 24, false);
+
+static inline void mlxsw_reg_pmlp_pack(char *payload, u8 local_port)
+{
+ MLXSW_REG_ZERO(pmlp, payload);
+ mlxsw_reg_pmlp_local_port_set(payload, local_port);
+}
+
+/* PMTU - Port MTU Register
+ * ------------------------
+ * Configures and reports the port MTU.
+ */
+#define MLXSW_REG_PMTU_ID 0x5003
+#define MLXSW_REG_PMTU_LEN 0x10
+
+static const struct mlxsw_reg_info mlxsw_reg_pmtu = {
+ .id = MLXSW_REG_PMTU_ID,
+ .len = MLXSW_REG_PMTU_LEN,
+};
+
+/* reg_pmtu_local_port
+ * Local port number.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, pmtu, local_port, 0x00, 16, 8);
+
+/* reg_pmtu_max_mtu
+ * Maximum MTU.
+ * When port type (e.g. Ethernet) is configured, the relevant MTU is
+ * reported, otherwise the minimum between the max_mtu of the different
+ * types is reported.
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, pmtu, max_mtu, 0x04, 16, 16);
+
+/* reg_pmtu_admin_mtu
+ * MTU value to set port to. Must be smaller or equal to max_mtu.
+ * Note: If port type is Infiniband, then port must be disabled, when its
+ * MTU is set.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, pmtu, admin_mtu, 0x08, 16, 16);
+
+/* reg_pmtu_oper_mtu
+ * The actual MTU configured on the port. Packets exceeding this size
+ * will be dropped.
+ * Note: In Ethernet and FC oper_mtu == admin_mtu, however, in Infiniband
+ * oper_mtu might be smaller than admin_mtu.
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, pmtu, oper_mtu, 0x0C, 16, 16);
+
+static inline void mlxsw_reg_pmtu_pack(char *payload, u8 local_port,
+ u16 new_mtu)
+{
+ MLXSW_REG_ZERO(pmtu, payload);
+ mlxsw_reg_pmtu_local_port_set(payload, local_port);
+ mlxsw_reg_pmtu_max_mtu_set(payload, 0);
+ mlxsw_reg_pmtu_admin_mtu_set(payload, new_mtu);
+ mlxsw_reg_pmtu_oper_mtu_set(payload, 0);
+}
+
+/* PTYS - Port Type and Speed Register
+ * -----------------------------------
+ * Configures and reports the port speed type.
+ *
+ * Note: When set while the link is up, the changes will not take effect
+ * until the port transitions from down to up state.
+ */
+#define MLXSW_REG_PTYS_ID 0x5004
+#define MLXSW_REG_PTYS_LEN 0x40
+
+static const struct mlxsw_reg_info mlxsw_reg_ptys = {
+ .id = MLXSW_REG_PTYS_ID,
+ .len = MLXSW_REG_PTYS_LEN,
+};
+
+/* reg_ptys_local_port
+ * Local port number.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, ptys, local_port, 0x00, 16, 8);
+
+#define MLXSW_REG_PTYS_PROTO_MASK_ETH BIT(2)
+
+/* reg_ptys_proto_mask
+ * Protocol mask. Indicates which protocol is used.
+ * 0 - Infiniband.
+ * 1 - Fibre Channel.
+ * 2 - Ethernet.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, ptys, proto_mask, 0x00, 0, 3);
+
+#define MLXSW_REG_PTYS_ETH_SPEED_SGMII BIT(0)
+#define MLXSW_REG_PTYS_ETH_SPEED_1000BASE_KX BIT(1)
+#define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_CX4 BIT(2)
+#define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_KX4 BIT(3)
+#define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_KR BIT(4)
+#define MLXSW_REG_PTYS_ETH_SPEED_20GBASE_KR2 BIT(5)
+#define MLXSW_REG_PTYS_ETH_SPEED_40GBASE_CR4 BIT(6)
+#define MLXSW_REG_PTYS_ETH_SPEED_40GBASE_KR4 BIT(7)
+#define MLXSW_REG_PTYS_ETH_SPEED_56GBASE_R4 BIT(8)
+#define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_CR BIT(12)
+#define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_SR BIT(13)
+#define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_ER_LR BIT(14)
+#define MLXSW_REG_PTYS_ETH_SPEED_40GBASE_SR4 BIT(15)
+#define MLXSW_REG_PTYS_ETH_SPEED_40GBASE_LR4_ER4 BIT(16)
+#define MLXSW_REG_PTYS_ETH_SPEED_50GBASE_KR4 BIT(19)
+#define MLXSW_REG_PTYS_ETH_SPEED_100GBASE_CR4 BIT(20)
+#define MLXSW_REG_PTYS_ETH_SPEED_100GBASE_SR4 BIT(21)
+#define MLXSW_REG_PTYS_ETH_SPEED_100GBASE_KR4 BIT(22)
+#define MLXSW_REG_PTYS_ETH_SPEED_100GBASE_LR4_ER4 BIT(23)
+#define MLXSW_REG_PTYS_ETH_SPEED_100BASE_TX BIT(24)
+#define MLXSW_REG_PTYS_ETH_SPEED_100BASE_T BIT(25)
+#define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_T BIT(26)
+#define MLXSW_REG_PTYS_ETH_SPEED_25GBASE_CR BIT(27)
+#define MLXSW_REG_PTYS_ETH_SPEED_25GBASE_KR BIT(28)
+#define MLXSW_REG_PTYS_ETH_SPEED_25GBASE_SR BIT(29)
+#define MLXSW_REG_PTYS_ETH_SPEED_50GBASE_CR2 BIT(30)
+#define MLXSW_REG_PTYS_ETH_SPEED_50GBASE_KR2 BIT(31)
+
+/* reg_ptys_eth_proto_cap
+ * Ethernet port supported speeds and protocols.
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, ptys, eth_proto_cap, 0x0C, 0, 32);
+
+/* reg_ptys_eth_proto_admin
+ * Speed and protocol to set port to.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, ptys, eth_proto_admin, 0x18, 0, 32);
+
+/* reg_ptys_eth_proto_oper
+ * The current speed and protocol configured for the port.
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, ptys, eth_proto_oper, 0x24, 0, 32);
+
+static inline void mlxsw_reg_ptys_pack(char *payload, u8 local_port,
+ u32 proto_admin)
+{
+ MLXSW_REG_ZERO(ptys, payload);
+ mlxsw_reg_ptys_local_port_set(payload, local_port);
+ mlxsw_reg_ptys_proto_mask_set(payload, MLXSW_REG_PTYS_PROTO_MASK_ETH);
+ mlxsw_reg_ptys_eth_proto_admin_set(payload, proto_admin);
+}
+
+static inline void mlxsw_reg_ptys_unpack(char *payload, u32 *p_eth_proto_cap,
+ u32 *p_eth_proto_adm,
+ u32 *p_eth_proto_oper)
+{
+ if (p_eth_proto_cap)
+ *p_eth_proto_cap = mlxsw_reg_ptys_eth_proto_cap_get(payload);
+ if (p_eth_proto_adm)
+ *p_eth_proto_adm = mlxsw_reg_ptys_eth_proto_admin_get(payload);
+ if (p_eth_proto_oper)
+ *p_eth_proto_oper = mlxsw_reg_ptys_eth_proto_oper_get(payload);
+}
+
+/* PPAD - Port Physical Address Register
+ * -------------------------------------
+ * The PPAD register configures the per port physical MAC address.
+ */
+#define MLXSW_REG_PPAD_ID 0x5005
+#define MLXSW_REG_PPAD_LEN 0x10
+
+static const struct mlxsw_reg_info mlxsw_reg_ppad = {
+ .id = MLXSW_REG_PPAD_ID,
+ .len = MLXSW_REG_PPAD_LEN,
+};
+
+/* reg_ppad_single_base_mac
+ * 0: base_mac, local port should be 0 and mac[7:0] is
+ * reserved. HW will set incremental
+ * 1: single_mac - mac of the local_port
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, ppad, single_base_mac, 0x00, 28, 1);
+
+/* reg_ppad_local_port
+ * port number, if single_base_mac = 0 then local_port is reserved
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, ppad, local_port, 0x00, 16, 8);
+
+/* reg_ppad_mac
+ * If single_base_mac = 0 - base MAC address, mac[7:0] is reserved.
+ * If single_base_mac = 1 - the per port MAC address
+ * Access: RW
+ */
+MLXSW_ITEM_BUF(reg, ppad, mac, 0x02, 6);
+
+static inline void mlxsw_reg_ppad_pack(char *payload, bool single_base_mac,
+ u8 local_port)
+{
+ MLXSW_REG_ZERO(ppad, payload);
+ mlxsw_reg_ppad_single_base_mac_set(payload, !!single_base_mac);
+ mlxsw_reg_ppad_local_port_set(payload, local_port);
+}
+
+/* PAOS - Ports Administrative and Operational Status Register
+ * -----------------------------------------------------------
+ * Configures and retrieves per port administrative and operational status.
+ */
+#define MLXSW_REG_PAOS_ID 0x5006
+#define MLXSW_REG_PAOS_LEN 0x10
+
+static const struct mlxsw_reg_info mlxsw_reg_paos = {
+ .id = MLXSW_REG_PAOS_ID,
+ .len = MLXSW_REG_PAOS_LEN,
+};
+
+/* reg_paos_swid
+ * Switch partition ID with which to associate the port.
+ * Note: while external ports uses unique local port numbers (and thus swid is
+ * redundant), router ports use the same local port number where swid is the
+ * only indication for the relevant port.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, paos, swid, 0x00, 24, 8);
+
+/* reg_paos_local_port
+ * Local port number.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, paos, local_port, 0x00, 16, 8);
+
+/* reg_paos_admin_status
+ * Port administrative state (the desired state of the port):
+ * 1 - Up.
+ * 2 - Down.
+ * 3 - Up once. This means that in case of link failure, the port won't go
+ * into polling mode, but will wait to be re-enabled by software.
+ * 4 - Disabled by system. Can only be set by hardware.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, paos, admin_status, 0x00, 8, 4);
+
+/* reg_paos_oper_status
+ * Port operational state (the current state):
+ * 1 - Up.
+ * 2 - Down.
+ * 3 - Down by port failure. This means that the device will not let the
+ * port up again until explicitly specified by software.
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, paos, oper_status, 0x00, 0, 4);
+
+/* reg_paos_ase
+ * Admin state update enabled.
+ * Access: WO
+ */
+MLXSW_ITEM32(reg, paos, ase, 0x04, 31, 1);
+
+/* reg_paos_ee
+ * Event update enable. If this bit is set, event generation will be
+ * updated based on the e field.
+ * Access: WO
+ */
+MLXSW_ITEM32(reg, paos, ee, 0x04, 30, 1);
+
+/* reg_paos_e
+ * Event generation on operational state change:
+ * 0 - Do not generate event.
+ * 1 - Generate Event.
+ * 2 - Generate Single Event.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, paos, e, 0x04, 0, 2);
+
+static inline void mlxsw_reg_paos_pack(char *payload, u8 local_port,
+ enum mlxsw_port_admin_status status)
+{
+ MLXSW_REG_ZERO(paos, payload);
+ mlxsw_reg_paos_swid_set(payload, 0);
+ mlxsw_reg_paos_local_port_set(payload, local_port);
+ mlxsw_reg_paos_admin_status_set(payload, status);
+ mlxsw_reg_paos_oper_status_set(payload, 0);
+ mlxsw_reg_paos_ase_set(payload, 1);
+ mlxsw_reg_paos_ee_set(payload, 1);
+ mlxsw_reg_paos_e_set(payload, 1);
+}
+
+/* PPCNT - Ports Performance Counters Register
+ * -------------------------------------------
+ * The PPCNT register retrieves per port performance counters.
+ */
+#define MLXSW_REG_PPCNT_ID 0x5008
+#define MLXSW_REG_PPCNT_LEN 0x100
+
+static const struct mlxsw_reg_info mlxsw_reg_ppcnt = {
+ .id = MLXSW_REG_PPCNT_ID,
+ .len = MLXSW_REG_PPCNT_LEN,
+};
+
+/* reg_ppcnt_swid
+ * For HCA: must be always 0.
+ * Switch partition ID to associate port with.
+ * Switch partitions are numbered from 0 to 7 inclusively.
+ * Switch partition 254 indicates stacking ports.
+ * Switch partition 255 indicates all switch partitions.
+ * Only valid on Set() operation with local_port=255.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, ppcnt, swid, 0x00, 24, 8);
+
+/* reg_ppcnt_local_port
+ * Local port number.
+ * 255 indicates all ports on the device, and is only allowed
+ * for Set() operation.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, ppcnt, local_port, 0x00, 16, 8);
+
+/* reg_ppcnt_pnat
+ * Port number access type:
+ * 0 - Local port number
+ * 1 - IB port number
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, ppcnt, pnat, 0x00, 14, 2);
+
+/* reg_ppcnt_grp
+ * Performance counter group.
+ * Group 63 indicates all groups. Only valid on Set() operation with
+ * clr bit set.
+ * 0x0: IEEE 802.3 Counters
+ * 0x1: RFC 2863 Counters
+ * 0x2: RFC 2819 Counters
+ * 0x3: RFC 3635 Counters
+ * 0x5: Ethernet Extended Counters
+ * 0x8: Link Level Retransmission Counters
+ * 0x10: Per Priority Counters
+ * 0x11: Per Traffic Class Counters
+ * 0x12: Physical Layer Counters
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, ppcnt, grp, 0x00, 0, 6);
+
+/* reg_ppcnt_clr
+ * Clear counters. Setting the clr bit will reset the counter value
+ * for all counters in the counter group. This bit can be set
+ * for both Set() and Get() operation.
+ * Access: OP
+ */
+MLXSW_ITEM32(reg, ppcnt, clr, 0x04, 31, 1);
+
+/* reg_ppcnt_prio_tc
+ * Priority for counter set that support per priority, valid values: 0-7.
+ * Traffic class for counter set that support per traffic class,
+ * valid values: 0- cap_max_tclass-1 .
+ * For HCA: cap_max_tclass is always 8.
+ * Otherwise must be 0.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, ppcnt, prio_tc, 0x04, 0, 5);
+
+/* reg_ppcnt_a_frames_transmitted_ok
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, a_frames_transmitted_ok,
+ 0x08 + 0x00, 0, 64);
+
+/* reg_ppcnt_a_frames_received_ok
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, a_frames_received_ok,
+ 0x08 + 0x08, 0, 64);
+
+/* reg_ppcnt_a_frame_check_sequence_errors
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, a_frame_check_sequence_errors,
+ 0x08 + 0x10, 0, 64);
+
+/* reg_ppcnt_a_alignment_errors
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, a_alignment_errors,
+ 0x08 + 0x18, 0, 64);
+
+/* reg_ppcnt_a_octets_transmitted_ok
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, a_octets_transmitted_ok,
+ 0x08 + 0x20, 0, 64);
+
+/* reg_ppcnt_a_octets_received_ok
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, a_octets_received_ok,
+ 0x08 + 0x28, 0, 64);
+
+/* reg_ppcnt_a_multicast_frames_xmitted_ok
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, a_multicast_frames_xmitted_ok,
+ 0x08 + 0x30, 0, 64);
+
+/* reg_ppcnt_a_broadcast_frames_xmitted_ok
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, a_broadcast_frames_xmitted_ok,
+ 0x08 + 0x38, 0, 64);
+
+/* reg_ppcnt_a_multicast_frames_received_ok
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, a_multicast_frames_received_ok,
+ 0x08 + 0x40, 0, 64);
+
+/* reg_ppcnt_a_broadcast_frames_received_ok
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, a_broadcast_frames_received_ok,
+ 0x08 + 0x48, 0, 64);
+
+/* reg_ppcnt_a_in_range_length_errors
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, a_in_range_length_errors,
+ 0x08 + 0x50, 0, 64);
+
+/* reg_ppcnt_a_out_of_range_length_field
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, a_out_of_range_length_field,
+ 0x08 + 0x58, 0, 64);
+
+/* reg_ppcnt_a_frame_too_long_errors
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, a_frame_too_long_errors,
+ 0x08 + 0x60, 0, 64);
+
+/* reg_ppcnt_a_symbol_error_during_carrier
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, a_symbol_error_during_carrier,
+ 0x08 + 0x68, 0, 64);
+
+/* reg_ppcnt_a_mac_control_frames_transmitted
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, a_mac_control_frames_transmitted,
+ 0x08 + 0x70, 0, 64);
+
+/* reg_ppcnt_a_mac_control_frames_received
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, a_mac_control_frames_received,
+ 0x08 + 0x78, 0, 64);
+
+/* reg_ppcnt_a_unsupported_opcodes_received
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, a_unsupported_opcodes_received,
+ 0x08 + 0x80, 0, 64);
+
+/* reg_ppcnt_a_pause_mac_ctrl_frames_received
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, a_pause_mac_ctrl_frames_received,
+ 0x08 + 0x88, 0, 64);
+
+/* reg_ppcnt_a_pause_mac_ctrl_frames_transmitted
+ * Access: RO
+ */
+MLXSW_ITEM64(reg, ppcnt, a_pause_mac_ctrl_frames_transmitted,
+ 0x08 + 0x90, 0, 64);
+
+static inline void mlxsw_reg_ppcnt_pack(char *payload, u8 local_port)
+{
+ MLXSW_REG_ZERO(ppcnt, payload);
+ mlxsw_reg_ppcnt_swid_set(payload, 0);
+ mlxsw_reg_ppcnt_local_port_set(payload, local_port);
+ mlxsw_reg_ppcnt_pnat_set(payload, 0);
+ mlxsw_reg_ppcnt_grp_set(payload, 0);
+ mlxsw_reg_ppcnt_clr_set(payload, 0);
+ mlxsw_reg_ppcnt_prio_tc_set(payload, 0);
+}
+
+/* PSPA - Port Switch Partition Allocation
+ * ---------------------------------------
+ * Controls the association of a port with a switch partition and enables
+ * configuring ports as stacking ports.
+ */
+#define MLXSW_REG_PSPA_ID 0x500d
+#define MLXSW_REG_PSPA_LEN 0x8
+
+static const struct mlxsw_reg_info mlxsw_reg_pspa = {
+ .id = MLXSW_REG_PSPA_ID,
+ .len = MLXSW_REG_PSPA_LEN,
+};
+
+/* reg_pspa_swid
+ * Switch partition ID.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, pspa, swid, 0x00, 24, 8);
+
+/* reg_pspa_local_port
+ * Local port number.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, pspa, local_port, 0x00, 16, 8);
+
+/* reg_pspa_sub_port
+ * Virtual port within the local port. Set to 0 when virtual ports are
+ * disabled on the local port.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, pspa, sub_port, 0x00, 8, 8);
+
+static inline void mlxsw_reg_pspa_pack(char *payload, u8 swid, u8 local_port)
+{
+ MLXSW_REG_ZERO(pspa, payload);
+ mlxsw_reg_pspa_swid_set(payload, swid);
+ mlxsw_reg_pspa_local_port_set(payload, local_port);
+ mlxsw_reg_pspa_sub_port_set(payload, 0);
+}
+
+/* HTGT - Host Trap Group Table
+ * ----------------------------
+ * Configures the properties for forwarding to CPU.
+ */
+#define MLXSW_REG_HTGT_ID 0x7002
+#define MLXSW_REG_HTGT_LEN 0x100
+
+static const struct mlxsw_reg_info mlxsw_reg_htgt = {
+ .id = MLXSW_REG_HTGT_ID,
+ .len = MLXSW_REG_HTGT_LEN,
+};
+
+/* reg_htgt_swid
+ * Switch partition ID.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, htgt, swid, 0x00, 24, 8);
+
+#define MLXSW_REG_HTGT_PATH_TYPE_LOCAL 0x0 /* For locally attached CPU */
+
+/* reg_htgt_type
+ * CPU path type.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, htgt, type, 0x00, 8, 4);
+
+#define MLXSW_REG_HTGT_TRAP_GROUP_EMAD 0x0
+#define MLXSW_REG_HTGT_TRAP_GROUP_RX 0x1
+
+/* reg_htgt_trap_group
+ * Trap group number. User defined number specifying which trap groups
+ * should be forwarded to the CPU. The mapping between trap IDs and trap
+ * groups is configured using HPKT register.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, htgt, trap_group, 0x00, 0, 8);
+
+enum {
+ MLXSW_REG_HTGT_POLICER_DISABLE,
+ MLXSW_REG_HTGT_POLICER_ENABLE,
+};
+
+/* reg_htgt_pide
+ * Enable policer ID specified using 'pid' field.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, htgt, pide, 0x04, 15, 1);
+
+/* reg_htgt_pid
+ * Policer ID for the trap group.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, htgt, pid, 0x04, 0, 8);
+
+#define MLXSW_REG_HTGT_TRAP_TO_CPU 0x0
+
+/* reg_htgt_mirror_action
+ * Mirror action to use.
+ * 0 - Trap to CPU.
+ * 1 - Trap to CPU and mirror to a mirroring agent.
+ * 2 - Mirror to a mirroring agent and do not trap to CPU.
+ * Access: RW
+ *
+ * Note: Mirroring to a mirroring agent is only supported in Spectrum.
+ */
+MLXSW_ITEM32(reg, htgt, mirror_action, 0x08, 8, 2);
+
+/* reg_htgt_mirroring_agent
+ * Mirroring agent.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, htgt, mirroring_agent, 0x08, 0, 3);
+
+/* reg_htgt_priority
+ * Trap group priority.
+ * In case a packet matches multiple classification rules, the packet will
+ * only be trapped once, based on the trap ID associated with the group (via
+ * register HPKT) with the highest priority.
+ * Supported values are 0-7, with 7 represnting the highest priority.
+ * Access: RW
+ *
+ * Note: In SwitchX-2 this field is ignored and the priority value is replaced
+ * by the 'trap_group' field.
+ */
+MLXSW_ITEM32(reg, htgt, priority, 0x0C, 0, 4);
+
+/* reg_htgt_local_path_cpu_tclass
+ * CPU ingress traffic class for the trap group.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, htgt, local_path_cpu_tclass, 0x10, 16, 6);
+
+#define MLXSW_REG_HTGT_LOCAL_PATH_RDQ_EMAD 0x15
+#define MLXSW_REG_HTGT_LOCAL_PATH_RDQ_RX 0x14
+
+/* reg_htgt_local_path_rdq
+ * Receive descriptor queue (RDQ) to use for the trap group.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, htgt, local_path_rdq, 0x10, 0, 6);
+
+static inline void mlxsw_reg_htgt_pack(char *payload, u8 trap_group)
+{
+ u8 swid, rdq;
+
+ MLXSW_REG_ZERO(htgt, payload);
+ if (MLXSW_REG_HTGT_TRAP_GROUP_EMAD == trap_group) {
+ swid = MLXSW_PORT_SWID_ALL_SWIDS;
+ rdq = MLXSW_REG_HTGT_LOCAL_PATH_RDQ_EMAD;
+ } else {
+ swid = 0;
+ rdq = MLXSW_REG_HTGT_LOCAL_PATH_RDQ_RX;
+ }
+ mlxsw_reg_htgt_swid_set(payload, swid);
+ mlxsw_reg_htgt_type_set(payload, MLXSW_REG_HTGT_PATH_TYPE_LOCAL);
+ mlxsw_reg_htgt_trap_group_set(payload, trap_group);
+ mlxsw_reg_htgt_pide_set(payload, MLXSW_REG_HTGT_POLICER_DISABLE);
+ mlxsw_reg_htgt_pid_set(payload, 0);
+ mlxsw_reg_htgt_mirror_action_set(payload, MLXSW_REG_HTGT_TRAP_TO_CPU);
+ mlxsw_reg_htgt_mirroring_agent_set(payload, 0);
+ mlxsw_reg_htgt_priority_set(payload, 0);
+ mlxsw_reg_htgt_local_path_cpu_tclass_set(payload, 7);
+ mlxsw_reg_htgt_local_path_rdq_set(payload, rdq);
+}
+
+/* HPKT - Host Packet Trap
+ * -----------------------
+ * Configures trap IDs inside trap groups.
+ */
+#define MLXSW_REG_HPKT_ID 0x7003
+#define MLXSW_REG_HPKT_LEN 0x10
+
+static const struct mlxsw_reg_info mlxsw_reg_hpkt = {
+ .id = MLXSW_REG_HPKT_ID,
+ .len = MLXSW_REG_HPKT_LEN,
+};
+
+enum {
+ MLXSW_REG_HPKT_ACK_NOT_REQUIRED,
+ MLXSW_REG_HPKT_ACK_REQUIRED,
+};
+
+/* reg_hpkt_ack
+ * Require acknowledgements from the host for events.
+ * If set, then the device will wait for the event it sent to be acknowledged
+ * by the host. This option is only relevant for event trap IDs.
+ * Access: RW
+ *
+ * Note: Currently not supported by firmware.
+ */
+MLXSW_ITEM32(reg, hpkt, ack, 0x00, 24, 1);
+
+enum mlxsw_reg_hpkt_action {
+ MLXSW_REG_HPKT_ACTION_FORWARD,
+ MLXSW_REG_HPKT_ACTION_TRAP_TO_CPU,
+ MLXSW_REG_HPKT_ACTION_MIRROR_TO_CPU,
+ MLXSW_REG_HPKT_ACTION_DISCARD,
+ MLXSW_REG_HPKT_ACTION_SOFT_DISCARD,
+ MLXSW_REG_HPKT_ACTION_TRAP_AND_SOFT_DISCARD,
+};
+
+/* reg_hpkt_action
+ * Action to perform on packet when trapped.
+ * 0 - No action. Forward to CPU based on switching rules.
+ * 1 - Trap to CPU (CPU receives sole copy).
+ * 2 - Mirror to CPU (CPU receives a replica of the packet).
+ * 3 - Discard.
+ * 4 - Soft discard (allow other traps to act on the packet).
+ * 5 - Trap and soft discard (allow other traps to overwrite this trap).
+ * Access: RW
+ *
+ * Note: Must be set to 0 (forward) for event trap IDs, as they are already
+ * addressed to the CPU.
+ */
+MLXSW_ITEM32(reg, hpkt, action, 0x00, 20, 3);
+
+/* reg_hpkt_trap_group
+ * Trap group to associate the trap with.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, hpkt, trap_group, 0x00, 12, 6);
+
+/* reg_hpkt_trap_id
+ * Trap ID.
+ * Access: Index
+ *
+ * Note: A trap ID can only be associated with a single trap group. The device
+ * will associate the trap ID with the last trap group configured.
+ */
+MLXSW_ITEM32(reg, hpkt, trap_id, 0x00, 0, 9);
+
+enum {
+ MLXSW_REG_HPKT_CTRL_PACKET_DEFAULT,
+ MLXSW_REG_HPKT_CTRL_PACKET_NO_BUFFER,
+ MLXSW_REG_HPKT_CTRL_PACKET_USE_BUFFER,
+};
+
+/* reg_hpkt_ctrl
+ * Configure dedicated buffer resources for control packets.
+ * 0 - Keep factory defaults.
+ * 1 - Do not use control buffer for this trap ID.
+ * 2 - Use control buffer for this trap ID.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, hpkt, ctrl, 0x04, 16, 2);
+
+static inline void mlxsw_reg_hpkt_pack(char *payload, u8 action,
+ u8 trap_group, u16 trap_id)
+{
+ MLXSW_REG_ZERO(hpkt, payload);
+ mlxsw_reg_hpkt_ack_set(payload, MLXSW_REG_HPKT_ACK_NOT_REQUIRED);
+ mlxsw_reg_hpkt_action_set(payload, action);
+ mlxsw_reg_hpkt_trap_group_set(payload, trap_group);
+ mlxsw_reg_hpkt_trap_id_set(payload, trap_id);
+ mlxsw_reg_hpkt_ctrl_set(payload, MLXSW_REG_HPKT_CTRL_PACKET_DEFAULT);
+}
+
+static inline const char *mlxsw_reg_id_str(u16 reg_id)
+{
+ switch (reg_id) {
+ case MLXSW_REG_SGCR_ID:
+ return "SGCR";
+ case MLXSW_REG_SPAD_ID:
+ return "SPAD";
+ case MLXSW_REG_SMID_ID:
+ return "SMID";
+ case MLXSW_REG_SPMS_ID:
+ return "SPMS";
+ case MLXSW_REG_SFGC_ID:
+ return "SFGC";
+ case MLXSW_REG_SFTR_ID:
+ return "SFTR";
+ case MLXSW_REG_SPMLR_ID:
+ return "SPMLR";
+ case MLXSW_REG_PMLP_ID:
+ return "PMLP";
+ case MLXSW_REG_PMTU_ID:
+ return "PMTU";
+ case MLXSW_REG_PTYS_ID:
+ return "PTYS";
+ case MLXSW_REG_PPAD_ID:
+ return "PPAD";
+ case MLXSW_REG_PAOS_ID:
+ return "PAOS";
+ case MLXSW_REG_PPCNT_ID:
+ return "PPCNT";
+ case MLXSW_REG_PSPA_ID:
+ return "PSPA";
+ case MLXSW_REG_HTGT_ID:
+ return "HTGT";
+ case MLXSW_REG_HPKT_ID:
+ return "HPKT";
+ default:
+ return "*UNKNOWN*";
+ }
+}
+
+/* PUDE - Port Up / Down Event
+ * ---------------------------
+ * Reports the operational state change of a port.
+ */
+#define MLXSW_REG_PUDE_LEN 0x10
+
+/* reg_pude_swid
+ * Switch partition ID with which to associate the port.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, pude, swid, 0x00, 24, 8);
+
+/* reg_pude_local_port
+ * Local port number.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, pude, local_port, 0x00, 16, 8);
+
+/* reg_pude_admin_status
+ * Port administrative state (the desired state).
+ * 1 - Up.
+ * 2 - Down.
+ * 3 - Up once. This means that in case of link failure, the port won't go
+ * into polling mode, but will wait to be re-enabled by software.
+ * 4 - Disabled by system. Can only be set by hardware.
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, pude, admin_status, 0x00, 8, 4);
+
+/* reg_pude_oper_status
+ * Port operatioanl state.
+ * 1 - Up.
+ * 2 - Down.
+ * 3 - Down by port failure. This means that the device will not let the
+ * port up again until explicitly specified by software.
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, pude, oper_status, 0x00, 0, 4);
+
+#endif