arch/arm/mm/proc-v7.S - kernel/msm-4.19 - Gitiles

 /*
  *  linux/arch/arm/mm/proc-v7.S
  *
  *  Copyright (C) 2001 Deep Blue Solutions Ltd.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
  *  This is the "shell" of the ARMv7 processor support.
  */
 #include <linux/init.h>
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
 #include <asm/hwcap.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>

 #include "proc-macros.S"

 #ifdef CONFIG_ARM_LPAE
 #include "proc-v7-3level.S"
 #else
 #include "proc-v7-2level.S"
 #endif

 ENTRY(cpu_v7_proc_init)
 	ret	lr
 ENDPROC(cpu_v7_proc_init)

 ENTRY(cpu_v7_proc_fin)
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000			@ ...i............
 	bic	r0, r0, #0x0006			@ .............ca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
 	ret	lr
 ENDPROC(cpu_v7_proc_fin)

 /*
  *	cpu_v7_reset(loc)
  *
  *	Perform a soft reset of the system.  Put the CPU into the
  *	same state as it would be if it had been reset, and branch
  *	to what would be the reset vector.
  *
  *	- loc   - location to jump to for soft reset
  *
  *	This code must be executed using a flat identity mapping with
  *      caches disabled.
  */
 	.align	5
 	.pushsection	.idmap.text, "ax"
 ENTRY(cpu_v7_reset)
 	mrc	p15, 0, r1, c1, c0, 0		@ ctrl register
 	bic	r1, r1, #0x1			@ ...............m
  THUMB(	bic	r1, r1, #1 << 30 )		@ SCTLR.TE (Thumb exceptions)
 	mcr	p15, 0, r1, c1, c0, 0		@ disable MMU
 	isb
 	bx	r0
 ENDPROC(cpu_v7_reset)
 	.popsection

 /*
  *	cpu_v7_do_idle()
  *
  *	Idle the processor (eg, wait for interrupt).
  *
  *	IRQs are already disabled.
  */
 ENTRY(cpu_v7_do_idle)
 	dsb					@ WFI may enter a low-power mode
 	wfi
 	ret	lr
 ENDPROC(cpu_v7_do_idle)

 ENTRY(cpu_v7_dcache_clean_area)
 	ALT_SMP(W(nop))			@ MP extensions imply L1 PTW
 	ALT_UP_B(1f)
 	ret	lr
 1:	dcache_line_size r2, r3
 2:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	add	r0, r0, r2
 	subs	r1, r1, r2
 	bhi	2b
 	dsb	ishst
 	ret	lr
 ENDPROC(cpu_v7_dcache_clean_area)

 	string	cpu_v7_name, "ARMv7 Processor"
 	.align

 /* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */
 .globl	cpu_v7_suspend_size
 .equ	cpu_v7_suspend_size, 4 * 9
 #ifdef CONFIG_ARM_CPU_SUSPEND
 ENTRY(cpu_v7_do_suspend)
 	stmfd	sp!, {r4 - r11, lr}
 	mrc	p15, 0, r4, c13, c0, 0	@ FCSE/PID
 	mrc	p15, 0, r5, c13, c0, 3	@ User r/o thread ID
 	stmia	r0!, {r4 - r5}
 #ifdef CONFIG_MMU
 	mrc	p15, 0, r6, c3, c0, 0	@ Domain ID
 #ifdef CONFIG_ARM_LPAE
 	mrrc	p15, 1, r5, r7, c2	@ TTB 1
 #else
 	mrc	p15, 0, r7, c2, c0, 1	@ TTB 1
 #endif
 	mrc	p15, 0, r11, c2, c0, 2	@ TTB control register
 #endif
 	mrc	p15, 0, r8, c1, c0, 0	@ Control register
 	mrc	p15, 0, r9, c1, c0, 1	@ Auxiliary control register
 	mrc	p15, 0, r10, c1, c0, 2	@ Co-processor access control
 	stmia	r0, {r5 - r11}
 	ldmfd	sp!, {r4 - r11, pc}
 ENDPROC(cpu_v7_do_suspend)

 ENTRY(cpu_v7_do_resume)
 	mov	ip, #0
 	mcr	p15, 0, ip, c7, c5, 0	@ invalidate I cache
 	mcr	p15, 0, ip, c13, c0, 1	@ set reserved context ID
 	ldmia	r0!, {r4 - r5}
 	mcr	p15, 0, r4, c13, c0, 0	@ FCSE/PID
 	mcr	p15, 0, r5, c13, c0, 3	@ User r/o thread ID
 	ldmia	r0, {r5 - r11}
 #ifdef CONFIG_MMU
 	mcr	p15, 0, ip, c8, c7, 0	@ invalidate TLBs
 	mcr	p15, 0, r6, c3, c0, 0	@ Domain ID
 #ifdef CONFIG_ARM_LPAE
 	mcrr	p15, 0, r1, ip, c2	@ TTB 0
 	mcrr	p15, 1, r5, r7, c2	@ TTB 1
 #else
 	ALT_SMP(orr	r1, r1, #TTB_FLAGS_SMP)
 	ALT_UP(orr	r1, r1, #TTB_FLAGS_UP)
 	mcr	p15, 0, r1, c2, c0, 0	@ TTB 0
 	mcr	p15, 0, r7, c2, c0, 1	@ TTB 1
 #endif
 	mcr	p15, 0, r11, c2, c0, 2	@ TTB control register
 	ldr	r4, =PRRR		@ PRRR
 	ldr	r5, =NMRR		@ NMRR
 	mcr	p15, 0, r4, c10, c2, 0	@ write PRRR
 	mcr	p15, 0, r5, c10, c2, 1	@ write NMRR
 #endif	/* CONFIG_MMU */
 	mrc	p15, 0, r4, c1, c0, 1	@ Read Auxiliary control register
 	teq	r4, r9			@ Is it already set?
 	mcrne	p15, 0, r9, c1, c0, 1	@ No, so write it
 	mcr	p15, 0, r10, c1, c0, 2	@ Co-processor access control
 	isb
 	dsb
 	mov	r0, r8			@ control register
 	b	cpu_resume_mmu
 ENDPROC(cpu_v7_do_resume)
 #endif

 /*
  * Cortex-A8
  */
 	globl_equ	cpu_ca8_proc_init,	cpu_v7_proc_init
 	globl_equ	cpu_ca8_proc_fin,	cpu_v7_proc_fin
 	globl_equ	cpu_ca8_reset,		cpu_v7_reset
 	globl_equ	cpu_ca8_do_idle,	cpu_v7_do_idle
 	globl_equ	cpu_ca8_dcache_clean_area, cpu_v7_dcache_clean_area
 	globl_equ	cpu_ca8_set_pte_ext,	cpu_v7_set_pte_ext
 	globl_equ	cpu_ca8_suspend_size,	cpu_v7_suspend_size
 #ifdef CONFIG_ARM_CPU_SUSPEND
 	globl_equ	cpu_ca8_do_suspend,	cpu_v7_do_suspend
 	globl_equ	cpu_ca8_do_resume,	cpu_v7_do_resume
 #endif

 /*
  * Cortex-A9 processor functions
  */
 	globl_equ	cpu_ca9mp_proc_init,	cpu_v7_proc_init
 	globl_equ	cpu_ca9mp_proc_fin,	cpu_v7_proc_fin
 	globl_equ	cpu_ca9mp_reset,	cpu_v7_reset
 	globl_equ	cpu_ca9mp_do_idle,	cpu_v7_do_idle
 	globl_equ	cpu_ca9mp_dcache_clean_area, cpu_v7_dcache_clean_area
 	globl_equ	cpu_ca9mp_switch_mm,	cpu_v7_switch_mm
 	globl_equ	cpu_ca9mp_set_pte_ext,	cpu_v7_set_pte_ext
 .globl	cpu_ca9mp_suspend_size
 .equ	cpu_ca9mp_suspend_size, cpu_v7_suspend_size + 4 * 2
 #ifdef CONFIG_ARM_CPU_SUSPEND
 ENTRY(cpu_ca9mp_do_suspend)
 	stmfd	sp!, {r4 - r5}
 	mrc	p15, 0, r4, c15, c0, 1		@ Diagnostic register
 	mrc	p15, 0, r5, c15, c0, 0		@ Power register
 	stmia	r0!, {r4 - r5}
 	ldmfd	sp!, {r4 - r5}
 	b	cpu_v7_do_suspend
 ENDPROC(cpu_ca9mp_do_suspend)

 ENTRY(cpu_ca9mp_do_resume)
 	ldmia	r0!, {r4 - r5}
 	mrc	p15, 0, r10, c15, c0, 1		@ Read Diagnostic register
 	teq	r4, r10				@ Already restored?
 	mcrne	p15, 0, r4, c15, c0, 1		@ No, so restore it
 	mrc	p15, 0, r10, c15, c0, 0		@ Read Power register
 	teq	r5, r10				@ Already restored?
 	mcrne	p15, 0, r5, c15, c0, 0		@ No, so restore it
 	b	cpu_v7_do_resume
 ENDPROC(cpu_ca9mp_do_resume)
 #endif

 #ifdef CONFIG_CPU_PJ4B
 	globl_equ	cpu_pj4b_switch_mm,     cpu_v7_switch_mm
 	globl_equ	cpu_pj4b_set_pte_ext,	cpu_v7_set_pte_ext
 	globl_equ	cpu_pj4b_proc_init,	cpu_v7_proc_init
 	globl_equ	cpu_pj4b_proc_fin, 	cpu_v7_proc_fin
 	globl_equ	cpu_pj4b_reset,	   	cpu_v7_reset
 #ifdef CONFIG_PJ4B_ERRATA_4742
 ENTRY(cpu_pj4b_do_idle)
 	dsb					@ WFI may enter a low-power mode
 	wfi
 	dsb					@barrier
 	ret	lr
 ENDPROC(cpu_pj4b_do_idle)
 #else
 	globl_equ	cpu_pj4b_do_idle,  	cpu_v7_do_idle
 #endif
 	globl_equ	cpu_pj4b_dcache_clean_area,	cpu_v7_dcache_clean_area
 #ifdef CONFIG_ARM_CPU_SUSPEND
 ENTRY(cpu_pj4b_do_suspend)
 	stmfd	sp!, {r6 - r10}
 	mrc	p15, 1, r6, c15, c1, 0  @ save CP15 - extra features
 	mrc	p15, 1, r7, c15, c2, 0	@ save CP15 - Aux Func Modes Ctrl 0
 	mrc	p15, 1, r8, c15, c1, 2	@ save CP15 - Aux Debug Modes Ctrl 2
 	mrc	p15, 1, r9, c15, c1, 1  @ save CP15 - Aux Debug Modes Ctrl 1
 	mrc	p15, 0, r10, c9, c14, 0  @ save CP15 - PMC
 	stmia	r0!, {r6 - r10}
 	ldmfd	sp!, {r6 - r10}
 	b cpu_v7_do_suspend
 ENDPROC(cpu_pj4b_do_suspend)

 ENTRY(cpu_pj4b_do_resume)
 	ldmia	r0!, {r6 - r10}
 	mcr	p15, 1, r6, c15, c1, 0  @ restore CP15 - extra features
 	mcr	p15, 1, r7, c15, c2, 0	@ restore CP15 - Aux Func Modes Ctrl 0
 	mcr	p15, 1, r8, c15, c1, 2	@ restore CP15 - Aux Debug Modes Ctrl 2
 	mcr	p15, 1, r9, c15, c1, 1  @ restore CP15 - Aux Debug Modes Ctrl 1
 	mcr	p15, 0, r10, c9, c14, 0  @ restore CP15 - PMC
 	b cpu_v7_do_resume
 ENDPROC(cpu_pj4b_do_resume)
 #endif
 .globl	cpu_pj4b_suspend_size
 .equ	cpu_pj4b_suspend_size, cpu_v7_suspend_size + 4 * 5

 #endif

 /*
  *	__v7_setup
  *
  *	Initialise TLB, Caches, and MMU state ready to switch the MMU
  *	on.  Return in r0 the new CP15 C1 control register setting.
  *
  *	r1, r2, r4, r5, r9, r13 must be preserved - r13 is not a stack
  *	r4: TTBR0 (low word)
  *	r5: TTBR0 (high word if LPAE)
  *	r8: TTBR1
  *	r9: Main ID register
  *
  *	This should be able to cover all ARMv7 cores.
  *
  *	It is assumed that:
  *	- cache type register is implemented
  */
 __v7_ca5mp_setup:
 __v7_ca9mp_setup:
 __v7_cr7mp_setup:
 	mov	r10, #(1 << 0)			@ Cache/TLB ops broadcasting
 	b	1f
 __v7_ca7mp_setup:
 __v7_ca12mp_setup:
 __v7_ca15mp_setup:
 __v7_b15mp_setup:
 __v7_ca17mp_setup:
 	mov	r10, #0
 1:	adr	r0, __v7_setup_stack_ptr
 	ldr	r12, [r0]
 	add	r12, r12, r0			@ the local stack
 	stmia	r12, {r1-r6, lr}		@ v7_invalidate_l1 touches r0-r6
 	bl      v7_invalidate_l1
 	ldmia	r12, {r1-r6, lr}
 #ifdef CONFIG_SMP
 	ALT_SMP(mrc	p15, 0, r0, c1, c0, 1)
 	ALT_UP(mov	r0, #(1 << 6))		@ fake it for UP
 	tst	r0, #(1 << 6)			@ SMP/nAMP mode enabled?
 	orreq	r0, r0, #(1 << 6)		@ Enable SMP/nAMP mode
 	orreq	r0, r0, r10			@ Enable CPU-specific SMP bits
 	mcreq	p15, 0, r0, c1, c0, 1
 #endif
 	b	__v7_setup_cont

 /*
  * Errata:
  *  r0, r10 available for use
  *  r1, r2, r4, r5, r9, r13: must be preserved
  *  r3: contains MIDR rX number in bits 23-20
  *  r6: contains MIDR rXpY as 8-bit XY number
  *  r9: MIDR
  */
 __ca8_errata:
 #if defined(CONFIG_ARM_ERRATA_430973) && !defined(CONFIG_ARCH_MULTIPLATFORM)
 	teq	r3, #0x00100000			@ only present in r1p*
 	mrceq	p15, 0, r0, c1, c0, 1		@ read aux control register
 	orreq	r0, r0, #(1 << 6)		@ set IBE to 1
 	mcreq	p15, 0, r0, c1, c0, 1		@ write aux control register
 #endif
 #ifdef CONFIG_ARM_ERRATA_458693
 	teq	r6, #0x20			@ only present in r2p0
 	mrceq	p15, 0, r0, c1, c0, 1		@ read aux control register
 	orreq	r0, r0, #(1 << 5)		@ set L1NEON to 1
 	orreq	r0, r0, #(1 << 9)		@ set PLDNOP to 1
 	mcreq	p15, 0, r0, c1, c0, 1		@ write aux control register
 #endif
 #ifdef CONFIG_ARM_ERRATA_460075
 	teq	r6, #0x20			@ only present in r2p0
 	mrceq	p15, 1, r0, c9, c0, 2		@ read L2 cache aux ctrl register
 	tsteq	r0, #1 << 22
 	orreq	r0, r0, #(1 << 22)		@ set the Write Allocate disable bit
 	mcreq	p15, 1, r0, c9, c0, 2		@ write the L2 cache aux ctrl register
 #endif
 	b	__errata_finish

 __ca9_errata:
 #ifdef CONFIG_ARM_ERRATA_742230
 	cmp	r6, #0x22			@ only present up to r2p2
 	mrcle	p15, 0, r0, c15, c0, 1		@ read diagnostic register
 	orrle	r0, r0, #1 << 4			@ set bit #4
 	mcrle	p15, 0, r0, c15, c0, 1		@ write diagnostic register
 #endif
 #ifdef CONFIG_ARM_ERRATA_742231
 	teq	r6, #0x20			@ present in r2p0
 	teqne	r6, #0x21			@ present in r2p1
 	teqne	r6, #0x22			@ present in r2p2
 	mrceq	p15, 0, r0, c15, c0, 1		@ read diagnostic register
 	orreq	r0, r0, #1 << 12		@ set bit #12
 	orreq	r0, r0, #1 << 22		@ set bit #22
 	mcreq	p15, 0, r0, c15, c0, 1		@ write diagnostic register
 #endif
 #ifdef CONFIG_ARM_ERRATA_743622
 	teq	r3, #0x00200000			@ only present in r2p*
 	mrceq	p15, 0, r0, c15, c0, 1		@ read diagnostic register
 	orreq	r0, r0, #1 << 6			@ set bit #6
 	mcreq	p15, 0, r0, c15, c0, 1		@ write diagnostic register
 #endif
 #if defined(CONFIG_ARM_ERRATA_751472) && defined(CONFIG_SMP)
 	ALT_SMP(cmp r6, #0x30)			@ present prior to r3p0
 	ALT_UP_B(1f)
 	mrclt	p15, 0, r0, c15, c0, 1		@ read diagnostic register
 	orrlt	r0, r0, #1 << 11		@ set bit #11
 	mcrlt	p15, 0, r0, c15, c0, 1		@ write diagnostic register
 1:
 #endif
 	b	__errata_finish

 __ca15_errata:
 #ifdef CONFIG_ARM_ERRATA_773022
 	cmp	r6, #0x4			@ only present up to r0p4
 	mrcle	p15, 0, r0, c1, c0, 1		@ read aux control register
 	orrle	r0, r0, #1 << 1			@ disable loop buffer
 	mcrle	p15, 0, r0, c1, c0, 1		@ write aux control register
 #endif
 	b	__errata_finish

 __v7_pj4b_setup:
 #ifdef CONFIG_CPU_PJ4B

 /* Auxiliary Debug Modes Control 1 Register */
 #define PJ4B_STATIC_BP (1 << 2) /* Enable Static BP */
 #define PJ4B_INTER_PARITY (1 << 8) /* Disable Internal Parity Handling */
 #define PJ4B_CLEAN_LINE (1 << 16) /* Disable data transfer for clean line */

 /* Auxiliary Debug Modes Control 2 Register */
 #define PJ4B_FAST_LDR (1 << 23) /* Disable fast LDR */
 #define PJ4B_SNOOP_DATA (1 << 25) /* Do not interleave write and snoop data */
 #define PJ4B_CWF (1 << 27) /* Disable Critical Word First feature */
 #define PJ4B_OUTSDNG_NC (1 << 29) /* Disable outstanding non cacheable rqst */
 #define PJ4B_L1_REP_RR (1 << 30) /* L1 replacement - Strict round robin */
 #define PJ4B_AUX_DBG_CTRL2 (PJ4B_SNOOP_DATA | PJ4B_CWF |\
 			    PJ4B_OUTSDNG_NC | PJ4B_L1_REP_RR)

 /* Auxiliary Functional Modes Control Register 0 */
 #define PJ4B_SMP_CFB (1 << 1) /* Set SMP mode. Join the coherency fabric */
 #define PJ4B_L1_PAR_CHK (1 << 2) /* Support L1 parity checking */
 #define PJ4B_BROADCAST_CACHE (1 << 8) /* Broadcast Cache and TLB maintenance */

 /* Auxiliary Debug Modes Control 0 Register */
 #define PJ4B_WFI_WFE (1 << 22) /* WFI/WFE - serve the DVM and back to idle */

 	/* Auxiliary Debug Modes Control 1 Register */
 	mrc	p15, 1,	r0, c15, c1, 1
 	orr     r0, r0, #PJ4B_CLEAN_LINE
 	orr     r0, r0, #PJ4B_INTER_PARITY
 	bic	r0, r0, #PJ4B_STATIC_BP
 	mcr	p15, 1,	r0, c15, c1, 1

 	/* Auxiliary Debug Modes Control 2 Register */
 	mrc	p15, 1,	r0, c15, c1, 2
 	bic	r0, r0, #PJ4B_FAST_LDR
 	orr	r0, r0, #PJ4B_AUX_DBG_CTRL2
 	mcr	p15, 1,	r0, c15, c1, 2

 	/* Auxiliary Functional Modes Control Register 0 */
 	mrc	p15, 1,	r0, c15, c2, 0
 #ifdef CONFIG_SMP
 	orr	r0, r0, #PJ4B_SMP_CFB
 #endif
 	orr	r0, r0, #PJ4B_L1_PAR_CHK
 	orr	r0, r0, #PJ4B_BROADCAST_CACHE
 	mcr	p15, 1,	r0, c15, c2, 0

 	/* Auxiliary Debug Modes Control 0 Register */
 	mrc	p15, 1,	r0, c15, c1, 0
 	orr	r0, r0, #PJ4B_WFI_WFE
 	mcr	p15, 1,	r0, c15, c1, 0

 #endif /* CONFIG_CPU_PJ4B */

 __v7_setup:
 	adr	r0, __v7_setup_stack_ptr
 	ldr	r12, [r0]
 	add	r12, r12, r0			@ the local stack
 	stmia	r12, {r1-r6, lr}		@ v7_invalidate_l1 touches r0-r6
 	bl      v7_invalidate_l1
 	ldmia	r12, {r1-r6, lr}

 __v7_setup_cont:
 	and	r0, r9, #0xff000000		@ ARM?
 	teq	r0, #0x41000000
 	bne	__errata_finish
 	and	r3, r9, #0x00f00000		@ variant
 	and	r6, r9, #0x0000000f		@ revision
 	orr	r6, r6, r3, lsr #20-4		@ combine variant and revision
 	ubfx	r0, r9, #4, #12			@ primary part number

 	/* Cortex-A8 Errata */
 	ldr	r10, =0x00000c08		@ Cortex-A8 primary part number
 	teq	r0, r10
 	beq	__ca8_errata

 	/* Cortex-A9 Errata */
 	ldr	r10, =0x00000c09		@ Cortex-A9 primary part number
 	teq	r0, r10
 	beq	__ca9_errata

 	/* Cortex-A15 Errata */
 	ldr	r10, =0x00000c0f		@ Cortex-A15 primary part number
 	teq	r0, r10
 	beq	__ca15_errata

 __errata_finish:
 	mov	r10, #0
 	mcr	p15, 0, r10, c7, c5, 0		@ I+BTB cache invalidate
 #ifdef CONFIG_MMU
 	mcr	p15, 0, r10, c8, c7, 0		@ invalidate I + D TLBs
 	v7_ttb_setup r10, r4, r5, r8, r3	@ TTBCR, TTBRx setup
 	ldr	r3, =PRRR			@ PRRR
 	ldr	r6, =NMRR			@ NMRR
 	mcr	p15, 0, r3, c10, c2, 0		@ write PRRR
 	mcr	p15, 0, r6, c10, c2, 1		@ write NMRR
 #endif
 	dsb					@ Complete invalidations
 #ifndef CONFIG_ARM_THUMBEE
 	mrc	p15, 0, r0, c0, c1, 0		@ read ID_PFR0 for ThumbEE
 	and	r0, r0, #(0xf << 12)		@ ThumbEE enabled field
 	teq	r0, #(1 << 12)			@ check if ThumbEE is present
 	bne	1f
 	mov	r3, #0
 	mcr	p14, 6, r3, c1, c0, 0		@ Initialize TEEHBR to 0
 	mrc	p14, 6, r0, c0, c0, 0		@ load TEECR
 	orr	r0, r0, #1			@ set the 1st bit in order to
 	mcr	p14, 6, r0, c0, c0, 0		@ stop userspace TEEHBR access
 1:
 #endif
 	adr	r3, v7_crval
 	ldmia	r3, {r3, r6}
  ARM_BE8(orr	r6, r6, #1 << 25)		@ big-endian page tables
 #ifdef CONFIG_SWP_EMULATE
 	orr     r3, r3, #(1 << 10)              @ set SW bit in "clear"
 	bic     r6, r6, #(1 << 10)              @ clear it in "mmuset"
 #endif
    	mrc	p15, 0, r0, c1, c0, 0		@ read control register
 	bic	r0, r0, r3			@ clear bits them
 	orr	r0, r0, r6			@ set them
  THUMB(	orr	r0, r0, #1 << 30	)	@ Thumb exceptions
 	ret	lr				@ return to head.S:__ret

 	.align	2
 __v7_setup_stack_ptr:
 	.word	__v7_setup_stack - .
 ENDPROC(__v7_setup)

 	.bss
 	.align	2
 __v7_setup_stack:
 	.space	4 * 7				@ 7 registers

 	__INITDATA

 	@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
 	define_processor_functions v7, dabort=v7_early_abort, pabort=v7_pabort, suspend=1
 #ifndef CONFIG_ARM_LPAE
 	define_processor_functions ca8, dabort=v7_early_abort, pabort=v7_pabort, suspend=1
 	define_processor_functions ca9mp, dabort=v7_early_abort, pabort=v7_pabort, suspend=1
 #endif
 #ifdef CONFIG_CPU_PJ4B
 	define_processor_functions pj4b, dabort=v7_early_abort, pabort=v7_pabort, suspend=1
 #endif

 	.section ".rodata"

 	string	cpu_arch_name, "armv7"
 	string	cpu_elf_name, "v7"
 	.align

 	.section ".proc.info.init", #alloc

 	/*
 	 * Standard v7 proc info content
 	 */
 .macro __v7_proc name, initfunc, mm_mmuflags = 0, io_mmuflags = 0, hwcaps = 0, proc_fns = v7_processor_functions
 	ALT_SMP(.long	PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | \
 			PMD_SECT_AF | PMD_FLAGS_SMP | \mm_mmuflags)
 	ALT_UP(.long	PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | \
 			PMD_SECT_AF | PMD_FLAGS_UP | \mm_mmuflags)
 	.long	PMD_TYPE_SECT | PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ | PMD_SECT_AF | \io_mmuflags
 	initfn	\initfunc, \name
 	.long	cpu_arch_name
 	.long	cpu_elf_name
 	.long	HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB | HWCAP_FAST_MULT | \
 		HWCAP_EDSP | HWCAP_TLS | \hwcaps
 	.long	cpu_v7_name
 	.long	\proc_fns
 	.long	v7wbi_tlb_fns
 	.long	v6_user_fns
 	.long	v7_cache_fns
 .endm

 #ifndef CONFIG_ARM_LPAE
 	/*
 	 * ARM Ltd. Cortex A5 processor.
 	 */
 	.type   __v7_ca5mp_proc_info, #object
 __v7_ca5mp_proc_info:
 	.long	0x410fc050
 	.long	0xff0ffff0
 	__v7_proc __v7_ca5mp_proc_info, __v7_ca5mp_setup
 	.size	__v7_ca5mp_proc_info, . - __v7_ca5mp_proc_info

 	/*
 	 * ARM Ltd. Cortex A9 processor.
 	 */
 	.type   __v7_ca9mp_proc_info, #object
 __v7_ca9mp_proc_info:
 	.long	0x410fc090
 	.long	0xff0ffff0
 	__v7_proc __v7_ca9mp_proc_info, __v7_ca9mp_setup, proc_fns = ca9mp_processor_functions
 	.size	__v7_ca9mp_proc_info, . - __v7_ca9mp_proc_info

 	/*
 	 * ARM Ltd. Cortex A8 processor.
 	 */
 	.type	__v7_ca8_proc_info, #object
 __v7_ca8_proc_info:
 	.long	0x410fc080
 	.long	0xff0ffff0
 	__v7_proc __v7_ca8_proc_info, __v7_setup, proc_fns = ca8_processor_functions
 	.size	__v7_ca8_proc_info, . - __v7_ca8_proc_info

 #endif	/* CONFIG_ARM_LPAE */

 	/*
 	 * Marvell PJ4B processor.
 	 */
 #ifdef CONFIG_CPU_PJ4B
 	.type   __v7_pj4b_proc_info, #object
 __v7_pj4b_proc_info:
 	.long	0x560f5800
 	.long	0xff0fff00
 	__v7_proc __v7_pj4b_proc_info, __v7_pj4b_setup, proc_fns = pj4b_processor_functions
 	.size	__v7_pj4b_proc_info, . - __v7_pj4b_proc_info
 #endif

 	/*
 	 * ARM Ltd. Cortex R7 processor.
 	 */
 	.type	__v7_cr7mp_proc_info, #object
 __v7_cr7mp_proc_info:
 	.long	0x410fc170
 	.long	0xff0ffff0
 	__v7_proc __v7_cr7mp_proc_info, __v7_cr7mp_setup
 	.size	__v7_cr7mp_proc_info, . - __v7_cr7mp_proc_info

 	/*
 	 * ARM Ltd. Cortex A7 processor.
 	 */
 	.type	__v7_ca7mp_proc_info, #object
 __v7_ca7mp_proc_info:
 	.long	0x410fc070
 	.long	0xff0ffff0
 	__v7_proc __v7_ca7mp_proc_info, __v7_ca7mp_setup
 	.size	__v7_ca7mp_proc_info, . - __v7_ca7mp_proc_info

 	/*
 	 * ARM Ltd. Cortex A12 processor.
 	 */
 	.type	__v7_ca12mp_proc_info, #object
 __v7_ca12mp_proc_info:
 	.long	0x410fc0d0
 	.long	0xff0ffff0
 	__v7_proc __v7_ca12mp_proc_info, __v7_ca12mp_setup
 	.size	__v7_ca12mp_proc_info, . - __v7_ca12mp_proc_info

 	/*
 	 * ARM Ltd. Cortex A15 processor.
 	 */
 	.type	__v7_ca15mp_proc_info, #object
 __v7_ca15mp_proc_info:
 	.long	0x410fc0f0
 	.long	0xff0ffff0
 	__v7_proc __v7_ca15mp_proc_info, __v7_ca15mp_setup
 	.size	__v7_ca15mp_proc_info, . - __v7_ca15mp_proc_info

 	/*
 	 * Broadcom Corporation Brahma-B15 processor.
 	 */
 	.type	__v7_b15mp_proc_info, #object
 __v7_b15mp_proc_info:
 	.long	0x420f00f0
 	.long	0xff0ffff0
 	__v7_proc __v7_b15mp_proc_info, __v7_b15mp_setup
 	.size	__v7_b15mp_proc_info, . - __v7_b15mp_proc_info

 	/*
 	 * ARM Ltd. Cortex A17 processor.
 	 */
 	.type	__v7_ca17mp_proc_info, #object
 __v7_ca17mp_proc_info:
 	.long	0x410fc0e0
 	.long	0xff0ffff0
 	__v7_proc __v7_ca17mp_proc_info, __v7_ca17mp_setup
 	.size	__v7_ca17mp_proc_info, . - __v7_ca17mp_proc_info

 	/*
 	 * Qualcomm Inc. Krait processors.
 	 */
 	.type	__krait_proc_info, #object
 __krait_proc_info:
 	.long	0x510f0400		@ Required ID value
 	.long	0xff0ffc00		@ Mask for ID
 	/*
 	 * Some Krait processors don't indicate support for SDIV and UDIV
 	 * instructions in the ARM instruction set, even though they actually
 	 * do support them. They also don't indicate support for fused multiply
 	 * instructions even though they actually do support them.
 	 */
 	__v7_proc __krait_proc_info, __v7_setup, hwcaps = HWCAP_IDIV | HWCAP_VFPv4
 	.size	__krait_proc_info, . - __krait_proc_info

 	/*
 	 * Match any ARMv7 processor core.
 	 */
 	.type	__v7_proc_info, #object
 __v7_proc_info:
 	.long	0x000f0000		@ Required ID value
 	.long	0x000f0000		@ Mask for ID
 	__v7_proc __v7_proc_info, __v7_setup
 	.size	__v7_proc_info, . - __v7_proc_info
	/*
	* linux/arch/arm/mm/proc-v7.S
	*
	* Copyright (C) 2001 Deep Blue Solutions Ltd.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*
	* This is the "shell" of the ARMv7 processor support.
	*/
	#include <linux/init.h>
	#include <linux/linkage.h>
	#include <asm/assembler.h>
	#include <asm/asm-offsets.h>
	#include <asm/hwcap.h>
	#include <asm/pgtable-hwdef.h>
	#include <asm/pgtable.h>

	#include "proc-macros.S"

	#ifdef CONFIG_ARM_LPAE
	#include "proc-v7-3level.S"
	#else
	#include "proc-v7-2level.S"
	#endif

	ENTRY(cpu_v7_proc_init)
	ret lr
	ENDPROC(cpu_v7_proc_init)

	ENTRY(cpu_v7_proc_fin)
	mrc p15, 0, r0, c1, c0, 0 @ ctrl register
	bic r0, r0, #0x1000 @ ...i............
	bic r0, r0, #0x0006 @ .............ca.
	mcr p15, 0, r0, c1, c0, 0 @ disable caches
	ret lr
	ENDPROC(cpu_v7_proc_fin)

	/*
	* cpu_v7_reset(loc)
	*
	* Perform a soft reset of the system. Put the CPU into the
	* same state as it would be if it had been reset, and branch
	* to what would be the reset vector.
	*
	* - loc - location to jump to for soft reset
	*
	* This code must be executed using a flat identity mapping with
	* caches disabled.
	*/
	.align 5
	.pushsection .idmap.text, "ax"
	ENTRY(cpu_v7_reset)
	mrc p15, 0, r1, c1, c0, 0 @ ctrl register
	bic r1, r1, #0x1 @ ...............m
	THUMB( bic r1, r1, #1 << 30 ) @ SCTLR.TE (Thumb exceptions)
	mcr p15, 0, r1, c1, c0, 0 @ disable MMU
	isb
	bx r0
	ENDPROC(cpu_v7_reset)
	.popsection

	/*
	* cpu_v7_do_idle()
	*
	* Idle the processor (eg, wait for interrupt).
	*
	* IRQs are already disabled.
	*/
	ENTRY(cpu_v7_do_idle)
	dsb @ WFI may enter a low-power mode
	wfi
	ret lr
	ENDPROC(cpu_v7_do_idle)

	ENTRY(cpu_v7_dcache_clean_area)
	ALT_SMP(W(nop)) @ MP extensions imply L1 PTW
	ALT_UP_B(1f)
	ret lr
	1: dcache_line_size r2, r3
	2: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
	add r0, r0, r2
	subs r1, r1, r2
	bhi 2b
	dsb ishst
	ret lr
	ENDPROC(cpu_v7_dcache_clean_area)

	string cpu_v7_name, "ARMv7 Processor"
	.align

	/* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */
	.globl cpu_v7_suspend_size
	.equ cpu_v7_suspend_size, 4 * 9
	#ifdef CONFIG_ARM_CPU_SUSPEND
	ENTRY(cpu_v7_do_suspend)
	stmfd sp!, {r4 - r11, lr}
	mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
	mrc p15, 0, r5, c13, c0, 3 @ User r/o thread ID
	stmia r0!, {r4 - r5}
	#ifdef CONFIG_MMU
	mrc p15, 0, r6, c3, c0, 0 @ Domain ID
	#ifdef CONFIG_ARM_LPAE
	mrrc p15, 1, r5, r7, c2 @ TTB 1
	#else
	mrc p15, 0, r7, c2, c0, 1 @ TTB 1
	#endif
	mrc p15, 0, r11, c2, c0, 2 @ TTB control register
	#endif
	mrc p15, 0, r8, c1, c0, 0 @ Control register
	mrc p15, 0, r9, c1, c0, 1 @ Auxiliary control register
	mrc p15, 0, r10, c1, c0, 2 @ Co-processor access control
	stmia r0, {r5 - r11}
	ldmfd sp!, {r4 - r11, pc}
	ENDPROC(cpu_v7_do_suspend)

	ENTRY(cpu_v7_do_resume)
	mov ip, #0
	mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
	mcr p15, 0, ip, c13, c0, 1 @ set reserved context ID
	ldmia r0!, {r4 - r5}
	mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
	mcr p15, 0, r5, c13, c0, 3 @ User r/o thread ID
	ldmia r0, {r5 - r11}
	#ifdef CONFIG_MMU
	mcr p15, 0, ip, c8, c7, 0 @ invalidate TLBs
	mcr p15, 0, r6, c3, c0, 0 @ Domain ID
	#ifdef CONFIG_ARM_LPAE
	mcrr p15, 0, r1, ip, c2 @ TTB 0
	mcrr p15, 1, r5, r7, c2 @ TTB 1
	#else
	ALT_SMP(orr r1, r1, #TTB_FLAGS_SMP)
	ALT_UP(orr r1, r1, #TTB_FLAGS_UP)
	mcr p15, 0, r1, c2, c0, 0 @ TTB 0
	mcr p15, 0, r7, c2, c0, 1 @ TTB 1
	#endif
	mcr p15, 0, r11, c2, c0, 2 @ TTB control register
	ldr r4, =PRRR @ PRRR
	ldr r5, =NMRR @ NMRR
	mcr p15, 0, r4, c10, c2, 0 @ write PRRR
	mcr p15, 0, r5, c10, c2, 1 @ write NMRR
	#endif /* CONFIG_MMU */
	mrc p15, 0, r4, c1, c0, 1 @ Read Auxiliary control register
	teq r4, r9 @ Is it already set?
	mcrne p15, 0, r9, c1, c0, 1 @ No, so write it
	mcr p15, 0, r10, c1, c0, 2 @ Co-processor access control
	isb
	dsb
	mov r0, r8 @ control register
	b cpu_resume_mmu
	ENDPROC(cpu_v7_do_resume)
	#endif

	/*
	* Cortex-A8
	*/
	globl_equ cpu_ca8_proc_init, cpu_v7_proc_init
	globl_equ cpu_ca8_proc_fin, cpu_v7_proc_fin
	globl_equ cpu_ca8_reset, cpu_v7_reset
	globl_equ cpu_ca8_do_idle, cpu_v7_do_idle
	globl_equ cpu_ca8_dcache_clean_area, cpu_v7_dcache_clean_area
	globl_equ cpu_ca8_set_pte_ext, cpu_v7_set_pte_ext
	globl_equ cpu_ca8_suspend_size, cpu_v7_suspend_size
	#ifdef CONFIG_ARM_CPU_SUSPEND
	globl_equ cpu_ca8_do_suspend, cpu_v7_do_suspend
	globl_equ cpu_ca8_do_resume, cpu_v7_do_resume
	#endif

	/*
	* Cortex-A9 processor functions
	*/
	globl_equ cpu_ca9mp_proc_init, cpu_v7_proc_init
	globl_equ cpu_ca9mp_proc_fin, cpu_v7_proc_fin
	globl_equ cpu_ca9mp_reset, cpu_v7_reset
	globl_equ cpu_ca9mp_do_idle, cpu_v7_do_idle
	globl_equ cpu_ca9mp_dcache_clean_area, cpu_v7_dcache_clean_area
	globl_equ cpu_ca9mp_switch_mm, cpu_v7_switch_mm
	globl_equ cpu_ca9mp_set_pte_ext, cpu_v7_set_pte_ext
	.globl cpu_ca9mp_suspend_size
	.equ cpu_ca9mp_suspend_size, cpu_v7_suspend_size + 4 * 2
	#ifdef CONFIG_ARM_CPU_SUSPEND
	ENTRY(cpu_ca9mp_do_suspend)
	stmfd sp!, {r4 - r5}
	mrc p15, 0, r4, c15, c0, 1 @ Diagnostic register
	mrc p15, 0, r5, c15, c0, 0 @ Power register
	stmia r0!, {r4 - r5}
	ldmfd sp!, {r4 - r5}
	b cpu_v7_do_suspend
	ENDPROC(cpu_ca9mp_do_suspend)

	ENTRY(cpu_ca9mp_do_resume)
	ldmia r0!, {r4 - r5}
	mrc p15, 0, r10, c15, c0, 1 @ Read Diagnostic register
	teq r4, r10 @ Already restored?
	mcrne p15, 0, r4, c15, c0, 1 @ No, so restore it
	mrc p15, 0, r10, c15, c0, 0 @ Read Power register
	teq r5, r10 @ Already restored?
	mcrne p15, 0, r5, c15, c0, 0 @ No, so restore it
	b cpu_v7_do_resume
	ENDPROC(cpu_ca9mp_do_resume)
	#endif

	#ifdef CONFIG_CPU_PJ4B
	globl_equ cpu_pj4b_switch_mm, cpu_v7_switch_mm
	globl_equ cpu_pj4b_set_pte_ext, cpu_v7_set_pte_ext
	globl_equ cpu_pj4b_proc_init, cpu_v7_proc_init
	globl_equ cpu_pj4b_proc_fin, cpu_v7_proc_fin
	globl_equ cpu_pj4b_reset, cpu_v7_reset
	#ifdef CONFIG_PJ4B_ERRATA_4742
	ENTRY(cpu_pj4b_do_idle)
	dsb @ WFI may enter a low-power mode
	wfi
	dsb @barrier
	ret lr
	ENDPROC(cpu_pj4b_do_idle)
	#else
	globl_equ cpu_pj4b_do_idle, cpu_v7_do_idle
	#endif
	globl_equ cpu_pj4b_dcache_clean_area, cpu_v7_dcache_clean_area
	#ifdef CONFIG_ARM_CPU_SUSPEND
	ENTRY(cpu_pj4b_do_suspend)
	stmfd sp!, {r6 - r10}
	mrc p15, 1, r6, c15, c1, 0 @ save CP15 - extra features
	mrc p15, 1, r7, c15, c2, 0 @ save CP15 - Aux Func Modes Ctrl 0
	mrc p15, 1, r8, c15, c1, 2 @ save CP15 - Aux Debug Modes Ctrl 2
	mrc p15, 1, r9, c15, c1, 1 @ save CP15 - Aux Debug Modes Ctrl 1
	mrc p15, 0, r10, c9, c14, 0 @ save CP15 - PMC
	stmia r0!, {r6 - r10}
	ldmfd sp!, {r6 - r10}
	b cpu_v7_do_suspend
	ENDPROC(cpu_pj4b_do_suspend)

	ENTRY(cpu_pj4b_do_resume)
	ldmia r0!, {r6 - r10}
	mcr p15, 1, r6, c15, c1, 0 @ restore CP15 - extra features
	mcr p15, 1, r7, c15, c2, 0 @ restore CP15 - Aux Func Modes Ctrl 0
	mcr p15, 1, r8, c15, c1, 2 @ restore CP15 - Aux Debug Modes Ctrl 2
	mcr p15, 1, r9, c15, c1, 1 @ restore CP15 - Aux Debug Modes Ctrl 1
	mcr p15, 0, r10, c9, c14, 0 @ restore CP15 - PMC
	b cpu_v7_do_resume
	ENDPROC(cpu_pj4b_do_resume)
	#endif
	.globl cpu_pj4b_suspend_size
	.equ cpu_pj4b_suspend_size, cpu_v7_suspend_size + 4 * 5

	#endif

	/*
	* __v7_setup
	*
	* Initialise TLB, Caches, and MMU state ready to switch the MMU
	* on. Return in r0 the new CP15 C1 control register setting.
	*
	* r1, r2, r4, r5, r9, r13 must be preserved - r13 is not a stack
	* r4: TTBR0 (low word)
	* r5: TTBR0 (high word if LPAE)
	* r8: TTBR1
	* r9: Main ID register
	*
	* This should be able to cover all ARMv7 cores.
	*
	* It is assumed that:
	* - cache type register is implemented
	*/
	__v7_ca5mp_setup:
	__v7_ca9mp_setup:
	__v7_cr7mp_setup:
	mov r10, #(1 << 0) @ Cache/TLB ops broadcasting
	b 1f
	__v7_ca7mp_setup:
	__v7_ca12mp_setup:
	__v7_ca15mp_setup:
	__v7_b15mp_setup:
	__v7_ca17mp_setup:
	mov r10, #0
	1: adr r0, __v7_setup_stack_ptr
	ldr r12, [r0]
	add r12, r12, r0 @ the local stack
	stmia r12, {r1-r6, lr} @ v7_invalidate_l1 touches r0-r6
	bl v7_invalidate_l1
	ldmia r12, {r1-r6, lr}
	#ifdef CONFIG_SMP
	ALT_SMP(mrc p15, 0, r0, c1, c0, 1)
	ALT_UP(mov r0, #(1 << 6)) @ fake it for UP
	tst r0, #(1 << 6) @ SMP/nAMP mode enabled?
	orreq r0, r0, #(1 << 6) @ Enable SMP/nAMP mode
	orreq r0, r0, r10 @ Enable CPU-specific SMP bits
	mcreq p15, 0, r0, c1, c0, 1
	#endif
	b __v7_setup_cont

	/*
	* Errata:
	* r0, r10 available for use
	* r1, r2, r4, r5, r9, r13: must be preserved
	* r3: contains MIDR rX number in bits 23-20
	* r6: contains MIDR rXpY as 8-bit XY number
	* r9: MIDR
	*/
	__ca8_errata:
	#if defined(CONFIG_ARM_ERRATA_430973) && !defined(CONFIG_ARCH_MULTIPLATFORM)
	teq r3, #0x00100000 @ only present in r1p*
	mrceq p15, 0, r0, c1, c0, 1 @ read aux control register
	orreq r0, r0, #(1 << 6) @ set IBE to 1
	mcreq p15, 0, r0, c1, c0, 1 @ write aux control register
	#endif
	#ifdef CONFIG_ARM_ERRATA_458693
	teq r6, #0x20 @ only present in r2p0
	mrceq p15, 0, r0, c1, c0, 1 @ read aux control register
	orreq r0, r0, #(1 << 5) @ set L1NEON to 1
	orreq r0, r0, #(1 << 9) @ set PLDNOP to 1
	mcreq p15, 0, r0, c1, c0, 1 @ write aux control register
	#endif
	#ifdef CONFIG_ARM_ERRATA_460075
	teq r6, #0x20 @ only present in r2p0
	mrceq p15, 1, r0, c9, c0, 2 @ read L2 cache aux ctrl register
	tsteq r0, #1 << 22
	orreq r0, r0, #(1 << 22) @ set the Write Allocate disable bit
	mcreq p15, 1, r0, c9, c0, 2 @ write the L2 cache aux ctrl register
	#endif
	b __errata_finish

	__ca9_errata:
	#ifdef CONFIG_ARM_ERRATA_742230
	cmp r6, #0x22 @ only present up to r2p2
	mrcle p15, 0, r0, c15, c0, 1 @ read diagnostic register
	orrle r0, r0, #1 << 4 @ set bit #4
	mcrle p15, 0, r0, c15, c0, 1 @ write diagnostic register
	#endif
	#ifdef CONFIG_ARM_ERRATA_742231
	teq r6, #0x20 @ present in r2p0
	teqne r6, #0x21 @ present in r2p1
	teqne r6, #0x22 @ present in r2p2
	mrceq p15, 0, r0, c15, c0, 1 @ read diagnostic register
	orreq r0, r0, #1 << 12 @ set bit #12
	orreq r0, r0, #1 << 22 @ set bit #22
	mcreq p15, 0, r0, c15, c0, 1 @ write diagnostic register
	#endif
	#ifdef CONFIG_ARM_ERRATA_743622
	teq r3, #0x00200000 @ only present in r2p*
	mrceq p15, 0, r0, c15, c0, 1 @ read diagnostic register
	orreq r0, r0, #1 << 6 @ set bit #6
	mcreq p15, 0, r0, c15, c0, 1 @ write diagnostic register
	#endif
	#if defined(CONFIG_ARM_ERRATA_751472) && defined(CONFIG_SMP)
	ALT_SMP(cmp r6, #0x30) @ present prior to r3p0
	ALT_UP_B(1f)
	mrclt p15, 0, r0, c15, c0, 1 @ read diagnostic register
	orrlt r0, r0, #1 << 11 @ set bit #11
	mcrlt p15, 0, r0, c15, c0, 1 @ write diagnostic register
	1:
	#endif
	b __errata_finish

	__ca15_errata:
	#ifdef CONFIG_ARM_ERRATA_773022
	cmp r6, #0x4 @ only present up to r0p4
	mrcle p15, 0, r0, c1, c0, 1 @ read aux control register
	orrle r0, r0, #1 << 1 @ disable loop buffer
	mcrle p15, 0, r0, c1, c0, 1 @ write aux control register
	#endif
	b __errata_finish

	__v7_pj4b_setup:
	#ifdef CONFIG_CPU_PJ4B

	/* Auxiliary Debug Modes Control 1 Register */
	#define PJ4B_STATIC_BP (1 << 2) /* Enable Static BP */
	#define PJ4B_INTER_PARITY (1 << 8) /* Disable Internal Parity Handling */
	#define PJ4B_CLEAN_LINE (1 << 16) /* Disable data transfer for clean line */

	/* Auxiliary Debug Modes Control 2 Register */
	#define PJ4B_FAST_LDR (1 << 23) /* Disable fast LDR */
	#define PJ4B_SNOOP_DATA (1 << 25) /* Do not interleave write and snoop data */
	#define PJ4B_CWF (1 << 27) /* Disable Critical Word First feature */
	#define PJ4B_OUTSDNG_NC (1 << 29) /* Disable outstanding non cacheable rqst */
	#define PJ4B_L1_REP_RR (1 << 30) /* L1 replacement - Strict round robin */
	#define PJ4B_AUX_DBG_CTRL2 (PJ4B_SNOOP_DATA \| PJ4B_CWF \|\
	PJ4B_OUTSDNG_NC \| PJ4B_L1_REP_RR)

	/* Auxiliary Functional Modes Control Register 0 */
	#define PJ4B_SMP_CFB (1 << 1) /* Set SMP mode. Join the coherency fabric */
	#define PJ4B_L1_PAR_CHK (1 << 2) /* Support L1 parity checking */
	#define PJ4B_BROADCAST_CACHE (1 << 8) /* Broadcast Cache and TLB maintenance */

	/* Auxiliary Debug Modes Control 0 Register */
	#define PJ4B_WFI_WFE (1 << 22) /* WFI/WFE - serve the DVM and back to idle */

	/* Auxiliary Debug Modes Control 1 Register */
	mrc p15, 1, r0, c15, c1, 1
	orr r0, r0, #PJ4B_CLEAN_LINE
	orr r0, r0, #PJ4B_INTER_PARITY
	bic r0, r0, #PJ4B_STATIC_BP
	mcr p15, 1, r0, c15, c1, 1

	/* Auxiliary Debug Modes Control 2 Register */
	mrc p15, 1, r0, c15, c1, 2
	bic r0, r0, #PJ4B_FAST_LDR
	orr r0, r0, #PJ4B_AUX_DBG_CTRL2
	mcr p15, 1, r0, c15, c1, 2

	/* Auxiliary Functional Modes Control Register 0 */
	mrc p15, 1, r0, c15, c2, 0
	#ifdef CONFIG_SMP
	orr r0, r0, #PJ4B_SMP_CFB
	#endif
	orr r0, r0, #PJ4B_L1_PAR_CHK
	orr r0, r0, #PJ4B_BROADCAST_CACHE
	mcr p15, 1, r0, c15, c2, 0

	/* Auxiliary Debug Modes Control 0 Register */
	mrc p15, 1, r0, c15, c1, 0
	orr r0, r0, #PJ4B_WFI_WFE
	mcr p15, 1, r0, c15, c1, 0

	#endif /* CONFIG_CPU_PJ4B */

	__v7_setup:
	adr r0, __v7_setup_stack_ptr
	ldr r12, [r0]
	add r12, r12, r0 @ the local stack
	stmia r12, {r1-r6, lr} @ v7_invalidate_l1 touches r0-r6
	bl v7_invalidate_l1
	ldmia r12, {r1-r6, lr}

	__v7_setup_cont:
	and r0, r9, #0xff000000 @ ARM?
	teq r0, #0x41000000
	bne __errata_finish
	and r3, r9, #0x00f00000 @ variant
	and r6, r9, #0x0000000f @ revision
	orr r6, r6, r3, lsr #20-4 @ combine variant and revision
	ubfx r0, r9, #4, #12 @ primary part number

	/* Cortex-A8 Errata */
	ldr r10, =0x00000c08 @ Cortex-A8 primary part number
	teq r0, r10
	beq __ca8_errata

	/* Cortex-A9 Errata */
	ldr r10, =0x00000c09 @ Cortex-A9 primary part number
	teq r0, r10
	beq __ca9_errata

	/* Cortex-A15 Errata */
	ldr r10, =0x00000c0f @ Cortex-A15 primary part number
	teq r0, r10
	beq __ca15_errata

	__errata_finish:
	mov r10, #0
	mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate
	#ifdef CONFIG_MMU
	mcr p15, 0, r10, c8, c7, 0 @ invalidate I + D TLBs
	v7_ttb_setup r10, r4, r5, r8, r3 @ TTBCR, TTBRx setup
	ldr r3, =PRRR @ PRRR
	ldr r6, =NMRR @ NMRR
	mcr p15, 0, r3, c10, c2, 0 @ write PRRR
	mcr p15, 0, r6, c10, c2, 1 @ write NMRR
	#endif
	dsb @ Complete invalidations
	#ifndef CONFIG_ARM_THUMBEE
	mrc p15, 0, r0, c0, c1, 0 @ read ID_PFR0 for ThumbEE
	and r0, r0, #(0xf << 12) @ ThumbEE enabled field
	teq r0, #(1 << 12) @ check if ThumbEE is present
	bne 1f
	mov r3, #0
	mcr p14, 6, r3, c1, c0, 0 @ Initialize TEEHBR to 0
	mrc p14, 6, r0, c0, c0, 0 @ load TEECR
	orr r0, r0, #1 @ set the 1st bit in order to
	mcr p14, 6, r0, c0, c0, 0 @ stop userspace TEEHBR access
	1:
	#endif
	adr r3, v7_crval
	ldmia r3, {r3, r6}
	ARM_BE8(orr r6, r6, #1 << 25) @ big-endian page tables
	#ifdef CONFIG_SWP_EMULATE
	orr r3, r3, #(1 << 10) @ set SW bit in "clear"
	bic r6, r6, #(1 << 10) @ clear it in "mmuset"
	#endif
	mrc p15, 0, r0, c1, c0, 0 @ read control register
	bic r0, r0, r3 @ clear bits them
	orr r0, r0, r6 @ set them
	THUMB( orr r0, r0, #1 << 30 ) @ Thumb exceptions
	ret lr @ return to head.S:__ret

	.align 2
	__v7_setup_stack_ptr:
	.word __v7_setup_stack - .
	ENDPROC(__v7_setup)

	.bss
	.align 2
	__v7_setup_stack:
	.space 4 * 7 @ 7 registers

	__INITDATA

	@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
	define_processor_functions v7, dabort=v7_early_abort, pabort=v7_pabort, suspend=1
	#ifndef CONFIG_ARM_LPAE
	define_processor_functions ca8, dabort=v7_early_abort, pabort=v7_pabort, suspend=1
	define_processor_functions ca9mp, dabort=v7_early_abort, pabort=v7_pabort, suspend=1
	#endif
	#ifdef CONFIG_CPU_PJ4B
	define_processor_functions pj4b, dabort=v7_early_abort, pabort=v7_pabort, suspend=1
	#endif

	.section ".rodata"

	string cpu_arch_name, "armv7"
	string cpu_elf_name, "v7"
	.align

	.section ".proc.info.init", #alloc

	/*
	* Standard v7 proc info content
	*/
	.macro __v7_proc name, initfunc, mm_mmuflags = 0, io_mmuflags = 0, hwcaps = 0, proc_fns = v7_processor_functions
	ALT_SMP(.long PMD_TYPE_SECT \| PMD_SECT_AP_WRITE \| PMD_SECT_AP_READ \| \
	PMD_SECT_AF \| PMD_FLAGS_SMP \| \mm_mmuflags)
	ALT_UP(.long PMD_TYPE_SECT \| PMD_SECT_AP_WRITE \| PMD_SECT_AP_READ \| \
	PMD_SECT_AF \| PMD_FLAGS_UP \| \mm_mmuflags)
	.long PMD_TYPE_SECT \| PMD_SECT_AP_WRITE \| \
	PMD_SECT_AP_READ \| PMD_SECT_AF \| \io_mmuflags
	initfn \initfunc, \name
	.long cpu_arch_name
	.long cpu_elf_name
	.long HWCAP_SWP \| HWCAP_HALF \| HWCAP_THUMB \| HWCAP_FAST_MULT \| \
	HWCAP_EDSP \| HWCAP_TLS \| \hwcaps
	.long cpu_v7_name
	.long \proc_fns
	.long v7wbi_tlb_fns
	.long v6_user_fns
	.long v7_cache_fns
	.endm

	#ifndef CONFIG_ARM_LPAE
	/*
	* ARM Ltd. Cortex A5 processor.
	*/
	.type __v7_ca5mp_proc_info, #object
	__v7_ca5mp_proc_info:
	.long 0x410fc050
	.long 0xff0ffff0
	__v7_proc __v7_ca5mp_proc_info, __v7_ca5mp_setup
	.size __v7_ca5mp_proc_info, . - __v7_ca5mp_proc_info

	/*
	* ARM Ltd. Cortex A9 processor.
	*/
	.type __v7_ca9mp_proc_info, #object
	__v7_ca9mp_proc_info:
	.long 0x410fc090
	.long 0xff0ffff0
	__v7_proc __v7_ca9mp_proc_info, __v7_ca9mp_setup, proc_fns = ca9mp_processor_functions
	.size __v7_ca9mp_proc_info, . - __v7_ca9mp_proc_info

	/*
	* ARM Ltd. Cortex A8 processor.
	*/
	.type __v7_ca8_proc_info, #object
	__v7_ca8_proc_info:
	.long 0x410fc080
	.long 0xff0ffff0
	__v7_proc __v7_ca8_proc_info, __v7_setup, proc_fns = ca8_processor_functions
	.size __v7_ca8_proc_info, . - __v7_ca8_proc_info

	#endif /* CONFIG_ARM_LPAE */

	/*
	* Marvell PJ4B processor.
	*/
	#ifdef CONFIG_CPU_PJ4B
	.type __v7_pj4b_proc_info, #object
	__v7_pj4b_proc_info:
	.long 0x560f5800
	.long 0xff0fff00
	__v7_proc __v7_pj4b_proc_info, __v7_pj4b_setup, proc_fns = pj4b_processor_functions
	.size __v7_pj4b_proc_info, . - __v7_pj4b_proc_info
	#endif

	/*
	* ARM Ltd. Cortex R7 processor.
	*/
	.type __v7_cr7mp_proc_info, #object
	__v7_cr7mp_proc_info:
	.long 0x410fc170
	.long 0xff0ffff0
	__v7_proc __v7_cr7mp_proc_info, __v7_cr7mp_setup
	.size __v7_cr7mp_proc_info, . - __v7_cr7mp_proc_info

	/*
	* ARM Ltd. Cortex A7 processor.
	*/
	.type __v7_ca7mp_proc_info, #object
	__v7_ca7mp_proc_info:
	.long 0x410fc070
	.long 0xff0ffff0
	__v7_proc __v7_ca7mp_proc_info, __v7_ca7mp_setup
	.size __v7_ca7mp_proc_info, . - __v7_ca7mp_proc_info

	/*
	* ARM Ltd. Cortex A12 processor.
	*/
	.type __v7_ca12mp_proc_info, #object
	__v7_ca12mp_proc_info:
	.long 0x410fc0d0
	.long 0xff0ffff0
	__v7_proc __v7_ca12mp_proc_info, __v7_ca12mp_setup
	.size __v7_ca12mp_proc_info, . - __v7_ca12mp_proc_info

	/*
	* ARM Ltd. Cortex A15 processor.
	*/
	.type __v7_ca15mp_proc_info, #object
	__v7_ca15mp_proc_info:
	.long 0x410fc0f0
	.long 0xff0ffff0
	__v7_proc __v7_ca15mp_proc_info, __v7_ca15mp_setup
	.size __v7_ca15mp_proc_info, . - __v7_ca15mp_proc_info

	/*
	* Broadcom Corporation Brahma-B15 processor.
	*/
	.type __v7_b15mp_proc_info, #object
	__v7_b15mp_proc_info:
	.long 0x420f00f0
	.long 0xff0ffff0
	__v7_proc __v7_b15mp_proc_info, __v7_b15mp_setup
	.size __v7_b15mp_proc_info, . - __v7_b15mp_proc_info

	/*
	* ARM Ltd. Cortex A17 processor.
	*/
	.type __v7_ca17mp_proc_info, #object
	__v7_ca17mp_proc_info:
	.long 0x410fc0e0
	.long 0xff0ffff0
	__v7_proc __v7_ca17mp_proc_info, __v7_ca17mp_setup
	.size __v7_ca17mp_proc_info, . - __v7_ca17mp_proc_info

	/*
	* Qualcomm Inc. Krait processors.
	*/
	.type __krait_proc_info, #object
	__krait_proc_info:
	.long 0x510f0400 @ Required ID value
	.long 0xff0ffc00 @ Mask for ID
	/*
	* Some Krait processors don't indicate support for SDIV and UDIV
	* instructions in the ARM instruction set, even though they actually
	* do support them. They also don't indicate support for fused multiply
	* instructions even though they actually do support them.
	*/
	__v7_proc __krait_proc_info, __v7_setup, hwcaps = HWCAP_IDIV \| HWCAP_VFPv4
	.size __krait_proc_info, . - __krait_proc_info

	/*
	* Match any ARMv7 processor core.
	*/
	.type __v7_proc_info, #object
	__v7_proc_info:
	.long 0x000f0000 @ Required ID value
	.long 0x000f0000 @ Mask for ID
	__v7_proc __v7_proc_info, __v7_setup
	.size __v7_proc_info, . - __v7_proc_info