| /* |
| * linux/arch/arm/mach-omap2/board-ldp.c |
| * |
| * Copyright (C) 2008 Texas Instruments Inc. |
| * Nishant Kamat <nskamat@ti.com> |
| * |
| * Modified from mach-omap2/board-3430sdp.c |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| #include <linux/gpio.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/delay.h> |
| #include <linux/input.h> |
| #include <linux/input/matrix_keypad.h> |
| #include <linux/gpio_keys.h> |
| #include <linux/workqueue.h> |
| #include <linux/err.h> |
| #include <linux/clk.h> |
| #include <linux/spi/spi.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/i2c/twl.h> |
| #include <linux/io.h> |
| #include <linux/smsc911x.h> |
| #include <linux/mmc/host.h> |
| #include <linux/gpio.h> |
| |
| #include <mach/hardware.h> |
| #include <asm/mach-types.h> |
| #include <asm/mach/arch.h> |
| #include <asm/mach/map.h> |
| |
| #include <plat/mcspi.h> |
| #include <plat/board.h> |
| #include <plat/common.h> |
| #include <plat/gpmc.h> |
| #include <mach/board-zoom.h> |
| |
| #include <asm/delay.h> |
| #include <plat/usb.h> |
| #include <plat/gpmc-smsc911x.h> |
| |
| #include <video/omapdss.h> |
| #include <video/omap-panel-generic-dpi.h> |
| |
| #include "board-flash.h" |
| #include "mux.h" |
| #include "hsmmc.h" |
| #include "control.h" |
| #include "common-board-devices.h" |
| |
| #define LDP_SMSC911X_CS 1 |
| #define LDP_SMSC911X_GPIO 152 |
| #define DEBUG_BASE 0x08000000 |
| #define LDP_ETHR_START DEBUG_BASE |
| |
| static uint32_t board_keymap[] = { |
| KEY(0, 0, KEY_1), |
| KEY(1, 0, KEY_2), |
| KEY(2, 0, KEY_3), |
| KEY(0, 1, KEY_4), |
| KEY(1, 1, KEY_5), |
| KEY(2, 1, KEY_6), |
| KEY(3, 1, KEY_F5), |
| KEY(0, 2, KEY_7), |
| KEY(1, 2, KEY_8), |
| KEY(2, 2, KEY_9), |
| KEY(3, 2, KEY_F6), |
| KEY(0, 3, KEY_F7), |
| KEY(1, 3, KEY_0), |
| KEY(2, 3, KEY_F8), |
| PERSISTENT_KEY(4, 5), |
| KEY(4, 4, KEY_VOLUMEUP), |
| KEY(5, 5, KEY_VOLUMEDOWN), |
| 0 |
| }; |
| |
| static struct matrix_keymap_data board_map_data = { |
| .keymap = board_keymap, |
| .keymap_size = ARRAY_SIZE(board_keymap), |
| }; |
| |
| static struct twl4030_keypad_data ldp_kp_twl4030_data = { |
| .keymap_data = &board_map_data, |
| .rows = 6, |
| .cols = 6, |
| .rep = 1, |
| }; |
| |
| static struct gpio_keys_button ldp_gpio_keys_buttons[] = { |
| [0] = { |
| .code = KEY_ENTER, |
| .gpio = 101, |
| .desc = "enter sw", |
| .active_low = 1, |
| .debounce_interval = 30, |
| }, |
| [1] = { |
| .code = KEY_F1, |
| .gpio = 102, |
| .desc = "func 1", |
| .active_low = 1, |
| .debounce_interval = 30, |
| }, |
| [2] = { |
| .code = KEY_F2, |
| .gpio = 103, |
| .desc = "func 2", |
| .active_low = 1, |
| .debounce_interval = 30, |
| }, |
| [3] = { |
| .code = KEY_F3, |
| .gpio = 104, |
| .desc = "func 3", |
| .active_low = 1, |
| .debounce_interval = 30, |
| }, |
| [4] = { |
| .code = KEY_F4, |
| .gpio = 105, |
| .desc = "func 4", |
| .active_low = 1, |
| .debounce_interval = 30, |
| }, |
| [5] = { |
| .code = KEY_LEFT, |
| .gpio = 106, |
| .desc = "left sw", |
| .active_low = 1, |
| .debounce_interval = 30, |
| }, |
| [6] = { |
| .code = KEY_RIGHT, |
| .gpio = 107, |
| .desc = "right sw", |
| .active_low = 1, |
| .debounce_interval = 30, |
| }, |
| [7] = { |
| .code = KEY_UP, |
| .gpio = 108, |
| .desc = "up sw", |
| .active_low = 1, |
| .debounce_interval = 30, |
| }, |
| [8] = { |
| .code = KEY_DOWN, |
| .gpio = 109, |
| .desc = "down sw", |
| .active_low = 1, |
| .debounce_interval = 30, |
| }, |
| }; |
| |
| static struct gpio_keys_platform_data ldp_gpio_keys = { |
| .buttons = ldp_gpio_keys_buttons, |
| .nbuttons = ARRAY_SIZE(ldp_gpio_keys_buttons), |
| .rep = 1, |
| }; |
| |
| static struct platform_device ldp_gpio_keys_device = { |
| .name = "gpio-keys", |
| .id = -1, |
| .dev = { |
| .platform_data = &ldp_gpio_keys, |
| }, |
| }; |
| |
| static struct omap_smsc911x_platform_data smsc911x_cfg = { |
| .cs = LDP_SMSC911X_CS, |
| .gpio_irq = LDP_SMSC911X_GPIO, |
| .gpio_reset = -EINVAL, |
| .flags = SMSC911X_USE_32BIT, |
| }; |
| |
| static inline void __init ldp_init_smsc911x(void) |
| { |
| gpmc_smsc911x_init(&smsc911x_cfg); |
| } |
| |
| /* LCD */ |
| |
| static int ldp_backlight_gpio; |
| static int ldp_lcd_enable_gpio; |
| |
| #define LCD_PANEL_RESET_GPIO 55 |
| #define LCD_PANEL_QVGA_GPIO 56 |
| |
| static int ldp_panel_enable_lcd(struct omap_dss_device *dssdev) |
| { |
| if (gpio_is_valid(ldp_lcd_enable_gpio)) |
| gpio_direction_output(ldp_lcd_enable_gpio, 1); |
| if (gpio_is_valid(ldp_backlight_gpio)) |
| gpio_direction_output(ldp_backlight_gpio, 1); |
| |
| return 0; |
| } |
| |
| static void ldp_panel_disable_lcd(struct omap_dss_device *dssdev) |
| { |
| if (gpio_is_valid(ldp_lcd_enable_gpio)) |
| gpio_direction_output(ldp_lcd_enable_gpio, 0); |
| if (gpio_is_valid(ldp_backlight_gpio)) |
| gpio_direction_output(ldp_backlight_gpio, 0); |
| } |
| |
| static struct panel_generic_dpi_data ldp_panel_data = { |
| .name = "nec_nl2432dr22-11b", |
| .platform_enable = ldp_panel_enable_lcd, |
| .platform_disable = ldp_panel_disable_lcd, |
| }; |
| |
| static struct omap_dss_device ldp_lcd_device = { |
| .name = "lcd", |
| .driver_name = "generic_dpi_panel", |
| .type = OMAP_DISPLAY_TYPE_DPI, |
| .phy.dpi.data_lines = 18, |
| .data = &ldp_panel_data, |
| }; |
| |
| static struct omap_dss_device *ldp_dss_devices[] = { |
| &ldp_lcd_device, |
| }; |
| |
| static struct omap_dss_board_info ldp_dss_data = { |
| .num_devices = ARRAY_SIZE(ldp_dss_devices), |
| .devices = ldp_dss_devices, |
| .default_device = &ldp_lcd_device, |
| }; |
| |
| static void __init ldp_display_init(void) |
| { |
| int r; |
| |
| static struct gpio gpios[] __initdata = { |
| {LCD_PANEL_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "LCD RESET"}, |
| {LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "LCD QVGA"}, |
| }; |
| |
| r = gpio_request_array(gpios, ARRAY_SIZE(gpios)); |
| if (r) { |
| pr_err("Cannot request LCD GPIOs, error %d\n", r); |
| return; |
| } |
| |
| omap_display_init(&ldp_dss_data); |
| } |
| |
| static void __init omap_ldp_init_early(void) |
| { |
| omap2_init_common_infrastructure(); |
| omap2_init_common_devices(NULL, NULL); |
| } |
| |
| static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) |
| { |
| int r; |
| |
| struct gpio gpios[] = { |
| {gpio + 7 , GPIOF_OUT_INIT_LOW, "LCD ENABLE"}, |
| {gpio + 15, GPIOF_OUT_INIT_LOW, "LCD BACKLIGHT"}, |
| }; |
| |
| r = gpio_request_array(gpios, ARRAY_SIZE(gpios)); |
| if (r) { |
| pr_err("Cannot request LCD GPIOs, error %d\n", r); |
| ldp_backlight_gpio = -EINVAL; |
| ldp_lcd_enable_gpio = -EINVAL; |
| return r; |
| } |
| |
| ldp_backlight_gpio = gpio + 15; |
| ldp_lcd_enable_gpio = gpio + 7; |
| |
| return 0; |
| } |
| |
| static struct twl4030_gpio_platform_data ldp_gpio_data = { |
| .gpio_base = OMAP_MAX_GPIO_LINES, |
| .irq_base = TWL4030_GPIO_IRQ_BASE, |
| .irq_end = TWL4030_GPIO_IRQ_END, |
| .setup = ldp_twl_gpio_setup, |
| }; |
| |
| static struct regulator_consumer_supply ldp_vmmc1_supply[] = { |
| REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), |
| }; |
| |
| /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ |
| static struct regulator_init_data ldp_vmmc1 = { |
| .constraints = { |
| .min_uV = 1850000, |
| .max_uV = 3150000, |
| .valid_modes_mask = REGULATOR_MODE_NORMAL |
| | REGULATOR_MODE_STANDBY, |
| .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
| | REGULATOR_CHANGE_MODE |
| | REGULATOR_CHANGE_STATUS, |
| }, |
| .num_consumer_supplies = ARRAY_SIZE(ldp_vmmc1_supply), |
| .consumer_supplies = ldp_vmmc1_supply, |
| }; |
| |
| /* ads7846 on SPI */ |
| static struct regulator_consumer_supply ldp_vaux1_supplies[] = { |
| REGULATOR_SUPPLY("vcc", "spi1.0"), |
| }; |
| |
| /* VAUX1 */ |
| static struct regulator_init_data ldp_vaux1 = { |
| .constraints = { |
| .min_uV = 3000000, |
| .max_uV = 3000000, |
| .apply_uV = true, |
| .valid_modes_mask = REGULATOR_MODE_NORMAL |
| | REGULATOR_MODE_STANDBY, |
| .valid_ops_mask = REGULATOR_CHANGE_MODE |
| | REGULATOR_CHANGE_STATUS, |
| }, |
| .num_consumer_supplies = ARRAY_SIZE(ldp_vaux1_supplies), |
| .consumer_supplies = ldp_vaux1_supplies, |
| }; |
| |
| static struct regulator_consumer_supply ldp_vpll2_supplies[] = { |
| REGULATOR_SUPPLY("vdds_dsi", "omapdss"), |
| REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), |
| }; |
| |
| static struct regulator_init_data ldp_vpll2 = { |
| .constraints = { |
| .name = "VDVI", |
| .min_uV = 1800000, |
| .max_uV = 1800000, |
| .apply_uV = true, |
| .valid_modes_mask = REGULATOR_MODE_NORMAL |
| | REGULATOR_MODE_STANDBY, |
| .valid_ops_mask = REGULATOR_CHANGE_MODE |
| | REGULATOR_CHANGE_STATUS, |
| }, |
| .num_consumer_supplies = ARRAY_SIZE(ldp_vpll2_supplies), |
| .consumer_supplies = ldp_vpll2_supplies, |
| }; |
| |
| static struct twl4030_platform_data ldp_twldata = { |
| /* platform_data for children goes here */ |
| .vmmc1 = &ldp_vmmc1, |
| .vaux1 = &ldp_vaux1, |
| .vpll2 = &ldp_vpll2, |
| .gpio = &ldp_gpio_data, |
| .keypad = &ldp_kp_twl4030_data, |
| }; |
| |
| static int __init omap_i2c_init(void) |
| { |
| omap3_pmic_get_config(&ldp_twldata, |
| TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC, 0); |
| omap3_pmic_init("twl4030", &ldp_twldata); |
| omap_register_i2c_bus(2, 400, NULL, 0); |
| omap_register_i2c_bus(3, 400, NULL, 0); |
| return 0; |
| } |
| |
| static struct omap2_hsmmc_info mmc[] __initdata = { |
| { |
| .mmc = 1, |
| .caps = MMC_CAP_4_BIT_DATA, |
| .gpio_cd = -EINVAL, |
| .gpio_wp = -EINVAL, |
| }, |
| {} /* Terminator */ |
| }; |
| |
| static struct platform_device *ldp_devices[] __initdata = { |
| &ldp_gpio_keys_device, |
| }; |
| |
| #ifdef CONFIG_OMAP_MUX |
| static struct omap_board_mux board_mux[] __initdata = { |
| { .reg_offset = OMAP_MUX_TERMINATOR }, |
| }; |
| #endif |
| |
| static struct mtd_partition ldp_nand_partitions[] = { |
| /* All the partition sizes are listed in terms of NAND block size */ |
| { |
| .name = "X-Loader-NAND", |
| .offset = 0, |
| .size = 4 * (64 * 2048), /* 512KB, 0x80000 */ |
| .mask_flags = MTD_WRITEABLE, /* force read-only */ |
| }, |
| { |
| .name = "U-Boot-NAND", |
| .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ |
| .size = 10 * (64 * 2048), /* 1.25MB, 0x140000 */ |
| .mask_flags = MTD_WRITEABLE, /* force read-only */ |
| }, |
| { |
| .name = "Boot Env-NAND", |
| .offset = MTDPART_OFS_APPEND, /* Offset = 0x1c0000 */ |
| .size = 2 * (64 * 2048), /* 256KB, 0x40000 */ |
| }, |
| { |
| .name = "Kernel-NAND", |
| .offset = MTDPART_OFS_APPEND, /* Offset = 0x0200000*/ |
| .size = 240 * (64 * 2048), /* 30M, 0x1E00000 */ |
| }, |
| { |
| .name = "File System - NAND", |
| .offset = MTDPART_OFS_APPEND, /* Offset = 0x2000000 */ |
| .size = MTDPART_SIZ_FULL, /* 96MB, 0x6000000 */ |
| }, |
| |
| }; |
| |
| static void __init omap_ldp_init(void) |
| { |
| omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); |
| ldp_init_smsc911x(); |
| omap_i2c_init(); |
| platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices)); |
| omap_ads7846_init(1, 54, 310, NULL); |
| omap_serial_init(); |
| usb_musb_init(NULL); |
| board_nand_init(ldp_nand_partitions, |
| ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0); |
| |
| omap2_hsmmc_init(mmc); |
| ldp_display_init(); |
| } |
| |
| MACHINE_START(OMAP_LDP, "OMAP LDP board") |
| .atag_offset = 0x100, |
| .reserve = omap_reserve, |
| .map_io = omap3_map_io, |
| .init_early = omap_ldp_init_early, |
| .init_irq = omap3_init_irq, |
| .init_machine = omap_ldp_init, |
| .timer = &omap3_timer, |
| MACHINE_END |